IVR2-SPI 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply

Size: px

Start display at page:

Download "IVR2-SPI 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply"

Joan O’Neal’
6 years ago
Views:

1 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply.83 (7/8 ) 160 OPENING 1.90 (1 7/8 ) E xac t decimal and common fr ac tion is sho w n Ends o f Il l umina t e d r ail f iel d cu t t abl e t o a minimum o f 2 1/ 8 in l eng t h. Illuminated rail is available with a minimum length of and maximum length of 1.75 U.S. Patent # D615,217S issued Other patents pending Post spacing on center is a maximum of 60 and a minimum of 2 PHOTOMETRIC DATA L ED:.6W High Ou tpu t CCT: 000K Illuminated Rail L eng th: 1 Rail Height: Post Spacing: 8 60 Flood 20 Narrow 30 Asymmetrical Internal Rail Construction: He a v y du t y ex tr uded T6 A l um in um A l l o y. External Rail Jacket: Av ail abl e in 30 or 316 s t ainl e s s s teel. S t andar d aluminum f inishe s include silv er, w hi te, bl ack, or bron ze po w der-coat. C onsult f ac tor y for cus tom po w der coat f inishe s (A AMA 260). LED LIGHT SOURCE Cl o s ely packed ar r a y o f small L ED s all o w for smoo th s e aml e s s illumination w i th immediate o v er l ap to a v oid pixil ation and pro v ide a continuous f l o w o f l ight. C ol or temper ature s op tions include 2700K, 3000K, 3500K or 000K. 85 CRI 50,0 0 0 hour s o f a v er age r ated l i fe at 70% ou tpu t L ED component s are e asily acce s sibl e to all o w for e as y maintenance Ma x imum r un l eng th per dr i v er: 8 (HO) Ma x imum r un l eng th per dr i v er: (SHO) LED LIGHT ENGINE (PER FOOT): High Output System Power Consumption:.6W C ool W hi te 0 0 0K : 21 l m Neu tr al W hi te 350 0K : 207 l m W ar m W hi te K : 202 l m W ar m W hi te K : 19 7 l m Super High Output (Integral driver required on each post) System Power Consumption: 9.2 W C ool W hi te 0 0 0K : 8 3 l m Neu tr al W hi te 350 0K : 15 l m W ar m W hi te K : 0 l m W ar m W hi te K : 395 l m LIGHT DISTRIBUTION & OUTPUT T he V-Rail op tic al s y s tem include s a unique re f l ec tor that all o w s y ou to pu t the l ight w here i t is needed. Fac tor y pre s e t dis tribu tions include 60 s y mme tric, 20 s y mme tric and 30 as y mme tric. OPTICAL LENS SYSTEM High-impac t acr y l ic l ens is s e al ed w i th sil icon. L ens is s ecured w i th (2) counter sunk f lush s cre w s, (1) at e ach end. Vandal re sis t ant TOR X is al s o avail able. Consult fac tor y. REFLECTOR SYSTEM Inter nal re f l ec tor s y s tem is cons tr uc ted o f an inno v ati v e mater ial that has 9 9% re f l ec t ance proper tie s. Re f l ec tor all o w s up to 1 0 tot al adjus tment. Right to l e f t side re f l ec tor panel s are independently adjus t abl e f rom -30 to 70. W hen the ou ter re f l ec tor panel is adjus ted to w ar d a s t air w a y, r amp or w al k w a y, the re f l ec tor panel w ill ac t as a gl are shiel d f rom dis t ant v ie w ing angl e s below an elevated plat form. Each r ail suppor t is s ecured to the s w i v el mount on speci f ied mounting s y s tem. Po s t or embedded mount is a v ail abl e. S ee mounting submi t t al shee t s for detailed information. SURFACE SIMULATED NATURAL FINISHES Avail abl e in 8 s t andar d w ood gr ain po w der coated finishes S tr aight r uns only, consult f ac tor y EMERGENCY Remo te emer genc y in v er ter a v ail abl e. C an be remo te up to 0 0 f t. S ee IB-IIS speci f ic ation sheet. LISTINGS 5-Year Intense LED Limited Warrant y (L ED & Po w er Supply Only) UL We t L oc ation L is ted. Fil e #E IDA approved A D A compl iant V-RAIL L /M P-1

2 2 Slim Post Mount Assembly 1/ 2 A 35 (Max angle) 2 OD 1.8 ID B DIMENSIONS Guardrail Handrail A 17 1 B BASE SPECIFICATION 3x Ø0.3 Ø3.55 Ø.5 Pos t mount as sembly is av ail able in heav y dut y s teel alloy or No. polished 30 s t ainle s s s teel. S t andard aluminum f inishe s include silver, w hite, bl ack, or bronze powder-coat. Consult factor y for cus tom po w der coat f inishe s ( A A M A 260 ). MAINTENANCE Pos t s include a dri ver acce s s door w here po w er supply component s are easily acce s sible. Tamper proof hard w are and special tool s are s t andard and included. POWER SUPPLY Lutron Hi-Lume A-Serie s Dri ver is a high-per formance L ED dri ver that pro v ide s smooth, continuous 1% dimming. See driver specifications. Dimming Range: 0% to 1% Oper ating Volt age: /60Hz Rated lifetime of 50,000 hr t c = 65 C Po w er Fac tor: > 0.9 at 0 W S t andb y Po w er Consumption: < 1.0 W Tot al Harmonic Dis tor tion: < 20% at 0W Inr ush Current: < 2 A Pos t are to be spaced at a ma ximum of 60 and minimum of 2 on center s. Pos t mount is to be sur f ace mounted to concrete utilizing 3 / 8 anchor bolt s (supplied b y other s). A nchoring means mus t be determined b y loc al code s. Not to be supplied or engineered b y Intense L ighting. See pos t mount ins t all ation char t for more information. A nchorage template available by request. OPERATION Pos t w ith integr al po w er supply w ill po w er up-to 83 1/ 2 of illuminated r ail. High output L ED only. Super high output not available. FITTINGS Consult f ac tor y for s t andard f it tings and epox y weld adhesive specification. Post Specification Post Mount Installation Detail Level Post Output (2V DC) Ser vice Bay Opening IMPORTANT: Seal end of conduit with good grade RT V to prevent moisture entering compartment LED Power Supply Grout as required to level posts for uneven or grades not level Electrical 1/2 conduit (max) Stub-up, In and out access (by others) 6 above grade. Input (120 / 277V) Anchors supplied and approved by others. Note: Conduit feed only required when installing post with integral power supply. Typically every other post will require conduit feed. V-RAIL L /M P -2

3 2 Slim Post Embedded Assembly (Max angle) A 35 B DIMENSIONS Guardrail Handrail A 17 1 B Grade Level Embedded mount as sembly is av ail able in heav y dut y s teel alloy or No. polished 30 s t ainle s s s teel. S t andard aluminum f inishe s include silver, w hite, bl ack, or bronze powder-coat. Consult factor y for custom powdercoat finishes(a A M A 260). MAINTENANCE Pos t s include a dri ver acce s s door w here po w er supply component s are easily acce s sible. Tamper proof hard w are and special tool s are s t andard and included. POWER SUPPLY Lutron Hi-Lume A-Serie s Dri ver is a high-per formance L ED dri ver that pro v ide s smooth, continuous 1% dimming. See driver specifications. Dimming Range: 0% to 1% Oper ating Volt age: /60Hz Rated lifetime of 50,000 hr t c Po w er Fac tor: > 0.9 at 0 W S t andb y Po w er Consumption: < 1.0 W Tot al Harmonic Dis tor tion: < 20% at 0 W Inr ush Current: < 2 A Pos t are to be spaced at a ma ximum of 60 and minimum of 2 on center s. Embedded mount pos t are set into pl ace using Rockite or Kw ixset anchor cement. A minimum of 6 pos t mus t be embedded into concrete to structurally secure pos t. A nchoring means mus t be determined b y loc al code s. Not to be supplied or engineered b y Intense L ighting. See Embedded Mount Ins t all ation char t for more information. OPERATION Pos t w ith integr al po w er supply w ill po w er up-to 83 1/ 2 of illuminated r ail. High output L ED only. Super high output not av ail able. FITTINGS Consult f ac tor y for s t andard f it tings and epox y weld adhesive specification. 6 ( T V P) 2 OD 1.8 ID *Notif y if other embedment dimension required. Post Specification Level Post Embedded Installation Detail Output (2V DC) Ser vice Bay Opening LED Power Supply Input (120 / 277V) IMPORTANT: Seal end of conduit with good grade RT V to prevent moisture entering compartment Concrete (by others) Note: Conduit feed only required when installing post with integral power supply. Typically every other post will require conduit feed. Rockite Anchor Cement (or equal) 6 Burial Depth* Field wiring connects to internal terminal block. Electrical 1/2 conduit (max) Stub-up, In and out access (by others) 6 above grade. *Cored hole dimensions to be determined by others per local codes. V-RAIL L /M P-3

Lutron Hi-lume A-Series Driver Maximum Driver-to-LED Light Engine Wire Length Wire Gauge Maximum Lead Length 15 f t (.5 m) 16 25 f t (7.5 m) 1 0 f t (12 m) 12 60 f t ( m) Width: 1. Height: 1.

4 Lutron Hi-lume A-Series Driver Maximum Driver-to-LED Light Engine Wire Length Wire Gauge Maximum Lead Length 15 f t (.5 m) f t (7.5 m) 1 0 f t (12 m) f t ( m) Width: 1. Height: Length: DESCRIPTION Hi-lume A-Series Driver is a high-per formance LED driver that prov ides smooth, continuos 1% dimming. FEATURES Continuous, flicker free dimming from 0% to 1% Compac tible w ith Energi Sav r Node w ith EcoSystem unit, QS control unit, Pow Pak dimming allow ing for integration into a pl anned or existing EcoSystem lighting control solution. Standard 3-w ire line-volt age phase-control technolog y for consistent dimming per formance and compatibilit y with all Lutron 3-wire fluorescent controls. Rated lifetime of 50,000 t c UL recognized for United St ates and Canada RoHS Constant Volt age Driver w ith Pul se W idth Modul ation (P W M) dimming PERFORMANCE Dimming Range: 0% to 1% Operating Volt age: V ~ at 50/60Hz Rated lifetime of 50,000 t c Patented thermal foldback protection LEDs turn on to any dimmed level w ithout going to full brightness Nonvol atile memor y restores all driver set tings af ter power failure Power Fac tor: > 0.9 at 0 W Standby Power Consumption: < 1.0 W Tot al Harmonic Distor tion (THD): < 20% at 0 W Inrush Current: < 2 A Inrush Current Limiting Circuitr y: eliminates circuit breaker tripping, s w itch arcing and rel ay failure Open circuit protected Shor t circuit protected Turn-on time: 1 second P W M Dimming Frequenc y: 550Hz ENVIRONMENTAL Sound Rating: Cl as s A Rel ative Humidit y: Maximum 90% non-condensing Minimum operating ambient temperature t a = 32 F (0 C) STANDARDS Meet s A NSI C62.1 categor y A surge protec tion standards up to and including k V FCC Par t 15 compliant for commercial applications at 120 V ~ or 277 V ~ UL 8750 recognized DRIVER WIRING AND MOUNTING Terminal blocks on the driver accept one solid w ire per terminal from to 16 AW G (0.75 to 1.5 mm 2 ) Fix ture must be grounded in accordance w ith local and national elec trical codes LISTINGS UL Recognized for United St ates and Canada RoHS FCC V-RAIL L /M P-

1.9 Solid State Illuminated Rail Specification Guide V-Rail Part Number (Example: I V R2-SPI-ST-P36-HO27-60S-EM) (Spe ci f y Quan t i t y B y Foo t) A: Family B: Finish C: Mounting /Height D: LED

5 1.9 Solid State Illuminated Rail Specification Guide V-Rail Part Number (Example: I V R2-SPI-ST-P36-HO27-60S-EM) (Spe ci f y Quan t i t y B y Foo t) A: Family B: Finish C: Mounting /Height D: LED Output E: CCT F: Light Distribution G: Electrical H: Options IVR2-SPI -ST (30 Stainless Steel) 1 -P36 (3 6 Po s t Moun t) -HO (High Output) 27 (2700K) -60S (60 Symmetric) bl ank Lutron Hi-Lume -I (Infill) 3 -W (W hite Aluminum) -P2 (2 Po s t Moun t) -SHO (Super High Output) 30 (3000K) -20S (20 Symmetric) A-S er ie s 12 0 / V -B (Bl ack Aluminum) -E36 (36 Embedded Mount) 35 ( K ) -30AS (30 A s ymmetric) Driver -BR (Bronze Aluminum) -E2 (2 Embedded Mount) 0 (000K) -SV (Silver Aluminum) -SU (Sur f ac e ) 2 -C (C us t om) 3 Notes: S t ainl e s s s t e el a v ail abl e b y spe cial or der 2. S e e Sur f ac e simul a t e d na t ur al f inishe s submi t t al she e t f or spe ci f ic a t ion. S t r aigh t r uns only. 3. Special order, consult factor y. In t e gr al dr i v er r e quir e d on e ach po s t Specification and Delivery Process A rchitec tur al dr aw ings or det ailed ele v ation dr aw ings are required for a V-Rail quot ation. A photometric l ayout w ill be pro v ided if reque s ted. Once an order is pl aced, Intense L ighting will provide detailed shop drawings for approval V-Rail w ill be deli vered to the job site read y for ins t all ation. A det ailed as sembly dr aw ing w ill be pro v ided along w ith dimensions and loc ations for remote po w er supplie s. A ll produc t s included w ill be l abeled clear ly to match the as sembly dr aw ing. Cer t ain tool s and equipment w ill be required for the as sembly of V-Rail. A det ailed lis t of tool s c an be found in the V-Rail Ins t all ation Guide. Ins t all ation guide av ail able upon reque s t, consult f ac tor y Photometric Layout Shop Drawing / Assembly Guide Notes: Completed Project V-RAIL L /M P- 5

IVR2-SPI Solid State Illuminated Rail 2 Slim Post Integral Power Supply

IVR2-SPI Solid State Illuminated Rail 2 Slim Post Integral Power Supply IVR2-SPI - 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply.83 (7/8 ) 160 OPENING 1.90 (1 7/8 ) E xac t decimal and common fr ac tion is sho w n Ends o f Ill uminated r ail f iel d cu