Proximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C
|
|
- Cecilia Morton
- 6 years ago
- Views:
Transcription
1 ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : Fax : sales@ashalain.com Proximity Ideal for High Temperatures and Cleaning Processes EEH CSM_EEH_DS_E EE Quality Proximity Ideal for the Food and Beverage Industry SUS6L Body, IP69K Protect Temperatures and Detergents ion, Resistant to High Improved resistance to detergents and rusting Applicable to 0 C (with DC -wire connection) (Heat resistance verified to,000 hours.) Resists typical detergents and disinfectants used in the food industry Water resistant under high-temperature, high-pressure cleaning based on DIN (Pressure: 8,000 to 0,000 kpa, Water temperature: 80 C, For 0 s at all angles) Be s ure to read Safety Precautions on page 9. Ordering Information s [Refer to Dimensions on page 0.] Pre-wired Models * Appearance Sensing distance Output configuration Operation mode: NO Operation mode: NC DC - wire (polarity) EEH-XD M EEH-XD M M mm DC - wire (no polarity) * EEH-XD-T M --- DC - wire (P NP) EEH-XB M EEH-XB M DC - wire ( NP N) EEH-XC M EEH-XC M DC - wire (polarity) EEH-X7D M EEH-X7D M DC - wire (no polarity) * EEH-X7D-T M --- M8 7 mm DC - wire (P NP) EEH-X7B M EEH-X7B M DC - wire ( NP N) EEH-X7C M EEH-X7C M DC - wire (polarity) EEH-XD M EEH-XD M M0 mm DC - wire (no polarity) * EEH-XD-T M --- DC - wire (P NP) EEH-XB M EEH-XB M DC - wire ( NP N) EEH-XC M EEH-XC M Connector Models Appearance Sensing distance Output configuration Operation mode: NO Operation mode: NC DC - wire (polarity) EEH-XD-MG EEH-XD-MG M mm DC - wire (P NP) EEH-XB-M EEH-XB-M DC - wire ( NP N) EEH-XC-M EEH-XC-M DC - wire (polarity) EEH-X7D-MG EEH-X7D-MG M8 7 mm DC - wire (P NP) EEH-X7B-M EEH-X7B-M DC - wire ( NP N) EEH-X7C-M EEH-X7C-M DC - wire (polarity) EEH-XD-MG EEH-XD-MG M0 DC - wire (P NP) EEH-XB-M EEH-XB-M DC - wire ( NP N) EEH-XC-M EEH-XC-M *. The standard ca ble length is m. An optional 5 m model is also a vaila ble. Contact yo ur OMRO N representati ve for more information. For details, refer to the Proximity s Technical Guide. *. When using a no-polarity model, there is no need to be concerned a bout whether to connect to the positi ve or negati ve side of the po wer s upply. The load can be connected to either the +V side or 0 V side.
2 EEH Accessories (Order Separately) I/O Connectors (M) [Refer to XS.] Appearance Cable length I/O Connector model Applicable Proximity s Straight m XSF-E-D80-E L-shape 5 m XSF-E-G80-E m XSF-E-D80-E EEH-X@ 5 m XSF-E-G80-E Note: The above Connectors conform to DIN standard, provide IP69K protection, have a maximum operating temperature of 05 C, and use SUS6L stainless steel.
3 Ratings and Specifications EEH DC -Wire Models Size M M8 M0 Item Model EEH-XD@ EEH-X7D@ EEH-XD@ Sensing distance mm 7 mm mm Set distance * 0 to. mm 0 to 5.6 mm 0 to 9.6 mm Differential travel 5% max. of sensing distance Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 6.) Standard sensing object Iron, mm Iron mm Iron 6 6 mm Response frequency * 500 Hz 00 Hz 00 Hz Power supply voltage (operating voltage range) Leakage current Control output Indicators Load current Residual voltage * Operation mode (with sensing object approaching) Protection circuits Ambient temperature range to VDC, ripple (p-p): 0% max. (0 to VDC, however, VDC max. at temperatures over 00 C) 0.8 ma max. to 00 ma (however, to 50 ma at 00 to 0 C) Polarity Models: V max. No polarity Models: EEH-X@D@-T: (5 V max. * (Load current: 00 ma, Cable length m) D Models: Operation indicator (red), Setting indicator D Models: Operation indicator D Models: NO Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. D Models: NC Surge suppressor, Load short-circuit protection Operating: 0 to 00 C (0 to 0 C,000 h) * Storage: 5 to 70 (with no icing or condensation) Ambient humidity range 5% to 95% ±0% max. of sensing distance at C in the temperature range of 0 to 70 C. Temperature influence ±5% max. of sensing distance at C in the temperature range of 70 to 00 C. 5% to +0% of sensing distance at C in the temperature range of 00 to 0 C. Voltage influence ±0% max. of sensing distance at rated voltage in the 5% rated voltage range. Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case Dielectric strength,000 VAC, 50/60 Hz for min between current-carrying parts and case Vibration resistance Destruction: 0 to 55 Hz.5-mm double amplitude for hours each in X, Y and Z directions Shock resistance Destruction:,000 m/s, 0 times each in X, Y and Z directions Degree of protection IEC IP67, DIN IP69K *5 Connection method Pre-wired Models (Standard cable length m), Connector Models Weight Pre-wired Models Approx. 80 g Approx. 5 g Approx. 0 g (packed state) Connector Models Approx. 0 g Approx. 55 g Approx. 5 g Case, clamping nut Stainless steel (SUS6L) Materials Sensing surface PBT Cable Heat-resistant PVC cable (Pre-wired model) Accessories Instruction manual *. Use the yellow indicator on D Models as a guide. *. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *. The residual voltage of each EEH-X@D@ DC -Wire Model is 5 V. When connecting to a device, make sure that the device can withstand the residual voltage. (Refer to page 9.) *. Operation with power supplied for,000 h has been verified at 0 C. Do not bend the cable repeatedly at 00 C or higher. *5. IP69K Degree of Protection Specification IP69K is a protection standard against high temperature and high-pressure water defined in the German standard DIN 0050, Part 9. The test piece is sprayed with water at 80 C at a water pressure of 80 to 00 BAR using a specified nozzle shape at a rate of to 6 liters/min. The distance between the test piece and nozzle is 0 to 5 cm, and water is sprayed horizontally for 0 seconds each at 0, 0, 60, and 90 while rotating the test piece on a horizontal plane.
4 EEH DC -Wire Models Size M M8 M0 Item Model EEH-XC@/B@ EEH-X7C@/B@ EEH-XC@/B@ Sensing distance mm±0% 7 mm±0% mm±0% Set distance * 0 to. mm 0 to 5.6 mm 0 to 9.6 mm Differential travel Detectable object 5% max. of sensing distance Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 6.) Standard sensing object Iron, mm Iron mm Iron 6 6 mm Response frequency * 500 Hz 00 Hz 00 Hz Power supply voltage (operating voltage range) Current consumption Control output Indicators to VDC, ripple (p-p): 0% max. (0 to VDC, however, VDC max. at temperatures over 00 C) 0 ma max. 00 ma max. (however, 50 ma max. at 00 to 0 C) Load current Residual voltage V max. (Load current: 00 ma, Cable length m) Operation indicator Operating mode (with sensing object approaching) Protection circuits Ambient temperature range C Models: NO C Models: NC Refer to the timing charts under I/O Circuit Diagrams on page 7 for details. B Models: NO B Models: NC Power supply reverse polarity protection, Surge suppressor, Load short-circuit protection, Reversed output polarity protection Operating: 0 to 00 C (0 to 0 C,000 h) * Storage: 5 to 70 C (with no icing or condensation) Ambient humidity range 5% to 95% ±0% max. of sensing distance at C in the temperature range of 0 to 70 C. Temperature influence ±5% max. of sensing distance at C in the temperature range of 70 to 00 C. 5% to 0% of sensing distance at C in the temperature range of 00 to 0 C. Voltage influence 0% max. of sensing distance at rated voltage in the 5% rated voltage range. Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case Dielectric strength,000 VAC, 50/60 Hz for min between current-carrying parts and case Vibration resistance Destruction: 0 to 55 Hz.5-mm double amplitude for hours each in X, Y and Z directions Shock resistance Destruction:,000 m/s, 0 times each in X, Y and Z directions Degree of protection IEC IP67, DIN IP69K Connection method Pre-wired Models (Standard cable length m), Connector Models Weight Pre-wired Models Approx. 80 g Approx. 5 g Approx. 0 g (packed state) Connector Models Approx. 0 g Approx. 55 g Approx. 5 g Case, clamping nut Stainless steel (SUS6L) Materials Sensing surface PBT Cable Heat-resistant PVC cable (Pre-wired Model) Accessories Instruction manual *. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. *. Operation with power supplied for,000 h has been verified at 0 C. Do not bend the cable repeatedly at 00 C or higher.
5 EEH Resistance to Detergents, Disinfectants, and Chemicals Performance is assured for typical detergents and disinfectants, but performance may not be maintained for some detergents and disinfectants. Refer to the following table when using these agents. The EEH passed testing for resistance to detergents and disinfectants performed using the items in the following table. Refer to this table when considering use of detergents and disinfectants. Category Product name Concentration Temperature Time Sodium hydroxide (NaOH).5% 70 C 0h Potassium hydroxide (KOH).5% 70 C 0h Chemical Phosphoric acid (HPO).5% 70 C 0h Sodium hypochlorite (NaClO) 0.% 5 C 0h Hydrogen peroxide (HO) 6.5% 5 C 0h Alkaline foam detergent P-topax-66s (Manufactured by Ecolab).0% 70 C 0h Acidic foam detergent P-topax-56 (Manufactured by Ecolab) 5.0% 70 C 0h Disinfectant P-oxonia active 90 (Manufactured by Ecolab).0% 5 C 0h Test Conditions Test liquid Depth: 0 cm After the test is completed, check that no problems exist with the following product characteristics. () Appearance (no damage that will affect the product characteristics) () Operation Check (ON/) () Insulation resistance: 50 MΩ min. (at 500 VDC) () Dielectric strength (,000 VAC for minute) (5) Water resistance (IP67) 5
6 Engineering Data Sensing Area Models Distance X (mm) 8 6 (Typical) EEH-X@ EEH 0 8 EEH-X7@ EEH-X@ 6 Y X Distance Y (mm) Influence of Sensing Object Size and Material EEH-X@@ EEH-X7@@ EEH-X@@ Distance X (mm) t = mm X Iron Stainless steel (SUS0) Brass Aluminum Copper Distance X (mm) t = mm X Aluminum Iron SUS Brass Copper Distance X (mm) 0 8 t = mm X Iron SUS Brass Aluminum Copper Side length of sensing object: d (mm) Residual Output Voltage EEH-X@D@ Residual load voltage (V) 5 EEH-X@D@-T EEH-X@D@ Side length of sensing object: d (mm) Leakage Current EEH-X@D@ Leakage current (ma) EEH-X@D@ Side length of sensing object: d (mm) Load current (ma) Power supply voltage (V) 6
7 I/O Circuit Diagrams EEH DC -Wire Models Operating mode Model Timing charts Output circuit Non-sensing area Sensing object Unstable sensing area Set position Stable sensing area Proximity Polarity: Yes Proximity main circuit () Load Brown () Blue 0 V Note: The load can be connected to either the +V or 0 V side. +V NO EEH-X@D-T (%) Rated sensing distance ON Setting indicator ON Operation indicator (red) ON Control output Polarity: None Proximity main circuit Load +V (0 V) 0 V (+V) Note:. The load can be connected to either the +V or 0 V side.. The EEH-X@D@-T has no polarity. Therefore, you do not need to consider the polarity. NC EEH-X@D EEH-X@D-MG Non-sensing area Sensing object Sensing area (%) 00 0 Rated sensing distance Proximity sensor Proximity main circuit () Load Brown () +V ON Operation indicator ON Control output Blue 0 V Note: The load can be connected to either the +V or 0 V side. DC -Wire Models Operating mode Output specifications Model Timing charts Output circuit NO NC NPN Open-collector output EEH-X@C EEH-X@C Present Sensing object Not present Operation indicator ON Control output ON Present Sensing object Not present Operation indicator ON Control output ON Proximity main circuit () Brown () () Black or () Blue Note: Use pin,, and for NO. Use pin,, and for NC. Load +V 0 V NO NC PNP Open-collector output EEH-X@B EEH-X@B Present Sensing object Not present Operation indicator Control output ON ON Present Sensing object Not present Operation indicator ON Control output ON Proximity main circuit () Brown () () Black () Blue Note: Use pin,, and for NO. Use pin,, and for NC. Load +V 0 V 7
8 Connections for I/O Connectors EEH Connection diagram No. Type Proximity Operating mode Model I/O Connector model Connections EEH XSF * DC -wire (IEC pin wiring) NO EEH-X@D-MG Main circuit EEH XSF * Brown (+) White (not connected) Blue (not connected) Black ( ) NC EEH-X@D-MG : Straight : L-shape Main circuit Brown (+) White ( ) Blue (not connected) Black (not connected) NO EEH-X@B-M EEH-X@C-M XSF-E@-@80-E D: -m cable G: 5-m cable EEH XSF * Main circuit Brown (+V) White (not connected) Blue (0 V) Black (output) DC -wire EEH XSF * NC EEH-X@B-M EEH-X@C-M Main circuit Brown (+V) White (output) Blue (0 V) Black (not connected) *XSF wire colors differ from Proximity wire colors. Refer to the I/O Connector Group Catalog (Cat. No. X07) for details. 8
9 Safety Precautions EEH Refer to Warranty and Limitations of Liability for details. WARNING This product is not designed or rated for ensuring safety of persons either directly or indirectly. Do not use it for such purposes. Precautions for Correct Use Do not use this product under ambient conditions that exceed the ratings. Design Influence of Surrounding Metal When mounting the within a metal panel, ensure that the clearances given in the following table are maintained. Influence of Surrounding Metal DC -wire EEM- X@D@ DC -wire EEH-X@B@ EEH-X@C@ l m (Unit: mm) Type Item M M8 M0 D d dia. l..6 6 d D..6 6 m 5 n l..6 6 d D..6 6 m 5 n l n m AND/OR Connections Error pulses and leakage current may prevent application in AND or OR circuits. Always confirm operation in advance to confirm if there are any problems in operation. Mutual Interference When installing s face-to-face or side-by-side, ensure that the minimum distances given in the following table are maintained. A Mutual Interference Type Item M M8 M0 DC -wire EEH-X@D@ DC -wire EEH-X@B@ EEH-X@C@ A B (Unit: mm) A B A B Connecting a DC -wire Proximity to a PLC (Programmable Controller) Required Conditions Connection to a PLC is possible if the specifications of the PLC and Proximity satisfy the following conditions. (The meanings of the symbols are given below.). The ON voltage of the PLC and the residual voltage of the Proximity must satisfy the following. VON VCC VR. The current of the PLC and the leakage current of the Proximity must satisfy the following. I Ileak (If the current is not listed in the specifications, take it to be. ma.). The ON current of the PLC and the control output of the Proximity must satisfy the following. IOUT (min) ION IOUT (max) The ON current will vary, however, with the power supply voltage and the input impedance, as shown in the following equation. ION = (VCC VR VPC) / RIN Example In this example, the above conditions are checked when the PLC Unit is the C00H-ID, the Proximity is the EEH-X7D-T, and the power supply voltage is V.. VON (. V) VCC (0. V) VR (5 V) = 5. V : OK. I (. ma) Ileak (0.8 ma) : OK. ION = [VCC (0. V) VR (5 V) VPC ( V)] / RIN ( kω) Approx..8 ma Therefore, IOUT (min) ( ma) ION (.8 ma) : OK VON: ON voltage of PLC (. V) ION: ON current of PLC (typ. 7 ma) I: current of PLC (. ma) RIN: Input impedance of PLC ( kω) VPC: Internal residual voltage of PLC ( V) VR: Output residual voltage of Proximity (5 V) Ileak: Leakage current of Proximity ( to 00 ma) IOUT: Control output of Proximity ( to 00 ma) VCC: Power supply voltage (PLC: 0. to 6. V) Values in parentheses apply to the following PLC model and Proximity model. PLC: C00H-ID : EEH-X7D-T 9
10 Mounting Tightening Force Do not tighten the nut with excessive force. EEH Model M M8 M0 Torque 0 N m 70 N m 80 N m Dimensions (Unit: mm) Pre-wired Models () Mounting Hole Dimensions Connector Models () Mounting Hole Dimensions F F Dimensions M M8 M0 F (mm).5 0 dia dia dia. Dimensions M M8 M0 F (mm).5 0 dia dia dia M@ M Indicator M Two clamping nuts *-dia. -conductor heat-resistant PVC cable (Conductor cross section: 0. mm, insulator diameter:. mm), Standard length: m. -dia. -conductor heat-resistant PVC cable (Conductor cross section: 0. mm, insulator diameter:. mm), Standard length: m. * M Indicator Two clamping nuts 8 0 -M@ M Indicator * M8 Two clamping nuts *6-dia. -conductor heat-resistant PVC cable (Conductor cross section: 0.5 mm, insulator diameter:.9 mm), Standard length: m. 6-dia. -conductor heat-resistant PVC cable (Conductor cross section: 0.5 mm, insulator diameter:.9 mm), Standard length: m. M8 Two clamping nuts Indicator -M@ Indicator * M0.5 Two clamping nuts *6-dia. -conductor heat-resistant PVC cable (Conductor cross section: 0.5 mm, insulator diameter:.9 mm), Standard length: m. 6-dia. -conductor heat-resistant PVC cable (Conductor cross section: 0.5 mm, insulator diameter:.9 mm), Standard length: m. M0.5 Indicator Two clamping nuts M ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : Fax : sales@ashalain.com 0
E8EB-N0C2B E8EB-N0B2B
Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree
More informationE6C-N. Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders
Multi-turn High-precision Encoder Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders Reset function for easy origin alignment when built-into equipment. Multi-turn
More informationDigital display Pressure range ON/OFF output Linear output Model No Positive pressure 0 to 98 kpa (0 to 1 kgf/cm 2 ) NPN open collector o 1 to o5
Pressure Sensor E8CC with Built-in Microcomputer and Digital Display and New E8CB General-purpose Model Withstands a of 490 kpa (5 kgf/cm 2 ) and highly reliable. Incorporates a two-turn adjuster ensuring
More informationCS Series. Capacitance Type. Type. Proximity Sensor. Features
INFORMATI Series Features Capacitance Type - Metal cylinder/resin cylinder/square type - Non-metal objects such as wood, paper, plastic and water can be detected. - The operating distance is adjustable
More informationPressure. 1 Fitting PA R - N R2
INTERNAL STRUCTURE (R 1/4) 4 1 2 3 FEATURES High corrosion resistance and drip-proof construction port attachment made of Proven IP-65 grade gauge body (IP-65 in accordance with IEC) Standard product provides
More informationPressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
More informationFitting PS P - B - R2
INTERNAL STRUCTURE PS86 (G 3/8) 2 3 FEATURES Solidstate pressure switch with no mechanical moving parts Isolated output via a photo-coupler Switching pressure adjustable and hysteresis band adjustable
More informationT20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en
T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission
More informationSafety Precautions WARNING If critical situations that could lead to user s death or serious injury is assumed by mishandling of the product.
Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly, read this User s Manual thoroughly before use. Make sure
More informationMODEL: R7K4FML3. Remote I/O R7K4F Series. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.)
Remote I/O R7KF Series I/O MODULE (-III) POWER INPUT DC power R: V DC (Operational voltage range: ±0 %; ripple 0 %p-p max.) 0 (8.7). (.) 7(.8) mm (inch) [] OPTIONS (multiple selections) Output data read
More informationRoHS. Versatile. X g. X 2 e
s IN8, - and The inclinometers of the IN8 series allow measuring inclinations in the range of ±85 or -dimensional inclinations up to 0. With their high robustness, their protection level up to max. IP9k
More informationW250: Compact photoelectric switch series for a broad range of applications
W0 Photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W0: Compact photoelectric switch series for a broad range of applications
More informationCapacitors with screw terminals Long life industrial 85 C 12000h
FET2,FET4 Long Life Grade Capacitors Applications Uninterruptible power supplies Frequency converters FET2 FET4 For Wind power and Solar Power Features All-welded construction ensures reliable electrical
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationPTF30 Series. Features. Ordering information. G 6 N N F8 (0 to 5 kgf/cm 2 ) PTF30
eries Features Best pressure transmission solution for small and middle sized project such as indoor heating and air conditioning, water and sewer, or incinerator, etc. Improves noise resistance and minimize
More informationAUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY HAH1BVW S/08 Introduction The HAH1BVW family is for the electronic measurement of DC, AC or pulsed currents in high power and low voltage automotive applications
More informationWT 27 L-2 Laser Photoelectric proximity switches, background suppression -- DC. Dimensional drawing Adjustments possible WT 27L-2F 430
WT L- Laser Photoelectric proximity switches, background suppression -- DC 00...00 mm Photoelectric proximity switches Dimensional drawing.. Laser LED, red light Adjustable background suppression 0 0.
More information5SJ4...-.HG Circuit Breakers to IEC and UL 489
Siemens AG 009 5SJ...-.HG Circuit Breakers to IEC and UL 89 BETA Low-Voltage Circuit Protection Compliance with industry standards is a must in today's manufacturing environment. Worldwide acceptance is
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER
ISOCON-6 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationNumber of poles 1-pole 2-pole Minimum Enclosure Contact G2R-1A-E G2R-1-E
The Best Seller eneral purpose power elays of single-pole0 A and double-pole A. Safety-oriented design with dielectric strength of,000 V between coil and contacts, and surge resistance of 0,000 V. and
More informationISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER
ISOCON-3 MAINS POWERED ISOLATING SIGNAL CONVERTER CAUTION: This equipment is designed for connection to mains voltages and must be used in accordance with this guide. If it is not, the safety protection
More informationPHOENIX CONTACT - 04/2016. Features
Signal conditioner Data sheet 100238_de_06 1 Description PHOENIX CONTACT - 04/2016 Features The MCR-C-UI-UI(-450)-DCI(-NC) 3-way isolation amplifier is used to electrically isolate and convert analog signals.
More informationField IT 50T Series Transmitters
Data Sheet SS/G/A_ Field IT 0T Series Transmitters gauge/absolute pressure transmitter Ranges: -00 to 0000kPa - to 00bar -. to 6000psi Base accuracy : 0.% (BFSL) Chemical Vapour Deposition (CVD) technology
More informationPG-200/PG-208 PRESSURE GAUGES P G G P P
Digital 3 1/2 digits monitor Set button for switch output HI or LO (PG-200) (PG-208) Digital 3 1/2 digits Power switch LO setting VR for switch output LO HI setting VR for switch output HI SPAN adjustment
More informationCapacitive Sensors. Contents
Contents Capacitive sensors detect the change in capacitance caused by the approach of an object. Their advantage lies in the ability to detect virtually any material, from metals to oils. 4.2 Definitions,
More information50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
More informationTYPE. max. working voltage 250 V 350 V 500 V 750 V. max. overload voltage 500 V 700 V 1000 V 1500 V. basic specifications IEC B
FEATURES Non inductive High pulse loading capability. APPLICATIONS Application for overload and high voltage surge hazard circuits. DESCRIPTION A carbon film is deposited on a high grade ceramic body.
More informationThermal-Magnetic Circuit Breaker 2210-T2...
Thermal-Magnetic Circuit Breaker 0-T... Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Featuring
More informationAmphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
More informationThe Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:
The basic PC software is supplied free with the recorder. There is an additional charge for the extensive Data Acquisition Software supplied with communication of RS-232/422/485 or Ethernet. The Ordering
More informationDIGITAL THERMOMETER OPERATOR S MANUAL
DIGITAL THERMOMETER OPERATOR S MANUAL 51 206-3722 52 206-3738 DIGITAL THERMOMETER OPERATOR'S MANUAL RS 51 206-3722 RS 52 206-3738 1 2 INTRODUCTION 1-1 Unpacking and Inspection Upon removing your new Digital
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationMetallized polyester film capacitors MKT 470
MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated
More informationALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET
TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING
More informationIndustrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationConnector~Tech Providing Harsh Environment Connector
Connector~Tech www.connectortech.com.au Providing Harsh Environment Connector SOLUTIONS Tajimi TC18 series connectors are water-pro up to 30 meters in depth. Economical and highly reliable construction
More informationIndustrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationEMI Suppression PCRC 420 film capacitors (RC unit)
MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NP series I P N = 4, 6, 12, 15 A Ref: HO 4-NP, HO 6-NP, HO 12-NP, HO 15-NP For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary
More informationW 9 L: Laser photoelectric switches: small, light and reliable
W 9 Laser photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 9 L: Laser photoelectric switches: small, light and reliable The
More informationTHM80X Series Feature Application. Temperature & Humidity / Flow Measuring Specialist
THM80X Series Feature Application IP67 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear adjustment temperature & humidity by computer,
More informationAluminum Capacitors Power Printed Wiring Style
FEATURES Polarized aluminum electrolytic capacitors, non-solid electrolyte Large types, cylindrical aluminum case, insulated Provided with keyed polarity Very long useful life: 000 h at 8 C Low ESR, high
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LDSR 0.3-TP/SP1 I P R N = 300 ma For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed
More informationPressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
More informationPLASTIC FILM CAPACITORS
PLASIC FILM CAPACIORS APPLICAION GUIDELINES FOR PLASIC FILM CAPACIORS 1.Circuit Design (1) Please make sure that the environmental and mounting conditions in which the capacitor will be exposed are within
More informationW 30 Photoelectric proximity switches: Clear signals even with low remission
W 0 Photoelectric proximity switches Photoelectric proximity switches, BGS Photoelectric proximity switches, energetic W 0 Photoelectric proximity switches: Clear signals even with low remission In addition,
More informationFEATURES APPLICATIONS DESCRIPTION QUICK REFERENCE DATA. PILKOR components
FEATURES Excellent anti-surge characteristics Stable characteristics to moisture resistance even in high resistance range. Good replacement for ceramic plate resistors. APPLICATIONS Telecommunication Industrial
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationInterference suppression film capacitors MKP 336 1
MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
More informationDS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
More informationDATA SHEET POSITIVE TEMPERATURE COEFFICIENT AC/DC POWER SUPPLY SMD0603 series
Product specification November 05, 201 V.0 DATA SHEET AC/DC POWER SUPPLY series RoHS compliant & Halogen free 2 Positive Temperature Coefficient (PTC) Data Sheet Description The 0603 series provides miniature
More informationFunkentstör-Kondensatoren der Klasse X2
STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case
More informationV 12: Miniature photoelectric switches in M 12 housings
Lichtschranken Photoelectric Baureihe switcheswl 7- Photoelectric proximity switches Photoelectric reflex switches : iniature photoelectric switches in housings Through-beam photoelectric switches They
More informationRF (Radio Frequency) C R 20 Type
RF (Radio Frequency) C R Type (by) PhotoMOS RELAYS.±..69±.8.±..7±.8.±..8±.8 mm inch FEATURES. Low output capacitance between output terminals and low ON-resistance capacitance(c):.pf (typ.) ON resistance(r):
More informationSTATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
More informationHydraulic Pressure NAH Applications. Features. New generation available - refer to
NAH 8 Hydraulic Pressure Transmitter New generation available - refer to www.trafag.com/h70 Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NSM series I PN = 8, 15, 25 A Ref: HO 8-NSM, HO 15-NSM, HO 25-NSM For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the
More informationDC Film Capacitors MKT Radial Lacquered Type
l 467 w FEATURES Available taped and loose in box RoHS compliant Seating plane (1) h APPLICATIONS Blocking and coupling, bypass and energy reservoir. α (2) l t REFERENCE STANDARDS IEC 60384-2 MARKING C-value;
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationDS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
More informationLow Differential Pressure Gage
Low Differential Pressure Gage NEW Manostar Gage Panel installation compact type Low Differential Pressure Gage RoHS compliant Utility model registration No.2027772 Compact and lightweight type Even when
More informationFLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:
abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com
More informationHigh-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
More informationTL-N/TL-Q. A Wealth of Models for All Types of Applications. Rectangular Standard Proximity Sensor. Ordering Information
Rectangular Stanar Proximity Sensor TL-N/TL-Q CSM_TL-N/TL-Q_DS_E Wealth of Moels for ll Types of pplications Easy installation, high-spee pulse generator, high-spee rotation control, an more. Direct mounte
More informationMKV AC Capacitors Damping B High dielectric strength High peak-current capability Especially suitable for snubber circuits
MKV AC Capacitors B 25 835 High dielectric strength High peak-current capability Especially suitable for snubber circuits Construction Self-healing Plastic dielectric Oil-impregnated tubular windings (no
More informationhandbook, 050/052 4 columns smaller
4/5 PED-ST FEATURES Polarized aluminium electrolytic capacitors, non-solid Large types, cylindrical aluminium case, insulated with a blue sleeve Also available in bolt version (PED-STB) Pressure relief
More informationAluminum Capacitors Power Long Life Snap-In
0/0 PLL-SI PUL-SI smaller dimensions 0/0 PLL-SI QUICK REFERENCE DATA DESCRIPTION VALUE 0 0 Nominal case sizes (Ø D x L in mm) x to x 0 Rated capacitance range (E series), to 000 µf Tolerance on ± 0 % Rated
More informationCGS ALUMINUM ELECTROLYTIC CAPACITORS
CGS ALUMINUM ELECTROLYTIC CAPACITORS EXTREME APPLICATON HIGHLIGHTS APPLICATION Capacitance 50-500,000µF U.P.S Systems Voltage 15 to 500 WVDc Inverters/P.C.U.s. -10%, + 20% Tolerance and Motor Special Controls
More information5SP and 5SY Supplementary Protection UL 1077
Product Guide 5SP and 5SY Supplementary Protection UL 077 for North merican and International applications usa.siemens.com/5sy Table of contents Certifications, standards, features and description Characteristic
More information400 Volts, 50HZ 480 Volts, 60HZ 600 Volts, 60HZ TECHNICAL REFERENCE MANUAL
400 Volts, 50HZ 480 Volts, 60HZ 600 Volts, 60HZ TECHNICAL REFERENCE MANUAL FORM: MAP-TRM-E REL. July 2013 REV. 015 2013 MTE Corporation IMPORTANT USER INFORMATION NOTICE The MTE Corporation Matrix AP Harmonic
More informationModel Operation mode. TL-Q2MC1 2M DC 3-wire, NPN TL-Q5MC1 2M *1 *2 TL-Q5MC2 2M
Rectangular Stanar Proximity Sensor TL-N/TL-Q CSM_TL-N/TL-Q_DS_E Wealth of Moels for ll Types of pplications Easy installation, high-spee pulse generator, high-spee rotation control, an more. Direct mounte
More informationWIESON TECHNOLOGIES CO., LTD.
TABLE OF CONTENT 1. Scope.... 2 2. Reference Documents. 2 3. Material and Components.... 2 4. Design and Construction.... 2 5. Rating.. 2 6. Performance and Test Descriptions. 2 7. Test Requirements and
More informationLinear measuring technology
Their extremely robust construction, their high IP69k protection level and their wide temperature range make these new draw wire encoders particularly reliable and durable. Their flexibility and adaptability
More informationBEFORE USE... POINTS OF CAUTION COMPONENT IDENTIFICATION INSTRUCTION MANUAL MODEL R7K4DH-1-DAC32D R7K4DH-1-DAC32D
INSTRUCTION MANUAL PNP DISCRETE INPUT & PNP TRANSISTOR OUTPUT MODULE, 6 points each (High-speed Link System, e-con connector) R7KDH--DACD MODEL R7KDH--DACD BEFORE USE... Thank you for choosing M-System.
More information/2 way valves (solenoid actuated diaphragm with forced lifting) 1/4... 2
/ way valves (solenoid actuated diaphragm with forced lifting) /4... Damped operation Operation without differential Suitable for vacuum igh flow rate For systems with low or fluctuating Brass body Wide
More informationQualification Test Report
Qualification Test Report 501-97 28Jun10 Rev E Connector, Shielded, Miniature Circular DIN, PCB Mounted 1. INTRODUCTION 1.1. Purpose Testing was performed on Tyco Electronics Mini DIN Printed Circuit Board
More informationNon-Contact Safety Systems CMS
Selection table for non-contact safety system // Evaluation units Connection Desi Read head contact assembly Assured switch-on distance S ao [mm] Assured switch-on distance S ar [mm] Number of outputs
More informationDigital Current Transducer HO-SW series I P N = A. Ref: HO 100-SW; HO 150-SW; HO 200-SW; HO 250-SW
Digital Current Transducer HO-SW series I P N = 100... 250 A Ref: HO 100-SW; HO 150-SW; HO 200-SW; HO 250-SW Bitstream output from on onboard Sigma Delta modulator. For the electronic measurement of current:
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer HO-NP/SP33 series I PN = 8, 15, 25 A Ref: HO 8-NP/SP33, HO 15-NP/SP33, HO 25-NP/SP33 For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationAPPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
More informationSingle point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
More informationPOINTS OF CAUTION BEFORE USE...
INSTRUCTION MANUAL NPN DISCRETE INPUT & NPN TRANSISTOR OUTPUT MODULE, 6 points each (-I/-II, e-con connector) MODEL BEFORE USE... Thank you for choosing M-System. Before use, check the contents of the
More informationBETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
More informationSingle cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style
Type Model/size Stroke -SS-0-N. -SS-0-N. Single cam type -SS- 7. -SS-. -SS-4. -SD-0 Double cam type -SD- -SD-4. Screw type straight style Screw type tee style -FS- -FT- -FS- -FT- 0.9 1. 1.. 1. 4 Grip forcen
More informationH i g h A m p e r a g e 2 5 t o A M P. T y p e I & I I I V e h i c l e P r o t e c t i o n. I P 6 7 W a t e r p r o o f
H i g h A m p e r a g e 2 5 t o 3 0 0 A M P T y p e I & I I I V e h i c l e P r o t e c t i o n I P 6 7 W a t e r p r o o f I g n i t i o n - P r o t e c t e d S A E & A B Y C C o m p l i a n t L E D T
More informationAluminum Electrolytic Capacitors Power Economic Printed Wiring
Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated
More informationImformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
More informationCharacteristics Climatic Category 40/85/56 (IEC 61071) Operating Temperature. 700 ~ 2000 VDC Capacitance Range 0,2 ~ 7,5 µf Capacitance Tolerance
Polypropylene Film Capacitors for Snubber Applications Features - Very low dissipation factor - Highest peak pulse capability - Double-sided metallized electrodes - Internal series connection - Metal sprayed
More informationThis specification covers the requirements for product performance, test methods and quality assurance provisions of FG Terminal.
DESIGN OBJECTIVES The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore AMP Ltd makes no representation or warranty, express
More informationPRODUCT SPECIFICATIONS
FEATURES AND BENEFITS* Up to 14 year DC life 56V DC working voltage Resistive cell balancing Overvoltage outputs High power density 4U, half-rack package UL registered TYPICAL APPLICATIONS UPS systems
More information473 Dew Point Hygrometer
gh Performance Chilled Hygrometer With Cable Mounted Measuring Heads ghly precise chilled mirror dew point technology Cable mounted dew point and temperature measurement Aspirated and direct insertion
More information