Calio-Therm NC Type Series Booklet

Transcription

1 High-efficiency Drinking Water Pump Type Series Booklet

2 Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed for any other purpose, nor otherwise transmitted, published or made available to a third party without the manufacturer's express written consent. Subject to technical modification without prior notice. KSB Aktiengesellschaft, Frankenthal 19/12/216

3 Contents Contents Building Services: Heating Main applications... 4 Fluids handled... 4 Operating data... 4 Designation... 4 Design details... 4 Materials... 5 Product benefits... 5 Certifications... 5 Selection information... 6 Overview of product features / selection tables... 7 Technical data... 7 Selection chart... 7 Characteristic curves... 8 Dimensions... 1 Installation information... 1 Scope of supply... 1 Accessories

4 Building Services: Heating Designation Beispiel: Designation key Code Description Calio Type series Therm Drinking water pump NC Fixed speed 25 Nominal diameter of pump nozzle 2 G 1/4 25 G 1 1/2 4 Head in m x 1 (example: 4 = 4 m) 13 Overall mm Design details Design Maintenance-free wet rotor pump (glandless) Drive Electric motor Integrated motor protection Main applications Drinking water supply Hot-water supply Similar systems in industry and building services applications (e.g. cooling water circulation) Fluids handled Drinking water and water for the food and beverage industry, as per German TrinkwV 21 drinking water regulations Operating data Operating properties Characteristic Value Flow rate Q [m 3 /h] 9 Q [l/s] 2,5 Head H [m] 7 Fluid temperature Heating T [ C] +2 to +11 water Fluid temperature Drinking water 1) T [ C] Up to +65 and up to 14 [ dh] (hardness) Ambient temperature T [ C] to 4 Operating pressure p [bar] 1 Pressure class PN [bar] 1 Sound pressure level [db (A)] < 45 Connection G 1 1/4, G 1 1/2 1~23 VAC, 5 Hz IP44 enclosure Thermal class F Temperature class TF 11 Interference emissions EN Interference immunity EN Bearings Product-lubricated special plain bearing Connections Screw-ended or flanged Operating modes 3 adjustable speed levels Automatic functions Soft start Full motor protection Manual functions Setting the speed level Vent plug Deblocking function 1) We recommend using fluids with temperatures no higher than 65 C to prevent possible consequences caused by lime sedimentation; higher fluid temperatures are permissible for short periods (e.g. for thermal disinfection cycles). 4

5 Materials Overview of available materials Component Material Volute casing Stainless steel Shaft Ceramics Impeller Plastic with glass fibre content (PSU-GF2) (PP-GF3 for 25-7) Bearing Ceramics Can Stainless steel Thermal insulation Polypropylene shells Product benefits Saving energy by matching output to individual system requirements Easy replacement All wetted parts are in compliance with KTW recommendations (use of elastomers in drinking water applications). Universal use reduces storage costs. Certifications Overview Label Effective in: Comment Germany All sizes 5

6 Selection information Minimum pressure The minimum pressure p min at the pump suction nozzle serves to avoid cavitation noises at an ambient temperature of +4 C and the indicated fluid temperature T max. The indicated values are applicable up to 3 m above sea level. For installation at altitudes > 3 m, an allowance of.1 bar / 1 m must be added. To prevent condensation, the ambient temperature must always be lower than the temperature of the fluid handled. Minimum pressure p min [bar] specified for the fluid temperature [ C] Size Fluid temperature Minimum pressure Screw-ended pumps Flanged pumps [ C] [bar] [bar] All Up to 8,5,5 81 to 95,3 1,5 96 to 11 1,1 2,5 Fluid temperature [ C] specified for the ambient temperature [ C] Size Fluid temperature Ambient temperature [ C] [ C] All Description of the characteristic curve H 1 1~23 VAC a) b) 1 P Q Fig. 1: Selection example The characteristic curve can be adjusted between a) and b) by turning the press&turn dial. Level = open-loop control, minimum speed (corresponds to a setting of %) 1 Level 1 = open-loop control, maximum speed (corresponds to a setting of 1 %) 6

7 Overview of product features / selection tables Features and functions Features and functions Functions/features Automatic functions Soft start Technical data selection table Size Connection PN n P 1 I N Mat. No. [kg] [bar] Min. Max. [W] 1~23 VAC, 5 Hz Piping Pump Signalling contacts [min ¹] [min ¹] [A] 2-15 R 3/4 G 1 1/ ,11 -, ,7 2-3 R 3/4 G 1 1/ ,12 -, , R 1 G 1 1/ ,14 -, , R 1 G 1 1/ ,14 -, , R 1 G 1 1/ ,3 -, , R 1 G 1 1/ ,3-1, ,5 Selection chart 1 US.gpm IM.gpm H [m] H [ft] Q [m³/h] Q [l/s]

8 Characteristic curves Q [US.gpm] Q [IM.gpm] ~23 VAC R 3/ Q [US.gpm] Q [IM.gpm] 1 1~23 VAC R H [ft] 2 H [ft] H [m].5 2 H [m] Q [m³/h] Q [l/s] Q [m³/h] Q [l/s] P [kw] P [hp].2.4 P [kw] P [hp] Q [m³/h] / 2-3 Q [US.gpm] Q [IM.gpm] ~23 VAC R 3/ Q [m³/h] / Q [US.gpm] Q [IM.gpm] ~23 VAC R H [m] H [ft] H [ft] H [m] Q [m³/h] Q [l/s] Q [m³/h] Q [l/s] P [kw] P [hp].8 P [kw] P [hp] Q [m³/h] /. 1 Q [m³/h] /. 8

9 Q [US.gpm] Q [IM.gpm] ~23 VAC R H [ft] H [m] Q [m³/h] Q [l/s] P [kw] P [hp] Q [m³/h] / 9

10 Building Services: Heating Dimensions L1 G L3 L2 L4 Fig. 2: Dimensions 2-15 to 25-6 L1 G L3 L4 L2 Fig. 3: Dimensions 25-7 Dimensions [mm] Size R 3/4 3/ Installation information G 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 DN - L L ,5 L L Scope of supply Pump Calio-Therm Sealing elements Permissible installation positions Installation/operating manual Sizes All Insulation shells (for overall length 18 mm only) 1

11 Accessories Pipe unions Description Mat. No. [kg] 2 pump pipe unions ,2 with G 1 1/2 union nut and union end with Rp 3/4 internal thread, steel For pumps with G 1 1/2 external thread / R 3/4 pipe connection 2 pump pipe unions with G 1 1/2 union nut and union end with Rp 1 internal thread, steel For pumps with G 1 1/2 external thread / R 1 pipe connection ,2 11

12 /1-EN 19/12/216 KSB Aktiengesellschaft Johann-Klein-Straße Frankenthal (Germany) Tel