Interoperability/ Conformance Test dpmr Mode 1

Size: px

Start display at page:

Download "Interoperability/ Conformance Test dpmr Mode 1"

Moris Harrison
5 years ago
Views:

2 0 Revisin Histry Versin Date Change By 0v1 21 Nv 2011 First draft derived fr ISF/CSF 0v4 DL 0v2 10 Dec 2011 references t ISF/CSF reved DL 0v3 03 Jan 2012 editrials DL 1v0 24 Jan 2012 Apprved by TWG DL 1v1 9 Oct 2012 Sectin 6 revised t reference dpmr RF Tests Editrials fr JD and PH ipleented: Dcuent uses IDs 254 and 255 which have specific functin in TS but nt in TS DL 1v2 12 Oct 2012 Sectin 4 revised fr # key initiatr Sectin revised fr LBT PH HY 0 Revisin Histry Scpe Abbreviatins: Reference Unit Multi-band Equipent Test Prfile Mde 1 Vice Initial Cnditins: Receive Tests: ID Call: Grup Call: ID Late-Entry: Grup Late-Entry: Status Messages: Slw User data Invalid Vcder Selectin Transit Tests: ID Call: Off-Air Call Set-up Grup Call: Status Message: Slw User Data Listen Befre Transit Test Prfile Mde 1 Data Type 1 Receive Tests: ID Call: Grup Call: Type 2 Receive Tests ID Call: Grup Call: Type 1 Transit Tests: ID Call: Grup Call: Type 2 Transit Tests: ID Call:

3 3.4.2 Grup Call: Mde 1 Standard User Interface ID Addressing Grup Addressing All-Call addressing Invalid Address Nubers Call Mdifiers Packet Data RF Testing Appendix 1 Test Data Data Cntent Appendix 2 Canned Status Message Text

4 1 Scpe The purpse f this dcuent is t prvide the suary f Interperability Tests fr dpmr Mde 1 (peer t peer) peratin. Test ites have been extracted fr the functins defined in ETSI TS and TS Prfiles are supprted fr each de: Vice peratin Data peratin Vice + Data peratin Packet Data In each prfile a nuber f ptinal features are supprted, which, if ipleented, ust cnfr t this dcuent. REF EUT TPI ISF CSF c 1.1 Abbreviatins: Reference Unit Equipent under test Talking Party Identificatin Initial Services Functinality Cnfigured Services Functinality ptinal andatry cnditinal 1.2 Reference Unit The current reference unit fr tests (REF 1) is the Ic IC F4162DT (prtable). Fr ites/features nt supprted by this unit, the CML dpmr test syste ay be used. This shuld be nted in the test reprt. Fr these tests all cunicatins between terinals shuld be direct (n repeater r trunking cntrller present). f1 f1 f1 f1 REF 1 EUT1 EUT2 EUT3 Unit ID = Unit ID = Unit ID = Unit ID =

5 1.3 Multi-band Equipent Where a prduct is supplied in ultiple RF bands all using the sae prtcl and cntrl sftware, it is nly necessary t perfr the full cnfrance test n ne band. The ther bands shall be verified by executing the fllwing sub set n each variant: Mde 1: ID Call: Grup Late Entry: ID Call: RF tests as per dpmr RF Tests.dc 5

6 2 Test Prfile Mde 1 Vice Units shuld be prgraed with bth an Individual ID and Talk Grup ID 2.1 Initial Cnditins: Assues all units are n the RF channel 1. REF 1: ID TG EUT 1: ID TG EUT 2: ID TG EUT 3: ID TG Display f TPI is ptinal Slw User Data supprt is ptinal 2.2 Receive Tests: ID Call: Turn all EUT s n. On REF 1, select ID Press PTT n REF 1 EUT 2 shuld reain silent EUT 3 shuld reain silent Grup Call: On REF 1, select ID Press PTT n REF 1 EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI= ID Late-Entry: On REF 1, select ID Switch ff EUT 2 and EUT 3 Press PTT n REF 1 and hld EUT 2 shuld reain silent EUT 3 shuld reain silent Turn ff EUT 1, wait 2s, Turn n EUT 1 Other ethds f interrupting the RF signal are acceptable 6

7 EUT 2 shuld reain silent EUT 3 shuld reain silent Grup Late-Entry: On REF 1, select ID Switch ff EUT 2 and EUT 3 Press PTT n REF 1 and hld EUT 2 shuld reain silent This radi is OFF EUT 3 shuld reain silent This radi is OFF Turn n EUT 2 and EUT 3 EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI= Status Messages: On REF 1: select ID , Select Status sg1 ID Status essage Send status sg EUT 1 shuld display Status sg1 c indicate TPI= EUT 2 shuld reain silent EUT 3 shuld reain silent On REF 1, select ID , Select Status sg1 Grup Status essage Send status sg EUT 1 shuld display Status sg1 c indicate TPI= EUT 2 shuld display Status sg1 c indicate TPI= EUT 3 shuld display Status sg1 c indicate TPI= Slw User data Nte: REF 1 des nt supprt this de This is a cnditinal feature Enable Slw Data n REF 1 On REF 1, select ID Press PTT n REF 1 Slw data available c EUT 2 shuld reain silent ID Call 7

8 EUT 3 shuld reain silent Enable Slw Data n REF 1 On REF 1, select ID Press PTT n REF 1 Slw data available c EUT 2 shuld indicate TPI= Slw data available c EUT 3 shuld indicate TPI= Slw data available c Grup Call Invalid Vcder Selectin Nte: REF 1 des nt supprt this de On REF 1, select a Vcder de that is NOT supprted by EUT On REF 1, select ID Press PTT n REF 1 reain silent Indicate n vice 2.3 Transit Tests: REF 1: ID EUT 1: ID EUT 2: ID EUT 3: ID Transit Tie ut tier = 180s ID Call: Turn all EUT s n. On EUT 1 select ID Press PTT n EUT 1 REF 1 shuld indicate TPI= EUT 1 shuld Indicate call set up k If OACSU is supprted EUT 2 shuld reain silent EUT 3 shuld reain silent Keep PTT pressed fr > Tieut Ties Units ust be prgraed apprpriately EUT 1 shuld cease transissin REF 1 shuld bece silent 8

9 2.3.2 Off-Air Call Set-up Turn EUT 1 n, all thers ff. On EUT 1 select ID Press PTT n EUT 1 EUT 1 shuld Indicate call failed Grup Call: On EUT 1, select ID Press PTT n EUT 1 REF 1 shuld indicate TPI= EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI= Status Message: On EUT 1 select ID Select Status sg1 n EUT 1 Send status sg REF 1 shuld display Status sg1 c indicate TPI= EUT 2 shuld reain silent EUT 3 shuld reain silent On EUT 1, select ID Select Status sg1 n EUT 1 Send status sg REF 1 shuld display Status sg1 c indicate TPI= EUT 2 shuld display Status sg1 c indicate TPI= EUT 3 shuld display Status sg1 c indicate TPI= ID call Grup call Slw User Data Nte: REF 1 des nt supprt this de This is a cnditinal feature Enable Slw Data n EUT 1 On EUT 1 select ID , Press PTT n EUT 1 REF 1 shuld indicate TPI= Slw data available c EUT 2 shuld reain silent EUT 3 shuld reain silent ID Call 9

10 Enable Slw Data n EUT 1 On EUT 1 select ID Press PTT n EUT 1 REF 1 shuld indicate TPI= Slw data available c EUT 2 shuld indicate TPI= Slw data available c EUT 3 shuld indicate TPI= Slw data available c Grup Call Listen Befre Transit On EUT 1, select ID On EUT 2, select ID Assues plite t wn CC de Press PTT n EUT 2 REF 1 shuld reain silent Press PTT n EUT 1 EUT 1 shuld Nt transit EUT 1 is inhibited by LBT s On EUT 2, select a different CC Press PTT n EUT 2 REF 1 shuld reain silent Press PTT n EUT 1 EUT 1 shuld transit REF 1 shuld s Assues plite t wn CC de 10

11 3 Test Prfile Mde 1 Data 3.1 Type 1 Receive Tests: REF 1: ID TG EUT 1: ID TG EUT 2: ID TG EUT 3: ID TG Data Cntent f call is specified in Appendix 1. Data ay be prvided and/r delivered t an externally cnnected device r generated/displayed n the EUT as apprpriate. Data cntent ay be ne r re f the fllwing, (the frat used fr testing shuld be recrded); Status essage Pre cded essage Free text essage Shrt file transfer IP data transfer ID Call: Turn all EUT s n. Enable Type 1 Data Call n REF 1 and EUT s On REF 1, select ID Send Data Call fr REF 1 EUT 2 shuld reain silent EUT 3 shuld reain silent Grup Call: On REF 1, select ID Send Data Call fr REF 1 EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI= Type 2 Receive Tests REF 1: ID TG EUT 1: ID TG EUT 2: ID TG EUT 3: ID TG ID Call: Turn all EUT s n. Enable Type 2 Data Call n REF 1 and EUT s On REF 1, select ID Send Data Call fr REF 1 EUT 2 shuld reain silent 11

12 EUT 3 shuld reain silent Grup Call: On REF 1, select ID Send Data Call fr REF 1 EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI= Type 1 Transit Tests: REF 1: ID TG EUT 1: ID TG EUT 2: ID TG EUT 3: ID TG Data Cntent f call is specified in Appendix 1. Data ay be prvided and/r delivered t an externally cnnected device r generated/displayed n the EUT as apprpriate. Data cntent ay be ne r re f the fllwing, (the frat used fr testing shuld be recrded); Status essage Pre cded essage Free text essage Shrt file transfer IP data transfer ID Call: Turn all EUT s n. Enable Type 1 Data Call n REF 1 and EUT s On EUT 1, select ID Send Data Call fr EUT 1 REF 1 shuld indicate TPI= EUT 2 shuld reain silent EUT 3 shuld reain silent Grup Call: On EUT 1, select ID Send Data Call fr EUT 1 REF 1 shuld indicate TPI= EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI= Type 2 Transit Tests: REF 1: ID TG EUT 1: ID TG EUT 2: ID TG EUT 3: ID TG

13 Data Cntent f call is specified in Appendix 1. Data ay be prvided and/r delivered t an externally cnnected device r generated/displayed n the EUT as apprpriate. Data cntent ay be ne r re f the fllwing, (the frat used fr testing shuld be recrded); Status essage Pre cded essage Free text essage Shrt file transfer IP data transfer ID Call: Turn all EUT s n. Enable Type 2 Data Call n REF 1 and EUT s On EUT 1, select ID Send Data Call fr EUT 1 REF 1 shuld indicate TPI= EUT 2 shuld reain silent EUT 3 shuld reain silent Grup Call: On EUT 1, select ID Send Data Call fr EUT 1 REF 1 shuld indicate TPI= EUT 2 shuld indicate TPI= EUT 3 shuld indicate TPI=

14 4 Mde 1 Standard User Interface REF 1: ID TG EUT 1: ID TG EUT 2: ID TG EUT 3: ID TG If the Standard User Interface is supprted, the nubering and dialling schee shuld cnfr t the fllwing tests. 4.1 ID Addressing On EUT 1, press 1 # REF 1 shuld indicate TPI= Receive call EUT 2 shuld N actin EUT 3 shuld N actin On EUT 1, press 254 # REF 1 shuld N actin EUT 2 shuld indicate TPI= Receive call EUT 3 shuld N actin 4.2 Grup Addressing This feature uses the wildcard t define a grup f terinals 4.3 All-Call addressing This is a special case use f the wildcard addressing de. On EUT 1, press * *** *** # REF 1 shuld indicate TPI= Receive call EUT 2 shuld indicate TPI= Receive Call EUT 3 shuld indicate TPI= Receive Call On EUT 1, press 0 *** *** # REF 1 shuld indicate TPI= Receive Call EUT 2 shuld indicate TPI= Receive Call EUT 3 shuld indicate TPI= Receive Call On EUT 1, press 1 *** *** # REF 1 shuld N actin EUT 2 shuld N actin EUT 3 shuld N actin If OACSU is supprted If OACSU is supprted If OACSU is supprted 14

15 4.4 Invalid Address Nubers On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr On EUT 1, press # EUT 1 shuld Nt Tx, indicate errr If OACSU is supprted TBD 4.5 Call Mdifiers 15

16 5 Packet Data Packet data is als referred t as Type 3 Data in TS Test TBD. 16

17 6 RF Testing Equipent shall be tested t the relevant requireents f EN In additin, the tests defined in the dpmr Assc. dcuent dpmr RF Tests.dc shall be perfred. 17

18 7 Appendix 1 Test Data 7.1 Data Cntent Fr the data transfer tests, a cn data set shuld be used t enable autated testing: Status essage: dpmr MU test status essage Pre cded essage dpmr MU pre cded test essage Free text essage dpmr MU free text essage Shrt file transfer See attached file shrt data file IP data transfer TBA Fr the Slw User Data tests either a valid NMEA 183 data string (ie: GPS data) r the Status essage can be used. 18

19 8 Appendix 2 Canned Status Message Text The fllwing canned status sg text ay be used. If a nn English language text is used, the eaning shuld reain the sae as the English text: 1 t 16 user r anufacturer defined 17 t 29 t be defined 30 Call He 31 Urgent 32 Return t Base 19

Purchase Order Workflow Processing

Purchase Order Workflow Processing P a g e 1 Purchase Order Wrkflw Prcessing P a g e 2 Table f Cntents PO Wrkflw Prcessing...3 Create a Purchase Order...3 Submit a Purchase Order...4 Review/Apprve the PO...4 Prcess the PO...6 P a g e 3