Photon Extraction: the key physics for approaching solar cell efficiency limits

Transcription

1 Photon Extraction: the key physics for approaching solar cell efficiency limits Owen Miller*: Post-doc, MIT Math Eli Yablonovitch: UC Berkeley, LBNL Slides/Codes/Relevant Papers: math.mit.edu/~odmiller/publications *Currently working with Steven

2 Cost of Eletricity ( /kwh) Value of High Photovoltaic Efficiency Efficiency and Cost of Electricity (COE) COE From Allen Barnett Univ. of Delaware inversely related: (Costmodule CostBOS ) Finance Operating Insolation Efficiency Factors that impact COE: Location: decides the available input energy Efficiency: decides the portion that can be converted to electricity % 8% 12% 18% 27% 40% Cost of Photovoltaics ($/m 2 ) 2

3 Which PV technology? Ask Shockley-Queisser Canonical method for fundamental limits solar cell = absorber absorber = emitter Shockley & Queisser J. Appl. Phys. 32, 510 (1961) internals = black-box (equilibrate rates through surface) constant quasi-fermi level separation (thermalization) Single-Junction Intermediate-Band Multi-Carrier Multi-Junction < 33.5% < 65% < 45% < 50% Many more: concentrating, hot-carrier, spectrum-splitting, nanowires, etc.

4 Fundamental limits should be General (few parameters) Shockley-Queisser Absolutely. In simplest case, bandgap only Robust A real system will never be perfect. But small imperfections in material/optics should yield small losses in performance. No! By hiding internals, important photon dynamics are obscured Two consequences: (a) For technology selection, need a modified SQ (b) To approach SQ: explicitly design for photon extraction

5 Fundamental limits should be General (few parameters) Shockley-Queisser Absolutely. In simplest case, bandgap only Robust A real system will never be perfect. But small imperfections in material/optics should yield small losses in performance. No! By hiding internals, important photon dynamics are obscured Two consequences: (a) For technology selection, need a modified SQ (b) To approach SQ: explicitly design for photon extraction

6 Open-Circuit Voltage Determines Operating-Point Voltage To extract current, voltage at contacts must be slightly lower than Voc But, operating voltage linked directly to Voc V OP V OC kt q ln qv kt OC We only need to understand the open-circuit voltage Any bad things that can happen, will happen. Can t extract the charges before, say, non-radiative recombination

7 Photon Extraction V OC Basic solar cell definition: absorbs sunlight Thermodynamics: absorber = emitter Equilibrium: R em θ, ω = R abs (θ, ω) detailed balance (Kirchhoff's Law) Non-eq: R em θ, ω dωdω = R abs θ, ω dωdω open-circuit, steady-state Emission (through front) is not a loss mechanism! Any alternate path for photons: (a) represents loss (b) reduces effective carrier lifetimes qv OC = qv OC Ideal kt ln η ext

8 The Voltage Penalty: kt ln h ext Mathematically formulated by Ross, 1967 qv OC = qv OC Ideal kt ln η ext Generalized: Rao, PRB 76, (2007) Kirchartz & Rau, PSSA 205, 2737 (2008) So what? η ext depends very non-linearly on internal parameters!

9 Why do many solar cells have small V OC? Photon extraction is hard! (Ask LED designers) solar radiation Outside escape cone? Absorbed by contact? outgoing luminescence Heat? Non-ideal reflectivity? For a typical high-index material: before escape re-absorption/re-emission events bounces off the rear mirror Consequently a 99% internal radiative efficiency or a 99% reflective back mirror η ext 50% Only half of the photons escape!

10 The Fragility of Shockley-Queisser η int = 100% 90% 80% 70% 1% Many material systems have fundamental limits to η int GaAs: c-si: a-si: η int < 99.7% η int < 20% η int < 10 4

11 Efficiency (%) Single-Junction Efficiency Records: GaAs 33.5% Theory % Best Si (1999- ) Bandgap (ev) 26.4% Previous Record (2010) V oc =1.03V 25.1% Record ( )

12 Efficiency (%) Single-Junction Efficiency Records: GaAs 33.5% Theory % Best Si (1999- ) ~30% 28.8% Alta Devices Bandgap (ev) V oc =1.12V (2012) 26.4% Previous Record (2010) V oc =1.03V 25.1% Record ( )

13 Voc (Volts) Jsc (ma/cm 2 ) Cell Efficiency (%) Efficiency vs. Rear Mirror Reflectivity GaAs 3mm % 32.2% 31.9% Reflectivity 90% Rear Reflectivity Is Not Enough! Reflectivity Reflectivity

14 (<25%) h h h e - h + (>25%) h h g h h h g e - h +

15 GaAs ISE (x20) GaAs Alta (x1) 2010 GaAs (ISE) 2013 GaAs (Alta) J SC V OC FF Eff 29.8 ma cm V 86.0% 26.4% ma 29.7 cm V 86.5% 28.8% M. A. Green, Radiative Efficiency of state-of-the-art photovoltaic cells Courtesy of Alta Devices

16 Clarification: enhanced extraction photon recycling Photon recycling is one way to achieve light extraction, and thereby high Voc. However, there are ways to improve light extraction without enhancing photon recycling. For example: surface texturing. Voc increases. Light extraction is the general parameter that determines Voc, not photon recycling. cf. also Lush & Lundstrom, Solar Cells 30, 337 (1991)

17 Fundamental limits should be General (few parameters) Shockley-Queisser Absolutely. In simplest case, bandgap only Robust A real system will never be perfect. But small imperfections in material/optics should yield small losses in performance. No! By hiding internals, important photon dynamics are obscured Two consequences: (a) For technology selection, need a modified SQ (b) To approach SQ: explicitly design for photon extraction

18 Application to many solar technologies GaAs Single-Junction Multi-Junction Large bandgap Small bandgap Eg2 Eg1 Photon up-conversion Photon down-conversion 3Eg 2Eg Eg 0

19 Multiple-exciton generation: Shockley-Queisser 3Eg 2Eg Eg 0 Hanna & Nozik J. Appl. Phys. 100, (2006)

20 Robustness analysis: multi-exciton generation The absolute voltage penalty ΔV OC = kt ln η ext is independent of bandgap The relative voltage penalty ΔV OC V OC ΔV OC E g is much worse for small E g Depends on exact assumptions geometry, refractive index Illustrates how important it is to look at robustness, photon dynamics

21 Sub-wavelength solar cells: a new wrinkle Atwater et. al., Design Considerations for Plasmonic Photovoltaics, 2010 Pillai et. al. Surface plasmon enhanced silicon solar cells, 2007 Zhu et. al. Nanodome Solar Cells with Efficiency Light Management, 2009 New physics: emission partially de-coupled from absorption emission can occur into near-field (plasmons, quenching, etc.)

22 Modeling emission: fluctuation-dissipation theorem qv OC = kt ln R abs,sun R em,300k R em,300k = 0 n dω ħω S(r, ω) n P r, ω P r, ω S = ħ e ħω/kt 1 ε I r, ω δ(r r ) Joint work led by Xiang Zhang group Phys. Rev. Lett. 109, (2012)

23 Example system: air-si-au thin film ray optics near field (FDT) Emission into plasmon modes: - reduces extraction through the front - reduces carrier lifetimes - reduces V OC Here, plane waves don t couple to plasmons no absorption effect (J SC unaffected) This is ONLY an emission/v OC effect!

24

25 Photon extraction: driver behind record 28.8% efficiency Power output = current * voltage voltage = extraction (difficult!) There are significant returns to: >90% material quality >90% rear mirror reflectivity New considerations at nano-scale Technology selection: Shockley-Queisser is fragile Adding a single parameter, η int, enables robustness analysis Can be applied everywhere SQ can be applied Slides/Codes/Relevant Papers: math.mit.edu/~odmiller/publications