OSLON SQUARE White (CCT 2400K 5000K)
|
|
|
- Jeffry Byron Sparks
- 5 years ago
- Views:
Transcription
1 OSLON SQUARE White (CCT 2400K 5000K) IES LM Lumen and Chromaticity Maintenance Test Report Successor of OSLON SSL (Test Doc W9) IES TM Long Term Projection of Lumen Maintenance Test Documentation No.: W2 25 September 2012
2 Table of Contents Document Information... 2 Testing Laboratory... 2 Document Data... 2 Confirmation... 2 Disclaimer... 2 Test Report Number of LED light sources tested Description of LED light sources Description of auxiliary equipment Operating cycle Ambient conditions including airflow, temperature, and relative humidity Case temperature (test point temperature) Drive current of the LED light source during lifetime test Initial luminous flux and forward voltage at photometric measurement current Lumen maintenance data for each individual LED light source Observation of LED light source failures including the failure conditions and time of failure LED light source monitoring interval Photometric measurement uncertainty Chromaticity shift reported over the measurement time... 4 Summary of Testing Conditions... 4 Isometric View Graphs and Temperature Measurement Point (TMP)... 5 Test Results Graphic charts Tables 7 Lumen Maintenance Projection (IES TM-21-11) Nr.: W2 (25 September 2012) Page 1 of 10
3
4 Test Report 1. Number of LED light sources tested 25 randomly selected samples from mass production. 2. Description of LED light sources Devices tested LCW CQAR.EC with CCT 3000 K This applies to the following devices LCW CQAR.EC with CCT 2400 K 5000 K LCW CQAR.CC with CCT 2400 K 5000 K LCW CQAR.PC with CCT 4000 K 5000 K LUW CQAR (EQW) with CCT 4000 K 6000 K LUW CQAR (Streetwhite) with CCT 5700 K 6500 K Successor to OSLON SSL White (CCT 2700K 5000K) Test Doc W9. 3. Description of auxiliary equipment Devices are soldered to metal-core PCB and mounted in a thermal chamber on hot-plates to maintain the desired solder-point temperature. Reliability test boards are removed from the thermal chamber to cool down to room temperature for electrical and optical characterization. Soldering equipment: Heller 1812 MKIII Stress equipment: Customized thermal chambers Electrical Characterization: Keithley 2425-C controlled by customized software Measurement Equipment: Ulbricht Sphere/Spectrometer: Instrument Systems CAS140CT 4. Operating cycle The devices are tested at constant solder-point temperature and constant direct current. 5. Ambient conditions including airflow, temperature, and relative humidity Boards with devices under test are operated on controlled thermal plates in an oven with controlled environmental conditions according to section 4.4 of LM Case temperature T S is controlled within -2 C; ambient temperature is controlled within -5 C of T S ; humidity is below 65 % r.h. and airflow is minimized (not forced). 6. Case temperature (test point temperature) The devices under test are operated at three constant case temperatures of 55 C, 85 C and 118 C. The test point temperature at device is mar ked in the isometric view graph on page Drive current of the LED light source during lifetime test The devices under test are operated at constant forward current. The operating current is listed in the test data tables. Nr.: W2 (25 September 2012) Page 3 of 10
5 8. Initial luminous flux and forward voltage at photometric measurement current Please refer to the test data charts and tables on pages Lumen maintenance data for each individual LED light source Please refer to the test data tables on pages Observation of LED light source failures including the failure conditions and time of failure. None. 11. LED light source monitoring interval. Devices were electrically and optically characterized at room temperature at 0 h, 500 h, 1000 h, 2000 h, 3000 h, 4000 h, 5000 h, 6000 h. 12. Photometric measurement uncertainty Measurement Uncertainty (GUM): 4.8 % 13. Chromaticity shift reported over the measurement time Please refer to the test data tables on pages 7-9. Summary of Testing Conditions I II III Case Temperature (Solder Point) T S = 55 C T S = 85 C T S = 118 C Device Drive Current I F = 500 ma I F = 500 ma I F = 500 ma Number of Samples Test Start 14. Dec Dec Dec Test Duration 6,000 h 6,000 h 6,000 h Nr. of Failures Nr.: W2 (25 September 2012) Page 4 of 10
6 Isometric View Graphs and Temperature Measurement Point (TMP) Device: LxW CQAR.xx TMP Nr.: W2 (25 September 2012) Page 5 of 10
7 Test Results 1. Graphic charts Device: (LCW CQAR.EC) Lumen Maintenance (I F = 500 ma) Normalized to 0 h Chromaticity Maintenance u v (I F = 500 ma) Normalized to 0 h Nr.: W2 (25 September 2012) Page 6 of 10
8 2. Tables Device: (LCW CQAR.EC) Test Condition I: T S = 55 C, I F = 500 ma Lumen Maintenance (I F = 500 ma) Normalized to 0 h U F [V] Φ V [lm] Measurement Time of Lumen Maintenance 0 h 0 h 0 h 549 h 1025 h 2000 h 3049 h 4000 h 5000 h 6000 h 1 3,00 145,40 100,00 98,38 98,70 99,54 97,56 97,14 95,95 95,95 2 3,00 145,30 100,00 98,45 98,77 99,53 97,84 97,42 96,02 96,02 3 3,00 142,90 100,00 98,22 98,53 99,29 97,66 97,23 96,10 96,10 4 3,00 143,90 100,00 98,16 98,54 99,38 97,61 97,18 96,06 96,06 5 3,00 142,60 100,00 98,28 98,60 99,36 97,73 97,23 96,03 96,03 6 3,00 142,30 100,00 98,28 98,60 99,36 97,65 97,22 95,95 95,95 7 3,00 144,10 100,00 98,23 98,55 99,38 97,61 97,26 95,92 95,92 8 3,00 143,10 100,00 98,36 98,75 99,58 97,94 97,45 96,25 96,25 9 3,00 146,50 100,00 98,39 98,78 99,55 97,92 97,50 96,38 96, ,00 147,00 100,00 98,46 98,85 99,62 98,06 97,51 96,33 96, ,00 145,70 100,00 98,38 98,77 99,47 97,84 97,42 96,03 96, ,01 145,60 100,00 98,45 98,77 99,47 97,84 97,35 96,16 96, ,01 146,20 100,00 98,32 98,57 99,41 97,85 97,29 96,31 96, ,01 143,40 100,00 98,36 98,68 99,51 97,88 97,45 96,32 96, ,00 143,80 100,00 98,36 98,68 99,52 97,81 97,32 96,26 96, ,01 141,80 100,00 98,49 98,88 99,71 98,00 97,57 96,36 96, ,00 142,00 100,00 98,42 98,74 99,64 97,93 97,43 96,22 96, ,00 141,40 100,00 98,41 98,73 99,49 97,92 97,35 96,21 96, ,00 141,70 100,00 98,35 98,59 99,42 97,85 97,28 96,22 96, ,00 143,30 100,00 98,43 98,82 99,65 97,95 97,59 96,53 96, ,00 142,80 100,00 98,29 98,60 99,43 97,80 97,30 96,17 96, ,00 141,60 100,00 98,27 98,80 99,49 97,85 97,42 96,21 96, ,00 141,70 100,00 98,35 98,73 99,49 97,78 97,28 95,93 95, ,00 142,20 100,00 98,28 98,60 99,43 97,79 97,29 96,09 96, ,00 140,30 100,00 98,40 98,79 99,62 97,98 96,97 95,97 95,97 median 3,00 143,10 100,00 98,36 98,73 99,49 97,84 97,32 96,17 96,17 average 3,00 143,46 100,00 98,35 98,70 99,49 97,83 97,34 96,16 96,16 std. dev. 0,00 1,83 0,00 0,08 0,10 0,10 0,13 0,14 0,16 0,16 min. 3,00 140,30 100,00 98,16 98,53 99,29 97,56 96,97 95,92 95,92 max. 3,01 147,00 100,00 98,49 98,88 99,71 98,06 97,59 96,53 96,53 Chromaticity Maintenance u v (I F = 500 ma) Normalized to 0 h CCT [K] u' v' Measurement Time of Color Shift u' v' 0 h 0 h 0 h 0 h 549 h 1025 h 2000 h 3049 h 4000 h 5000 h 6000 h ,253 0,518 0,0000 0,0001 0,0000 0,0002 0,0003 0,0003 0,0005 0, ,254 0,519 0,0000 0,0002 0,0002 0,0002 0,0002 0,0002 0,0006 0, ,253 0,518 0,0000 0,0001 0,0001 0,0002 0,0002 0,0003 0,0005 0, ,252 0,517 0,0000 0,0002 0,0002 0,0002 0,0002 0,0003 0,0005 0, ,253 0,518 0,0000 0,0002 0,0001 0,0001 0,0003 0,0003 0,0006 0, ,254 0,519 0,0000 0,0002 0,0001 0,0002 0,0002 0,0002 0,0005 0, ,250 0,518 0,0000 0,0002 0,0001 0,0001 0,0002 0,0002 0,0004 0, ,251 0,518 0,0000 0,0002 0,0002 0,0003 0,0003 0,0004 0,0005 0, ,251 0,518 0,0000 0,0001 0,0001 0,0002 0,0004 0,0003 0,0006 0, ,251 0,519 0,0000 0,0002 0,0001 0,0003 0,0004 0,0003 0,0006 0, ,252 0,519 0,0000 0,0002 0,0001 0,0001 0,0002 0,0002 0,0005 0, ,253 0,520 0,0000 0,0001 0,0001 0,0001 0,0002 0,0004 0,0005 0, ,250 0,516 0,0000 0,0002 0,0001 0,0001 0,0002 0,0002 0,0005 0, ,253 0,518 0,0000 0,0002 0,0001 0,0002 0,0003 0,0003 0,0006 0, ,250 0,516 0,0000 0,0002 0,0001 0,0001 0,0003 0,0003 0,0005 0, ,253 0,515 0,0000 0,0002 0,0002 0,0002 0,0003 0,0004 0,0006 0, ,253 0,519 0,0000 0,0002 0,0001 0,0001 0,0003 0,0003 0,0006 0, ,254 0,519 0,0000 0,0002 0,0001 0,0001 0,0002 0,0003 0,0004 0, ,254 0,518 0,0000 0,0001 0,0000 0,0002 0,0003 0,0003 0,0005 0, ,253 0,518 0,0000 0,0001 0,0000 0,0001 0,0002 0,0002 0,0004 0, ,253 0,519 0,0000 0,0002 0,0000 0,0001 0,0002 0,0002 0,0005 0, ,253 0,518 0,0000 0,0002 0,0001 0,0001 0,0003 0,0004 0,0006 0, ,253 0,519 0,0000 0,0002 0,0001 0,0001 0,0003 0,0002 0,0005 0, ,253 0,519 0,0000 0,0001 0,0001 0,0002 0,0003 0,0004 0,0006 0, ,254 0,518 0,0000 0,0002 0,0001 0,0001 0,0002 0,0003 0,0004 0,0006 median ,253 0,518 0,0000 0,0002 0,0001 0,0001 0,0003 0,0003 0,0005 0,0007 average ,252 0,518 0,0000 0,0002 0,0001 0,0002 0,0003 0,0003 0,0005 0,0007 std. dev. 35 0,001 0,001 0,0000 0,0000 0,0000 0,0001 0,0001 0,0001 0,0001 0,0001 min ,250 0,515 0,0000 0,0001 0,0000 0,0001 0,0002 0,0002 0,0004 0,0005 max ,254 0,520 0,0000 0,0002 0,0002 0,0003 0,0004 0,0004 0,0006 0,0008 Nr.: W2 (25 September 2012) Page 7 of 10
9 Device: (LCW CQAR.EC) Test Condition II: T S = 85 C, I F = 500 ma Lumen Maintenance (I F = 500 ma) Normalized to 0 h U F [V] Φ V [lm] Measurement Time of Lumen Maintenance 0 h 0 h 0 h 549 h 1025 h 2000 h 3049 h 4000 h 5000 h 6000 h 1 3,01 146,10 100,00 97,63 97,68 97,88 96,14 95,58 94,13 94,13 2 3,01 145,10 100,00 97,76 97,87 98,07 96,39 95,90 94,30 94,30 3 3,01 144,40 100,00 97,96 98,00 98,19 96,58 95,74 94,21 94,21 4 3,01 142,00 100,00 97,93 98,03 98,28 96,59 96,02 94,75 94,75 5 3,01 142,50 100,00 98,07 98,18 98,36 96,74 96,11 94,70 94,70 6 3,02 141,60 100,00 97,78 97,89 98,06 96,44 95,66 94,18 94,18 7 3,02 142,50 100,00 97,93 97,97 98,08 96,46 95,75 94,28 94,28 8 3,02 142,60 100,00 97,93 98,04 98,15 96,54 95,90 94,42 94,42 9 3,02 143,10 100,00 97,94 97,98 98,16 96,62 95,91 94,44 94, ,02 143,60 100,00 97,88 98,05 98,39 96,63 96,06 94,73 94, ,02 141,90 100,00 97,93 98,03 98,28 96,52 95,88 94,47 94, ,02 140,90 100,00 98,41 98,51 98,69 96,99 96,28 94,79 94, ,02 143,10 100,00 97,87 97,91 98,09 96,41 95,70 94,16 94, ,02 144,60 100,00 97,48 97,58 97,92 96,10 95,54 94,22 94, ,02 144,80 100,00 97,89 98,00 98,06 96,45 95,68 94,43 94, ,02 144,60 100,00 97,89 98,07 98,06 96,51 95,82 94,35 94, ,01 145,00 100,00 97,69 97,87 97,85 96,25 95,62 94,09 94, ,01 143,30 100,00 97,53 97,63 97,74 96,13 95,57 94,38 94, ,01 142,00 100,00 97,65 97,75 97,78 96,17 95,46 94,12 94, ,02 140,30 100,00 97,48 97,65 97,74 96,20 95,55 94,06 94, ,02 143,50 100,00 97,46 97,50 97,68 96,07 95,51 94,18 94, ,02 143,30 100,00 97,87 98,05 97,96 96,48 95,78 94,31 94, ,02 142,70 100,00 97,87 98,04 98,08 96,40 95,76 94,22 94, ,02 142,70 100,00 98,08 98,32 98,37 96,82 96,18 94,57 94, ,02 142,90 100,00 98,01 98,25 98,30 96,68 96,05 94,43 94,43 median 3,02 143,10 100,00 97,88 98,00 98,08 96,46 95,76 94,31 94,31 average 3,02 143,16 100,00 97,84 97,95 98,09 96,45 95,80 94,36 94,36 std. dev. 0,00 1,39 0,00 0,22 0,24 0,24 0,24 0,22 0,22 0,22 min. 3,01 140,30 100,00 97,46 97,50 97,68 96,07 95,46 94,06 94,06 max. 3,02 146,10 100,00 98,41 98,51 98,69 96,99 96,28 94,79 94,79 Chromaticity Maintenance u v (I F = 500 ma) Normalized to 0 h CCT [K] u' v' Measurement Time of Color Shift u' v' 0 h 0 h 0 h 0 h 549 h 1025 h 2000 h 3049 h 4000 h 5000 h 6000 h ,253 0,519 0,0000 0,0004 0,0007 0,0009 0,0010 0,0011 0,0011 0, ,253 0,518 0,0000 0,0005 0,0008 0,0010 0,0010 0,0011 0,0011 0, ,254 0,520 0,0000 0,0005 0,0007 0,0010 0,0011 0,0012 0,0012 0, ,255 0,519 0,0000 0,0004 0,0007 0,0010 0,0010 0,0011 0,0013 0, ,253 0,520 0,0000 0,0005 0,0008 0,0010 0,0011 0,0012 0,0013 0, ,254 0,519 0,0000 0,0004 0,0007 0,0008 0,0009 0,0010 0,0011 0, ,252 0,519 0,0000 0,0004 0,0007 0,0010 0,0010 0,0011 0,0011 0, ,252 0,519 0,0000 0,0005 0,0007 0,0010 0,0011 0,0011 0,0011 0, ,251 0,517 0,0000 0,0005 0,0008 0,0010 0,0011 0,0012 0,0012 0, ,252 0,517 0,0000 0,0004 0,0006 0,0009 0,0010 0,0011 0,0011 0, ,255 0,518 0,0000 0,0003 0,0006 0,0009 0,0009 0,0010 0,0011 0, ,253 0,516 0,0000 0,0005 0,0008 0,0011 0,0012 0,0013 0,0013 0, ,253 0,520 0,0000 0,0005 0,0007 0,0010 0,0011 0,0011 0,0012 0, ,253 0,519 0,0000 0,0004 0,0006 0,0009 0,0010 0,0011 0,0012 0, ,253 0,517 0,0000 0,0004 0,0007 0,0009 0,0010 0,0010 0,0011 0, ,253 0,518 0,0000 0,0004 0,0007 0,0010 0,0010 0,0011 0,0012 0, ,253 0,518 0,0000 0,0004 0,0006 0,0009 0,0009 0,0010 0,0011 0, ,253 0,519 0,0000 0,0004 0,0006 0,0009 0,0009 0,0010 0,0012 0, ,253 0,518 0,0000 0,0004 0,0006 0,0009 0,0010 0,0011 0,0011 0, ,253 0,515 0,0000 0,0004 0,0007 0,0010 0,0010 0,0012 0,0013 0, ,252 0,518 0,0000 0,0004 0,0007 0,0010 0,0010 0,0011 0,0012 0, ,252 0,518 0,0000 0,0004 0,0007 0,0009 0,0010 0,0010 0,0011 0, ,253 0,519 0,0000 0,0005 0,0007 0,0010 0,0010 0,0012 0,0012 0, ,252 0,516 0,0000 0,0004 0,0006 0,0010 0,0010 0,0011 0,0011 0, ,252 0,518 0,0000 0,0005 0,0006 0,0009 0,0010 0,0011 0,0011 0,0012 median ,253 0,518 0,0000 0,0004 0,0007 0,0010 0,0010 0,0011 0,0011 0,0012 average ,253 0,518 0,0000 0,0005 0,0007 0,0010 0,0010 0,0011 0,0012 0,0012 std. dev. 24 0,001 0,001 0,0000 0,0001 0,0001 0,0001 0,0001 0,0001 0,0001 0,0001 min ,251 0,515 0,0000 0,0003 0,0006 0,0008 0,0009 0,0010 0,0011 0,0011 max ,255 0,520 0,0000 0,0005 0,0008 0,0011 0,0012 0,0013 0,0013 0,0015 Nr.: W2 (25 September 2012) Page 8 of 10
10 Device: (LCW CQAR.EC) Test Condition III: T S = 118 C, I F = 500 ma Lumen Maintenance (I F = 500 ma) Normalized to 0 h U F [V] Φ V [lm] Measurement Time of Lumen Maintenance 0 h 0 h 0 h 549 h 1025 h 2000 h 3049 h 4000 h 5000 h 6000 h 1 3,03 146,10 100,00 96,75 96,44 96,22 93,81 92,85 91,01 91,01 2 3,03 146,90 100,00 96,90 96,46 96,04 93,64 92,61 90,98 90,98 3 3,03 146,10 100,00 97,02 96,58 96,15 93,74 92,64 90,94 90,94 4 3,02 145,50 100,00 96,46 96,50 96,27 93,93 92,89 91,04 91,04 5 3,02 144,30 100,00 97,06 96,82 96,72 94,50 93,31 91,59 91,59 6 3,02 142,90 100,00 97,10 96,78 96,53 94,17 93,11 91,38 91,38 7 3,02 142,50 100,00 97,02 96,64 96,30 93,87 92,88 91,08 91,08 8 3,03 142,10 100,00 97,16 96,84 96,64 94,20 93,21 91,40 91,40 9 3,03 143,10 100,00 96,90 96,58 96,25 93,89 92,91 90,97 90, ,03 142,90 100,00 96,96 96,57 96,39 94,03 93,04 91,03 91, ,02 143,60 100,00 97,11 96,80 96,62 94,33 93,07 91,35 91, ,02 144,10 100,00 96,92 96,53 96,29 93,87 92,75 90,96 90, ,02 146,90 100,00 96,90 96,60 96,45 93,85 93,02 91,25 91, ,02 147,20 100,00 97,11 96,67 96,39 93,93 92,83 91,00 91, ,00 145,40 100,00 97,14 96,91 96,96 94,61 93,78 92,13 92, ,01 143,30 100,00 97,11 96,65 96,54 94,11 93,13 91,47 91, ,01 142,10 100,00 96,95 96,63 96,50 94,06 93,14 91,26 91, ,01 142,70 100,00 96,96 96,64 96,45 94,02 93,03 91,09 91, ,01 143,50 100,00 96,97 96,66 96,55 94,19 93,21 91,20 91, ,01 144,70 100,00 97,00 96,69 96,73 94,38 93,54 91,89 91, ,01 144,30 100,00 96,99 96,61 96,57 94,15 93,25 91,52 91, ,01 142,90 100,00 97,73 97,34 97,24 94,80 93,88 92,07 92, ,00 143,40 100,00 96,97 96,66 96,47 94,12 93,20 91,34 91, ,00 143,50 100,00 97,18 96,87 96,69 94,33 93,28 91,27 91, ,00 143,90 100,00 96,98 96,60 96,56 94,14 93,09 91,02 91,02 median 3,02 143,60 100,00 96,99 96,64 96,50 94,11 93,09 91,25 91,25 average 3,02 144,16 100,00 97,01 96,68 96,50 94,11 93,11 91,29 91,29 std. dev. 0,01 1,54 0,00 0,21 0,18 0,26 0,28 0,31 0,34 0,34 min. 3,00 142,10 100,00 96,46 96,44 96,04 93,64 92,61 90,94 90,94 max. 3,03 147,20 100,00 97,73 97,34 97,24 94,80 93,88 92,13 92,13 Chromaticity Maintenance u v (I F = 500 ma) Normalized to 0 h CCT [K] u' v' Measurement Time of Color Shift u' v' 0 h 0 h 0 h 0 h 549 h 1025 h 2000 h 3049 h 4000 h 5000 h 6000 h ,252 0,516 0,0000 0,0011 0,0013 0,0016 0,0019 0,0020 0,0025 0, ,252 0,516 0,0000 0,0010 0,0013 0,0016 0,0018 0,0021 0,0024 0, ,253 0,517 0,0000 0,0011 0,0014 0,0017 0,0019 0,0020 0,0025 0, ,254 0,518 0,0000 0,0010 0,0014 0,0017 0,0019 0,0021 0,0025 0, ,252 0,519 0,0000 0,0010 0,0013 0,0017 0,0019 0,0020 0,0025 0, ,254 0,519 0,0000 0,0011 0,0015 0,0018 0,0020 0,0021 0,0026 0, ,254 0,519 0,0000 0,0010 0,0014 0,0017 0,0019 0,0022 0,0025 0, ,252 0,520 0,0000 0,0010 0,0013 0,0017 0,0019 0,0020 0,0025 0, ,252 0,519 0,0000 0,0011 0,0014 0,0017 0,0018 0,0021 0,0025 0, ,252 0,516 0,0000 0,0010 0,0013 0,0016 0,0018 0,0020 0,0025 0, ,253 0,519 0,0000 0,0010 0,0013 0,0017 0,0018 0,0020 0,0024 0, ,252 0,520 0,0000 0,0011 0,0014 0,0017 0,0018 0,0021 0,0025 0, ,251 0,519 0,0000 0,0009 0,0013 0,0016 0,0018 0,0019 0,0023 0, ,252 0,519 0,0000 0,0010 0,0014 0,0017 0,0018 0,0019 0,0023 0, ,250 0,519 0,0000 0,0010 0,0014 0,0017 0,0019 0,0021 0,0024 0, ,252 0,517 0,0000 0,0010 0,0014 0,0017 0,0018 0,0020 0,0023 0, ,253 0,516 0,0000 0,0011 0,0015 0,0018 0,0019 0,0021 0,0025 0, ,252 0,519 0,0000 0,0010 0,0014 0,0017 0,0018 0,0020 0,0023 0, ,251 0,519 0,0000 0,0010 0,0014 0,0017 0,0018 0,0020 0,0024 0, ,251 0,517 0,0000 0,0011 0,0014 0,0018 0,0019 0,0022 0,0025 0, ,252 0,519 0,0000 0,0011 0,0014 0,0018 0,0019 0,0021 0,0024 0, ,251 0,520 0,0000 0,0012 0,0015 0,0018 0,0019 0,0021 0,0024 0, ,252 0,520 0,0000 0,0010 0,0014 0,0017 0,0018 0,0021 0,0024 0, ,251 0,519 0,0000 0,0011 0,0013 0,0016 0,0018 0,0021 0,0025 0, ,251 0,520 0,0000 0,0011 0,0014 0,0017 0,0017 0,0020 0,0023 0,0027 median ,252 0,519 0,0000 0,0010 0,0014 0,0017 0,0018 0,0021 0,0025 0,0028 average ,252 0,518 0,0000 0,0011 0,0014 0,0017 0,0019 0,0020 0,0024 0,0028 std. dev. 22 0,001 0,001 0,0000 0,0001 0,0001 0,0001 0,0001 0,0001 0,0001 0,0001 min ,250 0,516 0,0000 0,0009 0,0013 0,0016 0,0017 0,0019 0,0023 0,0027 max ,254 0,520 0,0000 0,0012 0,0015 0,0018 0,0020 0,0022 0,0026 0, End of the accreditated section of the report Nr.: W2 (25 September 2012) Page 9 of 10
11 Lumen Maintenance Projection (IES TM-21-11) For Information Only! Description of LED light source tested LED drive current used in the test Test duration Test duration used for projection (LCW CQAR.EC) 500mA 6,000 hours 1,000 hours to 6,000 hours I II III Case Temperature (solder-point) T S = 55 C T S = 85 C T S = 118 C Sample size α 5.923E-06 7,841E-06 1,209E-05 B 9.983E-01 9,905E E-01 Projected L70 59,932 44,103 27,927 Reported L70 > 36,000 > 36,000 27,927 Nr.: W2 (25 September 2012) Page 10 of 10
12 END OF DOCUMENT
For. LED Package. : Sep. 17, Date of Test. LED Light Source. Review by: Engineer:
IES LM-80-08 Test Report For Hangzhou Hangke Optoelectronics Joint Stock Co., LTD Hangke Industrial Park, 33 Xianxing Road, Xianlin Industrial Zone, Hangzhou LED Package Model: TOP LED 2835 Laboratory:
LED Lumen Maintenance and Life Test System (LEDLM-80PL) Brochure. Global Office of Lisun Electronics Inc.
LED Lumen Maintenance and Life Test System (LEDLM-80PL) Brochure Global Office of Lisun Electronics Inc. Lisun Group (Hong Kong) Limited Add: Room C, 15/F Hua Chiao Commercial Center, 678 Nathan Road,
Data Sheet. ADJD-xMxx. High Power Light Strip, Ring & Round. Description. Features. Applications. Specifications
ADJD-xMxx High Power Light Strip, Ring & Round Data Sheet Description Avago s Light Strip, Ring & Round Power LEDs range of products offers a series of LEDs which provides better lifetime robustness and
Test Report. Report No.: EED35I Page 1 of 12. Customer : Revolution Lighting Technologies : 4139 Guardian Street, Simi Valley, CA93063
Report No.: EED35I000235-1 Page 1 of 12 Customer : Revolution Lighting Technologies Address : 4139 Guardian Street, Simi Valley, CA93063 Description of the submitted sample(s): Sample Name : LED TUBE Model/Type
Cree XLamp XP-G LEDs Data Sheet
Cree XLamp XP-G LEDs Data Sheet The XLamp XP-G LED delivers unprecedented levels of light output and efficacy for a single die LED. The XLamp XP-G LED continues Cree s history of innovation in LEDs for
EHP-AX08EL/GT01H-P03/5063/Y/N13
Data Sheet Features Feature of the device: Small package with high efficiency Typical color temperature: 5650 K. Typical viewing angle: 140 Typical light flux output: 160 lm @700mA. ESD protection. Soldering
CBM-360 LEDs. CBM-360 Product Datasheet. Features: Table of Contents. Applications
CBM-360 LEDs Features: Extremely high optical output: Over 5,000 lumens from a single package (white) Table of Contents Technology Overview...2 Test Specifications...2 White Binning Structure...3 Chromaticity
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Features Feature of the device: small package with high efficiency Typical color temperature: 3500 K. Typical view angle: 120. Typical light flux output: 33 lm @ 350mA ESD protection. Soldering methods:
Product Description. Table of contents. Relative Flux vs. Junction Temperature CLD-DS46 Rev 0. Product family data sheet
Product family data sheet CLD-DS46 Rev 0 Cree XLamp ML-C LEDs Product Description The Cree XLamp ML-C LED brings lighting-class reliability and performance to 1/3-watt LEDs. The XLamp ML-C expands Cree
EAHP1215WA2. Features. Description. Applications
Features LM-80 Certified High Power COB & High CRI LED Multi-Chip Solution Dimension:12 mm x 15 mm x 1.6 mm Main Parameters: Luminous Flux, Forward Voltage, Chromaticity and Color Rendering Index RoHS
Data Sheet. ASMT-QWBG, ASMT-QWBH 0.5 W Cool White Power PLCC4 Surface Mount LED. Description. Features. Applications
ASMT-QWBG, ASMT-QWBH 0.5 W Cool White Power PLCC4 Surface Mount LED Data Sheet Description The Avago Technologies ASMT-QWBx series 0.5W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
Cree XLamp XR-C LED Data Sheet
Cree XLamp XR-C LED Data Sheet The XLamp XR-C LED gives lighting designers the flexibility and performance to create the next generation of LED lighting products. XLamp XR-C LEDs feature electrically neutral
Shwo. 3W Series. Product Specification. Introduction
Product Specification Shwo 3W Series 爍 Shwo [Shuo] is the English translation for the Chinese word meaning Twinkle and is often used as a description of stars or other bright, celestial objects as seen
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-QYBG / ASMT-QYBH / ASMT-QYBJ 0.5W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
March 26, Title: TEMPO 21 Report. Prepared for: Sviazinvest, OJSC. Prepared by: Cree Durham Technology Center (DTC) Ticket Number: T
March 26, 2012 Title: TEMPO 21 Report Prepared for: Sviazinvest, OJSC Prepared by: Cree Durham Technology Center (DTC) Ticket Number: 10806-T Co NVLAP lab code 500070-0 The accreditation of the Cree Durham
Specification LW514. Drawn Approval Approval. Rev. 02 December 서식번호 : SSC-QP (Rev.00)
Specification LW514 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
Specification LY530. Drawn Approval Approval. Rev. 08 December 서식번호 : SSC-QP (Rev.00)
Specification LY530 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
EHP-AX08EL/UB01H-P01/B7B8/F3
Data Sheet Features Feature of the device: Small package with high efficiency Typical wavelength: 465nm Typical view angle: 150 Typical light flux output: 17 lm @ 350mA. ESD protection. Soldering methods:
LUSTROUS GREEN TECHNOLOGY OF LIGHTINGS
Technical Datasheet LS08 (All patents pending) High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, is an energy-efficient building block generating enough light
Cree XLamp XR-E LED PRODUCT FAMILY DATA SHEET FEATURES PRODUCT DESCRIPTION TABLE OF CONTENTS CLD DS-05 REV11
Cree XLamp XR-E LED PRODUCT FAMILY DATA SHEET CLD DS-5 REV11 PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS WWW. CREE.COM/XLAMP The XLamp XR-E LED is leading the LED lighting revolution with its unprecedented
Cree XLamp CXA2 Studio LED
Cree XLamp CXA2 Studio LED Product family data sheet CLD-DS100 Rev 2A Product Description The XLamp CXA2 Studio LED is optimized for motion picture, studio and photography applications, delivering high
LedEngin, Inc. High Luminous Efficacy White Power LedFlex Emitter LZ4-00CW15. Key Features. Typical Applications. Description
High Luminous Efficacy White Power LedFlex Emitter LZ4-00CW15 Key Features High Luminous Efficacy 15W White LED Unique package design with ceramic substrate, integrated glass lens and Flex PCB New industry
Cree XLamp XP-E LEDs Data Sheet
Cree XLamp XP-E LEDs Data Sheet The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 8% smaller footprint. The XLamp XP-E LED continues
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet
ASMT-UYBG / ASMT-UYBH / ASMT-UYBJ 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
LUSTROUS PEARL VI3. High Power Solid-State LED Light Source. Introduction
Technical Datasheet LS44 High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Pearl VI3 is an energy-efficient building block generating enough light outputs suitable
Features. Typical Applications G9 Candle Light. ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: DS-0384
ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: 1.1 Features High Color rendering index High flux per LED Good color uniformity Industry best moisture sensitivity level - JEDEC Level 1
Specification LW514. [Preliminary] CUSTOMER SSC. Rev. 00 October Document No. : SSC-QP (Rev.00)
![Specification LW514. [Preliminary] CUSTOMER SSC. Rev. 00 October Document No. : SSC-QP (Rev.00)](/thumbs/96/127748974.jpg "Specification LW514. [Preliminary] CUSTOMER SSC. Rev. 00 October Document No. : SSC-QP (Rev.00)")
Specification LW514 [Preliminary] Drawn SSC Approval CUSTOMER Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline
LUSTRON V3 LUSTROUS GREEN TECHNOLOGY OF LIGHTINGS LUSTRON V3. High Power Solid-State LED Light Source
Technical Datasheet LS45 High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Lustrous Technology is proud to release the new. Ideal for your high concentration
Specification HW321A. Drawn Approval Approval. Rev November 서식번호 : SSC-QP (Rev.00)
Specification HW321A SSC Customer Drawn Approval Approval [ Contents ] 1.Full code of HIGH FLUX LED series 2.Feature & Application 3. Absolute Maximum Ratings 4.Electro Characteristics 5.Outline Dimension
5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Descriptions. Features. Package Dimensions
5.0mm x 5.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5051XQR412ZXS-C1 Cool White ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Suitable for all SMT assembly
Specification LY521. <080924> Rev. 0.3 Document No. : SSC-QP (Rev.00) Drawn Approval Approval. Rev. 00 December
Specification LY521 SSC Customer Drawn Approval Approval 1. Features Contents 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color &
Product family data sheet
Cree XLamp XR-C LEDs Product family data sheet CLD-DS1 Rev 12 Product Description FEATURES Table of contents www.cree.com/xlamp The XLamp XR-C LED gives lighting designers the flexibility and performance
5W HI-POWER LED SPECIFICATION
5W HI-POWER LED SPECIFICATION HPB8b-49K5xWHBx Drawn by Checked by Approved by RoHS Conformity DATE:2011/2/11 REV:A HUEY JANN High Power 5W LED is made of GaInN chips with precise package technique which
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet High Power LED 0.5W (Preliminary) Features Feature of the device: small package with high efficiency Typical view angle: 120 Typical color temperature: 3500 K. ESD protection. Soldering
Cree XLamp ML-E LEDs Data Sheet
Cree XLamp ML-E LEDs Data Sheet The Cree XLamp ML-E LED brings lighting class reliability and performance to 1/2 Watt LEDs. The XLamp ML-E expands Cree s lighting class leadership to linear and distributed
PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 3000K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 1.0.
CUSTOMER :. DATE : 213. 3. 29. REV : Rev. 1.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 3K MODEL NAME : LLDMWW-15K21A (Type II Lens - H:16 V:7 ) LLDMWW-15K22A (Type III Lens - H:135 V:6 ) LLDMWW-15K23A
OPTO Laboratory Test Report IES LM MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCE. Test Date January 16, 2014 to April 8, 2015.
IES LM-80-08 MEASURING LUMEN MAINTENANCE OF LED LIGHT SOURCE Report Number Test Sample Q131107 2T03X5WW11000003 Rating DC 150mA 0.5W Normal CCT 2,700 K Test Date January 16, 2014 to April 8, 2015 Test
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED. Datasheet
ASMT-UYBG / ASMT-UYBH 0.25W Warm White Power PLCC4 Surface Mount LED Datasheet Description The Avago Technologies ASMT-UYBx series 0.25W Cool White Power PLCC4 SMT LED lamps use InGaN chip technology and
Specification LR530 SSC CUSTOMER. Rev. 07 January acriche.com. Document No. : SSC-QP (Rev.00)
Specification LR530 Drawn SSC Approval CUSTOMER Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
Cree XLamp XR-C LEDs. CLD-DS10 Rev 12H. Product family data sheet
Cree XLamp XR-C LEDs Product family data sheet CLD-DS1 Rev 12H Product Description The XLamp XR-C LED gives lighting designers the flexibility and performance to create the next generation of LED lighting
Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 0B Product Description The XLamp XP-L LED is the highest performing discrete in Cree s High-Density (HD) class of LEDs, delivering the next generation
Specification LR521. Drawn Approval Approval. Rev. 05 December 서식번호 : SSC-QP (Rev.00)
Specification LR521 SSC Customer Drawn Approval Approval 1. Features Contents 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color &
Product family data sheet
Product family data sheet CLD-DS56 Rev 0 Cree XLamp XP-E2 LEDs Product Description The XLamp XP-E2 LED builds on the unprecedented performance of the original XP-E by increasing lumen output up to 20%
Product family data sheet
Cree XLamp XP-E LEDs Product family data sheet CLD-DS18 Rev 12 Product Description The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with
LUSTROUS GREEN TECHNOLOGY OF LIGHTING
Technical Datasheet LS 46 High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Lustrous Technology is proud to release the new. Ideal for your high lumen output
Main Applications Bending light Fog lamp Day Running light(drl) Cornering light Working light Warning light
ProLight AJ2N-xA1DF-x 0.5W Power LED Technical Datasheet Version: 1.1 Features Best thermal material solution of the world Best Moisture Sensitivity:JEDEC Level 1 RoHS compliant AEC-Q101 Qualified SAE/ECE/GB
Product family data sheet
Cree XLamp XR-C LEDs Product family data sheet CLD-DS1 Rev 11B Product Description FEATURES Table of contents www.cree.com/xlamp The XLamp XR-C LED gives lighting designers the flexibility and performance
Specification LR530. Drawn Approval Approval. Rev. 08 December Document No. : SSC-QP (Rev.00)
Specification LR530 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
VISIBLE LIGHT PRODUCTS SPECIFICATION
VISIBLE LIGHT PRODUCTS SPECIFICATION HCL-1909AWE-1 Drawn by Checked by Approved by RoHS Conformity DATE:2008/12/18 REV:F DEVICES Part Number Lens Source Color Diffusion Dice Source Color HCL-1909AWE-1
Data Sheet. ASMT-Mx22 / ASMT-MxE2 Moonstone 3 W High Brightness Power LED Light Source. Description. Features. Specifications.
ASMT-Mx22 / ASMT-MxE2 Moonstone 3 W High Brightness Power LED Light Source Data Sheet Description The Moonstone 3W High Brightness Power LED Light Source is a high performance energy efficient device which
MODEL NAME : LLDMWW0-15K*0*A
Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for
Cat# LED Linear High Bay 100W
Cat# 71724 LED Linear High Bay 100W QPL ID # PRNKSMPK OVERALL LAMP PARAMETERS LED DRIVER LIFESPAN & ENVIRONMENT OTHERS Model: Input Voltage Input Current Input Power Power Factor Luminance Luminous Efficiency
Cree XLamp XT-E HVW LEDs
Product family data sheet CLD-DS43 REV 7 Cree XLamp XT-E HVW LEDs Product Description The Cree XLamp XT-E High Voltage White LED provides the lightingclass performance and reliability of Cree XLamp LEDs
CBT-140 White LEDs. CBT-140 Product Datasheet. Features: Table of Contents. Applications
CBT-140 White LEDs Features: Table of Contents Technology Overview...2 Test Specifications...2 Binning Structure...3 Chromaticity Bins...4 Product Shipping & Labeling Information...7 Electrical Characteristics...
Features. Typical Applications. ProLight PM2B-3LxS-SD 3W Power LED Technical Datasheet Version: /10
ProLight PM2B-3LxS-SD 3W Power LED Technical Datasheet Version: 1.9 Features High flux per LED Various colors Good color uniformity RoHS compliant More energy efficient than incandescent and most halogen
爍 (D) Shwo(D) 1W Series
Shwo(D) Introduction The Shwo(D) series is a surface-mount high-power device featuring high brightness combined with a compact size that is suitable for all kinds of lighting applications such as general
Everlight EZHVD 1W LED Series
Everlight Introduction The High Voltage (HV) LED is a surface-mount high voltage component featuring compact size, high brightness, and DC input voltage that more closely resembles the V rms of AC mains
Customer Approval Sheet
Customer Approval Sheet Product: 3014 White SMD LED Part Number: PT30A02 V0 (5600K) Customer: Issue Date: 2011/01/03 Feature High brightness Top view LED Dice Technology : InGaN Small package outline (LxWxH)
Cree XLamp ML-E LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS CLD DS-30 REV 1 PRODUCT FAMILY DATA SHEET
Cree XLamp ML-E LEDs PRODUCT FAMILY DATA SHEET CLD DS-30 REV 1 WWW. CREE.COM/XLAMP PRODUCT DESCRIPTION The Cree XLamp ML-E LED brings lighting-class reliability and performance to 1/2-watt LEDs. The XLamp
SPECIFICATIONS OF CITILIGHT 1 / Scope of Application These specifications apply to chip type LED lamp, CITILIGHT, model CL-822 -U1D-T.
SPECIFICATIONS OF 1 / 11 1. Scope of Application These specifications apply to chip type LED lamp,, model CL-822 -U1D-T. 2. Part code C L - 8 2 2 - U 1 D - T Series 822 : White LED for general lighting.
YJ-BC-270H-G01 High CRI LED
YJ-BC-270H-G01 PRODUCT: HIGH CRI CHIP ON BOARD LED FEATURES: 27 mm 27 mm x 0.5 mm chip-on-board LED Φ19 mm light emission surface 120 emission angle 95 min Ra DESCRIPTION Yuji LED s BC270H series high
PRODUCT DATA SHEET. Eagle Eye Outdoor LED Module 5700K. RoHS Compliant. CUSTOMER :. DATE : REV : Rev. 2.0.
CUSTOMER :. DATE : 213. 4. 23. REV : Rev. 2.. PRODUCT DATA SHEET Eagle Eye Outdoor LED Module 57K MODEL NAME : LLDMWW-15K71A (Type II Lens - H:16 V:7 ) LLDMWW-15K72A (Type III Lens - H:135 V:6 ) LLDMWW-15K73A
Preliminary March 22, 2011
Cree XLamp CXA2011 LED PRODUCT FAMILY DATA SHEET CLD DS-40 PRELIMINARY WWW. CREE.COM/XLAMP PRODUCT DESCRIPTION The Cree XLamp CXA2011 LED brings lighting-class reliability and performance to easy-to-use
Product family data sheet
Product family data sheet CLD-DS56 Rev 2 Cree XLamp XP-E2 LEDs Product Description The XLamp XP-E2 LED builds on the unprecedented performance of the original XP-E by increasing lumen output up to 2% while
ASMT-UWBG / ASMT-UWBH / ASMT-UWBJ 0.25W Cool White Power PLCC4 Surface Mount LED Datasheet
ASMT-UWBG / ASMT-UWBH / ASMT-UWBJ 0.25W Cool White Power PLCC4 Surface Mount LED Datasheet CAUTION: Static sensitive device. Please observe appropriate precautions during handling and processing. Description
Cree XLamp XB-H LEDs. Table of Contents. CLD-DS90 Rev 1J. Product family data sheet
Product family data sheet CLD-DS90 Rev 1J Cree XLamp XB-H LEDs Product Description The XLamp XB-H LED delivers a breakthrough combination of lumen output and efficacy in a small package. Delivering more
Cree XLamp XP-E LEDs Data Sheet
Cree XLamp XP-E LEDs Data Sheet The XLamp XP-E LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 8% smaller footprint. The XLamp XP-E LED continues
U LED modules, converters and systems GENERAL ILLUMINATION. Umodule SPOT P320-3 umodule SPOT PHASED OUT 46,5 39,5 35,5 NTC NTC LED + LED 8,5 4,5 8,5
Product description Spotlights Downlights High-flux LED module Narrow colour temperature tolerance band Lifetime up to 5, hours Compact design Excellent thermal management 1 NTC for temperature control
Specification SPW08F0D
Specification SPW08F0D Drawn SSC Approval Customer Approval SPW08F0D 1. Description 2. Absolute Maximum Ratings 3. Electro Optical Characteristics 4. Characteristic Diagram 5. Reliability 6. CIE Chromaticity
Product Description. features. CLD DS-40 Rev 1. Product family data sheet
Cree XLamp CXA2011 LED Product family data sheet CLD DS-40 Rev 1 www. cree.com/xlamp Product Description The Cree XLamp CXA2011 LED brings lighting-class reliability and performance to easy-to-use LED
LUSTROUS DREAM V3. High Power Solid-State LED Light Source. Introduction
High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Dream V3 is an energy-efficient building block generating enough light outputs suitable for most applications
SPECIFICATIONS FOR WHITE LED
SPECIFICATIONS FOR WHITE LED RF-Q14SA**B-**-N size : 2.0x1.4x0.55mm Thermally Enhanced EMC Package Design Pb-free Reflow Soldering Application Product Selection Table Model No. Color CCT Chip RF-Q14SA27B-**-N
3mm Phototransistor PT204-6C
Features Fast response time High photo sensitivity Pb free RoHS Compliance This product itself will remain within RoHS compliant version. Copliance with EU REACH Compliance Halogen Free.(Br
Product family data sheet
Product family data sheet CLD-DS56 Rev 4 Cree XLamp XP-E2 LEDs Product Description The XLamp XP-E2 LED builds on the unprecedented performance of the original XP-E by increasing lumen output up to 2% while
CSM-360 LEDs. CSM-360 Product Datasheet. Features: Table of Contents. Applications
CSM-360 LEDs Features: Extremely high optical output: Over 6,000 lumens from a single package (white) Table of Contents Technology Overview...2 Test Specifications...2 White Binning Structure...3 Chromaticity
CBT-90 LEDs. CBT-90 Product Datasheet. Features: Table of Contents. Applications. Technology Overview...2
CBT-9 LEDs Table of Contents Technology Overview...2 Test Specifications...2 White Binning Structure...3 White Chromaticity Bins...4 Red, Green, Blue Binning Structure...5 Product Shipping & Labeling Information...6
1. Packaging Outline Dimensions Specifications ) Absolute Maximum Ratings (Ta=25 C)... 4
Table of contents 1. Packaging Outline Dimensions... 3 2. Specifications... 4 1) Absolute Maximum Ratings (Ta=25 C)... 4 2) Typical Electro-Optical Characteristics (Ta=25 C)... 5 3. Product Code & Ranks...
Data Sheet. ASMT-Ax3x 3W Power LED Light Source. Features. Description. Applications
ASMT-Ax3x 3W Power LED Light Source Data Sheet Description This 3W Power LED Light Source is a high performance energy efficient device which can handle high thermal and high driving current. The exposed
Cree XLamp MX-3 LEDs Data Sheet
Cree XLamp MX-3 LEDs Data Sheet The Cree XLamp MX-3 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC package. The XLamp MX-3 LED continues Cree s
LUSTROUS GREEN TECHNOLOGY OF LIGHTING
Technical Datasheet LS 72 High Power Solid-State LED Light Source Introduction For a brighter solid-state light source, Lustrous Technology is proud to release the new. Ideal for your high lumen output
Specification LW520A
Specification LW520A SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
SMD Top View LEDs EAPL4014WA1
SMD Top View LEDs Features Top View White LEDs Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection The product itself will remain within RoHS compliant version. Description
Product family data sheet
Cree XLamp MC-E LED Product family data sheet CLD-DS16 Rev 11A MC-E White MC-E Color MC-E Dynamic White www.cree.com/xlamp Product Description The XLamp MC-E LED is a family of lighting-class, multi-chip
Technical Datasheet. Lamp LEDs are effective in hot thermal. and humid condition. This high brightness. Features
Technical Datasheet Lamp LEDs are effective in hot thermal and humid condition. This high brightness and weatherresistant packaging design makes these Lamp LEDs ideal for outdoor applications such as traffic
Cree XLamp MP-L EasyWhite LEDs Data Sheet / Binning & Labeling Document
Cree XLamp MP-L EasyWhite LEDs Data Sheet / Binning & Labeling Document The XLamp MP-L EasyWhite eliminates traditional chromaticity binning and maximizes lumen density, enabling luminaire and bulb retrofit
Technical Notes. Introduction. PCB (printed circuit board) Design. Issue 1 January 2010
Technical Notes Introduction Thermal Management for LEDs Poor thermal management can lead to early LED product failure. This Technical Note discusses thermal management techniques and good system design.
Table of Contents. Product Description. features. CLD-DS80 Rev 0C. Product family data sheet
Cree XLamp CXA3070 LED Product family data sheet CLD-DS80 Rev 0C Product Description features Table of Contents www.cree.com/xlamp The XLamp CXA3070 LED array expands Cree s family of high flux, multi
Cree XLamp XQ-A LEDs. Table of Contents. CLD-DS135 Rev 1C. Product family data sheet
Cree XLamp XQ-A LEDs Product family data sheet CLD-DS135 Rev 1C Product Description The XLamp XQ-A LED brings a mid power, cost effective option to the proven, compact ceramic XQ package, enabling lighting
Product family data sheet
Cree XLamp XP-L LEDs Product family data sheet CLD-DS97 Rev 1B Product Description The XLamp XP-L LED is the highest performing discrete in Cree s High-Density (HD) class of LEDs, delivering the next generation
Cree XLamp XP-C LEDs Data Sheet
Cree XLamp XP-C LEDs Data Sheet The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-C LED continues
Product family data sheet
Product family data sheet CLD-DS51 Rev 8 Cree XLamp XP-G2 LEDs Product Description The XLamp XP-G2 LED builds on the unprecedented performance of the original XP-G by increasing lumen output up to 20%
Available in white (2,600 K to 8,300 K CCT) Maximum drive current: 400 ma. Wide viewing angle: 120. Electrically neutral thermal path
PRODUCT FAMILY DATA SHEET CLD-28 REV 0 Cree XLamp MX-3 LEDs PRODUCT DESCRIPTION The Cree XLamp MX-3 LED provides the proven lighting-class performance and reliability of Cree XLamp LEDs in a flat-top PLCC
AB3528-XXW-00. PIN 1 Mark 0.90(.035)
AB3528-XXW-00 1. Emitted Color : White, CCT:3700-5400K 2. Lens Appearance : Yello Diffuse 3. 3.5x2.8x1.9mm standard package 4. Suitable for all SMT assembly methods 5. Compatible
Optical Measurement Guidelines for High-Power LEDs and Solid State Lighting Products
White Paper Optical Measurement Guidelines for High-Power LEDs and Solid State Lighting Products 1. Introduction The LED industry is growing rapidly and this naturally brings up an important need for reliable
LAMP UTW/S400-X9/T10(WS)
Features Popular 5mm package High luminous power Typical chromaticity coordinates x=0.24, y=0.20 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 150V The product itself
LED Modules. Fortimo. FastFlex 2x4/730 Gen 3 DA The Philips Fortimo LED system FastFlex gen 3 portfolio has been designed
LED Modules Fortimo FastFlex 2x4/73 Gen 3 DA The Philips Fortimo LED system FastFlex gen 3 portfolio has been designed to offer a suitable solution to OEMs who want to distinguish themselves through their
CLD-DS45 Rev 4. Product family data sheet
Product family data sheet CLD-DS45 Rev 4 Cree XLamp XB-D White LEDs PRODUCT DESCRIPTION The XLamp XB-D is Cree s newest lighting class LED, bringing the next generation of performance and price to LED
Table of Contents. Product Description. features. CLD-DS68 Rev 0C. Product family data sheet
Cree XLamp CXA3050 LED Product family data sheet CLD-DS68 Rev 0C Product Description features Table of Contents www.cree.com/xlamp The XLamp CXA3050 LED array expands Cree s family of high flux, multi
Report No.: HZ p. (Lumens) Stabilization Time CRI (K)
Test Summary Sample Tested: ML2LA23LTRBNI827 Luminous Efficacy Total Luminous Flux Power (Lumens /Watt) (Lumens) (Watts) Power Factor 73.6 1737.0 23.61 0.9872 CCT Stabilization Time CRI (K) (Light & Power)
Power LED I TECHNICAL DATA
Power LED I TECHNICAL DATA W10190 N10190 D10190 B10190 G10190 R10190 C10190 A10190 Rev09 2005/09 1 SPECIFICATIONS Features Super high flux output and high luminance Designed for high current operation