SECTION 40 Rolled Eye Flails & Flail Knives
|
|
- Carmella Bradley
- 5 years ago
- Views:
Transcription
1 SECTION 40 Rolled Eye Flails & Flail Knives Center Hang Flails Straight Hang Flails Twisted Flails Compost Flails Onion Knives & Onion Tiller Blades Pasture Grooving Blades Feed Wagon Replacement Blades Flail & Cup Knives Knife Mounting Hardware
2 C e n t e r H a n g S t e e l F l a i l PART # LENGTH ( A ) EYE ( B ) MATERIAL ( C ) WEIGHT (LBS.) OEM & PART # (REF. ONLY) 5-1/2 1-1/32 7/ VERMEER # / / / / /4" 1-1/4" 1/4" 1.36 PARMA " 1-1/4" 1/4" 1.45 AGRI FAB 6-1/4 1-5/16 7/ RENN MILL # * 6" 1-1/4" 5/16" " 1-5/16" 5/16" 1.85 LOFTNESS /2" 1-1/4" 5/16" 1.9 FALCAN /16 1-1/4 5/ Tapered Flail # BS A-2 6-9/16 1-1/4 5/ # BS200060A 7" 1-1/4" 1/4" 1.58 ALLOWAY * 7" 1-1/4" 5/16" 2.08 ALLOWAY * 8" 1-1/4" 1/4" 1.7 PARMA OR HAYBUSTER BEETEC * 8" 1-1/4" 5/16" 2.19 HAYBUSTER " 3/4" 5/16" " 1" 5/16" * 8" 1-1/4" 7/16" 2.96 HAYBUSTER * 8" 1-5/16" 5/16" 2.24 HESSTON or LOFTNESS or AGCO /4 5/ " 1-1/4" 5/16" 2.35 HAYBUSTER " 1-1/4" 1/4" " 1-1/4" 5/16" " 1-5/16" 5/16" 2.55 LOFTNESS " 1-1/4" 1/4" 2.09 PARMA * 11" 1-1/4" 5/16" 2.73 PARMA /4" 5/16" 2.85 TUBELINE * INDICATES THE FLAILS THAT ARE USUALLY IN STOCK Most Flails can be ordered with the following suffixes: H = Hard Faced D = Tuff Koat Flails 40-2
3 S t r a i g h t H a n g S t e e l F l a i l PART # LENGTH ( A ) EYE ( B ) MATERIAL ( C ) WEIGHT (LBS.) OEM & PART # (REF. ONLY) * 5" 1" 5/16" 1.55 UNITED PB / / VERMEER # (Rev. Eye) / / VERMEER # (Rev. Eye) /4 1-5/16 1/ RENN MILL/JIFFY " 1-1/4" 5/16" " 1-5/16" 5/16" 1.85 ACE BT-GSO /2 1-1/32 7/ VERMEER #E5377H (Rev. Eye) * 6-1/2" 1" 5/16" 1.68 UNITED PB " 1-1/4" 1/4" 1.53 ALLOWAY " 1-5/16" 1/4" " 1" 5/16" " 13/16" 1/4" 1.58 UNITED PB1504 or ARTSWAY * 8" 13/16" 5/16" 1.9 ARTSWAY * 8" 1" 5/16" 2.12 UNITED PB * 8" 1-1/16" 5/16" 2.13 ARTSWAY " 1-1/4" 5/16" " 1-5/16" 5/16" 2.25 ACE BT-GSO /2" 1-1/4" 1/4" 1.84 ALLOWAY * 9-1/2" 1" 5/16" 2.45 UNITED PB " 1-1/4" 1/4" " 1-5/16" 1/4" / HILBY/NEWHOUSE " 1-1/4" 5/16" 2.84 ACE BT-GSO " 1-5/16" 5/16" 2.85 ACE BT-GSO * INDICATES THE FLAILS THAT ARE USUALLY IN STOCK Most Flails can be ordered with the following suffixes: H = Hard Faced D = Tuff Koat Flails 40-3
4 T wisted Flails OEM & PART # (REF. ONLY) PART # LENGTH ( A ) EYE ( B ) MATERIAL ( C ) WEIGHT (LBS.) Offset Twisted /4 1/ /16 1-5/16 1/ " 1" 1/4" 1.38 DOUBLE L * 10" 1-1/16" 1/4" 2.01 LOCKWOOD Offset Twisted 10-1/2" 1" 1/4" 2.15 DOUBLE L 8-7/8 1-1/4" 1/4" 2.47 PARMA Compost Flails LP & LH WILDCAT RP & RH Description: Compost Mixer Blade. Plain/H.F. Description: Compost Mixer Blade. Plain/H.F. Length: 12-1/2 Width: 4 Material: 1/4 Hole Size(s): (1) 1-1/16 & (1) 11/16 Weight: P=6.67 Lbs. H=6.98 Lbs. Length: 12-1/2 Width: 4 Material: 1/4 Hole Size(s): (1) 1-1/16 & (1) 11/16 Weight: P=6.67 Lbs. H=6.98 Lbs. Left Hand WILDCAT Right Hand P K&W Description: Compost Mixer Blade. Plain Length: 7 Width: 4 Material: 3/8 Hole Size(s): (2) 51/64 for 20mm Bolts Weight: 3.10 Lbs. Left & Right Hand LH & RH Description: Compost Mixer Blade. Hardfaced Length: 7-1/2 Width: 4 Material: 1/2 Hole Size(s): (2) 51/64 for 20mm Bolts Weight: 4.40 Lbs. Left & Right Hand Flails 40-4 K&W LH & RH Description: Compost Mixer Blade. Hardfaced Length: 11-5/8 Width: 4 Material: 3/4 Hole Size(s): (2) 3/4 Bolt Holes Weight: Lbs. Left & Right Hand WILDCAT
5 O n i o n K n i v e s F FALC F FALC Description: Straight cut onion knife. Plain Length: 5-7/8 Width: 3-1/2 Material: 5/16 /8mm Hole Size: 23/40 Part # F410550D for Hard Faced Description: Straight cut onion knife. Plain Length: 3-3/8 Width: 3-1/2 Material: 5/16 /8mm Hole Size: 23/40 Part # F430513D for Hard Faced F FALC F FALC Description: Slant cut onion knife. Plain Length: 6-19/64 Width: 3-1/2 Material: 5/16 /8mm Hole Size: 23/40 Left Hand Part # F430786D for Hard Faced Description: Slant cut onion knife. Plain Length: 6 Width: 3-1/2 Material: 5/16 /8mm Hole Size: 23/40 Right Hand Part # F430787D for Hard Faced O n i o n T i l l e r B l a d e s TV-8.5LP FERGUSON TV-8.5RP FERGUSON Description: Straight cut onion knife. Plain. Length: 8-1/2 Width: 1-1/4 Material: 10mm thick Hole Size: 15/32 Left Hand Description: Straight cut onion knife. Plain. Length: 8-1/2 Width: 1-1/4 Material: 10mm thick Hole Size: 15/32 Right Hand TV-8.5HFL FERGUSON TV-8.5HFR FERGUSON Description: Straight cut onion knife. Hard Faced. Description: Straight cut onion knife. Hard Faced. Length: 8-1/2 Width: 1-1/4 Material: 10mm thick Hole Size: 15/32 Left Hand Length: 8-1/2 Width: 1-1/4 Material: 10mm thick Hole Size: 15/32 Right Hand Flails 40-5
6 Pa s t u r e G r o ov i n g B l a d e s Description: Pasture Grooving Blade. Hard Faced. XPGLH XPGLP XPGLH & XPGLP DIMENSIONS Description: Pasture Grooving Blade. Plain. Length: 7 Width: 5 Material: 3/8 thick Hole Size: 11/16 Left Hand Description: Pasture Grooving Blade. Hard Faced. Length: 7 Width: 5 Material: 3/8 thick Hole Size: 11/16 Right Hand XPGRH Length: 7 Width: 5 Material: 3/8 thick Hole Size: 11/16 Left Hand Description: Pasture Grooving Blade. Plain. Length: 7 Width: 5 Material: 3/8 thick Hole Size: 11/16 Right Hand XPGRP XPGRH & XPGRP DIMENSIONS F e e d Wa g o n R e p l a c e m e n t B l a d e s XPKIRBY Description: Replacement Blade. for KIRBY Feed Wagons ALL NORWEST STEEL FLAILS ARE (approximations) ❶ Length: 5-1/4 ❷ Width: 2-27/32 ❸ Height: 6-19/32 ❷ ❸ FULLY HEAT TREATED FOR EXTRA STRENGTH & LONG WEAR. ALL FLAILS ARE MANUFACTURED Material: 3.5mm Hole Size: 11/32 ❶ WITH 2 WIDE MATERIAL. XPWATTS Description: Replacement Blade. for WATTS Feed Wagons MINIMUM ORDER is 250 for OBSOLETE and (approximations) ❶ Length: 5-1/4 ❷ Width: 2-27/32 ❸ Hole Centers: 2-1/64 Material: 3.5mm Hole Size: 11/32 ❷ ❸ LOW VOLUME parts. CUSTOM KNIVES CAN BE MADE IF NEEDED. OTHER FLAIL SIZES AVAILABLE UPON REQUEST. ❶ PLEASE CALL NORWEST FOR A QUOTE. Flails 40-6
7 4-7/8 2-3/4 F l a i l K n i v e s *Knives may be ordered with the following suffixes: P = Plain, H = Hard Faced, D = Tuff -Koat P DANDL P IHC 2-1/2 1-15/16 DANDL (R2560) 7/ (1/2 ) D-RING DANDL (SA2021) (1-1/4 ) OVAL RING DANDL (SA2016-1HD) U-BAR DANDL (SA2016-1HD) D-RING (REARS ONLY) 5-3/8 6-1/8 INTERNATIONAL HARVESTER (491096R1) 8-7/8 9-3/4 3/16 1/ P DANDL P ALLOWAY DANDL (SA2027) VRISIMO (CD2100 REARS (FL960) 2 5/8 ALLOWAY ( ) 2 5/ (1/2 ) D-RING DANDL (S2021) (1-1/4 ) OVAL RING DANDL (S2047) U-BAR (REARS ONLY) D-RING (REARS ONLY) 3-9/ D-RING U-BAR ALLOWAY ( ) 6-1/ /16 1/ P DANDL P FULL CUT TIGER 2 1-3/4 DANDL (SA2039) D-RING DANDL (S2021) U-BAR DANDL (SA2016-HD) VRISIMO (MIGHTY MAX) CD /4 5/8 6-9/16 TIGER (TF1019) CLEVIS (TF1020) NUT & BOLT (TF10213) 9/16 x 1 3/16 1/8 Flails 40-7
8 3-5/16 F l a i l K n i v e s *Knives may be ordered with the following suffixes: P = Plain, H = Hard Faced, D = Tuff -Koat P DANDL P STD. MOTT CUP KNIFE DANDL (2042) DEERE (E31900) FLORY VRISIMO (CD2135) MIGHTY MAX (7/16 ) D-RING Dandl(2017), JD(E31903), Flory(MR6002),Vrisimo(CD2135) (1/2 ) D-RING Dandl(SA2021) (1-1/4 ) OVAL RING Dandl(SA2047), Vrisimo(CD2120) (1-1/2 ) OVAL RING Dandl(SA2111), Flory(MR6001) 9/16 x 3/4 2-3/8 1/8 Material 3-3/8 DANDL (IA2016) MOTT ( (SHACKLE & PIN) OR (BOLT & NUT) P MATHEWS P HEAVY MOTT 1-9/16 1-3/4 9/16 x 1 3-3/8 MATHEWS (15208) SERVIS-RHINO 3/16 3/8 4-1/8 9/16 x 1 3-1/2 CARRIAGE BOLT & NUT P FULL CUT EDWARDS P LOFTNESS 3/8 EDWARDS (HMB217-IF) 3 1-3/4 9/16 x /16 *FORMERLY P LOFTNESS (8136, ) LOFTNESS (5986 OLD STYLE) VRISIMO (CD2185) REARS (FL 8021) LOFTNESS (8020 NEW STYLE) 5-3/4 2-1/2 15/16 6-3/4 1/ SLOTTED BAR VRISIMO (CD 2165) VRISIMO(CD2175) BUSHING 5/16 Flails 40-8
9 4-1/4 3-1/4 F l a i l K n i v e s *Knives may be ordered with the following suffixes: P = Plain, H = Hard Faced, D = Tuff -Koat P LIGHT DUTY EDWARDS P EDWARDS 1-3/4 1-3/4 EDWARDS (HMB-217) 9/16 x 1 4-1/4 EDWARDS (HMB-217-1) 9/16 x 1 3-3/8 5/32 1/ P DEERE LP & RP MATHEWS *FORMERLY P DEERE (P60322, P58586, & E48308) BALZAR (24153) BRENT ( ) LOFTNESS (S330050V) UFT ( ) MIGHTY MAX D-RING DEERE (E48307) LOFTNESS (S330070V) U-BAR DEERE (E48305) 2-1/2 5/16 3/4 5-5/8 MATHEWS ( L/H) MATHEWS ( R/H) RHINO SERVIS CARRIAGE BOLT & NUT 3/16 3/8 4-1/ P FOX BRADY FOX BRADY (65143) BLAZER (12357) BUFFALO ( ) SHULTZ-MASSEY (180) OLD CASE, HINIKER ( ) 5/8 1-5/ D-RING FOX BRADY (65142), BALZER (12356),Buffalo ( ) U-BAR FOX BRADY (65141), BALZER (12355),Buffalo ( ) U-BAR FOX BRADY (1904 Old Style) 1/4 5-7/8 Phone: (208) Fax: (208) Flails 40-9
10 F l a i l K n i f e M o u n t i n g H a r d wa r e D - R I N G S, B U S H I N G S, & U - B A R S D-RING D-RING D-RING D-RING D-RING D-RING Flails 40-10
11 F l a i l K n i f e M o u n t i n g H a r d wa r e D - R I N G S, B U S H I N G S, & U - B A R S D-RING (1-1/4 ) OVAL RING HANGER (1-1/2 ) OVAL RING HANGER U-BAR U-BAR U-BAR.125 gauge Flails 40-11
12 F l a i l K n i f e M o u n t i n g H a r d wa r e D - R I N G S, B U S H I N G S, & U - B A R S U-BAR U-BAR U-BAR U-BAR.25 gauge 2-1/ U-BAR F.Y.I. Not all items in stock. Please Call Norwest for Pricing and Availability. Measurements are Approximate and for Reference purposes. (208) Flails 40-12
3519 State Rte Corning Road. South New Berlin, Elmira, NY NY p p
WINTER CATALOG SUPERIOR QUALITY. HEADQUARTERS PO Box 527 PENNSYLVANIA OSWEGO TOOL AND STEEL S. NEW BERLIN 3519 State Rte. 8 2420 Corning Road 102 Creek Road 5183 State Rte.104 South New Berlin, Elmira,
More informationA.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual
70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL
More informationA.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual
70 38TH AVE W PO BOX 57 SPENCER, IA 530 PHONE: 7-6-49 FAX: 7-6-048 SERVICE: 800-84- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. 5 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER
More information6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW
Price quote for: 6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More informationSnow Removal & Road Maintenance Products
Snow Removal & Road Maintenance Products Introducing Kennametal I.C.E.-Series Isolated Carbide-Edged s engineered specifically to last exceptionally long in even the most challenging road conditions! I.C.E.
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationMOTOR GRADER & SNOW PLOW B LADES
MICHAEL TODD & COMPANY, INC. MOTOR GRADER BLADES Michael Todd & Co., Inc. offers a full line of cutting edges for motor graders. Part No. Size Hole Spacing Bolts Required 58X6X5 5 8 x 6 x 5ft 12 7 MOTOR
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationCLIPPER SCREEN SIZES - DECEMBER 28, 2005
PERFORATED METAL ROUND HOLE FRACTIONS HOLE SIZE HOLE SIZE IN HOLE SIZE TOLERANCE STANDARD OR ( INCH ) IN 64TH THOUSANDS IN MM THOUSAND ADD ON PRICE 1/25 2.56.040 1.01 + 0 -.003 STANDARD 1/24 2.67.041 1.05
More informationCV3000 Series. Characterized Insert Control Valves
CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut
More informationSTANDARDISED MOUNTINGS
STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low
More informationSnow Blade Operator s/assembly Instructions
Snow Blade Operator s/assembly Instructions TABLE OF CONTENTS Safety Messages...3 Introduction...4 Preparing for Snow Removal...4 Operating Procedure...5 Operating Controls...5 Tire Chains and Wheel Weights...5
More informationTHREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)
CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5
More informationDitchWitch Trenchers. R e p l a c e m e n t P a r t s f o r. Chains. Cutting Teeth. Sprockets. Bearings. Carbide Teeth
R e p l a c e m e n t P a r t s f o r DitchWitch Trenchers Chains Cutting Teeth Sprockets Bearings Carbide Teeth Anoka, Minnesota Atlanta, Georgia Ontario, California Centralized Customer Service: 800/38-44
More information9: COTTER PINS 9: COTTER PINS COTTER PINS COTTER PINS /6" COTTER PINS 9-000 9-00 9-00 9-003 9-00 9-006 /6 X / /6 X 3/ /6 X /6 X - /6 X -/ /6 X 0 0 0 0 0 0 /6" COTTER PINS 9-08 9-0 /6 X /6 X 0 0 " COTTER
More informationDry System (Twin and DR Type Bearings) Lubricated System (Twin Type Bearings) Lubricated System (DR Type Bearings)
This data sheet interacts with PRT2 Catalogue 54-56 Hepcootion No. 3 Load Life Information The load capacity and life expectancy of Hepcootion ring slides, segments and track systems is determined by many
More informationWausau WW2452. R.H. snow plow, Make & Model. Nose height 24" Discharge height 52" Plow throat depth from vertical to deepest point 20"
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Wausau WW2452 Nose height 24" Discharge height 52" Plow throat depth from vertical to deepest point 20" Plowing angle 45-55-60 Degree
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More informationMil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
More informationDIM. A (+ 0,05 0,51) .135 ±.015 (3,43 ± 0,38) COMMON LUG INTEGRAL ASSEMBLY NUT, DO NOT REMOVE 1/4-32 UNEF-2A THREAD
Multi-Deck SERIES 0 SERIES 0 0." Diameter, / Amp, Standard, Military SR FEATURES Proven Quality in Thousands of Applications Gold-plated Contact System 0,,, 0 and 0 Angle Options MIL Qualified Versions
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More informationTOTAL PRICE: See Schedule 6.0-1
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Falls One way Plows Nose height 30 Discharge height 60 Plow throat depth from vertical to deepest point 24 Plowing angle 33 Moldboard
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationFor Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
More informationXR Series. Introduction. Design Features. Availability. Applications
Kaydon Bearings Slewing Ring Bearings Catalog 390 Introduction The consists of Kaydon cross roller bearings. They provide a high degree of stiffness and low rotational torque within a minimal envelope.
More informationFOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationCat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity.
Cat Multi-Processors Hydraulic Excavators Maximum Productivity Big challenges are reduced to small pieces, thanks to high cutting and crushing forces generated by the cross-mounted cylinder. High productivity
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More information(b) For the change in c 1, use the row corresponding to x 1. The new Row 0 is therefore: 5 + 6
Chapter Review Solutions. Write the LP in normal form, and the optimal tableau is given in the text (to the right): x x x rhs y y 8 y 5 x x x s s s rhs / 5/ 7/ 9 / / 5/ / / / (a) For the dual, just go
More informationGATES BIC & RAILING SOVEREIGN RANGE. BURBAGE IRON CRAFT LTD
SOVEREIGN RANGE GATES & BIC www.burbageironcraft.co.uk BURBAGE IRON CRAFT LTD STIRLING STIRLING SPECIFICATIONS Solid steel construction Frames - Single, Tall Single, Bow Top and Railing 25mm x 6mm. Gates
More informationBOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
More informationFOREMAN ASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More informationBimetal Industrial Thermometers
Bimetal Industrial Thermometers 00 Order Number Description XX XX XX X XX XX Case Style Material Size Bushing Example: RG50-R translates to: R = Rear Mounting = 3" dial 50 = 1 2" NPT connection R = With
More information7 Revised AM001 Rev. 01/17
Spare Parts Price Book The Spare Parts Price Book will be used for procuring replacement parts under WMATA s micro purchasing method. While the Spare Parts Price Book is a mandatory submission for your
More informationTile Master XL Plus TM1-XLHT. Spare Parts. Piezas de repuesto. Pieces de rechange TILE MASTER XL PLUS. IPL, Tile Master XL Plus, ,
IPL, Tile Master XL Plus, 2005-23, 542 20 10-53 Tile Master XL Plus TM1-XLHT Spare Parts Piezas de repuesto Pieces de rechange TILE MASTER XL PLUS 542 20 10-53 PART NO. POS. DESCRIPTION PART NO. POS. DESCRIPTION
More informationSuper Tilematic G2 STM G2 STM 10100SS G2. Spare Parts. Piezas de repuesto. Pieces de rechange SUPER TILEMATIC G2
IPL, Super Tilematic G2, 2005-23, 542 20 10-51 Super Tilematic G2 STM 10100 G2 STM 10100SS G2 Spare Parts Piezas de repuesto Pieces de rechange SUPER TILEMATIC G2 542 20 10-51 PART NO. POS. DESCRIPTION
More informationGENUINE REPLACEMENT PARTS
GENUINE REPLACEMENT PARTS SUSPENSION COMPONENTS - APPLICABLE TO ALL MARKETS REPLACEMENT SUSPE FOR ROLLS-ROYCE & B - Rolls-Royce FRONT SUSPENSION COMPONENTS REAR SUSPENSION COMPONENTS CHASSIS/VIN APPROXIMATE
More informationGC005 thru GC600. Wireless Load Cell. Features. Applications. General Description. Load Cell
Wireless Load Cell Features Standard single part line pull sizes ranging from 5,000 to 600,000 lb. All stainless frame and hardware Heavy duty construction from 17-4PH1150 stainless steel (17-4PH1025 on
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationBlue Comet REV
-028-1 Blue Comet -6-2 REV.01101 Boiler Parts 1.) Shell ( blue & gray ) FB-1100055 *10.00 ( boiler )( # 8 ) 2.) Cab ( blue & dark blue ) FB-1100056 *0.00 ( # 8 ).) Handrail ( right )( nickel ) FB-111001
More informationRYOBI 10 in. TABLE SAW MODEL NUMBER BTS21
0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE
More informationATV WP2 FRONT MOUNT PUSH TUBE
ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle
More informationPV-250 Line Relay. I UNION SWITCH & SIGNAL l[fill. Service Manual 4574-L. Installation, Operation and Maintenance. An Ansaldo Signal Company
I UNION SWITCH & SIGNAL l[fill 65 Russell Street Batesburg, SC 29006 Service Manual 57-L PV-250 Line Relay 115 Volts, 60 Cycles N322555-008) Installation, Operation and Maintenance March, 1985 A-3/85-2293-50-1
More informationPOWER PUSHER Snowplow
May 15, 2013 Lit. No. 43682, Rev. 00 POWER PUSHER Snowplow 8' 72040; 10' 72045; Box Plow for Skid-Steer Loaders Owner's Manual and Installation Instructions Original Instructions CAUTION Read this manual
More informationUniclass L4181. EPIC D181 CI/SfB. 11th edition
Uniclass L4181 EPIC D181 CI/SfB (31.59) Xt7 11th edition recess leather cabinet handles recess leather cabinet handles CNC machined solid brass recessed with flush fitted bonded bridle leather Custom lengths
More informationUSRA Steam Engine
USRA Steam Engine --- 0-5- 0-5-0 0-57- 0-57-0 USRA --- Steam Engine (top section) Engine Parts.) Shell (Pennsylvania)(# 7) FB-00 *5.00 ( Brunswick green, Tuscan red & graphite ) ( gold numbers ).) Shell
More informationG1033Z Replacement Parts
GZ Replacement Parts PZ0 MOTOR PULLEY - PSS0M SET SCREW M- X PVM V-BELT M- L0 PZ0 SWITCH BRACKET PZ0 MAGNETIC SWITCH MA-0 PZ0 STRAIN RELIEF MGA PZ0 MOTOR CORD AWG X C PZ PLASTIC SWITCH CVR SCREW P HOLE
More informationASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationPart No. Part Name Spec.
NPR50A_pl160513 NP50A / NR50A (*Include ) 2016/5/13 Title Part Part Name Spec. 1 1 1.BASE W083 HEX SOCKET HEAD CAP SCREW M8 25 2 Y Y Y: YES 1 2 1.BASE PM62 REAR GRIP 1 N N N: NO 1 3 1.BASE W051 HEX SOCKET
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationOwners manual. Sears PLOW MODEL NO CAUTION: Read Rules for Safe Operation and Instructions Carefully
Sears Owners manual PLOW MODEL NO. 917.253010 CAUTION: Read Rules for Safe Operation and Instructions Carefully Assembly Operating Maintenance Repair Parts SEARS, ROEBUCK AND CO. U.S.A. SIMPSONS-SEARS
More informationPARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
More informationBEARINGS Pillow Blocks
The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static
More information1.105 Solid Mechanics Laboratory Fall 2003 Experiment 3 The Tension Test
1.105 Solid Mechanics Laboratory Fall 2003 Experiment 3 The Tension Test Our objective is to measure the Elastic Modulus of steel. The experiment comes in two parts. In the first, you will subject a steel
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches
More informationSNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
More informationCATALOGUE. Visit our website at airmastersigns.com to see a complete and up to date listing of all our sign products.
CATALOGUE N E E D A C U S T O M O R D E R? C A L L U S AT 1-8 0 0-7 8 8-6 8 0 5 O R I N W I N N I P E G 2 0 4-9 4 4-7 4 4 6 O R E M A I L U S A T S I G N S @ A I R M A S T E R S A L E S. C O M T O D I
More informationINTRODUCING HORIZONTAL
i n t r o d u c t i o n. INTRODUCING HORIZONTAL A W I D E R A N G E O F PA N E L S, S YS T E M C O M P O N E N T S A N D A C C E S S O R I E S TO C O M B I N E F O R A W E L L D E S I G N E D S E L L I
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:
More informationINSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More information2.4M SERIES 1241 ANTENNA
4096-859 Revision D April 19, 2016 2.4M SERIES 1241 ANTENNA General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com General Dynamics Page 1 4/19/2016
More informationPrescription Total. Frame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14
Effective 15/05/2018 Company: Account Number: Date: q Quote q PO Number: RTS: Marked For: Focus CR 2309 300 lb weight capacity. Tilt range: -5º anterior to 50º posterior. Frame Width Address: 19C Ballinderry
More informationHEAVY DUTY SWING-OUT VALVE
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationConversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs
ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion
More informationSNOWPLOW ACCESSORIES. Factory Original Parts
Factory Original Parts Your WESTERN snowplow is a valuable investment. The best way to assure original equipment reliability and efficiency is to purchase only genuine Western Factory Original parts and
More informationFiberglass, Resin, Lava Stone
Fiberglass, Resin, Lava Stone Tough, Versatile, Maintenance Free, and Light Weight Welcome to City Planter s catalogue! We strive to carry garden planters in a variety of shapes, sizes, materials and aesthetics.
More information0.016 W/ C to +150 C
MJF00 (NPN), MJF0 (PNP) Complementary Power Transistors For Isolated Package Applications Designed for general purpose amplifier and switching applications, where the mounting surface of the device is
More informationMODULAR AND CUSTOM EXHIBIT SOLUTIONS
2018 MODULAR AND CUSTOM EXHIBIT SOLUTIONS KLIK MAGNETIC DISPLAYS Crown Molding Finish off any pillow case box shape with our crown molding for a tight, architectural look. Artwork Framed artwork or just
More informationTHE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
More information/2" Heavy Duty Swing-Out
Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible
More informationIPL,TS 250X, , TS 250X TS 250X SS. Spare parts Pieces de rechange Piezas de repuesto HUSQVARNA CONSTRUCTION PRODUCTS
IPL,TS 250X, 2006-28, 524 20 11-00 TS 250X TS 250X SS Spare parts Pieces de rechange Piezas de repuesto 542 20 11-00 HUSQVARNA CONSTRUCTION PRODUCTS TS 250X PART NO. POS. DESCRIPTION PART NO. POS. DESCRIPTION
More informationTS 250XL TS 250XL SS. Spare parts Pieces de rechange Piezas de repuesto IPL,TS 250XL, , HUSQVARNA CONSTRUCTION PRODUCTS
IPL,TS 250XL, 2006-28, 524 20 11-02 TS 250XL TS 250XL SS Spare parts Pieces de rechange Piezas de repuesto 542 20 11-02 HUSQVARNA CONSTRUCTION PRODUCTS TS 250XL PART NO. POS. DESCRIPTION PART NO. POS.
More informationq Icon TM Backs (Low, Mid, Tall, Deep ) $ q Evolution TM Backs (Regular, Tall, Deep ) $
Distributed in Canada by 49 Bespoke, Inc. 51 Caldari Road, Units 6-7B Concord, ON L4K 4G3 Phone: (866) 827-4548 Fax: (877) 731-7745 sales@kimobility.ca www.kimobilty.ca Company: Account Number: Date: q
More informationSection 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA
Section 12. EC s PHYSICAL DIMENSIONS NUMBER TYPE A B C & F D E S T *-43517-EC *-44119-EC *-45224-EC *-47035-EC (EC35) (EC41) (EC52) (EC70) MAGNETIC DATA in. 1.358 ±.030.681 ±.006.374 ±.012.469.8955 ±.020.108
More informationConfigurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
More informationFORK-MOUNTED SNOW PLOW, MODEL SPB-N-72 INSTRUCTION MANUAL
VESTIL MANUFACTURING CORP. 2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868 Fax: (260) 665-1339 www.vestilmfg.com e-mail: sales@vestil.com
More information55% OFF CARBIDE HIGH SPEED STEEL COBALT. Phone: (616) Toll-Free: Fax: (616) cbdekorne.com
CARBIDE HIGH SPEED STEEL COBALT Phone: () - Toll-Free: -00--0 Fax: () - cbdekorne.com PLEASE TAKE % OFF PRINTED S END MICRO END THREAD COUNTER SINKS CHAMFER DRILL TAPS & DIES OUR COMMITMENT TO YOU...
More information210H-3 HA 289 HA H-3. f80 f160. f140. f125. f50. Type. Standard type. Adaptable fluid. Seal material. Phosphate ester fluid. Water in oil fluid
288 28 Type Nominal pressure Maximum allowable pressure roof test pressure Minimum operating pressure orking speed range orking temperature range (ambient/fluid temperature) Structure of cushioning Adaptable
More informationPARTS MANUAL 2017 DEFOLIATOR 8R22/6R TH Avenue North Fargo, ND Phone: (701) Fax: (701)
PARTS MANUAL 0 DEFOLIATOR R/R0 00 TH Avenue North Fargo, ND 0 Phone: (0) - Fax: (0) - www.amitytech.com MPDE TABLE OF CONTENTS HITCH ASSEMBLY..- FRAME HARDWARE. - DRIVE TRAIN - # FLAILS.. - # FLAILS..
More informationBushing Part No. XTB15 XTB20 XTB25 XTB30 XTB35 XTB40 XTB45 XTB50. Wt lbs XTB60 XTB XTB80 XTB
T s STOCK T BUSHINGS Part No. Stock Bores Keyseat Key Supplied TB / *, / *, / * *, /*, /*, *, /*, /* / / / / / / x / x / TB0, /, /, /, /*, * / / / x / / / / / x / x / TB, /, /,/, /, / /,, / /* / x / /
More information100Z-1 100Z-1 51 HA 50. Cushion ring Cushion ring. Type. Standard type. Switch Set
0Z-1 0Z-1 51 Type Nominal pressure Maximum allowable pressure Proof test pressure Minimum operating pressure Working speed range Working temperature range (ambient/fluid temperature) Structure of cushioning
More informationSingle Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
More informationLOW PROFILE TRANSFERS
LOW PROFILE TRANSFERS PARTS CATALOG 1 INDUSTRIAL DRIVE PO BOX 0 SWIFT CURRENT, SASKATCHEWAN, CANADA SH 0L0 PHONE:.66. (NORTH AMERICA) FAX: 06.. WEBSITE: HTTP://WWW.BATCOMFG.COM EMAIL: SALES@BATCO-REM.COM
More informationFrame Width. Seating Setup. q 16 q 15 q 14 q 17 q 16 q 15 q 14 Short q 18 q 17 q 16 q 15 q 14 q 19 q 18 q 17 q 16 q 15 q 14
Australian Importer: Paragon Mobility Phone 1300 652 382 Email orders@paragonmobility.com.au www.paragonmobility.com.au Company: Account Number: Date: q Quote q PO Number: RTS: Marked For: Focus CR E1161
More informationSample and Bleed Valves
Pure-Flo Sample and Bleed Valves www.ittpureflo.com Application The Pure-Flo product line of Sample and Bleed Valves provides compact and economical means to extract process samples and bleed off excess
More informationPARTS LIST GAS BOILERS MODELS:
PARTS LIST GAS BOILERS MODELS: CG214 (E) CG314 (E) CG414 (E) CG220 (E) CG320 (E) CG325 (E) CG330 (E) southbend A MIDDLEBY COMPANY 1100 Old Honeycutt Fuquay-Varina, NC 27526 (919) 552-9161 FAX (919) 552-9798
More informationFAST CHECK THICKNESS GAGE
FAST CHECK THICKNESS GAGE Recommended for quick thickness checks of flat sheet materials and wide variety of small parts. Supplied with hardened steel gaging contacts, lifting levers, and clockwise continuous
More informationBARNHART BOLT - Late Model Okuma & Hurco CNC Machinery
Asset Sales, Inc. BARNHART BOLT - Late Model Okuma & Hurco CNC Machinery (5) Okuma CNC Turning Centers new as 2011, Hurco CNC VMC, mfg.2014, Mori Seiki HD Engine Lathe, Alliant Var. Speed Knee Mill, Plus
More information6.0 EC-SERIES CUBERS EC200-EC300-EC400-EC500-EC606 AIR, WATER AND REMOTE
6.0 EC-SERIES CUBERS EC200-EC300-EC400-EC500-EC606 AIR, WATER AND REMOTE Item EC EC EC EC EC EC Code Part Description Part Number GRP 200 300 400 406 500 606 AIR COOLED 5 Air Condenser 9141048-01 AC X
More informationService Information Letter SIL # 017
Service Information Letter SIL # 017 Trunnion Adjustment - Double Barrels Only Equipment: Double Barrels With Sloped Trunnions Date Issued: 9-24-03 Additional Reference: SIL # 016 Revised: Revision #:
More informationCipriani Harrison Valves Corp.
Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle
More informationFerrite Cores for Induction Welding
2005 Product Line atalog Ferrites and ssemblies for High Frequency Induction Welding Subsidiary of TT electronics plc Ferrite ores for Induction Welding F59 Typical Performance urves Ferrite Impeder Materials
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 TRI-STATE INSTRUMENT SERVICE, INC. 3024 Wayne Trace Ft. Wayne, IN 46806 Lynn A. Stroble Phone: 260 456 4545 CALIBRATION Valid To: September
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS Kawasaki Mule Plow Mounting Kit WARN Part Number: 71983 Application: Kawasaki Mule 2002-2006 Your safety, and the safety of others, is very important. To help you make informed
More informationRGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails
on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,
More information3.8M C-BAND Rx/Tx ANTENNA SYSTEM
Revision J May 13, 2002 ASSEMBLY MANUAL 3.8M C-BAND Rx/Tx ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 3.8M C-BAND Rx/Tx ANTENNA SYSTEM J Revised Per ECN#3094 10/7/04 H Revise
More informationRGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails
RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL Lasheila Hayes Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL 35096 Lasheila Hayes Phone: 205 505 0296 CALIBRATION Valid to: April 30, 2019 Certificate Number:
More information