# LOBE (TX) GO PRODUCTION GAGES TMF/TXq-804
|
|
- Eleanore Waters
- 6 years ago
- Views:
Transcription
1 # LOBE (TX) PENETRATION GAGES TMF/TXq9 INTERNAL RECESS S STANDARD REFERENCES TMF/TXq When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With Digital Indicators Note: TamperProof Style Available (Sizes # Thru #5) # LOBE (TX) GO PRODUCTION GAGES TMF/TXq INTERNAL RECESS S STANDARD REFERENCES TMF/TXq When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With Digital Indicators Note: TamperProof Style Available (Sizes # Thru #5)
2 #5 LOBE (TX) INTERNAL FINAL GAGES TMF/TXq INTERNAL RECESS S STANDARD REFERENCES TMF/TXq Universal s Gage Probes are heat treated, thermally stabilized, and surface treated. This provides additional hardness for maximum wear. Gage probes are calibrated to dimensions and tolerances as specified and are traceable to the National Institute of Standards and Technology. #9 HEXALOBULAR GO PENETRATION GAGES IFI5 & ISO INTERNAL RECESS S REFERECE STANDARDS STANDARD REFERENCES IFI 5 & ISO When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With Digital Indicators Note: TamperProof Style Available (Sizes # Thru #5) 5
3 #95 SCREW SLOT PENETRATION GAGE FOR SLOTTED HEAD SCREWS 95 DESCRIPTION SCREW SLOT PENETRATION GAUGE PROBE WIDTH. /,mm PROBE DEPTH UP TO 7/ / mm Universal s Screw Slot Penetration Gage Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators. #9 TOTAL RECESS DEPTH GAGE FOR ALL CROSS RECESS HEAD SCREWS RECESS Universal s Total Recess Depth Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators.
4 #9 TYPE I PENETRATION GAGES FOR TYPE I CROSS RECESS HEAD SCREWS RECESS Universal s Type Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPC Compatible With Digital Indicators. #9 TYPE IA PENETRATION GAGES FOR TYPE IA CROSS RECESS HEAD SCREWS RECESS Universal s Type A Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPC Compatible With Digital Indicators.
5 #95 HEXAGON PENETRATION GAGES FOR SOCkET CAP, SHOULDER AND SET SCREWS HEX.5.5 / 5/ / 7/ / 9/ 5/ / 7/ / 5/ / 7/ / 9/ 5/ / 7/ When Ordering Specify: Inch Or Metric Dial Indicator SPCCompatible With Digital Indicators Note: TamperProof Style Available Specify When Ordering. #9 METRIC HEXAGON PENETRATION GAGES FOR SOCkET CAP, SHOULDER AND SET SCREWS HEX ISO7 (DIN9) JIS7 ISO7 (DIN799) JIS9 ISO / (DIN 9/9) JIS mm.9mm.mm M. M./M./M. M M mm mm.5mm M./M M.5 M M M M M M mm mm 5mm M M5 M M M mm mm mm M M M M M M/ M/ M/M mm mm mm M /M M/M M/M M/M mm 9mm mm mm M/M M/M7 M M When Ordering Specify: Inch Or Metric Dial Indicator SPCCompatible With Digital Indicators Note: TamperProof Style Available Specify When Ordering.
6 #9 WRENCHING HEIGHT GAGES FOR HEXAGON WASHER HEAD SCREWS SCREW HEX # / # # / #5 # / #7 / # # / # / 5/ / 7/ / / / / 5/ / / 9/ 5/ / Universal s Wrenching Height Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPC Compatible With Digital Indicators. #9 WRENCHING HEIGHT GAGES FOR HEXAGON WASHER HEAD SCREWS SCREW HEX MX, M,5X,5 MX,5 M,5X, MX,7 M5X, X MX,5 MX,5 MX,75.mm.mm 5.mm 5.5mm 7.mm.mm mm mm 5mm mm Universal s Wrenching Height Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators.
7 #95 OFFSET CRUCIFORM PENETRATION GAGES FOR OFFSET CRUCIFORM RECESS HEAD SCREWS NASM7B AND NASM9 STANDARDS ACR NASM 9 95* 95* 95* 955* 95* RECESS 5 / 5/ / 7/ / 9/ 5/ / Universal s Offset Cruciform Penetration Gage Probes Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gauges Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators. #95 SQUARE PENETRATION GAGES FOR SqUARE RECESS HEAD SCREWS ROBERTSON SqUARE STANDARDS Universal s Square Drive Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators.
8 #95 TWELVEPOINT PENETRATION GAGES FOR INTERNAL POINT RECESS HEAD SCREWS EUROPEAN AUTOMOTIVE STANDARDS M M5 M M M M Universal s Point Penetration Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. When Ordering Specify: Inch or Metric Dial Indicator; SPCCompatible With Digital Indicators. #95 TWELVEPOINT GONOGO GAGES FOR INTERNAL POINT RECESS HEAD SCREWS EUROPEAN AUTOMOTIVE STANDARDS M M5 M M M M Universal s Point GoNoGo Gages Are Heat Treated, Thermally Stabilized, And Surface Treated To Provide Additional Wear To Maximize Gage Life. All Gages Are Calibrated To Dimensions And Tolerances As Specified And Are Traceable To (NIST) National Institute Of Standards And Technology. 5
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. GREENSLADE & CO., INC Wenneca Avenue Fort Worth, TX Larry Borowski Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GREENSLADE & CO., INC. 2234 Wenneca Avenue Fort Worth, TX 76102 Larry Borowski Phone: 800 435 2657 CALIBRATION Valid To: October 31, 2018 Certificate Number:
More informationENGINEERING DRAWINGS MENG 102 CLASSWORK SHEETS
ENGINEERING DRAWINGS MENG 2 CLASSWORK SHEETS Department of Mechanical Engineering Faculty of Engineering King Abdulaziz University Jeddah, Kingdom of Saudi Arabia FALL 3 K.A.U MENG2 Mechanical Engineering
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ALPHAGAGE th Avenue Rockford, IL James Hoard Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALPHAGAGE 5245 27 th Avenue Rockford, IL 61109 James Hoard Phone: 815 391 6400 CALIBRATION Valid To: August 31, 2018 Certificate Number:
More informationMAHR UK PLC I GAUGING TIP GAUGING TIP: DIN OR AGD WHAT'S RIGHT FOR ME?
MAHR UK PLC I GAUGING TIP GAUGING TIP: DIN OR AGD WHAT'S RIGHT FOR ME? Gauging Tip Calibration: 2 Introduction A longtime friend of mine from Russia once told me that eventually the US/UK would be metric
More informationDial Indicators / Group 2
F- DIAL INDICATORS/INCH Dial Indicators / Group Inch Inch ANSI Standard (Stem Diameter /") Total Range Dial Accuracy Graduation Range Order No. Per Rev. Reading -/ Rev. Total Range Features."." F-." --
More information台灣黑馬牌校正器類 CALIBRATOR METROLOGY
G1 G2 G3 Multi-functional Length Calibrator Calibration Function: All kind of caliper, micrometer, height gauge, dial indicator, bore gauge, and other measuring application. Model No. Calibration Range
More informationINDIANA DEPARTMENT OF TRANSPORTATION OFFICE OF MATERIALS MANAGEMENT. VERIFYING THERMOMETERS ITM No T
1.0 SCOPE. INDIANA DEPARTMENT OF TRANSPORTATION OFFICE OF MATERIALS MANAGEMENT VERIFYING THERMOMETERS ITM No. 909-08T 1.1 This test method covers the procedure for a verification of scale accuracy of liquid-in-glass
More information8001 E. BLOOMINGTON FREEWAY BLOOMINGTON, MN Service:
simco e l e c t r o n i c s 806 CITY CENTER BOULEVARD NEWPORT NEWS, VA 23606 CERTIFICATE OF CALIBRATION FOR GN RESOUND-FIELD SERVICE KITS 8001 E. BLOOMINGTON FREEWAY BLOOMINGTON, MN 55420 Certificate No.
More informationSAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY:
SAVE UP TO 30% 2016 PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY DISTRIBUTED BY: PRICING EXTENDED UNTIL SEPTEMBER 30, 2018 Empowering Possibilities Precision is not only defined by degrees of exactness.
More informationWenzhou Tripod Instrument Manufacturing Co., Ltd.
Wenzhou Tripod Instrument Manufacturing Co., Ltd. Website: http://aliyiqi.en.alibaba.com http://www.wzydyq.com/english/ Phone: 86-577-57572515 57572515 Fax: 86-577-57572516 57572516 E-mail: aliyiqi@gmail.com
More informationSTEEL. General Information
General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate
More informationMarCator ANSI/AGD Dial Indicators
- 5-2 MarCator ANSI/AGD Dial Indicators OVERVIEW Dial Indicators Selection Guide Order number Range Total Dial Style Dial Style w/o Rev with Rev Grad per Rev. Range w/o Rev with Rev Counter Counter Group
More informationInstruction for use Plunger Probes M FB and M78-Plus
Instruction for use Plunger Probes M5678-78FB and M78-Plus Rev 3 (10/2012) DIATEST Plunger Probe M5678-68FB Self-centering interior measuring gauge for bore diameter from 19,5 to 330 mm Design A plunger
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationall stainless steel transducer multimedia compatibility
all stainless steel transducer multimedia compatibility High-Performance Silicon technology LARGE INVENTORY Fast Shipment! 0-0.07 to 0-690 bar 100 mv, 0 to 5 V, and 4 to 20 ma Outputs U 1, 2 & 5 psi Low
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationLevel-Type Dial Indicator
Level-Type Dial Indicator Feature Swiss style precision gear module design, precision display, aluminum or steel housing, ensuring reliability and durability. Produced and calibrated according to German
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationMeasuring methods. Measuring tools. Measuring methods. Measuring tools. Measuring methods. Measuring tools. Measuring methods. 5. Smoothness testing
1. Parallelism testing / Height testing Dial gauge and Dial indicator 2. Fix the measuring tools on the actuator s slider. 2. Absolute straightness accuracy testing Laser interferometer detection 2. Fix
More informationInspection Instrument for Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Inspection Instrument for Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability. i-checker SERIES 170 The i-checker is specially designed to calibrate dial
More informationHeight Master Page 343. Check Master Page 347. Calibration Tools Page 352
Calibration Instruments Height Master Page 343 Check Master Page 347 Calibration Tools Page 352 342 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationThe Program. Wear measurement Page 5. Inspection of parts Page 6. Online certificate Page 7. DKD-calibration Page 8. Deviation analysis Page 11
The Program Wear measurement Page 5 Inspection of parts Page 6 Online certificate Page 7 DKD-calibration Page 8 u PM -certificate Page 10 Deviation analysis Page 11 Quality manager Thomas Peter 09187/
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALABAMA SCALE & INSTRUMENT MARSHALL, INC. d.b.a. ASI Calibration Labs - Texas 1006 East End Blvd North Marshall, TX 75672 Lawson Hill
More informationInspection Instrument for Dial Indicator Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Inspection Instrument for Dial Indicator Comparison measuring instruments which ensure high quality, high accuracy and reliability. i-checker SERIES 170 The i-checker is specially designed to calibrate
More information2 - Machining Fundamentals Measurement. Manufacturing Processes - 2, IE-352 Ahmed M El-Sherbeeny, PhD Spring-2015
2 - Machining Fundamentals Measurement Manufacturing Processes - 2, IE-352 Ahmed M El-Sherbeeny, PhD Spring-2015 Learning Objectives Measure to 1/64 (.5 mm) with a steel rule Reading an Inch-based Vernier
More informationMADILL MBT GRAPPLE RETURN TO INDEX
MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions
More informationCLIPPER SCREEN SIZES - DECEMBER 28, 2005
PERFORATED METAL ROUND HOLE FRACTIONS HOLE SIZE HOLE SIZE IN HOLE SIZE TOLERANCE STANDARD OR ( INCH ) IN 64TH THOUSANDS IN MM THOUSAND ADD ON PRICE 1/25 2.56.040 1.01 + 0 -.003 STANDARD 1/24 2.67.041 1.05
More informationDirect Operated Type Solenoid Operated Proportional Directional Control Valve
Direct Operated Type Solenoid Operated Proportional Directional Control Valve Features These four-way proportional directional control valves enable control of the forward and reverse motion of an actuator.
More informationRead the following BEFORE getting started:
BASIC MEASUREMENTS Read the following BEFORE getting started: Ruler: A ruler, or rule, is an instrument used in geometry, technical drawing and engineering/ building to measure distances and/or to rule
More informationx Builders Level Service Manual
40-690 22x Builders Level Service Manual Item Description Pages.0 Overall Instrument Assembly 2. Main Assembly 2.2 Telescope Assembly 3.3 Base Assembly 4.4 Frame Assembly 5 2.0 Calibration 6-8 2. Vial
More informationMeasurement Systems Analysis
Measurement Systems Analysis Since measurement systems represent a subprocess within a process They are subject to Variation. What could be the source of this variation? Why do Measurements Vary? Possible
More informationAvailable online at ScienceDirect. Andrej Godina*, Bojan Acko
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 69 ( 014 ) 191 198 4th DAAAM International Symposium on Intelligent Manufacturing and Automation, 013 Measurement Uncertainty
More informationManually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting.
Manually Operated Directional s DM- / / DMG- / / / / hread Connection / Mounting Specifications hreaded Connections Numbers DM--C - DM--D - DM--D - DM--B - DM- -C - DM- -D - DM- -D - ( ) (.) (.) (.) (.)
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More informationproduct manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
More informationSGF. The metric thread forming connection
SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,
More informationFAST CHECK THICKNESS GAGE
FAST CHECK THICKNESS GAGE Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous
More informationZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
More informationUSS ProCoil Company. WELCOME To Micrometer Training. Introduction and Lecture Phase I 6/18/2010
1 WELCOME To Micrometer Training Introduction and Lecture Phase I 2 Primary Instructor Charles J. Barger Secondary Instructor Fred Davis Today's training will be conducted in a four hour block of instruction,
More informationCTV series CHARACTERISTICS LINEAR UNITS
CTV series CHARACTERISTICS The CTV series describes s with a precision ball screw drive and two parallel, integrated, Zerobacklash rail guides. Compact dimensions allow high performance features such as,
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 QUALITY PLUS, INC. 170 Grove Street Chicopee, MA 01020 Mark J. Vickers Phone: 413 594 5529 CALIBRATION Valid
More informationBushing Part No. XTB15 XTB20 XTB25 XTB30 XTB35 XTB40 XTB45 XTB50. Wt lbs XTB60 XTB XTB80 XTB
T s STOCK T BUSHINGS Part No. Stock Bores Keyseat Key Supplied TB / *, / *, / * *, /*, /*, *, /*, /* / / / / / / x / x / TB0, /, /, /, /*, * / / / x / / / / / x / x / TB, /, /,/, /, / /,, / /* / x / /
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationHigh Accuracy High Speed in Your Process
DX-Series Handheld Precision IR Thermometers EXERGEN C O R P O R A T I O N The Only Certified Accurate NIST Traceable Infrared Temperature Instruments in the World* High Accuracy High Speed in Your Process
More informationRefer to page E-6 for details. Refer to page E-31 for details. Digital Height Master. Refer to page E-35 for details. High Precision Square
NewProducts Ultra Low xpansion Ceramic Gauge (ZRO CRA Block) Refer to page -6 for details. Gauge Block Comparator GBCD-00A Refer to page -3 for details. Digital Height Master Refer to page -35 for details.
More informationACCREDITED CALIBRATION AND MEASUREMENT CAPABILITY SCOPE. Ring gaugeф(50~100)mm U=1.1 μm
Name: Shanghai Institute of Quality Inspection and Technical Research Address: No.627, Yongjia Road, Shanghai, China Registration Accreditation Criteria: ISO/IEC 17025 and relevant requirements of CNAS
More informationMeasurement devices. Kalevi Aaltonen, Aalto University
Measurement devices Kalevi Aaltonen, Aalto University Production engineering measurements, measuring uncertainty, measurement accuracy = statistical mathematical methods The pyramid of accuracy Material
More informationDS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL Lasheila Hayes Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL 35096 Lasheila Hayes Phone: 205 505 0296 CALIBRATION Valid to: April 30, 2019 Certificate Number:
More informationDISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS
FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series
More informationOperating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2
Operating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2 P/N VALTOL-KT2 Revision 2.0 October 7, 2014 Prepared by: Quality Lab Accessories, LLC 100 Emlen Way, Suite 108 Telford,
More informationBlack Granite Surface Plates
Black Granite Surface Plates Surface Plates SURFACE ACCURACY GGG-P-463c. Harder then steel. Retains accuracy for years. Guaranteed repeat reading. unilateral accuracy of plate. Does not rust or corrode.
More informationPrecision Tools & Instruments. Product Fundamentals. Bulletin No An essentials guide of Mitutoyo precision tools and instruments
Precision Tools & Instruments Product Fundamentals Bulletin No. 2119 An essentials guide of Mitutoyo precision tools and instruments Mitutoyo Fundamentals of Micrometers Outside micrometers are industry
More informationPC User s manual. Advanced Electronic/Air Column PC BOWERS METROLOGY page 1 /32 version E
User s manual Advanced Electronic/Air Column PC-2200 BOWERS METROLOGY page 1 /32 version 2.06 -E BOWERS METROLOGY page 2 /32 version 2.06 -E CONTENTS 1. INTRODUCTION 4 1.1 GENERAL INFORMATIONS 4 1.2 TECHNICAL
More informationMeasuring and Laying-Out Tools, Testing Instruments
Measuring and Laying-Out Tools, Testing Instruments Slide Callipers Micrometer Gauges Thread Measuring Wires Setting Gauges Multi-purpose Measuring Device 1 1.1 1.4 Gauge Blocks Gauges Gauge Ball Sets
More informationRST INSTRUMENTS LTD.
RST INSTRUMENTS LTD. RST Tape Extensometer Instruction Manual Copyright Ltd. All Rights Reserved. Ltd. Kingston St., Maple Ridge, B.C. Canada VX Z Tel: () - Fax: () - Email: info@rstinstruments.com Website:
More informationVishay Dale - Milwaukee Resistor EN Series - Dynamic Braking Resistors and Load Banks
MODEL ENCLOSURE TYPE ENCLOSURE SIZE EN Series - Dynamic Braking Resistors and Load Banks EN20A4B2K004R00N00 EN20-A1-RB 2K00 4R00 N 0 EN23B4B8K004R00Y10 EN23-B4-RB-1 8K00 4R00 Y 1 RESISTOR TYPE SIZE ( watt
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators www.tesatechnology.com G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital
More informationLever-type Dial Test Indicators
Lever-type Dial Test Indicators G-1 Lever-type Dial Test Indicators TESA IP65 Electronic Dial Test Indicators Provides the advantages of a mechanical test indicator with a digital reading. Inductive patented
More informationE x t e r n a l M i c r o m e t e r s
External Micrometers B-1 Precision Measurement Precision measurement requires the use of micrometers. The first measuring tool of this type was patented by the French inventor Jean Laurent Palmer in 1848
More informationDS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
More informationVishay Dale - Milwaukee Resistor EN Series - Dynamic Braking Resistors and Load Banks
MODEL ENCLOSURE TYPE ENCLOSURE SIZE Vishay Dale - Milwaukee Resistor EN Series - Dynamic Braking Resistors and Load Banks EN20A4B2K004R00N00 EN20-A1-RB 2K00 4R00 N 0 EN23B4B8K004R00Y10 EN23-B4-RB-1 8K00
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 A.A. JANSSON Inc. 2070 Airport Road Waterford, MI 48327-1204 Justin Frazzini Phone: 248 674 4811 CALIBRATION Valid To: August 31, 2016
More informationEXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN AND THEN THERE WAS PRECIMAR
- EXACTNESS IN THE NANOMETER RANGE USED TO BE A UTOPIAN IDEAL AND THEN THERE WAS PRECIMAR The Precimar product family specializes in high-precision dimensional metrology for absolute and relative measurements.
More informationTemperature and Dimensional Measurements Jim Salsbury, Ph.D., Corporate Metrology Mitutoyo America Corporation www.mitutoyo.com/on-demand Scroll down to Technical Presentations 2 Mitutoyo America Calibration
More informationChapter 8. Lecture Notes Dr. Rakhmad Arief Siregar Kolej Universiti Kejuruteraan Utara Malaysia
Chapter 8 Screw, Fasteners and the Design of Nonperanent Joint Lecture Notes Dr. Rakhad Arief Siregar Kolej Universiti Kejuruteraan Utara Malaysia Mechanical Engineering Design Sixth Metric Edition J.E.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FRANK COX METROLOGY (Formerly CANADIAN CENTRAL GAUGE LABORATORY) 40 West Drive Brampton, Ontario, Canada L6T 3T6 Hilliard Cox Phone: 905 457 9190 CALIBRATION
More informationOphthalmic Products Specifications
Page : 1/14 Ophthalmic Products Specifications Revision : F October 2013 Corning SAS Rue Saint Laurent CS 10243 Bagneaux sur loing 77797 NEMOURS CEDEX FRANCE 1 Page : 2/14 Revision record: Revision date
More informationCEEN 3320 Behavior & Properties of Engineering Materials Laboratory Experiment No. 1 Measurement Techniques
Laboratory Experiment No. 1 Measurement Techniques Engineers rely on data from a wide variety of sources to design the things that make up our physical world and to ensure compliance with established specifications.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRI-STATE INSTRUMENT SERVICE, INC. 3024 Wayne Trace Ft. Wayne, IN 46806 Lynn A. Stroble Phone: 260 456 4545 CALIBRATION Valid To: September
More informationUncertainty Analysis of Experimental Data and Dimensional Measurements
Uncertainty Analysis of Experimental Data and Dimensional Measurements Introduction The primary objective of this experiment is to introduce analysis of measurement uncertainty and experimental error.
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationGUHROSync Synchro tapping chucks THE BEST OF BOTH SYSTEMS GUHRING - YOUR WORLD-WIDE PARTNER
THE BEST OF BOTH SYSTEMS THE ADVANTAGES OF HYDRAULIC CHUCKS & SYNCHRO TAPPING CHUCKS IN ONE TOOL HOLDER GUHROSync Synchro tapping chucks GUHRING - YOUR WORLD-WIDE PARTNER GUHROSYNC THE EASY WAY TO THE
More informationK04 TYPE -40 C +85 C 20000H
K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 FRANK COX METROLOGY (Formerly CANADIAN CENTRAL GAUGE LABORATORY) 40 West Drive Brampton, Ontario, Canada L6T 3T6 Hilliard Cox Phone: 905 457 9190 CALIBRATION
More informationLesson 25. Static Pile Load Testing, O-cell, and Statnamic. Reference Manual Chapter 18
Lesson 25 Static Pile Load Testing, O-cell, and Statnamic Reference Manual Chapter 18 STATIC LOAD TESTING Most accurate method to determine static pile capacity Perform at design or construction stage
More informationUPDATE. Summary of Specifications
UPDAE oroidal Design Screw Mount Lowest hermal Resistance Optimum Cooling Capability New Lower Profile s New eat Sink Mounting Kit RoS Compliant he series available in low profile sizes offers high capacitance
More informationTisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
More informationCoromant Capto Short Adapter
Coromant Capto Short Adapter The quick change system for reduced setup and production time. Faster return on investment. Short Adapter Short Adapter More available cutting tool length Short toolholder
More information7 Revised AM001 Rev. 01/17
Spare Parts Price Book The Spare Parts Price Book will be used for procuring replacement parts under WMATA s micro purchasing method. While the Spare Parts Price Book is a mandatory submission for your
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationA hybrid Measurement Systems Analysis and Uncertainty of Measurement Approach for Industrial Measurement in the Light Controlled Factory
A hybrid Measurement Systems Analysis and Uncertainty of Measurement Approach for Industrial Measurement in the Light Controlled Factory J E Muelaner, A Francis, M Chappell, P G Maropoulos Laboratory for
More informationNORMACLAMP Hose Clamps
TORRO Worm Drive Hose Clips to DIN 3017 Short description of technical features TORRO hose clips are specially suitable for applications under high mechanical loads. Since we are continuously working to
More informationDigimatic Indicators. Dial Indicators. Dial Test Indicators. Dial Indicator Applications and Stands
Small Tool Instruments and Data Management ID-H Digimatic Indicators Dial Indicators Dial Test Indicators Dial Indicator pplications and Stands ID-C 2046S INDEX Digimatic Indicators BSOLUTE Digimatic Indicator
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
More informationDigimatic Indicators. Dial Indicators. Dial Test Indicators. Dial Indicator Applications and. Stands
F Small Tool Instruments Digimatic Indicators Dial Indicators/ Dial Test Indicators ID-C Calculation Type ID-N / ID-B Digimatic Indicators Dial Indicators Dial Test Indicators Dial Indicator Applications
More informationIntroduction. Earlier. To Scales. We talked about. L Dimensions
1 Introduction To Scales Introduction 2 Earlier We talked about Dimensions T Parts of the dimension object OExtension lines ODimension line OArrowheads ONumeric value T ocation of the numeric value Earlier
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ARCONIC POWER AND PROPULSION RESEARCH CENTER 1500 S. Warner St. Whitehall, MI 49461-1895 Michelle McDonald Phone: 231 894 7586 CALIBRATION
More informationST - DS - Toolholders to the Spindle Centerline - Correction
LAST UPDATED: 11/28/2018 Page 1 of 9 pages Toolholders to the Spindle Centerline - Correction Page 2 of 9 pages This section tells you how to align the toolholders [1] to the spindle centerline [2]. 1
More informationIdentification Number. Accuracy. Clearances. Examples of identification number. Table 3 Radial internal clearance. Table 1 Tolerances
Identiication umber Accuracy learances The identiication number example o Hex Head am Followers are shown below. Examples o identiication number Tolerances o Hex Head am Followers are shown in Table and
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationFall 2014 Mott Target Replacement and Ladder Position Re- Calibration JLAB- TN Joe Grames. September 17, 2014
Fall 2014 Mott Target Replacement and Ladder Position Re- Calibration JLAB- TN- 14-026 Joe Grames September 17, 2014 Abstract Target foils of gold, silver and copper used in the Spring 2014 re- commissioning
More informationSingle Contacts. ODU Springtac Contacts and ODU Lamella Contacts. Ø 0,76 mm to Ø 60 mm
Catalogue No. 0-e Single Contacts ODU Springtac Contacts and ODU Lamella Contacts Ø 0, mm to Ø 0 mm rue René Laennec 0 Taissy France Fax: 0 0, Tel : 0 9 9 E-mail:hvssystem@hvssystem.com Site web : www.hvssystem.com
More informationRF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes
More information16mm Size Metal Shaft Type
Potentiometer 6mm Size Type RK63 Series A wide range of versatility products applicable for various types of control. Typical Specifications Items Total tolerance Maximum operating voltage Total rotational
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
More informationTechnical Procedure for General Laboratory Equipment
Technical Procedure for General Laboratory Equipment 1.0 Purpose - This procedure specifies the required elements for the use of general laboratory equipment. 2.0 Scope - This procedure applies to all
More information