SHEET METAL MICROMETER DIGITAL SHEET METAL MICROMETER D (mm) Accuracy. 5μm 5μm 6μm 5μm mm 0-25mm 0-25mm 0-25mm A B B C
|
|
- Frederick Martin
- 5 years ago
- Views:
Transcription
1 SHEET MET MICROMETER type type type C Type F F 29-25S -25mm -25mm -25mm -25mm C Deep frame suitale for sheet metal, paper and plastic Graduation.1mm Caride measuring faces DIGIT SHEET MET MICROMETER type type type C Type F F 59-25S -25mm/-1" -25mm/-1" -25mm/-1" -25mm/-1" C ± ± ± ± Deep frame suitale for sheet metal, paper and plastic Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Caride measuring faces Optional accessory: SPC cale (page 1-2) D19
2 DISK RKE MICROMETER mm 25-5mm Measure thickness of disk rakes Graduation.1mm Caride measuring faces Supplied with setting standards DIGIT DISK RKE MICROMETER mm/.-1." 25-5mm/1-2" ± ± Measure thickness of disk rakes Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Caride measuring faces Supplied with setting standards Optional accessory: SPC cale (page 1-2) D2
3 V-NVI MICROMETER º flutes mm 5-2mm Flutes 18º mm mm mm 65-8mm 5 flutes mm 5-25mm 25-45mm 45-65mm 65-85mm μm 7μm Measure the outside diameter of cutting tools(such as taps, reamers, end mills) with or 5 flutes Graduation.1mm Caride measuring faces Supplied with setting standards DIGIT V-NVI MICROMETER mm/.4-.6" 5-2mm/.2-.8" 2-5mm/.8-1.4" 5-5mm/1.4-2." Flutes ± ± ± ± Measure the outside diameter of cutting tools (such as taps, reamers, end mills) with flutes Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Caride measuring faces Supplied with setting standards Optional accessory: SPC cale (page 1-2) D21
4 INTERCHNGEE NVI MICROMETER Measure tue thickness, shoulder edge distance, rivet head height, etc. Supplied with flat anvil and rod anvil Graduation.1mm Caride spindle tip Setting standards are included(except -25mm) d mm 28.5 Ø mm 5.5 DIGIT INTERCHNGEE NVI MICROMETER d Rod anvil Flat anvil Measure tue thickness, shoulder edge distance, rivet head height, etc. Supplied with flat anvil and rod anvil Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Caride spindle tip Setting standards are included(except -25mm/-1") Optional accessory: SPC cale (page 1-2) d Rod anvil Flat anvil d mm/-1" ± 28.5 Ø mm/1-2" ± 5.5 D22
5 UNIVERS MICROMETER standard anvil/spindle tip Flat Spherical Spline Ø2 Disk Ø12 lade.7 Graduation.1mm Supplied with 7 pairs of anvil/spindle tip Setting standards are included(except -25mm) Optional accessary: 55 anvil/spindle tip(code 28-SP1 and 28-SP2) Knife-edge Point.5 Ø. 6 6 optional 55 anvil/spindle tip mm 25-5mm SP1 Knife-edge 28-SP2 Point.5 Ø D2
6 DIGIT UNIVERS MICROMETER mm/-1" ± 25-5mm/1-2" ± Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Supplied with 7 pairs of anvil/spindle tip(same as series 28, previous page) Setting standards are included(except -25mm/-1") Optional accessary: 55 anvil/spindle tip code 28-SP1and 28-SP2 (same as series 28, previous page), SPC cale(page 1-2) DISK MICROMETER c Measure root tangent length of gear Graduation.1mm Supplied with setting standards(except -25mm) c D S d D mm 25-5mm Ø2 Ø2.7.7 S d mm Ø mm Ø mm Ø.9 Ø mm Ø.9 Ø mm 7μm Ø.9 Ø mm 7μm Ø.9 Ø12 D24
7 NON ROTTING SPINDE DISK MICROMETER Measure root tangent length of gear Resolution.1mm/.5" Non-rotating spindle utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Supplied with setting standards(except -25mm/-1") Optional accessory: SPC cale (page 1-2) Ø mm 25-5mm 5-75mm 75-1mm Measure root tangent length of gear Graduation.1mm Non-rotating spindle Supplied with setting standards(except -25mm) DIGIT NON ROTTING SPINDE DISK MICROMETER mm/-1" ± 4 2 Ø mm/1-2" ± mm/2-" ± mm/-4" ± D25
8 GER TOOTH MICROMETER all tips are not included Micrometer head accuracy all tips accuracy mm 8μm mm 8μm mm 1μm mm 1-125mm mm mm 7μm 1μm Measure over-pin diameter of gears Graduation.1mm Supplied with setting standards(except -25mm) Optional accessary: all tips(code 791, next page) DIGIT GER TOOTH MICROMETER all tips are not included mm/-1" 25-5mm/1-2" 5-75mm/2-" 75-1mm/-4" Μicrometer head accuracy ± ± ± ± all tips accuracy 8μm 8μm 1μm 1μm Measure over-pin diameter of gears Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Supplied with setting standards(except -25mm/-1") Optional accessary: all tips(code 791, next page), SPC cale(page 1-2) D26
9 TIPS FOR GER TOOTH MICROMETER all dia.(d) Module 791-T1 SØ1mm T2 SØ1.5mm T SØ2.mm T4 SØ2.5mm T5 791-T5 SØ.mm T6 SØ.5mm T7 SØ4.mm T8 791-T9 791-T1 SØ4.5mm S.mm SØ6.mm D 791-TS 1 pairs/set, including all aove tips MESURING TIPS FOR SCREW THRED MICROMETER Metric and unified thread (6 thread angle) Pitch 781-T mm/ 64-48TPI 781-T mm/ 44-28TPI 781-T mm/ 24-14TPI 781-T14 2-mm/ 1-9TPI 781-T15.5-5mm/ 8-5TPI 781-T mm/ TPI 781-TS 6 pairs/set, including all aove tips 781-T11 Whitworth thread (55 thread angle) 781-T21 Pitch 6-48TPI T TPI 781-T2 4-2TPI 6 thread angle 781-T TPI 781-T TPI 781-T T TPI 14-1TPI T T29 1-7TPI 7-4.5TPI 55 thread angle 781-T TPI 781-T2S 1 pairs/set, including all aove tips D27
10 measuring tips are not included SCREW THRED MICROMETER setting standards(included) mm 25-5mm Micrometer head accuracy Measuring tips accuracy 8μm 8μm setting standards(optional) code 281-SP mm 75-1mm 1-125mm mm mm 175-2mm 7μm 7μm 1μm 1μm Measure pitch diameter of screw threads Graduation.1mm Non-rotating spindle Supplied with 6 setting standards(except -25mm) Optional accessary: 55 setting standards (code 281-SP), measuring tips (code 781, previous page) measuring tips are not included DIGIT SCREW THRED MICROMETER setting standards(included) 55 setting standards(optional) code 281-SP mm/-1" 25-5mm/1-2" 5-75mm/2-" 75-1mm/-4" Micrometer head accuracy ± ± ± ± Measuring tips accuracy 8μm 8μm 1μm 1μm Measure pitch diameter of screw threads Resolution.1mm/.5" utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Non- rotating spindle Supplied with 6 setting standards (except -25mm/-1") Optional accessary: 55 setting standards (code 281-SP), measuring tips (code 781, previous page), SPC cale (page 1-2) D28
11 HU MICROMETER H h2 h1 h1 h2 H mm 25-5mm 5-75mm 75-1mm Measure hu thickness and shoulder inside a ore Graduation.1mm Caride measuring faces Supplied with setting standards(except -25mm) WIRE MICROMETER Measure diameter of wires and small alls Graduation.1mm Caride measuring faces Ø mm D29
12 CIPER TYPE MICROMETER Ø mm 25-5mm Graduation.1mm Non-rotating spindle Caride measuring faces Supplied with setting standards(except -25mm) SHEET MET MICROMETER Ø Measure thickness of sheet metal, paper, plastic and ruer parts Graduation.1mm Caride measuring faces mm D
13 CN SEM MICROMETER Ø6 SR. 4º Ø1.5 Ø Ø º 6 Ø Ø Ø Ø1.5 5º 1.5 Ø for steel cans for aluminum cans for sprayer cans mm mm -1mm Measure the width, height and depth of can seams Graduation.1mm D1
14 MICROMETER STND Suitale for micrometers up to 1mm 6 6 MICROMETER STND Suitale for micrometers up to 1mm OPTIC PRE Check the flatness and parallelism of measuring faces of micrometer Parallels included 12mm, 12.12mm, 12.25mm, 12.7mm 25mm, 25.12mm, 25.25mm, 25.7mm D2
15 type D MICROMETER SETTING STNDRD type mm 25mm 5mm 75mm 4mm 425mm 45mm 475mm 5mm 525mm 575mm 625mm 675mm 725mm 775mm 825mm 875mm 925mm 975mm mm 115mm 125mm 15mm 145mm 155mm 165mm 175mm 185mm 195mm ± ±7. ±8μm ±8. ±9μm ±9. ±1μm ±1. ±11μm ±11. ±12. ±1. ±14. ±15. ±16. ±17. ±18. ±19. ±2. 7μm ± μm ±2 ±2 ±28μm ±μm ±2μm ± ± ±8μm ± Size 25mm 5mm 75mm 1mm 125mm 15mm 175mm 2mm 225mm 25mm 275mm Type ±1. ±2μm ±2. ±μm ±. ± ±4. ± ±5. ± ±6. Ø 16mm Ø Ø2mm Ø2mm Ø2mm Ø2mm Ø2mm Ø2mm Ø2mm Ø2mm Ø2mm 2mm D Ø Ø7mm Ø7mm mm mm mm mm mm mm mm mm 7mm D D
16 DIGIT MICROMETER HED 46 (21) (9) M12X Ø (9) 46 (21) 65-25W Ø Ø WS (142) 88.5 (8.5) 65-5W Resolution.1mm/.5" IP54 waterproof utton function: on/off, set, mm/inch, S/INC, data output RS22 data output SR44 or R44 attery, automatic power off Optional accessary: SPC cale (page 1-2) 1 Ø11 Ø (2) (9) W Rotating spindle Stem Spindle tip mm/-1" ±2µm 65-25W -25mm/-1" 65-25S -25mm/-1" spherical () 65-25WS -25mm/-1" spherical () 65-5W -5mm/-2" ±2µm ±2µm ±2µm ±4µm Non-rotating spindle Stem Spindle tip W -25mm/-1" ±2µm D4
17 SM MICROMETER HED SR1.5 Ø2 Ø Ø6 Graduation.2mm 672-5WS Stem Spindle tip (6.5) 2.5 (25.5) 672-5WS -5mm spherical (SR1.5) 5µm SM MICROMETER HED Ø.5 M6X.5 Ø6 -.9 Ø9.4 SR Ø6 -.9 Ø W 6 (7) () Ø (7) 2.5 () Graduation.1mm WS W -6.5mm -6.5mm Stem Spindle tip S -6.5mm spherical (SR) WS -6.5mm spherical (SR) 5µm 5µm 5µm 5µm RGE THIME MICROMETER HED MX Ø2 SR -.9 Ø14 Ø2 4 (12) () 18.5 (12) 2.5 () WS arge thimle diameter for easy reading Graduation.1mm Stem Spindle tip W 67-65S 67-65WS W -6.5mm -6.5mm -6.5mm -6.5mm -1mm -1mm spherical(sr) spherical(sr) Ø14 MX Ø29 (12) (4) Ø29 (12) 67-1W (4) D5
18 MICROMETER HED MX.5 Ø -.9 Ø1 Ø -.9 Ø W Ø Ø 686-1P Graduation.1mm W 686-1S 686-1WS 686-1P 686-1WP Stem Spindle tip Remark with spindle lock with spindle lock MICROMETER HED WITH ZERO DJUSTE THIME MX.5 4 (1.5) (45) 26.5 (1.5) 2 (45) 686-1WS MX.5 Ø1 -.9 Ø Ø1 Ø14 4 (1.5) 4.5 (1.5) (5.5) 26.5 (5.5) 686-1P 686-1WP -1mm -1mm -1mm -1mm -1mm -1mm spherical () spherical () Ø -.9 Ø W Ø (12) (48.5) Graduation.1mm The thimle can e set to zero at any position Ø -.9 Ø W -1mm -1mm Stem Spindle tip 25 (12) 684-1W 5.5 (48.5) D6
19 MICROMETER HED MX.5 Ø -.9 Ø WS Ø14 4 (11.5) (4) Graduation.1mm Stem Spindle tip Ø -.9 Ø W S WS -15mm -15mm -15mm -15mm spherical () spherical () 26.5 (11.5) WS 4.5 (4) MICROMETER HED Ø14 MX.5 Ø (17) (91) Ø P (17) 66 (91) WS M Ø Ø2 Ø (17) 79 (14) P (17) (14) WP Stem Spindle tip Remark mm W S WS P WP -25mm -25mm -25mm -25mm -25mm spherical () spherical () with spindle lock with spindle lock Graduation.1mm D7
20 NON ROTTING SPINDE MICROMETER HED Ø Ø16.5± W (21) 67 (92) Graduation.1mm Non rotating spindle W -25mm Stem Spindle tip RGE MICROMETER HED 688-5W M12X.5 Ø Ø21 Ø Ø21 Ø (8) 92 (142) (8) 92 (142) W Stem Spindle tip W -5mm -5mm 5µm 5µm Graduation.1mm D8
21 QUICK SPINDE FEEDING MICROMETER HED W W 675-5W Ø Ø (19) 6 (75) (21) 69 (94) W Ø Ø29 Ø Ø W () 95.5 (145.5) 675-5W Stem Spindle tip W -15mm W -25mm 675-5W -5mm 5µm Graduation.1mm Quick spindle feed of 1mm/rev. D9
Micrometer The origin of Mitutoyo s trustworthy brand of small tool instruments
Micrometer The origin of Mitutoyo s trustworthy rand of small tool instruments These marks indicate that a product has successfully passed IP65-level testing, which is carried out y the independent German
More informationExternal Micrometers. C-1
External Micrometers www.tesatechnology.com C-1 External Micrometers Precision Measurement Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented
More informationExternal Micrometers. C-1
External Micrometers C-1 E X T E R N A L M I C R O M E T E R S PRECISION MEASUREMENT Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by
More informationBORE GAUGE FOR SMALL HOLES
ORE GUGE FOR SM HOES 86 48 Ø4.5 SR0.5(steel) 6 86 Ø6 anvil(steel) 3.6 5.7 SR0.75(steel) 5.6 7.8 Read the diameter directly, after imputing the size of setting ring. 2852-10 MIN The minimum value tracking
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationE x t e r n a l M i c r o m e t e r s
External Micrometers B-1 Precision Measurement Precision measurement requires the use of micrometers. The first measuring tool of this type was patented by the French inventor Jean Laurent Palmer in 1848
More informationExternal Micrometers. C-1
External Micrometers C-1 E X T E R N A L M I C R O M E T E R S PRECISION MEASUREMENT Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by
More informationDISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Narrow or deep places, which cannot be measured with a normal dial gauge, can be easily and accurately measured. Mitutoyo's proprietary new structure permits smooth pointer operation.
More informationDial Indicators / Group 2
F- DIAL INDICATORS/INCH Dial Indicators / Group Inch Inch ANSI Standard (Stem Diameter /") Total Range Dial Accuracy Graduation Range Order No. Per Rev. Reading -/ Rev. Total Range Features."." F-." --
More informationDial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system
Dial indicators / Dial test indicators / Center instruments Edge finders / Probes / MF measuring fixture system Accuracy of dial indicators according DIN 878 Max. permissible range () errors (µm) 0-0.4
More informationTESA MICROMASTER Electronic Micrometers with Digital Display
TESA MICROMASTER Electronic Micrometers with Digital Display DIN 86 T1 0,001 0.00005 in Metric/Inch conversion 100 : Ø 6,5 > 100 : Ø 8 With patented TESA capa µ system Measuring span of 0 or 25. Large
More informationDial Indicators. Description of Icon
Dial Indicators Description of Icon Icon Description Reverse reading type suitable for depth and step measurement. One revolution type for easy and error-free reading Double scale spacing type, easy-on-the-eyes
More informationInspection Instrument for Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Inspection Instrument for Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability. i-checker SERIES 170 The i-checker is specially designed to calibrate dial
More informationTrimos LABCONCEPT Universal Length Measuring Instrument
426 Trimos LABCONCEPT Universal Length Measuring Instrument The Fowler/Trimos LABCONCEPT Universal Length Measurement System combines the ultimate in accuracy, performance, range and simplicity in an easy
More informationCatalog No. E11003(2) Quick Guide to Precision Measuring Instruments
Catalog No. E113(2) Quick Guide to Precision Measuring Instruments Quick Guide to Precision Measuring Instruments Quick Guide to Precision Measuring Instruments 2 CONTENTS Meaning of Symbols 4 Conformance
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 Lever-Type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More informationMeasuring and Laying-Out Tools, Testing Instruments
Measuring and Laying-Out Tools, Testing Instruments Slide Callipers Micrometer Gauges Thread Measuring Wires Setting Gauges Multi-purpose Measuring Device 1 1.1 1.4 Gauge Blocks Gauges Gauge Ball Sets
More informationInspection Instrument for Dial Indicator Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Inspection Instrument for Dial Indicator Comparison measuring instruments which ensure high quality, high accuracy and reliability. i-checker SERIES 170 The i-checker is specially designed to calibrate
More informationSAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY:
SAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY: PRICING EXTENDED UNTIL SEPTEMBER 30, 2018 Empowering Possibilities Precision is not only defined by degrees of exactness.
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More information2 - Machining Fundamentals Measurement. Manufacturing Processes - 2, IE-352 Ahmed M El-Sherbeeny, PhD Spring-2015
2 - Machining Fundamentals Measurement Manufacturing Processes - 2, IE-352 Ahmed M El-Sherbeeny, PhD Spring-2015 Learning Objectives Measure to 1/64 (.5 mm) with a steel rule Reading an Inch-based Vernier
More informationMetrology is science considering measurement
Metrology is science considering measurement Categories: Scientific deals with organization and development of etalons and their conservation(highest level) Industrial deals with function of measuring
More informationHeight Master Page 343. Check Master Page 347. Calibration Tools Page 352
Calibration Instruments Height Master Page 343 Check Master Page 347 Calibration Tools Page 352 342 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationFAST CHECK THICKNESS GAGE
FAST CHECK THICKNESS GAGE Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRI-STATE INSTRUMENT SERVICE, INC. 3024 Wayne Trace Ft. Wayne, IN 46806 Lynn A. Stroble Phone: 260 456 4545 CALIBRATION Valid To: September
More informationDial removed for clarity
8 7 4 1 18 19 15 1 9 24 21 24 29 17 14 20 21 29 23 22 3 40 22 25 2 44 41 39 2 32 12 33 13 12 31 43 42 ITEM QTY PART NO. DESCRIPTION 1 1 Back 2 1 Front 3 3 Spacer top 4 1 Pendulum hanger 5 1 Clock dial
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital reading. Inductive patented
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators www.tesatechnology.com G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital
More informationWIDELY USED IN MANUFACTURING PLANTS
SINCE 1916 PRECISION MEASURING INSTRUMENTS MODEL 7 IS JAPANS DOMESTICALLY DIAL GAUGE WIDELY USED IN MANUFACTURING PLANTS TOKYO, JAPAN Mission Statement Harmony and Progress The reliable PEACOCK brand is
More informationMeasurement devices. Kalevi Aaltonen, Aalto University
Measurement devices Kalevi Aaltonen, Aalto University Production engineering measurements, measuring uncertainty, measurement accuracy = statistical mathematical methods The pyramid of accuracy Material
More informationW W W. T Y G. C O M. M X
T O O L I N G E Q U I P M E N T S H A R M E N I N G S E R V I C E R E A M E R S D R I L L S E N D M I L L S D R I V E S S P I N D L E R E P A I R S E R V I C E B A L L S C R E W S E R V O S B A N D S A
More informationLAW WOODEN CLOCK 5 SHT 1 OF 9 SHTS. General Assembly 1 NTS FEB Designed by: BRLAW
2 43 31 42 4 32 39 14 29 21 2 21 22 40 23 22 20 18 1 17 1 4 8 7 9 15 20 29 40 ITEM NO. QTY. PART NO. 1 1 back 2 1 front 4 1 Pendulum hanger 4 Dial spacer 7 1 Pendulum head 8 1 Pendulum pivot 9 1 Pendulum
More informationSAVE 10% INDICATOR PROMOTION INDICATOR PROMOTION. Dial Test, Dial, Digimatic. Effective July 1, 2016 through August 31, 2016
SAVE 10% INDICATOR PROMOTION Dial Test, Dial, Digimatic Effective July 1, 2016 through August 31, 2016 INDICATOR PROMOTION INDICATOR PROMOTION Effective July 1, 2016 through August 31, 2016 SAVE 10% Quick-Set
More informationBlack Granite Surface Plates
Black Granite Surface Plates Surface Plates SURFACE ACCURACY GGG-P-463c. Harder then steel. Retains accuracy for years. Guaranteed repeat reading. unilateral accuracy of plate. Does not rust or corrode.
More informationHow to use a Micrometer
1 Introduction How to use a Micrometer By Marc Yarnall ENGL 202C A micrometer is a measuring device that uses a calibrated screw to measure small distances with high precision. All micrometers can measure
More informationMEASURING INSTRUMENTS
2015 2016 MEASURING INSTRUMENTS CATALOG NO. 301 QUALIT Y INNOVATION SERVICE VALUE Our goal at INSIZE is to provide you, our customer, with quality innovative products at a reasonable price. INSIZE will
More informationSAVE 10% INDICATOR PROMOTION INDICATOR PROMOTION. Dial Test, Dial, Digimatic. Effective July 1, 2016 through August 31, 2016
SAVE 10% Dial Test, Dial, Digimatic Effective July 1, 2016 through August 31, 2016 Effective July 1, 2016 through August 31, 2016 SAVE 10% Quick-Set Test Indicators The most direct gear train design ever
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 A.A. JANSSON Inc. 2070 Airport Road Waterford, MI 48327-1204 Justin Frazzini Phone: 248 674 4811 CALIBRATION Valid To: August 31, 2016
More informationTotal station LEICA TPS
Total station LEICA TPS405 200 The perfect solution for all sites Rugged, adaptable total station with accurate angle measurements, dual-axis compensator, powerful EDM, data output in any format, and application
More informationDEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK. Sub Code/Name: ME 1304/Engineering Metrology & Measurements Year/Sem :III/ V UNIT-I
DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code/Name: ME 1304/Engineering Metrology & Measurements Year/Sem :III/ V UNIT-I CONCEPT OF MEASUREMENT Part- A (2 Marks) 1. Differentiate between
More informationPhysical Measurements
PC1141 Physics I Physical Measurements 1 Objectives Demonstrate the specific knowledge gained by repeated physical measurements for the mass, length, inner and outer diameters of a hollow cylinder. Apply
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationEngineering Metrology and Instrumentation
3 types Mechanical Cleaning Physically disturb contaminants Electrolytic Cleaning Abrasive bubbles aid in contaminant removal Chemical Cleaning Solution Saponification Emulsification Dispersion Aggregation
More informationSensor Accessories. Rotary Motion Accessory Pack. Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp
Sensor Accessories Rotary Motion Accessory Pack (Product No 3288) Pendulum Rod with two masses, Angular Momentum disc set and Linear Rack with mini c-clamp DATA HARVEST Data Harvest Group Ltd 1 Eden Court,
More informationABSOLUTE Digimatic Indicator Page 234. Dial Indicator Page 248. Accessories for Indicator Page 266. Dial Test Indicator Page 275
Indicators BSOLUTE Digimatic Indicator Page 234 Dial Indicator Page 248 ccessories for Indicator Page 266 Dial Test Indicator Page 275 ccessories for Dial Test Indicators Page 286 Thickness Gauge, Caliper
More informationAir distribution systems. Adjustable radial outlet RA-V...
Air distribution systems Adjustable radial outlet RA-V... DS E 0.2013 Construction design Preliminary remarks KRANTZ KOMPONENTEN has developed its wellknown, successful radial outlet into an adjustable
More informationUSS ProCoil Company. WELCOME To Micrometer Training. Introduction and Lecture Phase I 6/18/2010
1 WELCOME To Micrometer Training Introduction and Lecture Phase I 2 Primary Instructor Charles J. Barger Secondary Instructor Fred Davis Today's training will be conducted in a four hour block of instruction,
More informationPa 200 100 50 100-80 125-100 160-125 200-160 250-200 315-250 400-315 500-400 630-500 p t drop Pressure 10 5 800-630 1000-800 1250-1000 1 0,5 20 50 100 500 1000 5000 l/s 100 500 1000 5000 10000 m 3 /h Volume
More informationUnit III Introduction sine bar Sine bar Working principle of sine bar
Unit III Introduction Angular measurement is an important element in measuring. It involves the measurement of angles of tapers and similar surfaces. In angular measurements, two types of angle measuring
More informationNumerical Index. Index-620
Numerical Index Series No. Description Page 0-199 011 Battery 612 011 CMM Software 561 011 Digimatic Data Logger -1000/1000 M 32 011 DIGIMATIC Extension cable 22 011 DMX-1 28 011 DMX-16 / DMX-16 C 30 011
More informationMetal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
More information3D Drawing - CARIF 260 BSA
D Drawing - CARIF 0 BSA DRAWING CODE DRAWING NAME NUMBER ASS000 Basement ASS00 Vice Base ASS00 Vice A ASS00B Vice B ASS00 Frame A ASS00B Frame B ASS000 Frame Cylinder A ASS000B Frame Cylinder B ASS000
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationMECHANICS LAB AM 317 EXP 4 TORSION OF CIRCULAR RODS
MECHANICS LAB AM 317 EXP 4 TORSION OF CIRCULAR RODS I. OBJECTIVES I.1 To become familiar with torsion tests of rods with solid circular cross sections. I.2 To observe the relation between shear stress
More informationNumerical Index. Index -654
Numerical Index 0-199 011 Battery 646 011 Cold-light Illuminator 449 011 Digimatic Data Logger -1000/1000 M 32 011 DIGIMATIC Extension cable 22 011 DMX-1 28 011 DMX-16 / DMX-16 C 30 011 DMX-2 28, 29 011
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationAir distribution systems. Radial outlet RA-N2...
Air distribution systems Radial outlet RA-N... DS E 0.01 Radial outlet RA-N Preliminary remark KRANTZ KOMPONENTEN radial outlets RA-N have fixed radial vanes and are available with circular or square face.
More informationPart No. Part Name Spec.
NPR50A_pl160513 NP50A / NR50A (*Include ) 2016/5/13 Title Part Part Name Spec. 1 1 1.BASE W083 HEX SOCKET HEAD CAP SCREW M8 25 2 Y Y Y: YES 1 2 1.BASE PM62 REAR GRIP 1 N N N: NO 1 3 1.BASE W051 HEX SOCKET
More information1 Measure various dimensions of component using Vernier caliper and dial type vernier caliper. d 3 d 1
1 Measure various dimensions of component using Vernier caliper and dial type vernier caliper. 1. Note down the apparatus needed and draw component drawing and label parameters to measure. Vernier Caliper
More informationSIR C.R.REDDY COLLEGE OF ENGINEERING ELURU
SIR C.R.REDDY COLLEGE OF ENGINEERING ELURU-534007 METROLOGY LABORATORY MANUAL III/IV B.TECH (Mechanical): II SEMESTER DEPARTMENT OF MECHANICAL ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING METROLOGY
More informationCourse: Technology II Training course topic: Metrology
Department of machining, process planning and metrology ver.2017-01 Following problems and tasks will be solved during the first two weeks of the training courses of Technology II. Detailed information
More informationZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
More informationABSOLUTE Digimatic Indicator Page 249. Dial Indicator Page 263. Accessories for Indicator Page 281. Dial Test Indicator Page 290
Indicators BSOLUTE Digimatic Indicator Page 249 Dial Indicator Page 263 ccessories for Indicator Page 281 Dial Test Indicator Page 290 ccessories for Dial Test Indicators Page 298 Thickness Gauge, Depth
More informationLAW WOODEN CLOCK 1 GENERAL ASSEMBLY SHT 1 OF 10 SHTS. Designed by: BRLAW
Woodenclocks Clock1 The drawings on the following pages contain plans to build the wooden clock shown above. For further information and more detailed rendered images visit SHT 1 OF 10 SHTS GENERAL ASSEMBLY
More informationMATERIAL SEE BOM ANGLES = 2 > 2000 DATE MEDIUM FINISH
NOTS:. LN MTN SUR WT NTUR/SOPROPYL LOOL PROR TO RN L OR LOO. PPLY LOTT 4 ON TRS. TORQU TO. Nm / 00 lb-in 4. TORQU TO 45-50 Nm / - lb-ft 5. TORQU TO Nm / 4.5 lb-ft. TORQU TO 0 Nm / lb-in. TORQU TO 5.5 Nm
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 FRANK COX METROLOGY (Formerly CANADIAN CENTRAL GAUGE LABORATORY) 40 West Drive Brampton, Ontario, Canada L6T 3T6 Hilliard Cox Phone: 905 457 9190 CALIBRATION
More informationMetal core drills the most cost-effective drilling experience.
Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core
More informationInstruction for use Plunger Probes M FB and M78-Plus
Instruction for use Plunger Probes M5678-78FB and M78-Plus Rev 3 (10/2012) DIATEST Plunger Probe M5678-68FB Self-centering interior measuring gauge for bore diameter from 19,5 to 330 mm Design A plunger
More informationCatalog No. A5105 PRECISION MEASURING INSTRUMENTS. Technology. Customizing. Quality ,000U
R Catalog No. A PRECISION MEASURING INSTRUMENTS Technology Customizing Quality 011.08. 3,000U President's voice We, Ozaki Mfg. Co., Ltd has established in 1916 and came along with Japanese Automotive industry
More informationMR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
More informationUNIVERSAL SIGNAL INTERFACE UNIT
SGI- rev. A UNIVERSAL SIGNAL INTERFACE UNIT This unit can recalibrate a speedometer signal or convert a speed signal from one type to another type. The different functions it can perform are as follows:.
More informationEXPERIMENT NO.5 Measurement of Screw Thread using Floating Carriage Micrometer
EXPERIMENT NO.5 Measurement of Screw Thread using AIM:To measure the Major, Minor and Effective diameter of external parallel screw threads using. APPARATUS: EDMM-100CL, Prism (A to D), Wire (1 to 4mm),
More information5900 Elite Comfort Recliner Parts List 2
Page of 8 PRTS LIST Number Part Number 400530 STER, NYLON 3" TOTL LOK, (NO LONGER VILLE) 3 400540 STER, NYLON 3" DIRET. LOK, (NO LONGER VILLE) 566400 OLT-RRIGE ZIN /4-0 X /4 4 56604 NUT-/4-0 HEX NYLON
More informationPRODUCT CATALOG
www.engman-taylor.com 0 PRODUCT CATALOG OUR COMMITMENT TO YOU... 00% MADE PREMIUM INDUSTRIAL QUALITY PRODUCTS % ORDER FULFILLMENT SAME DAY SHIPPING NO MINIMUM ORDER REQUIREMENTS EXCEPTIONAL QUALITY CONTROL
More informationJTC TOOL. 6Bore Gauge & Micro Hole Test. Dial Indicator (Option)
Holder ore Gauge & Micro Hole Test Interchangeable Rod nvil Nut Dial Indicator (Option) Holder Clamp Screw Grip Joint Guide Contact Point This is designed for measuring diameter of small holes exclusively
More information1 11 A3. Designed by: Brian law All dimensions in mm and (inchs) 3rd Angle projection. Not to Scale Unless otherwise stated
B 2 11 12 37 17 6 2 44 36 43 1 20 3 35 7 18 22 18 16 30 3 6 5 2 18 41 19 26 25 27 42 17 SECTION B-B SCALE 1 : 2 24 21 31 29 1 23 4 9 14 10 11 33 15 37 40 38 32 39 45 28 ITEM NO. PART NUMBER DESCRIPTION
More informationMetrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere. Lecture 26 Measurement of Gear Elements
Metrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere Lecture 26 Measurement of Gear Elements (Refer Slide Time: 00:19) (Refer Slide Time: 00:28) I welcome
More informationThe Program. Wear measurement Page 5. Inspection of parts Page 6. Online certificate Page 7. DKD-calibration Page 8. Deviation analysis Page 11
The Program Wear measurement Page 5 Inspection of parts Page 6 Online certificate Page 7 DKD-calibration Page 8 u PM -certificate Page 10 Deviation analysis Page 11 Quality manager Thomas Peter 09187/
More informationINDEX. Dial Indicators F-14 Dial Indicators F-15 Dial Indicators F-16 18
Digimatic Indicator INDEX ABSOLUTE Digimatic Indicator ID-S F-2 ABSOLUTE Digimatic Indicator ID-U F-3 ABSOLUTE Digimatic Indicator ID-C F-4 9 ABSOLUTE Digimatic Indicator ID-H F-10 ABSOLUTE Digimatic Indicator
More informationSwirl Diffuser. Type SDW T 2.2/1/B/1. recommended for room heights from approx m
T 2.2/1/B/1 Swirl Diffuser Type SDW recommended for room heights from approx. 2.60... 4.00 m TROX UK Ltd Caxton Way Thetford Norfolk IP24 3SQ Telephone +44(0) 1842 54545 Telefax +44(0) 1842 63051 e-mail
More informationa a a a. S-2 Turbine Rev
30-4037-1a 30-4037-0a 30-4038-1a 30-4038-0a S-2 Turbine 6-8-6 Rev. 01-24-01 6-8-6 Turbine Steam Engine Engine Parts 1.) Stanchion ( black ) FB-1200024 0.25 2.) Handrail ( nickel ) FB-12040 2.00 ( 20.0x207.0mm
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. GREENSLADE & CO., INC Wenneca Avenue Fort Worth, TX Larry Borowski Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GREENSLADE & CO., INC. 2234 Wenneca Avenue Fort Worth, TX 76102 Larry Borowski Phone: 800 435 2657 CALIBRATION Valid To: October 31, 2018 Certificate Number:
More informationLINEAR AND ANGULAR MEASUREMENTS
UNIT II LINEAR AND ANGULAR MEASUREMENTS UNIT-II 2. 1 CONTENTS 2.1 LINEAR MEASURING INSTRUMENTS 2.1.1 SCALES 2.1.2 CALIPERS 2.1.3 VERNIER CALIPERS 2.1.4 MICROMETERS 2.1.5 SLIP GAUGES 2.2 INTERFEROMETERS
More informationEdition 3 September Air Angle Wrench and Nut Runner. QA6 and QA8 Series. Parts Information. Save These Instructions
660072 Edition 3 September 2007 Air Angle Wrench and Nut Runner QA6 and QA8 Series Parts Information Save These Instructions Module Exploded Diagram 7 5 9 7 2 9 50 3 8 3 38 39 8 9 20 2 33 22 23 3 2 3 37
More informationTechnical Instructions 4003.B. Specification 12 ½''' Dimensions and battery. Performances. Functions. Movement height 4.40 mm
Specification 12 ½''' Dimensions and battery ø Total 28.60 mm ø Case fitting 28.00 mm Movement height 4.40 mm Movement rest 0.60 mm Height of stem 1.90 mm Stem: Thread / Distance 0.90 mm / 0.90 mm Battery
More informationVariable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
More informationLoad Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
More informationMounting kits for insulation of power transistors
ounting kits for insulation of power transistors tel. 0..6.6.6 www.elitaliaweb.it fax 0.6.6.0.09 info@elitaliaweb.it ST STS ST 0 STS 0 for transistor TO TO TO 0 TO 0 version with mica wafer S with silicone
More informationBRIGHT-STRATO SERIES
Coordinate Measuring Machines BRIGHT-STRATO SERIES CNC Coordinate Measuring Machine Bulletin No. 1855 Moving-bridge type CMM with excellent measuring accuracy. Its measuring envelope is suitable for medium-to-large
More informationKrantz Components. Twist outlet DD-N... for ceiling installation. Air distribution systems
Krantz Components Twist outlet DD-N... for ceiling installation Air distribution systems DS E 0. Twist outlet Preliminary remarks and construction design Preliminary remarks Twist outlets for ceiling installation
More informationMODEL NAME : LLDMWW0-15K*0*A
Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for
More information55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
More informationSUBMINIATURE MICROSWITCHES - STANDARD
0/08 SUBMINIATURE MICROSWITCHES - STANDARD VD - 87 Flexible leaf snap-action mechanism with wiping contacts Ratings from 0.0 A Vc to (6) A 0 Va and / hp -0 Va ENEC and curus approved up to +0 C Housing
More informationM2 V0 IN ON A POLE. Material Aluminium Polycarbonate. Finish White Transparent TECHNICAL CHARACTERISTICS
71-5156-14-M2V0 ON A POLE Finish White Transparent IP20 Material Aluminium Polycarbonate 40º 50 TECHNICAL CHARACTERISTICS Light source Light source: LED Output (W): max. 13W Color temperature: Warm White
More informationDigimatic Indicators. Dial Indicators. Dial Test Indicators. Dial Indicator Applications and Stands
Small Tool Instruments and Data Management ID-H Digimatic Indicators Dial Indicators Dial Test Indicators Dial Indicator pplications and Stands ID-C 2046S INDEX Digimatic Indicators BSOLUTE Digimatic Indicator
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FRANK COX METROLOGY (Formerly CANADIAN CENTRAL GAUGE LABORATORY) 40 West Drive Brampton, Ontario, Canada L6T 3T6 Hilliard Cox Phone: 905 457 9190 CALIBRATION
More informationLinear measuring technology
Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability
More informationJTC TOOL. 1Dial Gauge
1ial Gauge ial Indicator is surely utilized at manufacturing sites where dimensional high accuracy is needed to be confirmed. The graduation (1- graduation ) depends on usage and Teclock offers kinds of
More informationTR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF DIMENSIONAL METROLOGY
CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF DIMENSIONAL METROLOGY Approved By: Chief Executive Officer: Ron Josias Executive: Accreditation: Mpho Phaloane Revised By: Specialist Technical Committee
More information