Flow Monitoring Technologies in Oil and Gas. Don Ford, Technical Specialist Spartan Controls Ltd.
|
|
- Abel Ellis
- 6 years ago
- Views:
Transcription
1 Flow Monitoring Technologies in Oil and Gas Don Ford, Technical Specialist Spartan Controls Ltd.
2 Agenda Flow technologies at a glance Oil and Gas at a glance Select Flow Technologies in Depth Differential Pressure Flow Vortex Flow Coriolis Flow Magmeter Flow Spartan Controls Confidential Page 2
3 Main Flow Technologies At a Glance Ultrasonic In-Line Ultrasonic Strap-On Doppler Effect DP Pressure Thermal Mass Paddle Wheel Positive Displacement Venturi Rotameter Turbine Sonar DP Pressure Gas- orifice Recorder DP Orifice Conditioning Orifice V-cone Pitot Tube Annubar Vortex Magmeter Spartan Controls Confidential Page 3 Coriolis
4 Oil and Gas at a Glance Drilling Activities: Drilling fluids Frack water Upstream Oil and Gas production focuses on separating components Produced Oil Contains: Water Entrained Gas and Dissolved Gasses Oil Produced Gas Contains: Water Condensate (Natural Gas Liquids) Natural Gas Spartan Controls Confidential Page 4
5 Separate the Components Want to know our individual components Gas volumes / Oil Volumes / Water Volumes Paid on Natural Gas and Oil delivered to pipeline AER (Alberta Energy Regulator) Directive 17: Measurement Requirements for Oil and Gas Operations (monthly volume reporting) Royalties Responsible reservoir development Spartan Controls Confidential Page 5
6 Flow Technologies Inferential Meters Accuracy Turn Down Orifice & MultiVariable flow Xmtr ± % 8:1 Averaging Pitot tube & MV Flow ± 1.3% 8:1 ProBar - Matched Annubar & DP Xmtr ± % 5/10:1 Orifice & Analog Transmitter ± 2-4% 4:1 Orifice & Smart Transmitter ± 1-3% 4:1 Integral Orifice assembly ± 1-2% 4/8:1 Velocity Meters ElectroMagnetic ± % 30:1 Vortex ± 0.65% 25:1 Mass Meters Coriolis Elite ± 0.1% 100:1 F ± 0.32% 20:1 Spartan Controls Confidential Page 6
7 Differential Pressure (DP) Flow Measurement DP & Multivariable Transmitters Annubars Integral Orifice Plates Orifice Plates Venturi Nozzles Wedge Spartan Controls Confidential Page 7
8 DP vs Orifice Relationship Upstream Initial Head Maximum Pressure Change Permanent Pressure Loss Final Head After Pressure Recovery FLOW Streamline (Typical) High Pressure Connection Low Pressure Connection Primary Element (Concentric Orifice Plate) Secondary Element DP Transmitter Spartan Controls Confidential Page 8
9 Differential Pressure Accuracy: ±0.25 to >5% Full Scale Flow Rangeability: 3:1 up to 10:1 Fluids: Liquid, Gas, Steam Viscosity: Any Dirty /Clean: Certain types / Yes Meter sizes: ½ to >48 inches Max Pressure*: Up to ~37,895 kpa (5500 Psig) Temp. Range*: Up to ~537 C (1000 F) Relative Pressure Loss: Medium * Limited by differential pressure measurement device Spartan Controls Confidential Page 9
10 Differential Pressure Application Natural Gas Measurement Multivariable Pressure & Temp Correction Modbus to flow computer Fuel Gas Instrument Air Casing Gas / Blanket Gas Spartan Controls Confidential Page 10
11 Vortex Flow Meters Flanged and Wafer Styles Spartan Controls Confidential Page 11
12 Vortex Meter Theory Based on the von Karman Effect Fluid alternately separates from each side of the shedder bar face Vortices form behind the face and cause alternating differential pressures (DP) around the back of the shedder bar The frequency of the alternating vortex development is linearly proportional to flow rate Theodore von Karman Spartan Controls Confidential Page 12
13 Vortex Meter Theory Alternating DP flexes a portion of the shedder bar Flexing motion sensed by piezoelectric sensor element Piezo converts motion to alternating electric signal Electric signal sent to transmitter Frequency of the electric signal is shedding frequency frequency Flow Rate Electronics Sensor Shedder Bar Meter Body Spartan Controls Confidential Page 13
14 Benefits of Vortex Flow Metering Vibration insensitivity to normal plant operation High accuracy and rangeability Measures liquid, gas, and vapor Low pressure drop Unaffected by changes in density and viscosity When measuring actual volumetric flow rates within the Reynolds number and velocity limitations Simple installation Few connections -- reduced fugitive emissions -- low cost High reliability No moving parts Spartan Controls Confidential Page 14
15 Vortex Flow Metering Accuracy (±): % Rate Flow Rangeability: Up to 30:1 Fluids: Liquid, Gas, Steam Viscosity: Low - approx 10 cp Dirty / Clean: Yes/Yes Wet gas Yes Meter sizes: 1/2 16 Max Pressure*: Up to ~15,160 kpa (2,200+ Psig) Temp. Range*: Up to ~ 426 C 800 F) Relative Pressure Loss: Medium * Spec s will vary model to model Spartan Controls Confidential Page 15
16 Vortex Applications High pressure gas Produced Gas Gas Processing Facilities Fuel Gas Glycol (Heat Exchangers) Steam Boiler Oilsands SAGD (Steam Assisted Gravity Drainage) Spartan Controls Confidential Page 16
17 Coriolis Flow Meter Flow, total, Bonus: Density + Temp Mechanically tolerant Entrained gas and sand No viscosity effects Liquid or gas applications Low maintenance No up or down pipe straight Run Cautions: Minimize presence of Gas Watch pressure drops Sensor mounting Spartan Controls Confidential Page 17
18 Theory of Operation - Coriolis The Coriolis effect is an inertia force. In 1835, Gustave-Gaspard de Coriolis showed that this inertia force must be taken into consideration if the simple Newton s Law of Motion of bodies are to be used in a rotating frame of reference. Coriolis Effect: The original path is deflected westward by the rotation of the planet Gasparde de Coriolis Spartan Controls Confidential Page 18
19 Curved Tube Theory Spartan Controls Confidential Page 19
20 Coriolis Flow Meter Accuracy (±): 0.05 to 0.5% Rate Flow Rangeability: 10:1 up to 100:1 Fluids: Liquid, Gas, Steam Viscosity: Any Dirty / Clean: Yes / Yes Meter sizes: 1/10 6,8, 10 Size limits Max Pressure*: Up to ~37,895 kpa (5500 Psig) Temp. Range*: Up to ~ 343 C (650 F) Relative Pressure Loss: Medium * Specs will vary model to model Spartan Controls Confidential Page 20
21 Coriolis Applications Oil Metering Test Separator Sales Oil & Water Transfer Net Oil Calculation (based on density) to determine Oil vs. Water in comingled flow May be used for gas Oil Treating, Oil Terminal or Pipeline Spartan Controls Confidential Page 21
22 Magnetic Flow Meters Two Basic Styles Flanged with Transmitter Wafer with J-Box Spartan Controls Confidential Page 22
23 Theory of Operation: Faraday Law Volumetric Flow: Q = V * A Where: Q = Flow rate V = Velocity A = Area Sensing Electrodes E Faraday s Law: E=kBDV V = E/kBD Where: V = Velocity of conductor K = Proportionality constant E = Induced voltage B = Magnetic field strength D = Length of conductor Flange V D SST Pipe Lining Coils B Spartan Controls Confidential Page 23
24 Magnetic Flow Meters Accuracy (±): 0.25 to 1 % Rate Flow Rangeability: 30:1 Fluids: Liquids Viscosity: Any Dirty / Clean: Yes/Yes Meter sizes*: 1/8 90+ Max Pressure*: Up to ~ 34,450 kpa (5,000 Psig) Temp. Range*: Up to ~ 176 C (350 F) Relative Pressure Loss: Low * Spec s will vary model to model Spartan Controls Confidential Page 24
25 Magnetic Flowmeter Applications Produced Water Frac Fluids Drilling Fluids Disposal Water Effluent water from plant Spartan Controls Confidential Page 25
26 Questions? Flow Monitoring Technologies in Oil and Gas Don Ford, Technical Specialist, Spartan Controls Ltd Spartan Controls Confidential
Instrumentation & Data Acquisition Systems
Instrumentation & Data Acquisition Systems Section 5 -Flow Robert W. Harrison, PE Bob@TheHarrisonHouse.com Made in USA 1 The Perfect Flowmeter Infinite rangeability / turndown with negligible uncertainty
More informationFLOW MEASUREMENT. INC 102 Fundamental of Instrumentation and Process Control 2/2560
FLOW MEASUREMENT INC 102 Fundamental of Instrumentation and Process Control 2/2560 TABLE OF CONTENTS A. INTRODUCTION B. LOCAL FLOW MEASUREMENT B.1 Particle Image Velocimetry (PIV) B.2 Laser doppler anemometry
More informationFundamentals of Flow Metering
Technical Data Sheet 00816-0100-3031 Fundamentals of Flow Metering A reliable flow indication is dependent upon the correct measurement of A and V. If, for example, air bubbles are present in the fluid,
More informationSELECCIÓN DE CAUDALIMETROS. Tablas de Fabricantes
SELECCIÓN DE CAUDALIMETROS Tablas de Fabricantes Flow Meter Selection Table http://www.instrumart.com/content.aspxcontentid=219 Página 1 de 1 17/09/2007 KEY Best for this application OK with some exceptions
More informationELECTRONIC FLOWMETERS FOR THERMAL ENERGY MEASUREMENT. By Dr. Crainic Monica Sabina
ELECTRONIC FLOWMETERS FOR THERMAL ENERGY MEASUREMENT By Dr. Crainic Monica Sabina Luxten Lighting Company AEM Branch Office Gas and Water Meters Research Department 26 Calea Buziaşului300693 Timişoara
More informationABB Flowmeters Review of industrial processing flowmeters
White paper ABB Flowmeters Review of industrial processing flowmeters Understanding flowmeters and their pros and cons By Ron DiGiacomo, ABB Measurement Products One of the most critical measurements in
More informationCHAPTER (13) FLOW MEASUREMENTS
CHAPTER (13) FLOW MEASUREMENTS 09/12/2010 Dr. Munzer Ebaid 1 Instruments for the Measurements of Flow Rate 1. Direct Methods: Volume or weight measurements. 2. Indirect Methods: Venturi meters, Orifices
More informationFlow Measurement: Physical principle employed in various types of flow meters. PART 4 PREPARED BY: ESO OLUWATOBILOBA
Flow Measurement: Physical principle employed in various types of flow meters. PART 4 PREPARED BY: ESO OLUWATOBILOBA Pressure Differential Flow Meters In a differential pressure drop device the flow is
More informationFLOW MEASUREMENT INC 331 Industrial process measurement 2018
FLOW MEASUREMENT INC 331 Industrial process measurement 2018 1 TABLE OF CONTENTS A. INTRODUCTION B. LOCAL FLOW MEASUREMENT B.1 Particle Image Velocimetry (PIV) B.2 Laser doppler anemometry (LDA) B.3 Hot-wire
More informationAn Essential Requirement in CV Based Industrial Appliances.
Measurement of Flow P M V Subbarao Professor Mechanical Engineering Department An Essential Requirement in CV Based Industrial Appliances. Mathematics of Flow Rate The Scalar Product of two vectors, namely
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationAnyone who observes. By Jesse Yoder
Anyone who observes the flowmeter market today can see very quickly that the demand for some types of flowmeters is growing faster than the demand for other types. For example, the use of Coriolis and
More informationME411 Engineering Measurement & Instrumentation. Winter 2017 Lecture 11
ME411 Engineering Measurement & Instrumentation Winter 2017 Lecture 11 1 Flow Measurement Identify an effect that depends on flow rate Process control requires accurate measurement of flow control Mixing
More informationFlow Measurement in Pipes and Ducts COURSE CONTENT
Flow Measurement in Pipes and Ducts Dr. Harlan H. Bengtson, P.E. COURSE CONTENT 1. Introduction This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit.
More informationFlow Measurement in Pipes and Ducts COURSE CONTENT
Flow Measurement in Pipes and Ducts Dr. Harlan H. Bengtson, P.E. COURSE CONTENT 1. Introduction This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit.
More informationFINAL DRAFT: October 25, 2010 API TECHNICAL REPORT FUEL GAS MEASUREMENT. FINAL DRAFT: October 25, 2010 Page 0
FINAL DRAFT: October 25, 2010 API TECHNICAL REPORT FUEL GAS MEASUREMENT FINAL DRAFT: October 25, 2010 Page 0 Foreword Add API boiler plate FINAL DRAFT: October 25, 2010 Page 1 TABLE OF CONTENTS Introduction...
More informationFlow Measurement in Pipes and Ducts
Flow Measurement in Pipes and Ducts Course No: M04-040 Credit: 4 PDH Harlan H. Bengtson, Ph.D., P.E. Continuing Education and Development, Inc. 9 Greyridge Farm Court Stony Point, NY 10980 P: (877) 322-5800
More informationProcess Gas Flow Measurement and Performance Evaluation API TECHNICAL REPORT 2571 SECOND EDITION DRAFT, FEBRUARY 2018
Process Gas Flow Measurement and Performance Evaluation API TECHNICAL REPORT 2571 SECOND EDITION DRAFT, FEBRUARY 2018 (Note: modify document as needed once final proposal on name change is agreed, i.e.
More informationISA Seminars on the Web Live Experts on Hot Topics
ISA Seminars on the Web Live Experts on Hot Topics Standards Certification Education and Training Publishing Conferences and Exhibits CSE PE Exam Review: Measurement II EN00W3 Version 1.4 2011 Standards
More informationPro-V Multivariable Flowmeter Model M22 In-line Vortex
Pro-V Multivariable Flowmeter Model M22 In-line Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More information405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook
405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com 405 and 1595 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test
More informationBy-Pass. This voltage is proportional to the liquid level (threewire potentiometer circuit). The resistance reading can
" " ' " ' / The magnetic field which is in the ball or cylindrical floats actuates very small reed contacts through the wall of a guide tube and these pick up an uninterrupted measuring-circuit voltage
More informationFlare/Vent Metering. Lex Scheers. If you can t t measure, you can t t manage. Advanced Production Management
Advanced Production Management Flare/Vent Metering If you can t t measure, you can t t manage Lex Scheers lex.scheers@shell.com Prepared for Hydrocarbon Production Accounting workshop Moscow, 16-17 Dec
More information405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook
Reference Manual 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com Reference Manual 405 and 1595 405 Compact Orifice Series and 1595 Conditioning
More informationSmart DP Flow Metering A summary of Established Technology and Latest Innovation. Gary Fish
Smart DP Flow Metering A summary of Established Technology and Latest Innovation Gary Fish DP Flow Measurement Established Technology Large range of line sizes, materials, connection interfaces, etc Customised
More informationFlow Introduction. 1.1 Introduction Objectives History of DP Flow Pressure DP Flow
1 DP Flow Introduction TOPIC PAGE 1.1 Introduction... 10 1.2 Objectives... 10 1.3 History of DP Flow... 10 1.4 Pressure... 11 1.5 DP Flow 101... 12 1.6 DP Flow Measurement Applications... 15 1.7 Flowmeter
More informationCone differential pressure flow meter. Operating manual WIDE PLUS PRECISION INSTRUMENTS CO., LTD.
Cone differential pressure flow meter Operating manual WIDE PLUS PRECISION INSTRUMENTS CO., LTD. INDEX Introduction 2 Principle Application The characteristics of flow meter Specification Technical features
More informationAmir Hossein Parvardi 1
Instrumentation 1 1 School of Electrical & Computer Engineering University of Tehran (ECE) October 5, 2015 1 / 1 Flowmeters (ECE) October 5, 2015 2 / 1 Flowmeters Types of Flowmeters Types of Flowmeters
More informationToday s menu. Last lecture. Measurement of volume flow rate. Measurement of volume flow rate (cont d...) Differential pressure flow meters
Last lecture Analog-to-digital conversion (Ch. 1.1). Introduction to flow measurement systems (Ch. 12.1). Today s menu Measurement of volume flow rate Differential pressure flowmeters Mechanical flowmeters
More information405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Data Book and Flow Handbook
405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book and Flow Handbook www.rosemount.com 405 Compact Orifice Series and 1595 Conditioning Orifice Plate Flow Test Book NOTICE Read
More informationVolume and Mass Flow Rate Measurement Author: John M. Cimbala, Penn State University Latest revision: 07 December 2007
Volume and Mass Flow Rate Measurement Author: John M. Cimbala, Penn State University Latest revision: 07 ecember 2007 Introduction and notation In many engineering applications, either mass flow rate or
More informationPro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationProcess Systems. Get More from One. Avantis Foxboro SimSci-Esscor Triconex
Get More from One Avantis Foxboro SimSci-Esscor Triconex Agenda Flow Measurement Presentation : Introduction Differential pressure Flowmeters. Venturi Orifice Plates Averaging Pitot New Designs Linear
More informationComputation of pressure loss for differential producing flowmeters
XXVI. ASR '00 Seminar, Instruments and Control, Ostrava, April 6-7, 00 Paper 5 Computation of pressure loss for differential producing flowmeters ORLÍKOVÁ, Soňa Ing., Ústav automatizace a měřicí techniky,
More informationCORIOLIS MASS FLOW METERS FOR GAS AND LIQUID MEASUREMENT. Michael Keilty (Presented by Hubbard Donald) Endress + Hauser Flowtec AG
Introduction CORIOLIS MASS FLOW METERS FOR GAS AND LIQUID MEASUREMENT Michael Keilty (Presented by Hubbard Donald) Endress + Hauser Flowtec AG A mass flowmeter is a system that provides a measurement of
More information04/01/1998 Developments in DP Flowmeters By Jesse Yoder
04/01/1998 Developments in DP Flowmeters By Jesse Yoder Developments in DP Flowmeters Improvements in Primary Elements Are Keeping Differential Pressure Flowmeters the First Choice for Many Process Applications
More informationAnnubar Primary Element Flow Calculations
Rosemount 485 Annubar Annubar Primary Element Flow Calculations ANNUBAR PRIMARY ELEMENT FLOW EQUATIONS The Annubar primary element flow equations are all derived from the hydraulic equations which are
More informationAPPLICATION OF DENSITOMETERS TO LIQUID MEASUREMENT Class #
APPLICATION OF DENSITOMETERS TO LIQUID MEASUREMENT Class # 2010.1 Joe Harris National Sales Manager Anton Paar USA 10215 Timber Ridge Drive Ashland, VA 23005 Introduction There are a variety of accurate
More informationAccurate Flow Measurements in Changing Process Conditions
Instruments, Valves, and Controls Thank You for Attending Today s Webinar: Accurate Flow Measurements in Changing Process Conditions Your Host Mike DeLacluyse President Lesman Instrument Co miked@lesman.com
More informationExperiment No.4: Flow through Venturi meter. Background and Theory
Experiment No.4: Flow through Venturi meter Background and Theory Introduction Flow meters are used in the industry to measure the volumetric flow rate of fluids. Differential pressure type flow meters
More informationIntegral V-Cone Flowmeter VD series
TRANSMITTER DIRECTLY MOUNTED! SIMPLE AND EASY INSTALLATION Integral V-Cone Flowmeter VD series OUTLINE VD series Integral V-Cone Flowmeter is a differential pressure type flowmeter. Unlikely to existing
More informationCOURSE CODE : 3072 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE
COURSE TITLE : FLUID MECHANICS COURSE CODE : 307 COURSE CATEGORY : B PERIODS/ WEEK : 5 PERIODS/ SEMESTER : 75 CREDIT : 5 TIME SCHEDULE MODULE TOPIC PERIOD 1 Properties of Fluids 0 Fluid Friction and Flow
More informationLarge Rocket Engine Environments
Balanced Flow Metering and Conditioning Technology for Fluid Systems (Space Liquid Propulsion Systems) for 2006 Instrumentation Symposium for the Process Industries Anthony R. Kelley EV23 Advanced Sensors
More informationV-Cone Flowmeter DATASHEET
V-Cone Flowmeter ATASHEET JUNHO 013 IntraCone Cone Flow Meter Type: ICM etail: Cone-Element Technical Information 05/011 FLOW THE SPECIALIST IN LEVEL AN FLOW Cone Flow Meter Technical Information Intra-Automation
More informationDifferential Pressure Producing Flow Elements
Differential Pressure Producing Flow Elements Standards Certification Education & Training Publishing Conferences & Exhibits Fort McMurray, Alberta Differential Pressure Devices for Liquid and Gas Flow
More informationFlow : the motion of a fluid (1) Blood flowmeters : - ultrasonic (doppler, transit time) -electromagnetic (2) Gas flowmeters : - pneumotachometer
Flow Sensors Flow : the motion of a fluid (1) Blood flowmeters : - ultrasonic (doppler, transit time) -electromagnetic (2) Gas flowmeters : - pneumotachometer -spirometer - Wright's respirometer - rotameter
More informationLesson 10. Thermomechanical Measurements for Energy Systems (MENR) Measurements for Mechanical Systems and Production (MMER)
Lesson 10 Thermomechanical Measurements for Energy Systems (MENR) Measurements for Mechanical Systems and Production (MMER) A.Y. 015-16 Zaccaria (Rino ) Del Prete Some VELOCITY measurement techniques linear
More informationMEDIDAS EN FLUIDOS. INEL 5205 Instrumentación. Monday, November 19, 12
MEDIDAS EN FLUIDOS INEL 5205 Instrumentación SENSORES DE PRESIÓN Unidades de Presión 1 psi! 1 lbf/in 2 = 6,894.76! Pa = 6,894.76!newton/m 2 = 68.948 10 3!bar (1 bar = 10 5 Pa) = 68.046 10 3!atm = 51.715
More informationTarget Insertion Flowmeter
Principle of Operation Flow is measured in terms of dynamic force acting on a target (solid disk) in the flow stream. Hermetically sealed, bonded strain gages in a bridge circuit configuration mounted
More informationSiddharth Institute of Engineering & Technology
SIDDHARTH INSTITUTE OF ENGINEERING & TECHNOLOGY :: PUTTUR (AUTONOMOUS) (Approved by AICTE, New Delhi & Affiliated to JNTUA, Anantapuramu) (Accredited by NBA & Accredited by NAAC with A Grade) (An ISO 9001:2008
More informationDUBLIN INSTITUTE OF TECHNOLOGY Kevin Street, Dublin 8.
Question Sheet Page 1 of 5 Instructions for the student: Question 1 is compulsory [40 marks] Attempt any two other questions [30 marks per question] The following must be made available during the examination:
More informationInnovations in Fluid Flow 6 Men that Shaped the World of Flowmetering
By Greg Livelli Innovations in Fluid Flow 6 Men that Shaped the World of Flowmetering In the late 1700s, Swiss physicist Daniel Bernoulli and his father, Johann, separately entered a scientific contest
More informationSITRANS F flowmeters. SITRANS F US System information SITRANS F US Ultrasonic flowmeters 4/181
Siemens AG 09 SITRANS F flowmeters System information Overview Siemens offers two types of ultrasonic flowmeters, in-line flowmeters and clamp-on flowmeters. This offers the end user the maximum flexibility
More informationPro-V Multivariable Flowmeter Model M23 Insertion Vortex
Pro-V Multivariable Flowmeter Model M23 Insertion Vortex Pro-V TM Advantage: Volumetric or mass flow monitoring of most liquids, gases, and steam Multivariable meter delivers mass flow, temperature, pressure,
More informationSONAR-BASED VOLUMETRIC FLOW METER FOR CHEMICAL AND PETROCHEMICAL APPLICATIONS
SONAR-BASED VOLUMETRIC FLOW METER FOR CHEMICAL AND PETROCHEMICAL APPLICATIONS Daniel L. Gysling and Douglas H. Loose CiDRA Corporation 50 Barnes Park North Wallingford, CT 06492 USA Abstract A sonar-based
More information9.1 Introduction. 9.2 Fluid Flow. CHAPTER 9 Flow
CHAPTER 9 9.1 Introduction The accurate measurement of fluid flow is very important in many industrial applications. Optimum performance of many processes requires specific flow rates. The cost of many
More informationLecture23. Flowmeter Design.
Lecture23 Flowmeter Design. Contents of lecture Design of flowmeter Principles of flow measurement; i) Venturi and ii) Orifice meter and nozzle Relationship between flow rate and pressure drop Relation
More informationCoriolis Mass Flowmeter. (MCM Series) 100% Customer Satisfaction MAXIFLO TM. Coriolis Mass Flowmeter Series MCM
MAXIFO TM Features MaxiFlo Coriolis Mass Flowmeter series MCM is a mass flow meter that measures mass flow, density and temperature of liquids, slurries and gases. And it even measures oil content in water.
More informationFlowmeter Discharge Coefficient Estimation
Bankston 1 Flowmeter Discharge Coefficient Estimation Elizabeth Bankston Team 1 Abstract An Edibon FME18 Flow Meter demonstration system was used to obtain experimental values for this experiment. The
More informationRoll No. :... Invigilator s Signature :.. CS/B.Tech (EIE)/SEM-5/EI-501/ INDUSTRIAL INSTRUMENTATION II
Name : Roll No. :.... Invigilator s Signature :.. CS/B.Tech (EIE)/SEM-5/EI-501/2011-12 2011 INDUSTRIAL INSTRUMENTATION II Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full
More informationINTERNATIONAL OIML D 25 DOCUMENT. Vortex meters used in measuring systems for fluids ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
INTERNATIONAL OIML D 25 DOCUMENT Edition 1996 (E) Vortex meters used in measuring systems for fluids Compteurs à vortex utilisés dans les ensembles de mesurage de fluides OIML D 25 Edition 1996 (E) ORGANISATION
More informationCoriolis in the Marine Industry TRICOR Coriolis Technology. All rights reserved.
Coriolis in the Marine Industry 1 Advantages Coriolis Meters Direct Measurement of Mass, Temp, Density Indirect measurement of Volume and Concentration (e.g. BRIX) Accuracy - high precision Swiss Watch
More informationMechanical Measurements and Metrology Prof. S. P. Venkateshan Department of Mechanical Engineering Indian Institute of Technology, Madras
Mechanical Measurements and Metrology Prof. S. P. Venkateshan Department of Mechanical Engineering Indian Institute of Technology, Madras Module - 3 Lecture - 33 Measurement of Volume and Mass Flow Rate
More informationSCHOOL OF CHEMICAL ENGINEERING FACULTY OF ENGINEERING AND TECHNOLOGY SRM UNIVERSITY COURSE PLAN
SCHOOL OF CHEMICAL ENGINEERING FACULTY OF ENGINEERING AND TECHNOLOGY SRM UNIVERSITY COURSE PLAN Course code : CH0317 Course Title : Momentum Transfer Semester : V Course Time : July Nov 2011 Required Text
More informationWhen fluid incompressible...flow velocity, volumetric, and mass flow are proportional.
11-1 Flow 11-1 Measures of Fluid Flow Flow velocity. Speed of material flowing past a plane. Volumetric flow. Volume of material passing a plane per unit time. Mass flow. Mass of material passing a plane
More informationDescribe Coriolis Mass Flowmeters
Training Module Human Development HDC Human Development All rights reserved. No part of this publication may be copied, reproduced, stored in a computer or retrieval system, published, distributed, or
More informationME332 FLUID MECHANICS LABORATORY (PART I)
ME332 FLUID MECHANICS LABORATORY (PART I) Mihir Sen Department of Aerospace and Mechanical Engineering University of Notre Dame Notre Dame, IN 46556 Version: January 14, 2002 Contents Unit 1: Hydrostatics
More informationALASTAIR MCLACHLAN Applications Cameron
ALASTAIR MCLACHLAN Applications Cameron Have worked in the oil and gas flow measurement industry for 27 years primarily in custody transfer measurement using ultrasonic meters. Joined Cameron Caldon Ultrasonics
More informationIndustrial Instrumentation Prof. A. Barua Department of Electrical Engineering Indian Institute of Technology Kharagpur. Lecture - 14 Flowmeter ΙΙΙ
Industrial Instrumentation Prof. A. Barua Department of Electrical Engineering Indian Institute of Technology Kharagpur Lecture - 14 Flowmeter ΙΙΙ Welcome to lesson 14 of Industrial Instrumentation. In
More informationMCE380: Measurements and Instrumentation Lab
MCE380: Measurements and Instrumentation Lab Chapter 8: Flow Measurements Topics: Basic Flow Equations Flow Obstruction Meters Positive Displacement Flowmeters Other Methods Holman, Ch. 7 Cleveland State
More informationtekcor TKC Multivariable Coriolis Flow Sensors
Sensing the pulse of industry Technical Data Sheet & General Specifications tekcor TKC Multivariable Coriolis Flow Sensors The tekcor TKC Series principle was initiated by tekflo sensors engineers, who
More informationFE Fluids Review March 23, 2012 Steve Burian (Civil & Environmental Engineering)
Topic: Fluid Properties 1. If 6 m 3 of oil weighs 47 kn, calculate its specific weight, density, and specific gravity. 2. 10.0 L of an incompressible liquid exert a force of 20 N at the earth s surface.
More information(ADVANCED) FLOW MEASUREMENTS Dr. János VAD, associate professor, Dept. Fluid Mechanics, BME
(ADVANCED) FLOW MEASUREMENTS Dr. János VAD, associate professor, Dept. Fluid Mechanics, BME Vad, J. (2008), Advanced flow measurements. Mőegyetemi Kiadó, 45085. Interactive presentations ( PREMIUM SCORES
More informationApplicable Fluid. Accuracy. Flow Rate Range. Fluid Temperature. Fluid Viscosity. Connection Size. Flange Rating. Housing. Material. Blade.
TOKICO TURINE METER GS-F211E- Overview Turbine meter has an excellent performance with its distinctive structure. Comparing with the flow meter using other method, it has compact and lighter design and
More informationFLOWMETRY FLOWMETRY. FLUID-FLOW MEASUREMENT AND VISUALISATION
FLOWMETRY Flowmetry. Fluid-flow measurement and visualisation... 1 Measuring mass flow-rate... 2 Accumulative weighting... 3 Thermal mass flow-meter... 3 Coriolis flowmeter... 3 Choked flow... 4 Measuring
More informationDELTA FLOWMETER FOR GAS SERVICE (INSERTION TYPE) MODEL VF SERIES
DETA FOWMETER FOR GAS SERVICE (INSERTION TYPE) MODE VF SERIES GENERA SPECIFICATION GS. No. GBD0-0-E GENERA In the thermistor type Delta meter, a probe inserted in the pipeline detects the representative
More informationINDUSTRIAL RESOURCES, INC. Power Plant Fundamentals Training
INDUSTRIAL RESOURCES, INC Power Plant Fundamentals Training Module 2 Power Plant Theory Power Plant Fundamentals Training This program is designed to provide you with a fundamental understanding of power
More informationGiven Find Water Properties
Venturi Example Given: A venturi is to be used to measure a 50 gpm flow of 70 F water in a 4-in ID pipe. Find: Select a throat diameter that provides Re d > 00,000 in the throat, and determine what differential
More informationIndustrial Instrumentation Prof. A. Barua Department of Electrical Engineering Indian Institute of Technology Kharagpur. Lecture - 13 Flowmeter - II
Industrial Instrumentation Prof. A. Barua Department of Electrical Engineering Indian Institute of Technology Kharagpur Lecture - 13 Flowmeter - II Welcome to the lesson 13 of Industrial Instrumentation.
More informationTS02 - Pre-Instructional Survey
TS02 - Pre-Instructional Survey 1. Which type of drawing provides detailed piping and process information, including wire terminations? a. Loop Wiring Diagrams b. Piping and Instrument Diagrams (P&IDs)
More informationDischarge measurements
Discharge measurements DISCHARGE MEASUREMENTS Suitability of methods and equipment for measurements where, under what conditions and for what reason discharge is measured determination of discharge in
More informationINSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad AERONAUTICAL ENGINEERING QUESTION BANK : AERONAUTICAL ENGINEERING.
Course Name Course Code Class Branch INSTITUTE OF AERONAUTICAL ENGINEERING Dundigal, Hyderabad - 00 0 AERONAUTICAL ENGINEERING : Mechanics of Fluids : A00 : II-I- B. Tech Year : 0 0 Course Coordinator
More informationRocky Mountain Measurement Seminar Denver August 20, 2015 Coriolis Meters
Cover graphic should fill and not exceed the defined grey box. Rocky Mountain Measurement Seminar Denver August 20, 2015 Coriolis Meters Sales Talks from the Early Years New Religion All our worries are
More information5 ENERGY EQUATION OF FLUID MOTION
5 ENERGY EQUATION OF FLUID MOTION 5.1 Introduction In order to develop the equations that describe a flow, it is assumed that fluids are subject to certain fundamental laws of physics. The pertinent laws
More informationThe Consumer Guide to Magnetic Flowmeters
The Consumer Guide to Magnetic Flowmeters Seminar Presented by David W. Spitzer Spitzer and Boyes, LLC +1.845.623.1830 Copyright This document may be viewed and printed for personal use only. No part of
More informationGiven Find Water Properties
Venturi Example Given: A venturi is to be used to measure a 50 gpm flow of 70 F water in a 4-in ID pipe. Find: Select a throat diameter that provides Re d > 00,000 in the throat, and determine what differential
More informationNUMERICAL ANALYSES OF ELECTROMAGNETIC FIELDS IN HIGH VOLTAGE BUSHING AND IN ELECTROMAGNETIC FLOW METER
Intensive Programme Renewable Energy Sources May 2011, Železná Ruda-Špičák, University of West Bohemia, Czech Republic NUMERICAL ANALYSES OF ELECTROMAGNETIC FIELDS IN HIGH VOLTAGE BUSHING AND IN ELECTROMAGNETIC
More informationFrom Flowmeter to Advanced Process Analyzer
A3. From Flowmeter to Advanced Process Analyzer Daniel Schrag,3 ; Kai Hencken ; Andrea Andenna ; Detlef Pape ; Harald Grothey 2 ABB Switzerland Ltd. AG, Dättwil, Switzerland 2 ABB Automation Products GmbH,
More informationVortex Flow Meters. RVL Series Vortex Flow Meter
TM Vortex Meters RVL Series Vortex Meter pplications: Water/Wastewater I Water: Semiconductor, Institutional I Water Skids Semiconductor Equipment Slurry hemical Processing RINE FEERTE IN. ISO 900 : 000
More informationfirst law of ThermodyNamics
first law of ThermodyNamics First law of thermodynamics - Principle of conservation of energy - Energy can be neither created nor destroyed Basic statement When any closed system is taken through a cycle,
More informationChapter 4 DYNAMICS OF FLUID FLOW
Faculty Of Engineering at Shobra nd Year Civil - 016 Chapter 4 DYNAMICS OF FLUID FLOW 4-1 Types of Energy 4- Euler s Equation 4-3 Bernoulli s Equation 4-4 Total Energy Line (TEL) and Hydraulic Grade Line
More informationTurbine Meter TRZ 03 PRODUCT INFORMATION. Reliable Measurement of Gas
Turbine Meter TRZ 0 PRODUCT INFORMATION Reliable Measurement of Gas TURBINE METER TRZ 0 Method of operation, Construction Method of operation The TRZ 0 turbine meter is a flow meter suitable for gas measurement
More informationExperiment (4): Flow measurement
Experiment (4): Flow measurement Introduction: The flow measuring apparatus is used to familiarize the students with typical methods of flow measurement of an incompressible fluid and, at the same time
More informationSENSORS AND TRANSDUCERS
Electrical Measurements International Program Department of Electrical Engineering UNIVERSITAS INDONESIA ANDRITTO ABDUL GHAFFAR ANDHIKA ADIEL INSANI Lecturer : Ir. Chairul Hudaya, ST, M.Eng., Ph.D., IPM
More informationSECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
More informationLinearity of Coriolis Flowmeters at Full Scale Value. Dr. Jesús Aguilera - Endress + Hauser Paul Ceglia - Endress + Hauser
Linearity of Coriolis Flowmeters at Full Scale Value Dr. Jesús Aguilera - Endress + Hauser Paul Ceglia - Endress + Hauser Products Solutions Services Linearity of Coriolis flowmeters at full scale value
More informationBen Wolfe 11/3/14. Figure 1: Theoretical diagram showing the each step of heat loss.
Condenser Analysis Water Cooled Model: For this condenser design there will be a coil of stainless steel tubing suspended in a bath of cold water. The cold water will be stationary and begin at an ambient
More informationLaboratory exercise 1: Open channel flow measurement
Chapter 1 Laboratory exercise 1: Open channel flow measurement Laboratory exercise Open channel flow measurement is placed on the Faculty of Civil and Geodetic Engineering, on Department of Environmental
More informationSEM-2017(03HI MECHANICAL ENGINEERING. Paper II. Please read each of the following instructions carefully before attempting questions.
We RoU No. 700095 Candidate should write his/her Roll No. here. Total No. of Questions : 7 No. of Printed Pages : 7 SEM-2017(03HI MECHANICAL ENGINEERING Paper II Time ; 3 Hours ] [ Total Marks : 0 Instructions
More information