Hyperfast Rectifier Features Hyperfastfast Recovery Time Low Forward Voltage Drop Low Leakage Current 75 C Operating Junction Temperature Dual Diode Center Tap 30ETH06 30ETH06S 30ETH06- t rr = 8ns typ. I F(AV) = 30Amp V R = 600V Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters Max Units V RRM Peak Repetitive Reverse Voltage 600 V I F(AV) Average Rectifier Forward Current @ T C = 3 C 30 A I FSM Non Repetitive Peak Surge Current @ T J = 5 C 00 T J, T STG Operating Junction and Storage Temperatures - 65 to 75 C Case Styles 30ETH06 30ETH06S 30ETH06- Base Cathode Base Cathode 3 Cathode Anode TO-0AC 3 N/C Anode D PAK N/C 3 Anode TO-6
Electrical Characteristics @ T J = 5 C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions V BR, V r Breakdown Voltage, 600 - - V I R = 0μA Blocking Voltage V F Forward Voltage -.0.6 V I F = 30A, T J = 5 C -.34.75 V I F = 30A, T J = 50 C I R Reverse Leakage Current - 0.3 50 μa V R = V R Rated - 60 500 μa T J = 50 C, V R = V R Rated C T Junction Capacitance - 33 - pf V R = 600V L S Series Inductance - 8.0 - nh Measured lead to lead 5mm from package body Dynamic Recovery Characteristics @ T J = 5 C (unless otherwise specified) Parameters Min Typ Max Units Test Conditions t rr Reverse Recovery Time - 8 35 ns I F =.0A, di F /dt = 50A/μs, V R = 30V - 3 - T J = 5 C 77 - T J = 5 C I RRM Peak Recovery Current - 3.5 - A T J = 5 C I F = 30A V R = 00V di F /dt = 00A/μs - 7.7 - T J = 5 C Q rr Reverse Recovery Charge - 65 - nc T J = 5 C - 345 - T J = 5 C Thermal - Mechanical Characteristics Parameters Min Typ Max Units T J Max. Junction Temperature Range - 65-75 C T Stg Max. Storage Temperature Range - 65-75 R thjc Thermal Resistance, Junction to Case Per Leg - 0.7. C/W R thja Thermal Resistance, Junction to Ambient Per Leg - - 70 R thcs Thermal Resistance, Case to Heatsink - 0. - Wt Weight -.0 - g - 0.07 - (oz) Mounting Torque 6.0 - Kg-cm Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 5.0 - lbf.in
Instantaneous Forward Current - I F (A) 00 0 T = 75 C J T = 50 C J T = 5 C J Reverse Current - I R (μa) Junction Capacitance - C T (pf) 00 0 0. 0.0 0.00 0.000 0 0 00 300 400 500 600 Reverse Voltage - V R (V) 00 0 Tj = 75 C 50 C 5 C 0 C 5 C Fig. - Typical Values Of Reverse Current Vs. Reverse Voltage T = 5 C J 0 0.5.5.5 3 3.5 Forward Voltage Drop - V FM (V) Fig. - Typical Forward Voltage Drop Characteristics 0 0 00 300 400 500 600 Reverse Voltage - V R (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Thermal Impedance Z thjc ( C/W) 0. 0.0 D = 0.50 D = 0.0 D = 0. D = 0.05 D = 0.0 D = 0.0 Single Pulse (Thermal Resistance) 0.00 0.0000 0.000 0.00 0.0 0. t, Rectangular Pulse Duration (Seconds) Fig. 4 - Max. Thermal Impedance Z thjc Characteristics P DM t t Notes:. Duty factor D = t/ t. Peak Tj = Pdm x ZthJC + Tc 3
Allowable Case Temperature ( C) 80 60 40 0 Square wave (D = 0.50) Rated Vr applied DC see note (3) 80 0 5 5 0 5 30 35 40 45 Average Forward Current - IF (A) (AV) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Average Power Loss ( Watts ) 90 80 70 60 50 40 30 0 RMS Limit DC D = 0.0 D = 0.0 D = 0.05 D = 0. D = 0. D = 0.5 0 0 5 5 0 5 30 35 40 45 Average Forward Current - IF (AV) (A) Fig. 6 - Forward Power Loss Characteristics 90 80 70 60 IF = 30 A IF = 5 A 0 00 800 V R= 00V T J = 5 C T J = 5 C IF = 30 A IF = 5 A trr ( ns ) 50 40 Qrr ( nc ) 600 30 400 0 V R = 00V T J = 5 C T J = 5 C 0 0 00 di F /dt (A/μs ) Fig. 7 - Typical Reverse Recovery vs. di F /dt 00 0 0 00 di F /dt (A/μs ) Fig. 8 - Typical Stored Charge vs. di F /dt (3) Formula used: T C = T J - (Pd + Pd REV ) x R thjc ; Pd = Forward Power Loss = I F(AV) x V FM @ (I F(AV) / D) (see Fig. 6); Pd REV = Inverse Power Loss = V R x I R ( - D); I R @ V R = rated V R 4
Reverse Recovery Circuit V R = 00V 0.0 Ω dif/dt F /dt ADJUST L = 70µH G D IRFP50 D.U.T. S Fig. 9- Reverse Recovery Parameter Test Circuit 3 0 I F t a t rr t b I RRM Q rr 4 0.5 I RRM di(rec)m/dt 5 0.75 I RRM di F f /dt. di F /dt - Rate of change of current through zero crossing. IRRM - Peak reverse recovery current 3. t rr - Reverse recovery time measured from zero crossing point of negative going I F to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Q rr - Area under curve defined by t rr and I RRM Q rr = t rr x I RRM 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. - Reverse Recovery Waveform and Definitions 5
Outline Table Conforms to JEDEC Outline TO-0AC Dimensions in millimeters and (inches) Conforms to JEDEC Outline D PAK Dimensions in millimeters and (inches) 6
Outline Table Conforms to JEDEC Outline TO-6 Dimensions in millimeters and (inches) Tape & Reel Information Dimensions in millimeters and (inches) 7
Part Marking Information TO-0AC EXAMPLE: THIS IS A 30ETH06 LOT CODE 789 ASSEMBLED ON WW 9, 00 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR = 00 WEEK 9 LINE C D PAK THIS IS A 30ETH06S LOT CODE 804 ASSEMBLED ON WW 0, 000 IN THE ASSEMBLY LINE "L" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 0 = 000 WEEK 0 LINE L EXAMPLE: TO-6 THIS IS A 30ETH06- LOT CODE 789 ASSEMBLED ON WW 9, 999 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR 9 = 999 WEEK 9 LINE C 8
Ordering Information Table Device Code 30 E T H 06 - TRL - 3 4 5 6 7 8 - Current Rating (30 = 30A) - E = Single Diode 3 - T = TO-0 4 - H = HyperFast Recovery 5 - Voltage Rating (06 = 600V) 6 - None = TO-0AC S = D Pak - = TO-6 Option FP = TO-0 FULLPACK 7 - None = Tube (50 pieces) TRL = Tape & Reel (Left Oriented - for D Pak only) TRR = Tape & Reel (Right Oriented - for D Pak only) 8 - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 33 Kansas St., El Segundo, California 9045, USA Tel: (3) 5-75 TAC Fax: (3) 5-7309 Visit us at for sales contact information. /06 9