Series 3000 and XE-Series Engineering Data

Size: px

Start display at page:

Download "Series 3000 and XE-Series Engineering Data"

Della Norman
5 years ago
Views:

1 Series 3000 and XE-Series Engineering Data A C A U S T R A L I A

Series 3000 and XE-Series Engineering Data The NEW era of Series 3000 and XE-Series Cooling Towers continue to exceed the industry standard for factory assembled products.

The NEW Series 3000 Cooling Tower offers up to a 16% capacity increase and the XE-Series Cooling Tower far exceeds the requirements of section J of the uilding Code of Australia T A L E O F C O N T E

2 Series 3000 and XE-Series Engineering Data The NEW era of Series 3000 and XE-Series Cooling Towers continue to exceed the industry standard for factory assembled products. With its low environmental impact design and expanded capacities that range from 751 to 5,944 nominal tons, the NEW Series 3000 is the optimal solution for all your project needs. The NEW Series 3000 Cooling Tower offers up to a 16% capacity increase and the XE-Series Cooling Tower far exceeds the requirements of section J of the uilding Code of Australia T A L E O F C O N T E N T S 2 SERIES 3000 ELEVATION DRAWINGS 3 SERIES 3000 SINGLE CELL DATA 5 XE-SERIES DATA 7 SERIES CELL DATA 9 CONNECTION DATA 11 ASINLESS CONSTRUCTION 13 STRUCTURAL SUPPORT 15 ALTERNATIVE STRUCTURAL SUPPORT AND HEATER KW 1 Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

3 NOTE: Do not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time of purchase. Up-to-date engineering data, free product selection software, and more can be found at Access Door oth Ends H A W End Elevation E 3 L E L E Side Elevation: Single Cell Unit Side Elevation: Double Cell Unit Note: The following units ship in two sections per cell. The top section is the heaviest and tallest. Top section heights are: S3E Model Catalog Upper Section With Installed Fan Guard Height (mm) S3E Model Catalog Upper Section With Installed Fan Guard Height (mm) S3E x 3124 S3E x (L to Q) 3175 S3E x 3124 S3E (R to S) 3327 S3E x 3124 S3E x (T) 3429 S3E x 3531 S3E x (M to Q) 3581 S3E x (L to Q) 3175 S3E x (R to S) 3327 S3E x (R to S) 3327 S3E x (T) 3835 S3E x (T) 3429 M A R

4 Series 3000 Single Cell Data S E R I E S U N I T S Motor kw Fan (m3/s) Operating [2] Weights (kg) Dimensions [3] Shipping Heaviest Section L W H [4] A S3E L S3E M S3E L S3E M S3E N S3E O S3E M S3E N S3E O S3E P S3E M S3E N S3E O S3E M S3E N S3E O S3E P S3E M S3E N S3E O S3E N S3E O S3E P S3E Q S3E R S3E P S3E Q S3E R S3E S S3E P S3E Q S3E R S3E S S3E P S3E Q S3E R S3E S Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

5 NOTE: Do not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time of purchase. Up-to-date engineering data, free product selection software, and more can be found at S E R I E S U N I T S Motor HP Fan (m3/s) Operating [2] Weights (kg) Dimensions [4] Shipping Heaviest Section L W H [3] A S3E P S3E Q S3E R S3E S S3E T S3E O S3E P S3E Q S3E R S3E Q S3E R S3E S S3E T S3E Q S3E R S3E S S3E T S3E Q S3E R S3E S S3E T NOTES FOR SINGLE CELL UNITS: 1. S3E T, S3E T, S3E T and S3E T are supplied with a gear drive system as standard. 2. Operating weight is based on the water level in the cold water basin at overflow height. If a lower operating weight is needed to meet design requirements, your local AC Representative can provide additional assistance. 3. Refer to page 2 for dimensional reference drawings. 4. Models shipped with an optional gear drive or Low Sound Fan may have heights up to 270mm greater than shown. For units with Whisper Quiet Fans please contact your local AC Representative for height dimensions. M A R

6 -Series Data X E - S E R I E S U N I T S Motor HP Fan (m3/s) Operating [3] Weights (kg) Dimensions [4] Shipping Heaviest Section L W H [5] A XES3E G XES3E H XES3E J XES3E K XES3E G XES3E H XES3E J XES3E K XES3E G XES3E H XES3E J XES3E K XES3E L XES3E G XES3E H XES3E J XES3E K XES3E L XES3E G XES3E H XES3E J XES3E K XES3E L XES3E H XES3E J XES3E K XES3E L XES3E J XES3E K XES3E L XES3E M XES3E K XES3E L XES3E M XES3E N XES3E O XES3E K XES3E L XES3E M XES3E N XES3E O Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

7 NOTE: Do not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time of purchase. Up-to-date engineering data, free product selection software, and more can be found at X E - S E R I E S U N I T S Motor HP Fan (m3/s) Operating [2] Weights (kg) Dimensions [3] Shipping Heaviest Section L W H [4] A XES3E K XES3E L XES3E M XES3E N XES3E O XES3E L XES3E M XES3E N XES3E O XES3E J XES3E K " XES3E L XES3E M XES3E N XES3E L XES3E M XES3E N XES3E O XES3E P " XES3E L XES3E M XES3E N XES3E O XES3E P XES3E M XES3E N XES3E O XES3E P NOTES FOR XE-SERIES UNITS: 1. Operating weight is based on the water level in the cold water basin at overflow height. If a lower operating weight is needed to meet design requirements, your local AC Representative can provide additional assistance. 2. Refer to page 2 for dimensional reference drawings. 3. Models shipped with an optional gear drive or Low Sound Fan may have heights up to 270mm greater than shown. For units with Whisper Quiet Fans please contact your local AC Representative for height dimensions. M A R

8 Series 3000 Double Cell Units D O U L E C E L L S E R I E S U N I T S Motor kw Fan (m3/s) Operating [2] Weights (kg) Dimensions [3] Shipping Heaviest Section L W H [4] A S3E L S3E M S3E L S3E M S3E N S3E O S3E M S3E N S3E O S3E P S3E M S3E N S3E O S3E M S3E N S3E O S3E P S3E M S3E N S3E O S3E N S3E O S3E P S3E Q S3E R S3E P S3E Q S3E R S3E S S3E P S3E Q S3E R S3E S S3E P S3E Q S3E R S3E S Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

9 NOTE: Do not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time of purchase. Up-to-date engineering data, free product selection software, and more can be found at D O U L E C E L L S E R I E S U N I T S Motor HP Fan (m3/s) Operating [2] Weights (kg) Dimensions [4] Shipping Heaviest Section L W H [3] A S3E P S3E Q S3E R S3E S S3E T S3E O S3E P S3E Q S3E R S3E Q S3E R S3E S S3E T S3E Q S3E R S3E S S3E T S3E Q S3E R S3E S S3E T NOTES FOR DOULE CELL UNITS: 1. S3E T, S3E T, S3E T and S3E T are supplied with a gear drive system as standard. 2. Operating weight is based on the water level in the cold water basin at overflow height. If a lower operating weight is needed to meet design requirements, your local AC Representative can provide additional assistance. 3. Refer to page 2 for dimensional reference drawings. 4. Models shipped with an optional gear drive or Low Sound Fan may have heights up to 270mm greater than shown. For units with Whisper Quiet Fans please contact your local AC Representative for height dimensions. M A R

10 Series 3000 Connection Data C O N N E C T I O N D I M E N S I O N S Dimensions [1] Inlet Connection Sizes [2,4] Outlet Connection Sizes [3,4] C D F Easy Connect Top Inlet Outlet S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x Remote Sump NOTES FOR CONNECTION DIMENSIONS: 1. For dimension locations, see page The specific size of the inlet and outlet connection may vary with the design cooling water flow rate. 3. Unless otherwise indicated, all connections 80Nand smaller are male pipe thread, and connections 100N and larger are beveled for welding and grooved to suit a mechanical coupling. 4. On double cell units, connections are the same size but are located on both ends of the unit. Refer to page 2 for side elevation view. 9 Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

11 NOTE: Do not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time of purchase. Up-to-date engineering data, free product selection software, and more can be found at Access Door oth Ends Optional End Inlet EASY CONNECT H A D Standard Side Outlet 12mm W W End Elevation: Face A Standard Top Inlet Face A Optional ottom Inlet EASY CONNECT Optional ottom Outlet/ Remote Sump C UNIT L C UNIT L 12mm L 12mm W C Face Plan View: Top 1140mm F Face A Face Plan View: asin M A R

12 Series 3000 asinless Data C O N C R E T E A S I N E N G I N E E R I N G D A T A F O R O P T I O N A L A S I N L E S S U N I T S Model Number Operating Load Vertical (kg) Maximum Operating Weight (kg) A C D S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x NOTES FOR ASINLESS DATA: 1. Purchaser to design, construct, and furnish basin (including anchor bolts) in accordance with requirements given. Purchaser must also supply sump, overflow, drain, cleanout, and water make-up to suit requirements. 2. All anchor bolts shall be 19mm diameter, 38mm projection (±1/4 ), fully threaded. olt to have one nut and washer. Anchor bolt and column bearing point locations and elevations must be maintained ±3mm. 3. Pier dimensions shown are minimum bearing surfaces required for the tower structure and do not include corner chamfers on the concrete piers. 4. Fill to be located below the operating water level (see Side View of Concrete asin for All Models on page 12). 5. Maximum operating weight does not include concrete basin or water retained in the basin. 11 Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

13 NOTE: Do not use for construction. Refer to factory certified dimensions. This catalog includes data current at the time of publication, which should be reconfirmed at the time of purchase. Up-to-date engineering data, free product selection software, and more can be found at 76mm Min. (Typ) 76mm Min. (Typ) 270mm Min. 194mm 76mm Min. (Typ) 76mm Min. (Typ) 286mm Min. 209mm Air In (6) 19mm Dia. Anchor olts mm mm Min. 152mm Min. C 270mm Min. 194mm Air In A mm mm Min. Air In (8) 19mm Dia. Anchor olts mm mm Min. 152mm Min. C 152mm Min. D 286mm Min. 209mm C Air In mm mm Min. Plan View of Concrete asin: Models S3E/XES3E-8518-X, S3E/XES3E-1020-X, and S3E/XES3E-1222-X Plan View of Concrete asin: Model S3E/XES3E-1424-X 25mm See Detail A Operating Water Level mm mm Detail A Concrete asin Wall Slope asin Depth Top of Piers And ase of Cooling Tower Side View of Concrete asin: All Models M A R

14 Series 3000 Structural Support The recommended support arrangement for the Series 3000 Cooling Tower consists of parallel I-beams positioned as shown in the drawings on page 14. esides providing adequate support, the steel also serves to raise the unit above any solid foundation to assure access to the bottom of the tower. The Series 3000 Cooling Tower may also be supported on columns at the anchor bolt locations shown in Plan A (single cell) or Plan C (double cell). A minimum bearing surface of 305mm x 305mm must be provided under each of the concentrated load points. Alternate steel support arrangements can be found on page 15. To support a Series 3000 Cooling Tower on columns with an alternate steel support arrangement or the optional upgraded seismic and wind rated unit, consult your local AC Representative. S T R U C T U R A L S U P P O R T Model Number Weights (kgs) Operating [1] Shipping [2] Dimensions (mm) WT. at olt Hole Locations L1 L2 W A C D E S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x S3E/XES3E x NOTES: 1. Operating weight is based on the water level in cold water basin at overflow height. 2. Unit support beams and anchor bolts to be designed and furnished by others. 3. Support beams must be flush and level at top. 4. Steel frame members perpendicular to the support beams and under the air intake edges of unit must be at least 50mm below the top of the support beams. 5. For support beam spacing other than shown, mounting holes in the unit are to be drilled by others. 13 Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

15 3/4 Dia. Mounting Holes (8 Required Models S3E-8518-XXX Thru S3E X) (16 Required Models S3E X Thru S3E X) Unit Outline Air Intake C L C olts L1 Air Intake C L olts A Unit Overall W 4 1/2 Additional Anchor olts Models 3/4 Dia. Mounting Holes (8 Required Models S3E-8518-XXX Thru S3E X) (16 Required Models S3E X Thru S3E X) Plan A: Single Cell Unit Air Intake Unit Outline C olts C L L1 Air Intake C L olts A Unit Overall W 4 1/2 3/4 Dia. Mounting Holes (8 Required Models S3E-8518-XXX Thru S3E X) (16 Required Models S3E X Thru S3E X) Unit Outline Plan : Single Cell Unit Additional Anchor olts Models S3E X Thru S3E X C C L olts Air Intake D Air Intake L2 Air Intake C olts C L Air Intake C L olts A Unit Overall W 4 1/2 Plan C: Double Cell Unit Additional Anchor olts Models S3E X Thru S3E X M A R

16 Series 3000 Alternative Structural Support The Series 3000 Cooling Towers (excluding basinless option) can accommodate Plan A (single cell) and Plan C (double cell) support with alternative spacing of anchor bolt hole center lines as listed in the table below. AC provides specific anchorage drawings in the job file that reflect the revised anchor bolt hole center line dimension only. IC wind and seismic load ratings are not available on alternate steel support arrrangements. The unit will have pre-punched anchor bolt holes in the standard and minimum hole spacing locations only. All other alternative anchor bolt holes are located and drilled by others. A LT E R N A T I V E S T R U C T U R A L S U P P O R T Standard Spacing A Dimension Alternate Spacing A Dimension S3E/XES3E-8518-X 2842mm 2257mm S3E/XES3E-1020-X 3452mm 2440mm S3E/XES3E-1222-X 3914mm 2892mm S3E/XES3E-1424-X 4672mm 3660mm NOTE: The standard structural support figures on page 14 apply to alternative structural support as well. A S I N H E A T E R S Evaporative cooling equipment exposed to below freezing ambient temperatures require protection to prevent freezing of the water in the cold water basin when the unit is idle. Factory-installed electric immersion heaters, which maintain 4.4 C water temperature, are a simple and inexpensive way of providing such protection. H E A T E R k W D A T A C Ambient Heaters C Ambient Heaters Number of Heaters kw per Heater Number of Heaters kw per Heater S3E/XES3E S3E/XES3E S3E/XES3E x, -07x S3E/XES3E x, -12x, -13x, -14x S3E/XES3E S3E/XES3E x, -13x, -14x NOTE: This table is based on 460V/3 phase/60 Hz power. 15 Q U E S T I O N S? C A L L O R V I S I T W W W. A L T I M O R E A I R C O I L. C O M. A U. A U

17 COOLING TOWERS CLOSED CIRCUIT COOLING TOWERS ICE THERMAL STORAGE EVAPORATIVE CONDENSERS HYRID PRODUCTS PARTS & SERVICES w w w. a l t i m o r e A i r c o i l. c o m. a u 120 Wisemans Ferry Road, Somersby NSW 2250 Telephone (Australia): Telephone (New Zealand):

PFI Closed circuit cooling towers

PFI Closed circuit cooling towers Key benefits Lowest energy consumption and total cost of ownership Year round reliable operation Ideal replacement unit with certified thermal performance PFI characteristics