GOT meeting Port Plug Engineering

Transcription

1 GOT meeting Port Plug Engineering WP1:Nuclear Requirements in different phases from theengineering design to decommissioning Trainee: Supervisor: Miguel Dapena Febrer Sophie Salasca 1 Index 1. Training activities in Communications 4. Future activities and planning 2

2 1. Training activities 2010 ANSYS Workbench and nonlinear applications Supervision Diploma Student Secondment at KIT April April October 3 days 6 months 2 months RCC-MR code December 2 days ESPN final document 2.2 Update HRNS collimator study 2.3 Supervision Diploma student 2.4 Visible/Infrared Wide Angle camera 2.5 Shielding block of TBM HCPB at KIT 4

3 2.1 ESPN final document Legal base of the classification as «out of the scope of ESP» Decree No dated 13th December 1999 concerning pressure equipment Article 2 Amended by Decree No dated 2November 2007 Article 61 (JORF 3 November 2007) II. The pressure equipment defined below are not subject to the provisions of Parts II and III of this decree: h) Equipment involving casings or mechanisms for which the size, choice of materials and construction rules mainly depend on criteria of strength, rigidity and stability in terms of operating static and dynamic loads or in terms of other characteristics related to their operation and for which the pressure does not represent a significant design factor. Such equipment can include: Engines, including turbines and internal combustion engines; Steam machines, gas or steam turbines, turbine generators and compressors; Pumps and actuators; ESPN final document 6

4 2.1 ESPN final document Update HRNS collimator study High Resolution Neutron Spectrometer system Detectors Bioshield Interspace collimator Port Plug 8

5 2.2 Update HRNS collimator study 3. Geometry analyses 1E-9 1E-10 1E-11 1E-12 1E-13 1E-9 1E-10 1E-11 1E-12 1E-13 cylinder cone (GeoRef) cone comparison xgc1 10cm 0.5deg xgc2 10cm 0.414deg xgc3 10cm 0.161deg xgc cm 1.61deg Conic channel provides: higher total flux (~3x) worse spectrum conservation capability Cone configurations: FW aperture has a high influence on the neutron total flux Half-angle angle has little influence on the total neutron flux Spectrum conservation capability is similar 4. Material analyses 1E-4 1E-5 1E-6 1E-9 1E-10 1E-11 1E-12 1E-10 1E-11 1E-12 1E-4 1E-5 1E-6 1E-9 1E-4 1E-5 1E-6 MatRef collimator input MatRef collimator output GeoRef collimator output concrete pipe collimator input concrete pipe collimator output full concrete collimator output MatRef collimator output 98% SS304B7+2% B 84% SS316LN+16% water 100% Concrete 86.8% Concrete+11.1% Pb+2.1% B MatRef The reference material configuration does not show major differences with the homogeneous model According to the material in the backend of the collimator: steels present good spectrum conservation capability concrete configurations produce characteristic distortion regions The material used in the frontend of the collimator acts as spectrum shaper: all steels present an identical input spectrum Supervision Diploma student Génie Atomique «Monte Carlo neutronic calculations into a line of sight of the Visible/Infrared diagnostic of ITER» Sarah Dastrevigne Activities as supervisor Preparation of the subject Recruitment process Training on ITER, TRIPOLI,MCNP, etc Guidance Evaluation of the work Output: Valuable work for neutron streaming evaluation and integration 10

6 2.4 Vis/IR Wide Angle camera 1. Preliminary mirror heating 2. Optimization of LOS 3. New drawer configuration 1E14 Upper Mirror Lower Mirror Neutron Flux (cm-2mev-1s-1) 1E13 1E12 1E11 1E Neutron spectrum arriving to the mirrors a) Total and b) fast neutron flux around the mirrors Neutron flux [n/cm²] Normalized F2 flux 1.E+01 EFDA task REF 1.E-01 Drawer study 1.E-03 1.E-05 1.E-07 1.E Distance to FW [cm] Shielding block of TBM HCPB at KIT Parametric study Gap Shielding-frame Beginning of backplate F/F Total fast Thermal Original Mid-closed Closed Gap position 12

7 2.5 Shielding block of TBM HCPB at KIT Parametric study Shielding block material Beginning of backplate errors F0 (8.06%Thermal, 7.16% Fast, 3.56% Total) Variation F/F ² Total flux Fast flux Thermal Flux % steel content Communications Etudes neutroniques et sûreté pour le Port Plug Equatorial #1 Preliminary neutronic analyses of ITER High Resolution Neutron Spectrometer Collimator Recent technical advancements of the ITER Equatorial Visible/InfraRed Diagnostic Neutronic Calculations in support of the design of ITER High Resolution Neutron Spectrometer Monte Carlo neutronics calculations into a line of sight of the Visible/Infra-Red diagnostic of ITER Journée des Trainees, Cadarach, May th Soft Conference, Porto 26th Soft Conference, Porto 26th Soft Conference, Porto CEA Internal Report, PEFC/NTT (2010) M. Dapena M. Dapena, L. Petrizzi, F. Moro S. Salasca, H. Arnichand, G. Belhabib, M. Dapena, S. Dastrevigne, C. Dechelle, V. Legrand F. Moro, B. Esposito, D Marocco, R. Villari, L. Petrizzi, E. Andersson Sunden, S. Conroy, G. Ericsson, M. Gatu Johnson, M. Dapena S. Dastrevigne, M. Dapena, 14

8 4. Future activities and planning Activities foreseen in 2011 Collaboration on upcoming VIS/IR studies (first half 2011) Preparation of Seminars (Jan-Feb) Neutronics Postulated Initiating Events Training activities (Second half 2011) Management Activation and Rigurous2Step method calculations Conference ISFNT (September) Paper contribution Future activities and planning Skills acquired so far 16

9 Thank you for the attention 17