DSP Laboratory (EELE 4110) Lab#3 Discrete Time Signals

Size: px

Start display at page:

Download "DSP Laboratory (EELE 4110) Lab#3 Discrete Time Signals"

Timothy Freeman
5 years ago
Views:

1 Islamic University of Gaza Faculty of Engineering Electrical Engineering Department Spring- ENG.MOHAMMED ELASMER DSP Laboratory (EELE 4) Lab#3 Discrete Time Signals DISCRETE-TIME SIGNALS Signals are broadly classified into analog and discrete signals. An analog signal will be denoted by x(t), in which the variable t can represent any physical quantity, but we will assume that it represents time in seconds. A discrete signal will be denoted by x(n), in which the variable n is integer-valued and represents discrete instances in time. Therefore it is also called a discrete-time signal, which is a number sequence and will be denoted by one of the following notations: x n = x n = {, x, x, x, } where the up-arrow indicates the sample at n =. In MATLAB we can represent a finite-duration sequence by a row vector of appropriate values. However, such a vector does not have any representation of x(n) would require two vectors, one each for x and n. For example, a sequence: x n = {,,,,,4,3,7} Can be represented in MATLAB by: >> n=[-3,-,-,,,,3,4]; >> x=[,,-,,,4,3,7]; Generally, we will use the x-vector representation alone when the sample position information is not required or when such information is trivial (e.g. when the sequence begins at n=). An arbitrary infinite-duration sequence cannot be represented in MATLAB due to the finite memory limitations. TYPES OF SEQUENCES We use several elementary sequences in digital signal processing for analysis purposes. Their definitions and MATLAB representations are given below.. Unit sample sequence δ n = n = n

2 However, the logical relation n == is an elegant way of implementing δ(n). For example, to implement: δ n n o = n = n o n n o Over the interval n n n, we will use the following MATLAB function: % Function to generate x(n)=delta(n-no), n<=n<=n function [x,n]=impseq(no,n,n) n=[n:n]; x=[(n-no) == ]; end In other way: % n=,n=6,no=5 n=[:6] x=[(n-5) == ] stem(n,x) or: [x,n]=impseq(5,,6) Results: n = x = Figure 4. impseq(5,,6). Unit step sequence u n = n n < In MATLAB the function zeros(,n) generates a row vector of N zeros, which can be used to implement u(n) over a finite interval. However, the logical relation n == is an elegant way of implementing u(n). For example, to implement u n n o = n n o n < n o Over the interval n n n, we will use the following MATLAB function: % Function to generate x(n)=step(n-no), n<=n<=n function [x,n]=stepseq(no,n,n) n=[n:n]; x=[(n-no) >= ]; end

3 In other way: % n=,n=6,no=5 n=[:6] x=[(n-3) >= ] stem(n,x) or: [x,n]=stepseq(3,,6) Results: n = x = Real-valued exponential sequence: Figure 4. stepseq(3,,6) x n = a n, n; aεr In MATLAB an array operator. is required to implement a real exponential sequence. For example, to generate x(n) = (.9) n, n, we will need the following MATLAB script: >> n=[:]; >> x=(.9).^n; 4. Complex-valued exponential sequence: x n = e σ+j ω o n, n Where σ is called an attenuation and ω o is the frequency in radians. MATLAB function script is used to generate exponential sequences. For example, to generate x(n) = exp [( + j3) n], n, we will the following MATLAB script: >> n=[:]; >> x=exp(+3i).^n; 5. Sinusoidal sequence: x n = cos ω o n + θ, n Where θ is the phase in radians. A MATLAB function cos(or sin) used to generate sinusoidal sequences. For example, to generate x(n) =3cos(.lπn+π/3)+sin(.5πn), n, we will need the following MATLAB script: >> n=[:]; >> x=3*cos(.*pi*n+pi/3)+*sin(.5*pi*n);

4 6. Random sequences: Many practical sequences can't be described by mathematical expressions. Those sequences are called random (stochastic) sequences and are characterized by parameters of the associated probability density function or their statistical moments. In MATLAB there are two types of random sequences. The rand(,n) generates a length N random sequence whose elements are uniformly distributed between [,]. The randn(,n) generates a length N Guassian random sequence with mean and variance. 7. Periodic sequences: A sequence x(n) is periodic if x(n)=x(n+n), the smallest integer N satisfies the previous relation is called the fundamental period. OPERATIONS ON SEQUENCES. Signal addition: {x n } + {x n } = {x n + x n } It's implemented by MATLAB using the operator "+". Notice that the two sequences x (n) and x (n) must have the same length and the same indexing. We can use the following MATLAB function to demonstrate the discrete sequences additions: % Function adds two discrete time sequences y(n)=x(n)+x(n) function [y,n]=sigadd(x,n,x,n) n=min(min(n),min(n)):max(max(n),max(n)); y=zeros(,length(n)); y=y; y(find((n>=min(n))&(n<=max(n))==))=x; y(find((n>=min(n))&(n<=max(n))==))=x; y=y+y; end To understand the algorithm of the sigadd function, we will firstly describe find function. >> help find Find indices of nonzero elements. ind = FIND(X) returns the linear indices corresponding to the nonzero entries of the array X. for example: >> X = [ ]; >> indices = find(x) %% means find x that is not equal to zero indices = The indices,3,4,8 and 9 of a vector X has a non zero value.

5 Other example: >> X = [ ]; >> ind = find(x > ) %% X> = 4,8,6 which indices=3,8,9 ind = find(x>) returns linear indices corresponding to the entries of X that are greater than. The lines below can be used to add two sequences x(n) and x(n), x=[,,4,6,8]; % line# n=[,,,3,4]; % line# x=[,3,5,7,9]; % line#3 n=[-,-,,,]; % line#4 n=min(min(n),min(n)):max(max(n),max(n)); % line#5 y=zeros(,length(n)); % line#6 y=y; % line#7 y(find((n>=min(n))&(n<=max(n))==))=x; % line#8 y(find((n>=min(n))&(n<=max(n))==))=x; % line#9 y=y+y; % line# n = >> A=n>=min(n) % n>= {,,,,,,} >> B=n<=max(n) % n<=4 {,,,,,,} >> A&B >> find(a&b==) % index A = B = ans = ans = The values of all workspace variables can be seen in the following table, line# line# line#3 line#4 n x n x line#5 line#6 line#7 line#8 line#9 line# N y y y y y+y Or using sidadd function x=[,,4,6,8]; n=[,,,3,4]; x=[,3,5,7,9]; n=[-,-,,,]; [y,n]=sigadd(x,n,x,n) y = n =

6 . Signal multiplication: x n. {x n } = {x n x n } It's implemented in MATLAB by array operator ".*". Once again the similar restrictions apply for the ".*" operator as "+" We can use the following MATLAB function to demonstrate the discrete sequences multiplication: % Function multiplies two discrete time sequences y(n)=x(n)*x(n) function [y,n]=sigmult(x,n,x,n) n=(min(n),min(n)):(max(n),max(n)); y=zeros(,length(n)); y=y; y=find((n>=min(n))&(n<=max(n==))=x; y=find((n>=min(n))&(n<=max(n==))=x; y=y.*y; end 3. Signal scaling: In this operation each sample is multiplied by a scalar α. a x n = {ax n } The operator "*" is used to implement scaling in MATLAB. 4. Signal shifting: In this operation each sample is shifted by amount of k to obtain the shifted sequence y(n): y n = x n k This is can be implemented by the following MATLAB function: % Function does signal shifting y(n)=x(n-no) function [y,n]=sigshift(x,n,no) n=n+no; y=x; end For example: x=[,,,]; n=[,,3,4]; n=n+6; n3=n-6; %[y,n]=sigshift(x,n,6) %[y,n3]=sigshift(x,n,-6) stem(n,x),hold on,stem(n,x),hold on,stem(n3,x)

7 Signal folding: Figure 4.3 sigshift(x,n,no) In this operation each sample of x(n) is flipped around n= to obtain a folded sequence y(n): y n = x n In MATLAB this operation is implemented as follows: % Function does signal folding y(n)=x(-n) function [y,n]=sigfold(x,n) y=fliplr(x); n=-fliplr(n); end >> help fliplr FLIPLR Flip matrix in left/right direction. FLIPLR(X) returns X with row preserved and columns flipped in the left/right direction. X = 3 becomes 3 For example: x=[,,3]; n=[,3,4]; y=fliplr(x); n=-fliplr(n); % [y,n]=sigfold(x,n) stem(n,x),hold on,stem(n,y) Figure 4.4 sigfold(x,n)

8 6. Sample summation: This operation adds all sample values of x(n) between n and n. n n =n x n = x n + + x n And it's implemented by MATLAB by: >> sum(x(n:n)); 7. Sample product: This operation multiplies all sample values of x(n) between n and n. n o n x n n And it's implemented by MATLAB by: >> prod(x(n:n)); 8. Signal energy: The energy of a sequence x(n) is given by: E x = x n n= The energy of a finite duration x(n) can be computed in MATLAB using: >> E=sum(abs(x).^); 9. Sample power: The average power of a periodic sequence with fundamental period N is given by: P x = N N n = x n

9 Exercise Generate and plot each of the following sequences over the indicated intervals: a) x (n) = δ(n + ) δ(n 4), 5 n 5 b) x (n) = n[u(n) u(n )] + exp(.3(n )) [u(n ) u(n )], n c) x 3 (n)(n) = cos(.4πn) +.w(n), n 5, where w(n) is a Guassian random sequence with and variance. d) x (n)(n) = exp(. + j.3)n, n DISCRETE SYSTEMS Mathematically, a discrete time system is described as an operator T[.] that takes a sequence x(n) (called excitation) and transforms it into another sequence y(n) (called response). y n = T x n Discrete systems are classified into linear and non-linear systems. We will deal mostly on linear systems. Linear systems: A discrete time system is called linear system if it satisfies the superposition principle. L a x n + a x n = a L x n + a L x n, a, a, x n, x n Linear time-invariant (LTI) systems: A linear system in which an input-output pair, x(n) and y(n), is invariant to a shift n in time is called a linear-time invariant system. For LTI system the L[.] and the shifting operators are available as shown below. The impulse response of an LTI system is given by h(n). And it's represented mathematically by the linear convolution sum:

10 We will now explore some of the LTI system properties.. Stability: This is a very important concept in linear system theory. The primary reason for considering stability is to void building harmful systems and to avoid burnout or saturation in systems operation. A system is said to be bounded-input bounded output stable if every input produced bounded output. x n < y n <, x, y An LTI system is BIBO if and only if its impulse response is absolutely summable. BIBO Stability n= h n < For example: for the system y n =.9 n u n n=:; y=(-.9).^n; sum(y) ans =.563, then the system is stable.. Casuality This important concept is necessary to make sure that systems can be built. A system is said to be casual if the output at index no depends only on the input up to and including the index no; that is the output doesn't depend on the future values An LTI system is casual if and only if its impulse response: CONVOLUTION In DSP, the convolution is an important operation as it has many uses. It can be evaluated in many ways. MATLAB provides a built-in function called conv that computes the convolution between two finite duration sequences. The conv function assumes that the two sequences begin at n=. Example: Given the following two sequences x n = 3,, 7,,, 4,, 3 n 3 h n =, 3,, 5,,, n 4 Determine the convolution y(n)=x(n)*h(n). >> x=[3,,7,,-,4,]; >> h=[,3,,-5,,]; >> conv(x,h) ans =

11 Note that the conv function doesn't provide any timing information if the sequences have arbitrary support. A simple extension of the conv function called conv_m, which perform the convolution of arbitrary support sequences. % Modified convolution routine function [y,ny]=conv_m(x,nx,h,nh) nyb=nx()+nh(); nye=nx(length(x))+nh(length(h)); ny=[nyb:nye]; y=conv(x,h) end Perform the convolution in previous example using conv_m function. x=[3 7-4 ]; nx=[-3,-,-,,,,3]; h=[ 3-5 ]; nh=[-,,,,3,4]; [y,ny]=conv_m(x,nx,h,nh) y = ny = Example: Consider a LTI system with input x n =, 9 n, else and the impulse response h n = n u n. Using conv_m find the output y(n). nx=-9:; x=[,,,,,,,,,]; nh=:; h=().^-nh; [y,ny]=conv_m(x,nx,h,nh) stem(ny,y) y(n)=x(n)*h(n) Figure 4.5 conv_m (system response)

12 Exercise Consider that we have an input x(n) of finite duration sequence: x n = u n u(n ) While the impulse response of infinite duration: h n =.9 n u(n) Compute the convolution y(n)=x(n)*h(n). CORRELATION The cross-correlation between two sequences can be evaluated by the formula: With the auto-correlation in the form: r xy r ( ) x ( n) y ( n ),,,,... n r ( ) x ( n)* y ( n) ( ) r ( ) In MATLAB, cross-correlation between two sequences x(n) and y(n) is implemented using xcorr(x,y) function and the auto-correlation of a sequence x(n) is computed. using xcorr(x). Example: Let x n =,, 4, and h(n) = {,,, } xx >> x=[,,4]; >> h=[,,,,]; >> y=xcorr(x,h) y = Also we can used convolution (conv_m function ) x=[,,4] nx=[,,] h=[,,,,] nh=[-4,-3,-,-,] [y,ny]=conv_m(x,nx,h,nh) y = ny = xy r xy yx ( ) x ( n) x ( n ),,,,... n r ( ) x ( n)* x ( n) xx E r () x ( n) x xx n

13 Exercise 3 Let, x n = 3,, 7,,, 4,, 3 n 3, and y(n) be its noise corrupted- and-shifted version: y n = x n + w(n) Where w(n) is a Guassian random sequence with mean and variance. Compute the cross-correlation between y(n) and x(n). DIFFERENCE EQUATIONS An LTI discrete system can also be described by a linear constant coefficients difference equation of the form: N k= M a k y n k = b m x n m, n m= Another form of the previous equation is: M y n = b m x n m m = N k= a k y n k A routine called filter is available in MATLAB to solve the difference equation numerically, given the input and the difference equation coefficients. This routine is invoked as follows: >> y=filter(b,a,x) Where b=[b b b...bm], a=[a a a...a M] are the coefficient arrays of the difference equation and x is the input sequence. The output y has the same length as x and insures that a. A useful use of filter function is that it can be used to find the numerical evaluation of the convolution of two sequences if one of them has infinite length. That's because we can't use conv function when one or both sequences of the convolution are of infinite length. Example: Suppose we have two systems with the following difference equations y(n) = x(n) + x(n ) + x(n ) Assume that y( ) =. (a) Find the impulse responses of these systems. (b) State whether each system is FIR or IIR, and why. (c) State whether each system is stable, and show why. b=[ ]; a=[]; [x,n]=impseq(,-,); h=filter(b,a,x); stem(n,h)

14 Figure 4.6 System impulse response From impulse response we can see that the system is FIR (and all FIR systems are stable). or if the sequence is summable sequence then the system is stable n = h n = + + = 4 < stable system Exercise 4 Given the following difference equations: y(n) =.9y(n ) + x(n). y n y n +.9y n = x(n). a. Calculate and plot the impulse response h(n) at x =, b. Calculate and plot the unit step response s(n) at x =, c. State whether each system is stable, and show why. d. State whether each system is FIR or IIR, and why.

LAB # 3 HANDOUT. y(n)=t[x(n)] Discrete systems have different classifications based on the input and output relation:

LAB # 3 HANDOUT. y(n)=t[x(n)] Discrete systems have different classifications based on the input and output relation: LAB # HANDOUT. DISCRETE SYSTEMS Mathematically, a discrete-time system (or discrete system for short ) is described as an operator T[.] that takes a sequence x(n) and transforms it into another sequence