Stair Crossover Assembly Instructions

Size: px
Start display at page:

Download "Stair Crossover Assembly Instructions"

Transcription

1 FRP Stair rossovers LRTNG YRS Stair rossover ssembly nstructions stimated nstallation Time: Man rew, ours SSMLY NSTRUTNS TM SRPTN STP : PRT NUMR FRP Stair rossover " learance 8. FRP Stair rossover 9/" learance 89. FRP Stair rossover 9" learance 89. FRP Stair rossover 8/" learance 88. FRP Stair rossover 8" learance 88. FRP Stair rossover " learance 8. TT STR SSMLS T PLTFRM SSMLY MPLT FRP STR RSSVR (PST SSMLY LLUSTRTN) ) Slide channels of Stair ssembly inside of Splice Plates on Platform ssembly and line up the holes. Refer to rawing Rev dated //7 for the exact configuration of the crossover. The illustration shown in these instructions may vary from the crossover you are assembling. ) For the stair crossovers up to and including the 8 inch (9 mm) clearance crossover (PN 88.): nstall two each / x hex head bolt assemblies (/ x bolt, each flat washers, and / nut) in the holes indicated. Use a flat washer under the bolt head and the nut. Torque the / inch nuts to ftlb (. Nm).Leave the holes for the guardrail posts open until Step Three. PLTFRM SSMLY /" MTR X LT SSMLS ) For the inch ( mm) clearance stair crossovers (PN 8.): nstall two each /8 x hex head bolt assemblies (/8 x bolt, each flat washers, and /8 nut) in the holes indicated. Use a flat washer under the bolt head and the nut. Torque the /8 inch nuts to ftlb (. Nm). Leave the holes for the guardrail posts open until Step Three. { STR SSMLY STP : SSML NRL T GURRLS ) ttach the stainless steel handrail brackets to the / inch dia round handrail tubes using two # x inch selftapping screws per handrail bracket. The pilot holes for the screws are shop drilled into the handrail tubes. e careful not to overtorque the screws to prevent stripping the holes. Note that you will be assembling a left hand and a right hand set of handrails for each stair. ) ttach the handrail to the guardrail by following etails 7 and 7 in rawing. The stainless steel handrail brackets connect to the /8 inch ( mm) post and / inch (. mm) rail with a /8 x hex head bolt assembly, flat washer, and backer plate. pply blue thread locking compound to the bolt threads prior to installing the nuts. Torque nuts until the assemblies are tightly clamped together. ) The 9 elbow at the top and bottom of the handrail connects to the / inch (. mm) square tube rail return by fitting it into the predrilled hole and securing it with a / x / round head bolt assembly. nstall the round head bolt so that the nut is oriented toward the inside of the assembly. Refer to etail 7. pply blue thread locking compound to the bolt threads prior to installing the nut. Torque nuts until the assemblies are tightly clamped together. NRL RKT SSMLY TL /". RUN NRL TU STNLSS STL R RKT PR NRL TU ( TTL) # x " SLF TPPNG SRW PR NRL RKT ( TTL) /8" X " X LT SSMLY 9 LW NRL NRL T GURRL SSMLY /" x /" RUN LT SSMLY PRRLL L STNLSS STL KR PLT ) Repeat for second Stair ssembly. Fibergrate omposite Structures nc. igh Performance omposite Solutions Since 9 Fibergrate omposite Structures nc. S QULTY RTF 98 F L T S [ ] SF eavy Metal rsenic arium admium hromium Lead Mercury Nickel Selenium Silver 87

2 Stair rossover ssembly nstructions STP : NSTLL GURRLS ) For the stair crossovers up to and including the 8 inch (9 mm) clearance crossover (PN 88.): nstall each Guardrail ssembly to the rossover by sandwiching the /8 inch x / inch ( x.8 mm) Square Tube Post Spacers between the Guardrail ssembly and the rossover and nstalling the / inch x / inch hex head bolt assemblies (/ inch x / inch bolt, each flat washers, and / nut) in the holes indicated. Where the post falls on a splice plate, use the shorter spacer. The longer spacers are for the locations where the post is bolted directly to the web of the channel. Use a flat washer under the bolt head and the nut. old Post Spacers in alignment with the edges of the post while torquing the nuts. Torque the nuts to ftlb (. Nm). ) For the inch ( mm) clearance stair crossovers (PN 8.): Follow the instructions above except use / inch x inch hex head bolt assemblies (/ inch x inch bolt, each flat washers, and / nut) for installing the Guardrail ssemblies. ) Repeat for all six Guardrail ssemblies. ) For the inch ( mm) clearance stair crossover (PN 8.): onnect the vertical portion of each horizontal and inclined Guardrail ssembly to each other using two each / x / hex head bolt assemblies (/ x / bolt, each flat washers, and / nut) in the factory drilled holes. pply blue thread locking compound to the bolt threads prior to installing the nuts. Torque nuts until the assemblies are approximately / ( mm) from each other. t will not be possible pull the two assemblies tightly together. RZNTL GURRL SSMLY Stair rossover ssembly nstructions STP : STP : NR STR RSSVR ) Prior to use, the Stair rossover must be anchored to the supporting surface to prevent tipping. nchor holes are 9/ inch (. mm) diameter and located at the bottom of the stair in four locations (see illustration on page ). nchoring hardware is not included. ) oncrete Floors: nchor Stair rossover to concrete floors using each / diameter expansion or adhesive concrete anchors. minimum embedment of / is required. ) Wood Floors: nchor Stair rossover to wooden floors with four each / x lag bolts. ) For other support conditions, contact a qualified engineer to develop adequate anchoring details. For installations on roofs or other areas where the supporting surface cannot be penetrated by fasteners, install the Roof Plate Kit by following Step Five below. PTNL RF PLT KT ) ttach the four x x /8 x long angles supplied with the kit to the x 9 x /" thick FRP plate using the /8 x / long flat head bolts supplied with the kit. Note the orientation of the angles. Torque the bolts to lbft (.9 Nm). '" x '9" x /" FRP PLT ( TTL) /8" x /" FLT LTS (8 TTL) ) Remove the four x x /8 x long angles at the bottom of the stairs by removing the two factory installed /8 x / hex head bolts at each angle. Retain the bolts; discard the angles. ) ttach this assembly to the bottom of the stair using the /8 x / removed in step. Torque the bolts to ftlb (.9 Nm). /" x /" X LT SSMLY PST SPR NR L 9/" MTR PLS ) efore placing the finished crossover onto the roof surface, protect the roof from abrasion following the roof manufacturer s recommendations. dd ballast as required to the locations indicated in rawing. NLN GURRL SSMLY /". X LT SSMLY MPLT FRP STR RSSVR WT PTNL RF PLT (PST SSMLY LLUSTRTN)

3 Part No. 8. FRP rossover Stair " learance, Stringer Weight = Lbs '8 /8" ' /" VRLL WT ' /8" UT T UT F STRNGRS RSSVR '/8" WN ' /8" '/8" WN TR /"Ø LS SP RLL FR /"Ø x /" LG. S.S. LT SSY'S FL NSTLL Q '7 /8" /" ' /8" ' /" '" /" '7 /8" /" ' /" /" ' /8" S T 7 SM. /"Ø LS SP RLL FR /"Ø x /" LG. S.S. LT SSY'S FL NSTLL Q NT T PRUTN: TTM RL F NLN GURRL JUST T FT WT RZNTL GURRL, JUST GURRL STS RNGLY. '" /8"X/" SQ. TU SPRS 7/" G /8"x/" SQ.TU SPRS /" F STRUTURL PLN '" '" S T 7 /"Ø X " LG. S.S. LT SSY P '" '" /" FNGR LRN 7" = '" ' /" '" GRTNG 9 /" = 9 /" 9 /" = '7" /"Ø X /" LG. S.S. LT SSY " LR '7 /8" LR 9 /" = '7" R FRP rossover Stair ssembly nstructions Q 8 /" ia. x /" Lg. S.S. olt ssy. TR ' /8" LR NS NRLS WN GRT NSNG ' /8" GRTNG GRT NSNG WN ' /8" LR NS NRLS TR 9 /" = 9 /" '" '8 /8" STN FRP RSSVR 9 /" = 9 /" P 8 /" ia. x " Lg. S.S. olt ssy. /" ia. x /" Lg. S.S. olt ssy. N /8" ia. x " Lg. ex ead olt ssembly M /" ia. x /" Lg. Round d S.S. olt ssy L 8 # x " Lg. S.S. Self Tap Screw K " x /" x G. S.S. Plate J S.S. andrail racket /" ia. Round Tube andrail /" ia. Round Tube andrail G 8 /8"x/" Sq. Tube Post Spacer ( 7/" Lg.) F 8 /8"x/" Sq. Tube Post Spacer ( /" Lg.) nclined Sq. Tube Guardrail ssembly M L WN LP SSY. GRTNG PLN PLN FRP RSSVR FR TRS S T 7 nclined Sq. Tube Guardrail ssembly orizontal Sq. Tube Guardrail ssembly Stair ssembly Platform ssembly SSY. SRPTN LL F MTRLS LGN: ="x"x/" NGL =8"x /"x/8" NNL = GURRL = GURRL PST = GURRL RTURN = R = NRL M Y //7 // T NW S RULS N7 FR PRUTN N RVSN L L // K. Y //7 T FRTN TLRNS (U.N..) LNGT WT L L. R. UTS NTS SQUR F UT ML GRTNG +/8,/ +/8,/ ±/ NGULRTY ± ± NT STK TLRNS WRTTN UTRZTN F FRGRT MPST STRUTURS N. PULTRU GRTNG ±/ TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T YNFRM SPS N/ N/ ± GRTNG: RVX " P /" SQ. MS ML LR: K.GRY TRS: RVX FRTR /" P /"x" RT. MS ML LR: K.GRY YNFRM SPS: SFR LR: K.GRY RWR: SS TNG: RFRN WGS.: SURF: MNSUS SURF: MNSUS YNFRM GURRL: SFR LR: YLLW GRTNG... SSYS.: M, M FLTST: /" NTRTR: " FRP RSSVR rawing No. RWN Y: T: M // STRUTURL SGNR: 9 FM STPNVLL, TXS 7 TN LV P.. Phone: (8) 7 PRJT RNTR: ust : 8 SL: WG. ST.: F

4 Part No. 89. FRP rossover Stair 9 /" learance, Stringer Weight = Lbs 7' /8" NT T PRUTN: TTM RL F NLN GURRL JUST T FT WT RZNTL GURRL, JUST GURRL STS RNGLY. ' /8" ' /8" ' /8" ' /" VRLL WT ' /8" UT T UT F STRNGRS RSSVR WN WN TR ' /8" ' /8" 9 /" /" /" GP 7'9 /" /" ' /" GP ' /8" " ' /" " /" 9 /" ' /8" /8"X/"SQ.TU SPRS 7/" G /8"X/"SQ.TU SPRS /" F S T 7 STRUTURL PLN '" S T 7 '" /" TR FNGR LRN ' /8" LR NS NRLS 9 /" = '7" WN GRT NSNG '" GRTNG ' /8" GRTNG GRT NSNG 9 /" = '7" WN ' /8" LR NS NRLS TR 9" = ' /" /"Ø x /" LG. S.S. LT SSY /"Ø x " LG. S.S. LT SSY P '7 /8" LR '7 /" LR '" '" 9 /" = ' /" Q FRP rossover Stair ssembly nstructions P 8 /" ia. x " Lg. S.S. olt ssy. /" ia. x /" Lg. S.S. olt ssy. N 8 /8" ia. x " Lg. ex ead olt ssembly M 8 /" ia. x /" Lg. Round d S.S. olt ssy L # x " Lg. S.S. Self Tap Screw K 8 " x /" x G. S.S. Plate J 8 S.S. andrail racket /" ia. Round Tube andrail /" ia. Round Tube andrail G 8 /8"x/" Sq. Tube Post Spacer ( 7/" Lg.) M L WN LP SSY. GRTNG PLN FR TRS S T 7 9 /" = '7" '" 7' /8" 9 /" = '7" F /8"x/" Sq. Tube Post Spacer ( /" Lg.) nclined Sq. Tube Guardrail ssembly nclined Sq. Tube Guardrail ssembly orizontal Sq. Tube Guardrail ssembly Stair ssembly PLN FRP RSSVR STN FRP RSSVR Platform ssembly SSY. SRPTN LL F MTRLS LGN: ="x"x/" NGL =8"x /"x/8" NNL = GURRL = GURRL PST = GURRL RTURN = R = NRL M Y //7 // T NW S RULS N7 FR PRUTN N RVSN L L // K. Y //7 T FRTN TLRNS (U.N..) LNGT WT L L. R. UTS NTS SQUR F UT ML GRTNG +/8,/ +/8,/ ±/ NGULRTY ± ± NT STK TLRNS WRTTN UTRZTN F FRGRT MPST STRUTURS N. PULTRU GRTNG ±/ TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T YNFRM SPS N/ N/ ± GRTNG: RVX " P /" SQ. MS ML LR: K.GRY TRS: RVX FRTR /" P /"x" RT. MS ML LR: K.GRY YNFRM SPS: SFR LR: K.GRY RWR: SS TNG: RFRN WGS.: SURF: MNSUS SURF: MNSUS YNFRM GURRL: SFR LR: YLLW GRTNG... SSYS.: M, M FLTST: /" NTRTR: 9 /" FRP RSSVR rawing No. RWN Y: T: M // STRUTURL SGNR: 9 FM STPNVLL, TXS 7 TN LV P.. Phone: (8) 7 PRJT RNTR: ust : 88 SL: WG. ST.: F

5 Part No. 89. FRP rossover Stair 9" learance, Stringer Weight = Lbs 8 STN NT T PRUTN: TTM RL F NLN GURRL JUST T FT WT RZNTL GURRL, JUST GURRL STS RNGLY. 8' /8" ' 7/8" ' /8" ' 7/8" 9' /" ' /" VRLL WT ' /8" UT T UT F STRNGRS RSSVR WN WN TR ' /8" ' /8" '7" /" /" GP /" ' /" GP ' /8" " ' /" " /" '7" S T 7 ' /8" /8"X/"SQ.TU SPRS 7/" G STRUTURL PLN /8"X/"SQ.TU SPRS /" F '" S T 7 /" TR FNGR LRN ' /8" LR NS NRLS 9 /" = ' /" WN GRT NSNG 7'9" '" GRTNG ' /8" GRTNG GRT NSNG 9 /" = ' /" WN ' /8" LR NS NRLS TR 9 /" = '" '" '" /"Ø X /" LG. S.S. LT SSY 9 /" = ' /" /"Ø X " LG. S.S. LT SSY P '7 /8" LR '" '" LR 9 /" = ' /" '" '" 9 /" = '" Q FRP rossover Stair ssembly nstructions P 8 /" ia. x " Lg. S.S. olt ssy. /" ia. x /" Lg. S.S. olt ssy. N 8 /8" ia. x " Lg. ex ead olt ssembly M 8 /" ia. x /" Lg. Round d S.S. olt ssy L # x " Lg. S.S. Self Tap Screw K 8 " x /" x G. S.S. Plate J 8 S.S. andrail racket /" ia. Round Tube andrail /" ia. Round Tube andrail G 8 /8"x/" Sq. Tube Post Spacer ( 7/" Lg.) 8' /8" F /8"x/" Sq. Tube Post Spacer ( /" Lg.) nclined Sq. Tube Guardrail ssembly M L WN LP SSY. GRTNG PLN FR TRS S T 7 STN FRP RSSVR nclined Sq. Tube Guardrail ssembly orizontal Sq. Tube Guardrail ssembly Stair ssembly PLN FRP RSSVR Platform ssembly SSY. SRPTN LL F MTRLS LGN: ="x"x/" NGL =8"x /"x/8" NNL = GURRL = GURRL PST = GURRL RTURN = R = NRL M Y //7 // T NW S RULS N7 FR PRUTN N RVSN L L // K. Y //7 T FRTN TLRNS (U.N..) LNGT WT L L. R. UTS NTS SQUR F UT ML GRTNG +/8,/ +/8,/ ±/ NGULRTY ± ± NT STK TLRNS WRTTN UTRZTN F FRGRT MPST STRUTURS N. PULTRU GRTNG ±/ TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T YNFRM SPS N/ N/ ± GRTNG: RVX " P /" SQ. MS ML LR: K.GRY TRS: RVX FRTR /" P /"x" RT. MS ML LR: K.GRY YNFRM SPS: SFR LR: K.GRY RWR: SS TNG: RFRN WGS.: SURF: MNSUS SURF: MNSUS YNFRM GURRL: SFR LR: YLLW GRTNG... SSYS.: M, M FLTST: /" NTRTR: 9" FRP RSSVR rawing No. RWN Y: T: M // STRUTURL SGNR: 9 FM STPNVLL, TXS 7 TN LV P.. Phone: (8) 7 PRJT RNTR: ust : 8 SL: WG. ST.: F

6 Part No. 88. FRP rossover Stair 8 /" learance, Stringer Weight = Lbs ' /8" STN NT T PRUTN: TTM RL F NLN GURRL JUST T FT WT RZNTL GURRL, JUST GURRL STS RNGLY. ' /8" ' /8" ' /8" ' /" ' /" VRLL WT ' /8" UT T UT F STRNGRS RSSVR WN WN TR ' /8" ' /8" ' /" /" /" GP /" ' /" GP ' /8" " ' /" " /" S T 7 ' /" ' /8" /8"X/"SQ.TU SPRS 7/" G /8"X/"SQ.TU SPRS /" F STRUTURL PLN '" S T 7 9'" /" TR FNGR LRN ' /8" LR NS NRLS 9 /" = '" '" GRTNG WN GRT NSNG ' /8" GRTNG GRT NSNG 9 /" = '" WN ' /8" LR NS NRLS TR 9 /" = ' /" '" '" /"Ø X /" LG. S.S. LT SSY /"Ø X " LG. S.S. LT SSY P ' /" LR '" '" 9 /" = ' /" Q FRP rossover Stair ssembly nstructions P 8 /" ia. x " Lg. S.S. olt ssy. /" ia. x /" Lg. S.S. olt ssy. N 8 /8" ia. x " Lg. ex ead olt ssembly M 8 /" ia. x /" Lg. Round d S.S. olt ssy L # x " Lg. S.S. Self Tap Screw K 8 " x /" x G. S.S. Plate J 8 S.S. andrail racket /" ia. Round Tube andrail /" ia. Round Tube andrail '7 /8" LR G 8 /8"x/" Sq. Tube Post Spacer ( 7/" Lg.) F /8"x/" Sq. Tube Post Spacer ( /" Lg.) M L WN LP SSY. GRTNG PLN FR TRS S T 7 9 /" = '" '" ' /8" 9 /" = '" nclined Sq. Tube Guardrail ssembly nclined Sq. Tube Guardrail ssembly orizontal Sq. Tube Guardrail ssembly Stair ssembly PLN FRP RSSVR STN FRP RSSVR Platform ssembly SSY. SRPTN LL F MTRLS LGN: ="x"x/" NGL =8"x /"x/8" NNL = GURRL = GURRL PST = GURRL RTURN = R = NRL M Y //7 // T NW S RULS N7 FR PRUTN N RVSN L L // K. Y //7 T FRTN TLRNS (U.N..) LNGT WT L L. R. UTS NTS SQUR F UT ML GRTNG +/8,/ +/8,/ ±/ NGULRTY ± ± NT STK TLRNS WRTTN UTRZTN F FRGRT MPST STRUTURS N. PULTRU GRTNG ±/ TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T YNFRM SPS N/ N/ ± GRTNG: RVX " P /" SQ. MS ML LR: K.GRY TRS: RVX FRTR /" P /"x" RT. MS ML LR: K.GRY YNFRM SPS: SFR LR: K.GRY RWR: SS TNG: RFRN WGS.: SURF: MNSUS SURF: MNSUS YNFRM GURRL: SFR LR: YLLW GRTNG... SSYS.: M, M FLTST: /" NTRTR: 8 /" FRP RSSVR rawing No. RWN Y: T: M // STRUTURL SGNR: 9 FM STPNVLL, TXS 7 TN LV P.. Phone: (8) 7 PRJT RNTR: ust : 8 SL: WG. ST.: F

7 Part No. 88. FRP rossover Stair 8" learance, Stringer Weight = 7Lbs STN NT T PRUTN: TTM RL F NLN GURRL JUST T FT WT RZNTL GURRL, JUST GURRL STS RNGLY. ' 7/" ' /" ' 7/8" ' /8" ' 7/8" '9 /8" /" /" GP /" ' /" GP '9 /8" ' /8" '" " ' /" " /" '" ' /8" ' /" VRLL WT ' /8" UT T UT F STRNGRS RSSVR WN /8"X/"SQ.TU /8"X/"SQ.TU SPRS 7/" SPRS /" F G STRUTURL PLN WN TR S T 7 S T 7 '" /" TR FNGR LRN ' /8" LR NS NRLS PPRX. 9 /" = ' /" WN GRT NSNG '" '" GRTNG ' /8" GRTNG GRT NSNG PPRX. 9 /" = ' /" WN '" LR /"Ø X " LG S.S. LT SSY. P '7 /8" LR /"Ø x /" LG. S.S. LT SSY. '" '" 9 /" = '9" Q FRP rossover Stair ssembly nstructions P 8 /" ia. x " Lg. S.S. olt ssy. /" ia. x /" Lg. S.S. olt ssy. N 8 /8" ia. x " Lg. ex ead olt ssembly M 8 /" ia. x /" Lg. Round d S.S. olt ssy L # x " Lg. S.S. Self Tap Screw K 8 " x /" x G. S.S. Plate J 8 S.S. andrail racket /" ia. Round Tube andrail /" ia. Round Tube andrail G 8 /8"x/" Sq. Tube Post Spacer ( 7/" Lg.) PPRX. 9 /" = ' /" '" PPRX. 9 /" = ' /" F /8"x/" Sq. Tube Post Spacer ( /" Lg.) nclined Sq. Tube Guardrail ssembly M L WN LP SSY. GRTNG PLN FR TRS S T 7 ' /8" nclined Sq. Tube Guardrail ssembly orizontal Sq. Tube Guardrail ssembly Stair ssembly PLN FRP RSSVR STN FRP RSSVR Platform ssembly SSY. SRPTN LL F MTRLS LGN: ="x"x/" NGL =8"x /"x/8" NNL = GURRL = GURRL PST = GURRL RTURN = R = NRL M Y //7 // T NW S RULS N7 FR PRUTN N RVSN L L // K. Y //7 T FRTN TLRNS (U.N..) LNGT WT L L. R. UTS NTS SQUR F UT ML GRTNG +/8,/ +/8,/ ±/ NGULRTY ± ± NT STK TLRNS WRTTN UTRZTN F FRGRT MPST STRUTURS N. PULTRU GRTNG ±/ TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T YNFRM SPS N/ N/ ± GRTNG: RVX " P /" SQ. MS ML LR: K.GRY TRS: RVX FRTR /" P /"x" RT. MS ML LR: K.GRY YNFRM SPS: SFR LR: K.GRY RWR: SS TNG: RFRN WGS.: SURF: MNSUS SURF: MNSUS YNFRM GURRL: SFR LR: YLLW GRTNG... SSYS.: M, M FLTST: /" NTRTR: 8" FRP RSSVR rawing No. RWN Y: T: M // STRUTURL SGNR: 9 FM STPNVLL, TXS 7 TN LV P.. Phone: (8) 7 PRJT RNTR: ust : 88 SL: WG. ST.: F

8 Part No. 8. FRP rossover Stair " learance, Stringer Weight = 7Lbs ' /8" STN NT T PRUTN: TTM RL F NLN GURRL JUST T FT WT RZNTL GURRL, JUST GURRL STS RNGLY. ' /" ' /" ' /" '8 /" ' /8" /" GP /" GP ' /" ' /8" ' 7/8" VRLL WT ' /" UT T UT F STRNGRS RSSVR WN WN TR ' /8" ' /" ' /" S T 7 /" /" " ' /" " ' /" ' /" S T 7 ' /8" /8"X/"SQ.TU SPRS x 7/8" LNG /8"X/"SQ.TU SPRS /8" LNG F '" G STRUTURL PLN /" TR FNGR LRN ' /" LR NS NRLS 7 9 /" = ' /" WN GRT NSNG '" '" GRTNG GRT NSNG 7 9 /" = ' /" WN TR 8 9 /" = '" '" '" /"Ø x " LNG S.S. LT SSY /8"Ø x " LG. S.S. LT SSY P '" LR '" '" 8 9 /" = '" Q FRP rossover Stair ssembly nstructions P 8 /8" ia. x " Lg. S.S. olt ssy. /" ia. x " Lg. S.S. olt ssy. N /8" ia. x " Lg. ex ead olt ssembly M 8 /" ia. x /" Lg. Round d S.S. olt ssy L # x " Lg. S.S. Self Tap Screw K " x /" x G. S.S. Plate J S.S. andrail racket /" ia. Round Tube andrail M L WN LP SSY. FR TRS S T /" = ' /" ' /" LR '" 7 9 /" = ' /" /" ia. Round Tube andrail G 8 /8"x/" Sq. Tube Post Spacer ( 7/8" Lg.) F /8"x/" Sq. Tube Post Spacer ( /8" Lg.) GRTNG PLN PLN FRP RSSVR ' /8" STN FRP RSSVR nclined Sq. Tube Guardrail ssembly nclined Sq. Tube Guardrail ssembly orizontal Sq. Tube Guardrail ssembly Stair ssembly Platform ssembly SSY. SRPTN LL F MTRLS LGN: ="x"x/" NGL ="x /"x/" NNL = GURRL = GURRL PST = GURRL RTURN = R = NRL M Y //7 // T NW S RULS N7 FR PRUTN N RVSN L //7 L // K. Y T FRTN TLRNS (U.N..) LNGT WT L L. R. UTS NTS SQUR F UT ML GRTNG +/8,/ +/8,/ ±/ NGULRTY ± ± NT STK TLRNS WRTTN UTRZTN F FRGRT MPST STRUTURS N. PULTRU GRTNG ±/ TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T YNFRM SPS N/ N/ ± GRTNG: RVX " P /" SQ. MS ML LR: K.GRY TRS: RVX FRTR /" P /"x" RT. MS ML LR: K.GRY YNFRM SPS: SFR LR: K.GRY RWR: SS TNG: RFRN WGS.: SURF: MNSUS SURF: MNSUS YNFRM GURRL: SFR LR: YLLW GRTNG... SSYS.: M, M FLTST: /" NTRTR: " FRP RSSVR rawing No. RWN Y: T: M // STRUTURL SGNR: 9 FM STPNVLL, TXS 7 TN LV P.. Phone: (8) 7 PRJT RNTR: ust : 8 SL: WG. ST.: F

9 FRP rossover Stair dditional etails Pilot holes for screws are shop drilled /"Ø x /" R.. S.S. LT SSY. M /"Ø x /" FRP RUN " /x/" TU PTR M L WN R. TU (SP N T M L WN LP SSY NRL NRL NNTR) LP SSY M L WN M L WN LP SSY LP SSY PLN VW GURRL /"Ø x /" FRP PST RUN TU PLT L SP /" x /8" RLL N NRL GURRL FR SLF TP SRW RTURN () # x " LG. S.S. SLF TP SRW K FL NSTLL /8"Ø x " LG. "x /"x G. S.S. PLT (N # 77) LT SSY. FL NSTLL (N # 79) S.S. RKT FL TT T NRL (N # 79) N FX LW /"Ø L NRL NNTR N RTURN (SP N & RVT T /" RUN TU) FRNT VW 7 FRTR 7 S.S. NRL RKT T PST 7 TL NRL T RTURN NNTN GRTNG: LGN: FRTN TLRNS (U.N..) = GURRL ML PULTRU YNFRM ="x"x/" NGL GRTNG GRTNG SPS LR: SURF: =8"x /"x/8" NNL = GURRL PST LNGT +/8,/ TRS: WT +/8,/ = GURRL RTURN = R Y T RVSN K. Y T L L. R. UTS NTS SQUR F UT ±/ NGULRTY ± ± ±/ NT STK TLRNS TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T WRTTN UTRZTN F FRGRT MPST STRUTURS N. N/ N/ ± LR: SURF: YNFRM SPS: SFR LR: K.GRY RWR: SS RFRN WGS.: YNFRM GURRL: LR: TNG: FLTST: /" GRTNG... SSYS.: dditional etails For FRP rossover Stairs NTRTR: RWN Y: T: M // STRUTURL SGNR: TN LV P.. PRJT RNTR: ust : SL: 9 FM STPNVLL, TXS 7 Phone: (8) 7 7 F 8 WG. ST.:.7 L J 7/8" /8" //7 NW S RULS N7 L //7 Part No. 8 FRP rossover Stair PTNL S PLT Weight = Lbs '9" PLT 8"x /"x/8" R "x /"x/" FRP NNL STRNGR '" '" 8"x8"x" LLST S RQUR (Y TRS) RSSVR /" TK. FRP PLT PLN VW "x"x/8" " Lg. FRP NGL LP /8"Ø x /" Lg. S.S. LT SSY. FL NSTLL /8"Ø x /" Lg. S.S. SK LT SSY. SP TT STN 8 PTNL SPLT FR RFTP PPLTNS PRT 8 GRTNG: LGN: FRTN TLRNS (U.N..) = GURRL ML PULTRU YNFRM ="x"x/" NGL GRTNG GRTNG SPS LR: SURF: =8"x /"x/8" NNL = GURRL PST LNGT +/8,/ TRS: WT +/8,/ = GURRL RTURN = R Y T RVSN K. Y T L L. R. UTS NTS SQUR F UT ±/ NGULRTY ± ± ±/ NT STK TLRNS TS RWNG N LL SGN NFRMTN S T SL PRPRTY F FRGRT MPST STRUTURS N. RWNG S NT T SLS R P WTUT T WRTTN UTRZTN F FRGRT MPST STRUTURS N. N/ N/ ± LR: SURF: YNFRM SPS: SFR LR: K.GRY RWR: SS RFRN WGS.: LR: TNG: FLTST: /" YNFRM GURRL: GRTNG... SSYS.: LL F MTRLS PTNL S PLT FR RFTP PPLTNS rawing No. NTRTR: RWN Y: T: M // STRUTURL SGNR: TN LV P.. PRJT RNTR: ust : SL: 9 FM STPNVLL, TXS 7 Phone: (8) 7 8 F 8 WG. ST.:.7 PLT /8" /8" R M // FR PRUTN N L // SRPTN '" //7 NW S RULS N7 L //7 8 /8" ia X /" S.S olt ssy. /" Thk. ase Plate ssembly

10 Fibergrate Products & Services Fibergrate Molded Grating Fibergrate molded gratings are designed to provide the ultimate in reliable performance, even in the most demanding conditions. Fibergrate offers the widest selection in the market with multiple resins and more than twenty grating configurations available in many panel sizes and surfaces. SafeTSpan Pultruded ndustrial and Pedestrian Gratings ombining corrosion resistance, longlife and low maintenance, SafeTSpan provides unidirectional strength for industrial and pedestrian pultruded grating applications. ynaform Structural Shapes Fibergrate offers a wide range of standard ynaform pultruded structural profiles for industrial and commercial use, including beams, wide flange beams, round and square tubes, bars, rods, channels, leg angles and plate. ynarail & ynaround Guardrail, andrail & Ladders asily assembled from durable components or engineered and prefabricated to your specifications, ynarail square tube and ynaround round tube railing systems and ynarail safety ladder systems meet or exceed S and strict building code requirements for safety and design. ustom omposite Solutions ombining Fibergrate s design, manufacturing and fabrication services allows Fibergrate to offer custom composite solutions to meet our client s specific requirements. ither through unique pultruded profiles or custom open molding, Fibergrate can help bring your vision to reality. esign & Fabrication Services ombining engineering expertise with an understanding of fiberglass applications, Fibergrate provides turnkey design and fabrication of fiberglass structures, including platforms, catwalks, stairways, railings and equipment support structures. Worldwide Sales & istribution Network Whether a customer requires a platform in a mine in South frica to grating on an oil rig in the North Sea, or walkways in a Wisconsin cheese plant to railing at a water treatment facility in razil; Fibergrate has sales and service locations throughout the world to meet the needs and exceed the expectations of any customer. Fibergrate omposite Structures nc. believes the information contained here to be true and accurate. Fibergrate makes no warranty, expressed or implied, based on this literature and assumes no responsibility for the consequential or incidental damages in the use of these products and systems described, including any warranty of merchantability or fitness. nformation contained here can be for evaluation only. The marks and trade names appearing herein, whether registered or unregistered, are the property of Fibergrate omposite Structures nc. Fibergrate nc. Part No. 8898/7. Printed in the US [ ] SF eavy Metal rsenic arium admium hromium Lead Mercury Nickel Selenium Silver S QULTY RTF 98 F L T S 87 Fax: 97 mail: info@fibergrate.com

MATERIAL SEE BOM ANGLES = 2 > 2000 DATE MEDIUM FINISH

MATERIAL SEE BOM ANGLES = 2 > 2000 DATE MEDIUM FINISH NOTS:. LN MTN SUR WT NTUR/SOPROPYL LOOL PROR TO RN L OR LOO. PPLY LOTT 4 ON TRS. TORQU TO. Nm / 00 lb-in 4. TORQU TO 45-50 Nm / - lb-ft 5. TORQU TO Nm / 4.5 lb-ft. TORQU TO 0 Nm / lb-in. TORQU TO 5.5 Nm

More information

THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)

THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg) CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5

More information

PARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU

PARTS MANUAL 2 INCH CHIPPER/SHREDDER.   SC cc SUBARU www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you

More information

QUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING

QUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING QUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING The QUAKE BRAKE TM Seismic Dampening Device. The QUAKE BRAKE TM was Certified NEBS Level 3 Zone Compliant after being tested in accordance

More information

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles

INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make

More information

DOCUMENT STATUS: RELEASE

DOCUMENT STATUS: RELEASE RVSON STORY RV T SRPTON O Y 0-4-0 RLS OR PROUTON 5 MM -04-0 NS TRU PLOT PROUTON -- S O O OR TLS 30 MM 03-3-0 3-044 N 3-45, TS S T TON O PROTTV RM OVR. 3 05--0 LT 3-004, NOT, 3-050 3 0//00 UPT ST ROM SN,

More information

Limited Use Document This presentation is provided in the interest of the free exchange of ideas but may not represent the final or complete results

Limited Use Document This presentation is provided in the interest of the free exchange of ideas but may not represent the final or complete results Limited Use Document This presentation is provided in the interest of the free exchange of ideas but may not represent the final or complete results of the research. The presentation is regarded as fully

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about

More information

HT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved

HT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400 INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37851 Application: HONDA 400 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have

More information

DOCUMENT STATUS: MINTP0 E-ST5080, BASE, NO DISPLAY VENDOR: 15.5 INCH MATERIAL SEE BOM FINISH REVISION HISTORY ITEM NO. PART NUMBER DESCRIPTION

DOCUMENT STATUS: MINTP0 E-ST5080, BASE, NO DISPLAY VENDOR: 15.5 INCH MATERIAL SEE BOM FINISH REVISION HISTORY ITEM NO. PART NUMBER DESCRIPTION RV T RVSON STORY SRPTON O Y 0-0-0 PROUTON RLS K. N NOTS:. SRL LL NORMTON: a) VOLTS: V b) MPS:.0 c) YLS: N/ d) WTTS: W e) PS: N/ f) PX #: PX. RTTON LOOS: S / / LN R WT SOPROPYL LOLOL PROR TO PLN.. PK M:

More information

HEAVY DUTY SWING-OUT VALVE

HEAVY DUTY SWING-OUT VALVE ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300 INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37850 Application: HONDA 300 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have

More information

HEAVY DUTY SWING-OUT VALVE

HEAVY DUTY SWING-OUT VALVE ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion

More information

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion

More information

Column w/laterals. Steel Column A992 50ksi Steel (see sheets 4-7)

Column w/laterals. Steel Column A992 50ksi Steel (see sheets 4-7) olumn w/ SOREOR HEIGHT WITH ddtional display area consisting signs, arches, message centers or video above or below the scoreboard. (see sheets -6) for column and pier sizing) TOP SOREOR SETION Overall

More information

PLAY OFF 48" FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS

PLAY OFF 48 FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS PLAY OFF 48" FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS NG1031F THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h e g l o

More information

Terminal Block Accessories

Terminal Block Accessories Kliptite (Quick onnect) - Single Row Specifications: Terminal lock ccessories Kliptite (Quick onnect) accept standard female wire terminals. These Klipties are ideal for applications that require a positive,

More information

HUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS

HUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS HUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS NG2515PB/NG2520PB THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h

More information

/2" Heavy Duty Swing-Out

/2 Heavy Duty Swing-Out Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible

More information

A.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual

A.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual 70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL

More information

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity

VX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing

More information

ATV WP2 FRONT MOUNT PUSH TUBE

ATV WP2 FRONT MOUNT PUSH TUBE ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle

More information

CF (Conflat Flange) Fittings - Adapters. (505)

CF (Conflat Flange) Fittings - Adapters.  (505) F (onflat ) 1 Fittings - dapters www.idealvac.com (505)72-0037 1 Vacuum Fittings - dapters - olt Kits F - onflat F onflat flanges (F) are used for ultra- Vin elasmer gaskets can be used over and over but

More information

Installation, Maintenance and Operating Instructions

Installation, Maintenance and Operating Instructions Trunnion-Design Ball Valves 12 20 (DN 300 500) Series 7150 12 (DN 300) Series 730S 12 20 (DN 300 500) Series 7300 14 24 (DN 350 600) Series 9150 14 24 (DN 350 600) Series 9300 Installation, Maintenance

More information

Hilti North America Installation Technical Manual Technical Data MI System Version

Hilti North America Installation Technical Manual Technical Data MI System Version MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these

More information

PUSH TUBE STANDARD DUTY

PUSH TUBE STANDARD DUTY PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country

More information

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608 Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the

More information

Safe-T-Span High Load Capacity Grating

Safe-T-Span High Load Capacity Grating Safe-T-Span High Load Capacity Grating High Load Capacity (HI) pultruded grating is yet another product in the arsenal of engineered fiberglass reinforced plastic (FRP) solutions by Fibergrate. While capitalizing

More information

MINI POST SERIES BALUSTRADE SYSTEM INSTALLATION GUIDE PRODUCT CODE: MPS-RP

MINI POST SERIES BALUSTRADE SYSTEM INSTALLATION GUIDE PRODUCT CODE: MPS-RP MN POST SRS LUSTR SYSTM NSTLLTON U PROUT O: MPS-RP 0 R0 WLL LN 0 RONT LVTON VW R0 N P 0 T RUR LOK LOT ON LSS. SLON SL TYP. OT SS 000 LSS T 0 00 SRS LSS WT 00/00 (0mm NRMNTS VLL) MX. 000 00-0 (ROMMN) 00

More information

FOREMAN ASSEMBLY / OWNER S MANUAL

FOREMAN ASSEMBLY / OWNER S MANUAL ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.

More information

BUILDING HOME CONSTRUCTION

BUILDING HOME CONSTRUCTION 1 Area Items: DECK # 1 CONST-COMPANY Proposed DECK # 1 DESCRIPTION QNTY REMOVE REPLACE TOTAL 1. Stair stringer - Labor only 96.00 LF 0.00 4.47 429.12 2. Stair riser - Labor only 28.00 EA 0.00 12.56 351.68

More information

A.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual

A.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual 70 38TH AVE W PO BOX 57 SPENCER, IA 530 PHONE: 7-6-49 FAX: 7-6-048 SERVICE: 800-84- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. 5 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER

More information

WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.

WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death. INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches

More information

2.4M SERIES 1241 ANTENNA

2.4M SERIES 1241 ANTENNA 4096-859 Revision D April 19, 2016 2.4M SERIES 1241 ANTENNA General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com General Dynamics Page 1 4/19/2016

More information

10012 Creviston DR NW Gig Harbor, WA fax

10012 Creviston DR NW Gig Harbor, WA fax C.R. Laurence Co., Inc. ATTN: Chris Hanstad 2503 East Vernon Los Angeles, CA 90058 27 March 2013 SUBJ: CRL SRS STANDOFF RAILING SYSTEM GLASS BALUSTRADE GUARDS The SRS Standoff Railing System is an engineered

More information

FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

INSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500

INSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500 WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer

More information

BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs

BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL

More information

INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800

INSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800 WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer

More information

CBRD30CP3 & BOWRD30CP INSTRUCTION MANUAL

CBRD30CP3 & BOWRD30CP INSTRUCTION MANUAL CBRD30CP3 & BOWRD30CP INSTRUCTION MANUAL PROLOGUE Your BSA Illuminated sight is for use on both compound and standard bows. Each version of the BSA illuminated sight has a specific reticle to help maintain

More information

*Refer to IBC Section , applicable when fall protection is required. Glass stresses are designed for a safety factor of of 4.0 (IBC ).

*Refer to IBC Section , applicable when fall protection is required. Glass stresses are designed for a safety factor of of 4.0 (IBC ). Architectural Railing Division C.R.Laurence Co., Inc. 2503 E Vernon Ave. Los Angeles, CA 90058 (T) 800.421.6144 (F) 800.587.7501 www.crlaurence.com 12 JAN 2011 SUBJ: TAPER-LOC SYSTEM DRY-GLAZE LAMINATED

More information

PLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or

PLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

MATERIAL SEE BOM ANGLES = 2 FINISH N/A

MATERIAL SEE BOM ANGLES = 2 FINISH N/A 9 NOTS:. SSML N NSPT PR SOP 0-9... NSTLL K STKR N X L STKR TO NS O SROU WT TP. 3. PR-PK LNR RNS WT P (XTRM PRSSUR NL R ) RS OR NNRN PPROV QUVLNT. 4. OLOR TT Y T SLS ORR. RRN T MNS OM OR OMPONNTS ONTNN

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 030088, DB 03000 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering purposes

More information

SECTION 23 - METRIC DESIGN INFORMATION. Table of Contents

SECTION 23 - METRIC DESIGN INFORMATION. Table of Contents SECTION 23 - METRIC DESIGN INFORMATION Table of Contents Metric System Conversions and Abbreviations... 23-3 EXTREN Availability List... 23-4 EXTREN vs. Traditional Materials... 23-6 SECTION 23 METRIC

More information

Introduction...COMB-2 Design Considerations and Examples...COMB-3

Introduction...COMB-2 Design Considerations and Examples...COMB-3 SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant

More information

ASSEMBLY / OWNER S MANUAL

ASSEMBLY / OWNER S MANUAL ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.

More information

WARRANTY AND ASSISTANCE

WARRANTY AND ASSISTANCE TM WeatherHawk WARRANTY AND ASSISTANCE This equipment is warranted by CAMPBELL SCIENTIFIC (CANADA) CORP. ( CSC ) to be free from defects in materials and workmanship under normal use and service for twelve

More information

INSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526

INSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526 ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation

More information

CATALOGUE. Visit our website at airmastersigns.com to see a complete and up to date listing of all our sign products.

CATALOGUE. Visit our website at airmastersigns.com to see a complete and up to date listing of all our sign products. CATALOGUE N E E D A C U S T O M O R D E R? C A L L U S AT 1-8 0 0-7 8 8-6 8 0 5 O R I N W I N N I P E G 2 0 4-9 4 4-7 4 4 6 O R E M A I L U S A T S I G N S @ A I R M A S T E R S A L E S. C O M T O D I

More information

Visit any one of our 30 locations or visit us on line at

Visit any one of our 30 locations or visit us on line at TYPE IA ALUMINUM 2886509079 2886501870 2886510013 2886510010 2886510014 2886504441 AS3002 2' TYPE IA AS3003 3' TYPE IA AS3004 4' TYPE IA AS3006 6' TYPE IA AS3008 8' TYPE IA AS3010 10' TYPE IA 34.99 57.99

More information

Instruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights

Instruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights Instruction Manual Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted

More information

Structural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail. Our ref: JULB2NB Date of issue: March 2017

Structural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail. Our ref: JULB2NB Date of issue: March 2017 Juliet balconies using BALCONY 2 System (Aerofoil) handrail PAGE 1 (ref: JULB2NB280317) Structural Calculations for Juliet balconies using BALCONY 2 System (Aerofoil) handrail Our ref: JULB2NB280317 Date

More information

CR LAURENCE Z-SERIES GLASS CLAMPS (12/14/2012) Page 1 of Dec. 2012

CR LAURENCE Z-SERIES GLASS CLAMPS (12/14/2012) Page 1 of Dec. 2012 CR LAURENCE Z-SERIES GLASS CLAMPS (12/14/2012) Page 1 of 19 Architectural Railing Division C.R.Laurence Co., Inc. 2503 E Vernon Ave. Los Angeles, CA 90058 (T) 800.421.6144 (F) 800.587.7501 www.crlaurence.com

More information

Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0

Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Tools and Supplies Required (not included): Phillips screwdriver 3/8" wrench Drill with 5/32" bit "U" type mounting bracket (i.e., part number

More information

INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR

INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR 1 INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR Nordic Auto Plow LLC is pleased to provide a plow blade that can be used with your Action Trackchair year round. We are not affiliated

More information

C-Lube Linear Way ML Linear Way L ML LWL

C-Lube Linear Way ML Linear Way L ML LWL -Lube Linear ay ML Linear ay L MLLL -Lube Maintenance ree Series -Lube Linear ay ML ML long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber

More information

Specifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7

Specifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7 LR--S7 Tension Meter Load ell 5 to 0 kn TRNSURS igh safe overload rating of 0% max. Mechanical stopper activating against overloads of 1% to 0% ermetically sealed structure with inert gas filled in ighly

More information

C-Lube Linear Way ML ML MLF

C-Lube Linear Way ML ML MLF Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components

More information

Configurations & Parts Identification

Configurations & Parts Identification Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com

More information

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL

FOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all

More information

2D - STRIP ANCHOR LIFTING SYSTEM

2D - STRIP ANCHOR LIFTING SYSTEM 2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL

More information

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic

RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering

More information

DRIFTER PLOW-IN-A-BOX

DRIFTER PLOW-IN-A-BOX DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great

More information

Care Cliner Parts List 1 2 3

Care Cliner Parts List 1 2 3 Page of 7 0500 STR, STL 5" TOTL LOK VRSION, 00550 STR, NYLON 5" TOTL LOK (NO LONGR VILL),, 00560 STR, NYLON 5" IRTNL LOK (NO LONGR VILL) 00560K OSOLT IRTIONL STR RPLMNT KIT VRSION 00575 STR, NYLON 5" TOTL

More information

Technical information CONCRETE / SOLID STONE. Reaction resin mortar, epoxy-acrylate-based with styrene USAGE INSTRUCTIONS

Technical information CONCRETE / SOLID STONE. Reaction resin mortar, epoxy-acrylate-based with styrene USAGE INSTRUCTIONS CONCRETE / SOLID STONE USAGE 1. AREAS OF APPLICATION Heavy load-carrying attachments in solid stone, concrete, porous concrete and light concrete Suitable for attachment points close to the edge, since

More information

product manual H-3220A Benkelman Beam

product manual H-3220A Benkelman Beam 05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel

More information

PR D NT N n TR T F R 6 pr l 8 Th Pr d nt Th h t H h n t n, D D r r. Pr d nt: n J n r f th r d t r v th tr t d rn z t n pr r f th n t d t t. n

PR D NT N n TR T F R 6 pr l 8 Th Pr d nt Th h t H h n t n, D D r r. Pr d nt: n J n r f th r d t r v th tr t d rn z t n pr r f th n t d t t. n R P RT F TH PR D NT N N TR T F R N V R T F NN T V D 0 0 : R PR P R JT..P.. D 2 PR L 8 8 J PR D NT N n TR T F R 6 pr l 8 Th Pr d nt Th h t H h n t n, D.. 20 00 D r r. Pr d nt: n J n r f th r d t r v th

More information

A through-bolt expansion wedge anchor with controlled torque, for use in cracked and non cracked concrete.

A through-bolt expansion wedge anchor with controlled torque, for use in cracked and non cracked concrete. A through-bolt expansion wedge anchor with controlled torque, for use in cracked and non cracked concrete. ETA assessed option 1 anchor. Galvanised carbon steel, with 316 (A4) stainless steel expansion

More information

3.8M C-BAND Rx/Tx ANTENNA SYSTEM

3.8M C-BAND Rx/Tx ANTENNA SYSTEM Revision J May 13, 2002 ASSEMBLY MANUAL 3.8M C-BAND Rx/Tx ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 3.8M C-BAND Rx/Tx ANTENNA SYSTEM J Revised Per ECN#3094 10/7/04 H Revise

More information

Hilti North America Installation Technical Manual Technical Data MI System Version

Hilti North America Installation Technical Manual Technical Data MI System Version MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in

More information

DOCUMENT STATUS: CORE HEALTH & FITNESS, LLC IL-D2002-XXAAX IP,DUAL ADJUSTIBLE PULLEY MATERIAL SEE BOM FINISH N/A N/A SHEET SIZE: B SCALE: 1:33.

DOCUMENT STATUS: CORE HEALTH & FITNESS, LLC IL-D2002-XXAAX IP,DUAL ADJUSTIBLE PULLEY MATERIAL SEE BOM FINISH N/A N/A SHEET SIZE: B SCALE: 1:33. NOTS: RVSON STORY RV T SRPTON O Y //04 RLS OR PROUTON 433 P 34 55 033 OUMNT STTUS: NOT O PROPRTRY NORMTON TS OUMNT SLL NOT RPROU NOR SLL T NORMTON ONTN RN US Y OR SLOS TO OTR XPT S XPRSSLY UTORZ Y OR LT

More information

Flow rates to 590 l/min

Flow rates to 590 l/min LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball

More information

For Customer Service, Rev A - 6/ OF 6

For Customer Service,  Rev A - 6/ OF 6 Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand

More information

SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS

SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SK Series BOX PLOW INSTALLATION & OWNER S MANUAL TABLE OF CONTENTS SAFETY... 2 INTRODUCTIONS... 5 TIPS ON PLOWING SNOW... 6 BOX PLOW ASSEMBLY PROCEDURE... 7 BOX PLOW BLADE ASSEMBLY DRAWING AND PARTS LIST...

More information

Gauge Gauge.119" thick 07 7 Guage.179" thick

Gauge Gauge.119 thick 07 7 Guage.179 thick SQURE STEEL STRIGHT POLES (SSP) Specifications The Square Steel Straight Pole has been successfully installed in projects of all types for over 30 years and has become the most popular and economical pole

More information

Mounting kits for insulation of power transistors

Mounting kits for insulation of power transistors ounting kits for insulation of power transistors tel. 0..6.6.6 www.elitaliaweb.it fax 0.6.6.0.09 info@elitaliaweb.it ST STS ST 0 STS 0 for transistor TO TO TO 0 TO 0 version with mica wafer S with silicone

More information

product manual H-4204 Proving Ring Penetrometer

product manual H-4204 Proving Ring Penetrometer 05.09 product manual H-4204 Proving Ring Penetrometer nnmm Handle Proving Ring Extension Rod Coupler Penetration Rod Cone Figure #1 General Information The Proving Ring Penetrometer is a cone type of penetrometer

More information

SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT

SHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.

More information

7000 SERIES THUMBWHEEL SWITCHES

7000 SERIES THUMBWHEEL SWITCHES 7000 SERIES THUMBWHEEL SWITCHES The combines heavy-duty construction and a compact package size. Designed to meet demanding military performance specifications, the switch features a unique one-piece housing

More information

Mil-Stak PT/2016 PARTS MANUAL

Mil-Stak PT/2016 PARTS MANUAL Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving

More information

NICE-PACK ALCOHOL PREP ROOM PLATFORM CALCULATIONS

NICE-PACK ALCOHOL PREP ROOM PLATFORM CALCULATIONS DESIGN STATEMENT THIS GALVANISED STEEL PLATFORM IS ANALYSED USING THE ALLOWABLE STRESS DESIGN METHOD TO DETERMINE MATERIAL STRENGTH. MEMBER SIZES AND FASTENERS ARE CHOSEN NOT SO MUCH FOR THEIR STRENGTH

More information

Important Instructions

Important Instructions Important Instructions Subject Use With Cabinet Hardmount Trunnion Replacement Cabinet Hardmount 8-60 Pound Washer-Extractors and Kits F77000, F7700, F7700, F7700, F7700, F7700, F9P and F9P WARNING This

More information

PARTS LIST HT300T TOP MOUNT. LIT NO: L939 DATE: June 2008 REVISION: A

PARTS LIST HT300T TOP MOUNT. LIT NO: L939 DATE: June 2008 REVISION: A PARTS LIST HT300T TOP MOUNT LIT NO: L939 DATE: June 2008 REVISION: A HT300T TOP MOUNT PARTS LIST 2a Wingless, weld-on frame bracket, welded alignment Wingless, weld-on frame bracket with QUIK-ALIGN 2c

More information

Ferrite Cores for Induction Welding

Ferrite Cores for Induction Welding 2005 Product Line atalog Ferrites and ssemblies for High Frequency Induction Welding Subsidiary of TT electronics plc Ferrite ores for Induction Welding F59 Typical Performance urves Ferrite Impeder Materials

More information

Ball Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented

Ball Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic

More information

INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN Application:2002 and newer+ Suzuki Eiger 400

INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN Application:2002 and newer+ Suzuki Eiger 400 INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN 63840 Application:2002 and newer+ Suzuki Eiger 400 Your safety, and the safety of others, is very important. To help you make informed

More information

Altazimuth Mount. Altazimuth Mount

Altazimuth Mount. Altazimuth Mount instruction Manual Orion VersaGo II HD Altazimuth Mount #10104 Orion VersaGo II Altazimuth Mount #10105 #10104 #10105 Providing Exceptional Consumer Optical Products Since 1975 OrionTelescopes.com Customer

More information

COMMON BLACK IRON & BLADE PARTS

COMMON BLACK IRON & BLADE PARTS LT RD HD SW PP 0 PP KIT, ALL BLADE LABEL 0 LABEL, BLADE CENTER 0 0 0 0 KIT, LABEL BLACK IRON COVER, HYDRAULICS 0 KIT, COTTER () / R PIN () PLOW PACK KIT, GREASE ZERK ( PACK) CONTROLS / MODULES CONTROL

More information

DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL

DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great

More information

2D - STRIP ANCHOR LIFTING SYSTEM

2D - STRIP ANCHOR LIFTING SYSTEM 2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM alterations reserved Feb-18 Page 1 PRODUCT RANGE LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU SA-TTU 12.5 kn Page 15 Page 20 Page 23 Page 26 SA-TU-HP

More information

Snow Blade Operator s/assembly Instructions

Snow Blade Operator s/assembly Instructions Snow Blade Operator s/assembly Instructions TABLE OF CONTENTS Safety Messages...3 Introduction...4 Preparing for Snow Removal...4 Operating Procedure...5 Operating Controls...5 Tire Chains and Wheel Weights...5

More information

Owner's Manual. for AUTOMATIC LEVEL. NBL Series. FOR CUSTOMER SERVICE, PARTS & REPAIR, CALL Toll Free:

Owner's Manual. for AUTOMATIC LEVEL. NBL Series. FOR CUSTOMER SERVICE, PARTS & REPAIR, CALL Toll Free: Owner's Manual for AUTOMATIC LEVEL NBL Series FOR CUSTOMER SERVICE, PARTS & REPAIR, CALL Toll Free: 1-888-247-1960 1 1. CONTENTS 2. Nomenclature page 3 3. Care and Maintenance page 4 4. Using your Instrument

More information

THE LOSMANDY G-11 MOUNT

THE LOSMANDY G-11 MOUNT Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable

More information

DR REDI-PLOW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No.

DR REDI-PLOW SAFETY & OPERATING INSTRUCTIONS. Original Language. Serial No. Order No. DR REDI-PLOW SAFETY & OPERATING INSTRUCTIONS Serial No. Order No. Original Language DR Power Equipment Toll-free phone: 1-800-DR-OWNER (376-9637) Fax: 1-802-877-1213 Website: www.drpower.com Read and understand

More information

WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.

WARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death. INSTALLATION INSTRUCTIONS Kawasaki Mule Plow Mounting Kit WARN Part Number: 71983 Application: Kawasaki Mule 2002-2006 Your safety, and the safety of others, is very important. To help you make informed

More information

For sunshades using the Zee blades wind loads are reduced by 10 psf.

For sunshades using the Zee blades wind loads are reduced by 10 psf. C.R. Laurence Co., Inc. 2503 East Vernon Los Angeles, CA 90058 24 July 2009 SUBJ: CR LAURENCE UNIVERSAL SUN SHADES The CRL Universal Aluminum Sun Shades were evaluated in accordance with the 2006 International

More information

F AX:

F AX: W e strive to ensure that our produc t s are of the highest quality and free of manufacturing defec t s or missing p ar t s. Howeve r, if you have any problems with your new product, DO NOT RETURN IT T

More information