Preliminary Program INSECT 2018

Transcription

1 Preliminary Program INSECT Flow-channel cell experiments of X32Cr14 stainless steel in NaNO3 based electrolyte: the behavior of product films W. Hoogsteen Philips Drachten, The Netherlands 2. Experimental Study on the Effects of Electrochemical Postprocessing on Grinded Ti-6Al-4V Samples A. Ernst a,b, T. Hall a,b, A. Daneshi c, B. Azarhoushang c, D. Bähre a a Institute of Production Engineering, Saarland University, Germany b Center for Mechatronics and Automation, Saarbruecken, Germany c Insitute for Precision Machining, KSF, Hochschule Furtwangen University, Germany 3. Experimental comparison of electrochemical machining of selective laser melted and conventionally produced specimens F. Herter, T. Hall, D. Bähre Institute of Production Engineering, Saarbrücken, Germany 4. Experimental Research on the Bipolar Pulse Precise ElectroChemical Machining Technology H. Li, M. Zhang China Institute of Aeronautical Manufacturing Technology, Beijing, China 5. Application of Electrochemical Machining in the manufacturing of Complex Surface Structures of Integral Thin-walled Aeroengine Components H. Li, M. Zhang China Institute of Aeronautical Manufacturing Technology, Beijing, China 6. Study of Precision ECM in Stationary Electrolyte using Jump of Electrode M. Nakamura, M. Kunieda The University of Tokyo, Japan 7. Implementation of a PECM application for the processing of functional surfaces T. Hall a,b, A. Ernst a,b, T. Jene c, D. Bähre a a Institute of Production Engineering, Saarland University, Saarbruecken, Germany b Center for Mechatronics and Automation, Saarbruecken, Germany c Festo AG & Co. KG

2 8. Investigation of intermittent anodic dissolution process in counter-rotating electrochemical machining D. Wang, T. Li, B. He, Z. Zhu Nanjing University of Aeronautics and Astronautics, People s Republic of China 9. Removal Characteristics of High-Speed Steel in LaserChemical Machining H. Messaoudi a, D. Brand a, F. Thiemicke a, F. Vollertsen a,b a BIAS Bremer Institut für angewandte Strahltechnik, Bremen, Germany b University of Bremen, Faculty of Production Engineering-Mechanical Engineering & Process Engineering, Bremen, Germany 10. Comparison of laser induced thermal heat impact on 42CrMo4 in gaseous and liquid ambient S. Eckert a, G. B. Gadeschi b, M. Meinke b, F. Vollertsen a, W. Schröder b a BIAS Bremer Institut für angewandte Strahltechnik, Bremen, Germany b Aerodynamisches Institut, Aachen, Germany 11. Heat development during the ECM of Tungsten Carbide N. Junker a, M. Schneider b a TU Dresden IfWW, Dresden, Germany b Fraunhofer IKTS Dresden, Dresden, Germany 12. Oxygen development during the ECM on SiC L. Simunkova a, N. Junker b, M. Schneider b, A. Michaelis a,b a Fraunhofer IKTS Dresden, Dresden, Germany b TU Dresden IfWW, Dresden, Germany 13. Controlling hydrophobicity via electrochemical jet processing I. Bisterov a, J. Mitchell-Smith a, A. Speidel a, A.T. Clare a,b a Advanced Component Engineering Laboratory (ACEL), Advanced Manufacturing Technology Group, University of Nottingham, United Kingdom b Department of Mechanical, Materials and Manufacturing Engineering, Faculty of Science and Engineering, University of Nottingham China, China 14. Experimental Derivation of Process Input Parameters for Electrochemical Machining with Differentially Switched Currents A. Martin a, T. Petzold a, M. Hackert-Oschätzchen a, G. Meichsner b, A. Schubert a,b b Fraunhofer Institute for Machine Tools and Forming

3 15. Characterization of the Lateral Working Distance in Precise Electrochemical Machining of Differently Heat Treated Steel G. Meichsner a, M. Hackert-Oschätzchen b, S. Loebel b, L. Boenig c, A. Schubert a,b, M. Putz a a Fraunhofer Institute for Machine Tools and Forming b Professorship Micromanufacturing Technology, Faculty of Mechanical Engineering, Chemnitz University of c Boenig Präzisionswerkzeugbau GmbH, Höhn, Germany 16. Environmental sustainability of ECM hole sinking processes A. K. M. De Silva School of Engineering & Built Environment, Glasgow Caledonian University, Scotland, UK 17. Function and Formation of PECM-Process Energy Source for specific applications H. P. Schulze a,o. Kröning a, M. Herzig a a Leukhardt Schaltanlagen Systemtechnik GmbH Niederlassung Magdeburg, Magdeburg, Germany 18. Electrochemical jet processing for skeletal implant surfaces demonstrating enhanced stem cell differentia J. Mitchell-Smith a, V. Goriainov b, A. Speidel a, I. Bisterov a, A.T. Clare a,c a Advanced Component Engineering Laboratory (ACEL), Advanced Manufacturing Technology Group, University of Nottingham, United Kingdom b Bone and Joint Research Group, Centre for Human Development, Stem Cells and Regeneration, Human Development and Health, Institute of Developmental Sciences, University of Southampton, Southampton, United Kingdom c Department of Mechanical, Materials and Manufacturing Engineering, Faculty of Science and Engineering, University of Nottingham China, China 19. Hybrid process of electrochemical machining and mechanical grinding for cast nickel-base superalloys Y. C. Ge a,b, Z. Zhua a,b, D. Zhu a,b, D. Wang a,b, Z. Ma a,b a College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, China. b Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology, Nanjing, China. 20. Simulation-based Design of Electro-chemical Machining Processes for Microstructuring of High-strength Materials S. Loebel a, M. Hackert-Oschätzchen a, G. Meichsner b, M. Zinecker a, A. Schubert a,b b Fraunhofer Institute for Machine Tools and Forming

4 21. Design of a Test Rig for Local Surface Modification by Jet Plasma Electrolytic Polishing S. Quitzke a, O. Kröning b, A. Martin a, M. Hackert-Oschätzchen a, H. P. Schulze b, A. Schubert a b Leukhardt Schaltanlagen Systemtechnik GmbH, Niederlassung Magdeburg, Magdeburg, Germany 22. Analysis of the suitability of frontal gap experiments as a basis for the simulation of complex shaped parts in ECM F. Karges a, M. Zeis a, F. Hoffmeister a, N. Feiling a, M. Niegl a a MTU Aero Engines AG, München, Germany 23. Investigation of the electrolyte behaviour in the working gap of Mechano- Electrochemical Milling D. Van Camp a, B. Lauwers a a Department of Mechanical Engineering, KU Leuven & Member Flanders Make, Heverlee, Belgium 24. Potentials of additives for electrolytes in ECM processes M. Metzner, C. dos Santos, K. Schmid, C. Mock Fraunhofer Institute for Manufacturing Engineering and Automation IPA, Stuttgart, Germany 25. Quality and Cost Improvements in Precise Electrochemical Machining (PECM) by different Process Data Management Approaches M. Zeis a, S. Fritzke a, H. Redich a, N. Feiling a, M. Niegl a a MTU Aero Engines AG, München, Germany 26. Fast Wire flushing approach for wire electrochemical machining T. Herrig a, K. Oßwald b, I. Lochmahr b, A. Klink a, F. Klocke a, T. Bergs a a Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University, Aachen, Germany b Institute for Materials and Material Technologies, Pforzheim University, Pforzheim, Germany 27. Investigation on the Electrochemical Machinability of High Entropy Alloys S. Harst a, J. Su b, Z. Li b, A. Klink a, F. Klocke a, T. Bergs a a Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen University, Aachen, Germany b Max-Planck-Institut für Eisenwerkstoffe, Düsseldorf, Germany

5 28. Surface finish of AM parts by Plasma electrolytic Polishing H. Zeidler a,b, P. Parenti c, M. Annoni c, F.Böttger-Hiller b a Technische Universität Bergakademie Freiberg, chair for Additive Manufacturing, Freiberg, Germany b Beckmann-Institut für Technologieentwicklung e.v., Chemnitz, Germany c Politecnico di Milano, Dippartimento di Meccanica, Milano, Italy 29. Analysis of side gap phenomena in ECM manufacturing of gear geometries in turbine shafts T. Bergs a, G. Smeets a, S. Harst a, A. Petzoldt b, A. Klink a, F. Klocke a a Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University, Germany b MEWATEC Mechanische Werkstatt & Technologie e.k., Renchen, Germany 30. Evaluation of different short-cut methods for the simulation of PECM processes T. Bergs, L. Heidemanns, S. Harst, A. Klink, F. Klocke Laboratory for Machine Tools and Production Engineering (WZL) of RWTH Aachen University, Germany