MF-MSMF Series - PTC Resettable Fuses

Transcription

1 *RoHS and AE-Q00 OMPLIANT Features ompliant with AE-Q00 Rev-- Stress Test Qualification for Passive omponents 00 % electrically compatible with all previous generations of 8 SMT devices ompatible with Pb and Pb-free solder reflow profiles RoHS compliant* and halogen free** Surface mount packaging for automated assembly Agency recognition: Standard 453 mm (8 mils) footprint Patents pending Electrical haracteristics Model V max. Volts I max. Amps I hold I trip Resistance Amperes Ohms Amperes Max. Time To Trip Seconds Tripped Power Dissipation Watts Hold Trip R Min. R Max. Typ. MF-MSMF MF-MSMF MF-MSMF MF-MSMF00/ MF-MSMF MF-MSMF MF-MSMF050/30X MF-MSMF050/40X*** MF-MSMF MF-MSMF075/ MF-MSMF MF-MSMF0/ MF-MSMF0/4X MF-MSMF MF-MSMF MF-MSMF50/ MF-MSMF50/4X MF-MSMF MF-MSMF MF-MSMF50/6X*** MF-MSMF ***TUV approval pending. Environmental haracteristics Operating Temperature to +85 Passive Aging , 000 hours... ±5 % typical resistance change Humidity Aging , 85 % R.H. 000 hours... ±5 % typical resistance change Thermal Shock to -40, 0 times... ±0 % typical resistance change Solvent Resistance... MIL-STD-0, Method 5... No change Vibration... MIL-STD-883, Method 007.,... No change ondition A Moisture Sensitivity Level (MSL)... Level... lass 6 Test Procedures And Requirements For Model MF-MSMF Series Test Test onditions Accept/Reject riteria Visual/Mech.... Verify dimensions and materials... Per MF physical description Resistance... In still 3... Rmin R Rmax Time to Trip T max. time to trip (seconds) Hold urrent min. at Ihold... No trip Trip ycle Life... Vmax, Imax, 00 cycles... No arcing or burning Trip Endurance... Vmax, 48 hours... No arcing or burning Solderability... ANSI/J-STD % min. coverage UL File Number... No. E74545, or click here , or click here WARNING ancer and Reproductive Harm - * RoHS Directive 00/95/E Jan. 7, 003 including annex and RoHS Recast 0/65/EU June 8, 0. **Bourns is using the definition that appears to be the prevalent definition used as the industry standard at this time. The Bourns definition of halogen-free is: Bromine (Br) content: 900 ppm; hlorine (l) content: 900 ppm; Total Br + l content: 500 ppm.

2 Applications Overcurrent and overtemperature protection of electronics Hard disk drives P motherboards P peripherals Point-of-sale (POS) equipment PMIA cards USB port protection - USB.0, 3.0 & OTG HDMI.4 Source protection Product Dimensions (see next page for outline drawings) Model MF-MSMF00 MF-MSMF04 MF-MSMF00 MF-MSMF00/60 MF-MSMF030 MF-MSMF050 MF-MSMF050/30X MF-MSMF050/40X MF-MSMF075 MF-MSMF075/4 MF-MSMF0 MF-MSMF0/6 MF-MSMF0/4X MF-MSMF5 MF-MSMF50 MF-MSMF50/ MF-MSMF50/4X MF-MSMF60 MF-MSMF00 MF-MSMF50/6X MF-MSMF60 A B D Min. Max. Min. Max. Min. Max. Min (0.7) (0.86) (0.) (0.34) (0.06) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.06) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.033) (0.0) (0.7) (0.86) (0.) (0.34) (0.08) (0.033) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.90) (0.) (0.34) (0.08) (0.063) (0.0) (0.7) (0.86) (0.) (0.34) (0.09) (0.033) (0.0) Style Packaging: MF-MSMF00 through MF-MSMF030 = 500 pcs. per reel. MF-MSMF050 through MF-MSMF60 = 000 pcs. per reel. MF-MSMF0/4X, MF-MSMF50/4X & MF-MSMF50/6X = 500 pcs. per reel. DIMENSIONS: MM (INHES)

3 Product Dimensions (see previous page for dimensions) Style Top and Bottom View A Side View Recommended Pad Layout.5 ± 0.05 (.059 ±.00).5 ± 0.05 (.059 ±.00) Terminal material: Electroless Ni under immersion Au Termination pad solderability: B 3. ± 0. (0.6 ±.004) Meets ANSI/J-STD-00D ategory. D.7 ± 0. (.06 ±.004) Recommended Storage: 40 max./70 % RH max. Style Top View Bottom View Side View Recommended Pad Layout A 8 B.95 ± 0.0 (.4 ±.004) D.68 ± 0.05 (.066 ±.00) 3. ± 0.0 (. ±.004) Typical Time to Trip 00 MF-MSMF00 MF-MSMF50/ MF-MSMF0/4X MF-MSMF00 The Time to Trip curves represent typical performance of a device in a simulated application environment. Actual performance 0 MF-MSMF030 other variables. MF-MSMF050/40X MF-MSMF50/4X Time to Trip (Seconds) 0. MF-MSMF60 MF-MSMF50/6X 0.0 MF-MSMF60 MF-MSMF50 MF-MSMF5 MF-MSMF04 & MF-MSMF00/60 MF-MSMF0 MF-MSMF075 MF-MSMF00 MF-MSMF0/6 MF-MSMF075/ MF-MSMF050 MF-MSMF050/30X Fault urrent (Amps)

4 Thermal Derating hart - Ihold (Amps) Ambient Operating Temperature Model MF-MSMF MF-MSMF MF-MSMF MF-MSMF00/ MF-MSMF MF-MSMF MF-MSMF050/30X MF-MSMF050/40X MF-MSMF MF-MSMF075/ MF-MSMF MF-MSMF0/ MF-MSMF0/4X MF-MSMF MF-MSMF MF-MSMF50/ MF-MSMF50/4X MF-MSMF MF-MSMF MF-MSMF50/6X MF-MSMF Temperature T P T L TS MAX. TS MIN. 5 t s PREHEAT RAMP-UP t p t L RITIAL ZONE TL TO TP RAMP-DOWN Notes: MF-MSMF models cannot be wave soldered or hand soldered. Please contact Bourns for soldering recommendations. All temperatures refer to topside of the package, measured on the package body surface. y Excess solder may cause a short circuit, especially during hand soldering. Please refer to the Multifuse Polymer PT Soldering Recommendation guidelines. t 5 * TO PEAK 8 MINS. Time How to Order MF - MSMF 075/4 - Multifuse Product Designator Series MSMF = 453 mm (8 mils) Surface Mount omponent Hold urrent, Ihold (0.0 Amps -.60 Amps) Higher Voltage Option Blank = Standard Voltage /, /6, /4, /30, /40, /60 X = Multifuse freexpansion Design MF-MSMF Series Packaging Packaged per EIA = Tape and Reel Typical Part Marking Represents total content. Layout may vary. 5Y BI-WEEKLY DATE ODE: WEEKS = Y YEAR ODE: 5 = 005 PART IDENTIFIATION EXAMPLES: MF-MSMF00 = 0 MF-MSMF050 = 50 MF-MSMF075 & 075/4 = 75 MF-MSMF0 & 0/6 = MF-MSMF50 & 50/ = 5 MF-MSMF00 = 0 PART IDENTIFIATION EXAMPLES: MF-MSMF00/60 = MF-MSMF050/30X & /40X = 4 MF-MSMF0/4X = 6 MF-MSMF50/4X = 8 MF-MSMF50/6X = BI-WEEKLY DATE ODE: WEEKS 5-6 = MF-MSMF SERIES, REV. AO, /8 The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at 8

5 MF-MSMF Series Tape and Reel Specifications MF-MSMF-0/4X MF-MSMF00 - MF-MSMF050 - MF-MSMF50/4X MF-MSMF030 MF-MSMF60 MF-MSMF50/6X Tape Dimensions per EIA-48- per EIA 48- per EIA 48- W.0 ± ± ± 0.30 (0.47 ± 0.0) (0.47 ± 0.0) (0.47 ± 0.0) 4.0 ± ± ± 0.0 P 0 (0.57 ± 0.004) (0.57 ± 0.004) (0.57 ± 0.004) 8.0 ± ± ± 0.0 P (0.35 ± 0.004) (0.35 ± 0.004) (0.35 ± 0.004).0 ± ± ± 0.05 P (0.079 ± 0.00) (0.079 ± 0.00) (0.079 ± 0.00) 3.58 ± ± ± 0.0 A 0 (0.4 ± 0.004) (0.44 ± 0.006) (0.46 ± 0.004) 4.93 ± ± ± 0.0 B 0 (0.94 ± 0.004) (0.96 ± 0.004) (0.00 ± 0.004) B max (0.3) (0.3) (0.3) / / /-0.0 D 0 ( /-0) ( /-0) ( /-0) F 5.5 ± ± ± 0.05 (0.7 ± 0.00) (0.7 ± 0.00) (0.7 ± 0.00).75 ± ± ± 0.0 E (0.069 ± 0.004) (0.069 ± 0.004) (0.069 ± 0.004) E min (0.404) (0.404) (0.404) T max (0.04) (0.04) (0.04) T max (0.004) (0.004) (0.004).30 ± ± ± 0.0 K 0 (0.05 ± 0.004) (0.037 ± 0.004) (0.059 ± 0.004) Leader min (5.35) (5.35) (5.35) Trailer min (6.30) (6.30) (6.30) Reel Dimensions A max (7.8) (7.8) (7.8) N min (.97) (.97) (.97).4 +.0/ / /-0.0 W ( /-0.0) ( /-0.0) ( /-0.0) W max (0.74) (0.74) (0.74) T OVER TAPE D 0 P P 0 E DIMENSIONS: MM (INHES) W (MEASURED AT HUB) B F E W A N(HUB DIA.) B0 K 0 T A 0 P W (MEASURED AT HUB)

6 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns products manufactured by or on behalf of Bourns, Inc. and Unless otherwise expressly indicated in writing, Bourns products and data sheets relating thereto are subject to change and complete before placing orders for Bourns products. The characteristics and parameters of a Bourns product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns product with other components the actual performance of the Bourns product as meeting the requirements of a particular industry of Bourns products are responsible for ensuring compliance with safety-related requirements and standards applicable to Bourns on a case-by-case basis, use of any Bourns Bourns standard products that are suitable for use in aircraft standard the user s sole risk. custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns standard products shall also apply to such Bourns custom products. Users shall not sell, transfer, export or re-export any Bourns Bourns products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns products may not, without bilingual versions are available at: Web Page: PDF: