CapXon. History. Quality Policy. General Information

Transcription

1 History 90 Capxon Electronic Ind. Co., Ltd. established with manufacturing aluminum electrolytic capacitor. 9 Bought a new building in Shi Chih Town, and started to invest automatic manufacturing machines. 99 Pushed new products development and whole line automatic. 99 Established Capxon Electronic (Shen Zhen) Co., Ltd. in Shen Zhen City, Guang Dong, China. 99 ISO-900 certification both in Taiwan Factory (No. ) and Shen Zhen Factory. (No.99) 99 Shen Zhen Factory increased manufacturing area to 0, Cooperated with Capxon Electronic Technology ( Ren Hua ) Co., Ltd. to be a partner for Aluminum foil formed in Ren Hua, China. 99 Cooperated with Hill Source Electronic Co., Ltd. for lead wire in Shen Zhen, China. 999 ISO-900 certification in Shen Zhen Factory. (No..). 00 Started to produce SMD E. Cap. in Taiwan Factory. ISO-900 certification in Taiwan Factory, (No AQ-RGA-RvA.) Established Capxon Electronics (Suzhou) Co., Ltd. in Suzhou City, Jiangsu, China. 00 Shen Zhen Factory increased to 0,000. Cooperated with Yichang Fengshuo Equipment Co., Ltd. for foil machine in Yichang City, Huhei, China. Cooperated with Capxon Electronic Technology (Yichang Sanxia) Co., Ltd. for foil formed/etched in Yichang City, Hubei, China. 00 Established Capxon Electronic (Shen-Zhen) Co., Ltd. Suzhou Branch in Suzhou City, Jiangsu, China. Established Capxon Electronic (Shen-Zhen) Co., Ltd. Tian Jin Branch in Tian Jin City, China. Got the Award of "Best Supplier" from LG. 00 ISO-00 certification in Shen Zhen Factory. (No.00E000R0S) 00 Earned the "SQCI Certificate" from Sumsung, to be the only one capacitor vender in Taiwan. 00 Q Set up V-chip and screw terminal production line in Shen Zhen Factory. 00 Mass Production of Conductive Polymer Aluminum Electrolytic Capacitor 00 Listed on Hong Kong Stock Exchange Quality Policy We adhere to the tenet of "QUALITY FIRST", and offer satisfying products and service to the customer. General Information Established: June,90 November, 99 Capital: NT$00,000,000 NT$,00,000 (US$9,,9) (US$9,0,000) Taipei, Taiwan Mainland China Building:,00M 0,000M Employees QA 0 00 ENG 0 Other 0 Total 0 9 Main Product: Aluminum Electrolytic Capacitor

2 Contents ALUMINUM ELECTROLYTIC CAPACITORS CONTENTS PAGE. List of the Products.... Product System.... Part Number System.... Cutting & Forming Specifications Taping Specifications.... Package for SMD Type.... Precautions & Guidelines.... Individual Specification by Series... Note:.Specification and dimensions in this catalogue are subject to change without notice. If necessary, drawing can be provided..catalogue printed in Sep. 00.

3 List of the Products Conductive Polymer SMD type Ultra-miniature type Standard type Series Sleeve Color NEW NEW NEW NEW NEW NEW Type Features Operating Temperature Range Working Voltage Capacitance Leakage Current PL Radial Very low ESR - to +0.~V 0~00 F 0.CV 000 PS Radial Standard - to +0.~V 9~00 F 0.CV 000 PU Radial Ultra low ESR - to +0.~0V 0~00 F 0.CV PX Radial Low profile - to +0.~V 0~0 F 00 A 000 PE Radial Ultra low ESR, Down size to.x (mm) - to +0.~.V 0~0 F 0.CV 000 PM SMD SMD & Low profile - to +0.~V 0~0 F 00 A 000 PD SMD SMD & Large capacitance - to +0.~V 9~00 F 0.CV PV SMD SMD & Low height - to +0.~V 9~00 F 0.CV 000 EV SMD 0, Standard -0 to +0.~0V 0.~00 F 0.0CV or A 000 LV SMD, Standard -0 to + ~0V 0.~00 F 0.0CV or A 000 HV SMD Wide temperature range -0 to +0.~0V 0.~00 F 0.0CV or A JV SMD 000 hrs life -0 to +0.~0V 0.~000 F 0.0CV or A 000 MV SMD 000 hrs life -0 to +0.~0V 0.~000 F 0.0CV or A 000 NV SMD. ~ 0.mm height, Non-polar -0 to +.~0V 0.~0 F 0.0CV or 0 A 000 KV SMD, Low leakage current -0 to +.~0V 0.~0 F 0.00CV or 0. A 000 ZV SMD 0, Low impedance - to +0.~0V ~00 F 0.0CV or A DV SMD 0, Low impedance - to +0.~0V ~00 F I 0.0CV or A 000 TV SMD -0 to + 0~0V 0~0 F 0.0CV or A SS Radial mm, Standard, -0 to + ~0V 0.~0 F 0.0CV or A 000 ST Radial mm, Standard, 0-0 to +0 ~0V 0.~00 F 0.0CV or A 000 SA Radial mm, Low leakage current -0 to + ~0V 0.~00 F 0.00CV or 0. A SP Radial mm, Non-polar -0 to +.~0V 0.~ F 0.0CV or 0 A 000 SM Radial mm, Standard, -0 to + ~V 0.~0 F 0.0CV or A 000 SH Radial mm,, Long life -0 to + ~V 0.~0 F 0.0CV or A 000 SK Radial mm, Standard, 0-0 to +0 ~V 0.~0 F 0.0CV or A 000 SJ Radial mm, 0, Long life -0 to +0.~V 0.~0 F 0.0CV or A SL Radial mm, Low leakage current, -0 to +.~0V 0.~0 F 0.00CV or 0. A 000 SD Radial mm, Low leakage current, 0-0 to +0 ~V 0.~00 F 0.00CV or 0. A 000 SN Radial ~ 9mm, Non-polar, -0 to +.~0V 0.~0 F 0.0CV or0 A 000 SB Radial mm, Non-polar, 0-0 to +0.~0V 0.~00 F 0.0CV or0 A 000 SZ Radial mm, Low impedance - to +0.~V.~0 F 0.0CV or A SY Radial mm, Low impedance, Long life - to +0.~0V ~0 F 0.0CV or A GS (GR) GW KM KW Radial General purpose, Radial 9~mm height low profile, Radial Standard, 0 Radial 9~mm height low profile, 0-0 to + - to + -0 to + - to + -0 to +0 - to +0-0 to +0 - to +0.~00V 0~0V.~00V 0~0V.~00V 0~0V.~00V 0~0V 0.~000 F 0.~0 F.~0000 F.~0 F 0.~000 F 0.~0 F.~0000 F.~0 F 0.0CV or A 0.0CV 0.0CV or A 0.0CV + 00 A 0.0CV or A 0.0CV 0.0CV or A 0.0CV + 00 A LL Radial Low leakage current -0 to +0.~V 0.~00 F 0.00CV or 0. A Load Life Hrs 000 ~ Page Low Impedance / ESR type NEW GL Radial Low impedance and Low ESR Miniaturized - to +0.~V 0.~0000 F 0.0CV or A KF Radial Low impedance for power supply -0 to +0 - to +0.~00V 0~0V 0.~000 F 0.~0 F 0.0CV or A 0.0CV KZ Radial Low impedance -0 to +0.~0V 0.~00 F 0.0CV or A GF Radial Low impedance - to +0.V~00V.~00 F 0.0CV or A 000 ~ ~ ~ ~ 000 LZ Radial Ultra low ESR and High ripple current -0 to +0.~V 0~00 F 0.0CV or A 000 GH Radial High temperature and Long life - to +0.~0V 0.~00 F 0.0CV or A 000 ~

4 High reliability type Non/Bi polarized type Series Sleeve Color Type Features Operating Temperature Range Working Voltage Capacitance Leakage Current KL Radial Long life,000 hrs - to +0 0~0V 0~0 F 0.0CV + 00 A KH TH Radial Long life,000~0,000 hrs Radial For high temperature + -0 to +0 - to +0-0 to + - to + 0~0V 0~0V 0~00V 0~0V.~00 F.~0 F 0.~000 F ~00 F 0.0CV or A 0.0CV + 00 A 0.0CV or A 0.0CV A TE Radial For high temperature +0-0 to +0 0~0V.~00 F 0.0CV or A Load Life Hrs 000 ~ ~ ~ 000 KS Radial Over voltage vent operating facility - to +0 00,00WV.~0 F 0.0CV 000 FK Radial Long life for ballast - to +0 0~0WV ~0 F 0.0CV+00 A FL Radial Long life for ballast - to +0 0~0WV ~0 F 0.0CV+00 A NP NK Radial Non-polarized, Radial Non-polarized, 0-0 to + - to + -0 to +0 - to +0.~00V 0~0V.~00V 0~0V 0.~00 F 0.~ F 0.~00 F 0.~ F 000 ~ ~ 0000 Page 9 0.0CV or A CV or A 000 BP Radial Bi-polarized -0 to +0 /0/V.~ F 00 A 000 For Audio Equipment Large can type Photo flash type Screw large can type SW Radial mm height, for audio equipment -0 to + ~0V 0.~0 F 0.0CV or A SR Radial mm height, for audio equipment -0 to +.~0V 0.~0 F 0.0CV or A 000 RW Radial Standard, for audio equipment -0 to +.~00V 0.~,000 F 0.0CV or A 000 NR Radial Non-polar, for audio equipment -0 to +.~00V 0.~,000 F 0.0CV or A 000 LR Snap-in, for audio equipment -0 to + ~00V 0~,000 F 0.0CV A 000 LP Snap-in, Standard -0 to + - to + 0~00V 0~0V 0~000 F ~00 F 0.0CV A 000 LS Snap-in, Miniaturized - to + 0~0V ~00 F 0.0CV A 000 HP Snap-in 0, Standard -0 to +0 - to +0 0~00V 0~0V 0~000 F ~00 F 0.0CV A HS Snap-in 0, Miniaturized - to +0 0~0V ~00 F 0.0CV A 000 HL LT Snap-in Long life with low ESR Snap-in Snap-in terminals type -0 to +0 - to +0-0 to + - to + 0~00V 0~00V ~00V 0~0V 0~000 F ~00 F 00~000 F 0~00 F 0.0CV A CV A 000 HT Snap-in Snap-in terminals type - to +0 0~00V ~00 F 0.0CV A 000 RF Radial Photo flash equipment -0 to + 0/0V 00~0 F XC A 000times SF Snap-in Photo flash equipment -0 to + 0/0V 0~00 F XC A 000times RP Screw, Standard RH Screw 0, Standard -0 to + - to + -0 to +0 - to +0 ~00V 0~0V ~00V 0~00V 00~000 F 0~000 F 0.0CV A ~0000 F 0.0CV A ~000 F RL Screw 0, Long life - to +0 00V/0V 00~00 F 0.0CV A Flame retardant type NEW NEW NEW NEW WF Radial Flame retardant type at - to + 00V, 0V. to 0 F I 0.0CV MF Radial Flame retardant type at 0 - to +0 00V, 0V. to 0 F I 0.0CV LF Snap-in Flame retardant type at - to + 00V, 0V to 0 F I 0.0CV HF Snap-in Flame retardant type at 0 - to +0 00V, 0V to 0 F I 0.0CV

5 Product System Conductive Polymer AL.E. Capacitors Radial type PS 0 000H.~V 9~00 F Low ESR PL 0 000H.~V 0~00 F Ultra low ESR PU 0 000H.~0V 0~00 F NEW PX 0 000H.~V 0~0 F Low profile NEW PE 0 000H.~.V 0~0 F Down size Conductive Polymer AL.E. Capacitors SMD type NEW NEW NEW PM 0 000H.~V 0~0 F Low profile PD 0 000H.~V 9~00 F Low height PV 0 000H.~V 9~00 F Aluminum Electrolytic Capacitors SMD type NEW DV 0 000H.~0WV.0~00 F Long life ZV 0 000H.~0WV.0~00 F KV 000H.~0WV 0.~0 F HV 0 000H.~0WV 0.~00 F Long life EV 0 000H.~0WV 0.~00 F Low impedance High temp. LV 000H ~0WV 0.~00 F Low leakage current Non-Polarized NV 000H.~0WV 0.~0 F JV 0 000H.~0WV 0.~000 F TV ~000H 0~0WV 0~0 F MV 0 000H.~0WV 0.~000 F

6 Product System Aluminum Electrolytic Capacitors GS(GR) 000H.~0WV 0.~000 F Low profile 9~mm GW 000H.~0WV.~0000 F Low profile mm SM 000H ~WV 0.~0 F Radial type (Miniature) Long life SH 000H ~WV 0.~0 F Low profile mm SS 000H ~0WV 0.~0 F (High temperature) KM 0 000H.~0WV 0.~000 F TH -000H 0~0WV 0.~000 F Low profile 9~mm KW 0 000H.~0WV.~0000 F TE 0-000H 0~0WV.~00 F Low profile mm SK 0 000H ~WV 0.~0 F Low Z SZ 0 000H.~WV.~0 F Long life SJ 0 000H.~WV 0.~0 F SY 0 000H.~0WV ~0 F Low profile mm ST 0 000H ~0WV 0.~00 F (High Reliability) GL 0 ~000H.~WV 0.~0000 F KZ 0-000H.~0WV 0.~00 F GF 0 ~000H.~00WV.~00 F KF 0 ~000H.~0WV 0.~000 F LZ 0 000H.~WV 0~00 F KL 0 000H 0~0WV 0~0 F NEW GH 0 ~0000H.~0WV 0.~00 F KH 0 ~0000H 0~0WV.~00 F KS 0 000H 00,00WV.~0 F FL 0 ~0000H 0~0WV ~0 F Long life FK 0 ~000H 0~0WV ~0 F (Non/Bi-Polar) LL 0 000H.~WV 0.~00 F (Low Leakage Current) Low profile mm SL 000H.~0WV 0.~0 F Low profile mm SA 000H ~0WV 0.~00 F NP 000H.~0WV 0.~00 F High temp. NK 0 000H.~0WV 0.~00 F Low profile mm SN 000H.~0WV 0.~0 F Low profile mm SB 0 000H.~0WV 0.~00 F SP 000H.~0WV 0.~ F High temp. SD 0 000H ~WV 0.~00 F BP 0 000H /0/WV.~ F

7 Product System Aluminum Electrolytic Capacitors For audio equipment RW 000H. ~ 00WV 0. ~ 000 F Low profile mm SR 000H. ~ 0WV 0. ~ 0 F Low profile mm SW 000H ~ 0WV 0. ~ 0 F Non-polarized NR 000H. ~ 00WV 0. ~ 000 F LR 000H ~ 00WV 0 ~ 000 F Aluminum Electrolytic Capacitors Snap-in type LP 000H 0~0WV ~000 F Miniaturized LS 000H 0~0WV ~00 F High temp. HP 0 000H 0~0WV ~000 F Miniaturized HS 0 000H 0~0WV ~00 F Low Z HL 0 000H 0~00WV ~000 F ( Terminals) LT 000H ~0WV 0~000 F High temp. HT 0 000H 0~00WV ~00 F Aluminum Electrolytic Capacitors Photo flash type RF 000times 0/0WV 00~0 F SF 000times 0/0WV 0~00 F Aluminum Electrolytic Capacitors RP 000H ~0WV 0~000 F High temp. RH 0 000H ~00WV 0~0000 F Long life Screw type RL 0 000H 00/0WV 00~00 F Aluminum Electrolytic Capacitors Flame retardant type WF 000H 00/0WV.~0 F High temp. MF 0 000H 00/0WV.~0 F LF 000H 00/0WV ~0 F NEW NEW NEW NEW High temp. HF 0 000H 00/0WV ~0 F

8 Part Number System When placing an order for aluminum electrolytic capacitors, please observe following catalog part number format that describes ().Series (2).Capacitance (3).Capacitance tolerance (4).Working voltage (5).Case φd (6).Height (mm) (7).Type (8).Customer requirement (9).Sleeve material ().Rubber shape, or terminal height, or plastic platform material ().Special requirement (2).Lead treatment () Series For the details, please refer to List of the Products on page 3 (2) Capacitance Capacitance is shown in microfarads (µf) μf Code 0R R47 0 4R (3) Capacitance tolerance Tolerance% ±5 ± ±20 ±30 -to+30 -to+50 -to+20 -to0 0to+20-30to+0 ±5 Code H K M N Q T V W Z U S Tolerance% 0to+30 0to+40 0to+50-5to+20-8to+5 +5to+20 0to-20-5to+20 -to+85-50to+0-5to+30 Code Y X A J E I B P L O C

9 Part Number System (4) Working voltage (W.V) Voltage(W.V) Code 2R R (5) Case(ΦD) Diameter Code A B C E F G H Z I Y J K L M N O P Q U V R S T X (6) Height (L:mm) Description Code A00 A5 A20 B00 B30 (7) Type Type SMD Polymer Radial Snap-in Screw Code R P A (8) The fifteenth code: to classify the products according to customers' requirement, namely, ~9 (9) Sleeve material Sleeve material PET PVC Nylon Code P C N () Rubber shape or terminal height or plastic platform material Rubber shape of radial type or plastic platform material of SMD and polymer Type Rubber shape of radial Spacer Material of SMD and Polymer Flat shape Gourd shape Half-moon shape PPS Nylon Code F C B S N * If SMD and Polymer capacitors are added plastic platforms, the shape of rubber is plane, if not, they are coded according to rubber shape of radial capacitor. The code of terminals length of snap-in: Terminals (mm) Code A B C D E F G () Special requirement Description Over voltage vent operation Load life Impedance & ESR Ripple current DF LC Code S L Z R T C Description Sleeve printing Height Pitch Lead wire K vent Over 2 requests Code P H F D K I If there is no special requirement in eighteenth code, will add 0 before nineteenth code. If there is no special requirement in nineteenth, too, it s not necessary to fill both. (2) The nineteenth, twentieth code: Lead treatment 9

10 Cutting & Forming Specifications Standard 8 Dφ L 20 L 20 F dφ Part No. Code (9th, 20th) Cutting & Forming Size (mm) d φ±0.0 Fig Dφ 4 5 F CF Fig d φ±0.0 Fig Dφ F Fig KF H2±0.5 d φ±0.0 H2± max Fig Fig Fig Dφ 4 5 F E.2.2 H 4 4 H2.8.8 Fig Dφ 5 8 F E H H

11 Cutting & Forming Specifications Part No. Code (9th, 20th) Cutting & Forming Size (mm) CA Dφ F CK Dφ F C K d φ±0.0 Fig Fig Dφ 4 5 F FA Fig Dφ F Fig H2±0.5 d φ±0.0 H±0.5 Fig Fig Dφ F E H H KA Fig Fig Dφ F H H H

12 Cutting & Forming Specifications Part No. Code (9th, 20th) Cutting & Forming Size (mm) EF Dφ F F H H H±0.5 CR d φ±0.0 H2±0.5 Dφ F H H±0.5 CL d φ±0.0 Dφ F H CS Dφ F CZ Dφ F

13 Taping Specifications T-:Straight(φ-5φ) T-:Straight(φ-φ) T-:Straight(φ-3φ) Specification Information T-:Straight(φ-5φ) Code D L d P P0 P P2 F F W W0 W W2 H D0 I h Fig Tol. ±0.5 Max ±0.02 ±.0 ±0.2 ±0.7 ± ±0.5 Min ±0.5 Max ±0.2 Max Max (+) T- 2 Item 4 5-7(+) (+) (+.5) 0.5 T-:Straight(φ-φ) Code D L d P P0 P P2 F F W W0 W W2 H D0 h Fig Tol. ±0.5 Max ±0.02 ±.0 ±0.2 ±0.7 ±.3 Item 5 5-7(+) (+.5) 0.5 5(+) (+) 0.5 7(+)* 0.45 (+)* (+.5) ±0.5 Min ±0.5 Max ±0.2 Max T-2 T-:Straight(φ-3φ) Code D L d P P0 P P2 F W W0 W W2 H D0 h P t Fig Tol. ±0.5 Max ±0.02 ±.0 ±0.2 ±0.7 ± ±0.5 Min ±0.5 Max ±0.2 Max Max ± (+) 0.5 8(+)* (+.5)* 0.6 Item 9-20(+.5) (+.5) T-3 3

14 Taping Specifications T-:Forming(φ-8φ) T-:Straight(φ, φ) Specification Information T-:Forming(φ-8φ) Code D L d P P0 P P2 F W W0 W W2 H H0 D0 h P t Fig Tol. ±0.5 Max ±0.02 ±.0 ±0.2 ±0.3 ± ±0.5 Min ±0.5 Max ±0.5 ±0.2 Max Max ± (+) (+) Item (+) (+.5) (+) (+) 0.5 7(+)* (+)* (+.5) (+) (+.5)* (+.5) 0.5 T-4 T-:Straight(φ, φ) Code D L d P P0 P P2 F W W0 W W2 H D0 h t l Fig Tol. ± Max ±0.02 ±.0 ±0.2 ±0.7 ± ±0.5 Min ±0.5 Max ±0.2 Max ±0.3 Min 3 3~ ~ T-5 *: In this case, that is suitable for polymer. 4

15 Taping Specifications Part Number Ammo Package F Code (9th, 20th) TA TB TC TD TE Part Number Reel Package F Code (9th, 20th) RA RB RC RD RE Package Information Case Diameter Dφ(mm) Ammo Package Reel Package W A Quantity (pcs) W Quantity (pcs) Ammo Package Reel Package 5

16 Package for SMD Type Carrier tape Unit: mm φd 4x5.5 5x5.5 x5.5 x5.8 x7.7 8x6.5 8x7.7 8x.5 8x.7 x.5 x2.4 W P F A B T Reel Dφ A φd Quantity 4x pcs 5x pcs x pcs x pcs x pcs 8x pcs 8x pcs 8x pcs 8x pcs x pcs x pcs x pcs

17 Precautions & Guidelines FOR CONDUCTIVE POLYMER CAPACITORS CP-CAP is a solid aluminum capacitor with conductive polymer electrolyte. Please read the following points in order to take the most out of your CP-CAP. Designing device circuits. Circuits where CP-CAPs are prohibited to used The leakage current of conductive polymer solid aluminum capacitors may vary depending on thermal stresses. Please don t use solid capacitors in the following types of circuits: () High-impedance circuits that are to sustain voltages. (2) Coupling circuits (3) Time constant circuits In addition to the leakage current fluctuation, capacitance may also fluctuate depending on operational temperature and humidity. The fluctuation of the capacitance may cause problem if it is used as a time constant capacitor, which is extremely sensitive to the fluctuation of the capacitance. Do not use it as a time constant capacitance. (4) Other circuits that are significantly affected by leakage current. If you want to use 2 or more CP-CAPs in a series 2. Polarity connection, please contact us before use. The CP-CAP is a polarized solid aluminum electrolytic capacitor. Do not apply either reverse voltages or AC voltages to the polarized capacitors, using reverse polarity may cause a short circuit. Refer to the catalog, product specifications or capacitor body to confirm the polarity prior to use. 3. Applied voltage Do not apply DC voltages exceeding the full rated voltage. The peak voltage of superimposed AC voltages (ripple voltages) on DC voltages must not exceed the full rated voltage. While there are specifications for surge voltages exceeding the rated voltage, usage conditions apply, and continued operation for extended periods of time under such conditions cannot be guaranteed. Use the within 20% of the rated voltage for applications which may cause the reverse voltage during the transient phenomena when the power is turned off or the source is switched. 4. Ripple current Do not apply currents in excess of the rated ripple current. The superimposition of a large ripple current increases the rate of heating within the capacitor. This may reduce the service life of the capacitor or damage the capacitor. 5. Operating temperature Do not use the CP-CAP at high temperatures (temperatures exceeding the maximum temperature for the capacitor category) Use of the capacitor outside of the maximum temperature for the capacitor category may decrease the service life of the capacitor. 6. Sudden charge and discharge Do not use the CP-CAP in circuits where the capacitor is repetitively charged and discharged rapidly. Repetitively charging and discharging the capacitor rapidly may reduce the capacitance or may cause damage due to internal heating. Use of a protective circuit to ensure reliability is recommended when rush currents exceed A or the rush current is over times of allowable ripple current of CP-CAP. A protection resistor( kω) must be inserted to the circuit during the charge and discharge when measuring the leakage current. 7. Failures and life-span The CP-CAP failure rate in use is based on the failure rate level in the specification requirements. Upper category temperature and category voltage adhere to JIS C 5003 Standard. The confidence level is 60% and the failure rate is 7

18 Precautions & Guidelines 0.5%/,000 hours (applied rated voltage at category temperature). The failure modes mainly have 2 types as follows. () Contingency failure The contingency failure mainly has short circuit. The phenomenon of after short is on following. (i) In the event a short circuit causes the current to become relatively small(less than approximately A for φ,less than approximately 0.5A for φ8 and less than approximately 0.2A for smaller than φ ),the CP-CAP itself will generate a little heat, but its appearance will not be affected even when electricity is supplied continuously. However, if the short circuit current value exceeds the mentioned values above, the temperature inside the CP-CAP will increase, the internal pressure is raised, rubber sealing is turned over, and odorous gas is released. In this case, keep your face and hands away from the area. (ii) The electrolyte, electrolytic paper, sealing rubber, and plastic spacer used in the CP-CAP are all combustible. If an extremely large electric current flows through the capacitor after shorting, the shorted part may spark, and in a worst case scenario, may ignite. Ensure safety by fully considering the design issues described below when using this capacitor in equipment where safety is a priority. Increase safety by using in conjunction with a protective circuit or protective equipment. Install measures such as redundant circuits so that the failure of a part of the equipment will not cause unstable operation. (2) Performance characteristic and failure(life-span) CP-CAP characteristics can possibly change(capacitance reduction and ESR increase) within the specified range in specifications when it is used in the condition of rated voltage, electric and mechanical performance. When life span exceeded the specified guarantee time of endurance and damp heat, electric aharacteristic might change and cause electrolyte insulation. This is called open circuit mode. It is recommended to use the capacitor at a lower temperature than the maximum temperature for the capacitor category. 8. Circuit design Verify the following before designing the circuit: () The electrical characteristics of the capacitor will vary depending on differences in temperature and frequency. Only design your after verifying the scope of these factors. (2) When connecting two or more capacitors in parallel, ensure that the design takes current balancing into account. (3) When two or more capacitors are connected in series, variability in applied voltage may cause over-voltage conditions. Contact CapXon before using capacitors connected in series. 9. Capacitor usage environment Do not use/expose capacitors to the following conditions. () Oil, water, salty water, take care to avoid storage in damp locations. (2) Direct sunlight (3) Toxic gases such as hydrogen, sulfide, sulfurous acids, nitrous acids, chlorine and chlorine compounds, bromine and bromine compounds, ammonia, etc. (4) Ozone, ultraviolet rays and radiation. (5) Severe vibration or mechanical shock conditions beyond the limits advised in the product specification section of the catalog..capacitor mounting () For the surface mount capacitor, design the copper pads on the PC board in accordance with the catalog or the product specification (2) For radial capacitors, design the terminal holes on the PC board to fit the terminal pitch of the capacitor. 8

19 Precautions & Guidelines.Leakage current Heat pressure from soldering and mechanical stress from transportation may cause the leakage current to become large. In such a case, leakage current will gradually decrease by applying voltage less than or equal to the rated voltage at a temperature within the upper category temperature. In close conditions to the upper category temperature, the nearer the applied voltage is to the rated voltage, the faster the leakage current recovery speed is. Mounting precautions. Note () For the surface mount capacitor, design the copper pads on the PC board in accordance with the catalog or the product specification (2) For radial capacitors, design the terminal holes on the PC board to fit the terminal pitch of the capacitor. (3) Mount after checking the capacitance and the rated voltage. (4) Mount after checking the polarity. (5) Do not apply excessive external force to the lead terminal and the CP-CAP itself. (6) Ensure that the soldering conditions meet the specifications recommended by CapXon. Note that the leakage current may increase due to thermal stresses that occur during soldering, etc. Note that increased leakage currents gradually decrease when voltage is applied. 2. Soldering using a soldering iron: () The soldering conditions (temperature and time) are within the ranges specified in the catalog or product specifications. (2) The tip of the soldering iron does not come into contact with the capacitor itself. 3. Flow soldering () Do not dip the body of a capacitor into the solder bath only dip the terminals in. The soldering must be done on the reverse side of PC board. (2) Soldering conditions (preheat, solder temperature and dipping time) should be within the limits prescribed in the catalog or the product specifications. In regards to flow soldering, be sure to solder within the following conditions. Temperature Duration Flow number Preheating 20 or less (ambient temperature) 20 sec. or less time Soldering conditions or less + sec. or less Twice or less (3) Do not apply flux to any part of capacitors other than their terminals. (4) Make sure the capacitors do not come into contact with any other components while soldering. 4. Reflow soldering () Soldering conditions (preheat, solder temperature and soldering time) should be within the limits prescribed in the catalogs or the product specification. (2) The heat level should be appropriate. (Note that the thermal stress on the capacitor varies depending on the type and position of the heater in the reflow oven.) (3) Vapor phase soldering (VPS) is not used. (4) Except for the surface mount type, reflow soldering must not be used for the capacitors. (5) In the case of reflow soldering, capacitive static electricity may decrease after soldering even when the soldering conditions are within the required values. (6) Recommended reflow condition of SMD type. 9

20 Precautions & Guidelines C C C Voltage range 2.5 to v to v Preheat 50 to sec. max. Time maintained above 200 Time maintained above sec. max. 40 sec. max. Peak temp. 260 max 0 max Reflow number only time twice or less 60 sec. max. 40 sec. max. 0 max only time 50 sec. max. 30 sec. max. 240 max twice or less Note: All temperatures are measured on the topside of the Al-case and terminal surface. The leakage current value may increase(from a few μa to a few ma) even within the above conditions. When the CP-CAP is used in a DC circuit, the leakage current will decrease gradually through self-recovery after voltage is applied. If your reflow profile deviates from the above conditions for mounting the CP-CAP, please consult with CapXon. 5. Handling after soldering Do not apply any mechanical stress to the capacitor after soldering onto the PC board. () Do not lean or twist the body of the capacitor after soldering the capacitors onto the PC board (2) Do not use the capacitors for lifting or carrying the assembly board. (3) Do not hit or poke the capacitor after soldering to PC board. When stacking the assembly board, be careful that other components do not touch the aluminum electrolytic capacitors. (4) Do not drop the assembled board. 6. Washing the PC boards () Do not wash capacitors by using the following cleaning agents. Solvent resistant capacitors are only suitable for washing using the cleaning conditions prescribed in the catalog or the product specification. In particular, ultrasonic cleaning will accelerate damage to capacitors. Halogenated solvents; cause capacitors to fail due to corrosion. Alkali system solvents; corrode (dissolve) an aluminum case. Petroleum system solvents; cause the rubber seal material to deteriorate. Xylene; causes the rubber seal material to deteriorate. Acetone; erases the markings. (2) Verify the following points when washing capacitors. Monitor conductivity, ph, specific gravity and the water content of cleaning agents. Contamination adversely affects 20

21 Precautions & Guidelines these characteristics. Be sure not to expose the capacitors under solvent rich conditions or keep capacitors inside a closed container. In addition, please dry the solvent sufficiently on the PC board and the capacitor with an air knife (temperature should be less than the maximum rated category temperature of the capacitor) for minutes. Aluminum electrolytic capacitors can be characteristically and catastrophically damaged by halogen ions, particularly by chlorine ions, though the degree of the damage mainly depends upon the characteristics of the electrolyte and rubber seal material. When halogen ions come into contact with the capacitors, the foil corrodes when a voltage is applied. This corrosion causes an extremely high leakage current which results venting and an open circuit. Storage The following conditions for storage are recommend. () Store capacitors in a cool, dry place. Store at a temperature between 5 and 35, with a humidity of 75% or less. SMD products are sealed in a special laminated aluminum bag. Use all capacitors once the bag is opened. Return unused capacitors to the bag, and seal it with a zipper. Be sure to follow our recommendations for reflow soldering. (2) Store the capacitors in a location free from direct contact with water, salt water, and oil. (3) Store in a location where the capacitor is not exposed to toxic gas, such as hydrogen sulfide, sulfurous acid, nitrous acid, chlorine or chlorine compounds, bromine or other halogen gases, methyl bromide or other halogen compounds, ammonia, or similar. (4) Store in a location where the capacitor is not exposed to ozone, ultraviolet radiation, or other radiation. (5) It is recommended to store capacitors in their original packaging wherever possible. 2

22 Precautions & Guidelines For Aluminum Electrolytic Capacitors When you use aluminum electrolytic capacitors, remember the following..polarity Regular electrolytic Capacitor has polarity. Reverse voltage causes short circuit breakage of the capacitor or leakage of electrolyte. Where the polarity in a circuit sometimes reversed or unknown, a bi-polar capacitor should be used. 使用鋁電解電容器注意事項 :. 極性鋁電解電容器一般是有極性的, 極性反接是造成鋁電解電容器短路損壞及漏液的原因, 因此在無法辨識電氣迴路上之極性或使用於有極性變換設計之迴路時, 請選用無極性電解電容器 2.Overvoltage Do not apply overvoltage continuously. When overvoltage is applied to the capacitor, leakage current increase drastically. Applied working voltage to capacitors should not exceed the rated working voltage of capacitor. 2. 過載請勿連續施加過載電壓 當電壓過載時電解電容器的漏電流會急速增加, 所以電解電容器之工作電壓不應超過額定值 3.Operating temperature and life: Do not use the capacitor over the max operating temperature. Life time of the capacitor depends on the temperature. Generally, life time is doubled by decreasing each temperature. Use temperature as low as possible. 3. 使用溫度和壽命電解電容器之使用溫度請勿超出最高使用溫度之設定範圍 電解電容器的壽命取決於使用溫度, 一般來說當電解電容器之使用溫度降低 時, 其壽命將增為兩倍, 因此電解電容器應儘可能在較低溫度下使用 4.Vent It is recommended at least 3mm of space around the vent. If such space is not provided, the vent will not operate completely. 4. 防爆孔有防爆孔設計之電解電容器其使用時防爆孔側應與其它機構保持最少 3mm 以上之空間距離, 如此條件不能滿足的話, 防爆孔將無法正常運作 5.Ripple current Do not apply a ripple current exceeding the rated maximum ripple current. Applying too much ripple current to the capacitor causes great heat generation, invites deterioration of properties of cases breakage. Please consult factory if ripple current exceeds the specified limit. 5. 紋波電流請勿施加超過額定最高紋波電流容許值以上之紋波電流 施加過大紋波電流將使電解電容器的內溫異常上升, 引起電解電容器電氣特性劣化及破損 如有需要施加額定值以上之紋波電流等要求時, 請諮詢敝廠人員 6.Charge and discharging Frequent and quick charge/discharge generates heat inside the capacitor, causing increase of leakage current, decrease of capacitance, or breakage occasionally. Consult us for assistance in this application. 6. 充放電經常及快速的充放電將使電容器之內溫異常上升, 使漏電流增加 容量降低, 有時還會造成產品之損壞, 如對充放電有特殊要求時請諮詢敝廠人員 22

23 Precautions & Guidelines 7.Storage When the capacitor is stored for a long time without applying voltage, leakage current tends to increase. This returns to normal by applying the rated voltage to the capacitor before use. It is recommended to apply D.C. working voltage to the capacitor for 30 minutes through KΩ of protective series resistor, if it is stored for more than 6 months. The capacitor should he stored at a normal temperature and humidity. 7. 電解電容器的儲存當電解電容器經過長時間之放置後, 通常其漏電流有增大之傾向 因此在使用經過長時間放置後之電解電容器以前, 需先施加定額電壓使其電氣特性回復正常 ; 如儲存時間長於 6 個月以上時, 請串排 kω 之保護電阻後, 使其持續負載定額工作電壓 30 分鐘 另外電解電容器應儲存於常溫及常濕之環境下 8.Soldering Improper soldering may shrink or break the insulating sleeve and/or damage the internal element as terminals and lead wires conduct heat into the capacitor. Avoid too high a soldering temperature and/or too long a soldering time. 8. 焊錫不適當的焊錫溫度及時間可能造成表面膠管之異常收縮破裂, 有時高溫也會藉由導針及端子導熱至素子內部, 對產品造成不良影響, 因此須儘量避免過高溫度及過長時間之焊錫 9.Mechanical stress on the lead wire and the terminal Do not apply excessive force to the lead wire and the terminal. Do not move the capacitor after soldering to the PC board, not carry the PC hoard by picking up the capacitor. For their strength, refer to JIS C-54 and C 導針與端子之機械強度請勿施加過度之外力於導針及端子上 請勿扳開已焊接於 PC 板上之電解電容器, 更不要以電解電容器為施力點提起或移動整塊 pc 板.Cleaning of boards after soldering If the capacitor is cleaned in halogenated solvent for organic removing solder flux solvent, the solvent may penetrate into the inside of capacitor, and may generate corrosion.. 焊錫後之基板清洗如使用鹵化有機溶劑清洗基板, 溶劑有可能滲進電解電容器內部引起腐蝕.Sleeve material The standard sleeve matenal is polyvinyl-chloride. If exposed to xylene, toluene, etc, and then subjected to high heat, the sleeve may crack. This sleeve is not insulating material.. 套管材料一般使用之塑膠套膠材質多為聚氯乙烯 (PVC), 如塑膠管在浸漬二甲苯或甲苯後再放置於高溫下, 將產生破裂現象也同時失去了絕緣之功能 2.CapXon's Products meet quality standards specified by JIS-C54W and with the reliability requirements refer to JIS-C 本公司之產品品質符合 JIS-C-54W 指定標準, 其信賴性試驗方法依 JIS-C-52 之規範為基準 3.None of ozone depleting chemicals (ODC) under the Montreal Protocol is used in manufacturing process of CapXon Electronic Industrial CO., Ltd. 3. 本公司依蒙特利爾協議書之規定, 於生產過程中不使用破壞臭氧層之藥品 23

24 PL series PL series Low ESR 7mΩ Features Very Low ESR at high frequency range. Very Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Performance Characteristics -55~+5 2.5~ VDC 80 to 3500 F 20%(20Hz,+20 ) 0.2CV ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Endurance h at rated voltage Moisture Resistance Stored at 60 RH90~95% 2000h Capacitance Leakage current ESR Dissipation Factor Capacitance Leakage current ESR Dissipation Factor Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Diagram of Dimensions:(unit:mm) D L D+0.5max. F d

25 PL series Dimensions & Characteristics W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Conductive Polymer Ripple Current ( ma, rms ) at 5, 0KHz

26 PL series W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Size List RV (SV) Cap( F) (2.8) (4.6) (7.2) (.5) (8.4) 80 8x8 / 8x.5 8x.5 8x x8 / 8x.5 8x.5 8x x8 / 8x.5 8x.5 8x x8 / 8x.5 8x.5 8x.5 / x x8 / 8x.5 8x.5 x x8 / 8x.5 8x.5 x x8 / 8x.5 8x8 / 8x.5 8x8 / 8x.5 8x.5 x x8 / 8x.5 8x8 / 8x.5 8x.5 x2.5 x x8 / 8x.5 8x8 / 8x.5 / x2.5 8x.5 x2.5 x x.5 8x.5 x2.5 x x.5 8x.5 / x2.5 8x.5 / x x.5 x2.5 x x2.5 x2.5 x x2.5 x x x x x2.5 Ripple Current ( ma, rms ) at 5 0Hz 26

27 PS series PS series Standard Products Features Low ESR at high frequency range. Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Performance Characteristics Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Endurance h at rated voltage Capacitance Change Leakage current ESR -55~+5 2.5~ VDC 39 to 3500 F 20%(20Hz,+20 ) 0.2CV ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Conductive Polymer Dissipation Factor Not to exceed 50% of the value specified Capacitance Change Within 20% of the value before test Moisture Resistance Stored at 60 RH90~95% 2000h Leakage current ESR Not to exceed the value specified Not to exceed 50% of the value specified Dissipation Factor Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Diagram of Dimensions:(unit:mm) D L D+0.5max. F d

28 PS series Dimensions & Characteristics W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Ripple Current ( ma, rms ) at 5, 0KHz 28

29 PS series Dimensions & Characteristics W.V. V 20 Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Conductive Polymer Size List Ripple Current ( ma, rms ) at 5, 0KHz Cap( F) WV (SV) 2.5 (2.8) 4 (4.6) (7.2) (.5) (8.4) 20 (23) (27.5) 39 8x.5 8x x.5 8x x.5 8x x.5 8x.5 0 8x.5 x2.5 x x8 / 8x.5 8x.5 8x8 / 8x.5 x2.5 x x8 / 8x.5 8x.5 8x.5 x2.5 x x8 / 8x.5 8x.5 8x x8 / 8x.5 8x.5 8x.5 / x x8 / 8x.5 8x.5 x x8 / 8x.5 8x.5 x x8 / 8x.5 8x8 / 8x.5 8x.5 8x.5 x x8 / 8x.5 8x8 / 8x.5 8x.5 / x2.5 x2.5 x x8 / 8x.5 8x8 / 8x.5 / 8x8 / 8x.5 / x2.5 x2.5 x2.5 x x.5 8x.5 x2.5 x x.5 8x.5 / x2.5 8x.5 / x2.5 x x.5 x2.5 x x2.5 x2.5 x x2.5 x x x x x2.5 Ripple Current ( ma, rms ) at 5 0Hz 29

30 PU series PU series Ultra Low ESR 6mΩ Features Ultra Low ESR at high frequency range. Ultra Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Performance Characteristics -55~+5 2.5~ VDC 80 to 3500 F 20%(20Hz,+20 ) 0.2CV ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Endurance h at rated voltage Moisture Resistance Stored at 60 RH90~95% 2000h Capacitance Change Leakage current ESR Dissipation Factor Capacitance Change Leakage current ESR Dissipation Factor Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Diagram of Dimensions:(unit:mm) D L D+0.5max. F d

31 PU series Dimensions & Characteristics W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Conductive Polymer 3 Ripple Current ( ma, rms ) at 5, 0KHz

32 PU series Size List Cap( F) WV (SV) 2.5 (2.8) 4 (4.6) (7.2) (.5) 80 8x8 / 8x.5 8x x8 / 8x.5 8x x8 / 8x.5 8x x8 / 8x.5 8x x8 / 8x.5 8x x8 / 8x.5 8x.5 / x x8 / 8x.5 8x8 / 8x.5 8x8 / 8x.5 8x.5 / x x8 / 8x.5 8x8 / 8x.5 8x.5 / x2.5 8x.5 / x x8 / 8x.5 8x.5 / x2.5 8x.5 / x2.5 x x.5 8x.5 8x.5 / x2.5 x x.5 8x.5 / x2.5 8x.5 / x2.5 x x.5 / x2.5 x2.5 x x2.5 x2.5 x x2.5 x x x x x2.5 Ripple Current ( ma, rms ) at 5 0Hz 32

33 PX series PX series Low Profile Features Low profile Low ESR at high frequency range &.Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Performance Characteristics Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Endurance h at rated voltage Capacitance Change Leakage current ESR -55~+5 2.5~ VDC to 560 F 20%(20Hz,+20 ) Not to exceed the value specified ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Conductive Polymer Dissipation Factor Not to exceed 50% of the value specified Capacitance Change Within 20% of the value before test Moisture Resistance Stored at 60 RH90~95% 2000h Leakage current ESR Not to exceed the value specified Not to exceed 50% of the value specified Dissipation Factor Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Diagram of Dimensions:(unit:mm) D L D+0.5max. F d

34 PX series Dimensions & Characteristics W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Ripple Current ( ma, rms ) at 5, 0KHz

35 PX series W.V. V 20 Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) Conductive Polymer Ripple Current ( ma, rms ) at 5, 0KHz Size List WV (SV) Cap( F) 2.5 (2.8) 4 (4.6) (7.2) (.5) (8.4) 20 (23) (27.5) 4X5 X5.2 / X7 X5.2 / X7 X5.2 / X7 5 4X5 X5.2 / X7 X5.2 / X7 X5.2 / X7 22 4X5 X5.2 / X7 X5.2 / X7 X7 33 5X5 / X5.2 X5.2 / X7 X7 X7 39 5X5 / X5.2 X5.2 / X7 X7 X7 47 X5.2 / X7 X5.2 / X7 X7 68 X5.2 / X7 X5.2 / X7 82 X5.2 / X7 X7 0 4X5 / 5X5 5X5 X5.2 / X7 X5.2 / X7 X7 50 5X5 / X5.2 X5.2 / X7 X5.2 / X7 X7 80 5X5 / X5.2 X5.2 / X7 X7 X X5 / X5.2 X5.2 / X7 X7 X7 270 X5.2 / X7 X5.2 / X7 X7 330 X5.2 / X7 X5.2 / X7 X7 390 X7 X7 470 X7 X7 560 X7 Ripple Current ( ma, rms ) at 5 0Hz 35

36 PE series PE series Features Down Size to 8. Low ESR & large capacitance. Large permissible ripple current. Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Performance Characteristics -55~+5 2.5~ VDC 470 to 820 F 20%(20Hz,+20 ) 0.2CV ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Endurance h at rated voltage Moisture Resistance Stored at 60 RH90~95% 2000h Capacitance Change Leakage current ESR Dissipation Factor Capacitance Change Leakage current ESR Dissipation Factor Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Diagram of Dimensions:(unit:mm) D L D+0.5max. F d Dimensions & Characteristics W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) X8 Ripple Current ( ma, rms ) at 5, 0KHz 36

37 PM series PM series SMD type & Low Profile Features SMD type & Low profile Low ESR at high frequency range &.Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Performance Characteristics Operating Temperature Range -55~+5 Rated Voltage Range 2.5~ VDC Capacitance Range to 560 F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Endurance h at rated voltage Capacitance Change Leakage current ESR Dissipation Factor 20%(20Hz,+20 ) Not to exceed the value specified ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Conductive Polymer Capacitance Change Within 20% of the value before test Moisture Resistance Stored at 60 RH90~95% 2000h Leakage current ESR Not to exceed the value specified Not to exceed 50% of the value specified Dissipation Factor Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Recommended land pattern:(unit:mm) D L a b c Diagram of Dimensions:(unit:mm) D L W H C R P to to to to

38 PM series Dimensions & Characteristics W.V. V Capacitance L.C. tg ESR Maximum Permissible Ripple Size ( F) ( A,2min) (20Hz,20 ) (m,0khz) Current(mA,r.m.s) D L(mm) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Ripple Current ( ma, rms ) at 5, 0KHz

39 PM series W.V. V 20 Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) X X X X X X X X X X X X X X X X X X X X X X X7.7 Ripple Current ( ma, rms ) at 5, 0KHz Conductive Polymer Size List WV (SV) Cap( F) 2.5 (2.8) 4 (4.6) (7.2) (.5) (8.4) 20 (23) (27.5) 4X5.5 X5.8 / X7.7 X5.8 / X7.7 X5.8 / X X5.5 X5.8 / X7.7 X5.8 / X7.7 X5.8 / X X5.5 X5.8 / X7.7 X5.8 / X7.7 X X5.5 / X5.8 X5.8 / X7.7 X7.7 X X5.5 / X5.8 X5.8 / X7.7 X7.7 X X5.8 / X7.7 X5.8 / X7.7 X X5.8 / X7.7 X5.8 / X X5.8 / X7.7 X X5.5 / 5X5.5 5X5.5 X5.8 / X7.7 X5.8 / X7.7 X X5.5 / X5.8 X5.8 / X7.7 X5.8 / X7.7 X X5.5 / X5.8 X5.8 / X7.7 X7.7 X X5.5 / X5.8 X5.8 / X7.7 X7.7 X X5.8 / X7.7 X5.8 / X7.7 X X5.8 / X7.7 X5.8 / X7.7 X X7.7 X X7.7 X X7.7 Ripple Current ( ma, rms ) at 5 0Hz 39

40 PD series PD series SMD type & Large capacitance Features SMD type & Large capacitance Ultra low ESR at high frequency range &.Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Performance Characteristics -55~+5 2.5~ VDC 39 to 3300 F 20%(20Hz,+20 ) Not to exceed the value specified ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Endurance h at rated voltage Moisture Resistance Stored at 60 RH90~95% 2000h Capacitance Change Leakage current ESR Dissipation Factor Capacitance Change Leakage current ESR Dissipation Factor Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Recommended land pattern:(unit:mm) D L a b c 8X X Diagram of Dimensions:(unit:mm) D L W H C R P 8X to. 3.2 X to

41 PD series Dimensions & Characteristics W.V. V Capacitance L.C. tg ESR Maximum Permissible Ripple Size ( F) ( A,2min) (20Hz,20 ) (m,0khz) Current(mA,r.m.s) D L(mm) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X2.4 Conductive Polymer 4 Ripple Current ( ma, rms ) at 5, 0KHz

42 PD series W.V. V Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) X X X X X X X2.4 Ripple Current ( ma, rms ) at 5, 0KHz Size List Cap( F) WV (SV) 2.5 (2.8) 4 (4.6) (7.2) (.5) (8.4) 20 (23) (27.5) 39 8X.7 8X X.7 8X X.7 8X X.7 8X.7 0 X2.4 X X.7 8X.7 8X.7 X2.4 X X.7 8X.7 8X.7 X X.7 8X.7 8X X.7 8X.7 8X.7 / X X.7 8X.7 X X.7 8X.7 X X.7 8X.7 8X.7 8X.7 X X.7 8X.7 8X.7 / X2.4 X2.4 X X.7 8X.7 8X.7 / X2.4 X2.4 X X.7 8X.7 X2.4 X X.7 8X.7 X2.4 X X.7 X2.4 X X2.4 X2.4 X X2.4 X X X X2.4 Ripple Current ( ma, rms ) at 5 0Hz 42

43 PV series PV series SMD type & Low height Features SMD type, Low height & Large capacitance Low ESR at high frequency range &.Large permissible ripple current. Long life and high reliability(reliability: 0.% / 00Hrs). Specifications Item Performance Characteristics Operating Temperature Range -55~+5 Rated Voltage Range 2.5~ VDC Capacitance Range 39 to 00 F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) ESR 0K~300KHz Endurance h at rated voltage Capacitance Change Leakage current ESR Dissipation Factor 20%(20Hz,+20 ) Not to exceed the value specified ( A, after 2 minutes) Not to exceed the value specified Not to exceed the value specified Within 20% of the value before test Not to exceed the value specified Not to exceed 50% of the value specified Not to exceed 50% of the value specified Conductive Polymer Capacitance Change Within 20% of the value before test Moisture Resistance Stored at 60 RH90~95% 2000h Leakage current ESR Not to exceed the value specified Not to exceed 50% of the value specified Dissipation Factor Not to exceed 50% of the value specified Frequency Coefficient for Ripple Current Frequency 20Hz freq.<khz KHz freq.<khz KHz freq.<0khz 0KHz freq.<300khz Coefficient Recommended land pattern:(unit:mm) D L a b c 8X X X X Diagram of Dimensions:(unit:mm) D L W H C R P 8X to X to. 3.2 X to. 4.6 X to

44 PV series Dimensions & Characteristics W.V. V Capacitance L.C. tg ESR Maximum Permissible Ripple Size ( F) ( A,2min) (20Hz,20 ) (m,0khz) Current(mA,r.m.s) D L(mm) X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Ripple Current ( ma, rms ) at 5, 0KHz

45 PV series W.V. V 20 Capacitance ( F) L.C. ( A,2min) tg (20Hz,20 ) ESR (m,0khz) Maximum Permissible Ripple Current(mA,r.m.s) Size D L(mm) X X X X X X X X X X X X X X X X X X X X X X X.5 Ripple Current ( ma, rms ) at 5, 0KHz Conductive Polymer Size List WV (SV) Cap( F) 2.5 (2.8) 4 (4.6) (7.2) (.5) (8.4) 20 (23) (27.5) 39 8X7.7 / 8X.5 8X7.7 / 8X X7.7 / 8X.5 8X7.7 / 8X X7.7 / 8X.5 8X7.7 / 8X X7.7 / 8X.5 8X7.7 / 8X.5 0 8X7.7 / 8X.5 8x.5 / X x.5 / X7.7 X X7.7 8X7.7 8X7.7 / 8X.5 X7.7 / X X7.7 8X7.7 8X7.7 / 8X.5 X X7.7 8X7.7 8x.5 / X X7.7 / 8X.5 8X7.7 8x.5 / X X7.7 / 8X.5 8X7.7 X X7.7 / 8X.5 8X.5 X X7.7 8X7.7 / 8X.5 8X7.7 / 8X.5 X X7.7 8X7.7 / 8X.5 8x.5 / X7.7 X X7.7 8X7.7 / 8X.5 X7.7 / X.5 X X7.7 8X.5 X7.7 / X X.5 X7.7 / X.5 X X7.7 X7.7 / X X7.7 X.5 00 X.5 Ripple Current ( ma, rms ) at 5 0Hz 45

46 EV series EV Series High CV Features Chip type long life capacitance in large case sizes Chip type with load life of 00 hours at +5 Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape For detail specifications, please refer to Engineering Bulletin NO.E59 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Resistance to soldering heat Impedance ratio max Performance Characteristics -40~ +5 ~50 VDC 0. to 500 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measured with rated working voltage applied. Working voltage(vdc) D.F.(%)max Working voltage(vdc) Z- / Z-40 / Test condition :00 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : Within % of initial value for capacitance of V or less Within 20% of initial value for capacitance of V or more Dissipation factor : Less than 200% of specified value Leakage current : Less than specified value Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The capacitors shall be kept on the hot plate maintained at 0 for 30 seconds. After removing form the hot plate and restored at room temperature, they meet the characteristic requirements listed under. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0.8 0~00 F Diagram of Dimensions:(unit:mm) K.30.5 K Cathode D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

47 EV series Case Size Cap( F) WV(SV) (8) (3) (20) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4X X X X X X X X5.5 4X5.5 5X X X X X X X X X X X X (32) 35 (44) 50 (63) 4X5.5 X X X X X X X X X X5.5 5 X X X X X X X X7.7 2 X X X6.5 5 X X X7.7 9 X X X X X X X X.5 55 X.5 80 X X.5 55 X.5 90 X X X.5 75 X X X X6.5 5 X X.5 2 8X.5 2 8X.5 2 X X X X.5 3 SMD Ripple Current ( ma, rms ) at 5 20Hz 47

48 LV series LV Series Features 85 standard, case diameter 4~ mm Reflow soldering is available Available for high density mounting For detail specifications, please refer to Engineering Bulletin No. E30 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Impedance ratio max Performance Characteristics -40~ +85 4~50 VDC 0. to 500 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied Rated voltage(vdc) D.F.( ) 4~ max 8~ Rated voltage(vdc) Z- AZ+20 Z-40 AZ Load Life Shelf Life Resistance to soldering heat Test conditions :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 : Capacitance change :Within % of the initial value Dissipation factor :Not more than 200% of specified value Leakage current :Not more than the specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The capacitors shall be kept on the hot plate maintained at 0 for 30 seconds. After removing form the hot plate and restored at room temperature, they meet the characteristic requirements listed under. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0.8 0~00 F K.30.5 K Diagram of Dimensions:(unit:mm) Cathode D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

49 LV series Case Size WV (SV) 4 (5) (8) (3) (20) (32) 35 (44) 50 (63) Cap(μF) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X5.5 0 X X X X X X5.5 6 X7.7 4 X X X X X X X X X X X X X X X X X X X X X X X X.5 4 X X X X X X X X X.5 4 X X X SMD Ripple Current ( ma, rms ) at 85 20Hz 49

50 HV Series HV Series Features Long life of 2000 hrs at 5 Reflow soldering is available Available for high density mounting For detail specifications, please refer to Engineering Bulletin No. E3 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Performance Characteristics -40~ +5 ~50 VDC 0. to 500 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied Dissipation Factor (tan at 20 20Hz) Rated voltage(vdc) D.F. ( ) max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- AZ+20 Z-40 AZ Load Life Shelf Life Resistance to soldering heat Test conditions :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 : Capacitance change :Within 30% of the initial value Dissipation factor :Not more than 300% of specified value Leakage current :Not more than the specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The capacitors shall be kept on the hot plate maintained at 0 for 30 seconds. After removing form the hot plate and restored at room temperature, they meet the characteristic requirements listed under. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0~00 F K.30.5 K Diagram of Dimensions:(unit:mm) Cathode D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

51 HV Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap(μF) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4X X X X X X X X X X X X X X X X5.5 4X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X7.7 X X X X X.5 0 8X.5 80 X X X X7.7 8X X6.5 8X X X.5 90 X X X X X X.5 0 8X X X.5 85 X.5 90 X X X X X X.5 0 8X X X.5 2 8X X X X X X.5 3 X X X X X X X X X SMD Ripple Current ( ma, rms ) at 5 20Hz 5

52 JV Series JV Series Long Life, High CV Features Chip type long life capacitance in large case sizes Chip type with load life of 3000 hours at +5 Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape For detail specifications, please refer to Engineering Bulletin NO.E55 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Resistance to soldering heat Performance Characteristics -40~+5 ~50 VDC 0. to 00 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A)After 2 minutes whichever is greater measured with rated working voltage applied. Working Voltage(VDC) D.F.(%)max Impedance ratio max (at: 20Hz) Working voltage(vdc) Z- / Z-40 / Test condition Ambient temperature Applied voltage : 3000 Hrs :+5 :Rated DC working voltage After test requirement at +20 Capacitance change : Within 30% of initial value Dissipation factor : Less than 300% of specified value Leakage current : Less than specified value Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The following specifications shall be satisfied when the capacitors are restored to20 after exposing them at 0 for 30 seconds. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0.8 0~00 F Diagram of Dimensions:(unit:mm) K.30.5 K Cathode D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

53 JV Series Case Size Cap( F) WV(SV) (8) (3) (20) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4X X X X X X X X5.5 4X5.5 5X X X X X X X X5.5 3 X X X X X X X X X X X X5.5 5 X X X X X7.7 8 X X.5 8 X.5 55 X X X.5 42 X X X (32) 330 8X X X X X X X X (44) 50 (63) SMD Ripple Current ( ma, rms ) at 5 20Hz 53

54 MV Series MV Series Chip type,long Life, High CV Features Chip type long life capacitance in large case sizes Chip type with load life of 5000 hours at +5 Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape Complied to the RoHS directive For detail specifications, please refer to Engineering Bulletin NO. E56 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Resistance to soldering heat Performance Characteristics -40~+5 ~50 VDC 0. to 00 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A)After 2 minutes whichever is greater measured with rated working voltage applied. Working Voltage(VDC) D.F.(%)max Impedance ratio max (at: 20Hz) Working voltage(vdc) Z- / Z-40 / Test condition Ambient temperature Applied voltage : 5000 Hrs :+5 :Rated DC working voltage After test requirement at +20 Capacitance change : Within 30% of initial value Dissipation factor : Less than 300% of specified value Leakage current : Less than specified value Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The following specifications shall be satisfied when the capacitors are restored to20 after exposing them at 0 for 30 seconds. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0.8 0~00 F Diagram of Dimensions:(unit:mm) K.30.5 K Cathode D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

55 MV Series Case Size Cap( F) WV(SV) (8) (3) (20) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4X X X X X X X X X X X X X5.5 X X X X X X X X X X X X X X X X X X X X X X X.5 X.5 50 X X7.7 8X.5 40 X.5 2 X X (32) 330 8X.5 0 X X X X X X X (44) 50 (63) SMD Ripple Current ( ma, rms ) at 5 20Hz 55

56 NV Series NV Series Features 85 Non-polarized Reflow soldering is available Available for high density mounting For detail specifications, please refer to Engineering Bulletin No.E32 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Performance Characteristics -40~ +85 ~50 VDC 0. to 560 F 20%(20Hz,+20 ) 0.05 CV or ( A) After 2 minutes, whichever is greater measured with rated working voltage applied Dissipation Factor (tan at 20 20Hz) Rated voltage(vdc) D.F. (%) max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- AZ+20 Z-40 AZ Load Life Shelf Life Test conditions :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 : Capacitance change :Within % of the initial value Dissipation factor :Not more than 200% of specified value Leakage current :Not more than the specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The capacitors shall be kept on the hot plate maintained at 0 for 30 seconds. After removing form the hot plate and restored at room temperature, they meet the characteristic requirements listed under. Resistance to soldering heat Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 60(50) K.30 K.50 Diagram of Dimensions:(unit:mm) D L A B C W 0.5~ ~ ~ ~ ~ ~. P

57 NV Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap(μF) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4X X X X X X X X X X X5.5 4X X X5.5 5X X X5.5 4X X X5.5 5X5.5 8 X X X X X X X X X X X X X X X X X X X X5.5 4 X X X X.5 58 X X X X7.7 5 X X X X.5 64 X X X X X X.5 0 8X X X.5 50 X X.5 0 X X X SMD Ripple Current ( ma, rms ) at 85 20Hz 57

58 KV Series KV Series Features 85 Low leakage curvent case diameter 4 ~ 8 Reflow soldering is available Available for high density mounting For detail specifications, please refer to Engineering Bulletin No.E34 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Resistance to soldering heat Impedance ratio max Performance Characteristics -40~ +85 ~50 VDC 0. to 330 F 20%(20Hz,+20 ) I CV or 0.4 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied Working voltage(vdc) D.F. (%) max. Working voltage(vdc) Z - AZ +20 Z -40 AZ +20 Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 : Capacitance change :Within % of the initial value Dissipation factor :Not more than 200% of specified value Leakage current :Not more than the specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The capacitors shall be kept on the hot plate maintained at 0 for 30 seconds. After removing form the hot plate and restored at room temperature, they meet the characteristic requirements listed under. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0~00 F K.3.5 K.5.2 Diagram of Dimensions:(unit:mm) D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

59 KV Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap(μF) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x x x x x x x x5.5 4x x x5.5 4x5.5 4x5.5 8 x x x x x x x x x x x x x x x x5.5 4 x x x x x x x x x x x x x x x x x x x x x7.7 2 x7.7 8x6.5 8x x x SMD Ripple Current ( ma, rms ) at 85 20Hz 59

60 ZV Series ZV Series Features Low impedence 0 KHz Reflow soldering is available Available for high density mounting Load life 2000 hrs at 5 For detail specifications, please refer to Engineering Bulletin No.E35 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Resistance to soldering heat Performance Characteristics -55~ +5 ~50 VDC to 500 F 20%(20Hz,+20 ) 0.0CV or 3( A) After 2 minutes, whichever is greater measured with rated working voltage applied Working voltage(vdc) D.F. (%) max. Impedance ratio max Working voltage(vdc) Z- AZ+20 Z-55 AZ+20 Test conditions Ambient temperature Applied voltage :2000 Hrs :+5 :Rated DC working voltage After test requirements at +5 : Capacitance change : % of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The capacitors shall be kept on the hot plate maintained at 0 for 30 seconds. After removing form the hot plate and restored at room temperature, they meet the characteristic requirements listed under. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) CAP CAP K K K-0K.0.0 Diagram of Dimensions:(unit:mm) D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

61 ZV Series Case Size WV Cap (µf) (SV) (8) (3) (20) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance.0 4X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X5.5.5 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X (32) 35 (44) 50 (63) SMD Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0 KHz 6

62 DV Series DV Series Chip type Features Chip type,low impedance Chip type with load life of 2000 hours at +5 Designed for surface mounting on high density PC board Applicable to automatic mounting machine using carrier tape Complied to the RoHS directive For detail specifications, please refer to Engineering Bulletin NO. ZV Low Impedance DV Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Performance Characteristics -55~ +5 ~50 VDC to 500 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A)After 2 minutes whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working voltage(vdc) D.F. (%) max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working voltage(vdc) Z- +20 Z Load Life Shelf Life Resistance to soldering heat Test conditions Ambient temperature Applied voltage :2000 Hrs :+5 :Rated DC working voltage After test requirements at +20 : Capacitance change :Within 30% of initial value Dissipation factor :Less than 300% of specified value Leakage current :Less than specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The following specifications shall be satisfied when the capacitors are restored to20 after exposing them at 0 for 30 seconds. Leakage current Capacitance change tan Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) CAP CAP K K K-0K.0.0 Diagram of Dimensions:(unit:mm) D L A B C W 0.5~ ~ ~ ~ ~ ~. 0.7~. P

63 DV Series Case Size WV Cap (µf) (SV) (8) (3) (20) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance.0 4X X X X X X X X X X X X X X5.5.4 X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X (32) 35 (44) 50 (63) SMD 00 8X X X X X Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0 KHz 63

64 TV Series TV Series High Temperature Features Chip type,operating temperature range-40 to + Designed for surface mounting on high density PC board Applicable to automatic insertion machine using carrier tape For detail specifications, please refer to Engineering Bulletin NO. E57 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Resistance to soldering heat Leakage current Capacitance change tan Performance Characteristics -40~+ ~50 VDC to 330 F 20%(20Hz,+20 ) I 0.03 CV or 4 ( A)After minutes whichever is greater measured with rated working voltage applied. Working Voltage(VDC) D.F.(%)max Impedance ratio max Working voltage(vdc) Z- / Test condition : 00 Hrs ( 8X6.5mm & X7.7mm) ; 2000Hrs ( 8X.5mm & X.5mm) Ambient temperature :+ Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : Within 30% of initial value Dissipation factor : Less than 300% of specified value Leakage current : Less than specified value Test condition :00 Hrs Ambient temperature :+ Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. The following specifications shall be satisfied when the capacitors are restored to20 after exposing them at 0 for 30 seconds. Less than specified value Within % of initial value Less than specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~47 F 0.8 0~00 F Diagram of Dimensions:(unit:mm) K.30.5 K D 8 8 L A B C W 0.5~ ~ ~. 0.7~. P Cathode 64

65 TV Series Case Size WV(SV) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple X X X X X X X X X X.5 52 X X X X X.5 74 X X.5 90 X.5 2 X X.5 2 SMD Ripple Current ( ma, rms ) at 20Hz 65

66 SS Series SS Series 5 mm 85 Features Design for space-saving and high density insertion. 4WV products are standardized for recent battery power source devices. Low price compared to Tantalum capacitors. Applications: VTR, car radio and commercial applications. For detail specifications, please refer to Engineering Bulletin No. E8 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40 to to 50 VDC 0. to 330 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After minute, whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- Z+20 Z-40 Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) 0.~68 F 0~330 F K.30.5 K Diagram of Dimensions:(unit:mm) D F d

67 SS Series Case Size WV (SV) 4 (5) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 3x5.0 4x x5.8 4x x x x x x x x x x x x x x x x x x x5 4x5 4 4x5 4x x5 3x5 2 4x5 8 5x5 20 4x5 4x x5 9 3x5 4x5 7 5x5 20 x5 4x5 4x5 3 3x5 9 3x5 3 3x5 5 3x5 8 4x5 27 5x5 29 x5 30 4x5 4x5 4 4x5 7 4x5 20 5x x5 7 4x5 7 4x5 2 5x5 26 5x5 30 x5 33 x5 37 x x5 9 3x5 2 4x5 30 4x5 33 x5 44 x5 46 x5 48 4x5 2 4x5 24 5x5 33 5x5 35 8x x5 26 4x5 33 5x5 39 5x5 42 x5 52 8x5 63 8x5 70 4x5 28 5x5 37 x x5 33 5x5 39 5x5 42 x5 58 x5 62 8x5 83 x x5 43 x5 53 x5 56 x5 65 8x5 90 x x5 52 x5 65 x5 76 x5 86 8x5 8 8x x5 78 x5 90 8x5 38 8x x5 42 8x5 45 Ripple Current ( ma, rms ) at 85 20Hz Radial 67

68 ST Series ST Series 5 mm 5 Features 5.0+ mm max height Load life 5, 00 hrs assured For detail specifications, please refer to Engineering Bulletin No. E2 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40 to +5 4 to 50 VDC 0. to 0 F 20% (20Hz, +20 ) 0.0 CV or 3 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage (VDC) Z- / Z+20 Z-40 / Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) 0.~47 0~ K.30.5 K Diagram of Dimensions:(unit:mm) D F d

69 ST Series Case Size WV (SV) 4 (5) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 3x5.0 4x x5.8 4x x x x x x x x x5 5 3x x x x x x5 8 4x x x x5 9 4x5 4 4x x x5 9 3x5 4x5 5 5x5 9 4x5 9 4x x5 4x5 3 4x5 5 5x5 9 5x5 22 4x5 x5 3x5 3x5 2 4x5 5 4x5 8 5x5 23 5x5 x5 30 4x5 4x x5 3 4x5 5 4x5 8 5x5 23 x5 32 x5 32 8x x5 22 4x5 22 5x5 27 5x5 30 x5 39 x5 48 8x x5 30 5x5 30 5x5 35 x5 45 x5 48 8x x5 36 5x5 36 x5 48 x5 50 x5 50 8x x5 52 x5 52 x5 53 8x x5 60 x5 60 8x5 65 8x x5 80 x5 80 8x5 83 Radial Ripple Current ( ma, rms ) at 5 20Hz 69

70 SA Series SA Series 5 mm, Low Leakage Current 85 Features Low leakage current, height 5 mm For detail specifications, please refer to Engineering Bulletin No. E36 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to to 50 VDC 0. to 0 F 20%(20Hz,+20 ) I CV or 0.4 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Low Temperature Characteristics (at 20Hz) Impedance ratio max Working Voltage (VDC) Z-40 / Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) 0.~ K.30.5 K Diagram of Dimensions:(unit:mm) D F d

71 SA Series Case Size WV (SV) 4 (5) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x x x x x x x x5 4x5 8 5x5 20 4x5 5x5 27 5x5 29 x x5 28 4x5 32 5x5 37 x5 42 x5 46 8x x5 28 5x5 37 5x5 4 x5 49 x x5 33 5x5 45 x5 52 x x5 56 x5 70 Ripple Current ( ma, rms ) at 85 20Hz Radial 7

72 SP Series SP Series 5 mm, Non-polar 85 Features Non-polarized with 5 mm for crossover networks of height-pitched, mean and low pitched sounds in high-fidelity sound systems. The series offers excellent frequency characteristics and minimal capacitance deviation with frequency. For detail specifications, please refer to Engineering Bulletin No. E8 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40 to +85 to 50 VDC 0. to 47 F 20% (20Hz, +20 ) I 0.05 CV or ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage (VDC) Z- / Z+20 Z-40 / Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage to each polarity for 500 Hrs After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

73 SP Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x x x x5 4 4x x x x5 5x5 3 5x5 4 5x x5 2 5x5 5 5x5 x5 8 4x5 5 4x5 5x5 23 x5 x5 28 5x x5 27 x5 32 x x5 35 x5 40 x x5 44 Ripple Current ( ma, rms ) at 85 20Hz Radial 73

74 SM Series SM Series 7 mm 85 Standard Features Design for space-saving and high density insertion. Applications: VTR, car radio, car stereos, charger, etc. For detail specifications, please refer to Engineering Bulletin No. E4 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to to 63 VDC 0. to 470 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After minute, whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage (VDC) Z- / Z+20 Z-40 / Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) CAP CAP 0 0 CAP 00 60(50) K K K-0K Diagram of Dimensions:(unit:mm) D F d

75 SM Series Case Size WV (SV) 4 (5) (8) (3) (20) (32) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 4.7 4x7 5 4x x7 20 4x7 22 4x7 28 4x x7 28 4x7 32 4x7 35 5x x7 35 4x7 36 4x7 40 4x7 46 5x7 38 5x7 42 5x x7 33 4x7 40 4x7 43 4x7 45 5x7 52 5x7 42 5x7 45 5x7 55 x x7 35 4x7 46 4x7 50 5x7 65 x7 7 5x7 48 5x7 58 x x7 42 5x7 50 5x7 60 x7 70 x x7 55 5x7 75 5x7 82 x7 98 8x7 3 5x7 6 x7 80 x7 90 8x x7 72 x7 82 x7 95 8x7 8x x7 x7 20 x7 36 8x7 52 8x7 33 8x x7 20 8x7 0 8x7 82 8x x7 235 Radial WV (SV) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple 0. 4x7.3 4x x7 2 4x x7 3 4x x x x7 5 4x x x7 8 4x7 4x x7 3 4x x7 7 4x x7 8 4x7 23 5x x7 22 4x7 24 5x7 30 5x7 26 x x7 5x7 28 x7 3 4x7 3 5x7 35 x7 48 5x7 33 x x7 37 x7 42 8x x7 47 x7 59 8x7 65 x7 55 8x x7 65 8x7 75 8x x7 85 8x x x7 9 Ripple Current ( ma, rms ) at 85 20Hz 75

76 SH Series SH Series 7 mm 85 Long Life Features Long life 2000 hrs. Design for space-saving and high density insertion. Applications: VTR, car radio, car stereos, charger, etc. For detail specifications, please refer to Engineering Bulletin No. E37 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to to 63 VDC 0. to 470 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After minute, whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage (VDC) Z- / Z+20 Z-40 / Z Load Life Shelf Life Test conditions :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 60(50) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

77 SH Series Case Size WV (SV) 4 (5) (8) (3) (20) (32) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 4.7 4x x7 20 4x7 2 4x7 30 4x7 30 5x x7 28 4x7 32 5x x7 23 4x7 3 4x7 35 4x7 37 5x7 45 5x7 42 x x7 26 4x7 32 4x7 40 4x7 45 5x7 52 5x7 35 5x7 45 5x7 50 x x7 35 4x7 40 4x7 47 5x7 6 x7 68 5x7 47 5x7 5 x7 67 8x x7 55 5x7 55 5x7 60 x7 72 x7 75 x x7 58 5x7 65 5x7 80 x7 95 8x7 5 x7 75 x7 90 8x x7 65 x7 70 x7 5 8x7 90 8x7 330 x7 90 8x x7 20 Radial WV (SV) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple 0. 4x7.5 4x x7.8 4x x x x x x7 5 4x x7 7 4x7 7 4x7 4x x7 3 4x x7 9 4x x7 24 5x x7 22 4x7 27 5x7 29 5x7 29 x x7 24 5x7 32 x7 35 5x7 28 x7 33 4x7 30 5x7 35 x7 40 5x7 35 x x7 38 x7 52 8x7 55 x x7 50 x7 60 8x7 65 x7 58 8x x7 54 8x7 78 8x x x7 85 Ripple Current ( ma, rms ) at 85 20Hz 77

78 SK Series SK Series 7 mm Standard 5 Features Design for space-saving and high density insertion. Applications: VTR, car radio, car stereos. charger, etc. For detail specifications, please refer to Engineering Bulletin No. E5 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to +5 4 to 63 VDC 0. to 470 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After minute, whichever is greater measured with rate working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage (VDC) Z- / Z+20 Z-40 / Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

79 SK Series Case Size WV (SV) 4 (5) (8) (3) (20) (32) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 4.7 4x x7 20 4x7 2 4x7 30 4x7 30 5x x7 28 4x7 32 5x x7 23 4x7 3 4x7 35 4x7 37 5x7 45 5x7 42 x x7 26 4x7 32 4x7 40 4x7 45 5x7 52 5x7 35 5x7 45 5x7 50 x x7 35 4x7 40 4x7 47 5x7 6 x7 68 5x7 47 5x7 5 x7 67 8x x7 55 5x7 55 5x7 60 x7 72 x7 75 x x7 58 5x7 65 5x7 80 x7 95 8x7 5 x7 75 x7 90 8x x7 65 x7 90 x7 5 8x7 20 8x x7 90 8x x7 20 Radial WV (SV) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple 0. 4x7.5 4x x7.8 4x x x x x x7 5 4x x7 7 4x7 7 4x7 4x x7 3 4x x7 9 4x x7 24 5x x7 22 4x7 27 5x7 29 5x7 29 x x7 24 5x7 32 x7 35 5x7 28 x7 33 4x7 30 5x7 35 x7 40 5x7 35 x x7 38 x7 52 8x7 55 x x7 50 x7 60 8x7 65 x7 58 8x x7 54 8x7 78 8x x x7 85 Ripple Current ( ma, rms ) at 5 20Hz 79

80 SJ Series SJ Series 7 mm 5 Long Life Features Design for space-saving and high density insertion. Applications: VTR, car radio, car stereos, charger, etc. For detail specifications, please refer to Engineering Bulletin NO. E46 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to +5 to 63 VDC 0. to 220 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After minute, whichever is greater measured with rate working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage (VDC) Z- / Z+20 Z-40 / Z Load Life Shelf Life Test conditions :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

81 SJ Series Case Size WV (SV) (8) (3) (20) (32) Cap( F) Size Size Ripple Ripple Size Ripple Size Ripple 4.7 4x x7 9 4x7 9 4x7 28 4x7 28 5x x7 26 4x7 30 5x x7 28 4x7 32 4x7 35 5x7 43 5x7 42 x x7 32 5x7 48 5x7 50 x7 62 5x x7 47 5x7 5 x7 67 8x x7 50 x7 68 x7 70 8x7 80 8x x7 75 x7 80 8x7 8x7 5 8x x7 92 8x7 30 WV (SV) 35 (44) 50 (63) 63 (79) Cap( F) Size Size Ripple Ripple Size Ripple 0. 4x7.5 4x x7.8 4x x x x x x7 5 4x x7 7 4x7 7 4x7 4x x7 3 4x x7 20 4x x7 26 5x x7 22 4x7 27 5x7 29 5x7 29 x x7 24 5x7 32 x7 35 5x7 28 x7 33 5x7 35 x7 38 x x7 38 x7 52 8x7 55 x x7 60 8x7 63 8x x7 50 8x7 78 8x x x7 85 Radial Ripple Current ( ma, rms ) at 5 20Hz 8

82 SL Series SL Series 7 mm, Low Leakage Current 85 Features Low leakage current, height 7 mm For detail specifications, please refer to Engineering Bulletin No. E20 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40 to +85 to 50 VDC 0. to 220 F 20% (20Hz, +20 ) I CV or 0.4 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max Low Temperature Characteristics (at 20Hz) Impedance ratio max Working Voltage (VDC) Z-40 / Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

83 SL Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x x x x x x x x7 2 5x7 4x7 5x7 30 5x7 33 x x7 3 5x7 35 5x7 40 x7 48 x7 52 8x x7 40 5x7 44 x7 53 x7 59 8x x7 48 x7 55 x7 60 8x x7 70 8x7 90 8x x7 Ripple Current ( ma, rms ) at 85 20Hz Radial 83

84 SD Series SD Series 7 mm, Low Leakage Current 5 Features 5 Low leakage current, height 7 mm For detail specifications, please refer to Engineering Bulletin No. E22 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Dissipation Factor (tan at 20 20Hz) Performance Characteristics 40 to +5 4 to 63 VDC 0. to 0 F 20% (20Hz, +20 ) I CV or 0.4 ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- Z+20 Z-40 Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value (4V : 30%) Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency Hz 50(60) 0.~ ~ K.30.5 K Diagram of Dimensions:(unit:mm) D F d

85 SD Series Case Size WV (SV) 4 (5) (8) (3) (20) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x7 36 4x x7 33 4x7 4 5x7 44 5x x7 39 5x7 49 x7 54 x x7 59 x7 75 8x7 90 WV (SV) (32) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x7 3 4x x7 5 4x x7 6 4x x7 7 4x x7 4x x7 5x x7 8 4x7 20 x x7 9 5x7 2 x7 24 x7 36 5x7 29 5x7 32 8x x7 44 x x7 55 8x x Radial Ripple Current ( ma, rms ) at 5 20Hz 85

86 SN Series SN Series 7 mm Non-polar 85 Features Non-polarized with 7 mm height for crossover networks of high-pitched, mean and low-pitched sounds in high-fiedelity sound systems. The series offers excellent frequency characteristics and minimal capacitance deviation with frequency. For detail specifications, please refer to Engineering Bulletin No. E9 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40 to +85 to 50 VDC 0. to 220 F 20% (20Hz, +20 ) I 0.05 CV or ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- Z+20 Z-4 Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage to each polarity for 500 Hrs After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+85 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

87 SN Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x x x x x x7 3 4x7 4 5 x x7 4 4 x7 5 4x7 8 5x7 5x x7 8 4x7 8 5x7 22 x7 27 5x7 2 4x7 23 4x7 24 4x7 x7 35 x7 37 8x7 44 5x x7 30 5x7 38 x7 5 x7 53 8x7 58 8x x7 40 x7 55 x7 60 8x7 70 8x x7 56 x7 65 x7 73 8x x7 92 8x7 5 8x x7 35 Radial Ripple Current ( ma, rms ) at 85 20Hz 87

88 SB Series SB Series 7 mm Non-polar 5 Features Non-polarized with 7mm height for crossover network of high-pitched, mean and low-pitched sounds in high-frequency sound systems. The series offers excellent frequency characteristics and minimal capacitance deviation with frequency. For detail specifications, please refer to Engineering Bulletin NO. E45 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to +5 to 50 VDC 0. to 0 F 20% (20Hz, +20 ) I 0.05 CV or ( A) After 2 minutes, whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- Z+20 Z-4 Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage to each polarity for 500 Hrs After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

89 SB Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 4x x x x x x7 3 5 x x7 4 5x7 8 5x x7 8 5x7 9 5x7 22 x7 27 4x7 23 4x7 24 5x7 30 x7 35 x7 37 8x x7 30 5x7 38 x7 5 x7 53 8x x7 40 x7 52 x7 58 8x7 70 8x x7 56 8x7 65 8x7 73 8x x7 92 8x7 5 8x7 20 Ripple Current ( ma, rms ) at 5 20Hz Radial 89

90 SZ Series SZ Series 7-9 mm Low Impedance Features Operating temperature range -55 to +5 5, 00 hours assured For detail specifications, please refer to Engineering Bulletin No. E2 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -55 to +5 to 35 VDC 6.8 to 330 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After 2 minutes, whichever is greater measured with rate working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Rated voltage(vdc) Z- Z+20 Z-55 Z Load Life Shelf Life Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

91 SZ Series Case Size WV (SV) (8) (3) (20) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 22 4x x x7.70 5x7.70 x x7.70 5x x x x x x x x x x x x x x x x x x x x x WV (SV) (32) 35 (44) Cap( F) Size Ripple Impedance Size Ripple Impedance 6.8 4x x x x7.70 x x x x x x x x x x Radial Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0 KHz 9

92 SY Series SY Series 7mm Low Impedance Long Life Features Operating temperature -55~ Hours assured. For detail specifications, please refer to Engineering Bulletin NO.E7 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -55 to +5 to 50 VDC ~330 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) After 2 minute with rated working voltage applied. Working Voltage(VDC) D.F.(%)max Impedance ratio max Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Working Voltage(VDC) Z- / Z-55 / Test condition :2000Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : within 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) (Hz) 50(60) K K 50-0K CAP CAP CAP Diagram of Dimensions:(unit:mm) D F d

93 SY Series Case Size WV(SV) (8) (3) (20) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 4X X X X X X X X X X X7 X X X X X X X X X X X X X X X X X X Radial WV(SV) (32) 35 (44) 50 (63) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 4X X X X X X X X X X X X X X X X X X Ripple Current(mA,rms) at 5 0KHz Max Impedance ( at 20 0KHz 93

94 GS(GR) Series GS(GR) Series General Purpose 85 Features Wide CV value range. Load life 2000 hrs at 85. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E RoHS Compliant Specifications Item Multiplier for Ripple Current vs. Frequency Performance Characteristics Operating Temperature Range -40 to to +85 Rated Voltage Range to 0 VDC 0 to 450 VDC Capacitance Range 0. to F 0.47 to 470 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) I 0.0 CV or 3 ( A) I 0.03 CV ( A) After minute whichever is greater measures with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Working Voltage(VDC) D.F. (%)max Working Voltage(VDC) D.F. (%)max For capacitance 00 F, add 2% per another 00 F. Impedance ratio max Working Voltage(VDC) Z- AZ Z-40 AZ Working Voltage(VDC) Z- Z For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for Test conditions :2000Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage Current : The initial specified value Test conditions :00Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d D 8 D 8 D 8 L 35.5 L

95 GS(GR) Series Case Size WV (SV) (8) (3) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 4.7 5x 34 5x 44 5x 44 5x 50 5x x 66 5x 83 5x 94 5x x 72 5x 88 5x 84 5x 5 5x x 88 5x 5 5x 32 5x 32 5x 43 x x 5x 32 5x 49 x 76 x x 43 5x 98 5x 76 x 209 x 23 x 204 8x x 5 5x 209 x 23 x 3 8x x 98 5x 23 x 3.x 275 8x x 220 x 3 x 275 8x x x 242 x 294 x 308 8x x x 264 8x x x 330 x 363 8x x.5 45 x x x x 385 x 48 8x x.5 56 x 693 8x x x x x x x x 693 x x x x x 792 x20 89 x x x x 803 x x x x x 869 x x x x x x 902 x 979 3x x x 935 x 0 x20 0 3x x x 35 x x x x x20 35 x20 2 3x x 705 x 870 x x x x20 7 x 804 x x x x 870 x 870 x x x x x x x 2002 x x x x 980 x 23 x x x x 2002 x 289 x x x x 23 x 2475 x x x x 2332 x3.5 4 x x x x x x x x x x x x x x x x x x x x x x (20) (32) 35 (44) Radial Ripple Current ( ma, rms ) at 85 20Hz 95

96 GS(GR) Series WV (SV) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 5x 3.3 5x 4 5x x 3.3 5x 4 5x x 5.5 5x 6 5x x 7.5 5x 8 5x 4 5x 2 5x 2 5x 7 5x 7 5x 27 5x 7 x x 28 5x 3 5x 40 x 30 x x 39 5x 39 5x 48 x 36 x x 46 5x 50 5x 58 x 40 8x.5 5 8x x 72 5x 77 5x 85 8x.5 80 x x 92 x x x 27 x 57 x x x x 32 x 49 8x x 80 3x x 38 8x.5 0 x x 5 x 98 x x x20 0 8x x 303 3x x x.5 3 x 387 3x x x x x x 430 x x.5 39 x 396 x x 530 x x x 462 3x x 560 x x x 528 3x x x x x 550 3x 740 x x x 484 x x 872 x x x 649 x x 920 8x x x x20 78 x 40 8x x x x x 2 8x x x x 23 x x x x 56 x x x x20 56 x 265 x x 287 x 430 8x x 485 x 540 8x4 940 x 540 x x 7 x x x x x x x x x x x x x x () 0 (200) 200 (0) Ripple Current ( ma, rms ) at 85 20Hz 96

97 GS(GR) Series WV (SV) 0 (300) 350 (400) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x 2 x 5 x 2 x 2 8x.5 2 x 7 x 22 x 20 8x x x 20 8x x x x.5 33 x x x x x.5 46 x x x x x.5 45 x x.5 48 x x x 56 x2.5 5 x 66 x 70 x x20 5 x20 5 3x20 5 3x x 22 x x x x 50 3x20 5 3x 200 x x20 2 3x 0 3x 230 x 90 3x 220 x 0 x x x 290 x 270 x 260 3x 260 x x x 390 x x x x x x x x x x x x x x x x x (450) 450 (500) Radial Ripple Current ( ma, rms ) at 85 20Hz 97

98 GW Series GW Series 9- mm height Low Profile 85 Features Miniaturized low profile. Height 9mm-mm max. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E23 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to to +85 Rated Voltage Range to 0 VDC 60 to 450 VDC Capacitance Range 2.2 to 000 F 2.2 to 220 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measured with rate working voltage applied. I 0.04 CV+0 ( A) After 2 minutes with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Working Voltage(VDC) D.F. (%)max Working Voltage(VDC) D.F. (%)max For capacitance 00 F, add 2% per another 00 F. Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Working Voltage(VDC) Z- Z For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for Test conditions :2000Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) 2.2~47 F 0~00 F 2200~000 F K K Diagram of Dimensions:(unit:mm) D F d

99 GW Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 2.2 5x9 23 5x x9 30 5x x9 35 5x x9 50 5x9 54 5x9 64 x x9 86 x x9 95 x9 5 8x x9 5 x9 20 x9 35 x x9 20 x9 30 x9 40 8x9 55 x x9 28 5x9 34 x9 0 x9 75 8x9 220 x9 230 x x9 50 x9 80 x x x9 300 x x x9 80 x9 2 8x x9 3 x9 335 x 380 3x x x x x9 340 x9 400 x x3 530 x 6 x x x x9 360 x9 4 x x x 720 x 840 3x 650 x x9 420 x9 540 x x 700 3x 750 x 805 x x x9 530 x x x 50 x 230 x x x 50 3x 80 x 50 x x2 00 8x 50 8x x 200 x 350 x 500 8x2 00 8x 750 8x x 500 x x2 50 8x x x x 220 8x x x 2300 Radial WV (SV) 0 () 0 (200) 200 (0) 0 (300) 350 (400) 400 (450) 450 (500) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple.5 8x x9 27 8x9 38 x x9 33 8x9 45 x9 50 x x9 4 8x9 50 8x9 55 8x9 60 x9 78 x9 90 x2.5 5 x x9 59 8x9 75 8x9 78 x9 82 x 5 3x 3x 35 8x9 78 x9 87 x9 92 x9 98 3x 45 3x 0 x 200 x 20 x x9 7 x 35 3x 50 3x 5 x 90 x2 230 x2 0 x 2 8x 2 33 x9 55 3x 75 3x 90 x 230 x x x2 320 x 200 8x 260 8x x 220 3x 285 x 320 x x x x 4 x 3 8x x 26 x 340 x 360 x x 5 8x 540 3x x x3 4 x2 55 x x x 579 8x x 645 8x x x x x 36 Ripple Current ( ma, rms ) at 85 20Hz 99

100 KM Series KM Series Standard 5 Features Used in communication equipments, switching power supply, etc. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E2 RoHS Compliant Specifications Item Multiplier for Ripple Current vs. Frequency Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 0 VDC 0 to 450 VDC Capacitance Range 0. to F 0.47 to 470 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life I 0.0 CV or 3 ( A) After minute whichever is greater measured with rated working voltage applied. Working Voltage(VDC) D.F. (%)max Working Voltage(VDC) D.F. (%)max For capacitance 00 F, add 2% per another 00 F. Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Working Voltage(VDC) Z- Z I 0.03 CV ( A) After minute with rated working voltage applied. For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for Test conditions :2000Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP CAP Diagram of Dimensions:(unit:mm) K K K-0K D F d D 8 D 8 D 8 L 35.5 L

101 KM Series Case Size WV (SV) (8) (3) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 4.7 5x 26 5x x 32 5x 36 5x 35 5x 38 5x x 45 5x 54 5x 58 5x x 54 5x 60 5x 64 5x 69 5x x 65 5x 70 5x 0 5x 5 5x 68 5x 75 5x 80 5x 5 x 20 x x 96 5x 5 5x 5 x 45 x 0 x 30 8x x 5x 20 x 55 x 75 8x x 20 x 45 x 70 8x x.5 x x 40 x 0 x 90 8x.5 2 x x 0 x 75 x 8x x x 95 8x.5 5 8x x.5 3 x x x x x x.5 4 x x x.5 3 8x x2.5 4 x 460 x x x x x x 520 3x x x x 550 x x x x x 600 x20 7 3x x x 630 x x20 8 3x x x 6 x 770 x x x x 7 x x x20 50 x x 750 x x x 200 x 290 x x x x x20 80 x 320 x x x20 0 3x 200 x 460 x x x x 490 x x x x 350 x 00 x x x 300 x 490 x x x x 480 x 70 x x x 520 x x x x 80 x x x x x x x x x x (20) (32) 35 (44) Radial Ripple Current ( ma, rms ) at 5 20Hz

102 KM Series WV (SV) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 5x.3 5x.3 5x x 2.9 5x 2.9 5x x 4 5x 4.5 5x x 7 5x 7 5x 5x 5x 2 5x 3 5x 3 5x 5 5x 7 x 7 x x 20 5x 20 5x 2 x x 3.3 5x 26 5x 28 5x 30 x 32 x 33 8x x 32 5x 32 5x 35 x 38 8x x x 40 5x 40 x 47 8x x.5 60 x x 48 5x 48 x 56 x x x.5 60 x x 70 x 82 8x.5 90 x 5 x x 75 x20 20 x x 90 x 0 8x.5 40 x20 70 x20 80 x x x 5 x x x20 2 3x x x.5 55 x x 240 3x x 300 3x x x x x 3 x 345 x x2.5 2 x 5 x x 350 x 360 x x x 270 3x x 470 x x x 280 x 3 3x20 4 x 550 x x 480 x x x 375 3x 520 x x x 360 x x x 450 3x x 690 8x x x x x x x 820 8x x4 9 3x x x x 770 x x 770 x 880 x x x 850 x 920 8x x 00 x x x 50 x x x x x x x () 0 (200) 200 (0) Ripple Current ( ma, rms ) at 5 20Hz 2

103 KM Series WV (SV) 0 (300) 350 (400) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x 8 x 3 x 4 x 4 x x x 7 8x x.5 8x.5 3 8x.5 35 x x x x.5 36 x x x2.5 4 x x x.5 47 x x 42 x x x x x x 90 x x.5 68 x 87 x x20 92 x x20 92 x20 3x x20 3x20 0 3x x 80 3x x 70 3x x x 200 3x 260 x x x 245 x 300 x x 240 x x x x 280 x 330 x x x 355 x x x x x x 370 x x x x x x x x x x x4 650 x x x x x x x x x x x x (450) 450 (500) Radial Ripple Current ( ma, rms ) at 5 20Hz 3

104 KW Series KW Series 9-mm Low Profile 5 Features Used space-savinq eguipment, low profile. Load life 2000 hrs at 5. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E24 RoHS Compliant Specifications Item Multiplier for Ripple Current vs. Frequency Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 0 VDC 0 to 450 VDC Capacitance Range 2.2 to 000 F.5 to 220 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measures with rate working voltage applied. Working Voltage(VDC) D.F. (%)max Working Voltage(VDC) D.F. (%)max For capacitance 00, add 2 per another 00 F. Impedance ratio max Working Voltage(VDC) Z- Z Z-40 AZ Working Voltage(VDC) Z- Z I 0.04 CV +0 ( A) After 2 minutes with rated working voltage applied. For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for Test conditions :2000Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. CAP( F) Frequency(Hz) 50(60) 0.47 CAP 47 0 CAP CAP K K Diagram of Dimensions:(unit:mm) D F d

105 KW Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 2.2 5x9 9 5x x9 5x x9 40 5x x9 48 5x9 49 5x9 54 5x x9 75 x x9 90 x9 5 x x9 5 5x9 x9 20 x9 30 8x x9 5 x9 x9 30 8x9 45 8x9 9 x x9 20 5x9 35 x9 50 x9 0 8x9 80 x9 200 x x9 35 x9 50 x9 0 8x9 85 8x9 2 x9 0 x x9 5 x9 5 8x x9 230 x9 5 x x x9 85 8x x9 0 x9 3 x x x 382 3x x x9 275 x9 3 x x3 4 x 550 x 490 x x x9 3 x x x 520 3x 580 x 700 x x9 370 x x x 600 x 750 x2 850 x x 620 3x 690 x 850 x x x 300 8x x 860 x 950 x2 80 8x2 0 8x x x2 50 8x x x 2 8x x x x 700 Radial WV (SV) 0 () 0 (200) 200 (0) 0 (300) 350 (400) 400 (450) 450 (500) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple.5 8x x9 20 8x9 35 x x9 27 8x9 35 x9 40 x x9 42 8x9 50 8x9 50 8x9 50 x9 50 3x 50 3x x9 56 8x9 55 8x9 58 x9 65 3x 80 3x 80 3x 68 8x9 72 x9 80 x9 78 3x 82 3x 95 3x 0 x 0 x x9 4 3x 20 3x 45 3x 5 x 80 x2 85 x2 70 x x9 4 3x 75 x 200 x 2 x2 2 8x x 2 47 x 97 x 2 x 240 8x 350 8x x x x 200 x2 305 x x x x3 247 x x2 4 8x x 295 8x x 560 x x 373 8x x x 745 Ripple Current ( ma, rms ) at 5 20Hz 5

106 LL Series LL Series Low Leakage Current Features Extremely low and stable leakage current characteristics. Close capacitance tolerance 20% ( % on requested) For detail specifications, please refer to Engineering Bulletin No. E9 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current(+20, max) Performance Characteristics -40 to +5 to 63 VDC 0. to 2200 F 20% (20Hz, +20 ) I CV or 0.4 ( A) After 3 minutes(90sec. F) whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage (VDC) D.F. (%)max Low Temperature Characteristics (at 20Hz) Impedance ratio max Working Voltage (VDC) Z-40 / Z Load Life Test conditions :2000Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : The initial specified value Shelf Life Test conditions Ambient temperature Applied voltage :00Hrs :+5 :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP 0 0 CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

107 LL Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) 50 (63) 63 (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0. 5x 8.8 5x x 8.8 5x x 8.8 5x x 2 5x 2 5x 7 5x x 24 5x x 29 5x x 32 5x 33 5x 36 5x 39 5x 39 5x 43 5x 48 5x 52 x x 36 5x 50 5x 62 5x 65 x 7 x 77 x x 44 5x 66 5x 68 5x 76 x 83 x 99 8x x 53 5x 75 5x 5 x x 8x x x 74 5x 4 x 38 8x x.5 87 x x x 3 8x x x x x x x 8x.5 6 8x x x 440 3x x x x.5 39 x x 484 3x x x x 605 x x x x x x 890 Radial Ripple Current ( ma, rms ) at 5 20Hz 7

108 GL Series GL Series Low Impedance, Long Life Features Low impedance for high frequency, Anti-Solvent Design. Long Life 2000 ~ 5000 hrs at 5 depending on case size. Radial type for switching power supply. For detail specifications, please refer to Engineering Bulletin No. E3 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Performance Characteristics -55 to +5 to 63 VDC 0.47 to 000 F 20% (20Hz, +20 ) I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measured with rate working voltage applied. Working Voltage (VDC) D.F. (%)max For Capacitance 00 F, add 2 per another 00 F. Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Z-55 Z For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for add.5 per another 00 F for Load Life Shelf Life Test conditions :as right Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value D 5-8 Test conditions :00Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Life hours Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.47 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

109 GL Series Case Size WV(SV) (8) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 5x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (3) (20) Radial Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 9

110 GL Series WV(SV) (32) 35 (44) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance x x x x x x x x x x x x x x x x x x x x x x x.53 5x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (63) 63 (79) Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz

111 KF Series KF Series Low Impedance Features Used in communication equipments, switching power supply, industrial measuring instruments, etc. Load life 2000~5000 Hrs at 5 Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E26 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 0 VDC 0 to 450 VDC Capacitance Range 0.47 to 5000 F 0.47 to 470 F Capacitance Tolerance 20%(20Hz,+20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measured with rated working voltage applied. Working Voltage(VDC) D.F. (%)max Working Voltage(VDC) D.F. (%)max For capacitance 00 F, add 2% per another 00uF. Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Working Voltage(VDC) Z- Z Z-40 Z I 0.03 CV ( A) After 2 minutes withrate working voltage applied. For capacitance 00 F, add 0.5 per another 00uF for add per another 00uF for Test conditions : as right D Life hours Ambient temperature : Applied voltage : Rated DC working voltage After test requirements at Capacitance change : 20% of the initial measured value 5000 Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value (0-450V : 2000hrs) Test conditions : 00Hrs Ambient temperature : +5 Applied voltage : None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Radial Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.47 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d D 8 D 8 D 8 L 35.5 L

112 KF Series Case Size WV(SV) (8) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 5x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (3) (20) Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 2

113 KF Series WV(SV) (32) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance x 5.4 5x x x x x x x x x x x x.89 5x x x x.95 5x 50.5 x x x 80.2 x x 90. x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (44) 50 (63) Radial Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 3

114 KF Series WV(SV) 63 (79) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance x 5.4 5x x x x x x x x x x x x x x x x x x 0.82 x 5.95 x x.75 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x () 0 (200) Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 4

115 KF Series WV(SV) 200 (0) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x 4.80 x 5.64 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (300) 350 (400) Radial WV(SV) 400 (450) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 0.47 x x x x x x x x x 65. 8x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x (470) 450 (500) Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 5

116 KZ Series KZ Series Low Impedance Features Used in communication equipments, switching power supply, industrial measuring instruments, etc. Load life ~2000hrs. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin NO. E44 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Performance Characteristics -40 to +5 to 50 VDC 0.47 to 6800 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measured with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage(VDC) D.F. (%)max For capacitance 00 F, add 2% per another 00uF. Impedance ratio max Low Temperature Characteristics (at 20Hz) Working Voltage(VDC) Z- Z Z-40 Z For capacitance 00 F, add 0.5 per another 00uF for - / +20 add per another 00uF for -40 / +20 Load Life Shelf Life Test conditions Ambient temperature Applied voltage : as right : +5 : Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions : 00Hrs Ambient temperature : +5 Applied voltage : None After test requirements at +20 : Same limits as Load life. D 5-8 Life hours Multiplier for Ripple Current vs. Frequency Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. CAP( F) Frequency(Hz) 50(60) CAP 0.47 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

117 KZ Series Case Size WV(SV) (8) (3) (20) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 5x x x x x x x x x x x x 5.2 5x x 0. 5x x x x x x x x x x x x 0.72 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Radial 7

118 KZ Series WV(SV) (32) 35 (44) 50 (63) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance x x x x x x x x x x x x x 2.8 5x x x x 8.8 5x x x x 80.2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 8

119 GF Series GF Series Low Impedance Features Used in mother board, computer peripheral, etc. Load life 2000 ~ 5000 Hrs at 5 Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E27 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -55 to +5 Rated Voltage Range to 0 VDC Capacitance Range 4.7 to 6800 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) I 0.0 CV or 3 ( A) After 2 minutes whichever is greater measured with rated working voltage applied. Working Voltage (VDC) D.F. (%)max For capacitance 00 F, add 2% per another 00 F. Impedance ratio max Radial Low Temperature Characteristics (at 20Hz) Working Voltage Z(- ) / Z(20 ) Z(-40 ) / Z(20 ) For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for Load Life Shelf Life Test conditions Ambient temperature Applied voltage :as right :+5 :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00Hrs Ambient temperature :+5 Applied voltage :None D 5-8 Life hours After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.47 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

120 GF Series Case Size WV(SV) (8) (3) Impedance Impedance Size Ripple Size Ripple Cap( F) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 20

121 GF Series pdxl(mm) WV(SV) (20) (32) Impedance Impedance Size Ripple Size Ripple Cap( F) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Radial Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 2

122 GF Series WV(SV) 35 (44) 50 (63) Impedance Impedance Size Ripple Size Ripple Cap( F) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz 22

123 GF Series WV(SV) 63 (79) 0 () Impedance Impedance Size Ripple Size Ripple Cap( F) x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( ma, rms ) at 5 0KHz Max Impedance ( ) at 20 0KHz Radial 23

124 LZ Series LZ Series Ultra Low Impedance Features Ultra low impedance in 0KHz. Allow higher ripple current applied due to ultra low impedance. Load life 2000hrs at 5 Suitable for application of mother board, computer peripheral etc. For more details, please refer to CapXon Engineering Bulletin No. 33 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Performance Characteristics -40 ~ +5 ~ V with rate working voltage applied 220 to 3300 F 20% (20, 20Hz) I 0.0CV or 3 A After 2 minutes whichever is greater measured For capacitance > 00 F, add 2 per another 00 F Impedance ratio max Rated Voltage(V) D.F. ( ) max Rated Voltage(V) Z- Z Z-40 Z For Capacitance Value > 00 F, add 0.5 per another 00 F for add per another 00 F for Test Conditions Duration : 2000 hrs Ambient temperature : +5 Test Load : Rated DC working voltage After test requirements at +20 Capacitance change : Within % of the initial measured value Dissipation factor : Not exceed 200% of the initial specified value Leakage current : Not exceed the specified value Test Conditions Duration : 00 hrs Ambient temperature : +5 Test Load : DC rated voltage with ripple current applied After test requirements at +20 Capacitance change : Within % of the initial measured value Dissipation factor : Not exceed 200% of the initial specified value Leakage current : Not exceed the specified value Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 20Hz 0 ~ 330 F ~00 F ~ 3300 F 0.55 KHz KHz KHz Diagram of Dimensions:(unit:mm) D F d

125 LZ Series Case Size WV(SV) (8) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 330 8X X X X x X X x X X X X x X X x X X x X X x X X x X X x X x X X x X x X x x (3) (20) Radial WV(SV) (32) Cap( F) Size Ripple Impedance 220 8X X X X X X X X X X X X Ripple Current ( ma, rms ) at 5 0KHz Max ESR ( ) at 20 0KHz

126 GH Series GH Series Features Low impedance High temperature, Long life 3,000 to,000 hours at 5 For detail specifications, please refer to Engineering Bulletin NO. 70. Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Performance Characteristics -55 to +5 to 50 VDC 0.47 to 6800 F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) (After 2 minute with rated working voltage applied.) Working Voltage(VDC) D.F.(%)max For capacitance 00 F,add 2% per another 00 F. Impedance ratio max Rated voltage(vdc) Z- / Z Z-40 / Z Z-55 / Z Load Life Shelf Life Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) K K 0K CAP CAP CAP CAP Diagram of Dimensions:(unit:mm) For Capacitance 00 F, add 0.5 per another 00 F for add per another 00 F for add.5 per another 00 F for Test condition : D Life hours 4000 hours 7000 hours 000 hours * down size load life D 5-8 ~ hours 4000 hours 6000hrs 7000hours Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : % of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. D F d

127 GH Series Case Size WV(SV) Cap( F) (8) (3) (20) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance 5X X X X X X X X X X X.7 5X X X X X X X 0.5 X X X X X X X* X X X 200. X X* X X X X5 8X X X* X X5 8X X X X5* X X X* X X.5* X X X X X5* X5* X.5* X X X X X X5* X* X X X X X X.5* X.5* X* X X X X X X2.5* X X.5* X X20* X X X X X X.5* X* X20* X X X* X2.5* X X X X* X* X X X X X2.5* X X X20* X20* X X* X X X X X* X X X X* 0. X X30* X X X20* X X20 0. X* X20* X X X X X X X* X X20* X X X X X X30* X30* X X* X X X* X X* X35* X X* X X X X30* X X X X* X* X X35* X3.5* X X X X30* X X35.5* X is down size * 27 Ripple Current ( ma, rms ) at 5 0KHz Max Impedance( )at 20 0KHz Radial

128 GH Series WV(SV) (32) 35(44) 50(63) Cap( F) Size Ripple Impedance Size Ripple Impedance Size Ripple Impedance X X X X X X X X X X X X X X X X X* 35.6 X X X* X 0.02 X X X* 85. X* X 200. X X 45.5 X 2. X* X X X X X X 220. X* X X X X* X X X X X5* X X.5* X X X5* X.5* X X X X.5* X X X X X X* X X X X X X X20* X X X X X* X* X X X X2.5* X.5* X20* X20* X X2.5* X X X X X20* X* X X* X X X20* X20* X2.5* X X X X X20* X* X20* X X X X X* X* X X X20* X20* X30* X X X X* X30* X* X X* X X X X* X3.5* X X X20* X35* X35.5* X X X X35* X X X30* X3.5* X X* X X3.5* X X3.5* X X* is down size * 28 Ripple Current ( ma, rms ) at 5 0KHz Max Impedance( )at 20 0KHz

129 KL Series KL Series Long Life 5,000 hrs Features Used in electronic ballast, switching power supply, industrial measuring instruments. Load life 5000 Hrs at 5 Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Performance Characteristics - to +5 0 to 450 VDC to 220 F 20%(20Hz,+20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) I 0.04 CV+0 ( A) After minute with rated working voltage applied. Working Voltage(VDC) D. F.(%) max Radial Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max Working Voltage(VDC) Z- Z Test conditions Ambient temperature Applied voltage : 5000Hrs : +5 : Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions : 00Hrs Ambient temperature :+5 Applied voltage : None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier 20.0 K.5 K.70 0KHz.90 Diagram of Dimensions:(unit:mm) D F d

130 KL Series Case Size WV (SV) 0 (200) 200 (0) 0 (300) 350 (400) 400 (450) 450 (500) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x 5 x20 2 x x x x x20 95 x20 5 3x x20 0 3x 320 x x20 0 3x x 400 x2 320 x 350 x x x x 500 x x x 390 3x 530 x 600 x x 560 x 8 8x x x x4 750 Ripple Current ( ma, rms ) at 5 20Hz 30

131 KH Series KH Series Long Life 5,000~,000 hrs Features Used in electronic ballast, switching power supply, industrial measuring instruments. higher ripple current Load life 5000~000 Hrs at 5 Safety vent construction design. For detail specifications, please refer to Engineering Bulletin No. E42 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 50 VDC 0 to 450 VDC Capacitance Range 6.8 to 3300 F 6.8 to 220 F Capacitance Tolerance Leakage Current (+20,max.) I 0.0 CV or 3 ( A) 20%(20Hz,+20 ) I 0.04 CV+0 ( A) After minute with rated working voltage applied. l=leakage Current( A) C=Rated capacitance( F) V=Rated Voltage(V) Radial Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Working oltage(vdc) D.F.(%)max Impedance ratio max Working oltage(vdc) Z- / Z Load Life Shelf Life Test conditions Ambient temperature Applied voltage : as right : +5 : Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions : 00Hrs Ambient temperature :+5 Applied voltage : None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. D 8 8 Life hours 5,000 8,000,000 Multiplier for Ripple Current vs. Frequency Frequency(Hz) Multiplier K 0.80 K K.0 Diagram of Dimensions:(unit:mm) D F d

132 KH Series Case Size WV (SV) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 6.8 5x 86 5x 74 5x x 20 5x 38 x x 5 5x 43 x 78 8x x 3 5x 72 x 230 8x x x x 44 x 28 8x x x x 233 8x x x x x 309 8x x x 632 x x 392 8x x 65 x x x x x 586 x x x x x x x 73 x x 3 3x x 552 x x x x 2093 x x 2070 WV (SV) 0 (200) 200 (0) 0 (300) 350 (400) 400 (450) 450 (500) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 6.8 x x x x 280 x20 3 x x x x x x x x 600 x 690 x x20 6 3x x 750 x x x x x20 9 x x2 20 8x 30 8x x 0 x 90 8x x 400 8x x x2 3 8x x 780 8x 800 8x x x Ripple Current ( ma, rms ) at 5 0KHz 32

133 TH Series TH Series High Temperature Features The series has guaranteed operating life of 00~2000 hours at widest operating temperature range, -40 to + Applications : High reliability equipment, filtering circuit of switching power supply, and industrial control equipment. For detail specifications, please refer to Engineering Bulletin No. E29 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to + - to + Rated Voltage Range to 0 VDC 0 to 350 VDC Capacitance Range 0.47 to 00 F to 0 F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) I 0.0 CV or 3( A) After minute whichever is greater measured with rated working voltage applied. 20%(20Hz,+20 ) Working Voltage(VDC) D. F.(%) max Working Voltage(VDC) D. F.(%) max For capacitance 00 uf, add 2% per another 00uF. Impedance ratio max I 0.02 CV ( A) After minute withrated working voltage applied. Working Voltage(VDC) ~0 350~450 Z- Z Z-40 Z Radial Load Life Shelf Life Test conditions : 00~2000Hrs Ambient temperature : + Applied voltage : Rated DC working voltage After test requirements at +20 Capacitance change : 5% of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : The initial specified value D 8 Test conditions : 00Hrs Ambient temperature : + Applied voltage : None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Life hours,000 2,000 Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

134 TH Series Case Size WV (SV) (3) (20) (32) (44) (63) (79) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x 38 x 48 8x x 70 x 82 8x x x 9 x 0 8x.5 8 8x.5 22 x x 92 x 8x.5 30 x x2.5 4 x 72 0 x 45 8x x2.5 0 x 262 x x x x x 470 x x x x2.5 4 x 5 x x x 900 x x 5 x x20 8 3x 900 x x x20 00 x 0 x WV (SV) 0 () 0 (200) 200 (0) 0 (300) 350 (400) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0.47 x 4 x 24 x 30 x 36 x 4 8x x 3 x 37 x 43 8x.5 50 x x 36 8x.5 4 8x.5 48 x x x x.5 52 x x 68 x20 75 x x x 88 x x20 22 x 0 x x x 0 x x x20 4 3x 72 x 85 x x x 200 x x x x 3 x 365 x Ripple Current ( ma, rms ) at 20Hz 34

135 TE Series TE Series High Temperature Features The series has guaranteed operation life of 2~3000 hours at 30 wide operating temperature range,-40 to +30 Applications :High reliability equipment, filtering circuit of switching power supply, and industrial control equipment. For detail specifications, please refer to Engineering Bulletin NO. E47 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Performance Characteristics -40 to +30 to 50 VDC 3.3to 4700 F 20%(20Hz,+20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) I 0.0 CV or 3 ( A) After minute whichever is greater measured with rated working voltage applied. Working Voltage(VDC) D. F.(%) max For capacitance 00uF, add 2% per another 00uF. Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Radial Load Life Shelf Life Test conditions Ambient temperature Applied voltage : as right : +30 : Rated DC working voltage After test requirement at +20 Capacitance change : 5% of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : The initial specified value D 8 Life hours 2,000 3,000 Test conditions : 00Hrs Ambient temperature : +30 Applied voltage : None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

136 TE Series Case Size WV (SV) (3) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x x x 420 x x.5 0 x x 330 x x x x 360 x x x 820 x x x x x 880 x 00 x x x x 950 x x x x 0 x x x 350 x 400 x x x 820 x x x x Ripple Current ( ma, rms ) at 30 20Hz 36

137 KS Series KS Series 5 Overvoltage Vent Operation Facility Features High ripple current capability. This series has specification of vent operation in overvoltage situation. For detail specifications, please refer to Engineering Bulletin NO. E58 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Tolerance Leakage Current (+20,max.) Performance Characteristics -~+5 200V 400V 20%(20Hz,+20 ) I 0.03 CV ( A) After minute with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Load Life Working Voltage(VDC) D.F.(%)max. 5 5 Test condition :2000 Hrs Ambient temperaturev:+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factorv: 200% of the initial specified value Leakage current : The initial specified value Radial Shelf Life Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency Frequency(Hz) WV(V) Capacitance( F) 60(50) K K ~ ~ ~ Diagram of Dimensions:(unit:mm) D 3 8 F d

138 KS Series Case Size Cap( F) WV (SV) 200 (0) WV (SV) 400 (450) Size Ripple Cap( F) Size Ripple 22 X X X 0 X 0 3X20 0 X20 X X X X X 2 X X 270 3X X2 270 X2 2 3X30 3 X X2 320 X X 360 8X 300 X 400 8X X2 400 X X X 350 X X X 500 X X X X X X 560 X X X X X X X X X X X X X X X X X X X X4 790 Ripple Current ( ma, rms ) at 5 20Hz 38

139 FK Series FK Series Long Life for ballast 5 Features Specially designed for electronic ballast and energy-save lamp Load life 6000~8000 hrs at 5 Safety vent construction design. For detail specifications, please refer to Engineering Bulletin NO. E7 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -~+5 0~450 VDC to 330 F 20%(20Hz,+20 ) I 0.04 CV +0 ( A)After minute with rated working voltage applied. Working Voltage(VDC) D.F.(%)max Radial Low Temperature Characteristics (at 20Hz) Impedance ratio max Working voltage(vdc) Z- / Load Life Test condition :As right Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : with 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value D Life (hours) Shelf Life Test condition Ambient temperature Applied voltage :00Hrs :+5 :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency Frequency (Hz) 20 K K K Multiplier Diagram of Dimensions:(unit:mm) D F d

140 FK Series Case Size Cap( F) WV(SV) 0 (200) 200 (0) 0 (300) 350 (400) 400 (450) 450 (500) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple.0 8X X X X X X.5 85 X X.5 75 X X X X.5 80 X2.5 0 X2.5 0 X X X.5 0 X2.5 5 X X 5 X20 X2.5 5 X2.5 5 X 30 X20 40 X20 0 3X X 70 X 70 X X X X X X X X 340 3X 3 X X X X 370 X 4 X X X X 4 X 495 8X 530 8X X X2 550 X 600 X X X X 655 X X X X X Ripple Current ( ma, rms ) at 5 20Hz 40

141 FL Series FL Series Long Life for ballast 5 Features Specially designed for electronic ballast and energy-save lamp Load life 8000~000 hrs at 5 Safety vent construction design. For detail specifications, please refer to Engineering Bulletin NO. E49 RoHS Compliant FK long life FL Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Performance Characteristics -~+5 0~450 VDC 0. to 330 F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) 20%(20Hz,+20 ) I=0.04 CV +0 ( A) (After minute with rated working voltage applied.) Working Voltage(VDC) D.F.(%)max at 20Hz Radial Low Temperature Characteristics (at 20Hz) Impedance ratio max Working voltage(vdc) Z- / Load Life Test condition :As right Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance chang : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value D Life (hours) Shelf Life Test condition Ambient temperature Applied voltage :00 Hrs :+5 :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency Frequency(Hz) 20 K K K Multiplier Diagram of Dimensions:(unit:mm).5 D F d

142 FL Series Case Size Cap( F) WV(SV) 0 (200) 200 (0) 0 (300) 350 (400) 400 (450) 450 (500) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple.0 8X.5 80 X X X X X X.5 80 X X 0 X 4.7 X2.5 5 X 5 X20 5 X X2.5 5 X2.5 X 5 X20 X20 35 X X X 40 X X X X X X X X 270 X X20 0 3X X X 360 X 370 X X X X 390 X 430 X X X X2 470 X 520 8X 560 8X X X2 580 X 630 X X X X X 690 8X 840 8X X X X X X4 0 Ripple Current ( ma, rms ) at 5 20Hz 42

143 NP Series NP Series Non-polarized 85 Features NP Series for crossover networks of high-pitched, mean and low-pitched sounds in high-fidelity sound systems. The series offers excellent frequency characteristics and minimal capacitance deviation with frequency. For detail specifications, please refer to Engineering Bulletin No. E5 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to to +85 Rated Voltage Range to 0 VDC 0 to 0 VDC Capacitance Range 0.47 to 3300 F 0.47 to 47 F Capacitance Tolerance 20%(20Hz,+20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life I 0.03 CV or 3 ( A) After minute whichever is greater measured with rate working voltage applied. Working Voltage(VDC) D.F. (%)max For Capacitance 00 uf, add 2% per another 00 uf Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Working Voltage(VDC) Z- Z For Capacitance 00 uf, add 0.5 per another 00 uf for add per another 00 uf for Test conditions : 2000Hrs Ambient temperature : +85 Applied voltage : Rated DC working voltage Each 0 hours, we will reserve the terminal and test the characteristics. After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : The initial specified value Test conditions : 00Hrs Ambient temperature : +85 Applied voltage : None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Radial Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

144 NP Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 5x 34 5x x 55 5x 57 x 65 x x 66 5x 75 x 86 8x x 82 x 97 x 0 8x x 20 x 8x.5 2 8x.5 75 x2.5 2 x x 75 8x x x x x x.5 0 x x 350 x x x x x 388 x x x x x x x x x 00 x x 970 8x WV (SV) 50 (63) 63 (79) 0 () 0 (200) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x 5x 2 5x 4 5x 7 5x 7 5x 8 5x 2 x 2.2 5x 5x 26 5x 34 8x x 27 x 28 x 39 8x x 34 x 34 8x.5 47 x x 52 x 57 8x.5 7 x x x.5 97 x 40 3x x.5 9 x x 90 3x x x x 80 x x 0 3x x x x x x 5 x 520 x x 560 WV (SV) 200 (0) 0 (300) Cap( F) Size Ripple Size Ripple 0.47 x 2 x 28 8x x x.5 42 x x x x 56 x20 88 x20 95 x x x x 0 x 305 Ripple Current ( ma, rms ) at 85 20Hz 44

145 NK Series NK Series Non-polarized 5 Features NK Series for crossover networks of high-pitched, mean and low-pitched sounds in high-fidelity sound systems. The series offers excellent frequency characteristics and minimal capacitance deviation with frequency. For detail specifications, please refer to Engineering Bulletin No.E RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 0 VDC 0 to 0 VDC Capacitance Range 0.47 to 3300 F 0.47 to 47 F Capacitance Tolerance 20%(20Hz,+20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life I 0.03 CV or 3( A) After minute whichever is greater measured with rate working voltage applied. Working Voltage(VDC) D.F. (%)max For Capacitance 00 uf, add 2% per another 00 uf Impedance ratio max Working Voltage(VDC) Z- Z Z-40 Z Working Voltage(VDC) Z- Z For Capacitance 00 uf, add 0.5 per another 00 uf for add per another 00 uf for Test conditions : 2000Hrs Ambient temperature : +5 Applied voltage : Rated DC working voltage Each 0 hours, we will reserve the terminal and test the characteristics. After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : The initial specified value Test conditions : 00Hrs Ambient temperature : +5 Applied voltage : None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Radial Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d

146 NK Series Case Size WV (SV) (8) (3) (20) (32) 35 (44) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 5x 34 5x x 53 x 55 x x 59 5x 62 x 72 8x x 79 x 90 x 96 8x x 99 x 99 x 99 8x.5 52 x x x x x x x x x.5 90 x x2.5 5 x 3 3x x x x 360 3x x x 352 x x x x 830 x x 950 x WV (SV) 50 (63) 63 (79) 0 () 0 (200) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x 8 5x 9 5x 5x 2 5x 2 5x 4 5x 5 x x 7 5x 20 5x 20 8x.5 28 x x 23 x x 28 8x x 30 x 30 x 32 x x.5 36 x 50 x 52 8x.5 52 x 79 x x x.5 88 x 20 3x20 40 x x.5 89 x2.5 5 x x x x 50 3x x 0 x 98 3x x 399 x x x 420 3x x 500 WV (SV) 200 (0) 0 (300) Cap( F) Size Ripple Size Ripple 0.47 x 7 x 22 8x.5 2 8x x.5 32 x x x x 52 x20 65 x20 86 x x20 0 3x x 23 x 0 Ripple Current ( ma, rms ) at 5 20Hz 46

147 BP Series BP Series Bi-polarized Features The BP Series is designed for horizontal deflection current in TV sets where high frequency and high ripple current flows. Low dissipation factor at high frequency. For detail specifications, please refer to Engineering Bulletin No. E RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Performance Characteristics -40 to +5,50,63 VDC 2.2 to 5 F % (20Hz, +20 ) Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) I=0 ( A) max. After minute with rated working voltage applied. Less than 3% (+20,at 20Hz) Radial Low Temperature Characteristics (at 20Hz) Impedance ratio max Working Voltage (VDC) Z-40 Z Load Life Test conditions :2000Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 5% of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : The initial specified value Shelf Life Test conditions Ambient temperature Applied voltage :00Hrs :+5 :None After test requirements at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Diagram of Dimensions:(unit:mm) D F d

148 BP Series Case Size Cap( F) Size WV(SW) Max Ripple Current (at 5.75K Hz Unit:A P-P) x v, 50v, 63v 3.4a p-p 5.8 a p-p 7.5 a p-p 3.3 x v, 50v, 63v 4.a p-p 7.0 a p-p 9. a p-p 4.7 x3.5 v, 50v, 63v 4.5 a p-p 7.8 a p-p a p-p 6.8 x35.5 v, 50v, 63v 4.6 a p-p 8.0 a p-p.4 a p-p 8x35.5 v, 50v, 63v 4.9 a p-p 8.6 a p-p. a p-p 2 8x4 v, 50v, 63v 5.0 a p-p 8.8 a p-p.5 a p-p 5 8x4 v, 50v, 63v 5.4 a p-p 9.5 a p-p 2.2 a p-p Ripple Current ( A, rms ) at 5.75KHz 48

149 SW Series SW Series 5mm 85 Features Design for audio equipment. For detail specifications, please refer to Engineering Bulletin NO.E52 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40~+85 4~50 VDC 0. to 470 F 20%(20Hz,+20 ) I=0.0 CV or 3 ( A) (After 2 minute with rated working voltage applied.) Working Voltage(VDC) D.F.(%)max Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max Working voltage(vdc) Z- / Z Z-40 / Z Test condition :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. For Audio Equipment Multiplier for Ripple Current vs. Frequency CAP( F) (Hz) K K Multiplier Diagram of Dimension:(unit:mm) D F d

150 SW Series Case Size Cap( F) WV(SV) 4 (5) (8) (3) (20) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple (32) (44) 50 (63) Ripple Current ( ma, rms ) at 85 20Hz 50

151 SR Series SR Series 7mm 85 Features Design for audio equipment. Lineally suited for very compact audio products. For detail specifications, please refer to Engineering Bulletin NO.E5 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40~+85 ~50 VDC 0. to 220 F 20%(20Hz,+20 ) I=0.0 CV or 3 ( A) (After 2 minute with rated working voltage applied.) Working Voltage(VDC) D.F.(%)max Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max Working voltage(vdc) Z- / Z Z-40 / Z Test condition :00 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. For Audio Snap-in Equipment Multiplier for Ripple Current vs. Frequency CAP( F) (Hz) K K Multiplier Diagram of Dimension:(unit:mm) D 4 5 F d

152 SR Series Case Size Cap( F) WV(SV) (8) (3) (20) (32) 35 (44) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 50 (63) Ripple Current ( ma, rms ) at 85 20Hz 52

153 RW Series RW Series 85 Features Standard for audio equipment. For detail specifications, please refer to Engineering Bulletin NO.E50 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40~+85 ~0 VDC 0. to F 20%(20Hz,+20 ) I 0.0 CV or 3 ( A) (After minute with rated working voltage applied.) Working Voltage(VDC) D.F.(%)max For capacitance 00 F,add 2% per another 00 F. Impedance ratio max Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Working voltage(vdc) Z- / Z Z-40 / Z Test condition :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. For Audio Equipment Multiplier for Ripple Current vs. Frequency CAP( F) (Hz) 50(60) K K CAP CAP Diagram of Dimension:(unit:mm) D F d

154 RW Series Case Size Cap( F) WV(SV) (8) (3) (20) (32) Size Ripple Size Ripple Size Ripple Size Ripple WV(SV) 35 (44) 50 (63) 63 (79) 0 () Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Ripple Current ( ma, rms ) at 85 20Hz 54

155 NR Series NR Series 85 Features Standard non polarity series for using in polarity reversal circuits. Design For audio equipment. For detail specifications, please refer to Engineering Bulletin NO.E53 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Performance Characteristics -40~+85 ~0 VDC 0.47 to 00 F 20%(20Hz,+20 ) I 0.03 CV or 3 ( A) (After minute with rated working voltage applied.) Working Voltage(VDC) D.F.(%)max Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max (at: 20Hz) Working voltage(vdc) Z- / Z Z-40 / Z Test condition : 2000 Hrs Ambient temperature :+85 Applied voltage : Rated DC working voltage Each 0 hours,we will reserve the terminal and test the characteristics After test requirement at +20 Capacitance change : within 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. For Audio Equipment Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP CAP K K K-0K Diagram of Dimension:(unit:mm) D F d

156 NR Series Case Size WV(SV) V (8) (3) (20) (32) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple WV(SV) 35 (44) 50 (63) 63 (80) 0 () Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Ripple Current ( ma, rms ) at 5 20Hz 56

157 LR Series LR Series Snap-in Type 85 Features Snap-in design for audio equipment. Aluminum case designed explosion-proof vent. Non solvent-proof type For detail specifications, please refer to Engineering Bulletin NO. E54 RoHS Compliant Specifications Item Operating Temperature Range Rate voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Performance Characteristics -40~+85 to 0 VDC 680~33000 F 20%(20Hz,+20 ) I 0.02 CV( A) After 5 minute with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Working Voltage(VDC) D.F.(%)max For capacitance F,add 2% per another 00 F. Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max Z- / Z-40 / Test condition :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : % of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. For Audio Equipment Multiplier for Ripple Current vs. Frequency CAP( F) (Hz) 50(60) 20 K K 0K CAP CAP CAP Diagram of Dimensions:(unit:mm) Bottom Plate Negative 57

158 LR Series Case Size WV(SV) Cap( F) D (20) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple (32) Ripple Current ( A, rms ) at 85 20Hz 58

159 LR Series WV(SV) Cap( F) D 35 (44) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple (63) For Audio Equipment Ripple Current ( A, rms ) at 85 20Hz

160 LR Series WV(SV) Cap( F) D 63 (79) 80 (0) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Ripple Current ( A, rms ) at 85 20Hz 0

161 LR Series Cap( F) WV(SV) D 0 () Size Ripple Size Ripple Size Ripple Size Ripple Ripple Current ( A, rms ) at 85 20Hz For Audio Equipment

162 LP Series LP Series Snap-in Type 85 Features Directly mountable on printed circuit board, without holdors. Aluminum case designed explosion-proof vent. For detail specifications, please refer to Engineering Bulletin No. E6 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to to +85 Rated Voltage Range to 0 VDC 0 to 450 VDC Capacitance Range 470 to F 47 to 2700 F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Less than the value under table (%) 20% (20Hz, +20 ) I 0.02CV After 5 minutes with rated working voltage applied. F WVDC ~ ~35 50~63 80~0 0~0 35~450 47~ ~ ~ ~ ~ ~ Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max : : 2 Test conditions :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0 0 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) 2

163 LP Series Case Size WV(SV) (3) (20) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x52.8 WV(SV) Cap D ( F) 2200 (32) 35 (44) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 22x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Snap-in WV(SV) Cap D ( F) (63) 63 (79) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 22x x x x x x x x x x x x x4 3.2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 85 20Hz 3

164 LP Series WV(SV) 80 (0) 0 () Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x2. 22x x x x3.62 x x x3.65 x x x3.76 x x36.72 x x x x36.82 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) 0 (200) 200 (0) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 50 22x x2.2 22x2 22x x2 22x x x x26 22x x x x3.89 x x3.66 x x3.92 x x3.70 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) 220 (270) 0 (300) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 20 22x x x2 22x x x3.2 22x x x26. 22x3.36 x x3.30 x x x3.60 x x3.55 x x36.87 x x x x x x x36.65 x x x36 22x x x x x x4 2. x x x x x x x x x x46 2. x4 2. x x x x x x x x x x x x x x x x x x x x x x x x x x x x

165 LP Series WV(SV) 350 (400) 400 (450) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 47 22x x x x x3.03 x x x x3.07 x x3.02 x x36.08 x x36.26 x x x4.5 x x x4.46 x x x46.40 x x x x5.75 x x x x x27.75 x x x x x x32.88 x x x x x x x x x x x x x x x x WV(SV) 420 (470) 450 (500) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 47 22x x x x x x x x x x36.03 x x36.03 x x36.2 x3.2 22x4.9 x x4.32 x x x5.39 x x x x x5.52 x x x x x32.75 x x x x x x x x x x x x x x x x x x x x x Snap-in Ripple Current ( A, rms ) at 85 20Hz 5

166 LS Series LS Series Snap-in Type 85 Miniaturized Features Directly mountable on printed circuit board, without holders. Aluminum case designed explosion-proof vent. For detail specifications, please refer to Engineering Bulletin No. E38 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Less than the value under table (%) Impedance ratio at 20 Hz : 3 max Performance Characteristics - to to 450 VDC 47 to 2700 F 20% (20Hz, +20 ) I 0.02CV After 5 minutes with rated working voltage applied. F WVDC 0~0 35~450 47~ ~ Load Life Shelf Life Test conditions :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0 0 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) 6

167 LS Series Case Size WV(SV) Cap D ( F) 0 (200) 200 (0) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 50 22x x2.2 22x x x x x x x26.70 x x26.66 x x26.80 x x3.76 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 220 (270) 0 (300) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 20 22x x x x x x x26. x x26.23 x x3.50 x x3.47 x x3.70 x x x36.56 x x36.92 x x x36.75 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x Snap-in WV(SV) 350 (400) 400 (450) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 47 22x x x x x x x x x26.07 x x x x x3.26 x x x36.5 x3.5 30x x36.46 x x x4.40 x x x x4.75 x x x x x27.63 x x x x x x27.88 x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 85 20Hz 7

168 LS Series WV(SV) Cap D ( F) 420 (470) 450 (500) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 47 22x x x x x x x x x36.03 x x3.03 x x36.2 x3.2 22x36. x x4.32 x x x4.30 x x x x x46.45 x x x x x32.75 x x x x x37.98 x x x x x x x x x x x x Ripple Current ( A, rms ) at 85 20Hz 8

169 HP Series HP Series Snap-in Type 5 Features Highly reliable capacitors that with high ripple current. Terminal spacing fixed at mm for printed circuit board plug in. Aluminum case designed explosion-proof vent. Best for switching power supplies. For detail specifications, please refer to Engineering Bulletion No. E7 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 0 VDC 0 to 450 VDC Capacitance Range 330 to F 33 to 2200 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) I 0.02CV After 5 minutes with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Less than the value under table (%) F WVDC ~ ~35 50~63 80~0 0~0 35~450 47~ ~ ~ ~ ~ ~ Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max. Rated voltage(v) Z Z Test conditions :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Snap-in Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0 0 CAP CAP Diagram of Dimensions:(unit:mm) K K K-0K

170 Case Size WV(SV) Cap D ( F) (3) (20) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x26.53 x x x26.56 x x x x x x x x x3 22x x26 x x x x x3 22x x x x x x x x x x x x x x x x x5 3.5 x x x x4 3.2 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) (32) 35 (44) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x26 22x x x x26.48 x x26.80 x x x x3.92 x x26.88 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 50 (63) 63 (79) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x26 22x3..2 x x26 22x3..5 x x x x3.40 x x x3.65 x x x36.65 x x HP Series 22x3.85 x x x x x36.97 x x x x x x x x x x x x x x x x x x x x x x x x x x x5 3. x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 5 20Hz

171 HP Series WV(SV) 80 (0) 0 () Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x26 22x x x26 22x x26 22x x x26 22x x x3.02 x x x3.02 x26 x x3.26 x x x3 22x36..8 x3. 30x26. 22x36.38 x x x36.46 x x26 30x x4.65 x x x4.74 x x26 30x x x x x x46.95 x36 x x x27.95 x x x x4 x x3 30x x27 35x x x x5 2. x x x x x x37 4. x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 0 (200) 200 (0) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0 22x x x x x x x x x x3.03 x x x x x x36.2 x3.2 30x x3.09 x3. 30x26. 22x36.33 x x x x4.4 x x36.2 x3.2 30x x4.57 x x x x46.65 x x4.40 x x x x46.8 x x x x5.90 x x x46.64 x x x x x x x x x x x x x x x x32.85 x x x x46.85 x x x x x x x x x x x x x x x x x x x x x x x Snap-in WV(SV) Cap D ( F) 220 (270) 0 (300) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 68 22x x x x x x x x x x x x x x x x x36.00 x x x3.05 x x x4. x36. 30x x36.5 x3.5 30x x46.28 x x x x4. x x26. 22x46.48 x x x27.48 x x x46.35 x x x27.35 x x x32.76 x4.38 x x5.60 x x x27.60 x x x x56.70 x x x x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 5 20Hz

172 HP Series WV(SV) 400 (450) 420 (470) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 33 22x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x46.4 x4.4 30x x x46.02 x x x x x4.2 35x32.2 x x x x x x x x x x x x x x x x x x WV(SV) 450 (500) Cap D ( F) Size Ripple Size Ripple Size Ripple Size Ripple 33 22x x x x3 0.4 x x x x x x x x x x x x x x x x x x x36. 35x x x x x x x x Ripple Current ( A, rms ) at 5 20Hz 72

173 HS Series HS Series Snap-in Type 5 Miniaturized Features Highly reliable capacitors that withstand ripple current. Terminal spacing fixed at mm for printed circuit doard plug in. Aluminum case designed explosion-proof vent. Best for switching power supplies. For detail specifications, please refer to Engineering Bulletin No. E39 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Less than the value under table (%) Impedance ratio Max Performance Characteristics - to +5 0 to 450 V DC 33 to 2700 F 20% (20Hz, +20 ) I 0.02CV After 5 minutes with rated working voltage applied. F WVDC 0~0 35~450 47~ ~ Working voltage (VDC) Z - Z Load Life Shelf Life Test conditions :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Snap-in Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) 73

174 HS Series Case Size WV(SV) Cap D ( F) 0 (200) 200 (0) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 0 22x x x x x x x x x x26.03 x x x x x x3.2 x x x26. x26. 30x2. 22x3.39 x x x3.2 x x2.2 22x36.45 x x x x36.40 x x x36.60 x x x x4.64 x x x x4.80 x x x x x x27.85 x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 220 (270) 0 (300) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 68 22x x x x x x x x x x x x x x x x x x3.00 x x x3.0 x x x36. x3. 30x x3.09 x x x4.28 x x x36.8 x3.8 30x x4.48 x x x4.28 x x x46.65 x x x x46.52 x x x27.52 x x x x5.66 x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 350 (400) 400 (450) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 33 22x x x x x x x x x x x x x x x x x x x x x x x x x x x x x4.4 x x3.4 35x x46. x36. 30x3. x4.2 30x x x x x x x x x x x x x x x x x x x x x47.98 Ripple Current ( A, rms ) at 5 20Hz 74

175 HS Series WV(SV) Cap D ( F) 420 (470) 450 (500) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple 33 22x x x x x x x2 0.5 x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x3.08 x4.5 30x x x x x x x x x x x x x x x x x x52.8 Ripple Current ( A, rms ) at 5 20Hz Snap-in 75

176 HL Series HL Series Low ESR, Snap-in Type Features Highly reliable capacitors that withstand low ESR & long life. Two or three dimensions with same ratings. For detail specifications, please refer to Engineering Bulletin No. E28 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to +5 - to +5 Rated Voltage Range to 0 VDC 0 to 400 VDC Capacitance Range 560 to F 56 to 500 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) I 0.02CV After 5 minutes with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Less than the value under table (%) Working Voltrage(VDC) ~ ~ 400 D.F. (%) max Impedance ratio max. Working voltage (VDC), 35 50, 63 80, 0 0 to 400 Z - Z Z -40 Z Test conditions Ambient temperature Applied voltage :5000 Hrs :+5 :Rated DC working voltage After test requirements at +20 Capacitance change : % of the initial measured value Dissipation factor : 0% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirements at +20 : The same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency VDC( F) Frequency(Hz) 50 ~50 VDC ~0 VDC ,0 VDC ,400 VDC K K K Diagram of Dimensions:(unit:mm) 76

177 HL Series Case Size WV(SV) (3) Cap D ( F) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) (20) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) (32) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x x x x x x Snap-in WV(SV) Cap D ( F) 35 (44) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x x x x x x52 4. Ripple Current ( A, rms ) at 5 20Hz Max ESR (m ) at 20 30KHz 77

178 HL Series WV(SV) Cap D ( F) 50 (63) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x3. 98 x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 63 (79) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR 00 22x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 80 (0) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 0 () Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 5 20Hz Max ESR (m ) at 20 30KHz 78

179 HL Series WV(SV) Cap D ( F) 0 (200) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 200 (0) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR 80 22x x x x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) Cap D ( F) 0 (300) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR 50 22x x x x x x x x x x x x x5. 35 x x x x x x x x x x x Snap-in WV(SV) Cap D ( F) 350 (400) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR 68 22x x x x x x x x x x x x x x x x x x x5. 35x x x Ripple Current ( A, rms ) at 5 20Hz Max ESR (m ) at 20 30KHz 79

180 HL Series WV(SV) 400 (450) D Cap ( F) Size Ripple ESR Size Ripple ESR Size Ripple ESR Size Ripple ESR 56 22x x x x x x x x x x x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 5 20Hz Max ESR (m ) at 20 30KHz 80

181 LT Series LT Series 4 Terminals Snap-in Type 85 Features Highly capacitors values and compact size. Two vent construction. 4 sanp-in terminals for printed circuit board mounting. For detail specifications, please refer to Engineering Bulletin No. E3 RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 to 85 - ~ +85 Rated Voltage Range ~ 0 VDC 0 ~ 450 VDC Capacitance Range 4700 ~ F 330 ~ 3300 F Capacitance Tolerance 20% (20Hz, +20 ) Leakage Current (+20,max.) I 0.02 CV ( A) After 5 minutes with rated working voltage applied. Dissipation Factor (tan at 20 20Hz) Less than the value under table (%) WVDC ~ ~ D.F. (%) max D.F. (%) max Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio max. Working voltage (VDC) 35 ~ 0 0 ~ ~ 450 Z- Z Test conditions Ambient temperature Applied voltage :2000 Hrs :+85 :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 75% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None Snap-in After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0 0 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) 8

182 LT Series Case Size WV(SV) (20) (32) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x83 8. WV(SV) 35 (44) 50 (63) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x WV(SV) 63 (79) 80 (0) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x x WV(SV) 0 (0) 0 (200) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x WV(SV) 220 (270) 0 (300) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x WV(SV) 400 (450) 450 (500) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x Ripple Current ( A, rms ) at 85 20Hz

183 HT Series HT Series 4 Terminals Snap-in Type 5 Features Premium industrial grade. Long life 2000 Hrs at +5 with ripple current applied. Expected life : hrs at +65 with ripple current applied. Various case sizes and vent construction. For detail specifications, please refer to Engineering Bulletin No. E4 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Impedane ratio max Performance Characteristics - to +5 0 ~ 400 VDC 82 ~ 200 F 20% (20Hz, +20 ) I 0.02CV After 5 minutes with rated working voltage applied. Working voltage (VDC) Z - / Z % max. Load Life Shelf Life Test conditions :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None Snap-in After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0 0 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) 83

184 HT Series Case Size Size WV(SV) 0 (200) 200 (0) D Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x x x x x x x x x x x x WV(SV) D Cap( F) 0 (300) 400 (450) Size Ripple Size Ripple Size Ripple Size Ripple 82 30x x x x x x x x x x3. 30x5.8 35x x x x x x x x x x42.76 Ripple Current ( A, rms ) at 5 20Hz 84

185 RF Series RF Series Radial Type for Photo Flash Features RF Series is for photo flash applications that require not only superior volumetric efficiency, low dissipation factor and low leakage current. These capacitors effectively convert electrostatic energy into light. For detail specifications, please refer to Engineering Bulletin No. E RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Load Life Performance Characteristics -20 to VDC 0 ~ 450 F -% ~ +20% (20Hz, + ) I xc A max After 5 minutes with rated working voltage applied 8% max. Test conditions :5000 Times Ambient temperature :Room Temperature (5 ~ 35 ) Applied voltage :Charge and Dischatge Cycles : 30 Sec. After test requirements at + Capacitance change : % of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : 50% of the initial specified value Test conditions :00 Hrs Ambient temperature :+55 Applied voltage :None Shelf Life After test requirements at + Capacitance change : % of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : 50% of the initial specified value Diagram of Dimensions:(unit:mm) For Photo Flash D d F Please check with us about individual sizes and dimensions. 85

186 SF Series SF Series Snap-in Type for Photo Flash Features SF Series is for photo flash applications that require not only superior volumetric efficiency, low dissipation factor and low leakage current. These capacitors effectively convert electrostatic energy into light. For detail specifications, please refer to Engineering Bulletin No. E7 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Load Life Shelf Life Performance Characteristics -20 to VDC 50 ~ 500 F -% ~ +20% (20Hz, + ) I xc A max After 5 minutes 8% max. Test conditions :5000 Times Ambient temperature :Room Temperature (5 ~ 35 ) Applied voltage :Charge and Dischatge Cycles : 30 Sec. After test requirements at + Capacitance change : % of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : 50% of the initial specified value Test conditions :00 Hrs Ambient temperature :+55 Applied voltage :None After test requirements at + Capacitance change : % of the initial measured value Dissipation factor : 50% of the initial specified value Leakage current : 50% of the initial specified value Diagram of Dimensions:(unit:mm) Negative 86

187 SF Series Case Size Size D H 0.5 L 0. L2 0. W 0. W 0. W2 0. d Please check with us about individual size and dimensions. For Photo Flash 87

188 RP Series RP Series Screw Terminal Type 85 Features Load life: hours. High ripple capability. For detail specifications, please refer to Engineering Bulletin No. E40. RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 ~ ~ +85 Rated Voltage Range ~ 0 VDC 0 ~ 450 VDC Capacitance Range 3300 ~ F 220 ~ F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Less than the value under table (%) D WV % (20Hz, +20 ) I 0.02 CV After 5 minutes with rated working voltage applied WV D ~0 350~ Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio at 20 Hz :3 max :2 max Test conditions :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 5% of the initial value Dissipation factor : 75% of the specified value Leakage current : Not more than the specified value Test conditions :00 Hrs Ambient temperature :+85 Applied voltage :None Capacitance change : 5% of the initial value Dissipation factor : 75% of the specified value Leakage current : Not more than the specified value After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) ~ 50 WV 63 ~ 0 WV 0 ~ 450 WV K K Diagram of Dimensions:(unit:mm) D P

189 RP Series Case Size WV (SV) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x0.2 5x x x x x x x x0 5. 5x x x x x x x x x x x x x x x x x x0 35. WV (SV) 63 (79) 80 (0) 0 () 0 (200) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple 00 35x x x x x x x x x x x x x x x x x x20.3 5x x x x x x x x20. 5x x x x x x x WV (SV) (0) (300) (400) (450) (500) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x0 7.8 Ripple Current ( A, rms ) at 85 20Hz Screw Terminal 89

190 RH Series RH Series Screw Terminal Type 5 Features Load life: hours. High ripple capability. For detail specifications, please refer to Engineering Bulletin No. E4. RoHS Compliant Specifications Item Performance Characteristics Operating Temperature Range -40 ~ +5 - ~ +5 Rated Voltage Range ~ 0 VDC 0 ~ 400 VDC Capacitance Range 500 ~ 470,000 F 220 ~ F Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Less than the value under table (%) D WV % (20Hz, +20 ) I 0.02 CV After 5 minutes with rated working voltage applied WV D ~0 350~ Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Impedance ratio at 20 Hz :3 max :2 max Test conditions :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirements at +20 Capacitance change : 5% of the initial value Dissipation factor : 75% of the specified value Leakage current : Not more than the specified value Test conditions :00 Hrs Ambient temperature :+5 Applied voltage :None Capacitance change : 5% of the initial value Dissipation factor : 75% of the specified value Leakage current : Not more than the specified value After test requirements at +20 : Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) ~ 50 WV 63 ~ 0 WV 0 ~ 450 WV K K Diagram of Dimensions:(unit:mm) D P

191 RH Series Case Size WV (SV) (20) (32) 35 (44) 50 (63) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x x x x x x x x x x x x x x x x x0.3 5x x x x x x x x x x x x x x x x0.5 WV (SV) 63 (79) 80 (0) 0 () 0 (200) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple 00 35x x x x x x x x x x x x x x x x x x x x x x x x x x x20. 5x x x x x x40.0 WV (SV) 200 (0) 0 (300) 350 (405) 400 (450) Cap( F) Size Ripple Size Ripple Size Ripple Size Ripple x x x x60. 35x x x x x0.3 35x x x x20.7 5x x x x x x x x x x x x x x x x x x x x x x0 9.2 Ripple Current ( A, rms ) at 5 20Hz Screw Terminal 9

192 RL Series RL Series Screw Terminal Type, Long Life Features High ripple current Newly improved long life guaranteed for 5,000 hours load life at 5. Suited for the general-purpose inverter For detail specifications, please refer to Engineering Bulletin NO. E48 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Impedance ratio at 20 Hz :3 max :2 max Test conditions Ambient temperature Applied voltage Performance Characteristics - to WV 450WV 2200 to 8200 F 20%(20Hz,+20 ) I 0.02 CV After 5 minutes with rated working voltage applied. :5000 Hrs :+5 :Rated DC working voltage 0.2 max After test requirements at +20 Capacitance change : 20% of the initial value Dissipation factor : 200% of the specified value Leakage current : Not more than the specified value Shelf Life Test conditions Ambient temperature Applied voltage :00Hrs :+5 :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency W.V. Frequency(Hz) 50(60) 400 / 450V K.3 K.4 Diagram of Dimensions:(unit:mm) D P

193 RL Series Case Size WV (SV) 400 (450) 450 (500) Cap( F) Size Ripple Size Ripple x x x x x x x x x x x x x x Ripple Current ( A, rms ) at 5 20Hz Screw Terminal 93

194 WF Series WF Series Flame Retardant Type at 85 Features Flame Retardant type capacitor Used in communication equipments, switching power supply, etc. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin NO. E0 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Working Voltage(VDC) D.F.(%)max Impedance ratio max Working Voltage(VDC) Z- / Z Performance Characteristics - to VDC 2.2 to 20 F 20%(20Hz,+20 ) I 0.03 CV ( A)After minute with rated working voltage applied. Test condition :2000 Hrs Ambient temperaturev :+85 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factorv : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d (L 35.5) 2 (L 35.5) 2 94

195 WF Series Case Size WV (SV) 400V 450V Cap( F) (450) (500) Size Ripple Size Ripple 2.2 8X.5 30 X X 40 X X 60 X 50 3X20 0 3X X 70 X X 2 X X X X X X X X X Ripple Current ( A, rms ) at 85 20Hz Flame Retardant 95

196 MF Series MF Series Flame Retardant Type at 5 Features Flame Retardant type capacitor with high temperature.. Used in communication equipments, switching power supply, etc. Safety vent construction design. For detail specifications, please refer to Engineering Bulletin NO. E9 RoHS Compliant Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characteristics (at 20Hz) Load Life Shelf Life Working Voltage(VDC) D.F.(%)max Impedance ratio max Working Voltage(VDC) Z- / Z Performance Characteristics - to VDC 2.2 to 80 F 20%(20Hz,+20 ) I 0.03 CV ( A)After minute with rated working voltage applied. Test condition :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) D F d (L 35.5) 2 (L 35.5) 2 96

197 MF Series Case Size WV (SV) 400V (450) 450V (500) Cap( F) Size Ripple Size Ripple 2.2 X X X 36 X X 55 X X 90 X20 65 X20 3X X 90 3X 5 33 X 220 X X X X X X X X X X X X X Ripple Current ( A, rms ) at 5 20Hz Flame Retardant 97

198 LF Series LF Series Flame Retardant Type at 85 Features Flame Retardant type capacitor Used in switching power supplies, etc. Aluminal case designed explosion-proof vent. RoHS Compliant For detail specifications, please refer to Engineering Bulletin NO. E Specifications Item Operating Temperature Range Rate Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characterisrics (at 20Hz) Load Life Shelf Life Less than the value under table (%) Impedance ratio max. Performance Characteristics - to VDC 47 to 560 F 20%(20Hz,+20 ) I 0.02 CV ( A)After 5 minute with rated working voltage applied. Working Voltage(VDC) D.F.(%)max. Working Voltage(VDC) Z- / Z+20 2 Test condition :2000 Hrs Ambient temperature :+85 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+85 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP CAP K..7 K K-0K Diagram of Dimensions:(unit:mm) 98

199 LF Series Case Size Cap ( F) WV (SV) D 400 (450) 450 (500) Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Size Ripple Ripple Current ( A, rms ) at 85 20Hz Flame Retardant 99

200 HF Series HF Series Flame Retardant Type at 5 Features Flame Retardant type capacitor with high temperature. Best for switching power supplies, etc. Aluminal case designed explosion-proof vent. RoHS Compliant For detail specifications, please refer to Engineering Bulletin NO. E2 Specifications Item Operating Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current (+20,max.) Dissipation Factor (tan at 20 20Hz) Low Temperature Characterisrics (at 20Hz) Load Life Shelf Life Less than the value under table (%) Impedance ratio max. Performance Characteristics - to VDC 33 to 560 F 20%(20Hz,+20 ) I 0.02 CV ( A)After 5 minute with rated working voltage applied. Working Voltage(VDC) D.F.(%)max. Working Voltage(VDC) Z- / Z+20 2 Test condition :2000 Hrs Ambient temperature :+5 Applied voltage :Rated DC working voltage After test requirement at +20 Capacitance change : 20% of the initial measured value Dissipation factor : 200% of the initial specified value Leakage current : The initial specified value Test condition :00 Hrs Ambient temperature :+5 Applied voltage :None After test requirement at +20 :Same limits as Load life. Pre-treatment for measurements shall be conducted after application of DC working voltage for 30 minutes. Multiplier for Ripple Current vs. Frequency CAP( F) Frequency(Hz) 50(60) CAP 0.8 CAP CAP K K K-0K Diagram of Dimensions:(unit:mm) 200