KA79XX/KA79XXA. 3-Terminal 1A Negative Voltage Regulator. Features. Description. Internal Block Digram.
|
|
- Leo Manning
- 5 years ago
- Views:
Transcription
1 3-Terminal 1A Negative oltage Regulator Features Output Current in Excess of 1A s of -5, -6, -8, -9, -10, -12, -15, -18, -24 Internal Thermal Overload Protection Short Circuit Protection Output Transistor Safe Operating Area Compensation Description The KA79XX/KA79XXA series of three-terminal negative regulators are available in TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shutdown and safe operating area protection, making it essentially indestructible. TO-220 in 1 1. GND 2. Input 3. Output Internal Block Digram GND R1 OLTAGE REFERENCE R2 + - Q1 Q2 Output I1 I2 PROTECTION CIRCUITRY Rsc In Input Rev Fairchild Semiconductor Corporation
2 Absolute Maximum Ratings Parameter Symbol alue Unit Input oltage I -35 Thermal Resistance Junction-Case (1) RθJC 5 C/W Thermal Resistance Junction-Air (1, 2) RθJA 65 C/W Operating Temperature Range TOPR 0 ~ +125 C Storage Temperature Range TSTG - 65 ~ +150 C : 1. Thermal resistance test board Size: 76.2mm * 114.3mm * 1.6mm(1S0P) JEDEC standard: JESD51-3, JESD Assume no ambient airflow Electrical Characteristics (KA7905) (I = -10, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -7 to -20 Line Regulation (3) O TJ = +25 C I = -7 to I = -8 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (3) O TJ =+25 C, IO = 250 to Quiescent Current IQ TJ =+25 C I = -8 to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA = +25 C µ Dropout oltage D TJ =+25 C, IO = 1A Short Circuit Current ISC TJ =+25 C, I = Peak Current IPK TJ =+25 C A 3. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 2
3 Electrical Characteristics (KA7906) (Continued) (I = -11, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO = 1µF, unless otherwise specified.) TJ =+25 C O IO = 5 to 1A, PO 15W I = -9 to -21 Line Regulation (1) O TJ = +25 C I = -8 to I = -9 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C, IO = 250 to Quiescent Current IQ TJ = +25 C I = -8 to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA =+25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 3
4 Electrical Characteristics (KA7908) (Continued) (I = -14, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ =+25 C O IO = 5 to 1A, PO 15W I = -10 to -23 Line Regulation (1) O TJ = +25 C I = to I = -11 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C, IO = 250 to Quiescent Current IQ TJ = +25 C I = to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA = +25 C µ Dropout oltage D TJ =+25 C, IO = 1A Short Circuit Current ISC TJ =+25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 4
5 Electrical Characteristics (KA7909) (Continued) (I = -15, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -1.5 to -23 Line Regulation (1) O TJ =+25 C I = to I = -12 to TJ =+25 C, IO = 5 to 1.5A Load Regulation (1) O TJ =+25 C, IO = 250 to Quiescent Current IQ TJ = +25 C I = to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA = +25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 5
6 Electrical Characteristics (KA7910) (Continued) (I = -17, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -12 to -28 Line Regulation (1) O TJ = +25 C I = to I = -14 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C, IO = 250 to Quiescent Current IQ TJ = +25 C I = to Temperature Coefficient of O o/ T IO = / C Output Noise oltage N 10Hz f 100kHz, TA = +25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 6
7 Electrical Characteristics (KA7912) (Continued) (I = -19, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = to -27 Line Regulation (1) O TJ = +25 C I = to I = -16 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ =+25 C, IO = 250 to Quiescent Current IQ TJ =+25 C I = to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA =+25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 7
8 Electrical Characteristics (KA7915) (Continued) (I = -23, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -18 to -30 Line Regulation (1) O TJ = +25 C I = to I = -20 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ =+25 C, IO = 250 to Quiescent Current IQ TJ =+25 C I = to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA = +25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 8
9 Electrical Characteristics (KA7918) (Continued) (I = -27, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = to -33 Line Regulation (1) O TJ = +25 C I = -21 to I = -24 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C, IO = 250 to Quiescent Current IQ TJ = +25 C I = -21 to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA = +25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ =+25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 9
10 Electrical Characteristics (KA7924) (Continued) (I = -33, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -27 to -38 Line Regulation (1) O TJ =+25 C I = -27 to I = -30 to TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C, IO = 250 to Quiescent Current IQ TJ = +25 C I = -27 to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA =+25 C µ Dropout oltage D TJ =+25 C, IO = 1A Short Circuit Current ISC TJ =+25 C, I = Peak Current IPK TJ =+25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 10
11 Electrical Characteristics (KA7905A) (Continued) (I = -10, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -7 to -20 Line Regulation (1) O TJ = +25 C I = -7 to -20 IO = 1A I = -8 to -12 IO = 1A I = -7.5 to I = -8 to -12, IO=1A IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C TJ =+25 C, IO = 250 to Quiescent Current IQ TJ =+25 C I = -8 to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA =+25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ = +25 C, I = Peak Current IPK TJ = +25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 11
12 Electrical Characteristics (KA7912A) (Continued) (I = -19, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ =+25 C O IO = 5 to 1A, PO 15W I = to -27 Line Regulation (1) O TJ = +25 C I = to -27 Io = 1A I= -16 to -22 Io = 1A I = to I = -16 to -22, Io = 1A TJ =+25 C, IO = 5 to 1.5A Load Regulation (1) O TJ =+25 C, IO = 250 to Quiescent Current IQ TJ =+25 C I = -15 to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA =+25 C µ Dropout oltage D TJ =+25 C, IO = 1A Short Circuit Current ISC TJ =+25 C, I = Peak Current IPK TJ =+25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 12
13 Electrical Characteristics (KA7915A) (Continued) (I = -23, IO = 500, 0 C TJ +125 C, CI =2.2µF, CO =1µF, unless otherwise specified.) TJ = +25 C O IO = 5 to 1A, PO 15W I = -18 to -30 Line Regulation (1) O TJ =+25 C I = to -30 Io = 1A I = -20 to -26 Io = 1A I = to I = -20 to -26, Io = 1A TJ = +25 C, IO = 5 to 1.5A Load Regulation (1) O TJ = +25 C, IO = 250 to Quiescent Current IQ TJ =+25 C I = to Temperature Coefficient of D o/ T IO = / C Output Noise oltage N f = 10Hz to 100kHz, TA =+25 C µ Dropout oltage D TJ = +25 C, IO = 1A Short Circuit Current ISC TJ =+25 C, I = Peak Current IPK TJ =+25 C A 1. Load and line regulation are specified at constant junction temperature. Changes in O due to heating effects must be taken 13
14 Typical Performance Characteristics Ou tp ut [-] o lta ge [- 4.9 ] in=10 Io=40 in=25 Io= TA, Ambient Temperature [ o C] 5 Load Regulation[] Lo ad 11 Re 9 gul 7 ati 5 on 3 [m 1 ] Io=1.5A Io=0.75A TA, Ambient Temperature [ o C] Figure 1. Figure 2. Load Regulation Quiescent Current [] TA, Ambient Temperature [ o C] D t lt [] Dropout oltage [] Io=1A TA, Ambient Temperature [ o C] Figure 3. Quiescent Current Figure 4. Dropout oltage Short Circuit Current[A] Sh 0.5 ort 0.45 Cir 0.4 cui t 0.25 Cu 0.2 rre0.15 nt 0.1 [A] TA, Ambient Temperature [ o C] Figure 5. Short Circuit Current 14
15 Typical Applications Input 2.2uF + + CI KA79XX 1uF Co Output Figure 6. Negative Fixed output regulator KA C uF 2 Co + 1uF 1N4001 * GND -15 C uF 1uF Co KA N4001 * -12 Figure 7. Split power supply ( ± 12/1A) : (1) To specify an output voltage, substitute voltage value for "XX " (2) Required for stability. For value given, capacitor must be solid tantalum. If aluminium electronics are used, at least ten times value shown should be selected. CI is required if regulator is located an appreciable distance from power supply filter. (3) To improve transient response. If large capacitors are used, a high current diode from input to output (1N400l or similar) should be introduced to protect the device from momentary input short circuit. 15
16 Mechanical Dimensions Package Dimensions in millimeters TO ± ±0.20 (1.70) 1.30 ±0.10 (8.70) ø3.60 ± ± ± ±0.20 (1.46) (1.00) 1.27 ±0.10 (45 ) (3.00) (3.70) ± ± ± MAX. 2.54TYP [2.54 ±0.20] 0.80 ± TYP [2.54 ±0.20] ± ±
17 Ordering Information Product Number Tolerance Package Operating Temperature KA7905 KA7906 KA7908 KA7909 KA7910 ±4% KA7912 KA7915 KA7918 KA7924 KA7905A TO ~ +125 C KA7912A ±2% KA7915A 17
18 DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 11/12/02 0.0m 001 Stock#DSxxxxxxxx 2002 Fairchild Semiconductor Corporation
LM79XX. 3-Terminal 1A Negative Voltage Regulator. Features. Description. Internal Block Digram.
3-Terminal 1A Negative oltage Regulator www.fairchildsemi.com Features Output Current in Excess of 1A s of -5, -6, -8, -9, -10, -12, -15, -18 and - 24 Internal Thermal Overload Protection Short Circuit
More informationKA78TXX. 3-Terminal 3A Positive Voltage Regulator. Features. Description. Internal Block Diagram.
3Terminal 3A Positive oltage Regulator www.fairchildsemi.com Features Output Current in Excess of 3.0A Output Transistor Safe Operating Area Compensation Power Dissipation: 25W Internal Short Circuit Current
More informationMC78MXX/LM78MXX. 3-Terminal 0.5A Positive Voltage Regulator. Description. Features. Internal Block Digram.
3-Terminal 0.5A Positive oltage Regulator www.fairchildsemi.com Features Output Current up to 0.5A Output oltages of 5, 6, 8, 1, 15, 18, 4 Thermal Overload Protection Short Circuit Protection Output Transistor
More informationLM79XX/A (KA79XX, MC79XX) FIXED VOLTAGE REGULATOR (NEGATIVE)
3-ERMINAL 1A NEGAIE OLAGE REGULAORS he LM79XX series of three-terminal negative regulators are available in O-220 package and with several fixed output voltages, making them useful in a wide range of applications.
More informationKA79XX / KA79XXA / LM79XX 3-Terminal 1 A Negative Voltage Regulator
KA79XX / KA79XXA / LM79XX 3-Terminal 1 A Negative oltage Regulator Features Output Current in Excess of 1 A s of: -5, -6, -8, -9, -12, -15, -18, -24 Internal Thermal Overload Protection Short-Circuit Protection
More informationKA79XX / KA79XXA / LM79XX 3-Terminal 1 A Negative Voltage Regulator
KA79XX / KA79XXA / LM79XX 3-Terminal 1 A Negative oltage Regulator Features Output Current in Excess of 1 A s of: -5, -6, -8, -9, -12, -15, -18, -24 Internal Thermal Overload Protection Short-Circuit Protection
More informationMM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. LM78XX/LM78XXA 3-Terminal 1A Positive Voltage Regulator Features Output
More informationMM74C908 Dual CMOS 30-Volt Relay Driver
Dual CMOS 30-Volt Relay Driver General Description The MM74C908 is a general purpose dual high voltage driver capable of sourcing a minimum of 250 ma at V OUT = V CC 3V, and T J = 65 C. The MM74C908 consists
More informationMM82C19 16-Line to 1-Line Multiplexer
16-Line to 1-Line Multiplexer General Description The multiplex 16 digital lines to 1 output. A 4-bit address code determines the particular 1-of-16 inputs which is routed to the output. The data is inverted
More informationMM74C85 4-Bit Magnitude Comparator
4-Bit Magnitude Comparator General Description The MM74C85 is a four-bit magnitude comparator which will perform comparison of straight binary or BCD codes. The circuit consists of eight comparing inputs
More informationCD4028BC BCD-to-Decimal Decoder
CD4028BC BCD-to-Decimal Decoder General Description The CD4028BC is a BCD-to-decimal or binary-to-octal decoder consisting of 4 inputs, decoding logic gates, and 10 output buffers. A BCD code applied to
More information74AC08 74ACT08 Quad 2-Input AND Gate
Quad 2-Input AND Gate General Description The AC/ACT08 contains four, 2-input AND gates. Ordering Code: Features I CC reduced by 50% on 74AC only Outputs source/sink 24 ma Device also available in Tape
More informationLP8340 Low Dropout, Low I Q, 1.0A CMOS Linear Regulator
LP8340 Low Dropout, Low I Q, 1.0A CMOS Linear Regulator General Description The LP8340 low-dropout CMOS linear regulator is available in 5, 3.3, 2.5, 1.8 and adjustable output versions. Packaged in the
More information74VHC00 Quad 2-Input NAND Gate
Quad 2-Input NAND Gate General Description The HC00 is an advanced high-speed CMOS 2-Input NAND Gate fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent
More informationMM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter
MM74C00 MM74C02 MM74C04 Quad 2-Input NAND Gate Quad 2-Input NOR Gate Hex Inverter General Description The MM74C00, MM74C02, and MM74C04 logic gates employ complementary MOS (CMOS) to achieve wide power
More information74VHC00 Quad 2-Input NAND Gate
Quad 2-Input NAND Gate General Description The HC00 is an advanced high-speed CMOS 2-Input NAND Gate fabricated with silicon gate CMOS technology. It achieves the high-speed operation similar to equivalent
More informationMM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
More informationFJN3303 High Voltage Fast-Switching NPN Power Transistor
FJN3303 High oltage Fast-Switching NPN Power Transistor High oltage Capability High Switching Speed Suitable for Electronic Ballast and Charger Absolute Maximum Ratings T C = 25 C unless otherwise noted
More informationFAN4040 Precision Micropower Shunt Voltage Reference
www.fairchildsemi.com Precision Micropower Shunt Voltage Reference Features Fixed 2.500V, 3.300V and 5.00V s to ±0.1% (25 C) Low output noise Low temperature coefficient to 0ppm/ C Small package Extended
More informationRIGHT ANGLE SURFACE MOUNT INFRARED PHOTOTRANSISTOR
PACKAGE DIMENSIONS.16 (3.).11 (.8).43 (1.1).3 (.9) FRONT. (.).87 (.).71 (1.8).39 (1.).87 (.).71 (1.8) TOP.3 (.9) R.17 (.4) COLLECTOR MARK 1 NOTE:.16 (.4) BACK 1. Emitter. Collector 3. Tolerance of ±.1
More informationMM74C175 Quad D-Type Flip-Flop
Quad D-Type Flip-Flop General Description The MM74C175 coists of four positive-edge triggered D- type flip-flops implemented with monolithic CMOS technology. Both are true and complemented outputs from
More informationMM74C14 Hex Schmitt Trigger
MM74C14 Hex Schmitt Trigger General Description The MM74C14 Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement transistors. The
More informationH21A1 / H21A2 / H21A3 PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH
HA / HA / HA.07 (.85). (.8) NOTES: 0.9 (6.5) 0. (6.5) 0.5 (.) 0.9 (.0) PACKAGE DIMENSIONS.95 (7.5).7 (6.9) 0.97 (.7) 0.957 (.) 0.7 (.0) 0.57 (.6) D E 0.755 (9.) 0.75 (8.9) 0.9 (.) 0.9 (.0) Ø 0. (.) Ø 0.6
More informationNC7SB3157 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary)
September 1999 Revised November 1999 TinyLogic Low Voltage UHS Analog Switch 2-Channel Multiplexer/Demultiplexer (Preliminary) General Description The is a high performance, Analog Switch 2- channel CMOS
More informationCD4093BC Quad 2-Input NAND Schmitt Trigger
CD4093BC Quad 2-Input NAND Schmitt Trigger General Description The CD4093B consists of four Schmitt-trigger circuits. Each circuit functions as a 2-input NAND gate with Schmitttrigger action on both inputs.
More information74F30 8-Input NAND Gate
8-Input NAND Gate General Description This device contains a single gate, which performs the logic NAND function. April 1988 Revised October 2000 74F30 8-Input NAND Gate Ordering Code: Order Number Package
More informationCD40106BC Hex Schmitt Trigger
CD40106BC Hex Schmitt Trigger General Description The CD40106BC Hex Schmitt Trigger is a monolithic complementary MOS (CMOS) integrated circuit constructed with N and P-channel enhancement transistors.
More information3-TERMINAL 0.1A NEGATIVE VOLTAGE REGULATOR
3-TERMINAL A NEGATIE OLTAGE REGULATOR FEATURES Output Current Up to 1 No External Components Internal Thermal Overload Protection Internal Short-Circuit Limiting Output oltage of 5, 6, 8, 9, 12, 15, 18
More informationIo=500mA LDO with Reset function
Io=mA LDO with Reset function GENERAL DESCRIPTION The NJW4116 is a ma output low dropout voltage regulator with reset function monitoring output voltage. Reset Output Hold Time is adjustable by external
More informationDM74LS02 Quad 2-Input NOR Gate
Quad 2-Input NOR Gate General Description This device contains four independent gates each of which performs the logic NOR function. Ordering Code: May 1986 Revised March 2000 Order Number Package Number
More informationCD4028BC BCD-to-Decimal Decoder
BCD-to-Decimal Decoder General Description The is a BCD-to-decimal or binary-to-octal decoder consisting of 4 inputs, decoding logic gates, and 10 output buffers. A BCD code applied to the 4 inputs, A,
More informationMM74C906 Hex Open Drain N-Channel Buffers
Hex Open Drain N-Channel Buffers General Description The MM74C906 buffer employs monolithic CMOS technology in achieving open drain outputs. The MM74C906 consists of six inverters driving six N-channel
More informationDM7404 Hex Inverting Gates
DM7404 Hex Inverting Gates General Description This device contains six independent gates each of which performs the logic INVERT function. Ordering Code: August 1986 Revised February 2000 DM7404 Hex Inverting
More informationOptical (2.8) (2.3) PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER
PACKAGE DIMENSIONS 0.97 (.7) 0.957 (.3) 0.7 (.0) 0.57 (.6) Ø 0.33 (3.) Ø 0.6 (3.) (X) 0.9 (6.35) 0.3 (6.5) D E 0.755 (9.) 0.75 (8.9) 0.39 (.00) 0.3 (0.85) 0.9 (3.3) 0.9 (3.0) 0.03 (.60) NOM 0.33 (.0) 0.
More information74VHC138 3-to-8 Decoder/Demultiplexer
74HC138 3-to-8 Decoder/Demultiplexer General Description The HC138 is an advanced high speed CMOS 3-to-8 decoder/demultiplexer fabricated with silicon gate CMOS technology. It achieves the high speed operation
More informationPHOTODARLINGTON OPTICAL INTERRUPTER SWITCH
HB HB HB3 PACKAGE DIMENSIONS 0.7 (.0) 0.57 (.6) C L 0.9 (6.35) 0.3 (6.5) D E C L 0.39 (.00) 0.3 (0.85).33 (3.38).073 (.85) 0.9 (3.3) 0.9 (3.0) 0.33 (.0) 0. (0.7) Optical C L 0.5 (3.) 0.9 (3.0).35 (8.00).95
More informationLow Power Quint Exclusive OR/NOR Gate
100307 Low Power Quint Exclusive OR/NOR Gate General Description The 100307 is monolithic quint exclusive-or/nor gate. The Function output is the wire-or of all five exclusive-or outputs. All inputs have
More informationMM74HC154 4-to-16 Line Decoder
4-to-16 Line Decoder General Description The MM74HC154 decoder utilizes advanced silicon-gate CMOS technology, and is well suited to memory address decoding or data routing applications. It possesses high
More informationMM74HC08 Quad 2-Input AND Gate
Quad 2-Input AND Gate General Description The MM74HC08 AND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard
More informationPHOTOVOLTAIC SOLID-STATE RELAY OPTOCOUPLERS
PACKAGE SCHEMATIC ANODE 6 DRAIN 6 CATHODE 2 5 6 N/C 3 4 DRAIN DESCRIPTION The HSR32 and HSR42 devices consist of a AlGaAs infrared emitting diode optically coupled to a power MOSFET detector which is driven
More informationMM74HC00 Quad 2-Input NAND Gate
MM74HC00 Quad 2-Input NAND Gate General Description The MM74HC00 NAND gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption
More informationOBSOLETE - PART DISCONTINUED
General Description The series are three terminal positive regulators designed for a wide variety of applications including local, on-card regulation. The are complete with internal current limiting, thermal
More informationDM7417 Hex Buffers with High Voltage Open-Collector Outputs
August 1986 Revised July 2001 DM7417 Hex Buffers with High Voltage Open-Collector Outputs General Description This device contains six independent gates each of which performs a buffer function. The open-collector
More informationMM74C93 4-Bit Binary Counter
MM74C93 4-Bit Binary Counter General Description The MM74C93 binary counter and complementary MOS (CMOS) integrated circuits cotructed with N- and P- channel enhancement mode traistors. The 4-bit binary
More information74VHC139 Dual 2-to-4 Decoder/Demultiplexer
74HC139 Dual 2-to-4 Decoder/Demultiplexer General Description Ordering Code: November 1992 Revised April 1999 The HC139 is an advanced high speed CMOS Dual 2-to- 4 Decoder/Demultiplexer fabricated with
More informationCD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate
Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate General Description The CD4071BC and CD4081BC quad gates are monolithic complementary MOS (CMOS) integrated circuits constructed
More informationMM74C221 Dual Monostable Multivibrator
MM74C221 Dual Monostable Multivibrator General Description The MM74C221 dual monostable multivibrator is a monolithic complementary MOS integrated circuit. Each multivibrator features a negative-traition-triggered
More informationDM7490A Decade and Binary Counter
Decade and Binary Counter General Description The DM7490A monolithic counter contains four masterslave flip-flops and additional gating to provide a divide-bytwo counter and a three-stage binary counter
More informationHIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
DESCRIPTION The / optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. The devices are housed in a compact small-outline
More informationDM74LS75 Quad Latch. DM74LS75 Quad Latch. General Description. Ordering Code: Connection Diagram. Logic Diagram. Function Table (Each Latch)
Quad Latch General Description These latches are ideally suited for use as temporary storage for binary information between processing units and input/output or indicator units. Information present at
More informationFJPF13007 High Voltage Fast-Switching NPN Power Transistor
FJPF3007 High oltage Fast-Switching NPN Power Transistor High oltage Capability High Switching Speed Suitable for Electronic Ballast and Switching Mode Power Supply Absolute Maximum Ratings T C = 25 C
More informationDM Quad 2-Input NAND Buffers with Open-Collector Outputs
September 1986 Revised July 2001 DM7438 7438 Quad 2-Input NAND Buffers with Open-Collector Outputs General Description This device contains four independent gates each of which performs the logic NAND
More information74F153 Dual 4-Input Multiplexer
74F153 Dual 4-Input Multiplexer General Description The F153 is a high-speed dual 4-input multiplexer with common select inputs and individual enable inputs for each section. It can select two lines of
More informationMM74HC139 Dual 2-To-4 Line Decoder
MM74HC139 Dual 2-To-4 Line Decoder General Description The MM74HC139 decoder utilizes advanced silicon-gate CMOS technology, and is well suited to memory address decoding or data routing applications.
More informationMM74C90 MM74C93 4-Bit Decade Counter 4-Bit Binary Counter
4-Bit Decade Counter 4-Bit Binary Counter General Description The MM74C90 decade counter and the MM74C93 binary counter and complementary MOS (CMOS) integrated circuits constructed with N- and P-channel
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. L7900 SERIES NEGATIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5A OUTPUT
More informationMM74HC4020 MM74HC Stage Binary Counter 12-Stage Binary Counter
February 1984 Revised February 1999 MM74HC4020 MM74HC4040 14-Stage Binary Counter 12-Stage Binary Counter General Description The MM74HC4020, MM74HC4040, are high speed binary ripple carry counters. These
More information74F139 Dual 1-of-4 Decoder/Demultiplexer
74F139 Dual 1-of-4 Decoder/Demultiplexer General Description The F139 is a high-speed, dual 1-of-4 decoder/demultiplexer. The device has two independent decoders, each accepting two inputs and providing
More informationDM74LS09 Quad 2-Input AND Gates with Open-Collector Outputs
August 1986 Revised March 2000 DM74LS09 Quad 2-Input AND Gates with Open-Collector Outputs General Description This device contains four independent gates each of which performs the logic AND function.
More informationTLF80511TF. Data Sheet. Automotive Power. Low Dropout Linear Fixed Voltage Regulator TLF80511TFV50 TLF80511TFV33. Rev. 1.
Low Dropout Linear Fixed Voltage Regulator V50 V33 Data Sheet Rev. 1.0, 2014-01-28 Automotive Power Table of Contents 1 Overview....................................................................... 3
More information5A Low Dropout Linear Regulator
Solved by SP084 TM 5A Low Dropout Linear Regulator TO-- features INPUT Low Dropout oltage:. Typically at 5A Current Limiting and Thermal Protection Output Current: 5A Current Limit:.5A Operating Junction
More informationDM Bit Addressable Latch
8-Bit Addressable Latch General Description The DM9334 is a high speed 8-bit Addressable Latch designed for general purpose storage applications in digital systems. It is a multifunctional device capable
More informationML7905 to ML7909 ML Storage Temperature Range Tstg -40 to Operating Junction Temperature
ML7900 SERIES 3-TERMINAL NEGATIVE VOLTAGE REGULATOR The ML7900 series are 3-Terminal Negative Voltage Regulators. These negative regulators are intended as complements to the popular ML7800 series of positive
More informationMM74HC32 Quad 2-Input OR Gate
Quad 2-Input OR Gate General Description The MM74HC32 OR gates utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard
More informationDM74LS08 Quad 2-Input AND Gates
DM74LS08 Quad 2-Input AND Gates General Description This device contains four independent gates each of which performs the logic AND function. Ordering Code: August 1986 Revised March 2000 Order Number
More informationCD4071BC CD4081BC Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate
Quad 2-Input OR Buffered B Series Gate Quad 2-Input AND Buffered B Series Gate General Description The CD4071BC and CD4081BC quad gates are monolithic complementary MOS (CMOS) integrated circuits cotructed
More informationCD4528BC Dual Monostable Multivibrator
Dual Monostable Multivibrator General Description The CD4528BC is a dual monostable multivibrator. Each device is retriggerable and resettable. Triggering can occur from either the rising or falling edge
More informationHIGH SPEED TRANSISTOR OPTOCOUPLERS
DESCRIPTION The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact pin small outline package. A separate connection
More information4N25 4N26 4N27 4N28. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) SCHEMATIC. Order this document by 4N25/D STANDARD THRU HOLE
Order this document by N/D GlobalOptoisolator The N, N, N7 and N8 devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector. Most
More informationMOC8111 MOC8112 MOC8113
PACKAGE SCHEMATIC ANODE 6 N/C 6 6 CATHODE 2 5 COLLECTOR N/C 3 4 EMITTER 6 DESCRIPTION The MOC8X series consists of a Gallium Arsenide IRED coupled with an NPN phototransistor. The base of the transistor
More information4-PIN PHOTOTRANSISTOR OPTOCOUPLERS
PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor
More information74F194 4-Bit Bidirectional Universal Shift Register
74F194 4-Bit Bidirectional Universal Shift Register General Description The 74F194 is a high-speed 4-bit bidirectional universal shift register. As a high-speed, multifunctional, sequential building block,
More informationMM74HC540 MM74HC541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer
September 1983 Revised February 1999 MM74HC540 MM74HC541 Inverting Octal 3-STATE Buffer Octal 3-STATE Buffer General Description The MM74HC540 and MM74HC541 3-STATE buffers utilize advanced silicon-gate
More informationCD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset
October 1987 Revised January 1999 CD4027BC Dual J-K Master/Slave Flip-Flop with Set and Reset General Description The CD4027BC dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits
More information4-PIN PHOTOTRANSISTOR OPTOCOUPLERS
PACKAGE HAA84 SCHEMATIC 4 COLLECTOR 4 2 3 EMITTER DESCRIPTION The HAA84 Series consists of two gallium arsenide infrared emitting diodes, connected in inverse parallel, driving a single silicon phototransistor
More information74VHC74 Dual D-Type Flip-Flop with Preset and Clear
74HC74 Dual D-Type Flip-Flop with Preset and Clear General Description Ordering Code: October 1992 Revised March 1999 The HC74 is an advanced high speed CMOS Dual D- Type Flip-Flop fabricated with silicon
More information74F537 1-of-10 Decoder with 3-STATE Outputs
1-of-10 Decoder with 3-STATE Outputs General Description The 74F537 is one-of-ten decoder/demultiplexer with four active HIGH BCD inputs and ten mutually exclusive outputs. A polarity control input determines
More informationMM74HCT08 Quad 2-Input AND Gate
MM74HCT08 Quad 2-Input AND Gate General Description The MM74HCT08 is a logic function fabricated by using advanced silicon-gate CMOS technology which provides the inherent benefits of CMOS low quiescent
More information74LCX112 Low Voltage Dual J-K Negative Edge-Triggered Flip-Flop with 5V Tolerant Inputs
June 1998 Revised February 2001 74LCX112 Low oltage Dual J-K Negative Edge-Triggered Flip-Flop with 5 Tolerant Inputs General Description The LCX112 is a dual J-K flip-flop. Each flip-flop has independent
More information74VHC393 Dual 4-Bit Binary Counter
Dual 4-Bit Binary Counter General Description March 1993 Revised March 1999 The HC393 is an advanced high speed CMOS 4-bit Binary Counter fabricated with silicon gate CMOS technology. It achieves the high
More informationMM74HC138 3-to-8 Line Decoder
3-to-8 Line Decoder General Description The MM74HC138 decoder utilizes advanced silicon-gate CMOS technology and is well suited to memory address decoding or data routing applications. The circuit features
More information74F109 Dual JK Positive Edge-Triggered Flip-Flop
Dual JK Positive Edge-Triggered Flip-Flop General Description The F109 consists of two high-speed, completely independent transition clocked JK flip-flops. The clocking operation is independent of rise
More informationDual N & P-Channel Enhancement Mode Field Effect Transistor. Features R DS(ON) = V GS = 4.5 V G2 6 Q1(N) TA=25 o C unless otherwise noted
Dual N & P-Channel Enhancement Mode Field Effect Transistor May General Description These dual N & P-Channel Enhancement Mode Field Effect Transistors are produced using Fairchild s proprietary, high cell
More informationTLE Data Sheet. Automotive Power. 5-V Low Dropout Voltage Regulator TLE7274-2E TLE7274-2D TLE7274-2G. Rev. 1.01,
5-V Low Dropout Voltage Regulator TLE7274-2E TLE7274-2D TLE7274-2G Data Sheet Rev. 1.1, 211-11-3 Automotive Power 5-V Low Dropout Voltage Regulator TLE7274-2 1 Overview Features Ultra Low Current Consumption
More informationMM74HCT138 3-to-8 Line Decoder
3-to-8 Line Decoder General Description The MM74HCT138 decoder utilizes advanced silicon-gate CMOS technology, and are well suited to memory address decoding or data routing applications. Both circuits
More informationMM74C73 Dual J-K Flip-Flops with Clear and Preset
MM74C73 Dual J-K Flip-Flops with Clear and Preset General Description The MM74C73 dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits cotructed with N- and P-channel enhancement
More informationAC INPUT/PHOTOTRANSISTOR OPTOCOUPLERS
HAA HAA3 HAA2 HAA4 DESCRIPTION The HAAX series consists of two gallium-arsenide infrared emitting diodes connected in inverse parallel driving a single silicon phototransistor output. FEATURES Bi-polar
More informationCD4024BC 7-Stage Ripple Carry Binary Counter
CD4024BC 7-Stage Ripple Carry Binary Counter General Description The CD4024BC is a 7-stage ripple-carry binary counter. Buffered outputs are externally available from stages 1 through 7. The counter is
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 1A LOW-DROPOUT POSITIE OLTAGE REGULATOR 1 DESCRIPTION The UTC is a low dropout regulator designed to provide output current up to 1A with a typically 5m dropout oltage and
More information74F175 Quad D-Type Flip-Flop
Quad D-Type Flip-Flop General Description The 74F175 is a high-speed quad D-type flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information
More information74VHC245 Octal Bidirectional Transceiver with 3-STATE Outputs
November 1992 Revised April 2005 74HC245 Octal Bidirectional Traceiver with 3-STATE Outputs General Description The HC245 is an advanced high speed CMOS octal bus traceiver fabricated with silicon gate
More informationMM74C912 6-Digit BCD Display Controller/Driver
6-Digit BCD Display Controller/Driver General Description The display controllers are interface elements, with memory, that drive a 6-digit, 8-segment LED display. The display controllers receive data
More informationHIGH SPEED TRANSISTOR OPTOCOUPLERS
SINGLECHANNEL: PACKAGE SCHEMATIC N/C V CC + V CC V F + V F 7 V B _ 7 V 0 _ V O _ V 0 V F N/C 4 5 GND + 4 5 GND,,, Pin 7 is not connected in Part Number / DESCRIPTION The /, / and / optocouplers consist
More informationKA78XXE/KA78XXAE 3-Terminal 1A Positive Voltage Regulator
KA78XXE/KA78XXAE 3-Terminal 1A Positive Voltage Regulator Features Output Current up to 1A Output Voltages of 5, 6, 8, 9, 10, 12, 15, 18, 24V Thermal Overload Protection Short Circuit Protection Output
More informationMM74HC175 Quad D-Type Flip-Flop With Clear
Quad D-Type Flip-Flop With Clear General Description The MM74HC175 high speed D-type flip-flop with complementary outputs utilizes advanced silicon-gate CMOS technology to achieve the high noise immunity
More information74LCX16374 Low Voltage 16-Bit D-Type Flip-Flop with 5V Tolerant Inputs and Outputs
74LCX16374 Low oltage 16-Bit D-Type Flip-Flop with 5 Tolerant Inputs and Outputs General Description The LCX16374 contains sixteen non-inverting D-type flip-flops with 3-STATE outputs and is intended for
More information74ACT Bit D-Type Flip-Flop with 3-STATE Outputs
74ACT18823 18-Bit D-Type Flip-Flop with 3-STATE Outputs General Description The ACT18823 contains eighteen non-inverting D-type flipflops with 3-STATE outputs and is intended for bus oriented applications.
More informationMM74HC244 Octal 3-STATE Buffer
MM74HC244 Octal 3-STATE Buffer General Description The MM74HC244 is a non-inverting buffer and has two active low enables (1G and 2G); each enable independently controls 4 buffers. This device does not
More informationCD4021BC 8-Stage Static Shift Register
8-Stage Static Shift Register General Description The CD4021BC is an 8-stage parallel input/serial output shift register. A parallel/serial control input enables individual JAM inputs to each of 8 stages.
More information