Sight Glass and Moisture Indicator Virginia KMP Series LDE
|
|
|
- Gordon Collins
- 6 years ago
- Views:
Transcription
1 Sight Glass and Moisture Indicator Virginia KMP LDE DIMENSIONS: Dimension Dimension Connection Type "A" "B" Inches (mm) Inches (mm) LDE2 1/4 Male X 1/4 Male 2-7/ / 36 LDE2S 1/4 Sweat X 1/4 Sweat / 36 LDE2MF 1/4 Male X 1/4 Female / 36 LDE3 Male X Male / 36 LDE3S Sweat X Sweat / 36 LDE3MF Male X Female 3-1/ / 36 LDE4 Male X Male 4-1/ / 36 LDE4S Sweat X Sweat / 36 LDE4MF Male X Female 3-7/ / 36 LDE5 Male X Male 4-1/ / 36 LDE5S Sweat X Sweat / 36 LDE5MF Male X Female 3-7/ / 36 LDE6 3/4 Male X 3/4 Male /32 52 LDE6S 3/4 Sweat X 3/4 Sweat /32 52 LDE7S 7/8 Sweat X 7/8 Sweat /32 52 LDE9S 1-1/8 Sweat X 1-1/8 Sweat /32 52 NON-WARRANTY - All data, statements and recommendations contained herein are based upon the best information available and are believed to be reliable. However, no warranty, either expressed or implied, is made concerning the application of this product since the customer's use cannot be controlled. Statements concerning the use of this product should not be construed as suggestions, recommendations or inducements that it be used in violation of patent rights or in violation of any applicable laws or regulations. Product improvement is a continuous process at Virginia KMP Corp., therefore, product specifications may change without notice. Please contact your VKMP representative or distributor to verify details. Hong Kong Tel: Fax: France Tel: Fax: Germany Tel: Fax: Italy Tel: Fax: Virginia KMP Corp. 00 Platinum Way Dallas, Texas 237 USA Tel: Fax: info@virginiakmp.com Website: England Tel: Fax: Copyright 1999 Virginia KMP Corp. LDE - Version 3 - /99
2 Virginia KMP WLD The World WLD model is our premium liquid line filter drier. The internal construction of the WLD series driers has been designed to enhance performance and dependability. The use of carefully selected desiccants makes the WLD series filter drier compatible with CFC, HCFC and HFC refrigerants and the lubricants used in conjunction with them. The desiccant provides for extraordinarily high moisture capacity and acid removal. A larger volume of filter media before and after the desiccant provides for increased holding capacity of particulate matter down to 10 microns in size. Both the filter media and desiccant are protected from impact by an inlet baffle which also aids in reducing the entering refrigerant velocity and directs the flow evenly over the filter media. All of the internal components are held firmly in place by a cylindrical spring which also provides rigid compacting of the desiccant. Availability with solder or flare connectors, in inch or millimeter sizes, expands the versatility of this filter drier to meet a broad range of installation requirements. These units may also be special ordered with the optional -O o-ring connector. Manufactured in the USA in our ISO 9001 registered facility, the World driers are UL listed (SA1906) and CSA approved (LR494), and are rated per the ARI standard. Intended for worldwide application, a World filter drier available in Europe or Asia is identical to those in North America, so wherever the equipment came from or wherever it goes - exact WLD filter driers will be available. CHARACTERISTICS: Compacted bead, spring loaded design. Superior moisture removal capacity. Acid removal capability. Very low pressure drop. Filtration down to 10 microns. Hard wrought copper connectors. Large wrench flats on flare connectors. Available in inch or millimeter sizes. Standard lay-in lengths. Highly shock resistant design. Powder coated finish is 1000 hours salt spray rated. 500 psig (35 bar) safe working pressure. -MI OPTION The WLD, WAH and V2A series may be special ordered with a moisture indicator built into the outlet shell closure. This indicator changes color from blue to pink, showing the technician when the drier needs to be replaced. To order, simply add the -MI suffix to the part number (eg. WLD3SMI). APPLICATIONS: For installation in the liquid line of any air conditioning or refrigeration system which requires the maximum protection from, or removal of moisture, contaminants and dirt. COMPATIBILITY: CFC, HCFC and HFC refrigerants. Mineral oils, alkylbenzene (AB), polyol ester (POE) and polyalkylene glycol (PAG) lubricants.
3 Virginia KMP WLD DIMENSIONS: "B" "C" "A" Cu. In. Fitting Type Overall Length Dimensions: Inches (Millimeters) Diameter Lay-in Length " A" " B" "C" WLD /4 4-1/ 4 ( 108) WLD032FM 3 1/4 Female X Male 4-1/ 4 ( 108) WLD032MF 3 1/4 Male X Female 4-1/ 4 ( 108) WLD032S 3 1/4 4-1/ ( 103) 3-7/ (87) WLD06MM 3 6mm 4-1/ ( 103) 3-7/ (87) WLD / 4 ( 121) WLD033S 3 4-1/ ( 103) 3-7/ (87) WLD /4 4-5/ 8 ( 118) WLD052MF 5 1/4 Male X Female 4-5/ 8 ( 118) WLD052S 5 1/4 4-7/ ( 113) 3-13/ (97) WLD0506MM 5 6mm 4-7/ ( 113) 3-13/ (97) WLD0525S 5 5/ 4-7/ ( 113) 3-13/ (97) WLD / 8 ( 1) WLD053S 5 4-1/ 2 ( 114) 3-3/ 4 (95) WLD0510MM 5 10mm 4-1/ 2 ( 114) 3-3/ 4 (95) WLD /4 4-1/ 2 ( 140) WLD082S 8 1/4 5-5/ 4-11/ WLD0806MM 8 6mm 5-5/ 4-11/ 119 WLD0825S 8 5/ 5-5/ 4-11/ 119 WLD ( 152) WLD083S 8 5-5/ 4-11/ WLD0810MM 8 10mm 5-5/ 4-11/ WLD / ( 157) WLD084S 8 5-5/ 4-11/ WLD0812MM 8 12mm 5-5/ 4-11/ WLD2 1/4 6-1/ 4 ( 159) WLD2S 1/4 6-1/ 5-7/ (138) WLD25S 5/ 6-1/ 5-7/ (138) WLD3 6-3/ 4 ( 172) WLD3S 6-1/ 5-7/ (138) WLD10MM 10mm 6-1/ 5-7/ (138) WLD4 6-15/ ( 176) WLD4S 6-1/ 5-3/ 8 (137) WLD12MM 12mm 6-1/ 5-3/ 8 (137) WLD5 7-1/ 4 ( 184) WLD5S 6-5/ ( 0) 5-5/ (135) WLD3 9-3/ 4 ( 248) WLD3S 9-1/ 8 ( 232) 8-7/ (214) WLD4 9-15/ ( 253) WLD4S 9-1/ 8 ( 232) 8-3/ 8 (213) WLD12MM 12mm 9-1/ 8 ( 232) 8-3/ 8 (213) WLD5 10-1/ 4 ( 260) WLD5S 9-5/ 8 ( 245) 8-15/ (211) WLD7S 7/8 10-3/ ( 259) 8-5/ 8 (219)
4 Virginia KMP WLD DIMENSIONS: Cu. In. Fitting Type Overall Length Dimensions: Inches (Millimeters) Diameter Lay-in Length " A" " B" "C" WLD3 9-7/ 8 ( 251) WLD3S 9-1/ 4 ( 235) 8-1/ 2 (2) WLD4 10-1/ ( 256) WLD4S 9-1/ 4 ( 235) 8-1/ 2 (2) WLD12MM 12mm 9-1/ 4 ( 235) 8-1/ 2 (2) WLD5 10-3/ 8 ( 264) WLD5S 9-3/ 4 ( 248) 8-7/ (214) WLD7S 7/8 10-5/ ( 260) 8-3/ 4 (222) WLD4 13-1/ 2 ( 342) WLD4S 13-1/ ( 331) 11-7/ 8 (1) WLD5 13-3/ 4 ( 349) WLD5S 12-7/ 8 ( 327) 11-7/ 8 (1) WLD6 3/4 14-7/ ( 366) WLD6S 3/4 13-1/ 8 ( 333) 11-7/ 8 (1) WLD7S 7/8 13-3/ 4 ( 349) 12-1/ (6) WLD9S 1-1/8 14 ( 356) 12-3/ (310) FLOW CAPACITY: Due to the revision of ARI , pressure drop ratings have decreased from 2 psig to 1 psig. This has resulted in lower flow capacities than in previously published manufacturer s specs. R-12 R-22 Flow Capacity in 1 psid 0.07 bar) per ARI Rating Conditions R-134a R-404A /R-507 R-407C R-502 WLD 032 (FM) (MF) (S) 1. 3 ( 4.7) 1. 7 ( 5.9) 1. 7 ( 5.9) 1. 2 (4.2) WLD 06MM 1. 3 ( 4.7) 1. 7 ( 5.9) 1. 7 ( 5.9) 1. 2 (4.2) WLD 033 (S) 3. 3 ( 5) 4. 5 ( 9) 4. 2 ( 6) 3. 2 ( 2) 4. 5 ( 9) 3 (5) WLD 052 (MF) (S) 1. 4 ( 5.0) 2 ( 6.9) 1. 8 ( 6.3) 2 ( 6.9) 1. 3 (4.6) WLD 0506MM 1. 4 ( 5.0) 2 ( 6.9) 1. 8 ( 6.3) 2 ( 6.9) 1. 3 (4.6) WLD 0525S 2. 1 ( 7.2) 2. 8 ( 0) 2. 6 ( 9.1) 2. 5 ( 9.0) 2. 8 ( 0) 1. 8 (6.6) WLD 053 (S) 3. 7 ( 13.0) 5. 1 ( 17.9) 4. 7 (.4) 3. 6 ( 7) 5. 1 ( 17.9) 3. 3 (8) WLD 0510MM 3. 7 ( 13.0) 5. 1 ( 17.9) 4. 7 (.4) 3. 6 ( 7) 5. 1 ( 17.9) 3. 3 (8) WLD 082 (S) 1. 6 ( 5.4) 1. 9 ( 6.9) 1. 5 ( 5.3) 1. 4 (5.0) WLD 0806MM 1. 6 ( 5.4) 1. 9 ( 6.9) 1. 5 ( 5.3) 1. 4 (5.0) WLD 0825S 2. 3 ( 8.3) 3. 3 ( 5) 3. 0 ( 5) 3 ( 5) 3. 3 ( 6) 2. 1 (7.6) WLD 083 (S) 3. 8 ( 13.4) 5. 2 ( 18.4) 4. 8 (.8) 3. 7 ( 13.0) 5. 2 ( 18.4) 3. 5 (2) WLD 0810MM 3. 8 ( 13.4) 5. 2 ( 18.4) 4. 8 (.8) 3. 7 ( 13.0) 5. 2 ( 18.4) 3. 5 (2) WLD 084 (S) 5. 7 ( 20.2) 7. 9 ( 27.9) 7. 2 ( 25.5) 5. 6 ( 19.7) 7. 9 ( 27.9) 5. 2 (18.4) WLD 0812MM 5. 7 ( 20.2) 7. 9 ( 27.9) 7. 2 ( 25.5) 5. 6 ( 19.7) 7. 9 ( 27.9) 5. 2 (18.4) WLD 2 (S) 1. 6 ( 5.4) 1. 9 ( 6.9) 1. 5 ( 5.3) 1. 4 (5.0) WLD 25S 2. 5 ( 8.6) 3. 4 ( 0) 3. 1 ( 9) 3. 1 ( 9) 3. 4 ( 0) 2. 3 (7.9) WLD 3 (S) 4. 2 ( 8) 5. 8 ( 20.4) 5. 3 ( 18.7) 4. 1 ( 4) 5. 8 ( 20.4) 3. 8 (13.4) WLD 10MM 4. 2 ( 8) 5. 8 ( 20.4) 5. 3 ( 18.7) 4. 1 ( 4) 5. 8 ( 20.4) 3. 8 (13.4) WLD 4 (S) 7. 6 ( 26.7) 9. 5 ( 33.7) 7. 4 ( 26.0) 6. 9 (24.3) WLD 12MM 7. 6 ( 26.7) 9. 5 ( 33.7) 7. 4 ( 26.0) 6. 9 (24.3) WLD 5 (S) 2 ( 35.9) 1 ( 49.5) 9 ( 45.3) 10 ( 35.0) 1 ( 49.5) 9. 3 (32.6) WLD 3 (S) 4. 3 ( 1) 5. 9 ( 20.9) 5. 4 ( 19.1) 5. 4 ( 19.0) 5. 9 ( 20.9) 3. 9 (13.8) WLD 4 (S) 8. 3 ( 29.2) 5 ( 40.3) 8. 1 ( 28.5) 5 ( 40.3) 7. 6 (26.6) WLD 12MM 8. 3 ( 29.2) 5 ( 40.3) 8. 1 ( 28.5) 5 ( 40.3) 7. 6 (26.6) WLD 5 (S) 5 ( 37.1) 6 ( 51.3) ( 46.9) 3 ( 36.2) 6 ( 51.3) 9. 6 (33.8) WLD 7S 8 ( 45.0) ( 62.2). 2 ( 56.9) 5 ( 44.0) ( 62.2) 7 (.0) WLD 3 (S) 4. 5 ( 7) 6. 2 ( 21.6) 5. 7 ( 19.8) 5. 6 ( 19.6) 6. 2 ( 21.6) 4 (3) WLD 4 (S) 8. 7 (.6) 12 ( 42.3) 0 ( 38.7) 8. 5 ( 29.9) 12 ( 42.3) 7. 9 (27.9) WLD 12MM 8. 7 (.6) 12 ( 42.3) 0 ( 38.7) 8. 5 ( 29.9) 12 ( 42.3) 7. 9 (27.9) WLD 5 (S) 3 ( 39.7) 6 ( 54.7) 2 ( 50.1) 11 ( 38.7) 6 ( 54.7) 3 (36.1) WLD 7S 9 ( 55.9) ( 77.1) ( 70.5) 5 ( 54.5) ( 77.1) 4 (50.8) WLD 4 (S) 9. 8 ( 34.5) ( 47.5) 4 ( 43.5) 9. 8 ( 34.5) ( 47.5) 8. 9 (31.3) WLD 5 (S) 4 ( 43.8) ( 60.5) 7 ( 55.9) 1 ( 42.5) ( 60.5) 3 (39.7) WLD 6 (S) 4 ( 50.4) ( 69.4) ( 63.4) ( 48.9) ( 69.4) 13 (45.8) WLD 7S. 9 ( 59.5) ( 82.1) (.1). 5 ( 58.1) ( 82.1) 4 (54.1) WLD 9S ( 86.6) ( 119.4) ( 109.2) 24 ( 84.4) ( 119.4) (78.7)
5 Virginia KMP WLD LIQUID HOLDING CAPACITY: R-12 R-22 Liquid Refrigerant Holding Capacity in 100 F 40 C) R-134a R-404A / R-507 R-407C R-502 WLD ( 99) 3. 2 ( 91) 3. 2 ( 91) 2. 7 ( 77) 3. 0 ( 85) 3. 3 (94) WLD ( 119) 3. 8 ( 108) 3. 8 ( 108) 3. 2 ( 91) 3. 6 ( 102) 3. 9 (111) WLD ( 238) 7. 6 ( 215) 7. 7 ( 218) 6. 5 ( 184) 7. 2 ( 204) 7. 8 (221) WLD 4 ( 295) 9. 4 ( 266) 9. 5 ( 269) 8. 0 ( 227) 8. 9 ( 252) 9. 7 (2) WLD ( 799) ( 723) ( 729) ( 618) ( 683) (743) WLD ( 1080) ( 978) ( 987) ( 836) ( 924) (1004) WLD ( 1581) ( 1431) ( 1443) ( 1225) ( 1355) (1471) MOISTURE HOLDING CAPACITY: Drying Capacity in Drops (Grams) of Water R-12 R-22 R-134a F ( 24 C) F ( 52 C) F ( 24 C) F ( 52 C) F ( 24 C) F (52 C) WLD ( 4.6) ( 4.3) ( 3.9) ( 3.4) ( 4.5) 85 (4.2) WLD ( 8.0) ( 7.4) ( 6.8) ( 5.9) ( 7.8) 148 (7.4) WLD ( 18.8) ( 17.4) ( 8) ( 13.9) ( 18.2) 346 (17.3) WLD 5 0 ( 25.5) ( 23.6) 4. 0 ( 21.5) ( 18.9) ( 24.7) 469 (23.4) WLD 9 0 ( 45.7) ( 42.2) ( 38.4) ( 33.8) ( 44.2) 839 (.9) WLD ( 74.0) ( 68.4) ( 62.2) ( 54.7) ( 71.5) 1357 (67.8) WLD ( 134.6) ( 124.3) ( 113.1) ( 99.5) ( 1.0) 2467 (123.3) R-404A/R-507 Drying Capacity in Drops (Grams) of Water R-407C R-502 F ( 24 C) F ( 52 C) F ( 24 C) F ( 52 C) F ( 24 C) F (52 C) WLD ( 3.5) ( 3.3). 0 ( 3.7) ( 3.3) ( 3.9) 70 (3.5) WLD ( 6.0) 1. 0 ( 5.8) ( 6.5) 1 0 ( 6.5) ( 6.8) 121 (6.0) WLD ( 1) ( 13.5) 4. 0 ( 2) ( 13.3) (.0) 282 (1) WLD ( 19.1) ( 18.3) 3. 0 ( 20.6) ( 18.1) ( 21.7) 382 (19.1) WLD ( 34.2) ( 32.7) ( 36.9) ( 32.4) ( 38.8) 683 (34.1) WLD ( 55.3) ( 53.0) ( 59.7) ( 52.5) ( 62.8) 1105 (55.2) WLD 20 0 ( 100.5) ( 96.3) ( 108.6) 19 0 ( 95.5) ( 12) 2009 (100.4) NON-WARRANTY - All data, statements and recommendations contained herein are based upon the best information available and are believed to be reliable. However, no warranty, either expressed or implied, is made concerning the application of this product since the customer's use cannot be controlled. Statements concerning the use of this product should not be construed as suggestions, recommendations or inducements that it be used in violation of patent rights or in violation of any applicable laws or regulations. Product improvement is a continuous process at Virginia KMP Corp., therefore, product specifications may change without notice. Please contact your VKMP representative or distributor to verify details. Virginia KMP Corp. 00 Platinum Way Dallas, Texas 237 USA Tel: Fax: info@virginiakmp.com Hong Kong Tel: Fax: France Tel: Fax: Germany Tel: Fax: Italy Tel: Fax: England Tel: Fax: Copyright 1999 Virginia KMP Corp. WLD - Version 3-3/9/99
6 Suction Line Filter Driers Virginia KMP WSL The Virginia KMP World WSL suction line filter drier is designed for use with most refrigerant/lubricant combinations. The WSL has been designed to provide a minimal pressure drop at the high flow rates of suction gas. Filtration of particles down to 10 microns in size is accomplished by both inlet and outlet filter pads. The WSL has been designed so that refrigerant will travel through the sides of the filter media to maximize filtration and to prevent "front end loading", maintaining a low pressure drop across the vessel. Acid and moisture removal is accomplished by a large volume of activated alumina in the heart of the filter drier. Internal components, including the desiccant bed, baffle, spider bracket and the inlet and outlet filter media, are compressed and held firmly in place by a special cylindrical spring applying pressure to the inlet and outlet retention screens. Availability with solder or flare connections, in inch or millimeter sizes, expands the versatility of this filter drier to meet a broad range of industry requirements. Manufactured in the USA in our ISO 9001 registered facility, the World driers are UL listed (SA1906) and CSA approved (LR494), and are rated per the ARI 7-86 standard. Intended for worldwide application, a World filter drier available in Europe or Asia is identical to those in North America, so wherever the equipment came from or wherever it goes - exact WSL filter driers will be available. CHARACTERISTICS: Compacted bead, spring loaded design. Exceptional acid and particulate removal. Very low pressure drop. Filtration down to 10 microns. Designed for permanent installation. Hard copper sweat connectors. Large wrench flats on flare connectors. Standard lay-in lengths. Shock resistant design. Powder coat finish is 1000 hours salt spray test rated. Access port on the inlet side. 2 psig (21 bar) safe working pressure. APPLICATIONS: Designed for installation in the suction line of any refrigeration or air conditioning application to provide system protection or cleanup from moisture, contaminants, dirt and acid. Recommended for retrofit applications to trap dirt and particles released by the solvent action of the new lubricants. COMPATIBILITY: CFC, HCFC and HFC refrigerants. Mineral oils, alkylbenzene (AB), polyol ester (POE), and polyalkylene glycol (PAG) lubricants.
7 Suction Line Filter Driers Virginia KMP WSL DIMENSIONS: Dimensions: Inches (Millimeters) Cu. Fitting In. Type Overall Length Diameter Lay-in Length "A" "B" "C" WSL-3 6-3/4 (171) 2- (63) WSL-3S 6-1/ (154) 2- (63) 5-7/ (138) WSL / (176) 2- (63) WSL-4S 6-1/ (154) 2- (63) 5-7/ (138) WSL-5 7-1/4 (184) 2- (63) WSL-5S 6-5/ (0) 2- (63) 5-5/ (135) WSL-6S 3/4 6-9/ (7) 2- (63) 5-5/ (135) WSL-7S 7/8 7-1/ (179) 2- (63) 5-9/ (1) WSL-5S 7-15/ (202) 3 (76) 6-15/ (176) WSL-6S 3/4 7-15/ (202) 3 (76) 6-11/ (170) WSL-7S 7/8 8-7/ (214) 3 (76) 6-15/ (176) WSL-9S 1-1/8 10- (270) 3- (89) 8-13/ (224) WSL-11S / (360) 3- (89) 12-1/4 (311) WSL-13S / (367) 3- (89) 12-1/4 (311) FLOW CAPACITY: Tons (kw) Refrigerant 12 Refrigerant F +20 F 0 F -20 F +40 F +20 F 0 F -20 F 2 P 1.5 P 1 P 0.5 P 3 P 2 P 1.5 P 1 P WSL (1.5) 0.3 (1.0) 0.2 (0.6) 0.1 (0.3) 0.8 (2.7) 0.5 (1.8) 0.3 (1.2) 0.2 (0.8) WSL-3S 0.5 (1.8) 0.3 (1.2) 0.2 (0.8) 0.1 (0.4) 0.9 (3.2) 0.6 (2.1) 0.4 (1.4) 0.3 (0.9) WSL (3.2) 0.6 (2.2) 0.4 (1.4) 0.2 (0.7) 1.7 (5.8) 1.1 (3.8) 0.7 (2.6) 0.5 (1.6) WSL-4S 1.0 (3.6) 0.7 (2.4) 0.4 (1.5) 0.2 (0.8) 1.8 (6.4) 1.2 (4.2) 0.8 (2.8) 0.5 (1.8) WSL (5.1) 1.0 (3.5) 0.6 (2.2) 0.3 (1.2) 2.6 (9.1) 1.7 (6.0) 1.2 (4.1) 0.7 (2.6) WSL-5S 1.5 (5.2) 1.0 (3.5) 0.6 (2.2) 0.3 (1.2) 2.7 (9.3) 1.7 (6.1) 1.2 (4.1) 0.7 (2.6) WSL-6S 1.8 (6.4) 1.3 (4.4) 0.8 (2.8) 0.4 (1.5) 3.3 (6) 2.2 (7.6) 1.5 (5.1) 0.9 (3.2) WSL-7S 1.9 (6.8) 1.3 (4.7) 0.8 (3.0) 0.5 (1.6) 3.5 (3) 2.3 (8.0) 1.6 (5.5) 1.0 (3.4) WSL-5S 2.5 (8.8) 1.7 (6.0) 1.1 (3.8) 0.6 (2.0) 4.5 (8) 2.9 (3) 2.0 (7.0) 1.3 (4.4) WSL-6S 3.1 (7) 2.1 (7.3) 1.3 (4.6) 0.7 (2.5) 5.5 (19.3) 3.6 (6) 2.4 (8.6) 1.5 (5.4) WSL-7S 4.7 (.6) 3.2 (3) 2.0 (7.2) 1.1 (3.8) 8.5 (29.9) 5.5 (19.5) 3.8 (13.3) 2.4 (8.3) WSL-9S 6.1 (21.5) 4.2 (7) 2.6 (9.3) 1.4 (5.0) 0 (38.7) 7.2 (25.2) 4.9 (17.2) 3.1 (8) WSL-4511S 8.9 (31.3) 6.1 (21.3) 3.8 (13.5) 2.1 (7.2).0 (56.3) 4 (36.7) 7.1 (25.0) 4.5 (7) WSL-13S 1 (39.1) 7.6 (26.7) 4.8 (.9) 2.6 (9.1) 20.0 (70.3) 13.0 (45.8) 8.9 (31.2) 5.6 (19.6)
8 Suction Line Filter Driers Virginia KMP WSL FLOW CAPACITY: Tons (kw) Refrigerant 502 Refrigerant 134a +20 F 0 F -20 F -40 F +40 F +20 F 0 F -20 F 3 P 2 P 1.5 P 1 P 2 P 1.5 P 1 P 0.5 P WSL (1.7) 0.3 (1.1) 0.2 (0.7) 0.1 (2.6) 0.5 (1.8) 0.3 (1.1) 0.2 (0.7) 0.1 (0.4) WSL-3S 0.6 (2.0) 0.4 (1.3) 0.2 (0.8) 0.1 (3.0) 0.6 (2.1) 0.4 (1.4) 0.2 (0.7) 0.1 (0.4) WSL (3.7) 0.7 (2.4) 0.4 (1.6) 0.3 (5.5) 1.0 (3.5) 0.7 (2.5) 0.4 (1.4) 0.2 (0.7) WSL-4S 1.2 (4.1) 0.7 (2.6) 0.5 (1.7) 0.3 (6.0) 1.2 (4.2) 0.8 (2.8) 0.5 (1.8) 0.2 (0.7) WSL (5.9) 1.1 (3.7) 0.7 (2.5) 0.4 (8.6) 1.7 (6.0) 1.1 (3.9) 0.7 (2.5) 0.4 (1.4) WSL-5S 1.7 (6.0) 1.1 (3.8) 0.7 (2.5) 0.4 (8.8) 1.7 (6.0) 1.1 (3.9) 0.7 (2.5) 0.4 (1.4) WSL-6S 2.1 (7.5) 1.3 (4.7) 0.9 (3.1) 0.5 (0) 2.1 (7.4) 1.4 (4.9) 0.9 (3.2) 0.5 (1.8) WSL-7S 2.3 (7.9) 1.4 (5.0) 0.9 (3.3) 0.6 (6) 2.2 (7.7) 1.5 (5.3) 0.9 (3.2) 0.5 (1.8) WSL-5S 2.9 (2) 1.8 (6.5) 1.2 (4.2) 0.7 (9) 2.9 (2) 1.9 (6.7) 1.2 (4.2) 0.6 (2.1) WSL-6S 3.5 (5) 2.2 (7.9) 1.5 (5.2) 0.9 (18.3) 3.5 (3) 2.3 (8.1) 1.4 (4.9) 0.8 (2.8) WSL-7S 5.5 (19.3) 3.5 (2) 2.3 (8.0) 1.4 (28.2) 5.4 (19.0) 3.6 (7) 2.2 (7.7) 1.2 (4.2) WSL-9S 7.1 (24.9) 4.5 (8) 3.0 (4) 1.8 (36.5) 7.0 (24.6) 4.7 (.5) 2.9 (2) 1.5 (5.3) WSL-4511S 3 (36.2) 6.5 (22.9) 4.3 (1) 2.6 (53.1) 2 (35.9) 6.8 (23.9) 4.2 (8) 2.2 (7.7) WSL-13S 9 (45.3) 8.2 (28.7) 5.4 (18.9) 3.3 (66.4) 7 (44.7) 8.5 (29.9) 5.2 (18.3) 2.7 (9.5) Refrigerant 407C Refrigerant 404A / F 0 F -20 F -40 F +20 F 0 F -20 F -40 F 3 P 2 P 1.5 P 1 P 3 P 2 P 1.5 P 1 P WSL (2.6) 0.5 (1.6) 0.3 (1.1) 0.2 (0.7) 0.5 (1.8) 0.3 (1.1) 0.2 (0.7) 0.1 (0.4) WSL-3S 0.9 (3.0) 0.5 (1.9) 0.4 (1.3) 0.2 (0.8) 0.6 (2.2) 0.4 (1.3) 0.2 (0.9) 0.1 (0.5) WSL (5.5) 1.0 (3.5) 0.7 (2.3) 0.4 (1.4) 1.1 (4.0) 0.7 (2.4) 0.5 (1.6) 0.3 (1.0) WSL-4S 1.7 (6.1) 1.1 (3.9) 0.7 (2.6) 0.4 (1.6) 1.2 (4.4) 0.8 (2.7) 0.5 (1.8) 0.3 (1.1) WSL (8.7) 1.6 (5.5) 1.0 (3.7) 0.6 (2.2) 1.8 (6.2) 1.1 (3.8) 0.7 (2.5) 0.4 (1.5) WSL-5S 2.5 (8.8) 1.6 (5.6) 1.1 (3.7) 0.6 (2.3) 1.8 (6.4) 1.1 (3.9) 0.7 (2.6) 0.4 (1.5) WSL-6S 3.1 (0) 2.0 (7.0) 1.3 (4.6) 0.8 (2.8) 2.3 (7.9) 1.4 (4.8) 0.9 (3.2) 0.5 (1.9) WSL-7S 3.3 (7) 2.1 (7.4) 1.4 (4.9) 0.9 (3.0) 2.4 (8.4) 1.5 (5.1) 1.0 (3.4) 0.6 (2.0) WSL-5S 4.3 (0) 2.7 (9.5) 1.8 (6.3) 1.1 (3.9) 3.1 (8) 1.9 (6.6) 1.2 (4.4) 0.7 (2.6) WSL-6S 5.2 (18.4) 3.3 (7) 2.2 (7.7) 1.3 (4.7) 3.8 (13.2) 2.3 (8.1) 1.5 (5.3) 0.9 (3.2) WSL-7S 8.1 (28.4) 5.1 (18.0) 3.4 (9) 2.1 (7.3) 5.8 (20.4) 3.5 (5) 2.3 (8.3) 1.4 (4.9) WSL-9S 4 (36.7) 6.6 (23.3) 4.4 (5) 2.7 (9.4) 7.5 (26.4) 4.6 (.2) 3.0 (7) 1.8 (6.4) WSL-4511S 2 (53.4) 9.6 (33.9) 6.4 (22.5) 3.9 (13.7) 9 (38.4) 6.7 (23.5) 4.4 (5) 2.6 (9.3) WSL-13S 19.0 (66.8) 1 (42.4) 8.0 (28.1) 4.9 (17.2) 13.7 (48.0) 8.3 (29.4) 5.5 (19.4) 3.3 (6)
9 Suction Line Filter Driers Virginia KMP WSL Other Suction Line Products WSD Suction Line Filter Drier - For suction line applications in which it is difficult or impossible to use a standard length filter drier, the WSD series is the answer. All WSD filter driers have a 4" diameter and none exceeds a lay-in length over 5- inches. WSF Suction Line Filter - For those suction line applications in which filtration of particulates is the only concern, the WSF series is the solution. This filter is designed to offer a lower pressure drop than a comparable filter drier, while still filtering out the dangerous particles that can damage a system. WLD Premium Liquid Line Filter Drier - For liquid line applications requiring exceptional moisture removal capability, as well as the ability to remove acids from the refrigerant. This premium filter drier contains a special blend of desiccants as well as an extended filtering surface for removing larger-than-normal amounts of particulate matter from the refrigerant/lubricant combination. Compatible with all CFC, HCFC and HFC refrigerant/lubricant combinations. WAH Standard Liquid Line Filter Drier - For liquid line applications that require good filtration and moisture adsorption from a filter drier that is compatible with all CFC, HCFC and HFC refrigerant/lubricant combinations. Ideal for use in new and replacement equipment which has not had a compressor burnout. WSC Solid Core Liquid Line Filter Drier - For those technicians who like the quality of Virginia KMP filter driers, but who prefer a solid core. Adsorbs moisture and acids from the refrigerant as well as removing small suspended particles. Compatible with all CFC, HCFC, and HFC refrigerant/lubricant combinations. V2A Two Way Liquid Line Filter Drier - For use in the bidirectional liquid line of heat pump applications. Contains a special blend of desiccants to remove both moisture and acid from a system, as well as filtering very small particles from the refrigerant/lubricant mixture. Offers exceptional flow and drying capabilities. WSG Liquid Line Filter Drier with Built-In Sight Glass - For liquid line applications which require the use of a standard liquid line filter drier and a sight glass. The built in sight glass saves time and money in installation and reduces the possibility for leaks while the liquid line filter drier removes moisture and contaminants from the refrigerant/lubricant combination. Compatible with all CFC, HCFC and HFC refrigerant/lubricant combinations. NON-WARRANTY - All data, statements and recommendations contained herein are based upon the best information available and are believed to be reliable. However, no warranty, either expressed or implied, is made concerning the application of this product since the customer s use cannot be controlled. Statements concerning the use of this product should not be construed as suggestions, recommendations or inducements that it be used in violation of patent rights or in violation of any applicable laws or regulations. Product improvement is a continuous process at Virginia KMP Corp., therefore, product specifications may change without notice. Please contact your VKMP representative or distributor to verify details. Hong Kong Tel: Fax: France Tel: Fax: Germany Tel: Fax: Italy Tel: Fax: Virginia KMP Corp. 00 Platinum Way Dallas, Texas 237 USA Tel: Fax: info@virginiakmp.com Website: England Tel: Fax: Copyright 2001 Virginia KMP Corp. WSL - Version 5-8/6/01
Accumulators Virginia KMP Suction Line Accumulators
Accumulators Virginia KMP Suction Line Accumulators The Virginia KMP suction line accumulator's purpose is to prevent excessive quantities of liquid refrigerant and oil from returning to the compressor.
Eliminator Liquid line filter driers, Type DCL and DML
MAKING MODERN LIVING POSSIBLE Eliminator Liquid line filter driers, Type DCL and DML Flare connection Solder connection (copper) REFRIGERATION & AIR CONDITIONING DIVISION Technical leaflet Contents Page
Uni-Flow Filter Drier
STNDRD Uni-Flow Filter Drier The filter driers of series DTG are used in refrigeration system with unidirectional flow to absorb moisture and acid in the system and to filter out the impurities. FETURES
Product Data. CNPVP, CNRVP, CNPVT, CNRVT, CNPVU, CNRVU Evaporator Coil N Coil Cased and Uncased Upflow, Downflow
CNPVP, CNRVP, CNPVT, CNRVT, CNPVU, CNRVU Evaporator Coil N Coil Cased and Uncased Upflow, Downflow Product Data CN(P,R)VP CN(P,R)VT (Transition) A06008 A06007 This vertical design N -coil is a furnace
High pressure sight glass (PS = 52 bar) Types SGP N, SGP I and SGP X
MAKING MOERN IVING POSSIBE ata sheet igh pressure sight glass (PS = 2 bar) Types SGP N, SGP I and SGP X Sight glasses are used to indicate:. The condition of the refrigerant in the liquid line of the plant.
Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with
ASPT Series. Multi-Position, Internal TXV. Air Handler 1½ to 5 Tons
Series Multi-Position, Internal TXV Product Features Internal factory-installed thermal expansion valves for cooling and heat pump applications Direct drive, multi-speed ECM blower motor All-aluminum evaporator
Multi-element process analyzer
Multi-element process analyzer Elemental analysis by X-ray fluorescence Compact multi-element process analyzer for liquid streams or f ixed position web applications Featuring advanced third generation
Turbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
Air Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
Applications SS 11 VL- R
AC Line Filters SS Coils, SSVL High Frequency Type Overview The KEMET SS Coils, SSVL Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common
STATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
AIR COOLED CONDENSING UNIT
NEW EVOLUTION SERIES AIR COOLED CONDENSING UNIT OUTDOOR AIR COOLED CONDENSING UNIT ORIGINAL MANUFACTURED EQUIPMENT NEW EVOLUTION 7 & 8 SERIES BA-506-5 AUS Evolution Air Cooled Condensing Unit Series Content
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications The Vaisala DRYCAP Hand-Held Dewpoint Meter DM70 offers accurate and fast measurement for industrial dewpoint applications, such as compressed
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8426 Second edition 2008-02-01 Hydraulic fluid power Positive displacement pumps and motors Determination of derived capacity Transmissions hydrauliques Pompes et moteurs volumétriques
Applications SU 9 V- R
AC Line Filters SU Coils, SU 9V/9H Type Overview The KEMET SU Coils, SU 9V/9H Type AC line filters are offered in a wide variety of sizes and specifications. Applications Consumer Electronics Common mode
Pure Chromatography Consumables Pure flexibility. Pure specialization. Pure convenience.
Pure Chromatography Consumables Pure flexibility. Pure specialization. Pure convenience. Pure Consumables More focus on your application The Pure consumable portfolio offers an unrivaled range of products
Solenoid valves Type EVUL
Data sheet Solenoid valves EVUL EVUL solenoid valves are designed to fit into compact refrigeration systems. Available in servo operated versions they can be applied in liquid, suction, and hot gas lines.
IS2805 DESCRIPTION FEATURES
DESCRIPTION The is an optically coupled isolator consists of two infrared emitting diodes in reverse parallel connection and optically coupled to an NPN silicon photo transistor. This device belongs to
AME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)
Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be
A compilation of key maintenance and performance articles taken from the former Lycoming Flyer Newsletter. Lycoming Flyer Key Reprints
A compilation of key maintenance and performance articles taken from the former Lycoming Flyer Newsletter Lycoming Flyer Key Reprints D e a r Lycoming Flyer C u s t o m e r, O u r K e y R e p r i n t
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT CATALOGUE
AIR CONDITIONING COMMERCIAL REFRIGERATION HEAT PUMP STANDARD PRODUCT CATALOGUE CA-STD- SUMMARY SANHUA Strive for perfection, Pursuit of excellence 4 WAY REVERSING VALVE SHF SERIES 4 WAY REVERSING VALVE
Compact Orifice FlowMeter
Steam Data Reference Tables IM/OM/SDT Issue 1 Compact Orifice FlowMeter ABB The Company We are an established world force in the design and manufacture of instrumentation for industrial process control,
Thermodynamic Properties of Low-GWP Refrigerant for Centrifugal Chiller
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2016 Thermodynamic Properties of Low-GWP Refrigerant for Centrifugal Chiller
Solenoid valve Types CSV 2 - CSV 22 (NC) and solenoid coil
Data sheet Solenoid valve s CSV 2 - CSV 22 (NC) and solenoid coil CSV is a direct or servo-operated solenoid valve for liquid, suction, and hot gas lines with fluorinated refrigerants. CSV valves are for
Temperature Compensation for MEAS Pressure Sensors
INTRODUCTION Advancements in microelectronic technology have pushed silicon sensors not only toward greater sophistication and lower functional cost but also in the direction of higher performance. The
The Fundamentals of Moisture Calibration
The Fundamentals of Moisture The following guide will provide you with a basic knowledge of humidity calibration, help you to understand your requirements and select an appropriate solution. 1 Why Humidity
IS181 DESCRIPTION FEATURES
DESCRIPTION The IS181 series of optocoupler consists of an infrared light emitting diode optically coupled to an NPN silicon photo transistor in a space efficient Mini Flat Package. FEATURES Low Profile
TECHNICAL INFORMATION
TECHNICAL INFORMATION THERMAL MANAGEMENT OF SURFACE MOUNTED TANTALUM CAPACITORS Ian Salisbury AVX-Kyocera Group Company Paignton, England TQ4 7ER Abstract: This paper covers thermal management of surface
Product Data. CNPHP, CNRHP Evaporator Coil N Coil --- Cased Horizontal CNPHP / CNRHP
CNPHP, CNRHP Evaporator Coil N Coil --- Cased Horizontal Product Data 06005 This horizontal design N -coil is an evaporator coil designed to provide the highest standards of reliability and durability.
FIELD TEST OF WATER-STEAM SEPARATORS FOR THE DSG PROCESS
FIELD TEST OF WATER-STEAM SEPARATORS FOR THE DSG PROCESS Markus Eck 1, Holger Schmidt 2, Martin Eickhoff 3, Tobias Hirsch 1 1 German Aerospace Center (DLR), Institute of Technical Thermodynamics, Pfaffenwaldring
HELOXY Epoxy Functional Modifiers
Product Selector HELXY Epoxy Functional Modifiers Momentive's epoxy functional product line of HELXY Modifiers offers formulators the ability to choose between monofunctional and polyfunctional glycidyl
Complex Compounds Background of Complex Compound Technology
Complex Compounds For more than 20 years, Rocky Research has been a pioneer in the field of sorption refrigeration utilizing complex compounds. Our technology earned special recognition from NASA in 1999.
MAKING MODERN LIVING POSSIBLE. Thermostatic expansion valve Type TUB/TUBE and TUC/TUCE REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Thermostatic expansion valve Type B/BE and C/CE REFRIGERATION AND AIR CONDITIONING Technical leaflet Thermostatic expansion valve, type B/BE and C/CE Contents Page Introduction........................................................................................
Nelson Environmental Technologies, Inc. ( Chlorine and Chlorine Monitoring 2011 November 8
This Power Point presentation explains: 1. the forms of chlorine found in municipal water supplies; 2. how to monitor them; 3. and, methods of treating them in hemodialysis water treatment systems. 1 Water
E 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
INTERNATIONAL STANDARD. Oilseeds - Determination of moisture and volatile matter content
INTERNATIONAL STANDARD IS0 665 Second edition 2000-09-1 5 Corrected version 2002-04-01 Oilseeds - Determination of moisture and volatile matter content Graines oléagineuses - Détermination de ia teneur
Power Resistors, for Mounting onto a Heatsink Thick Film Technology
RCH Manufactured in cermet thick fi lm technology, these power resistors exhibit remarkable characteristics and the series includes 4 types ranging from 5 W to 50 W Designed to be mounted onto a heatsink,
Morwet naphthalene sulfonates
Agro Applications Morwet naphthalene sulfonates Inside Chapter 4.1 Solid formulations 1 Wetting agents 2 Dispersing agents 3 Liquid formulations 4 Quick Contacts Technical data and MSDS s http://surfactants.akzonobel.com
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications
DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications The Vaisala DRYCAP Hand-Held Dewpoint Meter DM70 offers accurate and fast measurement for industrial dewpoint applications, such as compressed
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. LBA11 Dual Pole OptoMOS Relay Parameter Ratings Units Blocking Voltage 3 V
Operating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
TPC Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY
Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY Contents General Technical Information on Interference Suppression..... 2 Ordering Code......................................... 3 QX Series
Chapter No. 2 EXPERIMENTAL TECHNIQUES IN CHEMISTRY SHORT QUESTIONS WITH ANSWERS Q.1 Define analytical chemistry? The branch of chemistry which deals with the qualitative and quantitative analyses of sample
Bulk Metal Foil Technology Power and Current Sensing Resistors with TCR of 2 ppm/ C, Tolerance to ± 0.01 % and power up to 10 W
Bulk Metal Foil Technology Power and Current Sensing Resistors with TCR of 2 ppm/ C, Tolerance to ± 0.01 % and power up to 10 W Any value available within resistance range The basic features of Vishay
ENVIRONMENTALLY SOUND R 410A REFRIGERANT
ENVIRONMENTALLY SOUND REFRIGERANT N4H3 Performance Series Product Specifications EFFICIENT 13 SEER HEAT PUMP ENVIRONMENTALLY SOUND R 410A REFRIGERANT 1½ THRU 5 TONS SPLIT SYSTEM 208 / 230 Volt, 1 phase,
Oil Retention and Pressure Drop of R134a, R1234yf and R410A with POE 100 in Suction Lines
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2012 Oil Retention and Pressure Drop of R134a, R1234yf and R410A with POE 100
Research and Development on European Cleaning Solutions for Radioactive Applications. Clean air solutions
Research and Development on European Cleaning Solutions for Radioactive Applications Dipl. Ing. Axel Mahler, R&D Director Europe, Camfil AB, Sweden 19.03.2014 Your speaker: Axel Mahler, R&D Director Europe
DM70. Hand-held Dewpoint Meter. Truly Fast Response - Superior Long-term Stability
DM70 Hand-held Dewpoint Meter Truly Fast Response - Superior Long-term Stability DM70 - When Dry Air Is Important The Vaisala DM70 Hand-held Dewpoint Meter offers stable and fast measurement for industrial
AIR COOLED CONDENSING UNIT
EVOLUTION SERIES AIR COOLED CONDENSING UNIT OUTDOOR AIR COOLED CONDENSING UNIT ORIGINAL MANUFACTURED EQUIPMENT Evolution Series BA-503-3 AUS Evolution Air Cooled Condensing Unit Series Content Page Explanation
THE ENERGY 68,SAVING TDVI. exible Combine Modular 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 HP 60, 62, 64, 66 HP
I N V E RT E R ion Range exible Combine Modular TDV I TDV I TDV I INVERTER INVERTER INVERTER 14, 16, 18, 20, 22 HP TDV I 24, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44 HP INVERTER INVERTER INVERTER TDV I INVERTER
V N (8) V N (7) V N (6) GND (5)
4-Channel Low Capacitance Dual-Voltage ESD Protection Array Features Three Channels of Low Voltage ESD Protection One Channel of High Voltage ESD Protection Provides ESD Protection to IEC61000 4 2 Level
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. L7900 SERIES NEGATIVE VOLTAGE REGULATORS OUTPUT CURRENT UP TO 1.5A OUTPUT
WORK STATEMENT #1740 SPONSORING TC3.3 Contaminant Control in Refrigerant Systems CO-SPONSORING TC 3.2
WORK STATEMENT #1740 SPONSORING TC3.3 Contaminant Control in Refrigerant Systems CO-SPONSORING TC 3.2 Title: Hydrogen Fluoride Capacity of Desiccants Executive Summary: Some desiccants have capacity for
Vaisala DRYCAP Hand-Held Dewpoint Meter DM70. Fast Response - Low Maintenance
Vaisala DRYCAP Hand-Held Dewpoint Meter DM70 Fast Response - Low Maintenance DM70 Hand-Held Dewpoint Meter for Spot-Checking Applications The Vaisala DRYCAP Hand- Held Dewpoint Meter DM70 offers accurate
Overview. Benefits. Applications. Turns and Impedance Characteristics. Core Material and Effective Frequency Range
EMI Core ESD-FPL Series Solid Cores for Flat Cables Overview The KEMET ESD-FPL Series solid cores are designed for use on flat cable. A wide range of sizes and shapes are available. Benefits Solid construction
LEAPERS, INC. RED/GREEN DOTS
LEAPERS, INC. 1 RED/GREEN DOTS range estimating scopes UTG reticle intensified scopes TOTAL SOLUTION TO YOUR NEEDS -COMMITMENT TO BEST QUALITY, BEST VALUE AND BEST SERVICEwww.LEAPERS.com 32700 Capitol
Cooling Water Flow Regulator
Temperature controlled, indirectly and directly actuated diaphragm valves / seat valves Port size G 3/8 to G DN 0 to DN 0 ontinuous regulation High accuracy No auxiliary energy required Technical data
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
Polypropylene pleated graded-density fi lter cartridges featuring APT Construction for Extended Filter Lifetime
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Betafi ne Polypropylene pleated graded-density fi lter cartridges featuring APT Construction for Extended Filter Lifetime
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments
Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, for Medical Instruments FEATURES For non-life support medical applications High reliability Weibull grading options DC leakage at 0.005
DATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
Absolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
3M Pak 10 Plug, PK10 series PK10-XXXPX-X-DA. 3M Pak 10 Socket, PK10 series PK10-XXXSX-X-DA
Page of 8 M Pak 0 Plug, PK0 series PK0-XXXPX-X-DA M Pak 0 Socket, PK0 series PK0-XXXSX-X-DA Product Specification Revised 08-0- Page of 8 Table of Contents Title Page.............................................................................
STTH16R04CT. Ultrafast recovery diode. Main product characteristics. Features and benefits. Description. Order codes TO-220AB TO-220FPAB
Ultrafast recovery diode Main product characteristics I F(AV) 2 X 8 A A1 A2 K V RRM 4 V T j 175 C V F (typ) t rr (typ).9 V 25 ns A1 K A2 A1 A2 K Features and benefits TO-22AB T TO-22FPAB FP Very low switching
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
Thermostatic expansion valves TUB/TUBE and TUC/TUCE
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves B/BE and C/CE www.danfoss.com Thermostatic expansion valve, type B/BE and C/CE Contents Page Introduction........................................................................................
RS1A - RS1M Fast Rectifiers
RSA - RSM Fast Rectifiers Features Glass-Passivated Junction For Surface Mounted Applications uilt-in Strain Relief, Ideal for Automated Placement UL Certified: Certificate # E326243 SMA/DO-24AC COLOR
Innovation in. Motionless Mixers
Innovation in Motionless Mixers Ross Motionless Mixers PIONEERING TECHNOLOGY. INCOMPARABLE QUALITY. WORLDWIDE LEADERSHIP. Serving all the process industries in virtually every industrialized country around
FST Bit Bus Switch
FST32 4-Bit Bus Switch The ON Semiconductor FST32 is a quad, high performance switch. The device is CMOS TTL compatible when operating between 4 and. Volts. The device exhibits extremely low R ON and adds
Power Resistor for Mounting onto a Heatsink Thick Film Technology
Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 300 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series
FVBSS fixed volume bottle
N FVBSS fixed volume bottle Sampling System The SENSOR Fixed Volume Bottle Sampling System (FVBSS) provides a repeatable fixed volume of sample during each sampling process without stopping flow of the
Solkane 410 Thermodynamics
SOLVAY FLUOR SOLKANE - INFORMATION SERVICE Solkane 410 Thermodynamics SOLVAY FLUOR Technical Service - Refrigerants - Product Bulletin no.: T/09.04/04/E P.O. Box 0 Phone +49/511/857-653 3000 Hannover Fax
ISEmax CAM40/CAS40. Technical Information
Technical Information Online measurement of nutrient parameters Ion-selective electrode system for the continuous measurement of ammonium and nitrate Application The ion-selective electrode system works
Anhydrides and Acids. Intermediates
Anhydrides and Acids Intermediates 1 POLYNT INTERMEDIATES & SPECIALTIES Anhydrides and Acids Index Production Sites...3 Polynt Intermediates...4 Anhydrides...5 Acids...8 Company Addresses...10 2 EMEA Polynt
DO-15 DO-201AD STTH3R04Q STTH3R04
STTH3R4 Ultrafast recovery diode Features Negligible switching losses Low forward and reverse recovery times High junction temperature Description The STTH3R4 series uses ST's new 4 V planar Pt doping
Medical Oxygen Regulators
Medical Oxygen Regulators 55B Range regulators are designed for mobile use in demanding conditions. The main material of manufacture is brass. Proven durability means these regulators are sold with a 5
Series FEATURES AND BENEFITS INTRODUCTION. Figure 1 Power Derating Curve. Table 1 Tolerance and TCR vs. Resistance
The 303143 Series Ultra The High-Precision 303143 Series Fixed Resistor Z-Foil Z201 Ultra High-Precision Fixed Resistor Z-Foil Z201 Screen/Test Flow as modified from S-311-P813 Proposed by NASA FEATURES
XBC300 Gen2. Fully-automated debonder and Cleaner
XBC300 Gen2 Fully-automated debonder and Cleaner XBC300 Gen2 FULLY AUTOMATED DEBONDER AND CLEANER The SUSS XBC300 Gen2 debonder and cleaner platform is designed for process development as well as high
OEM Silicon Pressure Die
OEM Silicon Pressure Die SM9520 Series FEATURES High volume, cost effective Gauge configuration Constant current or constant voltage drive Millivolt output Available in 0.15, 0.60 & 1.50 PSIG full-scale
Nickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
Odor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
NEW. A class of its own. Centrifuge 5430 / 5430 R
NEW A class of its own Centrifuge 5430 / 5430 R And you thought microcentrifuges had limits... Introduction Combining two completely different sets of requirements into one centrifuge: the rotor options
FEATURES BODY DIA. MAX. Type M AWG 30: [0.254] Type C AWG 28: [0.320] Type T AWG 30: [0.254]
![FEATURES BODY DIA. MAX. Type M AWG 30: [0.254] Type C AWG 28: [0.320] Type T AWG 30: [0.254]](/thumbs/85/91580916.jpg "FEATURES BODY DIA. MAX. Type M AWG 30: [0.254] Type C AWG 28: [0.320] Type T AWG 30: [0.254]")
M, C, T NTC Thermistors, Coated FEATURES Small size - conformally coated. Wide resistance range. Available in 11 different R-T curves. DESCRIPTION Models M, C, and T are conformally coated, leaded thermistors
MEMBREX. Ready-to-use Syringe Filters < 1 up to 100 ml. Minimizes Loss of Sample. Minimale Holdup-Volume. Low Adsorption.
MEMBREX < Ready-to-use Syringe Filters < 1 up to 100 ml Minimizes Loss of Sample Minimale Holdup-Volume Low Adsorption Optimized Shape MEMBREX Syringe filters Offering syringe filters in various shapes
B6VMAX Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS
TECHNICAL SPECIFICATIONS B6VMAX Series Air Handler with TXV 13-19 SEER Residential System 18,000-60,000 Btuh (Heat Pump & Air Conditioner) R-410A Refrigerant The B6VMAX Series of air handlers, when combined
Shell Tellus S2 M 46 Omf
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with shell tellus s2 m 46
THREADED CLOSURES. For access to Filter Vessels, Strainers, Pig Launchers & Receivers. Tube Turns Products
THREADED CLOSURES For access to Filter Vessels, Strainers, Pig Launchers & Receivers Tube Turns Products HISTORY Tube Turns was founded in 927 in Louisville, Kentucky, USA. We were the f i r s t A m e
Atlas Copco Air motors. A full range of compact, high performance air motors
Atlas Copco Air motors A full range of compact, high performance air motors ATLAS COPCO AIR MOTORS AIR MOTOR FEATURES AND CHARACTERISTICS Air motors are compact and lightweight. An air motor weighs only
Product Data. CAPVU Evaporator Coil A Coil --- Uncased Upflow, Downflow CAPVU
CAPVU Evaporator Coil A Coil --- Uncased Upflow, Downflow Product Data CAPVU A06002 The CAPVU evaporator coils incorporate proven standards for reliable system operation and performance throughout the
U.S. Patents 6,290,217 6,244,579
CR CR Series Overview U.S. Patents 6,90,7 6,,579 For the best in vibration isolation capabilities, choose Enidine s. Smaller than traditional wire ropes, these unique isolators provide cost-effective,
Deionized Water. Latest technology, highest quality, environmentally friendly. Water Technologies
Deionized Water Latest technology, highest quality, environmentally friendly Water Technologies NaCl OH - Cl - OH - OH - Cl - Anion OH - OH - Resin OH - OH OH - - OH - OH - Na + Na + Cation Resin H + H
Model TS105-10L5.5mm Thermopile Sensor
Thermopile IR-Sensor For Contactless Temperature Measurement Single Element For Industrial Pyrometers Silicon Lens Accurate Reference Sensor DESCRIPTION Thermopiles are mainly used for contactless temperature
AMBERLITE HPR1300 H Ion Exchange Resin
Product Data Sheet AMBERLITE HPR1300 H Ion Exchange Resin Uniform Particle Size, Gel, Strong Acid Cation Exchange Resin for Condensate Polishing in the Power Industry and Industrial Demineralization Applications
RF Power Feed-Through Capacitors with Conductor Rod, Class 1 Ceramic
DB 06030, DB 06040, DB 06060 RF Power Feed-Through Capacitors with Conductor Rod, Class Ceramic FEATURES Small size Geometry minimizes inductance Wide range of capacitance values APPLICATIONS Filtering
Gravimetric coal dust firing and dry lignite firing in power plants
Gravimetric coal dust firing and dry lignite firing in power plants 1 POWER PLANTS: Gravimetric dosing and transport technology for coal dust firing and dry lignite firing Currently, a significant share
60 V, 0.3 A N-channel Trench MOSFET
Rev. 01 11 September 2009 Product data sheet 1. Product profile 1.1 General description ESD protected N-channel enhancement mode Field-Effect Transistor (FET) in a small SOT2 (TO-26AB) Surface-Mounted
ACRYSOL TT-935 Rheology Modifier
Technical Data Sheet ACRYSOL TT-935 Rheology Modifier Description ACRYSOL TT-935 Rheology Modifier offers a low cost/high performance alternative to cellulosic thickeners in interior flat to semigloss