90/10 COPPER NICKEL ALLOY EUCARO 10 OFFSHORE APPLICATIONS
|
|
- Ronald Joseph
- 5 years ago
- Views:
Transcription
1 0/ COPPER NICKEL ALLOY EUCARO OFFSHORE APPLICATIONS
2 2
3 W O R L D O F COPPER N I CK E L Eucaro TABLE OF CONTENTS Technical Information Page - Pipes Page Inner Flanges Page - Outer Flanges Page Solid Slip-On Flanges Page Weld Neck Flanges Page 11 - Slip-On Flanes Page Blind Flanges Page 1 Elbows LR Page 1 Tee Pieces, equal + reduced Page - Reducer, ecc. + conc. Page Saddles Page 2 End Caps Page 2 Welding Outlet Page Socket Outlet Page 2 Threaded Outlet Page 2 Capilary or socket weld Fittings Page 2 - This brochure will inform you about our main products for Offshore applications. If you need more or other types please don't hesitate to contact us.
4 UNS 00 X Characteristics O O O O good welding and soldering properties good cold-workability good thermal stability (up to appro.0 C) resistant to stress corrosion Material-Comparisation of standards: Designation EEMUA BS DIN Eucaro UNS 00X CN Chemical composition Bezeichnung Cu Ni Fe Mn C* Pb* S* Zn* P* Zr Other Eucaro min. Rest,00 1, 0, ma. Rest 11,00 1,0 1,00 0,0 0,01 0,00 0,0 0,02 0,01 0, EEMUA 1-1 min. Rest,00 1, 0, UNS 00 ma. Rest 11,00 0 1,00 0,0 0,01 0,02 0, 0,02-0, BS 21 min. Rest,00 1,00 0, CN 2 ma. Rest 11,00 0 1,00 0,0 0,01 0, , DIN 01 min. Rest,00 1, 0, ma. Rest 11,00 1,0 1,00 0,0 0,01 0,00 0,0 0,02 0,0 0, EN min. Rest,00 1,00 0, CW 2 H ma. Rest 11,00 0 1,00 0,0 0,02 0,0 0,0 0,02-0, The reduced impurities (*) in Eucaro are an important factor in achieving considerably improved weldability.
5 PHYSICAL AND MECHANICAL PROPERTIES physical properties Eucaro Density ( C), kg/m³ 00 specific heat ( C), J/kg K melting range C Thermal conduktivity ( C), W / mk - Coeff. Of linear ep. ( 0 C), /K 1 Electrical resistance ( C, annealed), microohm cm 1 modules of elasticity ( C, annealed), GN/m² 1 mechanical properties Eucaro 0,2% proof stress (Rp 0,2), N/² min. tensile strength (Rm), N/² min. Elongation A% min. Vickershardness HV ma. 0 Dimensions: Dimensions of our products are in acc. to the valid national and international specifications. Other wall thicknesses as mentioned in. Our catalogue can be delivered also by stock. Special constructions will also be delivered on request, after checking of possibility of manufacturing.
6 PIPES - 1 / / bar UNS 00X Standard: EEMUA 1 Section 1/2 Seamless Pipe Nominal (in) Specified () 1 bar Specified Wall Thickness () T bar bar 1 bar Theoretical Weight / Metre (kg) bar bar 1/2 / 1 1 1/ 1 1/ /2 1,, 2, 1 1,0 1, 1, 1, 1, 1,,,0,0,0,0,,,,,0-0,2 0, 1, 1, 1,1 2,,1,0 11,00 21, 2,,,, 0, 1,2 1, 2, 2,,2,1,0,2, 2,,,0,0 0, 0, 1,2 1, 2, 2,,2,1,0,2 1,2 2 0,2 2, 0, - Seam-Welded Pipe ,2 11 1,0,,,0,,0,,,0,,,0, 1,0,0, 11,0 1 1,0 1,2, 1,2 11,0,0 2,,0, 0, 0,2 11,0 1, 2,0 2, 0,00 0,,2 11, 1, 21, 22,21,,
7 INNER FLANGES - bar UNS 00X Standard: EEMUA 1 Section 1 in Dimensions () d d d d Type S h1 Type L h1 h2 r1 r2 h S1 min. S2 1/2 / 1 1 1/ 1 1/ / ,, 2, 1,2 11 1,, 2, 1, , 1 1 1, ,00 21,00,00, 2, 1,2,0 2, 1, 211, 2,,,22 0,1 1, 0,,,,, , ,0,,,0,,,0, 1,,,,,,,0,0,0,0,,,0,0 1,,0 1,
8 INNER FLANGES - bar UNS 00X Standard: EEMUA 1 Section 1 in Dimensions () d d d d Type S h1 Type L h1 h2 r1 r2 h S1 min. S2 1/2 / 1 1 1/ 1 1/ / ,, 2, 1,2 11 1,, 2, 1, , 1 1 1, ,00 21,00,00, 2, 1,2,0 2,, 2,,, 1,00,,, 1,,, , ,,,0,0, 11,0 1 1,0 1,,,,,,,0,,0,,, 11,0 1 1, 21,0 2
9 OUTER FLANGES - / bar ASTM A normalised Standard: EEMUA 1 Section 1 Rating: Class 1 Dimensions () in D b min. in d2 / d K No. of Bolts e Appro. Total Weight incl. Inner Flanges - kg Bar S L bar S L 1/2 / 1 1 1/ 1 1/ / ,, 2, 1, / / / / / / / / / / / / 1 1/ 1 1/ 1 1/ 1 / 1 / 1 / 1 / 1, 1, 1, 1, 1, 22,2 22,2,, 2, 2, 1, 1,,, 1,1 1, ,,,,, 0,,, 10, 21, 2, 1,,2,,,0,,0, , 0, 1,0 1,2 1,,,,, 1,0 2,1,, 0,0,0, 1,, 2,0, 0, 0, 1,0 1,2 1, 2,,,,,, 2, 1,0, 0,, 1, 2, 2,, 0, 0, 1,0 1,2 1,,,,, 1,1 2,,2 0, 1, 2 1 0, 0, 1,0 1,2 1, 2,,,,, 1 2,,1,,, 1, 2,1 11,2,
10 SOLID FLANGES - / bar Inner Stub End - UNS 00X Backing Flange - ASTM A normalised Standard: EEMUA 1 Section 2 Rating: Class 1 Dimensions () in d1 Inner stub end dimension d d h1 h2 D Outer steel flange - dimension b K d d2 e No. of Bolt holes Appro. total weight (kg) 1/2 / 1 1 1/ 1 1/ /2,,,0,0,0,,0,2,,1, ,,,,, 0,,, 10, 2 1, 1, 1, 1, 1, ,1 0, 0,2 1,1 1, 2,2,,0
11 11 WELDING NECK FLANGES - bar UNS 00X Standard: EEMUA 1 Section Rating: Class 1 Dimensions () Outside Diam. of Flange D Thickn. if Flange b Diam. of Hub d Hub Dia at Weld Chamfer d Length through Hub h1 Bore of Flange d Thickn. of Hub at Welding End S1 min Parallel Length on Hub h2 Diam. of Bolt Circle K Diam. of Bolt Holes d2 1/2 / 1 1 1/ 1 1/ / ,, 2, 1, ,, 2, 1, ,00 21,00,00, 2, 1,2,0 2, 1, 211, 2,,,22 0,1 1, 0,,,,,,0,,,0,,,0, 1 0,,,,, 0,,, 10, 21, 2, 1,,2,,,0, , 1, 1, 1, 1, 22,2 22,2,, 2, 2, 1, 1,,, 1,1 1,1 0,2 1,0 1, 1, 2,,1,1,1,2 1 2,, 1,, 11,2,0, 2,,0 1,0 Drilling No. of Bolts - Appro. Weight kg - in
12 WELDING NECK FLANGES - bar UNS 00X Standard: EEMUA 1 Section Rating: Class 1 Dimensions () Outside Diam. of Flange D Thickn. if Flange b Diam. of Hub d Hub Dia at Weld Chamfer d Length through Hub h1 Bore of Flange d Thickn. of Hub at Welding End S1 min Parallel Length on Hub h2 Diam. of Bolt Circle K Diam. of Bolt Holes d2 1/2 / 1 1 1/ 1 1/ / ,, ,, 2, 1, ,00 21,00,00, 2, 1,2,0 2,, 2,,, 1,00,,, 1,,,,,,0,0, 11,0 1 1,0 1 0,,,,, 0,,, 10, 21, 2, 1,,2,,,0, , 1, 1, 1, 1, 22,2 22,2,, 2, 2, 1, 1,,, 1,1 1,1 0,2 1,0 1, 1, 2,,1,1,1,2 1, 2, 2,, 11,,,, 1,1 11,1, Drilling No. of Bolts - Appro. Weight kg - in
13 SLIP ON FLANGES - / bar UNS 00X Standard: EEMUA 1 Section Rating: Class 1 Dimensions () in Flange Diam. D d Flange Thickness b h d No. of bolt holes Diam. of bolt holes d2 K r Appro. Weight kg 1/2 / 1 1 1/ 1 1/ /2,, ,0,0,0,,0,2,,1, , 1, 1, 1, 1, 0,,,,, 0,,, 10, 0, 0,1 1, 1, 1,,,,2,
14 BLIND FLANGES - / bar Outer Flange - ASTM A normalized Disk - UNS 00X Rating: Class 1 Dimensions () in Flange Diam. D K Diameter of Bolts Holes d2 Flange Thickness b min Diam. of Disk d No. of Bolt Holes Appro. total Weight (kg) 1/2 / 1 1 1/ 1 1/ / ,, 2, 1, ,,,,, 0,,, 10, 21, 2, 1,,2,,,0,0,0,0 1, 1, 1, 1, 1, 22,2 22,2,, 2, 2, 1, 1,,, 1,1 1, ,2 1,0 1,1 1, 1,0 1,,0, 1, 2,0 1,2 0,,, 1, 11,00,,,, 1
15 ELBOWS - LR / bar UNS 00X Standard: EEMUA 1 Section 1 Dimensions () Nominal Specified Specified E-Centre to Face Appro. Weight (kg) Pipe Thickness T in bar bar bar bar bar bar 1 1 1/ 1 1/ / ,, 2, 1,2 11 1,0,,,0,,,0, 1,,,0,0, 11,0 1 1, , ,0 0,0 0,1 0, 0, 0, 1,00 2,, ,0 0,0 0,1 0, 0, 0, 1,00 2,, ,11 0,1 0, 0,2 0,0 1, 2,, 2 1 0,11 0,1 0, 0,2 0,0 1, 2,
16 TEE-PIECES - equal - / bar UNS 00X Standards: EEMUA 1 Section 1 Dimensions () Nominal in Specified Pipe Wall Thickness t bar bar a=b Appro. Weight (kg) bar bar 1 1 1/ 1 1/ / ,, 2, 1,2 11 1,0,,,0,,,0, 1,,,,0,0, 11,0 1 1, , 0, 0, 1,00 1,0 0,,00 11,, 0,00,00,00 0,00,00,00 0, 0, 0, 1,00 1,0 0,,,0 2,,,00 10,00 21,00,00,00 0,00,00
17 1 TEE-PIECES - reduced - bar UNS 00X Standard: EEMUA 1 Section 1 Dimensions () Specified Outlet b,0,0,0,,,,0,0,0,,, ,,,,,,,,,,,, ma min nom Centre - to - End () Run a ma min nom ,0,,,,,, Pipe Wall Thickness t
18 1 TEE-PIECES - reduced - bar UNS 00X Standards: EEMUA 1 Section 1 Dimensions () Specified Outlet b,,,,0,0,0,,,,,,,0,0,0,,, 1 1 1,,,,0,0,0,,,,,,,0,0,0,,, , 2, 2, 1 1 1,2,2, , 2, 2, 1 1 1,2,2, ma min nom Centre - to - End () Run a ma min nom,,0,,0,,,,0,,,0,,,0,0,,,,0, 2, 2, 1 2,,2 1,2 1, Pipe Wall Thickness t
19 1 TEE-PIECES - reduced - bar UNS 00X Standard: EEMUA 1 Section 1 Dimensions () Specified Outlet b,0,0,0,,,,0,0,0,,, ,,,,,,,,,,,, ma min nom Centre - to - End () Run a ma min nom ,0,,,,,, Pipe Wall Thickness t
20 TEE-PIECES - reduced - bar UNS 00X Standards: EEMUA 1 Section 1 Dimensions () Specified Outlet b,,,,0,0,0,,,,,,,0,0,0,,, 1 1 1,,,,0,0,0,,,,,,,0,0,0,,, , 2, 2, 1 1 1,2,2, , 2, 2, 1 1 1,2,2, ma min nom Centre - to - End () Run a ma min nom,,0,,0,,,,0,,,0,,,0,0,,,,0, 2, 2, 1 2,,2 1,2 1, Pipe Wall Thickness t
21 REDUCERS - / bar UNS 00X Standard: EEMUA 1 Section 1 Dimensions () Specified Length H Specified Wall Thickness () t1 t bar bar Appro. Weight (kg) bar bar,,,,,,0,0,0,0,,, ,,,,,,,,,,,,, 2, 2, 2,,0,0,,,,, 0,0 0,0 0,11 0,1 0, 0,22 0,2 0,2 0,2 0,0 0, 0, 0, 0, 0,0 1, 1, 1, 1,1 2, 2,2,11,0,,1,,, 11, 0,0 0,0 0,11 0,1 0, 0,22 0,2 0,2 0,2 0,0 0, 0, 0, 0, 0,0 1,2 1, 1,2 1, 2, 2,,21, 2,1,,0, 21
22 22 REDUCERS - / bar UNS 00X Standards: EEMUA 1 Section 1 Dimensions () Specified Length H Specified Wall Thickness () t1 t bar bar Appro. Weight (kg) bar bar,,0,0,0,0,0,,0, 11,0, 11, ,0,,,,0,0,0,,,,,,,0,0,0,, 1 1 1,0,0,0,0,0,0,,, 11,0 11,0 11, ,0 1,0 1, ,2,2, ,0,,,,,,0,0,,0,,,,0 2, 2, 2, 1 1,2 1,2, ,,00,00,,00 1,00, 0 1,00 0 0, 1,00 1,00,00,00 0,00 21,00 1,2 1,, 2,, 2, 2,,,1 1,,01,2,2, 1,2 11,2 2, 2,2 0, 1
23 b SADDLES - / bar d UNS 00X Standard: EEMUA 1 Section L Dimensions () Nominal in Specified d b L Pipe Wall Thickness t bar bar r 1 1 1/ 1 1/ /2 1,, 2, ,0,,,,,0,
24 END CAPS - / bar UNS 00X Standards: EEMUA 1 Section 1 Dimensions () Nominal in Specified in t min bar h1 + h2 t min bar h1 + h2 Appro. Weight kg bar bar 1 1 1/ 1 1/ / ,, 2, 1,2 11 1,0,,,0,,,0, 1,0 1, 1, 2, 2,2 1, ,,,0,0, 11,0 1 1,0 1,0 1, 1, 2, 2,2 1, ,0 0,0 0,0 0,11 0,1 0,2 0,0 0,0,,,1, 1, 22,,2 1, 0, 2,2 0,0 0,0 0,0 0,11 0,1 0,2 0,0 0, 2,,1, 11,,,, 1, 1, 11,,2 2
25 WELDING OUTLET BUTT WELD BRANCH CONNECTORS - / bar UNS 00X Standard: EEMUA 1 Section Dimensions () Branch Tube Header Range A C Appro. Weight kg,,, 2, 1 to, to to, to to, to to, to, to to, to to to, to to to 21 to to 21 to 2 to 2 to to 1 to 1,,, 22,2 22,2,, 2,,,,,,,, 2,,2 0,,,,,, ,0 0,11 0,11 0,21 0, 0,2 0,2 0, 0, 0, 0, -1, 1,-1, 2,-2, 2,- 2,2, -2,1,-, 1-,0,-,0,0-2,1 1,0-,,0-0,
26 SOCKET OUTLET - / bar SOCKET WELD BRANCH CONNECTORS UNS 00X Standards: EEMUA 1 Section Dimensions () Branch Tube o.d. Header Range A nom a min. C Appro. Weight kg,, -, - 1 -, - 1 -, - 1-1, - 1-1,, 2, 2, 2,,,, 2,,,,2,2,1, ,0 0,0 0,0 0, 0, 0,21 0,1 0,1 0, 0, 0, 0,2 0,1 0,2 1, 2
27 THREADED OUTLET - / bar SELF REINFORCED BRANCH CONNECTOR-THREADED TYPE UNS 00X Standard: EEMUA 1 Section Dimensions () Branch Tube o.d. Header Range A nom a min. C Appro. Weight kg 1/2 1/2 / / / 1 1/2 2 -, - 1 -, - 1 -, , 2, 2,,, 2,,,2,1,, 1 1 1, 1, 1 1, ,0 0,0 0,1 0, 0, 0,1 0,0 0, 1,00 2
28 STRAIGHT COUPLINGS UNS 00X Fitting Length Socket Depth, 2 1 REDUCING COUPLINGS UNS 00X Fitting Length Socket Depth,,,,,
29 2 STRAIGHT FEMALE CONNECTOR UNS 00X Fitting Dimensions () Length Socket Depth /2" 1/2" 1/2" 1/2" /" /" /" /" 1" 1" 1" 1" 1 1/2" 1 1/2" 2" 2",,, in
30 UNS 00X STRAIGHT MALE CONNECTOR Fitting Dimensions () Length Socket Depth in /2" 1/2" 1/2" 1/2" /" /" /" /" 1" 1" 1" 1" 1 1/" 1 1/" 1 1/" 1 1/" 1 1/2" 1 1/2" 2" 2",,,,
31 REDUCING COUPLING for brazing and welding UNS 00X Dimensions () Fitting Length Socket Depth,,,,,
32 UNION CONNECTOR UNS 00X Dimensions () Fitting Length Socket Depth,, 1 2
33 ELBOW UNS 00X Dimensions () Fitting Socket Depth C to F, 2,, 2 1
34 CAPILLARY T-PIECE UNS 00X Fitting Socket Depth C to F, END CAP UNS 00X Fitting Length Socket Depth,
ProPress (304 FKM) 1.3
ProPress (304 FKM) 41 ProPress (304 FKM) Viega ProPress for stainless is engineered for harsh industrial environments where the piping systems may come into contact with corrosive cleaning liquids. A complete
More informationS E G N A L F E IP P
9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow
More informationaluminium bar extrusion tube sheet treadplate/plate technical information brass bar extrusion sheet technical information
A World of Metal contents 0 0 9 9 0 9 0 aluminium bar etrusion tube sheet treadplate/plate technical information brass bar etrusion sheet technical information copper bar etrusion tube sheet technical
More informationSpromak ltd YEARS OF EXCELLENCE
9 007 YEARS OF EXCELLENCE MANUFACTURERS OF FLANGED BUTTWELD OUTLET FLANGED NIPPLE OUTLET FLANGED LATERAL OUTLET FLANGED ELBOW OUTLET FLANGED INSERT OUTLET BUTTWELD OUTLETS SOCKETWELD OUTLETS THREADED OUTLETS
More informationARMYLOR PTFE / PFA LINED PIPES AND FITTINGS DIN 2848
ARMYLOR PTFE / PFA LINED PIPES AND FITTINGS DIN 2848 CONTENT EXPERTISE p.1 MERSEN ANTICORROSION EQUIPMENT p.2 PTFE / PFA POLYMERS p.3 PTFE / PFA p.4 STEEL PARTS p.7 LINED COMPONENTS p.9 QUALITY CONTROL
More informationMR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
More informationViega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing. Potable Water. Residential Fire Sprinkler.
Viega PureFlow Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow PEX Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other 1 of 18
More informationSubmittal Package PEX Press Fittings with Attached Sleeves For Use with Viega PureFlow Tubing
Submittal Package For Use with Viega PureFlow Tubing Project: Engineer: Contractor: Submitted By: Potable Water Other 1 of 13 Submittal Package For Use with Viega PureFlow Tubing Technical Data Materials:
More informationASTRA EVANGELISTA S.A.
(1) STR EVNGELIST S.. PLNT CNNING COMPRESS Pressure Vessel Design Calculations Vessel No: Customer: FIUB Contract: Designer: HRI/SEG Date: lunes, agosto 09, 2004 1 / 33 Table Of Contents1) Table Of Contents
More informationIBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationCorzan Dimensional Data & Weights
Volume II: 140 PVC & CPVC Dimensional Data & Weights Industrial Technical Manual Series S E C O N D E D I T I O N XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights www.ipexinc.com 140 PVC & CPVC
More informationIBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationViega PEX Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow Tubing. Potable Water. Residential Fire Sprinkler.
Viega PEX Press Zero Lead Fittings with Attached Sleeves For Use with Viega PureFlow Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other 1 of 15 Viega PEX
More informationMineral-insulated thermocouples to DIN and EN
Data Sheet 90.1210 (90.1221) Page 1/7 s to DIN 43 710 and EN 60 584 for temperatures from -200 to +1200 C flexible sheath with shock-proof measuring insert protection tube diameter from 0.5mm fast response
More informationASTM upvc Schedule 80
ASTM upvc PRESSURE PIPING SYSTEM SPECIFICATION Pipes Standards & Quality Sch. 80 pipe is manufactured to comply with NSF Standard 61, CSA B 137.3 and ASTM D1785, consistently meeting the Quality Assurance
More informationARMYLOR PTFE / PFA LINED PIPES AND FITTINGS ANSI B16.5
ARMYLOR PTFE / PFA LINED PIPES AND FITTINGS ANSI B16.5 CONTENT MERSEN ANTICORROSION EQUIPMENT EXPERTISE p.1 MERSEN ANTICORROSION EQUIPMENT p.2 PTFE / PFA POLYMERS p.3 PTFE / PFA p.4 STEEL PARTS p.7 LINED
More informationASME BPVC VIII Example E E PTB
Table of contents Comparison - Form for equations... 2 Example E4.16.1 - Integral Type... 3 E 4.16.1 - Bolted flanges ASME BPVC VIII DIVISION 1 APP. 2, 2017 Edition... 5 Example E4.16.2 - Loose Type...
More informationVisit our website:
Visit our website: www.liansu.com Company Profile IANSU Overview Founded in 19, IANSU is one of the largest manufactures of plastic pipes, plastic fittings, and plastic extrusion machinery in China. Since
More informationARMYLOR PTFE / PFA TECHNICAL GUIDE
ARMYLOR PTFE / PFA lined pipes and fittings DIN 2848 TECHNICAL GUIDE PTFE / PFA lined pipes and fittings are recognized as the ideal solution for conveying or treating highly corrosive fluids using severe
More informationG-FIRE GROOVED FITTINGS
G-FIRE GROOVED FITTINGS 29 Pictorial Table of Contents Figure 510 90 Cast Elbows Page 32 Figures 212 & 312 22 1 2 Elbows Page 35 Figure 501 45 Cast Elbows Page 32 Figures 211 & 311 11 1 4 Elbows Page 36
More informationFor ASME Committee use only.
ð15þ KD-232 PROTECTION AGAINST LOCAL FAILURE In addition to demonstrating protection against plastic collapse as defined in KD-231, the local failure criteria below shall be satisfied. KD-232.1 Elastic
More information45 Flare Fittings. Copper Flare Bonnets and Gaskets. Copper Flare. Copper Flare Gaskets. * C Dimension: Copper Flare Seal Bonnet +/ 1/64
Copper Flare Bonnets and Gaskets Copper Flare Seal Bonnets Part Number Size Flare A (in) B (in) C (in) Box Qty Wt(lb) B1 3 A 04737 3/16 0.31 0.16 0.16 25 0.001 B1 4 A 00414 1/4 0.36 0.22 0.22 100 0.001
More informationWTS Table of contents. Layout
Table of contents Thermal and hydraulic design of shell and tube heat exchangers... 2 Tube sheet data... 4 Properties of Water and Steam... 6 Properties of Water and Steam... 7 Heat transfer in pipe flow...
More informationPiling Products, Inc.
PZ-22 Steel Sheet Piling Specificaiton: ASTM A572 Grade 50 Cross Weight Moment al Pile Wall Modulus of Inertia w h tf Both PZ-22 (mm) (mm) (mm) (cm 2 /m) (kg/m) (kg/m 2 ) (cm 3 /m) (cm 4 /m) (m 2 /m) (m
More informationSeries 7500 Formed Metal Bellows Catalog 974C
Series 00 Formed Metal Bellows Catalog C Innovators of the industry Bellows assemblies for safety valves, control valves, and regulators. When you look for a formed bellows which is reliable, has a long
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More informationDESIGN OF A SHELL AND TUBE HEAT EXCHANGER
DESIGN OF A SHELL AND TUBE HEAT EXCHANGER Swarnotpal Kashyap Department of Chemical Engineering, IIT Guwahati, Assam, India 781039 ABSTRACT Often, in process industries the feed stream has to be preheated
More informationNickel-Plated Brass Push-In Fittings - NPTF/INCH
/INCH Tube Connections: External /8, 5/32, /4, 5/6, 3/8, /2 Thread Connections 0-32 UNF, /8, /4, 3/8, /2 Reusable thread seal, PTFE seal ring (Teflon ) - Pro-Fit Standard - Camozzi s all metal fittings
More informationThree-Way Mixing Valve. with or without presetting, for heating and cooling systems
with or without presetting, for heating and cooling systems escription HEIMEIER three-way, with or without presetting, for mixing volume flows in heating and cooling systems, made of gunmetal, with protection
More informationAppendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus
Appendix A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus r = radius of gyration = I/A J = polar moment of inertia Z p = polar section modulus Circle R D
More informationmy!wind Ltd 5 kw wind turbine Static Stability Specification
my!wind Ltd 5 kw wind turbine Static Stability Specification 1 P a g e 0 3 / 0 4 / 2 0 1 4 Contents Contents... 2 List of Changes... 2 Appendixes... 2 General remarks... 3 1. Introduction... 4 2. Geometry...
More informationMale 5/8 BSP A (mm) Dry Weight (kg) Oil Capacity (Litres) Matrix Face Area (M2) 7 ARO ARO ARO9390
Serck Cooling oil coolers have earned a reputation for being a lightweight highly efficient heat transfer product combined with durability and reliability. Oil coolers are manufactured utilising aluminium
More informationBody (Black) O-ring. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings ubing: etric Size/Connection hread:, Rc, G, NP, NPF Series RoS One-touch fitting with antistatic prevention. One-touch IN/OU connection. Possible to use from vacuum ( 0 kpa.
More information411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.
Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00
More informationSGF. The metric thread forming connection
SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,
More informationCF (Conflat Flange) Fittings - Adapters. (505)
F (onflat ) 1 Fittings - dapters www.idealvac.com (505)72-0037 1 Vacuum Fittings - dapters - olt Kits F - onflat F onflat flanges (F) are used for ultra- Vin elasmer gaskets can be used over and over but
More informationProtective Coatings: Non-lead orange paint RAL red (optional) non-lead paint Hot dipped galvanized conforming to ASTM A-153.
Technical Services: Tel: (66) 500-76 / Fax: (01) 71-7317 www.grinnell.com Grinnell Mechanical Products Grooved Fittings, Ductile Iron & Fabricated Steel General Description Grooved fittings provide an
More informationS E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationASME BPVC VIII Example E E4.3.8 PTB
ASME BPVC VIII-1 217 Example E4.3.7 - E4.3.8 PTB-4-213 Table of contents Comparison - Form for equations... 2 Example E4.3.7- Conical Transitions Without a Knuckle... 3 E4.3.7 Large End - Dished heads
More informationSolenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with
More informationBody (Black) O-ring Stud. Effective when piping in a confined space. The body and the threaded portion can rotate (For positioning to some extent).
Antistatic One-touch Fittings Tubing: Metric Size/Connection Thread: M, Rc, G, NPT, NPTF Series KA RoS One-touch fitting with antistatic prevention. One-touch IN/OUT connection. Possible to use from vacuum
More informationFinite Element Modeling for Transient Thermal- Structural Coupled Field Analysis of a Pipe Joint
International Conference on Challenges and Opportunities in Mechanical Engineering, Industrial Engineering and Management Studies 88 Finite Element Modeling for Transient Thermal- Structural Coupled Field
More informationSTEEL. General Information
General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate
More informationflexible couplings for pipe repair
A R P O L R E P flexible couplings for pipe repair 1 TABLE OF CONTENTS Advantages and Installation Arpol Repair Systems Nominal charts Material specifications Gaps between pipe ends Outside Diameter tolerances
More informationParts list and list of drawings
X-FEL Coupler Doc. Ref. : XFEL/05/01/MEM05/V2 Page : 1/7 Parts list and list of drawings Version n 2 Version n 1 on 30/03/05 on 28/02/05 Writed by : A. Gonnin Checked by : S. Prat On 30/11/04 On 25/03/05
More informationPOE Practice Test - Materials
Class: Date: POE Practice Test - Materials Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A student weighs 150 lbs and is standing on a beam which spans
More informationCork Institute of Technology. Autumn 2007 Mechanics of Materials (Time: 3 Hours)
Cork Institute of Technology Bachelor of Engineering (Honours) in Mechanical Engineering- Stage 2 (NFQ Level 8) Autumn 2007 Mechanics of Materials (Time: 3 Hours) Instructions Answer Five Questions Question
More informationThe use of the Kitemark is authorized in respect of the Product(s) detailed on this Licence provided at or from the above address.
The British Standards Institution hereby grants to: Rapidrop Global Ltd Rutland Business Park Newark Road Peterborough PE1 5WA United Kingdom In respect of: BS 143 & 1256/BS EN 10242 Malleable cast iron
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationNORMAL STRESS. The simplest form of stress is normal stress/direct stress, which is the stress perpendicular to the surface on which it acts.
NORMAL STRESS The simplest form of stress is normal stress/direct stress, which is the stress perpendicular to the surface on which it acts. σ = force/area = P/A where σ = the normal stress P = the centric
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
More informationEX-EMERGENCY LIGHT FITTINGS
EX-EMERGENCY LIGHT FITTINGS nllk 0...N 1-36 W Plastic version for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 N are conform to the requirements of the ATEX-Directive
More informationYour Company Name Here
Your Company Name Here Your Address Here COMPRESS Pressure Vessel Calculations Rev 1 Contact: Engineer's Name Here Item: Example Amine Absorber Drawing No: 12345-1 Rev 3 Customer: Size: 114"ID x 57'-0"
More informationPresented by: Civil Engineering Academy
Presented by: Civil Engineering Academy Structural Design and Material Properties of Steel Presented by: Civil Engineering Academy Advantages 1. High strength per unit length resulting in smaller dead
More informationThermostatic expansion valves TUB/TUBE and TUC/TUCE
MAKING MODERN LIVING POSSIBLE Technical brochure Thermostatic expansion valves B/BE and C/CE www.danfoss.com Thermostatic expansion valve, type B/BE and C/CE Contents Page Introduction........................................................................................
More informationMechanical properties 1 Elastic behaviour of materials
MME131: Lecture 13 Mechanical properties 1 Elastic behaviour of materials A. K. M. B. Rashid Professor, Department of MME BUET, Dhaka Today s Topics Deformation of material under the action of a mechanical
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationI nllk 08018/18 I nllk I nllk 08036/36 I nllk I I nllk 08058/58 I
I nllk / I x W x W x W x W x W Technical data Cooper Crouse-Hinds - all rights reserved nllk / nllk nllk / nllk nllk / Marking to //EC II G Ex na II T / II D td A IP T C EC Conformity Statement PTB ATEX
More informationPVC - WHITE PRESSURE FITTINGS PRODUCTS PRICE LIST INCLUDES: PVC SCHEDULE 40, CLASS 125, POOL/SPA, LASCOTITE, ULTRAFIX REPAIR COUPLINGS PRICE GROUP
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationSanitary Tees H x H x H Test Tees Hx H x H Vents Tees H x H x H Double Sanitary Tee H x H x H x H Long Radius Tee (Combly) H x H x H
ABS DWV Fittings a. Sanitary Tees H x H x H b. Test Tees Hx H x H c. Vents Tees H x H x H d. Double Sanitary Tee H x H x H x H e. Long Radius Tee (Combly) H x H x H f. Fitting Santee - Fitting x H x H
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationMAKING MODERN LIVING POSSIBLE. Thermostatic expansion valve Type TUB/TUBE and TUC/TUCE REFRIGERATION AND AIR CONDITIONING.
MAKING MODERN LIVING POSSIBLE Thermostatic expansion valve Type B/BE and C/CE REFRIGERATION AND AIR CONDITIONING Technical leaflet Thermostatic expansion valve, type B/BE and C/CE Contents Page Introduction........................................................................................
More informationMandatory Appendices
Mandatory Appendices MANDATORY APPENDICES A99 Appendix 1 Supplementary Design Formulas... 315 Appendix 2 Rules for Bolted Flange Connections With Ring Type Gaskets... 331 Appendix 3 Definitions... 351
More informationTorsion Stresses in Tubes and Rods
Torsion Stresses in Tubes and Rods This initial analysis is valid only for a restricted range of problem for which the assumptions are: Rod is initially straight. Rod twists without bending. Material is
More informationPN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
More informationENGINEERING SCIENCE H1 OUTCOME 1 - TUTORIAL 4 COLUMNS EDEXCEL HNC/D ENGINEERING SCIENCE LEVEL 4 H1 FORMERLY UNIT 21718P
ENGINEERING SCIENCE H1 OUTCOME 1 - TUTORIAL COLUMNS EDEXCEL HNC/D ENGINEERING SCIENCE LEVEL H1 FORMERLY UNIT 21718P This material is duplicated in the Mechanical Principles module H2 and those studying
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationInch Size Uni One-touch Fittings. Applicable Tubing. Tubing material. Specifications. Fluid Note 3)
Courtesy of C/Flodyne/ydradyne otion Control ydraulic Pneumatic Electrical echanical (00) 2-50 www.cmafh.com Guide Chuck Suitable for use with nylon and urethane. arge retaining force. The chuck provides
More informationTOP Transfer. Data Sheet. Force transfer standard. Special characteristics. D 20.TOPTRANS.10 en
TOP Transfer Force transfer standard Data Sheet Special characteristics Ultimate precision force transducer for international comparative measurements Tensile/compressive force transducer Nominal forces
More informationThe University of Melbourne Engineering Mechanics
The University of Melbourne 436-291 Engineering Mechanics Tutorial Four Poisson s Ratio and Axial Loading Part A (Introductory) 1. (Problem 9-22 from Hibbeler - Statics and Mechanics of Materials) A short
More informationSubmittal Package. Viega PureFlow Press Polymer Fittings for Use with Viega PureFlow Tubing. Project: Engineer: Contractor: Submitted By:
Viega PureFlow Press Polymer Fittings for Use with Viega PureFlow Tubing Project: Engineer: Contractor: Submitted By: Potable Water Residential Fire Sprinkler Other of 2 Viega PureFlow Press Polymer Fittings
More informationD a t a s h e e t. F o r c e T r a n s d u c e r. S e r i e s K. ( 4 k N k N ) Benefits/Application. Options/Accessories
D a t a s h e e t F o r c e T r a n s d u c e r S e r i e s K ( k N 6 3 0 k N ) Benefits/Application For static and dynamic tensile and compressive forces Hermetically sealed Very small force application
More informationEquivalent T-stubs (Component Method) as per DIN EN
Equivalent T-stubs (Component Method) as per DIN EN 1993-1-8 Nemetschek Frilo GmbH www.frilo.de info@frilo.de As of 23/11/2012 Contents Introduction 3 T-stub model 3 Examples for the T-stub model 9 Introduction
More information8 Deflectionmax. = 5WL 3 384EI
8 max. = 5WL 3 384EI 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz 2 Engineering Data - s and Columns Structural Data 1. Properties properties have been
More informationV-Cone Flowmeter DATASHEET
V-Cone Flowmeter ATASHEET JUNHO 013 IntraCone Cone Flow Meter Type: ICM etail: Cone-Element Technical Information 05/011 FLOW THE SPECIALIST IN LEVEL AN FLOW Cone Flow Meter Technical Information Intra-Automation
More informationPhysics P201 D. Baxter/R. Heinz. EXAM #3 November 21, :00 9:00 PM INSTRUCTIONS
Seat # Your exam is form 1. Physics P201 D. Baxter/R. Heinz EXAM #3 November 21, 2002 7:00 9:00 PM INSTRUTIONS 1. Please indicate which form (1, 2, 3, or 4) exam you have by marking the appropriate bubble
More information2012 MECHANICS OF SOLIDS
R10 SET - 1 II B.Tech II Semester, Regular Examinations, April 2012 MECHANICS OF SOLIDS (Com. to ME, AME, MM) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~
More informationImpact of the forces due to CLIQ discharges on the MQXF Beam Screen. Marco Morrone, Cedric Garion TE-VSC-DLM
Impact of the forces due to CLIQ discharges on the MQXF Beam Screen Marco Morrone, Cedric Garion TE-VSC-DLM The High Luminosity - LHC project HL-LHC Beam screen design - Beam screen dimensions - Conceptual
More information1.1. Operating Parameters:
Propress System Description Propress and Propress XL are safe, reliable, and economical copper pipe installation systems that use modern cold press connection technology for a wide assortment of more than
More informationHARTING D-Sub Selection Guide
HARTING D-Sub Selection Guide People Power Partnership D-Sub Selection Guide D-Sub Device Connectivity HARTING Connectivity & Networks generates solutions throughout the triad of Installation Technology,
More informationRIGID PVC CONDUIT FITTINGS AND ACCESSORIES
AND ACCESSORIES APPLICATIONS Utilities Cable, data and communication lines Institutional, commercial, industrial buildings Residential applications, service entrances Street and highway underground feeds
More informationDIN 2445 Part-2 SEAMLESS STEEL TUBES FOR DYNAMIC LOADS SUPPLEMENT BASIS FOR CALUCULATION OF STRAIGHT TUBES
DIN Part- SEAMLESS STEEL TUBES FOR DYNAMIC LOADS SUPPLEMENT BASIS FOR CALUCULATION OF STRAIGHT TUBES. General information During the operation of hydraulic installations, when the control valve is operated
More informationE 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
More informationAntistatic One-touch Fittings. Packing. Can be used for a wide range of pressures from low vacuum up to a pressure of 1.0MPa.
Antistatic One-touch Fittings Series KA One-touch loading and unloading Possible to use in vacuum (ax. 0kPa) Can be used in copper-free application Flame resistance (UL- standard, V-0) Surface resistance
More informationSwirl Diffuser. Type SDW T 2.2/1/B/1. recommended for room heights from approx m
T 2.2/1/B/1 Swirl Diffuser Type SDW recommended for room heights from approx. 2.60... 4.00 m TROX UK Ltd Caxton Way Thetford Norfolk IP24 3SQ Telephone +44(0) 1842 54545 Telefax +44(0) 1842 63051 e-mail
More information1. ARRANGEMENT. a. Frame A1-P3. L 1 = 20 m H = 5.23 m L 2 = 20 m H 1 = 8.29 m L 3 = 20 m H 2 = 8.29 m H 3 = 8.39 m. b. Frame P3-P6
Page 3 Page 4 Substructure Design. ARRANGEMENT a. Frame A-P3 L = 20 m H = 5.23 m L 2 = 20 m H = 8.29 m L 3 = 20 m H 2 = 8.29 m H 3 = 8.39 m b. Frame P3-P6 L = 25 m H 3 = 8.39 m L 2 = 3 m H 4 = 8.5 m L
More informationDownloaded from Downloaded from / 1
PURWANCHAL UNIVERSITY III SEMESTER FINAL EXAMINATION-2002 LEVEL : B. E. (Civil) SUBJECT: BEG256CI, Strength of Material Full Marks: 80 TIME: 03:00 hrs Pass marks: 32 Candidates are required to give their
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationSNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
More informationSales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - L I G H T F I T T I N G S nllk 0... 1 - W All-plastic design for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 conform to the requirements of the ATEX-Directive
More informationTechnical information CONCRETE / SOLID STONE. Reaction resin mortar, epoxy-acrylate-based with styrene USAGE INSTRUCTIONS
CONCRETE / SOLID STONE USAGE 1. AREAS OF APPLICATION Heavy load-carrying attachments in solid stone, concrete, porous concrete and light concrete Suitable for attachment points close to the edge, since
More informationD e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s
D e s i g n o f R i v e t e d J o i n t s, C o t t e r & K n u c k l e J o i n t s 1. Design of various types of riveted joints under different static loading conditions, eccentrically loaded riveted joints.
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationPERIYAR CENTENARY POLYTECHNIC COLLEGE PERIYAR NAGAR - VALLAM THANJAVUR. DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK
PERIYAR CENTENARY POLYTECHNIC COLLEGE PERIYAR NAGAR - VALLAM - 613 403 - THANJAVUR. DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub : Strength of Materials Year / Sem: II / III Sub Code : MEB 310
More informationEngineering Science OUTCOME 1 - TUTORIAL 4 COLUMNS
Unit 2: Unit code: QCF Level: Credit value: 15 Engineering Science L/601/10 OUTCOME 1 - TUTORIAL COLUMNS 1. Be able to determine the behavioural characteristics of elements of static engineering systems
More informationPVC - WHITE PRESSURE FITTINGS L40P EFFECTIVE OCTOBER 1, 2018 REVISED PRODUCTS PRICE LIST
PRICE GROUP DESCRIPTION 01 SCH 40 PVC through 8 91 SCH 40 PVC 10" AND LARGER 96 CLASS 125 10 & 12 09 POOL AND SPA 14 LASCOTITE 15 ULTRAFIX REPAIR COUPLING DISCOUNT MULTIPLIER PRODUCTS PVC - WHITE PRESSURE
More informationKSV. Slot diffusers. Ordering code. Description. Linear diffusers 1 / 16
Linear diffusers 1 / 1 KSV Slot diffusers Ordering code Number of slots Diffuser Length (mm) KSV - 1... - 19 Description KSV is an air terminal element primarily designated for air supply. It is suitable
More informationSeries 3000 and XE-Series Engineering Data
Series 3000 and XE-Series Engineering Data A C A U S T R A L I A Series 3000 and XE-Series Engineering Data The NEW era of Series 3000 and XE-Series Cooling Towers continue to exceed the industry standard
More information