Operator manual. Simrad ITI Trawl instrumentation system
|
|
|
- Dwayne Austin
- 5 years ago
- Views:
Transcription
1 Operator manual Simrad ITI Trawl instrumentation system
2
3 Simrad ITI Trawl Instrumentation System Base version / AA000
4 Operator manual Note Simrad AS makes every effort to ensure that the information contained within this document is correct. However, our equipment is continuously being improved and updated, so we cannot assume liability for any errors which may occur. Warning The equipment to which this manual applies must only be used for the purpose for which it was designed. Improper use or maintenance may cause damage to the equipment or injury to personnel. The user must be familiar with the contents of the appropriate manuals before attempting to operate or work on the equipment. Simrad AS disclaims any responsibility for damage or injury caused by improper installation, use or maintenance of the equipment. Copyright 2002 Simrad AS The information contained within this document remains the sole property of Simrad AS. No part of this document may be copied or reproduced in any form or by any means, and the information contained within is not to be communicated to a third party, without the prior written consent of Simrad AS. Simrad AS Strandpromenaden 50 Boks Horten Telephone: Facsimile: Internet: A L W A Y S A T T H E F O R E F R O N T O F T E C H N O L O G Y D 1
5 Cover and Contents Sections 1 System familiarization This section defines and describes the main system units, and presents a brief theory of operation. 2 Operational procedures This section presents the most common procedures to cover the normal day- to- day operations. 3 Screen presentation modes This section describes the various operational modes and the information found on the display. 4 Command references This section describes each command and option in detail. The document is intended for reference purposes only. 5 ITI sensors This section describes the sensors used with the ITI system. The description includes charging procedures and technical specifications. 6 On -board maintenance This section describes the preventive and corrective maintenance actions to be performed by the ITI operator on board the vessel. 7 ITI Ethernet This section describes the Ethernet commands. 8 Technical specifications This section lists the main technical specifications of the Simrad ITI system. P2212D I
6 Simrad ITI Base version Remarks References Further information about the ITI system may be found in the following manual: ITI Installation Manual, P2257. The reader This operator manual is intended to be used by the system operator. He/she should be experienced in the operation of positioning systems, or should have attended a Simrad training course. Note This manual includes sections that may be revised individually. In the event of a revision to any part of this manual, this Cover and Contents section will be replaced. II P2212D
7 Cover and Contents Document revisions Rev Written by Checked by Approved by Date Sign Date Sign Date Sign A... B C NB KEG TAL D CL EPB KEG E F G H The original signatures are recorded on the company s logistic data system. P2212D III
8 Simrad ITI Base version Documents Simrad References (The information on this page is intended for Simrad s internal use) Sect Title Loc. File P.no/Rev 0 Cover and contents AA P2212D 1 System familiarization 4AA P3054/A 2 Operational procedures 4A P3053/A 3 Screen presentation modes 4A P3055/A 4 Command references 4A P3052/A 5 ITI sensors 4A P3057/A 6 On--board maintenance 4A P3056/A 7 ITI Ethernet 4A P3454/A 8 Technical specifications 4A P3058/A Revisions Rev. A First edition Rev. B Second edition Rev. C New software version 2.12 Rev. D Manual updated to reflect new software version At the same time Simrad s new documentation standard has been implemented. To assist us in making improvements to the product and to this manual, we would welcome comments and constructive criticism. Please send all such - in writing or by - to: Simrad AS Documentation Department P.O.Box 111 N-3191 Horten Norway or simrad.documentation@simrad.com IV P2212D
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201 Simrad ITI Operator manual Simrad ITI Operator manual Simrad ITI Operator manual Simrad ITI Operator manual
202
BOUNDARY MAP USER GUIDE
BOUNDARY MAP USER GUIDE Get Exploring. Boundaries. The Northern Ontario Boundary Map provides users with the ability to explore the many community, administrative and service provider boundaries in the
MiSeq System. Denature and Dilute Libraries Guide
MiSeq System Denature and Dilute Libraries Guide Overview 3 Protocol A: Standard Normalization Method 4 Protocol B: Bead-Based Normalization Method 6 Denature and Dilute PhiX Control 7 Supplemental Information
Installation guide 862 MIT / MIR
Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100
Esterification in a PFR with Aspen Plus V8.0
Esterification in a PFR with Aspen Plus V8.0 1. Lesson Objectives Use Aspen Plus to determine whether a given reaction is technically feasible using a plug flow reactor. 2. Prerequisites Aspen Plus V8.0
PAID INVOICE TAX REPORT
PAID INVOICE TAX REPORT The documentation in this publication is provided pursuant to a Sales and Licensing Contract for the Prophet 21 System entered into by and between Prophet 21 and the Purchaser to
Digital Mapping License Agreement
City of Des Moines, Iowa GIS Division, Information Technology Department Digital Mapping License Agreement PURPOSE AND NATURE OF THE AGREEMENT This Digital Mapping License Agreement ("Agreement") is executed
Daily Forecast and Actual Load Report by Local Resource Zone. Readers' Guide. Last Updated: 15 January 2015 Version: 3.1
Daily Forecast and Actual Load Report by Local Resource Zone. Readers' Guide Last Updated: 15 January 2015 Version: 3.1 Table of Contents TABLE OF FIGURES... 2 1 DISCLAIMER... 3 2 INTRODUCTION... 3 3 GLOSSARY...
Compact Orifice FlowMeter
Steam Data Reference Tables IM/OM/SDT Issue 1 Compact Orifice FlowMeter ABB The Company We are an established world force in the design and manufacture of instrumentation for industrial process control,
N) manual. Biomaster Operating manual
830 ual N) manual Operating manual Copyright 2013 Eppendorf AG, Hamburg. No part of this publication may be reproduced without the prior permission of the copyright owner. Trademarks Eppendorf and the
EXPENDITURE SAMPLES AND FUNDS REQUEST FORM
Appendix E EXPENDITURE SAMPLES AND FUNDS REQUEST FORM Allowable Expenditures There are several restrictions on the use of SBAP funds: They must be used within the special education program; They may not
SOUTHEAST TEXAS CONTINUING EDUCATION HIGH TEMPERATURE WATER HEATING SYSTEMS
EXAM No. 151 HIGH TEMPERATURE WATER HEATING SYSTEMS 1. Due to pressure limitations on pipe and fittings, equipment, and accessories, what is the practical temperature limit of circulating water in district
WeatherHub2 Quick Start Guide
WeatherHub2 Quick Start Guide Table of Contents 1 Introduction... 1 2 Packing List... 1 3 Connections... 1 4 IP Addressing... 2 5 Browser Access... 3 6 System Info... 3 7 Weather Station Settings... 4
Esterification in CSTRs in Series with Aspen Plus V8.0
Esterification in CSTRs in Series with Aspen Plus V8.0 1. Lesson Objectives Use Aspen Plus to determine whether a given reaction is technically feasible using three continuous stirred tank reactors in
August TLE500x TLE501x. GMR-Based Angular Sensor. Application Note GMR Angle Error Extension V 1.2. Sensors
August 2011 TLE500x TLE501x GMR-Based Angular Sensor Application Note V 1.2 Sensors Edition 2011-08-03 Published by Infineon Technologies AG 81726 München, Germany 2007 Infineon Technologies AG All Rights
Health, Safety, Security and Environment
Document owner and change code Document Owner Aaron Perronne Title HSSE Manager Mark X Change Code Description X N/A First Issue A Typographical/Grammatical correction; formatting change; text clarification-no
NOVALYNX CORPORATION MODEL 110-WS-16BP BAROMETRIC PRESSURE SENSOR INSTRUCTION MANUAL
NOVALYNX CORPORATION MODEL 110-WS-16BP BAROMETRIC PRESSURE SENSOR INSTRUCTION MANUAL REVISION DATE: OCT 2005 Receiving and Unpacking Carefully unpack all components and compare to the packing list. Notify
ISO INTERNATIONAL STANDARD. Geographic information Spatial referencing by coordinates Part 2: Extension for parametric values
INTERNATIONAL STANDARD ISO 19111-2 First edition 2009-08-15 Geographic information Spatial referencing by coordinates Part 2: Extension for parametric values Information géographique Système de références
Reagent Preparation Guide (for the Genome Analyzer)
TruSeq SBS Kit v5 Reagent Preparation Guide (for the Genome Analyzer) FOR RESEARCH USE ONLY Introduction 3 TruSeq SBS Kit v5 4 Preparing SBS Reagents 5 Reagent Kits and Replenishing Cycles 8 Technical
74HC1GU04GV. 1. General description. 2. Features. 3. Ordering information. Marking. 5. Functional diagram. Inverter
Rev. 5 1 July 27 Product data sheet 1. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. It provides an inverting single stage function. The standard output
Pressure Swing Distillation with Aspen Plus V8.0
Pressure Swing Distillation with Aspen Plus V8.0 1. Lesson Objectives Aspen Plus property analysis RadFrac distillation modeling Design Specs NQ Curves Tear streams Understand and overcome azeotrope Select
74HC1G02; 74HCT1G02. The standard output currents are half those of the 74HC02 and 74HCT02.
Rev. 04 11 July 2007 Product data sheet 1. General description 2. Features 3. Ordering information 74HC1G02 and 74HCT1G02 are high speed Si-gate CMOS devices. They provide a 2-input NOR function. The HC
SAFETY TRAINING LEAFLET 08 ACETYLENE, CALCIUM CARBIDE, LIME SLUDGE AND PURIFYING MATERIALS
SAFETY TRAINING LEAFLET 08 ACETYLENE, CALCIUM CARBIDE, LIME SLUDGE AND PURIFYING MATERIALS Doc 23.08/18 EUROPEAN INDUSTRIAL GASES ASSOCIATION AISBL AVENUE DES ARTS 3-5 B 1210 BRUSSELS Tel: +32 2 217 70
ISO 1871 INTERNATIONAL STANDARD. Food and feed products General guidelines for the determination of nitrogen by the Kjeldahl method
INTERNATIONAL STANDARD ISO 1871 Second edition 2009-09-01 Food and feed products General guidelines for the determination of nitrogen by the Kjeldahl method Produits alimentaires et aliments des animaux
ISSP User Guide CY3207ISSP. Revision C
CY3207ISSP ISSP User Guide Revision C Cypress Semiconductor 198 Champion Court San Jose, CA 95134-1709 Phone (USA): 800.858.1810 Phone (Intnl): 408.943.2600 http://www.cypress.com Copyrights Copyrights
ISO 3497 INTERNATIONAL STANDARD. Metallic coatings Measurement of coating thickness X-ray spectrometric methods
INTERNATIONAL STANDARD ISO 3497 Third edition 2000-12-15 Metallic coatings Measurement of coating thickness X-ray spectrometric methods Revêtements métalliques Mesurage de l'épaisseur du revêtement Méthodes
74HC1G86; 74HCT1G86. 2-input EXCLUSIVE-OR gate. The standard output currents are half those of the 74HC/HCT86.
Rev. 04 20 July 2007 Product data sheet 1. General description 2. Features 3. Ordering information 74HC1G86 and 74HCT1G86 are high-speed Si-gate CMOS devices. They provide a 2-input EXCLUSIVE-OR function.
ISO INTERNATIONAL STANDARD. Sample preparation Dispersing procedures for powders in liquids
INTERNATIONAL STANDARD ISO 14887 First edition 2000-09-01 Sample preparation Dispersing procedures for powders in liquids Préparation de l'échantillon Procédures pour la dispersion des poudres dans les
Presco AG. Standard Air Capacitor 10 nf / 2 kv. Type CL-0N10-K201. User's manual
Zürcherstrasse 70 -CH 8104 Weiningen Tel. + 41 44 750 63 63 Fax + 41 44 750 63 66 P.O. Box 155 Switzerland Email info@prescoag.com Internet : www.prescoag.com Standard Air Capacitor 10 nf / 2 kv Type CL-0N10-K201
Geomap Downloading and changes in New Version
1 Geomap Downloading and changes in New Version 1.9.10.0 14 June 2014 William O'Connor and Udo Kaschner about-us.html 2 Published by: William O'Connor PO Box 2207 Clarkson Western Australia http://www.gold-prospecting-wa.com
ISO INTERNATIONAL STANDARD. Geographic information Metadata Part 2: Extensions for imagery and gridded data
INTERNATIONAL STANDARD ISO 19115-2 First edition 2009-02-15 Geographic information Metadata Part 2: Extensions for imagery and gridded data Information géographique Métadonnées Partie 2: Extensions pour
Accountability. User Guide
Accountability User Guide The information in this document is subject to change without notice and does not represent a commitment on the part of Horizon. The software described in this document is furnished
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Pin 1 Pin 3 Pin 5 Pin 4 n.c.
TVS (transient voltage suppressor) Bi/uni-directional, 3.3 V, 2 pf, RoHS and halogen free compliant Feature list ESD/Transient/Surge protection according to: - IEC61-4-2 (ESD): ±3 kv (air/contact discharge)
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 217 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
O P E R A T I N G M A N U A L
OPERATING MANUAL WeatherJack OPERATING MANUAL 1-800-645-1061 The baud rate is 2400 ( 8 bits, 1 stop bit, no parity. Flow control = none) To make sure the unit is on line, send an X. the machine will respond
Eppendorf BioSpectrometer 6135/6136/6137
nal Spectrometer Qualification 6135/6136/6137 - English N) rational Qualification - English Register your instrument! www.eppendorf.com/myeppendorf Eppendorf BioSpectrometer 6135/6136/6137 SOP - Operational
WeatherHawk Weather Station Protocol
WeatherHawk Weather Station Protocol Purpose To log atmosphere data using a WeatherHawk TM weather station Overview A weather station is setup to measure and record atmospheric measurements at 15 minute
Overlay Transport Virtualization (OTV) Unicast-Mode Transport Infrastructure Deployment
Overlay Transport Virtualization (OTV) Unicast-Mode Transport Infrastructure Deployment July 24, 2012 ALL DESIGNS, SPECIFICATIONS, STATEMENTS, INFORMATION, AND RECOMMENDATIONS (COLLECTIVELY, "DESIGNS")
StormReady Supporter Application Form updated by NWS Chanhassen on April 7, Name of Applying Entity: Point of Contact: Title:
NATIONAL WEATHER SERVICE 1733 Lake Drive West Chanhassen, Minnesota www.weather.gov/twincities www.stormready.noaa.gov 952-361-6671, todd.krause@noaa.gov StormReady Supporter Application Form updated by
Lamp and Control Panel (Lamp Panel)
www.reinhausen.com Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve
AN3002 Thermocouple measurement
AN3002 Thermocouple measurement This application note illustrates the correct measurement of thermocouple sensors. Contents 1 Introduction......................................... 3 2 Test configuration....................................
ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION
Rev D1, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC none ic-wg BLCC WGC ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR A/B, d 44mm
Part 14: Water quality Sampling. Guidance on quality assurance and quality control of environmental water sampling and handling
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 5667-14 Second edition 2014-12-15 Water quality Sampling Part 14: Guidance on quality assurance and quality control of environmental water sampling
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8008 Second edition 2005-10-15 Aluminium oxide primarily used for the production of aluminium Determination of specific surface area by nitrogen adsorption Oxyde d'aluminium
ISO 6530 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6530 Third edition 2005-02-01 Protective clothing Protection against liquid chemicals Test method for resistance of materials to penetration by liquids Vêtements de protection
QUANTUM CONCEPT. Swimming User s Manual
QUANTUM CONCEPT Swimming User s Manual 480.508.0 Version.4 Edition July 05 Documentation Updates Swiss Timing Ltd. reserves the right to make improvements in the products described in this documentation
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 2017 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 17710 First edition 2002-05-15 Plastics Polyols for use in the production of polyurethane Determination of degree of unsaturation by microtitration Plastiques Polyols pour la
2-input AND gate with open-drain output. The 74AHC1G09 is a high-speed Si-gate CMOS device.
74HC1G09 Rev. 02 18 December 2007 Product data sheet 1. General description 2. Features 3. Ordering information The 74HC1G09 is a high-speed Si-gate CMOS device. The 74HC1G09 provides the 2-input ND function
Centralized Forecasting Registration and Communication Requirements for Distribution Connected Variable Generators. IESO Training
Centralized Forecasting Registration and Communication Requirements for Distribution Connected Variable Generators IESO Training May 2017 Centralized Forecasting - Registration and Communication Requirements
Contents. Feature Articles. On the Web. Resources. A Publication for ANSYS Users
Contents Contents Feature Articles ANSYS Thermal: Getting the Heat Flow from Convection BCs Benchmarking ANSYS 6.1 on HP Systems CADfix On the Web New in ANSYS 6.1 PADT Seminar: Multiphysics Analysis PADT
ISO 8988 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8988 Third edition 2006-09-01 Plastics Phenolic resins Determination of hexamethylenetetramine content Kjeldahl method, perchloric acid method and hydrochloric acid method Plastiques
Temperature range Name Description Version XC7SET32GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.
Rev. 01 3 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input OR function. Symmetrical output impedance
Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM
User's Guide SLPU007 December 07 Ultra-Small Footprint N-Channel FemtoFET MOSFET Test EVM Contents Introduction... Description... Electrical Performance Specifications... 4 Schematic... 4 Test Setup....
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 2871-1 Second edition 2010-02-15 Surface active agents Detergents Determination of cationic-active matter content Part 1: High-molecular-mass cationic-active matter Agents de
Dual N-channel field-effect transistor. Two N-channel symmetrical junction field-effect transistors in a SOT363 package.
Rev. 2 15 September 211 Product data sheet 1. Product profile 1.1 General description Two N-channel symmetrical junction field-effect transistors in a SOT363 package. CAUTION This device is sensitive to
2-input EXCLUSIVE-OR gate
Rev. 01 7 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input EXCLUSIVE-OR function. Symmetrical output
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 2871-2 Second edition 2010-02-15 Surface active agents Detergents Determination of cationic-active matter content Part 2: Cationic-active matter of low molecular mass (between
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
Turbines and turbine sets Measurement of emitted airborne noise Engineering/survey method
INTERNATIONAL STANDARD ISO 10494 Second edition 2018-04 Turbines and turbine sets Measurement of emitted airborne noise Engineering/survey method Turbines et groupes de turbines Mesurage du bruit aérien
APPLICATION FOR AUTHORIZATION
INSTRUCTIONS: This form is intended to be a template for completion by the applicant, followed by subsequent review by the Radiation Safety Officer, and then the Radiation Safety Committee. Please fill
ISO 2575 INTERNATIONAL STANDARD. Road vehicles Symbols for controls, indicators and tell-tales
INTERNATIONAL STANDARD ISO 2575 Eighth edition 2010-07-01 Road vehicles Symbols for controls, indicators and tell-tales Véhicules routiers Symboles pour les commandes, indicateurs et témoins Reference
74HC2G16; 74HCT2G16. The 74HC2G16; 74HCT2G16 is a high-speed Si-gate CMOS device. The 74HC2G16; 74HCT2G16 provides two buffers.
Rev. 1 2 November 2015 Product data sheet 1. General description The is a high-speed Si-gate CMOS device. The provides two buffers. 2. Features and benefits 3. Ordering information Wide supply voltage
Hazard Communication Program
Hazard Communication Program The Meriden Board of Education school district is complying with the requirements of OSHA's Hazard Communication Standard for construction by compiling a list of hazardous
The 74LV08 provides a quad 2-input AND function.
Quad 2-input ND gate Rev. 03 6 pril 2009 Product data sheet. General description 2. Features 3. Ordering information The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC0
N-channel TrenchMOS standard level FET. Higher operating power due to low thermal resistance Low conduction losses due to low on-state resistance
Rev. 2 3 February 29 Product data sheet 1. Product profile 1.1 General description Standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology.
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10703 Second edition 2007-11-15 Water quality Determination of the activity concentration of radionuclides Method by high resolution gamma-ray spectrometry Qualité de l'eau Détermination
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13318-2 Second edition 2007-09-15 Determination of particle size distribution by centrifugal liquid sedimentation methods Part 2: Photocentrifuge method Détermination de la distribution
Commercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
ISO INTERNATIONAL STANDARD. Indoor air Part 2: Sampling strategy for formaldehyde
INTERNATIONAL STANDARD ISO 16000-2 First edition 2004-07-01 Indoor air Part 2: Sampling strategy for formaldehyde Air intérieur Partie 2: Stratégie d'échantillonnage du formaldéhyde Reference number ISO
ISO 385 INTERNATIONAL STANDARD. Laboratory glassware Burettes. Verrerie de laboratoire Burettes. First edition
INTERNATIONAL STANDARD ISO 385 First edition 2005-04-15 Laboratory glassware Burettes Verrerie de laboratoire Burettes Reference number ISO 385:2005(E) ISO 2005 PDF disclaimer This PDF file may contain
Electrical safety testing Checklist
ety al Check testing Check - Checklist EN) ctrical Electrical safety testing Checklist SOP - Electrical Check Copyright 2013 Eppendorf AG. All rights reserved, including graphics and images. No part of
Troubleshooting Replication and Geodata Services. Liz Parrish & Ben Lin
Troubleshooting Replication and Geodata Services Liz Parrish & Ben Lin AGENDA: Troubleshooting Replication and Geodata Services Overview Demo Troubleshooting Q & A Overview of Replication Liz Parrish What
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6980-3 First edition 2006-10-01 Nuclear energy Reference beta-particle radiation Part 3: Calibration of area and personal dosemeters and the determination of their response as
Internal Audit Report
Internal Audit Report Right of Way Mapping TxDOT Internal Audit Division Objective To determine the efficiency and effectiveness of district mapping procedures. Opinion Based on the audit scope areas reviewed,
74HC30; 74HCT General description. 2. Features and benefits. 3. Ordering information. 8-input NAND gate
Rev. 7 2 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an. Inputs include clamp diodes. This enables the use of current limiting resistors
74AHC1G00; 74AHCT1G00
74HC1G00; 74HCT1G00 Rev. 06 30 May 2007 Product data sheet 1. General description 2. Features 3. Ordering information 74HC1G00 and 74HCT1G00 are high-speed Si-gate CMOS devices. They provide a 2-input
ISO INTERNATIONAL STANDARD. Methods for the petrographic analysis of coals Part 2: Methods of preparing coal samples
INTERNATIONAL STANDARD ISO 7404-2 Second edition 2009-10-01 Methods for the petrographic analysis of coals Part 2: Methods of preparing coal samples Méthodes d'analyse pétrographique des charbons Partie
N-channel TrenchMOS logic level FET
Rev. 2 3 November 29 Product data sheet 1. Product profile 1.1 General description Logic level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology.
AS/NZS ISO :2015
Australian/New Zealand Standard Geographic information Reference model Part 1: Fundamentals Superseding AS/NZS ISO 19101:2003 AS/NZS ISO 19101.1:2015 (ISO 19101-1:2014, IDT) AS/NZS ISO 19101.1:2015 This
The 74LV32 provides a quad 2-input OR function.
Rev. 03 9 November 2007 Product data sheet. General description 2. Features 3. Ordering information The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC32 and 74HCT32.
ic-wg BLCC WGC OPTO ENCODER PACKAGE SPECIFICATION
Rev E2, Page 1/5 ORDERING INFORMATION Type Package Options Order Designation ic-wg BLCC WGC Glass Lid ic-wg BLCC WGC-WG1L ic-wg BLCC WGC reticle ic-wg BLCC WGC-WG1R WG1R Code Disc 13bit-Gray +2048 PPR
PSMN B. N-channel TrenchMOS SiliconMAX standard level FET. High frequency computer motherboard DC-to-DC convertors
Rev. 2 6 July 29 Product data sheet 1. Product profile 1.1 General description SiliconMAX standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology.
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60758 Third edition 2004-12 Synthetic quartz crystal Specifications and guide to the use IEC 2004 Copyright - all rights reserved No part of this publication may be reproduced
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11704 First edition 2010-07-01 Water quality Measurement of gross alpha and beta activity concentration in non-saline water Liquid scintillation counting method Qualité de l'eau
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use the references to Nexperia, as shown below.
Important notice Dear Customer, On 7 February 27 the former NXP Standard Product business became a new company with the tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and
ISO/TR TECHNICAL REPORT. Determination of uncertainty for volume measurements made using the gravimetric method
TECHNICAL REPORT ISO/TR 20461 First edition 2000-11-01 Determination of uncertainty for volume measurements made using the gravimetric method Détermination de l'incertitude de mesure pour les mesurages
PSMN004-60B. N-channel TrenchMOS SiliconMAX standard level FET. High frequency computer motherboard DC-to-DC convertors
Rev. 2 15 December 29 Product data sheet 1. Product profile 1.1 General description SiliconMAX standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS
Dual rugged ultrafast rectifier diode, 20 A, 150 V. Ultrafast dual epitaxial rectifier diode in a SOT78 (TO-220AB) plastic package.
Rev. 04 2 March 2009 Product data sheet 1. Product profile 1.1 General description Ultrafast dual epitaxial rectifier diode in a SOT78 (TO-220AB) plastic package. 1.2 Features and benefits High reverse
74AHC02; 74AHCT02. The 74AHC02; 74AHCT02 provides a quad 2-input NOR function.
Rev. 04 2 May 2008 Product data sheet. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified
ISO INTERNATIONAL STANDARD. Geographic information Spatial referencing by coordinates
INTERNATIONAL STANDARD ISO 19111 Second edition 2007-07-01 Geographic information Spatial referencing by coordinates Information géographique Système de références spatiales par coordonnées Reference number
A compilation of key maintenance and performance articles taken from the former Lycoming Flyer Newsletter. Lycoming Flyer Key Reprints
A compilation of key maintenance and performance articles taken from the former Lycoming Flyer Newsletter Lycoming Flyer Key Reprints D e a r Lycoming Flyer C u s t o m e r, O u r K e y R e p r i n t
PHP110NQ08T. N-channel TrenchMOS standard level FET
Rev. 2 12 October 29 Product data sheet 1. Product profile 1.1 General description Standard level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology.
ISO INTERNATIONAL STANDARD. Thermal insulation for building equipment and industrial installations Calculation rules
INTERNATIONAL STANDARD ISO 12241 Second edition 2008-06-15 Thermal insulation for building equipment and industrial installations Calculation rules Isolation thermique des équipements de bâtiments et des
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 9276-6 First edition 2008-09-15 Representation of results of particle size analysis Part 6: Descriptive and quantitative representation of particle shape and morphology Représentation
SA/SNZ TS ISO :2015
(ISO/TS 19130-2:2014, IDT) Australian/New Zealand Technical Specification Geographic information Imagery sensor models for geopositioning Part 2: SAR, InSAR, lidar and sonar SA/SNZ TS ISO 19130.2:2015
ISO INTERNATIONAL STANDARD. Natural gas Determination of mercury Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
INTERNATIONAL STANDARD ISO 6978-2 First edition 2003-10-15 Natural gas Determination of mercury Part 2: Sampling of mercury by amalgamation on gold/platinum alloy Gaz naturel Détermination de la teneur
PostPoint Professional
PostPoint Professional 2014.02 PRODUCT GUIDE Information in this document is subject to change without notice and does not represent a commitment on the part of the vendor or its representatives. part
STANDARD OPERATING PROCEDURES
PAGE: 1 of 5 CONTENTS 1.0 SCOPE AND APPLICATION 2.0 METHOD SUMMARY 3.0 SAMPLE PRESERVATION, CONTAINERS, HANDLING, AND STORAGE 4.0 INTERFERENCE AND POTENTIAL PROBLEMS 5.0 EQUIPMENT/APPARATUS 6.0 REAGENTS
INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 13317-3 First edition 2001-03-01 Determination of particle size distribution by gravitational liquid sedimentation methods Part 3: X-ray gravitational