EZ-LIGHT Touch Gen 2 K50 FDA-Grade Illuminated Multipurpose Buttons

Transcription

1 EZ-LIGHT Touch Gen K0 FD-Grade Illuminated Multipurpose uttons Datasheet General Purpose Multicolor Indicator with Independent Momentary Touch utton Output FD-grade materials; rated to IE IP, IP, and IP9K Laser marked information withstands aggressive cleaning procedures Excellent immunity to false triggering by water spray, detergents, oils, and other foreign materials Rugged, cost-effective, and easy-to-install multicolor indicator with touch button Three independent colors in one unit olor overrides olors and, olor overrides olor vailable with PNP and NPN inputs/outputs, depending on model Ergonomically designed to eliminate hand, wrist, and arm stresses associated with repeated switch operation; require no physical force to operate an be actuated with bare hands or in gloves V to 0 V dc operation WRNING: Not To e Used for Personnel Protection Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. failure or malfunction can cause either an energized or de-energized output condition. Models Model I/O Type Output State olor olor olor onnection K0PTFGRYFQP K0RPTFGRYFQP K0NTFGRYFQP K0RNTFGRYFQP PNP NPN N.O. N.. N.O. N.. Green Red Yellow 0 mm ( in) PV cable with a -pin M/Eurostyle male, stainless steel, quick disconnect (QD) Indicator and Output ehavior Table : PNP Models Input ctions Touch utton ctions Input #: Pin Green Wire Input #: Pin Red Wire Input #: Pin Yellow Wire LED olor Output Type Touch Output: Pin White Wire Open or -Vdc Open or -Vdc Open or -Vdc Light Off N.O. Not touched PNP Output Off +V dc Open or -Vdc Open or -Vdc olor # On Touched PNP Output On +V dc +V dc Open or -Vdc olor # On N.. Not touched PNP Output On +V dc +V dc +V dc olor # On Touched PNP Output Off Open or -Vdc +V dc Open or -Vdc olor # On Open or -Vdc +V dc +V dc olor # On Open or -Vdc Open or -Vdc +V dc olor # On +V dc Open or -Vdc +V dc olor # On To order the m (. ft) PV cable model, omit the suffix "QP" in the model number. For example, K0PTFGRYF. Original Document 9 Rev. D July 0 9

2 EZ-LIGHT Touch Gen K0 FD-Grade Illuminated Multipurpose uttons Table : NPN Models Input ctions Touch utton ctions Input #: Pin Green Wire Input #: Pin Red Wire Input #: Pin Yellow Wire LED olor Output Type Touch Output: Pin White Wire Open or +V dc Open or +V dc Open or +V dc Light Off N.O. Not touched NPN Output Off -Vdc Open or +V dc Open or +V dc olor # On Touched NPN Output On -Vdc -Vdc Open or +V dc olor # On N.. Not touched NPN Output On -Vdc -Vdc -Vdc olor # On Touched NPN Output Off Open or +V dc -Vdc Open or +V dc olor # On Open or +V dc -Vdc -Vdc olor # On Open or +V dc Open or +V dc -Vdc olor # On -Vdc Open or +V dc -Vdc olor # On Specifications Supply Voltage V to 0 V dc Supply urrent < m max current at V dc (exclusive of load) < 0 m max current at 0 V dc (exclusive of load) Supply Protection ircuitry Protected against reverse polarity and transient voltages Output Rating Maximum load: 0 m ON-state saturation voltage: < V at 0 m dc; <. V at 0 m dc OFF-state leakage current: <0 µ at 0 V dc Output Response Time 0 milliseconds On and Off Power-Up Delay 00 milliseconds Indicators olor : Green olor : Red olor : Yellow Indicator Lumens olor Typical Wavelength Typical Intensity (lm) Green nm 9 Red nm Yellow 9 nm Environmental Rating IE IP, IP9K per DIN Operating onditions 0 to +0 ( 0 F to + F) 90% at 0 maximum relative humidity (non-condensing) Storage 0 to +0 ( 0 F to + F) Vibration and Mechanical Shock Vibration 0 Hz to Hz.0 mm p-p amplitude per IE 00-- Shock 0G ms duration, half sine wave per IE 00-- onnections 0 mm ( in) PV cable with a -pin M/Euro-style male, stainless steel, quick disconnect (QD), or m (. ft) PV integral cable onstruction ase, dome, and nut: FD-grade polycarbonate Mounting M0. Threaded base Max torque. N m (0 in lbf) ertifications Required Overcurrent Protection WRNING: Electrical connections must be made by qualified personnel in accordance with local and national electrical codes and regulations. Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via urrent Limiting, lass Power Supply. Supply wiring leads < WG shall not be spliced. For additional product support, go to Supply Wiring (WG) Required Overcurrent Protection (mps) Tel: +--- P/N 9 Rev. D

3 EZ-LIGHT Touch Gen K0 FD-Grade Illuminated Multipurpose uttons Dimensions ll measurements are listed in millimeters [inches], unless noted otherwise. Wiring Diagram NPN (Sinking) Output Models PNP (Sourcing) Output Models Wiring Key Pinout Load N/ N/ + -0V dc Load N/ N/ + -0V dc = White = rown = Green = Yellow = Gray = Pink = lue = Red ccessories ordsets -Pin Threaded M/Euro-Style ordsets with Open-Shield MQDS-0. m ( ft) MQDS- MQDS-0. m ( ft) 9. m (0 ft) Typ. Straight MQDS-0. m (0 ft) M x ø. = White = rown = Green = Yellow = Gray = Pink = lue = Red P/N 9 Rev. D - Tel: +---

4 EZ-LIGHT Touch Gen K0 FD-Grade Illuminated Multipurpose uttons -Pin Threaded M/Euro-Style ordsets with Open-Shield MQDS-0R MQDS-R MQDS-0R. m ( ft). m ( ft) 9. m (0 ft) Typ. [."] Right-ngle 0 Typ. [."] MQDS-0R. m (0 ft) M x ø. [0."] -Pin Threaded M/Euro-Style ordsets with Open-Shield Washdown, Stainless Steel MQD-WDSS-00 MQD-WDSS-0. m ( ft). m ( ft) Straight Typ. MQD-WDSS m (0 ft) M x ø. = White = rown = Green = Yellow = Gray = Pink = lue = Red rackets SM0 Right-angle bracket with curved slot for versatile orientation learance for M (¼ in) hardware Mounting hole for 0 mm -ga. stainless steel Hole center spacing: to =0 Hole size: =ø., =. x., =ø 0. 9 SM0F Swivel bracket with tilt and pan movement for precise adjustment Mounting hole for 0 mm -ga. 0 stainless steel Easy mounting to extrude rail T-slot Metric and inch size bolt available...9 olt thread: SM0F, = / - x in; SM0FM0, = M0 -. x 0 Hole size: = ø 0. SM0FVK V-clamp, flat bracket and fasteners for mounting to pipe or extensions lamp accommodates mm dia. tubing or in. square extrusions 0 mm hole for mounting SM0MM -ga. stainless steel bracket with curved mounting slots for versatile orientation learance for M (¼ in) hardware Mounting hole for 0 mm 0 Hole size: = ø Hole center spacing: =, to =. Hole size: =. x, = ø., = ø Tel: +--- P/N 9 Rev. D

5 EZ-LIGHT Touch Gen K0 FD-Grade Illuminated Multipurpose uttons SM0RVK V-clamp, right-angle bracket and fasteners for mounting to pipe or extrusion lamp accommodates mm dia. tubing or in. square extrusions 0 mm hole for mounting 90 SM0S Swivel bracket with 0 mm mounting hole for lack reinforced thermoplastic polyester Stainless steel mounting and swivel locking hardware included 9 Hole size: = ø 0. Hole center spacing: =ø 0. Hole size: =ø.0, =ø 0.0 SMMS0P Flat SMMS series bracket 0 mm hole for mounting rticulation slots for 90 + rotation -ga. 00 series stainless steel Hole center spacing: =.0, to =.0 Hole size: =. x.0, =ø., =ø.0 9 SMMS0R Right-angle SMMS series bracket 0 mm hole for mounting rticulation slots for 90 + rotation -ga. (. mm) cold-rolled steel Hole center spacing: =.0, to =.0 Hole size: =. x.0, =ø., =ø.0 T-K0-L Touch cover Ø Diameter: = mm Height: =. mm anner Engineering orp. Limited Warranty anner Engineering orp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. anner Engineering orp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the anner product. THIS LIMITED WRRNTY IS EXLUSIVE ND IN LIEU OF LL OTHER WRRNTIES WHETHER EXPRESS OR IMPLIED (INLUDING, WITHOUT LIMITTION, NY WRRNTY OF MERHNTILITY OR FITNESS FOR PRTIULR PURPOSE), ND WHETHER RISING UNDER OURSE OF PERFORMNE, OURSE OF DELING OR TRDE USGE. This Warranty is exclusive and limited to repair or, at the discretion of anner Engineering orp., replacement. IN NO EVENT SHLL NNER ENGINEERING ORP. E LILE TO UYER OR NY OTHER PERSON OR ENTITY FOR NY EXTR OSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR NY INIDENTL, ONSEQUENTIL OR SPEIL DMGES RESULTING FROM NY PRODUT DEFET OR FROM THE USE OR INILITY TO USE THE PRODUT, WHETHER RISING IN ONTRT OR WRRNTY, STTUTE, TORT, STRIT LIILITY, NEGLIGENE, OR OTHERWISE. anner Engineering orp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by anner Engineering orp. opyright Notice ny misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. ny modifications to this product without prior express approval by anner Engineering orp will void the product warranties. ll specifications published in this document are subject to change; anner reserves the right to modify product specifications or update documentation at any time. For the most recent version of any documentation, refer to: anner Engineering orp. ll rights reserved. - Tel: +---