WRENCHES MULTI-GRIP PLIERS WRENCHES Wide Flat Jaw Multi-Grip Pliers

Size: px
Start display at page:

Download "WRENCHES MULTI-GRIP PLIERS WRENCHES Wide Flat Jaw Multi-Grip Pliers"

Transcription

1 MUI-GRIP PIERS Wide Flat Jaw Multi-Grip Pliers nled Jaw Multi-Grip Pliers lamps lap joints allowin four consecutive spot welds without tool removal Spot weldin, uto-body repair work, Steel fabrication Jaw-R-MO Steel, ody: arbon steel with heat-treated lamps lap joints allowin for consecutive spot welds without tool removal Spot weldin, uto-body repair work, Steel fabrication Jaw-R-MO Steel, ody-iron with heat-treated ouble ooked Jaw Multi-Grip Pliers lamps two flaned lapped or adjacent joints uto-body repair, Steel fabrication Jaw-R-MO steel, ody-iron with heat-treated 1-02 Straiht Jaw Multi-Grip Pliers Push bottom release-easy and efficient one-hand releasin Jaw-R-MO Steel, ody-iron with heat-treated ouble urved Jaw Multi-Grip Pliers lamps two flaned lapped or adjacent joints uto-body repair, Steel fabrication Jaw-R-MO steel, ody-iron with heat-treated 0-1

2 orque Strenth 0% iher than IN standard orque and Fatiue tester OPEN EN RING EN orque est - OPEN EN IN Whirlpower 0 IN Whirlpower ifferent anles for better operation Europe type (hin Wall) 0º 1º º º 1 UO-ION RE WREN 2-1 WO ENS + WO IREIONS More efficient and easier to use than traditional wrenches, saves up to 0%+ operation time. Suitable for workin in limited space. More turnin anle up to deree. POWERFU Four contact points to increase torque transmission with even distribution to fastener without causin damae. EFFIIEN Next turn repositionin without removin or liftin the wrench. Point Point Point SPINE ORKS SQURE SE Mulit-Functional system can be applied to different types of bolts and fasteners.

3 Whirlpower s professional wrenches are RV steel manufactured. ouhness, hih torque hih precision yet eleant finish. 1-1 ouble Open End Wrenches IN, ISO Open end anled at 1º 2-1 ombination Wrenches, 1º Offset Rin IN 1, ISO -point rin anled at 1º Open end anled at 1º 1 Gear Wrenches / alf-moon ouble Rin Wrenches ombination Wrenches /Open End Wrenches ox End Wrenches / Flare Nut Wrenches ouble Open End Wrenches Set Strikin Wrenches / anlin Wrenches ombination Wrenches Offset Rin Set ontents x, x, x, x1, 1x1, 1x, 1x x, x, 2x2, 2x2, x2 1 ontents,,,,, 1, 1,,,, 2, 2,, 2 E1 0 1,,,,, 1, 1, 1, 1,, 1,,,,, 2 F1 2 ontents ontents x, x, x, x1, 1x1, 1x 1x, x 0 0 1,,,,, 1, 1, 1, 1,, 1,, 1 0

4 2-1 ombination Wrenches Offset Rin Set 2- ombination Wrenches Offset Rin Set 1-1 ouble Rin Wrenches, º Offset Rin IN, ISO -point rin anled at º 1-1 ouble Rin eep Offset Wrenches Set ontents 1,,,,,,, 1, 1, 1 1,, 1,,, 2 2- ombination Wrenches, º Offset Rin IN 1, ISO -point rin anled at º Open end anled at 1º WR ontents 1,,, 1, 1, 1,,,,, 2, 2,, 2 1,,,,, 1, 1, 1, 1,, 1,,,,, 2 1,,,,, 1, 1, 1, 1,, 1,, 2- uo-ction Ratchet Wrenches E x x x x x x x1 x1 x1 1x1 1x1 1x1 1x 1x x 1x x x x x x2 x 2x 2x2 2x2 2x 2x 2x2 x ouble Rin eep Offset Wrenches Set ontents x, x, x, x1, 1x1, 1x, 1x, x, x, 2x2, 2x2, x ouble Rin orks Wrenches, º Offset Rin IN from E to E2 Rin deep offset º hrome Vanadium Steel ontents x, x1, 1x1, 1x, 1x, x2 ontents x, x, x, x1, 1x1, 1x, 1x, x ExE ExE ExE E1xE1 E1xE ExE E0 WR

5 1- ouble Rin orks Wrenches, Straiht IN 1- alf-moon ouble Rin Wrenches ISO -point rin 1- Extra on ouble Rin Wrenches, Straiht IN, ISO from to 2 -point rin -1 Flexible Ratchet ombination Wrenches onstant ratchet tension for perfect º adjustability Patented desin enables quick workin in tiht spaces (º swin) 2 ExE ExE ExE E1xE1 E1xE ExE Flat ouble Rin orks Offset Wrenches Set x x x x1 x1 1x1 1x1 1x 1x 1x1 x x x alf-moon ouble Rin Wrenches Set x x x x x x1 x1 x1 1x1 1x1 1x 1x 1x1 x 1x x x x x x2 x 2x2 2x2 x2 x Flexible Ratchet ombination Wrenches Set Extra on ouble Rin Wrenches Set alf-moon ouble Rin Wrenches Set, PS ontents No ontents alf-moon ouble Rin Wrenches ExE, ExE, ExE, E1xE1, E1xE, ExE2 0 0 x, x1, 1x, 1x1, x Made in aiwan ontents x, x1, 1x, 1x1, x 0 0 ontents x, x, 1x, x 0 ontents ExE, ExE, ExE, E1xE1, E1xE, ExE2 0 0 ontents x, x1, 1x1, 1x, 1x1, x E0 ontents,,, 1, 1,, 0 0

6 - Ratchet ombination Wrenches Patented desin enables quick workin in tiht spaces (º swin) Slim dimensions further ease workin in confined areas Ratchet ombination Wrenches Set Reversible Ratchet ombination Wrenches ouble Socket Ratchet Wrenches, Straiht Slim dimensions further ease workin in confined areas 2-teeth reversible ratchetin ear Patented desin enables quick workin in tiht spaces (º swin) 1 offset, reversible 1 offset anle Reversible switch Ratchet ombination Wrenches Set ontents,,, 1, 1,, ontents 1 ih orque Ratchet Wrenches,,,,, 1, 1, 1, 1,, 1, Ratchet river ead 1/", /", 1/2" ex Ratchet itholdler 1/" WR0 Insert ratchet driver head into the box end, it can be used with socket and bit Socket it x x1 x1 x1 1x 1x1 1x 1x1 x x 1x2 x x x x2 x x2 x x2 x2 x2 x 2x2 2x x2 2x 2x2 x2 x 2x 2x 2x x x1 x x0 x1 x0 1x 1x0 1x x 0x

7 -1 ouble Ended ubular Socket Wrenches IN, ISO -point socket hexaon -2 ouble Ended nled Socket Wrenches point x point socket - ouble ined Socket Wrenches IN, ISO -1 point -1 Flare Nut Wrenches IN 1, ISO 1 Open end anled at 1º X x x x1 1x1 1x 1x x x 2x 2x2 2x x Stepped oy ar Ø 1 Ø 2 Ø x x x x1 1x1 1x 1x x x ouble ined Socket Wrenches Set x x x x x x1 x1 x1 1x1 1x 1x x 1x x x x x2 2x2 2x2 x x ~1 - point 1~2 - point Flare Nut Wrenches Set ouble Ended ubular Socket Wrenches Set ouble Ended nled Socket Wrenches Set ontents x, x, x1, 1x1, 1x, 1x, x 0 ontents x, x, x, x1, 1x1, 1x 0 1x, x Stepped oy ar, Ø2.x., Ø.x.x.2 10 ontents,,,, 1, 1, 1,, 1,,, 2 0 ontents ontents x, x, x1, 1x1, 1x, WR0 2 x, x, x1, x1, 1x, x x, x 0 00

8 -1 Flare Nut Wrenches Set 1-2 eavy uty Open-End Wrenches IN hrome molybdenum alloy steel Phosphate sunk finish -1 hin-wall Strikin Rin Wrenches IN hrome molybdenum alloy steel Phosphate sunk finish -1 Ratchet Flare Nut Wrenches Suitable for pipes of automotive, construction, air condition and refrieration lley steel ontents x, x, x1, x1, x, x WR0-2 Sinle Flare Nut Wrenches, Offset Rin 1 x x 1-1 Strikin Wrenches IN 1 hrome molybdenum alloy steel Phosphate sunk finish k Sinle Rin Wrenches, Offset Rin hrome molybdenum alloy steel Phosphate sunk Finish k k k Ratchet Flare Nut Wrenches Set ontents,, 1,,,

9 - ubular andle Mat chrome finish - Strikin Rin Wrenches, Offset Rin hrome molybdenum alloy steel Phosphate sunk finish 1- djustable Wrench IN Phosphate finish omfortable and stron rip PR handle 1% - 2% wider jaw openin increases useful rane of fastener sizes k eavy uty Rin Wrenches, Offset Rin hrome molybdenum alloy steel Phosphate Sunk Finish k djustable Wrenches IN Phosphate finish k " " " " 1" (max) Measurin scale assist you to find demand size speedly Wider Jaw Openin (up to 1~2% wider) increases useful rane of fastener sizes. 0 " " " " " 1" 1" (max) Normal. Whirlpower Non-Protrudin on the movable jaw end. his allows a reater ease of use in tiht spaces.

WRENCHES DUO-ACTION RATCHET WRENCH TWO ENDS + TWO DIRECTIONS

WRENCHES DUO-ACTION RATCHET WRENCH TWO ENDS + TWO DIRECTIONS WRENES orque Strenth 0% iher than IN standard OPEN EN RING EN 00 orque est - OPEN EN IN orque and Fatiue tester IN Whirlpower Whirlpower 00 10 00 00 00 0 0 0 1 2 2 1 2 2 Europe type (hin Wall) ifferent

More information

7 Revised AM001 Rev. 01/17

7 Revised AM001 Rev. 01/17 Spare Parts Price Book The Spare Parts Price Book will be used for procuring replacement parts under WMATA s micro purchasing method. While the Spare Parts Price Book is a mandatory submission for your

More information

DISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS

DISCONTINUED PRECISION MEASURING FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS FOWLER CALIPERS 1 - VERNIER CALIPERS 4 - ELECTRONIC CALIPERS 52-058-016 Fine quality vernier calipers are constructed of stainless steel. 52-057-004 offers 3-way measurement to accuracy. 52-058-XXX series

More information

D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s

D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s 1. Design of various types of riveted joints under different static loading conditions, eccentrically loaded riveted joints.

More information

Sample 5. Determine the tension in the cable and the horizontal and vertical components of reaction at the pin A. Neglect the size of the pulley.

Sample 5. Determine the tension in the cable and the horizontal and vertical components of reaction at the pin A. Neglect the size of the pulley. Sample 1 The tongs are designed to handle hot steel tubes which are being heat-treated in an oil bath. For a 20 jaw opening, what is the minimum coefficient of static friction between the jaws and the

More information

DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.

DN 1/4 to 4 Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore. Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page

More information

M A C H I N E L I S T - P R O D U C T I O N P R O C E S S E S

M A C H I N E L I S T - P R O D U C T I O N P R O C E S S E S S P E C T R U M O F S E R V I C E S G R A P H I C S All commonly available programmes C O N S T R U C T I O N CAD, 3D construction, static loading, structural analysis interfaces to industrial construction

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut

More information

DN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore

DN 1/4 to 4 Male, Female BSP - 10 C C Max Pressure : 30 Bars (up to DN1) Specifications : Anti blow-out stem PTFE packing Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 30 Bars (up to DN1") Specifications : Anti blow-out stem PTFE packing Full bore Materials

More information

Force Couple Systems = Reduction of a Force to an Equivalent Force and Moment (Moving a Force to Another Point) acting on a body has two effects:

Force Couple Systems = Reduction of a Force to an Equivalent Force and Moment (Moving a Force to Another Point) acting on a body has two effects: ESULTANTS orce Couple Systems = eduction of a orce to an Equivalent orce and Moment (Moving a orce to Another Point) The force acting on a body has two effects: the first one is the tendency to push or

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter

More information

Identification Number. Accuracy. Clearances. Examples of identification number. Table 3 Radial internal clearance. Table 1 Tolerances

Identification Number. Accuracy. Clearances. Examples of identification number. Table 3 Radial internal clearance. Table 1 Tolerances Identiication umber Accuracy learances The identiication number example o Hex Head am Followers are shown below. Examples o identiication number Tolerances o Hex Head am Followers are shown in Table and

More information

NYLON TIPPED SET SCREWS

NYLON TIPPED SET SCREWS YO PPE SE SCEWS SEF-OCKG OMAG MAEA: Screw - 00 Series (-) ip - ylon SPECFCAOS: Slotted ead Style: Class A Socket ead Style: Class A For enineerin assistance for all SP components, call on our application

More information

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18 erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves

More information

Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR

Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR CST/Berger 2001 SAL 20/24/28/32 PAGE 1 REV. C 071803 Automatic Level Maintenance Manual User Calibration and Testing... 3 Circular

More information

A through-bolt expansion wedge anchor with controlled torque, for use in cracked and non cracked concrete.

A through-bolt expansion wedge anchor with controlled torque, for use in cracked and non cracked concrete. A through-bolt expansion wedge anchor with controlled torque, for use in cracked and non cracked concrete. ETA assessed option 1 anchor. Galvanised carbon steel, with 316 (A4) stainless steel expansion

More information

411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.

411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In. Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00

More information

STEEL. General Information

STEEL. General Information General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate

More information

Bulkhead Fitting Product Guide

Bulkhead Fitting Product Guide 1/2" TO 3" PV OMPRSSION FITTING * oes not come with bulkhead fitting MTRILS Robust PV Upper and Lower ody onstruction PV ell lass 12454 per STM 1784 Stainless Steel Wave Spring 17-7 PH Stainless Steel Fits

More information

Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing. Potable Water. Residential Fire Sprinkler.

Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing. Potable Water. Residential Fire Sprinkler. Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other 1 of 18

More information

Contact pressure distribution in joints formed by V-band clamps Simon M Barrans 1,a, Goodarz Khodabakhshi 1,b and Qiang Xu 1,c

Contact pressure distribution in joints formed by V-band clamps Simon M Barrans 1,a, Goodarz Khodabakhshi 1,b and Qiang Xu 1,c Contact pressure distribution in joints formed by V-band clamps Simon M Barrans 1,a, Goodarz Khodabakhshi 1,b and Qiang Xu 1,c 1 School of Computing and Engineering, University of Huddersfield, Queensgate,

More information

Cipriani Harrison Valves Corp.

Cipriani Harrison Valves Corp. Butterfly Valve pplication Stainless steel hygienic butterfly valves are used in process piping systems for isolation and control. Butterfly valves operate either manually or automatically. Working Principle

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Brass

Size : Ends : Min Temperature : Max Temperature : Materials : Brass Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut

More information

Submittal Package PEX Press Fittings with Attached Sleeves For Use with Viega PureFlow Tubing

Submittal Package PEX Press Fittings with Attached Sleeves For Use with Viega PureFlow Tubing Submittal Package For Use with Viega PureFlow Tubing Project: Engineer: Contractor: Submitted By: Potable Water Other 1 of 13 Submittal Package For Use with Viega PureFlow Tubing Technical Data Materials:

More information

flexible couplings for pipe repair

flexible couplings for pipe repair A R P O L R E P flexible couplings for pipe repair 1 TABLE OF CONTENTS Advantages and Installation Arpol Repair Systems Nominal charts Material specifications Gaps between pipe ends Outside Diameter tolerances

More information

MODULAR AND CUSTOM EXHIBIT SOLUTIONS

MODULAR AND CUSTOM EXHIBIT SOLUTIONS 2018 MODULAR AND CUSTOM EXHIBIT SOLUTIONS KLIK MAGNETIC DISPLAYS Crown Molding Finish off any pillow case box shape with our crown molding for a tight, architectural look. Artwork Framed artwork or just

More information

THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC.

THE ANSWER TO PROBLEMS OF: CORROSION, ABRASION, GRANULATED MATERIALS, POWDERS, SLUDGE, GAS ETC. P PINC VLVE Mod. S pag. Mod. S pag. Mod. S pag. Mod. SD pag. Mod. S pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S0 pag. Mod. S pag. 0 Mod. S pag. Mod. S pag. Mod. S pag. Mod. S pag. TE

More information

Viega PEX Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow Tubing. Potable Water. Residential Fire Sprinkler.

Viega PEX Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow Tubing. Potable Water. Residential Fire Sprinkler. Viega PEX Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other 1 of 15 Viega PEX

More information

Mookambigai College of Engineering, Pudukkottai, Tamil Nadu, India

Mookambigai College of Engineering, Pudukkottai, Tamil Nadu, India ISSN XXXX XXXX 2017 IJESC Research Article Volume 7 Issue No.6 Structural Optimization of ER Spring Collet for Maximized Gripping Action Ram Prasad. S 1, Pravin Kumar. N 2, Jerry Andrew Fabian. S 3 M.E

More information

W W W. T Y G. C O M. M X

W W W. T Y G. C O M. M X T O O L I N G E Q U I P M E N T S H A R M E N I N G S E R V I C E R E A M E R S D R I L L S E N D M I L L S D R I V E S S P I N D L E R E P A I R S E R V I C E B A L L S C R E W S E R V O S B A N D S A

More information

D M4500 Series 3-Piece Ball Valve

D M4500 Series 3-Piece Ball Valve M0 Series iece all Valve TURS & NITS * or food and general chemical service application * Comes standard in stainless steel and carbon steel * Investment cast body and end caps * Self adjusting stem packing

More information

ME 201 Engineering Mechanics: Statics

ME 201 Engineering Mechanics: Statics ME 201 Engineering Mechanics: Statics Unit 7.1 Simple Trusses Method of Joints Zero Force Members Simple Truss structure composed of slender members joined together at their end points Planar Truss Simple

More information

PARTS LIST BRUSHCUTTERS BK3402FL BK4302FL (CHINA)

PARTS LIST BRUSHCUTTERS BK3402FL BK4302FL (CHINA) T1232-93121 (907) PARTS LIST BRUSHCUTTERS BK3402FL BK4302FL (CHINA) : 1. Use ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. ZENOAH does not warrant the machines,

More information

The Bionic Lightweight Design of the Mid-rail Box Girder Based on the Bamboo Structure

The Bionic Lightweight Design of the Mid-rail Box Girder Based on the Bamboo Structure Wenmin Chen 1, Weian Fu 1, Zeqian Zhan 1, Min Zhan 2 Research Institute of Mechanical Enineerin, Southwest Jiaoton University, Chendu, Sichuan, China (1), Department of Industrial and System Enineerin,

More information

M/60210/M Miniature rotary actuators

M/60210/M Miniature rotary actuators M/6020/M Miniature rotary actuators Double acting - Magnetic piston - Ø 2 and 20 mm Smooth operation with zero backlash Lightweight ompact envelope dimensions Integral magnets for positional feedback TEHNIL

More information

Cat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity.

Cat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity. Cat Multi-Processors Hydraulic Excavators Maximum Productivity Big challenges are reduced to small pieces, thanks to high cutting and crushing forces generated by the cross-mounted cylinder. High productivity

More information

HDF series - PARALLEL GRIPPER

HDF series - PARALLEL GRIPPER Operation specification and Ordering expression Internal structure DS Angular DM 0 Angular Specification ore size Type of operation Fluid Pressure range Range of service temperature kgf/cm (kpa) Max. operation

More information

Metal core drills the most cost-effective drilling experience.

Metal core drills the most cost-effective drilling experience. Metal core drilling Metal core drills the most cost-effective drilling experience. Core drilling is an extremely efficient process: faster, quieter and more accurate than twist drilling. And since core

More information

The FLUX F 430 with mechanical seal

The FLUX F 430 with mechanical seal The FLUX F 0 with mechanical seal Flexible coupling between motor and pump The pump must be used with many varying liquids, consequently the smallest residual left within the pump is unacceptable. You

More information

Clausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Clausing Industrial, Inc. Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm

More information

CRYOGENIC CONDUCTION COOLING TEST OF REMOVABLE PANEL MOCK-UP FOR ITER CRYOSTAT THERMAL SHIELD

CRYOGENIC CONDUCTION COOLING TEST OF REMOVABLE PANEL MOCK-UP FOR ITER CRYOSTAT THERMAL SHIELD CRYOGENIC CONDUCTION COOLING TEST OF REMOVABLE PANEL MOCK-UP FOR ITER CRYOSTAT THERMAL SHIELD K. Nam, a D. K. Kang, a W. Chung, a C. H. Noh, a J. Yu, b N. I. Her, b C. Hamlyn-Harris, b Y. Utin, b and K.

More information

Uncompromised Exposure

Uncompromised Exposure TST ST U iver Transplant/ esection ediatric bdominal idney Transplant inimal ccess hoto compliments aniel urillo, Uncompromised xposure The Thompson iver Transplant/esection System is the best retractor

More information

Mineral-insulated thermocouples to DIN and EN

Mineral-insulated thermocouples to DIN and EN Data Sheet 90.1210 (90.1221) Page 1/7 s to DIN 43 710 and EN 60 584 for temperatures from -200 to +1200 C flexible sheath with shock-proof measuring insert protection tube diameter from 0.5mm fast response

More information

G-FIRE FLANGE ADAPTERS

G-FIRE FLANGE ADAPTERS G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10

More information

AT SERIES OFF CIRCUIT TAP CHANGERS

AT SERIES OFF CIRCUIT TAP CHANGERS T SERIES OFF CIRCUIT TP CHNGERS THE CHOICE COE S.P.. PUTS ON THE RKET THE NEW T SERIES OFF CIRCUIT TP CHNGERS. T COE: THE CHOICE Comem S.p.. makes use of four main characteristics in order to be successful

More information

Absolute encoders multiturn

Absolute encoders multiturn elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature

More information

Unfinished Bolt ordinary, common, rough or black bolts High strength Bolt friction type bolts

Unfinished Bolt ordinary, common, rough or black bolts High strength Bolt friction type bolts Bolted Connections Introductions: Connections are always needed to connect two members. It is necessary to ensure functionality and compactness of structures. Prime role of connections is to transmit force

More information

MINI-CYLINDER ISO 6432 SERIES TP Ø mm AND ACCESSORIES

MINI-CYLINDER ISO 6432 SERIES TP Ø mm AND ACCESSORIES -YR O R T OR inicylinders manufactured according to the O regulation having high resistance technopolymer heads and anodized aluminium liner. vailable in various versions with a wide range of accessories:

More information

RYOBI 10 in. TABLE SAW MODEL NUMBER BTS21

RYOBI 10 in. TABLE SAW MODEL NUMBER BTS21 0 1 1 1 1 1 1 1 SEE FIGURE A 1 1 1 1 1 1 1 1 SEE FIGURE C 1 1 1 1 0 1 SEE FIGURE E 1 SEE FIGURE D 1 1 10 1 0 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1 10 1 0 1 1 0 1 1 SEE FIGURE

More information

Hudevad P100. Technical datasheet

Hudevad P100. Technical datasheet Technical datasheet Key benefits Available in three depths Highly flexible in use Integrated top grille Harmonious and finished look Kundenedfal Low, streamlined design Ideal in front of glazing to prevent

More information

6Bore Gauge & Micro Hole Test. Dial Indicator (Option)

6Bore Gauge & Micro Hole Test. Dial Indicator (Option) ore Gauge & Micro Hole Test Holder Dial Indicator (Option) Holder lamp Screw Grip ore Gauge is the comparative measuring instrument which measures internal diameter of a hole by comparing with master gauge

More information

CF (Conflat Flange) Fittings - Adapters. (505)

CF (Conflat Flange) Fittings - Adapters.  (505) F (onflat ) 1 Fittings - dapters www.idealvac.com (505)72-0037 1 Vacuum Fittings - dapters - olt Kits F - onflat F onflat flanges (F) are used for ultra- Vin elasmer gaskets can be used over and over but

More information

Manually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting.

Manually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting. Manually Operated Directional s DM- / / DMG- / / / / hread Connection / Mounting Specifications hreaded Connections Numbers DM--C - DM--D - DM--D - DM--B - DM- -C - DM- -D - DM- -D - ( ) (.) (.) (.) (.)

More information

Più alto 3d flat»cc«datasheet

Più alto 3d flat»cc«datasheet Datasheet LED wall / ceiling spotlight with single-sided light output. Optionally available with optics (Più) or flat with internal (Più R). Version with flat base for fitting on hollow ceiling or flush-mounted

More information

BUILT TOUGH. P.O. Box 845 Winona, MN Ph Tf Tech Support Fx

BUILT TOUGH. P.O. Box 845 Winona, MN Ph Tf Tech Support Fx BUILT TOUGH P.O. Box 845 Winona, MN 55987 Ph 507.474.6250 Tf 800.749.1064 Tech Support 507.457.3346 Fx 507.452.5217 sales@ozliftingproducts.com QUALITY CONTROL In our continued commitment to quality, we

More information

2.4M SERIES 1241 ANTENNA

2.4M SERIES 1241 ANTENNA 4096-859 Revision D April 19, 2016 2.4M SERIES 1241 ANTENNA General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com General Dynamics Page 1 4/19/2016

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about

More information

Understanding 19. (a) If they both hit the ground at the same time, the object with the greater mass has a larger crosssectional

Understanding 19. (a) If they both hit the ground at the same time, the object with the greater mass has a larger crosssectional Chapter 4 Review, paes 198 203 Knowlede 1. (c) 2. (b) 3. (a) 4. (d) 5. (a) 6. (b) 7. (d) 8. (c) 9. (c) 10. (d) 11. (c) 12. (a) (iii) (b) (i) (c) (iv) (d) (ii) 13. A force field is a reion of space surroundin

More information

Part No. Part Name Spec.

Part No. Part Name Spec. NPR50A_pl160513 NP50A / NR50A (*Include ) 2016/5/13 Title Part Part Name Spec. 1 1 1.BASE W083 HEX SOCKET HEAD CAP SCREW M8 25 2 Y Y Y: YES 1 2 1.BASE PM62 REAR GRIP 1 N N N: NO 1 3 1.BASE W051 HEX SOCKET

More information

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2. 18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300 INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37850 Application: HONDA 300 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have

More information

Bore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size

Bore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size *2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption

More information

Engineering Mechanics. Equivalent force systems: problems

Engineering Mechanics. Equivalent force systems: problems Engineering Mechanics Equivalent force systems: problems A 36-N force is applied to a wrench to tighten a showerhead. Knowing that the centerline of the wrench is parallel to the x axis. Determine the

More information

SL27C SL32C. ScreenLine. Technical Catalogue. english. double-glazed unit 27 mm 32 mm

SL27C SL32C. ScreenLine. Technical Catalogue. english. double-glazed unit 27 mm 32 mm VENETIAN SL27C SL32C BLIND english Technical Catalogue double-glazed unit 27 mm 32 mm dimensions technical specification SL27C SL32C System C C SL27C VENETIAN SL32C BLIND The venetian blinds SL27C and

More information

Low Profile Slide Table

Low Profile Slide Table Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with

More information

Specifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7

Specifications. Performance. Mechanical Properties. Optional Accessories SR50. Saddle (CA 10B) (Option) Mount Base. LCR-B-5KNS7 to 50KNS7 LR--S7 Tension Meter Load ell 5 to 0 kn TRNSURS igh safe overload rating of 0% max. Mechanical stopper activating against overloads of 1% to 0% ermetically sealed structure with inert gas filled in ighly

More information

High Pressure Ball Valves

High Pressure Ball Valves High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.

More information

MODULAR AND CUSTOM EXHIBIT SOLUTIONS

MODULAR AND CUSTOM EXHIBIT SOLUTIONS MODULAR AND CUSTOM EXHIBIT SOLUTIONS Hanging Elements Custom hanging elements are a great way to be seen from across the hall or convention center. Custom Light Solutions Everyone knows how critical lighting

More information

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.

Product Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009. 4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that

More information

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400

INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400 INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37851 Application: HONDA 400 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have

More information

PILLAR P E E K A N D P T C S P A C E R S Y S T E M PEEK PTC

PILLAR P E E K A N D P T C S P A C E R S Y S T E M PEEK PTC PILLAR SA P E E K A N D P T C S PA C E R S Y S T E M PEEK PTC PILLAR SA PEEK AND PTC SPACER SYSTEM STAND ALONE INTERBODY IMPLANT FOR USE IN ALIF PROCEDURES AVAILABLE IN BOTH PEEK TITANIUM COMPOSITE (PTC)

More information

A through-bolt expansion wedge anchor with controlled torque, for use in non cracked concrete.

A through-bolt expansion wedge anchor with controlled torque, for use in non cracked concrete. A through-bolt expansion wedge anchor with controlled torque, for use in non cracked concrete. ETA assessed option 7 anchor. Stainless steel 316 (A4) grade, with 316 (A4) grade stainless steel expansion

More information

E x t e r n a l M i c r o m e t e r s

E x t e r n a l M i c r o m e t e r s External Micrometers B-1 Precision Measurement Precision measurement requires the use of micrometers. The first measuring tool of this type was patented by the French inventor Jean Laurent Palmer in 1848

More information

Ferrite Cores for Induction Welding

Ferrite Cores for Induction Welding 2005 Product Line atalog Ferrites and ssemblies for High Frequency Induction Welding Subsidiary of TT electronics plc Ferrite ores for Induction Welding F59 Typical Performance urves Ferrite Impeder Materials

More information

External Micrometers. C-1

External Micrometers.   C-1 External Micrometers C-1 E X T E R N A L M I C R O M E T E R S PRECISION MEASUREMENT Precision measurement requires the use of micrometers. In 1848, the first measuring tool of this type was patented by

More information

Measuring and Laying-Out Tools, Testing Instruments

Measuring and Laying-Out Tools, Testing Instruments Measuring and Laying-Out Tools, Testing Instruments Slide Callipers Micrometer Gauges Thread Measuring Wires Setting Gauges Multi-purpose Measuring Device 1 1.1 1.4 Gauge Blocks Gauges Gauge Ball Sets

More information

MADILL MBT GRAPPLE RETURN TO INDEX

MADILL MBT GRAPPLE RETURN TO INDEX MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions

More information

PIRATE SHIP EXAMPLE REPORT WRITE UP

PIRATE SHIP EXAMPLE REPORT WRITE UP PIRATE SHIP EXAMPE REPORT WRITE UP Title Aim period Pirate Ship investiation To find the relationship between the lenth of a pendulum and its Independent variable the lenth of the pendulum. I will use

More information

INSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES

INSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES INSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES 2018 TESLA, INC. All rights reserved. All information in this document and all MODEL 3 software is subject to copyright and other intellectual property

More information

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke. Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type

More information

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS

More information

Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses

Variable Speed 20 Single and Multi-spindle, Belt Drive Industrial Drill Presses www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm

More information

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings

More information

JTC TOOL. 6Bore Gauge & Micro Hole Test. Dial Indicator (Option)

JTC TOOL. 6Bore Gauge & Micro Hole Test. Dial Indicator (Option) Holder ore Gauge & Micro Hole Test Interchangeable Rod nvil Nut Dial Indicator (Option) Holder Clamp Screw Grip Joint Guide Contact Point This is designed for measuring diameter of small holes exclusively

More information

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment

More information

S E G N A L F E IP P

S E G N A L F E IP P 9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow

More information

Front Sprocket Norton 961

Front Sprocket Norton 961 1 P a g e r i c h a r d @ c o o t e 1. c o m c o p y r i g h t 2 0 1 6 This section shows how to replace your front Sprocket Per chance you re going touring or looking for faster off the line performance.

More information

CLUTCHES AND BRAKES. Square-jaw clutch

CLUTCHES AND BRAKES. Square-jaw clutch Clutches: CLUTCHES AND BRAKES A Clutch is a mechanical device which is used to connect or disconnect the source of power from the remaining parts so the power transmission system at the will of the operator.

More information

ARC241 Structural Analysis I Lecture 5, Sections ST4.5 ST4.10

ARC241 Structural Analysis I Lecture 5, Sections ST4.5 ST4.10 Lecture 5, Sections ST4.5 ST4.10 ST4.5) Moment of a Force about a Specified Axis ST4.6) Moment of a Couple ST4.7) Equivalent System ST4.8) Resultant of a Force and a Couple System ST4.9) Further Reduction

More information

FORMWORK SAVINGS ADAPTABILITY LIGHT WEIGHT ECONOMICAL ALUMINIUM SLAB FORMWORK. BV Cert

FORMWORK SAVINGS ADAPTABILITY LIGHT WEIGHT ECONOMICAL ALUMINIUM SLAB FORMWORK. BV Cert FORMWORK SAVINGS ADAPTABILITY LIGHT WEIGHT ECONOMICAL ALUMINIUM SLAB FORMWORK BV Cert. 6150814 Dalphi Economical aluminium slab formwork 2 FORMWORK The economical, high-performance Dalphi floor formwork

More information

High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet

High-efficiency Circulator Pump. Rio-Eco N / Rio-Eco Z N. Type Series Booklet High-efficiency Circulator Pump Rio-Eco N / Rio-Eco Z N Type Series Booklet Legal information/copyright Type Series Booklet Rio-Eco N / Rio-Eco Z N KSB Aktiengesellschaft All rights reserved. The contents

More information

C IN CLOSED POSITION D M S L IN CLOSED POSITION E M N. Closed Closed

C IN CLOSED POSITION D M S L IN CLOSED POSITION E M N. Closed Closed UNVA JON OPN UNVA JON HA-AN OOON-AN MAA: Joints - 0 eries tainless teel pline - tainless teel OPAN MPAU: 0 to +0 (YP) PHON:..00 AX:.. WWW.P-.OM N O POON PN MAX. 0 Ø NH OMPONN atalog Number A X -0 A X -0

More information

DECLARATION OF PERFORMANCE

DECLARATION OF PERFORMANCE EN DECLARATION OF PERFORMANCE DoP No. Hilti HUS3 0672-CPD-0361 1. Unique identification code of the product-type: Hilti Screw Anchor HUS3 2. Type, batch or serial number as required pursuant to Article

More information

Technical analysis and diagramming exercises

Technical analysis and diagramming exercises Technical analysis and diagramming exercises 1 st year of the second cycle Name: June 2010 By a team made up of: Madame Isabelle Lafrance, pedagogical counsellor at the commission scolaire Coeur-des-Vallées

More information

When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero.

When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero. When a rigid body is in equilibrium, both the resultant force and the resultant couple must be zero. 0 0 0 0 k M j M i M M k R j R i R F R z y x z y x Forces and moments acting on a rigid body could be

More information

2017 greatest possible measuring dependability. With certificate.

2017 greatest possible measuring dependability. With certificate. t SmartCheck Tester for torque wrenches and torque screwdrivers Advantages at a glance oust: The integrated visual and audile overload protection mechanism ensures the duraility customers expect of STAHWIE.

More information

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for

More information

Introduction to Geohazard Standard Specification for Simple Drapery

Introduction to Geohazard Standard Specification for Simple Drapery Introduction to Geohazard Standard Specification for Simple Drapery Up to now, there is no standard specification for geohazard solutions in North America. Often projects specifications are referring to

More information

3.8M C-BAND Rx/Tx ANTENNA SYSTEM

3.8M C-BAND Rx/Tx ANTENNA SYSTEM Revision J May 13, 2002 ASSEMBLY MANUAL 3.8M C-BAND Rx/Tx ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 3.8M C-BAND Rx/Tx ANTENNA SYSTEM J Revised Per ECN#3094 10/7/04 H Revise

More information

SUBMINIATURE MICROSWITCHES - PREMIUM

SUBMINIATURE MICROSWITCHES - PREMIUM 0/08 SUBMINIATUE MICOSWITCHES - PEMIUM V - 870 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed atings from ma Vc up to (6) A 0

More information