Review of CMC Template. Yoshiya Terao (NMIJ Fluid Flow Div.) WGFF Workshop, June 2012 Abridged for APMP/TCFF meeting, Nov. 2012
|
|
- Caren Powell
- 5 years ago
- Views:
Transcription
1 Review of CMC Template Yoshiya Terao (NMIJ Fluid Flow Div.) WGFF Workshop, June 2012 Abridged for APMP/TCFF meeting, Nov. 2012
2 Example of CMC table A B C D E F G H I J K L M N R Current CMC table (Sample) Measurement Conditions/Independent Variable Expanded Uncertainty #1 #2 #3 #4 Class Mass water Volume water Mass hydrocarbon Volume hydrocarbon Calibration or Measurement Service Instrument or Artifact Instrument Type or Method Minimum Maximum Units Parameter Specifications Value Units Covera ge Factor Level of Confide nce Water meter Coriolis kg/s Fluid water % 2 95% Yes Water meter Positive displacement, turbine, differential pressure, ultrasonic, vortex meter, electromagnetic 100 kpa to 250 kpa Is the expande d uncertai nty a m 3 /h Fluid water % 2 95% Yes Oil meter Coriolis kg/s Fluid Oil meter Measurand Level or Range Positive displacement, turbine, ultrasonic m 3 /h Fluid 100 kpa to 250 kpa hydrocarbon (light oil, kerosene) % 2 95% Yes 100 kpa to 700 kpa 10 t, 1 t hydrocarbon (light oil, kerosene) % 2 95% Yes 100 kpa to 700 kpa 10 t, 1 t same for mass and volume both numbers have been rounded during calcuration Comments
3 New proposal Use the smaller uncertainty (mass or volume) as the expanded uncertainty. The larger uncertainty and corresponding flow range should be included in the comments section. The classification needs to be changed accordingly.
4 Modified according to the new proposal A B C D E F G H I J K L M N R New proposal Measurement Conditions/Independent Variable Expanded Uncertainty Calibration or Measurement Service Class Water Instrument or Artifact Water meter Instrument Type or Method Coriolis, Positive displacement, turbine, differential pressure, ultrasonic, vortex meter, electromagnetic Measurand Level or Range Minimum Maximum Units Parameter Specifications Value Units Is the Level of expande Coverag Confide d e Factor nce uncertai nty a Comments m 3 /h Fluid water % 2 95% Yes #1 100 kpa to 250 kpa Information about mass flow rate Mass flow rate: 13.9 to 833 mkg/s 3 /h with same uncertainty #3 Hydrocar bon Oil meter Coriolis, Positive displacement, turbine, ultrasonic kg/s Fluid hydrocarbon (light oil, kerosene) % 2 95% Yes 100 kpa to 700 kpa 10 t, 1 t Smaller uncertainty Larger uncertainty and corresponding flow range Volume flow rate: 3 to 300 m 3 /h with expanded uncertainty of %
5 Other issues "Instrument Type or Method : The reference flow standard of the calibration service should be written here. Unit: "dm 3 " should be replaces by "L Change Heat flow to Hot water flow or Enthalpy flow?
6 Example with " Instrument Type or Method " description A B C D E F G H I J K L M N R New proposal Measurement Conditions/Independent Variable Expanded Uncertainty Class Calibration or Measurement Service Instrument or Artifact Instrument Type or Method 50t weighing Water Water meter tank with flying start and stop Measurand Level or Range Minimum Maximum Units Parameter Specifications Value Units Is the Level of expande Coverag Confide d e Factor nce uncertai nty a Comments m 3 /h Fluid water % 2 95% Yes #1 the reference flow standard of the calibration service 100 kpa to 250 kpa Information about mass flow rate Mass flow rate: 13.9 to 833 m 3 /h with same uncertainty #3 Hydrocar bon Oil meter 10t weighing tank with flying start and stop kg/s Fluid hydrocarbon (light oil, kerosene) % 2 95% Yes 100 kpa to 700 kpa 10 t, 1 t Smaller uncertainty Larger uncertainty and corresponding flow range Volume flow rate: 3 to 300 m 3 /h with expanded uncertainty of %
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RS CALIBRATION SERVICES, INC. 1047 Serpentine Lane Pleasanton, CA 94566 Mr. Ralph Sabiel Phone: 925 462 4217 CALIBRATION Valid To: April
More informationClassification of services in Acoustics, Ultrasound and Vibration
Classification of services in Acoustics, Ultrasound and Vibration Last update: December 2017 1 Metrology Area: Acoustics, Ultrasound and Vibration Branch: Sound in Air 1. Measurement microphones 1.1 Pressure
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Additel Corporation 2900 Saturn Street Brea, CA 92821 Eric Chavier Phone: 714-998-6899 Fax: 714-998-6999 E-mail: eric.chavier@additel.com URL: http://additel.com
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Navy Primary Standards Laboratory NAVAIR North Island Code 4.12.9 Bldg. 469S P.O. Box 357058 San Diego, CA 92135-7058 Mr. Al Teruel Phone: 619-545-7912 Fax
More informationNEW VSL Conditioning plate!
Calibration of Prover Tanks using a Coriolis Mass Flow Meter as the Master Meter. Is this possible for Pipe Prover calibration too? Erik Smits (fsmits@vsl.nl) 2 nd European Flow Measurement Workshop Sintra,
More informationFor the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Navy Primary Standards Laboratory NAVAIR North Island Code 4.12.9 Bldg. 469S P.O. Box 357058 San Diego, CA 92135-7058 Mr. Al Teruel Phone: 619-545-7912 Fax
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 EQUIPMENT SERVICES GROUP, LLC 3269 Hilton Rd. Ferndale, MI 48220 Michael Macauley Phone: 248 227 5310 CALIBRATION Valid To: December
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationCertificate of Accreditation to ISO/IEC 17025:2005
United States Department of Commerce National Institute of Standards and Technology Certificate of Accreditation to ISO/IEC 17025:2005 NVLAP LAB CODE: 200508-0 Insco Metrology, Inc. Miami, FL is accredited
More informationTwo mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW SVCET
Two mark questions and answers UNIT I BASIC CONCEPT AND FIRST LAW 1. What do you understand by pure substance? A pure substance is defined as one that is homogeneous and invariable in chemical composition
More informationINTERNATIONAL KEY COMPARISON OF LIQUID HYDROCARBON FLOW FACILITIES CCM-FF-K2 (Final Report) BIPM Pavillon de Breteuil F Sevres France
INTERNATIONAL KEY COMPARISON OF LIQUID HYDROCARBON FLOW FACILITIES CCM-FF-K2 (Final Report) A Report for BIPM Pavillon de Breteuil F-92312 Sevres France Project No: FFIN56 October 2008 Report No: XXXX/XXX
More informationThe Reynolds Number Correction of Liquid Ultrasonic Meters and Coriolis Meters
The Reynolds Number Correction of Liquid Ultrasonic Meters and Coriolis Meters!"#$%&'()'#$**+,#$-+,# 0.1%!!!!!! We have to remember that in Liquid Custody Transfer Measurement we are looking for 0.1% s!
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: AMC LABS S.A de C.V (Hereinafter called the Organization)
More informationWGFF Guidelines for CMC Uncertainty and Calibration Report Uncertainty
WGFF Guidelines for CMC Uncertainty and Calibration Report Uncertainty October 21, 2013 Summary The Working Group for Fluid Flow (WGFF) defines Calibration and Measurement Capability (CMC) uncertainty
More informationSELECCIÓN DE CAUDALIMETROS. Tablas de Fabricantes
SELECCIÓN DE CAUDALIMETROS Tablas de Fabricantes Flow Meter Selection Table http://www.instrumart.com/content.aspxcontentid=219 Página 1 de 1 17/09/2007 KEY Best for this application OK with some exceptions
More informationFlow Monitoring Technologies in Oil and Gas. Don Ford, Technical Specialist Spartan Controls Ltd.
Flow Monitoring Technologies in Oil and Gas Don Ford, Technical Specialist Spartan Controls Ltd. Agenda Flow technologies at a glance Oil and Gas at a glance Select Flow Technologies in Depth Differential
More informationCOMPARISON OF INMETRO AND INTI HUMIDITY STANDARDS. Final Report
SIM.T-K6.4 INMETRO / INTI Final Report COMPARISON OF INMETRO AND INTI HUMIDITY STANDARDS Final Report Instituto Nacional de Metrologia, Qualidade e Tecnologia (INMETRO) Instituto Nacional de Tecnología
More informationFlare/Vent Metering. Lex Scheers. If you can t t measure, you can t t manage. Advanced Production Management
Advanced Production Management Flare/Vent Metering If you can t t measure, you can t t manage Lex Scheers lex.scheers@shell.com Prepared for Hydrocarbon Production Accounting workshop Moscow, 16-17 Dec
More informationME411 Engineering Measurement & Instrumentation. Winter 2017 Lecture 11
ME411 Engineering Measurement & Instrumentation Winter 2017 Lecture 11 1 Flow Measurement Identify an effect that depends on flow rate Process control requires accurate measurement of flow control Mixing
More informationUsing the Coriolis Acceleration to Design a Digital Mass Flow Meter
Global Journal of Scientific Researches Available online at gjsr.blue-ap.org 2016 GJSR Journal. Vol. 4(2), pp. 9-15, 30 April, 2016 E-ISSN: 2311-732X Using the Coriolis Acceleration to Design a Digital
More informationRoll No. :... Invigilator s Signature :.. CS/B.Tech (EIE)/SEM-5/EI-501/ INDUSTRIAL INSTRUMENTATION II
Name : Roll No. :.... Invigilator s Signature :.. CS/B.Tech (EIE)/SEM-5/EI-501/2011-12 2011 INDUSTRIAL INSTRUMENTATION II Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationFLOW MEASUREMENT. INC 102 Fundamental of Instrumentation and Process Control 2/2560
FLOW MEASUREMENT INC 102 Fundamental of Instrumentation and Process Control 2/2560 TABLE OF CONTENTS A. INTRODUCTION B. LOCAL FLOW MEASUREMENT B.1 Particle Image Velocimetry (PIV) B.2 Laser doppler anemometry
More informationELECTRONIC FLOWMETERS FOR THERMAL ENERGY MEASUREMENT. By Dr. Crainic Monica Sabina
ELECTRONIC FLOWMETERS FOR THERMAL ENERGY MEASUREMENT By Dr. Crainic Monica Sabina Luxten Lighting Company AEM Branch Office Gas and Water Meters Research Department 26 Calea Buziaşului300693 Timişoara
More informationLinearity of Coriolis Flowmeters at Full Scale Value. Dr. Jesús Aguilera - Endress + Hauser Paul Ceglia - Endress + Hauser
Linearity of Coriolis Flowmeters at Full Scale Value Dr. Jesús Aguilera - Endress + Hauser Paul Ceglia - Endress + Hauser Products Solutions Services Linearity of Coriolis flowmeters at full scale value
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MAC CALIBRATIONS, LLC 13500 Pearl Road, Suite 139, Box 105 Strongsville, OH 44136 William McCarraher Phone: 440 572 1790 CALIBRATION
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Laboratory locations: Schedule of Accreditation 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 1G Kilroot Business Park Carrickfergus Co Antrim BT38 7PR Contact: Mr R E Hughes Tel:
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL Lasheila Hayes Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ADVANCED TECHNOLOGY SERVICES HMA 1800 Honda Drive Lincoln, AL 35096 Lasheila Hayes Phone: 205 505 0296 CALIBRATION Valid to: April 30, 2019 Certificate Number:
More informationPublic Outreach Meeting. Proposed Revision of Onshore Orders 3, 4, and 5
Public Outreach Meeting Proposed Revision of Onshore Orders 3, 4, and 5 December 1st, 3rd, and 8th, 2015 Outline Why are these regulations important? Why are we revising these Orders? Changes proposed
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ALLOMETRICS, INC Bayport Blvd. Seabrook, TX Terry Baldwin Phone: CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ALLOMETRICS, INC. 2500 Bayport Blvd. Seabrook, TX 77586 Terry Baldwin Phone: 281 474 3329 CALIBRATION Valid To: April 30, 2019 Certificate Number: 2039.01 In
More informationCALIBRATION CERTIFICATE # 503
CALIBRATION CERTIFICATE # 503 Calibration date : 2011-02-23 Certificate issued : 2012-04-18 Company name Company address City, Province, Canada CLAS 2009-02 Calibration of Mass flow meter Micro Motion
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCHAPTER 28 PRESSURE IN FLUIDS
CHAPTER 8 PRESSURE IN FLUIDS EXERCISE 18, Page 81 1. A force of 80 N is applied to a piston of a hydraulic system of cross-sectional area 0.010 m. Determine the pressure produced by the piston in the hydraulic
More informationDescribe Coriolis Mass Flowmeters
Training Module Human Development HDC Human Development All rights reserved. No part of this publication may be copied, reproduced, stored in a computer or retrieval system, published, distributed, or
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QAL-TEK ASSOCIATES 3998 Commerce Circle Idaho Falls, ID 83401 Travis Snowder Phone: 208 523 5557 CALIBRATION Valid To: January 31, 2019
More informationRelation between Velocity Profile and Friction Factor at High Reynolds Number in Fully Developed Pipe Flow
Relation between Velocity Profile and Friction Factor at High Reynolds Number in Fully eveloped Pipe Flow Noriyuki Furuichi and Yoshiya Terao National Metrology Institute of Japan National Institute of
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of:. (Hereinafter called the Organization) and hereby
More informationThe Uncertainty of Flow Meter Measurement. Mr.Surachart Changpanich Flowlab & Service Co.,Ltd.
The Uncertainty of Flow Meter Measurement By Mr.Surachart Changpanich Flowlab & Service Co.,Ltd. Email : surachart.flowlab@outlook.com Mobile Phone : 081-8617005 Line ID : Surachart_59 NSC-TISI-TIS 17025
More informationFLOW MEASUREMENT VERIFYING YOUR VALUE Small Volume Provers
James Hensley June 21, 2017 FLOW MEASUREMENT VERIFYING YOUR VALUE Small Volume Provers Honeywell Internal Today s Topics Fundamentals of meter proving - Definitions - Financial Impact - Traceability -
More informationFlow Measurement in Pipes and Ducts COURSE CONTENT
Flow Measurement in Pipes and Ducts Dr. Harlan H. Bengtson, P.E. COURSE CONTENT 1. Introduction This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit.
More informationMeasurement And Uncertainty
Measurement And Uncertainty Based on Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, NIST Technical Note 1297, 1994 Edition PHYS 407 1 Measurement approximates or
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 A.A. JANSSON Inc. 2070 Airport Road Waterford, MI 48327-1204 Justin Frazzini Phone: 248 674 4811 CALIBRATION Valid To: August 31, 2016
More informationThe MMs are 4 KRAL screw meters, normally permanently installed in the BEV test rig as secondary working standards.
Report: Intercomparison of calibration of master meters (screw meters) installed in a test rig, by two independent test methods (by BEV-standard capacity tanks and by CMI- Brooks piston prover) Euromet
More informationFinal Report on the APMP Air Speed Key Comparison (APMP.M.FF-K3)
Final Report on the APMP Air Speed Key Comparison (APMP.M.FF-K3) July, 00 (Revised) Yoshiya Terao, Yong Moon Choi, Mikhail Gutkin 3, Wu Jian 4, Iosif Shinder 5 and Cheng-Tsair Yang 6 NMIJ, AIST, Japan
More informationCalibration and Measurement of Micro Liquid Flow APMP 2011 TCFF Workshop Chun-Min Su, Ph.D. CMS/ITRI Dec. 03, Kobe, Japan 1 Content Introductio
77 3 Dec. 2011, Kobe, Japan Calibration and Measurement of Micro Liquid Flow APMP 2011 TCFF Workshop Chun-Min Su, Ph.D. CMS/ITRI Dec. 03, 2011 @ Kobe, Japan 1 Content Introduction Micro Flow Measurements
More informationThe Uncertainty of a Waterdraw Calibration vs. Gravimetric Calibration on Small Volume Provers
The Uncertainty of a Waterdraw Calibration vs. Gravimetric Written by: Gary Cohrs Introduction The focus of the API Petroleum Measurement Manuals is to reduce the uncertainty and improve the accuracy of
More informationAdjustment procedures and their corresponding uncertainties
Adjustment procedures and their corresponding uncertainties Jos van der Grinten Chief Metrologist, NMi EuroLoop Contents! Introduction! Currently applied adjustment procedures! Residuals! Uncertainties!
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Compania Nacional de Metrologia S.A.S - Conamet
More informationDoubt-Free Uncertainty In Measurement
Doubt-Free Uncertainty In Measurement Colin Ratcliffe Bridget Ratcliffe Doubt-Free Uncertainty In Measurement An Introduction for Engineers and Students Colin Ratcliffe United States Naval Academy Annapolis
More informationCHAPTER (13) FLOW MEASUREMENTS
CHAPTER (13) FLOW MEASUREMENTS 09/12/2010 Dr. Munzer Ebaid 1 Instruments for the Measurements of Flow Rate 1. Direct Methods: Volume or weight measurements. 2. Indirect Methods: Venturi meters, Orifices
More informationCVE 372 HYDROMECHANICS EXERCISE PROBLEMS
VE 37 HYDROMEHNIS EXERISE PROLEMS 1. pump that has the characteristic curve shown in the accompanying graph is to be installed in the system shown. What will be the discharge of water in the system? Take
More informationCONCEPTS AND DEFINITIONS. Prepared by Engr. John Paul Timola
CONCEPTS AND DEFINITIONS Prepared by Engr. John Paul Timola ENGINEERING THERMODYNAMICS Science that involves design and analysis of devices and systems for energy conversion Deals with heat and work and
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 POLYMER TESTING INSTRUMENTS, INC. 10 National Drive Fletcher, NC 28732 Larry Eisner Phone: 828 252 1326 CALIBRATION Valid To: June 30,
More informationTheory and Design for Mechanical Measurements
Theory and Design for Mechanical Measurements Third Edition Richard S. Figliola Clemson University Donald E. Beasley Clemson University John Wiley & Sons, Inc. New York / Chichester / Weinheim / Brisbane
More informationTraining Benefits Adding Values to Your Systems/ Organization through: Potential Attendees These Courses have been designed for;
Potential Attendees These Courses have been designed for; Calibration engineers and Technicians. Training Benefits Adding Values to Your Systems/ Organization through: Planning Engineers and decision makers.
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. J. A. KING & COMPANY, LLC 8813 Old Craft Road Olive Branch, MS CONNIE FOSTER PHONE:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 J. A. KING & COMPANY, LLC 8813 Old Craft Road Olive Branch, MS 38654 CONNIE FOSTER PHONE: 800 327 7727 CALIBRATION Valid To: August 31, 2019 Certificate Number:
More informationCalibration Models and Uncertainty Analysis of the Euroloop Liquid Hydrocarbon Flow Facility
Calibration Models and Uncertainty Analysis of the Euroloop Liquid Hydrocarbon Flow Facility Jos van der Grinten 1 and Bart van der Stap 2 1 NMi EuroLoop, Petroleumweg 36, 3196 KD Rotterdam-Vondelingenplaat,
More informationIGHEM 2016 Linz, August 24 th - 26 th 2016 STATISTICAL ANALYSIS ON EXPERIMENTAL CALIBRATION DATA FOR FLOWMETERS IN PRESSURE PIPES
IGHEM 6 Linz, August 4 th - 6 th 6 STATISTICAL ANALYSIS ON EXPERIMENTAL CALIBRATION DATA FOR FLOWMETERS IN PRESSURE PIPES Lazzarin A., Orsi E., Sanfilippo U. alessandro.lazzarin@polimi.it, enrico.orsi@polimi.it,
More information6.5 Work and Fluid Forces
6.5 Work and Fluid Forces Work Work=Force Distance Work Work=Force Distance Units Force Distance Work Newton meter Joule (J) pound foot foot-pound (ft lb) Work Work=Force Distance Units Force Distance
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 POLYMER TESTING INSTRUMENTS, INC. 74 Patton Ave. Asheville, NC 28801 Greg Skory Phone: 828 252 1326 CALIBRATION Valid To: June 30, 2017
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Hards Laboratories cc, t/a Technology Solutions
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 JEM PRECISION 9615 56 Avenue NW Edmonton, Alberta T6E 0B2 Canada Robert Korthuis Phone: 780-440 1933 CALIBRATION
More informationNorth Sea Flow Measurement Workshop
North Sea Flow Measurement Workshop October 22, 2018 - October 24, 2018 Ardoe House Hotel, Blairs, Aberdeen United Kingdom P. Alberto Giuliano Albo, Simona Lago and Giuseppe Cavuoto Total net energy transferred
More informationEngineering Thermodynamics. Chapter 1. Introductory Concepts and Definition
1.1 Introduction Chapter 1 Introductory Concepts and Definition Thermodynamics may be defined as follows : Thermodynamics is an axiomatic science which deals with the relations among heat, work and properties
More informationUncertainty in Humidity Measurement. Helping you make a better measurement.
Uncertainty in Humidity Measurement Helping you make a better measurement. Webinar Presenters Bruce McDuffee Michael Boetzkes Agenda Terms & Definitions Understand the Uncertainty of Your Instrument Understanding
More informationINDUSTRIAL APPLICATION EXPERIENCES OF NEW TYPE FLOW- METERING SYSTEM BASED ON ULTRASONIC-DOPPLER FLOW VELOCITY-PROFILE MEASUREMENT
INDUSTRIAL APPLICATION EXPERIENCES OF NEW TYPE FLOW- METERING SYSTEM BASED ON ULTRASONIC-DOPPLER FLOW VELOCITY-PROFILE MEASUREMENT Michitsugu Mori 1, Kenichi Tezuka 1, Hideaki Tezuka 1, Noriyuki Furuichi
More informationCNG measuring systems for vehicles
CNG measuring systems for vehicles Sistemas de medición de GNC de uso vehicular Part 3 Review (1) METROLOGY - Accuracy - Trueness - Precision - Error - Uncertainty, Type A and Type B - Standard deviation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 MTS FIELD SERVICE 14000 Technology Drive Eden Prairie, MN 55344 Hugh Casper Phone: 518 852 3977 CALIBRATION Valid To: September 30,
More information1.4 Perform the following unit conversions: (b) (c) s. g s. lb min. (d) (e) in. ft s. m 55 h. (f) ft s. km h. (g)
1.4 Perform the following unit conversions: 0.05 ft 1 in. (a) 1L 61in. 1L 1ft (b) 1kJ 650 J 10 J 1Btu 1.0551kJ 0.616 Btu (c) 41 Btu/h 0.15 kw 1kW 1h 600 s 778.17 ft lbf 1Btu ft lbf 99.596 s (d) g 78 s
More informationChapter 5: The First Law of Thermodynamics: Closed Systems
Chapter 5: The First Law of Thermodynamics: Closed Systems The first law of thermodynamics can be simply stated as follows: during an interaction between a system and its surroundings, the amount of energy
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ANÁLISIS POR INSTRUMENTOS Y SOFTWARE PARA S SA DE CV (DBA SOPORTE METROLOGY) 27 Poniente 507, Interior 103, Colonia Chulavista Puebla,
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: AMC LABS S.A de C.V Av. México # 329 Col. Valle De
More informationInnovative Solutions from the Process Control Professionals
Control Station Innovative Solutions from the Process Control Professionals Software For Process Control Analysis, Tuning & Training Control Station Software For Process Control Analysis, Tuning & Training
More information1. Mark the correct statement(s)
1. Mark the correct statement(s) Figure to the right shows a mass measurement scale using a spring. 1.1 The span of the scale is a) 16 kg b) 21 kg c) 11 kg d) 5-16 kg 1.2 The range of the scale is a) 16
More informationFINAL DRAFT: October 25, 2010 API TECHNICAL REPORT FUEL GAS MEASUREMENT. FINAL DRAFT: October 25, 2010 Page 0
FINAL DRAFT: October 25, 2010 API TECHNICAL REPORT FUEL GAS MEASUREMENT FINAL DRAFT: October 25, 2010 Page 0 Foreword Add API boiler plate FINAL DRAFT: October 25, 2010 Page 1 TABLE OF CONTENTS Introduction...
More informationMeasurement Stations. Length, Mass, Volume, Density, Temperature, and Time
Measurement Stations Length, Mass, Volume, Density, Temperature, and Time Length Length measures the distance from end to end on an object; height and width are variations on length. Standard (S.I.) Unit:
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad AERONAUTICAL ENGINEERING QUESTION BANK : AERONAUTICAL ENGINEERING.
Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 00 0 AERONAUTICAL ENGINEERING : Mechanics of Fluids : A00 : II-I- B. Tech Year : 0 0 Course Coordinator
More informationNational Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Sapphire Technical Solutions, L.L.C. 10230 Rodney St. Pineville, NC 28134 Mr. Ron Wathan Phone: 704-561-3100 x106 Fax: 866-829-1502 E-mail: rwathan@sapphirests.com
More informationMeasurement Uncertainty Knowing the Unknown
Measurement Uncertainty Knowing the Unknown Anish Shah FOUNDER and Chief Metrology Officer at Metrologized, LLC, a company founded in 2014 to further the metrology knowledge-base within the manufacturing
More informationECE309 THERMODYNAMICS & HEAT TRANSFER MIDTERM EXAMINATION. Instructor: R. Culham. Name: Student ID Number:
ECE309 THERMODYNAMICS & HEAT TRANSFER MIDTERM EXAMINATION June 19, 2015 2:30 pm - 4:30 pm Instructor: R. Culham Name: Student ID Number: Instructions 1. This is a 2 hour, closed-book examination. 2. Permitted
More informationCommenting template CEN/TC 102 Date : Document: pren 13060
Commenting template CEN/TC 0 Date : 006-09-3 Document: pren 3060 MB Clause / 3.) ) FR general Ge There have been so many discussions during the CEN/TC 0/WG5 meetings these years. The committee has recognised
More informationFinal Results of Bilateral Comparison between NIST and PTB for Flows of High Pressure Natural Gas
Final Results of Bilateral Comparison between NIST and for Flows of High Pressure Natural Gas B. Mickan (, Germany, Bodo.Mickan@ptb.de) H. Toebben (pigsar TM, Germany) A. Johnson (NIST,USA, Aaron.Johnnson@nist.gov)
More informationKeys to the Study of Chemistry. 1.1 Fundamental Definitions
Keys to the Study of Chemistry Chemistry is the study of matter, its properties, changes, and the energy associated with these changes Matter is everything that has mass an occupies space Pure substances
More informationLearning Objectives. Lesson 6: Mathematical Models of Fluid Flow Components. ET 438a Automatic Control Systems Technology 8/27/2015
Lesson 6: Mathematical Models of Fluid Flow Components ET 438a Automatic Control Systems Technology lesson6et438a.pptx 1 Learning Objectives After this presentation you will be able to: Define the characteristics
More informationCorrections related to operation and calibration of liquid flow meters NFOGM Temadag 2016 Morten Marstein, FMC Kongsberg Metering
Corrections related to operation and calibration of liquid flow meters NFOGM Temadag 2016 Morten Marstein, FMC Kongsberg Metering 29.02.2016 FMC Kongsberg Metering General formulas Volumetric flow meter
More informationPropagation of Uncertainties in Measurements: Generalized/ Fiducial Inference
Propagation of Uncertainties in Measurements: Generalized/ Fiducial Inference Jack Wang & Hari Iyer NIST, USA NMIJ-BIPM Workshop, AIST-Tsukuba, Japan, May 18-20, 2005 p. 1/31 Frameworks for Quantifying
More informationInstallation effects on an ultrasonic flow meter with implications for self diagnostics
Flow Measurement and Instrumentation 11 (2000) 109 122 www.elsevier.com/locate/flowmeasinst Installation effects on an ultrasonic flow meter with implications for self diagnostics Carl Carlander *, Jerker
More informationTYPICAL PRESSURE MEASUREMENT UNCERTAINTY DEFINED BY AN FPG8601 FORCE BALANCED PISTON GAUGE
TYPICAL PRESSURE MEASUREMENT UNCERTAINTY DEFINED BY AN FPG8601 FORCE BALANCED PISTON GAUGE Michael Bair and Pierre Delajoud 2002 DEC 10 Revised 2004 MAR 26 FORWARD FPG8601 is a pressure standard designed
More informationA MEASUREMENT ASSURANCE PROGRAM FOR LOW FLOW CALIBRATION BY THE TRANSFER METHOD CS20
A MEASUREMENT ASSURANCE PROGRAM FOR LOW FLOW CALIBRATION BY THE TRANSFER METHOD CS0 JEFF PEERY MAY. 18, 010 This document outlines the Measurement Assurance Program (MAP for Seametrics CS0 flo measurement
More informationProcess Gas Flow Measurement and Performance Evaluation API TECHNICAL REPORT 2571 SECOND EDITION DRAFT, FEBRUARY 2018
Process Gas Flow Measurement and Performance Evaluation API TECHNICAL REPORT 2571 SECOND EDITION DRAFT, FEBRUARY 2018 (Note: modify document as needed once final proposal on name change is agreed, i.e.
More informationSHRI RAMSWAROOP MEMORIAL COLLEGE OF ENGG. & MANAGEMENT
B.Tech. [SEM III (ME-31, 32, 33,34,35 & 36)] QUIZ TEST-1 Time: 1 Hour THERMODYNAMICS Max. Marks: 30 (EME-303) Note: Attempt All Questions. Q1) 2 kg of an ideal gas is compressed adiabatically from pressure
More informationApplication of Density Meters to Liquid Hydrocarbon Measurement
02/2018 Application of Density Meters to Liquid Hydrocarbon Measurement Written by Dean Minehart, Micro Motion, Inc. www.emerson.com/micromotion 1 Introduction The American Petroleum Institute (API) Manual
More informationREPORT OF SPECIAL TEST
REPORT OF SPECIAL TEST OF AIR SPEED INSTRUMENTATION April, 001, System Serial Number 090000 submitted by 05 Perry Parkway Gaithersburg, MD 0877 (Reference: Purchase Order Number 510140 dated April 4, 001)
More informationChem 115 POGIL Worksheet - Week 1 Units, Measurement Uncertainty, and Significant Figures - Solutions
Chem 115 POGIL Worksheet - Week 1 Units, Measurement Uncertainty, and Significant Figures - Solutions Key Questions & Exercises 1. Give the names and their abbreviations for the SI units of length, mass,
More information( afa, ( )) [ 12, ]. Math 226 Notes Section 7.4 ARC LENGTH AND SURFACES OF REVOLUTION
Math 6 Notes Section 7.4 ARC LENGTH AND SURFACES OF REVOLUTION A curve is rectifiable if it has a finite arc length. It is sufficient that f be continuous on [ab, ] in order for f to be rectifiable between
More informationUse of Seismic and EM Data for Exploration, Appraisal and Reservoir Characterization
Use of Seismic and EM Data for Exploration, Appraisal and Reservoir Characterization Anton Ziolkowski and Folke Engelmark Petroleum Geo-Services CSEG, Calgary, 6 May 2009 Outline Exploration, appraisal,
More informationUNIT I Basic concepts and Work & Heat Transfer
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code: Engineering Thermodynamics (16ME307) Year & Sem: II-B. Tech & II-Sem
More informationENT 254: Applied Thermodynamics
ENT 54: Applied Thermodynamics Mr. Azizul bin Mohamad Mechanical Engineering Program School of Mechatronic Engineering Universiti Malaysia Perlis (UniMAP) azizul@unimap.edu.my 019-4747351 04-9798679 Chapter
More informationLaw vs. Theory. Steps in the Scientific Method. Outcomes Over the Long-Term. Measuring Matter in Two Ways
Law vs. Theory A law summarizes what happens A theory (model) is an attempt to explain why it happens. Unit 2: (Chapter 5) Measurements and Calculations Cartoon courtesy of NearingZero.net Steps in the
More information