SFRV Polymer PTC Thermistor SFRV ROHS

Size: px

Start display at page:

Download "SFRV Polymer PTC Thermistor SFRV ROHS"

Brook Johnson
5 years ago
Views:

1 Polymer PTC Thermistor ROHS Features High voltage endurance. Designed for telecom applications. Low parasitic capacitance, flat impedance with frequency. RoHS compliant and UL certificate(file No.:E305346). Fast response time. Design for lead free solder termination. Low resistance. Applications Transmission equipment Such as Central Office linecard, DLC linecard, NGN linecard, MSAN linecard, FTTx linecard... Customer Premises Equipment (CPE) Such as IAD-VoDSL, ATA, STB, VoIPGW, VoCable, Wireless VoIP router, PC telephony card... PBX's and other switches Primary protection including main distribution frames, building entrance equipment and station protection modules. Typical circuit for VoIP FXS Linecard Polymer PTC Thermistor 1

2 Polymer PTC Thermistor ROHS Basic reference data PARAMETER VALUE UNIT Maximum voltage (RMS) 250 V Temperature range -5 to +85 C Weight ~0.298 g Electrical Characteristics Part number R(25 ) V max I max I H I T T s (1A) Pd typ (Ω) (VAc) (A) (ma) (ma) (S) (W) 5~ <1.0 1 A 8~ <1.0 1 B 7~ <1.0 1 C 5~ <1.0 1 R(25 C): Device resistance at 25 C still air. IH:Hold current: maximum current at which the device will not trip at 25 still air. IT:Trip current: minimum current at which the device will always trip at 25 still air. Vmax:Maximum interrupt voltage device can withstand without damage at rated current. Imax:Maximum fault current device can withstand without damage at rated voltage. Ttrip:Maximum time to trip(s) at assigned current. Pdtyp:Typical power dissipation: typical amount of power dissipated by the device when in state air environment. Typical Time-to-Trip Curves at 25 C : Polymer PTC Thermistor 2

3 Polymer PTC Thermistor ROHS Thermal Derating [ Hold Current (A) at Ambient Temperature ( )] Part number Maximum Ambient Operating Temperature ( ) ) Note: 1) The thermal derating of A B and C is same as Reliability Characteristics No. ITEM CONDITION OF TEST ACCEPTANCE 1 Resistance In still 25 R min R R max 2 Time to Trip Specified current, V max, 25 T maximum Time to Trip 3 Hold Current 60min, at I H No trip 4 Trip Cycle Life V max, I max, 20 cycles No arcing or burning 5 Trip Endurance V max, 15min No arcing or burning Environmental Specifications No. ITEM CONDITION OF TEST 1 Vibration Test The chip ( Mounted on board ) is vibrated in the frequency range of 10~50~10Hz and in the constant vibration amplitude of 1.5mm. This motion is applied for the period of 2 hours in each of 3 perpendicular directions (X-Y-Z axis). 2 Dropping Test The chip is mounted on board, and dropped n the wooden board from 75cm. 3 Dry Temperature Ta=85, 1000hours 4 Low-temperature Ta=-5, 1000hours 5 Thermal Shock -5 30min, 85 30min, 5 cycles 6 Resistance to Soldering heat 260±10,10second 7 Damp-heat Steady-state Test Ta=85, RH=85%, 1000hours 8 Solvent resistance Test IPA, 2min, 25 Polymer PTC Thermistor 3

Polymer PTC Thermistor ROHS Product Demension (mm) Part Number A B C D E Lead Max Max Max Min Min Size(Φ) 1) 6.5 11 4.6 4.7 5.1 0.

4 Polymer PTC Thermistor ROHS Product Demension (mm) Part Number A B C D E Lead Max Max Max Min Min Size(Φ) 1) Note: 1) The dimension of A B and C is same as Recommended PAD Hole and Products Mark S A B Unit mm Mark Polymer PTC Thermistor 4

5 Polymer PTC Thermistor ROHS Wave Solder Recommendation Recommended wave soldering methods. Devices can be cleaned using standard industry methods and solvents. If a device is removed from the board, it should be discarded and replaced with a new device. Leaded devices are not designed to be compatible with reflow soldering manufacturing operations. Lead free wave soldering curve. NOTE If wave solder temperatures exceed recommended profile, devices may not meet the performance requirements, If the wave soldering curve can not satisfy your product, please contact SEMITEL. Storage The production should be in the environment of good ventilation. The indoor temperature is -40 ~+55,and the relative humidity 85% (at 25 ),without acid, alkali and other harmful impurity. Polymer PTC Thermistor 5

6 Polymer PTC Thermistor ROHS Package Information Component Net Weight Gross Bag QTY Box QTY Package Weight Per Box Weight/Per Box Box Outline PCS PCS g Kg Kg mm Tape Contact information SEMITEL INTERNATIONAL LIMITED 14H, Universal Industrial Building, Shan Mei Street, Fotan, Shatin, Hong Kong Tel: Fax: info@semiteltech.com Rev. letter C Date 2010/3/1 Design Check Audit Approve ann martin fred fred Polymer PTC Thermistor 6

Resistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%

Resistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35% Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File