The stability of linear time-invariant feedback systems

Size: px
Start display at page:

Download "The stability of linear time-invariant feedback systems"

Transcription

1 The stability of linear time-invariant feedbac systems A. Theory The system is atrictly stable if The degree of the numerator of H(s) (H(z)) the degree of the denominator of H(s) (H(z)) and/or The poles of H(s) left half plane (interior of the unit circle for the discrete-time case). Wide sense stable systems the poles of H(s), s p imaginary axis jω / the poles of H(z) z p unit circle r (discrete-time). Strictly stable system if and only if the denominator of the transfer function H(s) is a Hurwitz polynomial. Q(s) strictly/wide sense Hurwitz if Has real coefficients, (strictly or not) positive + The roots of Q(s) (poles) are in the left half plane (which means Re{z} < 0) A strictly Hurwitz polynomial has all the minors of n th order, Δ n > 0 (its zeros are in the closed left half plane). A wide sense Hurwitz polynomial can have some minors zero Δ 0, and the rest positive (some of its zeros are in the closed left half plane and if there are zeros on the imaginary axis). Δ n a a a a a a a a a a a a a a a a a n Y s X s H s (continuous time) + H s G s Y z H z (discrete time) X z + H z G z

2 H( s) G( s) respectively W( z) H( z) G( z) W s the transfer function in open loop. The open loop system is strictly stable if The roots +W(s)0 closed left half plane (the real part <0) or The roots +W(z)0 interior of the unit circle r The Nyquist s Stability Criterion Y s X s H s respectively + H s G s Y s X s H s + H s G s + H( s) G( s) R( z) + H( z) G( z) R s + doesn t have zeros in the right half plane or the imaginary axis jω R ( s) H( s) G( s) > H( jω ) G( jω ) ω (, ) Nyquist hodograph of the open loop system. The number of complete rotations around the point (-/, 0) in counter-clocwise sense is n times where n n + n, i c n i number of poles from the right half plane and n c number of poles from the imaginary axis (continuous time) + doesn t have zeros outside the unit circle r (ze jω ) H( z) G( z) R z i n number of poles outside the unit circle r, c n number of poles on the unit circle r (discrete time)

3 B. Problems Problem. Consider the amplifier with the transfer function Ga H( s) s + a a) Find the DC gain of the amplifier. b) What is the time constant of the system? c) The bandwidth of the amplifier is the frequency where the magnitude of the frequency response is times smaller than the DC gain. What is the bandwidth of this amplifier? d) The amplifier is placed into a feedbac loop: x(t) Ga s+ a y(t) K What is the DC gain, the time constant and the bandwidth of the feedbac system? e) Find the value for which the bandwidth of the closed loop system is double the bandwidth in open loop. Solution. a) H( jω ) L at Ga jω + a b) e σ () t. s+ a If ht () e τ σ () t t. The DC gain is H ( 0 ) G then τ is the time constant of the system at ht () Gae σ () t τ a G B H jωm H jω Ga G ω T a ω + a c) The bandwidth is. But M Ga ω + a d) + Y s X s Y s H s Y s X s H s Y s H s Y s H s X s H s 3

4 Ga Y( s) H( s) s+ a Hbî s X ( s) + H( s) Ga + s + a G The DC gain of the feedbac system is Hclosed ( 0) + G Ga Ga Hclosed ( s) s+ a+ Ga s+ a( + G) The time constant is τ a + G H closed ( ω) Ga jω + a + G ( ) Ga G jωcclosed + a( + G) ( + G) Ga G ( ω ) + a ( + G) ( + G) cclosed ( ωcclosed) + a ( + G) ( + G) a ( + G) ( ωcclosed) + a ( + G) ω a( + G) cclosed a e) The cutoff frequency (bandwidth) of the closed loop system: ωcclosed ω T a( + G) a. G Problem. Determine the transfer function for each system represented below. a) x(t) H 0 (s) u(t) H (s) y(t) G(s) 4

5 b) H 0 (z) x[n] u[n] H (z) v[n] y[n] w[n] G(z) c) x(t) u(t) v(t) w(t) H (s) H (s) y(t) G (s) G (s) Solution. a) b) U( s) X ( s) H0 ( s) + Y( s) H ( s) U( s) + G( s) H ( s) Y( s) H ( s) X ( s) H0( s) + G( s) H( s) Y( s) H( s) H0( s) X ( s) + G( s) H ( s) Y s U s Y s G s H s Y s G s H s U s H s un [ ] xn [ ] wn [ ] şi V ( z) U( z) H ( z) U( z) + G( z) H ( z) X ( z) X ( z) U( z) + G( z) H ( z), but V ( z) U z H ( z) U z X z W z X z G z V z X z G z H z U z 5

6 H ( z) X ( z) V ( z) + G ( z ) H ( z ) 0 + H ( z) X ( z) X ( z) H0 ( z) + + G( z) H ( z) Y( z) H ( z) H0 ( z) + X ( z) + G( z) H ( z) Y z X z H z V z c) U( s) X ( s) G ( s) Y( s) V ( s) U( s) H ( s) W ( s) V ( s) Y( s) G ( s) Y( s) W ( s) H ( s) Y( s) H( s) V( s) Y( s) G( s) Y( s) H( s) H( s) U( s) Y( s) G( s) H ( s) H ( s) X ( s) G ( s) Y( s) Y( s) G ( s) { } + + Y s H s H s G s H s G s H s H s X s Y s H s H s. X s + H s H s G s + H s G s Problem 3. Consider the system described by the linear constant-coefficients differential equation y + 6y + 9y + y x + 6x + 8x with null initial conditions. Study the stability of the system based on the Hurwitz stability criterion. Solution Y( s) s + 6s + 8s 3 X ( s) s + 6s + 9s+ 3 3 s Y s s Y s sy s Y s s X s s X s sx s The numerator has positive coefficients, which means we can apply Hurwitz criterion. a0, a 6, a 9, a3 We compute the determinant: a a3 a5 6 0 Δ 3 a0 a a a a

7 and the minors: Δ 6> 0 Δ > 0 Δ Δ All the minors are positive, meaning the system is strictly stable. 3 Problem 4. Consider the following closed loop system x(t) H(s) y(t) G(s) Find the values for for which the system is stable, if s a. H( s) G( s) f. H ( s ) G ( s ) + s b. H( s) G( s) g. H ( s ) G ( s ) c. H( s) G( s) d. H( s) G( s) e. H( s) G( s) s ( s + ) + 0 s s + H s G s h. ( s + ) 3 ( s + ) 4 s + s 4 i. H( s) G( s) s + s+ (homewor). Solution. a. H( s) G( s) H jω G jω s + jω +, s p - In order to setch the hodograph we can use the Bode plots. H( jω) G( jω) ω + ω 0 log H( jω) G( jω) 0 log ( ω + ) 0 log + ω arg{ H( jω ) G( jω) } arg ( jω) arctg + arctgω 7

8 Counter-clocwise ω - ω0 ω± ω 8

9 The open loop system is stable the hodograph doesn t have to mae rotations around the point of coordinates,0 0 0 or (, 0) < > > The closed loop system is stable for >-! s The open loop system is unstable with one pole in the left half plane s p H( jω) G( jω) ω + ω arg{ H( jω ) G( jω) } arg ( + jω) π + arctg π + arctgω jω+ jω+ H( jω) G( jω) jω ω ω + ω + j ω + ω + b. H( s) G( s) ω > Re{ H( jω) G( jω )} < 0, { H( j ) G( j )} For 0 Re Im Im ω ω < 0 ω Re{ H( jω ) G( jω )} Im{ H( jω ) G( jω )} 0-0 -/ -/ 0 0 The Nyquist hodograph maes rotations in counter-clocwise sense. The system is stable if the point of coordinates,0 is encircled one time in counterclocwise sense: > > >. The system is stable for >. < 0 > 0 9

10 counterclocwise ω0 ω± ω 0

11 . The open loop system is stable. s ( s + ) + 0 H( jω) G( jω) H jω G jω jω ( jω + ) + 0 c. H( s) G( s) ω + ω + 0 ω ω 0 log H( jω) G( jω) 0 log + 0 log + 0 ω arg{ H( jω) G( jω) } arctg ( ω) arctg 0 < 0 >. > The sense of rotation of the hodograph isn t counterclocwise the point shouldn t be encircled.,0

12 counterclocwise ω ω0 ω0 ω H s G s s p, ±. The open loop system is unstable. s H( jω ) G( jω) Re { H( jω) G( jω) }; Im{ H( jω) G( jω )} 0 ω ω + d. ω 0 Re H jω G jω - -/ 0 { } Sensul e antiorar ω0 ω ω

13 The open loop system has a pole in the right half plane; the closed loop system is stable if the critical point is encircled one time in counter-clocwise: < < 0 > H s G s H( jω) G( jω) + + e. ( s ) ( jω ) ( ω) ( ω) + H jω G jω H j G j ω 0log 0log + ω arg H jω G jω arctg ω { } The open loop system is stable, therefore the critical point shouldn t be encircled: 0 sau 0 sau 0 < > > < < > 3

14 Counterclocwise ω0 ω0 ω H s G s H( jω) G( jω) + + f. ( s ) ( ω) ( ω) H j G j ( jω ) 3 3 ( + ω ) arg 3 ω 0log H( jω) G( jω) 0log + { H( jω ) G( jω) } 3arctg ( ω). Counterclocwise sense or 0 or 8,8, 0 > < 8 < < < 3 4

15 Counterclocwise ω 3 Re-/8 ω ω0 ω g. homewor. s + h. H( s) G( s) s p, ± Re{ sp} > 0 s 4 The open loop system is unstable. jω + H( jω) G( jω) Re { H( jω) G( jω) }, ω 4 ω + 4 ω Im{ H( jω) G( jω) } ω + 4 Re H j G j Im H jω G jω { } { } ω ( ω) ( ω ) /5 -/5 0 0 The system is stable for < < 0 > 4 and > 0 >

16 Counter clocwise ω0 ω ω i. H( s) G( s) s p, j Re{ sp,} 0 s + s+ ± < It results the open loop system is stable. ( ω) ( ω) H j G j Re ω jω ω jω 4 ω + jω+ + 4ω 4+ ω ω 4 4 ω ( ω ) { } 4 { H( jω) G( jω) } ; Im H( jω) G( jω) + ω 0 { } { } Re H jω G jω / 0 0 Im H jω G jω 0 /6 0 < 0 sau > > 0 sau > (, ) ω 4 + ω 6

17 Counter-clocwise ω ω0 ω 7

Class 13 Frequency domain analysis

Class 13 Frequency domain analysis Class 13 Frequency domain analysis The frequency response is the output of the system in steady state when the input of the system is sinusoidal Methods of system analysis by the frequency response, as

More information

Nyquist Criterion For Stability of Closed Loop System

Nyquist Criterion For Stability of Closed Loop System Nyquist Criterion For Stability of Closed Loop System Prof. N. Puri ECE Department, Rutgers University Nyquist Theorem Given a closed loop system: r(t) + KG(s) = K N(s) c(t) H(s) = KG(s) +KG(s) = KN(s)

More information

NAME: ht () 1 2π. Hj0 ( ) dω Find the value of BW for the system having the following impulse response.

NAME: ht () 1 2π. Hj0 ( ) dω Find the value of BW for the system having the following impulse response. University of California at Berkeley Department of Electrical Engineering and Computer Sciences Professor J. M. Kahn, EECS 120, Fall 1998 Final Examination, Wednesday, December 16, 1998, 5-8 pm NAME: 1.

More information

GATE EE Topic wise Questions SIGNALS & SYSTEMS

GATE EE Topic wise Questions SIGNALS & SYSTEMS www.gatehelp.com GATE EE Topic wise Questions YEAR 010 ONE MARK Question. 1 For the system /( s + 1), the approximate time taken for a step response to reach 98% of the final value is (A) 1 s (B) s (C)

More information

r + - FINAL June 12, 2012 MAE 143B Linear Control Prof. M. Krstic

r + - FINAL June 12, 2012 MAE 143B Linear Control Prof. M. Krstic MAE 43B Linear Control Prof. M. Krstic FINAL June, One sheet of hand-written notes (two pages). Present your reasoning and calculations clearly. Inconsistent etchings will not be graded. Write answers

More information

Outline. Control systems. Lecture-4 Stability. V. Sankaranarayanan. V. Sankaranarayanan Control system

Outline. Control systems. Lecture-4 Stability. V. Sankaranarayanan. V. Sankaranarayanan Control system Outline Control systems Lecture-4 Stability V. Sankaranarayanan Outline Outline 1 Outline Outline 1 2 Concept of Stability Zero State Response: The zero-state response is due to the input only; all the

More information

Systems Analysis and Control

Systems Analysis and Control Systems Analysis and Control Matthew M. Peet Illinois Institute of Technology Lecture 22: The Nyquist Criterion Overview In this Lecture, you will learn: Complex Analysis The Argument Principle The Contour

More information

Time Response Analysis (Part II)

Time Response Analysis (Part II) Time Response Analysis (Part II). A critically damped, continuous-time, second order system, when sampled, will have (in Z domain) (a) A simple pole (b) Double pole on real axis (c) Double pole on imaginary

More information

Some solutions of the written exam of January 27th, 2014

Some solutions of the written exam of January 27th, 2014 TEORIA DEI SISTEMI Systems Theory) Prof. C. Manes, Prof. A. Germani Some solutions of the written exam of January 7th, 0 Problem. Consider a feedback control system with unit feedback gain, with the following

More information

The Nyquist criterion relates the stability of a closed system to the open-loop frequency response and open loop pole location.

The Nyquist criterion relates the stability of a closed system to the open-loop frequency response and open loop pole location. Introduction to the Nyquist criterion The Nyquist criterion relates the stability of a closed system to the open-loop frequency response and open loop pole location. Mapping. If we take a complex number

More information

LTI Systems (Continuous & Discrete) - Basics

LTI Systems (Continuous & Discrete) - Basics LTI Systems (Continuous & Discrete) - Basics 1. A system with an input x(t) and output y(t) is described by the relation: y(t) = t. x(t). This system is (a) linear and time-invariant (b) linear and time-varying

More information

Control Systems I. Lecture 9: The Nyquist condition

Control Systems I. Lecture 9: The Nyquist condition Control Systems I Lecture 9: The Nyquist condition Readings: Åstrom and Murray, Chapter 9.1 4 www.cds.caltech.edu/~murray/amwiki/index.php/first_edition Jacopo Tani Institute for Dynamic Systems and Control

More information

Systems Analysis and Control

Systems Analysis and Control Systems Analysis and Control Matthew M. Peet Illinois Institute of Technology Lecture 23: Drawing The Nyquist Plot Overview In this Lecture, you will learn: Review of Nyquist Drawing the Nyquist Plot Using

More information

The Johns Hopkins University Department of Electrical and Computer Engineering Introduction to Linear Systems Fall 2002.

The Johns Hopkins University Department of Electrical and Computer Engineering Introduction to Linear Systems Fall 2002. The Johns Hopkins University Department of Electrical and Computer Engineering 505.460 Introduction to Linear Systems Fall 2002 Final exam Name: You are allowed to use: 1. Table 3.1 (page 206) & Table

More information

Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam!

Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Prüfung Regelungstechnik I (Control Systems I) Prof. Dr. Lino Guzzella 3.. 24 Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Do not mark up this translation aid -

More information

STABILITY ANALYSIS. Asystemmaybe stable, neutrallyormarginallystable, or unstable. This can be illustrated using cones: Stable Neutral Unstable

STABILITY ANALYSIS. Asystemmaybe stable, neutrallyormarginallystable, or unstable. This can be illustrated using cones: Stable Neutral Unstable ECE4510/5510: Feedback Control Systems. 5 1 STABILITY ANALYSIS 5.1: Bounded-input bounded-output (BIBO) stability Asystemmaybe stable, neutrallyormarginallystable, or unstable. This can be illustrated

More information

Design Methods for Control Systems

Design Methods for Control Systems Design Methods for Control Systems Maarten Steinbuch TU/e Gjerrit Meinsma UT Dutch Institute of Systems and Control Winter term 2002-2003 Schedule November 25 MSt December 2 MSt Homework # 1 December 9

More information

ECE317 : Feedback and Control

ECE317 : Feedback and Control ECE317 : Feedback and Control Lecture : Routh-Hurwitz stability criterion Examples Dr. Richard Tymerski Dept. of Electrical and Computer Engineering Portland State University 1 Course roadmap Modeling

More information

Digital Signal Processing. Midterm 1 Solution

Digital Signal Processing. Midterm 1 Solution EE 123 University of California, Berkeley Anant Sahai February 15, 27 Digital Signal Processing Instructions Midterm 1 Solution Total time allowed for the exam is 8 minutes Some useful formulas: Discrete

More information

Controls Problems for Qualifying Exam - Spring 2014

Controls Problems for Qualifying Exam - Spring 2014 Controls Problems for Qualifying Exam - Spring 2014 Problem 1 Consider the system block diagram given in Figure 1. Find the overall transfer function T(s) = C(s)/R(s). Note that this transfer function

More information

Like bilateral Laplace transforms, ROC must be used to determine a unique inverse z-transform.

Like bilateral Laplace transforms, ROC must be used to determine a unique inverse z-transform. Inversion of the z-transform Focus on rational z-transform of z 1. Apply partial fraction expansion. Like bilateral Laplace transforms, ROC must be used to determine a unique inverse z-transform. Let X(z)

More information

K(s +2) s +20 K (s + 10)(s +1) 2. (c) KG(s) = K(s + 10)(s +1) (s + 100)(s +5) 3. Solution : (a) KG(s) = s +20 = K s s

K(s +2) s +20 K (s + 10)(s +1) 2. (c) KG(s) = K(s + 10)(s +1) (s + 100)(s +5) 3. Solution : (a) KG(s) = s +20 = K s s 321 16. Determine the range of K for which each of the following systems is stable by making a Bode plot for K = 1 and imagining the magnitude plot sliding up or down until instability results. Verify

More information

H(s) = s. a 2. H eq (z) = z z. G(s) a 2. G(s) A B. s 2 s(s + a) 2 s(s a) G(s) 1 a 1 a. } = (z s 1)( z. e ) ) (z. (z 1)(z e at )(z e at )

H(s) = s. a 2. H eq (z) = z z. G(s) a 2. G(s) A B. s 2 s(s + a) 2 s(s a) G(s) 1 a 1 a. } = (z s 1)( z. e ) ) (z. (z 1)(z e at )(z e at ) .7 Quiz Solutions Problem : a H(s) = s a a) Calculate the zero order hold equivalent H eq (z). H eq (z) = z z G(s) Z{ } s G(s) a Z{ } = Z{ s s(s a ) } G(s) A B Z{ } = Z{ + } s s(s + a) s(s a) G(s) a a

More information

Frequency methods for the analysis of feedback systems. Lecture 6. Loop analysis of feedback systems. Nyquist approach to study stability

Frequency methods for the analysis of feedback systems. Lecture 6. Loop analysis of feedback systems. Nyquist approach to study stability Lecture 6. Loop analysis of feedback systems 1. Motivation 2. Graphical representation of frequency response: Bode and Nyquist curves 3. Nyquist stability theorem 4. Stability margins Frequency methods

More information

Grades will be determined by the correctness of your answers (explanations are not required).

Grades will be determined by the correctness of your answers (explanations are not required). 6.00 (Fall 20) Final Examination December 9, 20 Name: Kerberos Username: Please circle your section number: Section Time 2 am pm 4 2 pm Grades will be determined by the correctness of your answers (explanations

More information

Analysis of Discrete-Time Systems

Analysis of Discrete-Time Systems TU Berlin Discrete-Time Control Systems 1 Analysis of Discrete-Time Systems Overview Stability Sensitivity and Robustness Controllability, Reachability, Observability, and Detectabiliy TU Berlin Discrete-Time

More information

Return Difference Function and Closed-Loop Roots Single-Input/Single-Output Control Systems

Return Difference Function and Closed-Loop Roots Single-Input/Single-Output Control Systems Spectral Properties of Linear- Quadratic Regulators Robert Stengel Optimal Control and Estimation MAE 546 Princeton University, 2018! Stability margins of single-input/singleoutput (SISO) systems! Characterizations

More information

Grades will be determined by the correctness of your answers (explanations are not required).

Grades will be determined by the correctness of your answers (explanations are not required). 6.00 (Fall 2011) Final Examination December 19, 2011 Name: Kerberos Username: Please circle your section number: Section Time 2 11 am 1 pm 4 2 pm Grades will be determined by the correctness of your answers

More information

Introduction to Nonlinear Control Lecture # 4 Passivity

Introduction to Nonlinear Control Lecture # 4 Passivity p. 1/6 Introduction to Nonlinear Control Lecture # 4 Passivity È p. 2/6 Memoryless Functions ¹ y È Ý Ù È È È È u (b) µ power inflow = uy Resistor is passive if uy 0 p. 3/6 y y y u u u (a) (b) (c) Passive

More information

6.302 Feedback Systems Recitation 0: Nyquist Stability Prof. Joel L. Dawson

6.302 Feedback Systems Recitation 0: Nyquist Stability Prof. Joel L. Dawson 6.302 Feedbac Systems Today s theme is going to be examples of using the Nyquist Stability Criterion. We re going to be counting encirclements of the -/ point. But first, we must be precise about how we

More information

6.003 Homework #6 Solutions

6.003 Homework #6 Solutions 6.3 Homework #6 Solutions Problems. Maximum gain For each of the following systems, find the frequency ω m for which the magnitude of the gain is greatest. a. + s + s ω m = w This system has poles at s

More information

ECE301 Fall, 2006 Exam 1 Soluation October 7, Name: Score: / Consider the system described by the differential equation

ECE301 Fall, 2006 Exam 1 Soluation October 7, Name: Score: / Consider the system described by the differential equation ECE301 Fall, 2006 Exam 1 Soluation October 7, 2006 1 Name: Score: /100 You must show all of your work for full credit. Calculators may NOT be used. 1. Consider the system described by the differential

More information

ROOT LOCUS. Consider the system. Root locus presents the poles of the closed-loop system when the gain K changes from 0 to. H(s) H ( s) = ( s)

ROOT LOCUS. Consider the system. Root locus presents the poles of the closed-loop system when the gain K changes from 0 to. H(s) H ( s) = ( s) C1 ROOT LOCUS Consider the system R(s) E(s) C(s) + K G(s) - H(s) C(s) R(s) = K G(s) 1 + K G(s) H(s) Root locus presents the poles of the closed-loop system when the gain K changes from 0 to 1+ K G ( s)

More information

6.302 Feedback Systems Recitation 27: Final Recitation and Review Prof. Joel L. Dawson

6.302 Feedback Systems Recitation 27: Final Recitation and Review Prof. Joel L. Dawson 6.302 Feedbac Systems We re going to spend some time in this recitation revisiting some of the very early examples of recitation #1. To aid us in this review, the final class exercise involves exploring

More information

Solutions: Homework Set # 5

Solutions: Homework Set # 5 Signal Processing for Communications EPFL Winter Semester 2007/2008 Prof. Suhas Diggavi Handout # 22, Tuesday, November, 2007 Solutions: Homework Set # 5 Problem (a) Since h [n] = 0, we have (b) We can

More information

ECE 350 Signals and Systems Spring 2011 Final Exam - Solutions. Three 8 ½ x 11 sheets of notes, and a calculator are allowed during the exam.

ECE 350 Signals and Systems Spring 2011 Final Exam - Solutions. Three 8 ½ x 11 sheets of notes, and a calculator are allowed during the exam. ECE 35 Spring - Final Exam 9 May ECE 35 Signals and Systems Spring Final Exam - Solutions Three 8 ½ x sheets of notes, and a calculator are allowed during the exam Write all answers neatly and show your

More information

Outline. Classical Control. Lecture 1

Outline. Classical Control. Lecture 1 Outline Outline Outline 1 Introduction 2 Prerequisites Block diagram for system modeling Modeling Mechanical Electrical Outline Introduction Background Basic Systems Models/Transfers functions 1 Introduction

More information

Frequency domain analysis

Frequency domain analysis Automatic Control 2 Frequency domain analysis Prof. Alberto Bemporad University of Trento Academic year 2010-2011 Prof. Alberto Bemporad (University of Trento) Automatic Control 2 Academic year 2010-2011

More information

Introduction. Performance and Robustness (Chapter 1) Advanced Control Systems Spring / 31

Introduction. Performance and Robustness (Chapter 1) Advanced Control Systems Spring / 31 Introduction Classical Control Robust Control u(t) y(t) G u(t) G + y(t) G : nominal model G = G + : plant uncertainty Uncertainty sources : Structured : parametric uncertainty, multimodel uncertainty Unstructured

More information

STABILITY ANALYSIS TECHNIQUES

STABILITY ANALYSIS TECHNIQUES ECE4540/5540: Digital Control Systems 4 1 STABILITY ANALYSIS TECHNIQUES 41: Bilinear transformation Three main aspects to control-system design: 1 Stability, 2 Steady-state response, 3 Transient response

More information

Analysis of Discrete-Time Systems

Analysis of Discrete-Time Systems TU Berlin Discrete-Time Control Systems TU Berlin Discrete-Time Control Systems 2 Stability Definitions We define stability first with respect to changes in the initial conditions Analysis of Discrete-Time

More information

GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING FINAL EXAM. COURSE: ECE 3084A (Prof. Michaels)

GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING FINAL EXAM. COURSE: ECE 3084A (Prof. Michaels) GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING FINAL EXAM DATE: 30-Apr-14 COURSE: ECE 3084A (Prof. Michaels) NAME: STUDENT #: LAST, FIRST Write your name on the front page

More information

Control Systems. Frequency Method Nyquist Analysis.

Control Systems. Frequency Method Nyquist Analysis. Frequency Method Nyquist Analysis chibum@seoultech.ac.kr Outline Polar plots Nyquist plots Factors of polar plots PolarNyquist Plots Polar plot: he locus of the magnitude of ω vs. the phase of ω on polar

More information

Software Engineering/Mechatronics 3DX4. Slides 6: Stability

Software Engineering/Mechatronics 3DX4. Slides 6: Stability Software Engineering/Mechatronics 3DX4 Slides 6: Stability Dr. Ryan Leduc Department of Computing and Software McMaster University Material based on lecture notes by P. Taylor and M. Lawford, and Control

More information

Data Based Design of 3Term Controllers. Data Based Design of 3 Term Controllers p. 1/10

Data Based Design of 3Term Controllers. Data Based Design of 3 Term Controllers p. 1/10 Data Based Design of 3Term Controllers Data Based Design of 3 Term Controllers p. 1/10 Data Based Design of 3 Term Controllers p. 2/10 History Classical Control - single controller (PID, lead/lag) is designed

More information

DESIGN USING TRANSFORMATION TECHNIQUE CLASSICAL METHOD

DESIGN USING TRANSFORMATION TECHNIQUE CLASSICAL METHOD 206 Spring Semester ELEC733 Digital Control System LECTURE 7: DESIGN USING TRANSFORMATION TECHNIQUE CLASSICAL METHOD For a unit ramp input Tz Ez ( ) 2 ( z ) D( z) G( z) Tz e( ) lim( z) z 2 ( z ) D( z)

More information

Andrea Zanchettin Automatic Control AUTOMATIC CONTROL. Andrea M. Zanchettin, PhD Spring Semester, Linear systems (frequency domain)

Andrea Zanchettin Automatic Control AUTOMATIC CONTROL. Andrea M. Zanchettin, PhD Spring Semester, Linear systems (frequency domain) 1 AUTOMATIC CONTROL Andrea M. Zanchettin, PhD Spring Semester, 2018 Linear systems (frequency domain) 2 Motivations Consider an LTI system Thanks to the Lagrange s formula we can compute the motion of

More information

ECE 486 Control Systems

ECE 486 Control Systems ECE 486 Control Systems Spring 208 Midterm #2 Information Issued: April 5, 208 Updated: April 8, 208 ˆ This document is an info sheet about the second exam of ECE 486, Spring 208. ˆ Please read the following

More information

Lecture 8 - IIR Filters (II)

Lecture 8 - IIR Filters (II) Lecture 8 - IIR Filters (II) James Barnes (James.Barnes@colostate.edu) Spring 2009 Colorado State University Dept of Electrical and Computer Engineering ECE423 1 / 27 Lecture 8 Outline Introduction Digital

More information

Module 4. Related web links and videos. 1. FT and ZT

Module 4. Related web links and videos. 1.  FT and ZT Module 4 Laplace transforms, ROC, rational systems, Z transform, properties of LT and ZT, rational functions, system properties from ROC, inverse transforms Related web links and videos Sl no Web link

More information

DESIGN OF CMOS ANALOG INTEGRATED CIRCUITS

DESIGN OF CMOS ANALOG INTEGRATED CIRCUITS DESIGN OF CMOS ANALOG INEGRAED CIRCUIS Franco Maloberti Integrated Microsistems Laboratory University of Pavia Discrete ime Signal Processing F. Maloberti: Design of CMOS Analog Integrated Circuits Discrete

More information

MAS107 Control Theory Exam Solutions 2008

MAS107 Control Theory Exam Solutions 2008 MAS07 CONTROL THEORY. HOVLAND: EXAM SOLUTION 2008 MAS07 Control Theory Exam Solutions 2008 Geir Hovland, Mechatronics Group, Grimstad, Norway June 30, 2008 C. Repeat question B, but plot the phase curve

More information

Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam!

Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Prüfung Regelungstechnik I (Control Systems I) Prof. Dr. Lino Guzzella 9. 8. 2 Übersetzungshilfe / Translation aid (English) To be returned at the end of the exam! Do not mark up this translation aid -

More information

GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING FINAL EXAM. COURSE: ECE 3084A (Prof. Michaels)

GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING FINAL EXAM. COURSE: ECE 3084A (Prof. Michaels) GEORGIA INSTITUTE OF TECHNOLOGY SCHOOL of ELECTRICAL & COMPUTER ENGINEERING FINAL EXAM DATE: 09-Dec-13 COURSE: ECE 3084A (Prof. Michaels) NAME: STUDENT #: LAST, FIRST Write your name on the front page

More information

EE Control Systems LECTURE 9

EE Control Systems LECTURE 9 Updated: Sunday, February, 999 EE - Control Systems LECTURE 9 Copyright FL Lewis 998 All rights reserved STABILITY OF LINEAR SYSTEMS We discuss the stability of input/output systems and of state-space

More information

EE 380. Linear Control Systems. Lecture 10

EE 380. Linear Control Systems. Lecture 10 EE 380 Linear Control Systems Lecture 10 Professor Jeffrey Schiano Department of Electrical Engineering Lecture 10. 1 Lecture 10 Topics Stability Definitions Methods for Determining Stability Lecture 10.

More information

Nonlinear Control. Nonlinear Control Lecture # 18 Stability of Feedback Systems

Nonlinear Control. Nonlinear Control Lecture # 18 Stability of Feedback Systems Nonlinear Control Lecture # 18 Stability of Feedback Systems Absolute Stability + r = 0 u y G(s) ψ( ) Definition 7.1 The system is absolutely stable if the origin is globally uniformly asymptotically stable

More information

1 (20 pts) Nyquist Exercise

1 (20 pts) Nyquist Exercise EE C128 / ME134 Problem Set 6 Solution Fall 2011 1 (20 pts) Nyquist Exercise Consider a close loop system with unity feedback. For each G(s), hand sketch the Nyquist diagram, determine Z = P N, algebraically

More information

ELEG 305: Digital Signal Processing

ELEG 305: Digital Signal Processing ELEG 305: Digital Signal Processing Lecture : Design of Digital IIR Filters (Part I) Kenneth E. Barner Department of Electrical and Computer Engineering University of Delaware Fall 008 K. E. Barner (Univ.

More information

EE Homework 5 - Solutions

EE Homework 5 - Solutions EE054 - Homework 5 - Solutions 1. We know the general result that the -transform of α n 1 u[n] is with 1 α 1 ROC α < < and the -transform of α n 1 u[ n 1] is 1 α 1 with ROC 0 < α. Using this result, the

More information

FATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY

FATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY FATIMA MICHAEL COLLEGE OF ENGINEERING & TECHNOLOGY Senkottai Village, Madurai Sivagangai Main Road, Madurai - 625 020. An ISO 9001:2008 Certified Institution DEPARTMENT OF ELECTRONICS AND COMMUNICATION

More information

Stability Condition in Terms of the Pole Locations

Stability Condition in Terms of the Pole Locations Stability Condition in Terms of the Pole Locations A causal LTI digital filter is BIBO stable if and only if its impulse response h[n] is absolutely summable, i.e., 1 = S h [ n] < n= We now develop a stability

More information

Analysis of SISO Control Loops

Analysis of SISO Control Loops Chapter 5 Analysis of SISO Control Loops Topics to be covered For a given controller and plant connected in feedback we ask and answer the following questions: Is the loop stable? What are the sensitivities

More information

Chapter 3 Convolution Representation

Chapter 3 Convolution Representation Chapter 3 Convolution Representation DT Unit-Impulse Response Consider the DT SISO system: xn [ ] System yn [ ] xn [ ] = δ[ n] If the input signal is and the system has no energy at n = 0, the output yn

More information

Course roadmap. Step response for 2nd-order system. Step response for 2nd-order system

Course roadmap. Step response for 2nd-order system. Step response for 2nd-order system ME45: Control Systems Lecture Time response of nd-order systems Prof. Clar Radcliffe and Prof. Jongeun Choi Department of Mechanical Engineering Michigan State University Modeling Laplace transform Transfer

More information

Time Response of Systems

Time Response of Systems Chapter 0 Time Response of Systems 0. Some Standard Time Responses Let us try to get some impulse time responses just by inspection: Poles F (s) f(t) s-plane Time response p =0 s p =0,p 2 =0 s 2 t p =

More information

INTRODUCTION TO DIGITAL CONTROL

INTRODUCTION TO DIGITAL CONTROL ECE4540/5540: Digital Control Systems INTRODUCTION TO DIGITAL CONTROL.: Introduction In ECE450/ECE550 Feedback Control Systems, welearnedhow to make an analog controller D(s) to control a linear-time-invariant

More information

Course Outline. Closed Loop Stability. Stability. Amme 3500 : System Dynamics & Control. Nyquist Stability. Dr. Dunant Halim

Course Outline. Closed Loop Stability. Stability. Amme 3500 : System Dynamics & Control. Nyquist Stability. Dr. Dunant Halim Amme 3 : System Dynamics & Control Nyquist Stability Dr. Dunant Halim Course Outline Week Date Content Assignment Notes 1 5 Mar Introduction 2 12 Mar Frequency Domain Modelling 3 19 Mar System Response

More information

Chapter 6 - Solved Problems

Chapter 6 - Solved Problems Chapter 6 - Solved Problems Solved Problem 6.. Contributed by - James Welsh, University of Newcastle, Australia. Find suitable values for the PID parameters using the Z-N tuning strategy for the nominal

More information

6.003 (Fall 2011) Quiz #3 November 16, 2011

6.003 (Fall 2011) Quiz #3 November 16, 2011 6.003 (Fall 2011) Quiz #3 November 16, 2011 Name: Kerberos Username: Please circle your section number: Section Time 2 11 am 3 1 pm 4 2 pm Grades will be determined by the correctness of your answers (explanations

More information

Linear systems, small signals, and integrators

Linear systems, small signals, and integrators Linear systems, small signals, and integrators CNS WS05 Class Giacomo Indiveri Institute of Neuroinformatics University ETH Zurich Zurich, December 2005 Outline 1 Linear Systems Crash Course Linear Time-Invariant

More information

Review: transient and steady-state response; DC gain and the FVT Today s topic: system-modeling diagrams; prototype 2nd-order system

Review: transient and steady-state response; DC gain and the FVT Today s topic: system-modeling diagrams; prototype 2nd-order system Plan of the Lecture Review: transient and steady-state response; DC gain and the FVT Today s topic: system-modeling diagrams; prototype 2nd-order system Plan of the Lecture Review: transient and steady-state

More information

Module 4 : Laplace and Z Transform Problem Set 4

Module 4 : Laplace and Z Transform Problem Set 4 Module 4 : Laplace and Z Transform Problem Set 4 Problem 1 The input x(t) and output y(t) of a causal LTI system are related to the block diagram representation shown in the figure. (a) Determine a differential

More information

Systems Analysis and Control

Systems Analysis and Control Systems Analysis and Control Matthew M. Peet Arizona State University Lecture 23: Drawing The Nyquist Plot Overview In this Lecture, you will learn: Review of Nyquist Drawing the Nyquist Plot Using the

More information

Theory of Machines and Automatic Control Winter 2018/2019

Theory of Machines and Automatic Control Winter 2018/2019 Theory of Machines and Automatic Control Winter 2018/2019 Lecturer: Sebastian Korczak, PhD, Eng. Institute of Machine Design Fundamentals - Department of Mechanics http://www.ipbm.simr.pw.edu.pl/ Lecture

More information

Stability Analysis Techniques

Stability Analysis Techniques Stability Analysis Techniques In this section the stability analysis techniques for the Linear Time-Invarient (LTI) discrete system are emphasized. In general the stability techniques applicable to LTI

More information

Lecture 2 OKAN UNIVERSITY FACULTY OF ENGINEERING AND ARCHITECTURE

Lecture 2 OKAN UNIVERSITY FACULTY OF ENGINEERING AND ARCHITECTURE OKAN UNIVERSITY FACULTY OF ENGINEERING AND ARCHITECTURE EEE 43 DIGITAL SIGNAL PROCESSING (DSP) 2 DIFFERENCE EQUATIONS AND THE Z- TRANSFORM FALL 22 Yrd. Doç. Dr. Didem Kivanc Tureli didemk@ieee.org didem.kivanc@okan.edu.tr

More information

Introduction & Laplace Transforms Lectures 1 & 2

Introduction & Laplace Transforms Lectures 1 & 2 Introduction & Lectures 1 & 2, Professor Department of Electrical and Computer Engineering Colorado State University Fall 2016 Control System Definition of a Control System Group of components that collectively

More information

10 Transfer Matrix Models

10 Transfer Matrix Models MIT EECS 6.241 (FALL 26) LECTURE NOTES BY A. MEGRETSKI 1 Transfer Matrix Models So far, transfer matrices were introduced for finite order state space LTI models, in which case they serve as an important

More information

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING EXAMINATIONS 2010

DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING EXAMINATIONS 2010 [E2.5] IMPERIAL COLLEGE LONDON DEPARTMENT OF ELECTRICAL AND ELECTRONIC ENGINEERING EXAMINATIONS 2010 EEE/ISE PART II MEng. BEng and ACGI SIGNALS AND LINEAR SYSTEMS Time allowed: 2:00 hours There are FOUR

More information

Control Systems I. Lecture 9: The Nyquist condition

Control Systems I. Lecture 9: The Nyquist condition Control Systems I Lecture 9: The Nyquist condition adings: Guzzella, Chapter 9.4 6 Åstrom and Murray, Chapter 9.1 4 www.cds.caltech.edu/~murray/amwiki/index.php/first_edition Emilio Frazzoli Institute

More information

Lecture 5: Linear Systems. Transfer functions. Frequency Domain Analysis. Basic Control Design.

Lecture 5: Linear Systems. Transfer functions. Frequency Domain Analysis. Basic Control Design. ISS0031 Modeling and Identification Lecture 5: Linear Systems. Transfer functions. Frequency Domain Analysis. Basic Control Design. Aleksei Tepljakov, Ph.D. September 30, 2015 Linear Dynamic Systems Definition

More information

FREQUENCY RESPONSE ANALYSIS Closed Loop Frequency Response

FREQUENCY RESPONSE ANALYSIS Closed Loop Frequency Response Closed Loop Frequency Response The Bode plot is generally constructed for an open loop transfer function of a system. In order to draw the Bode plot for a closed loop system, the transfer function has

More information

1 Controller Optimization according to the Modulus Optimum

1 Controller Optimization according to the Modulus Optimum Controller Optimization according to the Modulus Optimum w G K (s) F 0 (s) x The goal of applying a control loop usually is to get the control value x equal to the reference value w. x(t) w(t) X(s) W (s)

More information

Discrete Time Systems

Discrete Time Systems Discrete Time Systems Valentina Hubeika, Jan Černocký DCGM FIT BUT Brno, {ihubeika,cernocky}@fit.vutbr.cz 1 LTI systems In this course, we work only with linear and time-invariant systems. We talked about

More information

Automatique. A. Hably 1. Commande d un robot mobile. Automatique. A.Hably. Digital implementation

Automatique. A. Hably 1. Commande d un robot mobile. Automatique. A.Hably. Digital implementation A. Hably 1 1 Gipsa-lab, Grenoble-INP ahmad.hably@grenoble-inp.fr Commande d un robot mobile (Gipsa-lab (DA)) ASI 1 / 25 Outline 1 2 (Gipsa-lab (DA)) ASI 2 / 25 of controllers Signals must be sampled and

More information

STABILITY OF CLOSED-LOOP CONTOL SYSTEMS

STABILITY OF CLOSED-LOOP CONTOL SYSTEMS CHBE320 LECTURE X STABILITY OF CLOSED-LOOP CONTOL SYSTEMS Professor Dae Ryook Yang Spring 2018 Dept. of Chemical and Biological Engineering 10-1 Road Map of the Lecture X Stability of closed-loop control

More information

ECE 388 Automatic Control

ECE 388 Automatic Control Controllability and State Feedback Control Associate Prof. Dr. of Mechatronics Engineeering Çankaya University Compulsory Course in Electronic and Communication Engineering Credits (2/2/3) Course Webpage:

More information

Lecture 9 Infinite Impulse Response Filters

Lecture 9 Infinite Impulse Response Filters Lecture 9 Infinite Impulse Response Filters Outline 9 Infinite Impulse Response Filters 9 First-Order Low-Pass Filter 93 IIR Filter Design 5 93 CT Butterworth filter design 5 93 Bilinear transform 7 9

More information

Homework 7 - Solutions

Homework 7 - Solutions Homework 7 - Solutions Note: This homework is worth a total of 48 points. 1. Compensators (9 points) For a unity feedback system given below, with G(s) = K s(s + 5)(s + 11) do the following: (c) Find the

More information

ECE317 : Feedback and Control

ECE317 : Feedback and Control ECE317 : Feedback and Control Lecture : Stability Routh-Hurwitz stability criterion Dr. Richard Tymerski Dept. of Electrical and Computer Engineering Portland State University 1 Course roadmap Modeling

More information

New Mexico State University Klipsch School of Electrical Engineering EE312 - Signals and Systems I Fall 2015 Final Exam

New Mexico State University Klipsch School of Electrical Engineering EE312 - Signals and Systems I Fall 2015 Final Exam New Mexico State University Klipsch School of Electrical Engineering EE312 - Signals and Systems I Fall 2015 Name: Solve problems 1 3 and two from problems 4 7. Circle below which two of problems 4 7 you

More information

This homework will not be collected or graded. It is intended to help you practice for the final exam. Solutions will be posted.

This homework will not be collected or graded. It is intended to help you practice for the final exam. Solutions will be posted. 6.003 Homework #14 This homework will not be collected or graded. It is intended to help you practice for the final exam. Solutions will be posted. Problems 1. Neural signals The following figure illustrates

More information

Poles and Zeros in z-plane

Poles and Zeros in z-plane M58 Mixed Signal Processors page of 6 Poles and Zeros in z-plane z-plane Response of discrete-time system (i.e. digital filter at a particular frequency ω is determined by the distance between its poles

More information

Discrete Systems. Step response and pole locations. Mark Cannon. Hilary Term Lecture

Discrete Systems. Step response and pole locations. Mark Cannon. Hilary Term Lecture Discrete Systems Mark Cannon Hilary Term 22 - Lecture 4 Step response and pole locations 4 - Review Definition of -transform: U() = Z{u k } = u k k k= Discrete transfer function: Y () U() = G() = Z{g k},

More information

MAE 143B - Homework 9

MAE 143B - Homework 9 MAE 143B - Homework 9 7.1 a) We have stable first-order poles at p 1 = 1 and p 2 = 1. For small values of ω, we recover the DC gain K = lim ω G(jω) = 1 1 = 2dB. Having this finite limit, our straight-line

More information

2.161 Signal Processing: Continuous and Discrete Fall 2008

2.161 Signal Processing: Continuous and Discrete Fall 2008 MIT OpenCourseWare http://ocw.mit.edu 2.161 Signal Processing: Continuous and Discrete Fall 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. Massachusetts

More information

Lecture 8 - IIR Filters (II)

Lecture 8 - IIR Filters (II) Lecture 8 - IIR Filters (II) James Barnes (James.Barnes@colostate.edu) Spring 24 Colorado State University Dept of Electrical and Computer Engineering ECE423 1 / 29 Lecture 8 Outline Introduction Digital

More information

Control Systems Engineering ( Chapter 6. Stability ) Prof. Kwang-Chun Ho Tel: Fax:

Control Systems Engineering ( Chapter 6. Stability ) Prof. Kwang-Chun Ho Tel: Fax: Control Systems Engineering ( Chapter 6. Stability ) Prof. Kwang-Chun Ho kwangho@hansung.ac.kr Tel: 02-760-4253 Fax:02-760-4435 Introduction In this lesson, you will learn the following : How to determine

More information

(b) A unity feedback system is characterized by the transfer function. Design a suitable compensator to meet the following specifications:

(b) A unity feedback system is characterized by the transfer function. Design a suitable compensator to meet the following specifications: 1. (a) The open loop transfer function of a unity feedback control system is given by G(S) = K/S(1+0.1S)(1+S) (i) Determine the value of K so that the resonance peak M r of the system is equal to 1.4.

More information