2014 Illustrated price list BT 14

Transcription

1 2014 Illustrated price list BT 14 Great Britain Effective 1 January 2014 Schlüter - BEKOTEC-THERM

2 Schlüter - BEKOTEC-THERM The ceramic thermal comfort floor Energy-efficient, comfortable, reliable. Floor heating systems are the ideal medium for environmentally sound and economical heating thanks to their large-scale heat distribution across the entire space. Past experience has shown how difficult it is to achieve a satisfactory balance of the requirements placed on the entire assembly by the demands of construction, physics, and heating technology. Thus, conventional heated screeds with ceramic coverings often buckle or form cracks. This is mainly attributable to the fact that screed and ceramics show different expansions lengths due to their different heat expansion coefficients during temperature changes. The specifications of the corresponding building codes, for example with regard to screed thickness, movement joints, reinforcement inserts, or residual moisture until a substrate is fully cured have frequently proven inadequate for practical applications in the past. From the perspective of heating technology, a relatively large screed volume has the disadvantage that a large amount of heating energy has to be supplied and stored. Accordingly, conventional floor heating systems are slow to respond to temperature changes. The complete system Schlüter -BEKOTEC-THERM solves these problems comprehensively and is protected as an international process patent. The "BEKOTEC" component in the name represents the covering assembly technology, while THERM stands for the heating components. Schlüter -BEKOTEC-THERM is based on a thin floor assembly made of conventional cementitious or quick-set screeds, which are applied over the studded BECOTEC panels and reduce shearing tensions of the screed area in the studded pattern. If Schlüter -DITRA 25 or Schlüter -DITRA-DRAIN 4 are used, ceramic tiles or natural stone panels Certified with a gold medal of the LEED program (Leadership in Energy and Environmental Design): Administrative building in Montreal, equipped with the ceramic thermal comfort floor Schlüter - BEKOTEC-THERM. can be installed as soon as the screed is ready to bear weight. Our THERM component offers heating technology that precisely matches the BEKOTEC system, ranging from heating pipes to electronic controls. The relatively small screed volume and the closeness of the heating pipes to the surface allow for a quick response to temperature changes. The interconnected air channels of the uncoupling mat below the tiles result in even heat distribution. This makes Schlüter -BEKOTEC- THERM a quick-reacting "ceramic thermal comfort floor" that can be operated with great energy efficiency at very low supply temperatures. Of course, other materials can be installed over the BEKOTEC screed as well. Schlüter -BEKOTEC-THERM has been proven in domestic and international projects for years, whenever quick construction progress and ecologically sound heating are priorities. The LEED certification of our new administrative building in Montreal is an objective confirmation of the system's sustainability. 2

3 Schlüter - BEKOTEC-THERM Our service Technical consulting Determination of material requirements Calculation service Materials for tenders Technical consulting The experienced employees of our Technical Department will be pleased to assist you with any questions you may have concerning the construction assembly and the corresponding heating and control technology. The Department also develops individual construction designs and solutions for your building projects. Heating load calculation Our software solution allows us to determine the heating load of buildings and individual rooms on the basis of the corresponding drawings and data in order to guarantee the most efficient heat distribution of the Schlüter - BEKOTEC-THERM ceramic thermal comfort floor. Heating system design We can use existing drawings, information about the number and size of rooms, as well as the corresponding heating load to design the heating system. This includes the determination of the required heating circuits and the optimal installation spacing. The system generates a material list that includes all necessary components. Such lists can be supplied as tables or as CAD drawings with heating circuits. Materials for tenders We can develop customised materials for tender based on the technical design of Schlüter - BEKOTEC-THERM as a radiant panel heating system. Onsite consulting Please contact our offices if you need professional advice onsite. We will be pleased to arrange an appointment. Note: The cost of heating capacity calculation and heating system design will be waived if an order is placed. 3

4 Schlüter - BEKOTEC-THERM The Ceramic Thermal Comfort Floor System assembly This picture shows the assembly structure of the Schlüter - BEKOTEC-THERM ceramic thermal comfort floor with the associated system components. The numbers in the image represent the corresponding products of the system assembly. In addition, we can provide detailed technical data sheets for more comprehensive information. 5 c a 9 4 a b b a b

5 Schlüter - BEKOTEC-THERM System components of the modular radiant heated floor assembly: Schlüter - BEKOTEC-EN Studded screed panel for the attachment of Schlüter heating pipes. Additional insulation and construction standards must be observed in accordance with the applicable technical guidelines. Schlüter -BEKOTEC-BRS Screed edging strip. The edge strip BRS 808 KSF must be used with the studded screed panel EN 23 F and EN 18 FTS. The edge strip BRS 505 KSF must be used with EN 12 FK. Schlüter - BEKOTEC-THERM-HR Heating pipe Schlüter - BEKOTEC-THERM-HV Stainless steel heating circuit distributor manifolds with connection accessories a hot flow leg b cold return leg Schlüter - BEKOTEC-THERM-VS Distributing cabinet 6 Schlüter - BEKOTEC-THERM-E Electronic temperature control a interior thermostat b actuator c control module. System components for the installation of tile and natural stone (see separate price list) Table of contents Page Service... 3 All-round systems Renovation systems... 8 Overview of control technology Schlüter -BEKOTEC-EN 1 Studded screed panels Schlüter -BEKOTEC-BRS 2 Screed edging strip Schlüter -BEKOTEC-THERM-HR 3 Heating pipes Schlüter -BEKOTEC-THERM-HV 4 Heating circuit distributor manifolds with accessories Schlüter -BEKOTEC-THERM-RVT/BMS/RTB Fixed value control, return temperature limit valve, room temperature control valve Schlüter -BEKOTEC-THERM-VS 5 Distribution cabinets Schlüter -BEKOTEC-THERM-ER 6a Interior thermostats Schlüter -BEKOTEC-THERM-ESA 6b Actuators Schlüter -BEKOTEC-THERM-ESM 6c Control modules Schlüter -BEKOTEC-THERM-ZWK Heating unit Calculation help Other system components a Schlüter - DITRA 25 Uncoupling, heat distribution, bonded water proofing, vapour pressure equalisation b Schlüter - DITRA-DRAIN 4 Bonded uncoupling, heat distribution, vapour pressure equalisation 8 9 System components not available from Schlüter-Systems 10 Schlüter - DILEX-EK or -RF Maintenance free edge and movement joint profiles Schlüter - RONDEC, Schlüter - JOLLY or Schlüter - QUADEC Decorative finishing profiles for walls, skirting and floors Screed Cement or calcium sulfate screed mm Assembly with Schlüter - BEKOTEC-EN/P or Schlüter - BEKOTEC-EN/PF with 16 x 2 mm heating pipe mm Assembly with Schlüter - BEKOTEC-EN 23 F and 14 x 2 mm heating pipe 11 Thin-bed tile adhesive 12 Ceramic tiles or natural stone Other coverings such as carpet, laminates and parquet are also feasible in compliance with the applicable installation standards. Systems for renovation projects Schlüter - BEKOTEC-EN 18 FTS with integrated sound insulation is installed as a floating system directly on weight-bearing substrates with load distribution. Schlüter - BEKOTEC-EN 12 FK is directly adhered to weight-bearing substrates with load distribution Assembly with Schlüter - BEKOTEC-EN 18 FTS with heating pipe 12 x 1.5 mm 31 mm mm Assembly with Schlüter - BEKOTEC-EN 12 FK with heating pipe 10 x 1.3 mm 5

6 Schlüter - BEKOTEC-THERM All-round systems Schlüter - BEKOTEC-EN Schlüter - BEKOTEC-EN F Schlüter - BEKOTEC-THERM is a safe floor assembly with low construction height. In conjunction with the matching heating and control technology, the modular system results in an energy efficient and quick reacting radiant heated floor system with low water supply temperatures. The system is based on the studded screed panel, Schlüter - BEKOTEC-EN, which is directly installed on top of a load bearing substrate and/or conventional heat and sound insulation panels. The studs are spaced in such a way that the Schlüter heating pipes can be installed at regular intervals to suit the room requirements; the studs are spaced at intervals of 75 mm. Screed mortar CT-C25-F4 (ZE 20) or CA-C25-F4 (AE 20) (maximum flexural strength F5) covers the studs and the heating pipes by a minimum of 8 mm and maximum of 25 mm. This results in a screed thickness of at least 32 mm between the studs. The contraction that occurs when the screed cures is reduced within the pattern of the studs, so that no tension can build as a consequence of contraction buckling. It is therefore not necessary to divide the screed into separate fields with movement joints. Upright structural elements need to be secured with edging strips and construction joints will be carried over into the floor assembly. Once the screed is ready to support weight, the Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4 uncoupling mat is installed. Ceramic tiles or natural stone can be installed directly on top of this layer in thin-bed tile adhesive. Movement joints in the cover layer above Schlüter - DITRA should be established with Schlüter - DILEX in the usual spacing. Since the screed mass to be heated or cooled is comparatively small, the radiant heated floor is easily regulated and can be operated with low supply temperatures. The electronic Schlüter control components, which are also available in wireless versions and are coordinated with the system, also allow for the quick and accurate control of the Schlüter - BEKOTEC-THERM ceramic thermal comfort floor. The modular structure of the entire Schlüter control technology allows for simple installation and operation. A wide range of requirements is placed on heated floor constructions Heat and sound insulation Support and distribution of traffic loads Waterproofing in wet rooms Usable area and design element Function as large area heating element In addition to ceramic tile and natural stone, other coverings such as parquet, laminates and carpet can also be used, following the applicable installation standards. With Schlüter - BEKOTEC-THERM we have achieved a balance of the varied requirements placed on heated floors. The modular system allows for simple, effective and building wide coordination and installation. Schlüter - BEKOTEC-THERM The Ceramic Thermal Comfort Floor Simple. Safe. Fast. 6

7 Design benefits The Schlüter - BEKOTEC-THERM ceramic thermal comfort floor is an easily coordinated modular system that is economical and effective, with low construction height and short installation time for new buildings and refurbishment. It is suitable for private homes as well as commercial areas such as office buildings, salesrooms and car dealerships. Once Schlüter - BEKOTEC-THERM has been installed as the heating system, no other obstructive heating elements are required. This allows for maximum design freedom. Schlüter - BEKOTEC-THERM: construction benefits Advantage Low construction height Material and weight savings Screed construction with low tension No screed joints Explanation Schlüter - BEKOTEC-THERM can be installed with construction heights starting at 31 mm plus covering. This results in a wide range of application options for new construction and refurbishment. Due to the low screed mass, the weight of 1 m 2 of screed is only 57kg. Compared to conventional heated screeds, a reduction of 37 mm in screed thickness saves 3.7 m 3 of screed mortar with the weight of approximately 7.4 t over an area of 100 m 2. This has a positive impact on the static calculations of new construction or refurbishment projects. The building is also spared the corresponding amount of moisture. Shrinkage stresses in the screed are evenly reduced in the studded pattern of the Schlüter - BEKOTEC screed panel. The screed does not buckle due to internal tensions. No constructive reinforcement is necessary. The tensions in the screed are evenly reduced across the entire area. Therefore, it is not necessary to divide the screed into fields with movement joints. In addition to ceramic tiles and natural stone coverings, other coverings such as parquet, laminates, or carpet can be installed, offering a great variety of design choices. Note: When installing coverings other than ceramic tile or natural stone, the applicable building standards for the covering must be followed, e.g. residual moisture at final curing. More design options Short construction time Crack free ceramic or natural stone covering Highly durable Free choice of movement joints in the joint pattern of the ceramic covering over Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4, since the joints from the screed do not have to be carried over. Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4 can be installed as soon as the screed is ready to support weight, followed by the tile covering. For calcium sulfate screeds, the residual moisture should be approximately 2 %. No warm up or cure heating is required. No CM measurements to determine residual moisture. Less material, therefore quicker installation. The low tension screed construction and uncoupling properties of Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4 make sure stresses are not transferred to the covering. Loads in private and commercial buildings of up to 5kN/m 2 are no problem (additional insulation must be able to sustain the corresponding pressure). Proven suitability Damage free practical application. Numerous reference projects. Test certificates from independent institutes. Schlüter - BEKOTEC-THERM: heating benefits Advantage Quick reacting radiant heated floors Explanation The low screed mass allows for quick control response, e.g. when lowering the temperature at night. Even distribution of heat Low supply temperature, low heating cost The interconnected air channels of Schlüter - DITRA 25 or Schlüter - DITRA- DRAIN 4 below the ceramic covering allow for an even distribution of heat. The even, quick and large scale heat performance is highly efficient. Effective for the utilisation of renewable energy sources Easy to control Comfort level Sanitary and healthy Cooling The effective heating performance with low supply temperatures translates into a high degree of efficiency, e.g. for heating pumps or solar equipment. The optimised control technology allows for accurate temperature settings. Electronic (230 V, 24 V) or wireless control offer the right solution for all building situations. The mild radiation heat of the floor as a large scale heating element makes for maximum comfort. The heated, dry floor areas don t give insects such as mites a chance. The evenly radiated heat reduces the growth of mold and the germination of spores. Ceramic tile and natural stone coverings are especially easy to care for and are hygienic. With the corresponding application technology, rooms can be kept at a basic cool temperature. 7

8 Schlüter - BEKOTEC-THERM Restoration systems Schlüter - BEKOTEC-THERM is ideally suited for creating heated and unheated screed in renovation projects because of its thin-layered structure. The variations Schlüter - BEKOTEC-EN 18 FTS and Schlüter - BEKOTEC-EN 12 FK were specifically developed for such applications. The low assembly height and small screed volume result in minimal static loads. Schlüter - BEKOTEC-EN FTS Schlüter - BEKOTEC-EN 18 FTS is installed as a floating system on existing, weight-bearing substrates or old coverings if applicable. The sound insulation layer integrated below the studded screed panel can reach sound insulation values of up to 25 db. With a coverage of min 8 mm/ max. 20 mm over the studs, the assembly height is 31 to 43 mm. Schlüter - BEKOTEC-EN 12 FK is installed as a bonded assembly on existing, weightbearing substrates or old coverings if applicable. The 12 mm studs are covered with min. 8 mm / max. 15 mm of screed allowing for assembly heights of 20 to 27 mm. Schlüter - BEKOTEC-THERM is ideally suited for the construction of energy-efficient ceramic thermal comfort floors in conjunction with ceramic tile and natural stone and the Schlüter - DITRA 25 membrane. However, all other floor coverings that are suitable for use with floor heating are equally feasible. Schlüter - BEKOTEC-EN FK Schlüter - BEKOTEC-THERM The Ceramic Thermal Comfort Floor Simple. Safe. Fast. 8

9 Schlüter - BEKOTEC-EN 18 FTS Advantage Easy floating installation Integrated 25 db sound insulation Option to install over wooden floors Screed thicknesses from 26 mm (31 mm incl. 5 mm sound insulation) Heated or unheated Panels in convenient sizes Impact-resistant studded panel 50 mm installation grid for heating pipes Fully functional ceramic thermal comfort floor All benefits of the ceramic thermal comfort floor Installation with all floor coverings suitable for floor heating Low static load due to system weight from 52 kg/m² or 26 l/m² Suitable for cement-based and calcium sulfate screeds Complete accessory range Assembly with Schlüter -BEKOTEC-EN 18 FTS with heating pipe 12 x 1.5 mm Thin-layer ceramic thermal comfort floor with impact sound insulation on existing screed Assembly with Schlüter -BEKOTEC-EN 12 FK with heating pipe 10 x 1.3 mm Thin-layer ceramic thermal comfort floor on existing screed 18 5 Schlüter - BEKOTEC-EN 12 FK Advantage Renovation over existing screed/covering as an option Can be adhered to wooden floor structures Bonded screed assembly Screed thicknesses from 20 mm Heated or unheated Panels in convenient sizes Impact-resistant studded panel 50 mm installation grid for heating pipes Fully functional ceramic thermal comfort floor All benefits of the ceramic thermal comfort floor Installation with all floor coverings suitable for floor heating Connection to existing heating systems as an option Low static load due to system weight from 40 kg/m² or 20 l/m² Suitable for cement-based and calcium sulfate screeds Complete accessory range 9

10 Schlüter - BEKOTEC-THERM Control technology 1 ER Interior thermostat Control, Comfort, Standard & Comfort cooling/heating Schlüter control technology allows for the individual control of room temperature settings. The flexible modular system can be adapted to all construction designs and individual room temperature control. In conjunction with the high quality control options of the Schlüter - BEKOTEC-THERM ceramic thermal comfort floor, the home atmosphere is pleasant and complies with energy savings regulations at the same time. Controls are available in the versions 24 Volt with integrated transformer, 230 Volt, or wireless. The plug in and clamp connections for wiring and module connections are colour coded for easy installation. 4.3 Note Connection cable from the interior thermostat to the control module: NYM 5 x 1.5 mm ESME/R Expansion for interior thermostats ESME/KH Extension for Cooling/heating ESME/SA Expansion for actuators 2 ESM Control module 3 SA Actuators Basic installation Schlüter - BEKOTEC-THERM-ESM as the control module is the switch connection between the interior thermostat and the actuator. It can control up to six interior thermostats (= six rooms) with one to four actuators each. The total number of connected actuators including control module expansions has to be limited to a maximum of 14 (=14 heating circuits). For wireless operation the maximum is 13. Expansion options A great variety of expansion options are available for the control modules. Please refer to the individual product descriptions for more information. 10

11 Components of control technology: ESME/P Control module expansion for pump control ER interior thermostats Four different models are available: 4.5 ESME/T Control module expansion with timer/ digital clock Control, Comfort, Standard or Comfort cooling/heating The appealingly designed interior thermostats feature a dial for setting the room temperature in a range between 10 and 28 C. The high quality thermostats have integrated pulse width modulation that equalises variations in room temperature. ER/C interior thermostat Control The interior thermostat Control is equipped with a digital clock and can be used to program time controlled temperature settings of a room or as a pilot clock for several rooms (room group control). A variable temperature reduction of 2 to 6 C is integrated. ER/K interior thermostat Comfort The interior thermostat Comfort is equipped with a variable temperature reduction mechanism of 2 to 6 C. A selection switch can be set to ON, OFF, or AUTOMATIC; an LED indicates the selection. Automatic time control can be set through the interior thermostat Control acting as a pilot clock or through a digital clock at the control module. ER/S interior thermostat Standard The Standard interior thermostat is preset for a temperature reduction of 2 C. Automatic time control can be set through the interior thermostat Control acting as a pilot clock or through a digital clock at the control module. ER/KKH thermostat, for Comfort cooling/heating The Comfort cooling/heating thermostat can be reversed by the control module extension ESME/ KH and is therefore capable of regulating the room temperature for cooling/heating. The operating modes cooling ( Ice crystal symbol) and temperature reduction ( Moon symbol) are shown with separate LED indicators. The unit is equipped with a variable temperature reduction setting from 2 to 6ºC. The digital clock ESME/T can be installed in the control module for automatic timer control. 2 ESM-R6 control module The Schlüter control module is the switch connection between the interior thermostats and the actuators. Up to six interior thermostats with one to four actuators each can be connected. The total number of connected actuators is limited to a maximum of 14 (13 for wireless operation). Control module expansions can be plugged in. The control module is also available for an interior thermostat as ESM-R1. 3 ESA actuators The Schlüter actuators regulate the flow at the individual cold leg valves of the heating circuit distributor (each actuator controls one heating circuit). They are equipped with an optical function display and a valve adaptation control. They are easy to install by plugging in. 4.1 ESME/SA actuator expansion With the ESME/SA expansion, more than four heating circuits monitored by actuators can control one or two large rooms. The expansion allows for one to eight additional actuators for one room or one to four additional actuators for two rooms. The total number of connected actuators is limited to a maximum of 14 (13 for wireless operation). 4.2 ESME/R interior thermostat expansion With the expansion ESME/R, two additional interior thermostats with one to four actuators each can be added to control more than six rooms. The total number of connected actuators is limited to a maximum of ESME/KH extension for cooling/heating The ESME/KH extension can switch all ER/KKH thermostats that are connected to the control module (24 V) from cooling to heating and vice versa. The switching takes place by way of a potential free contact on the side of the heat or cold generator or manually by pushing the set button on the control module extension. The operating modes (cooling, heating, or automatic mode) are shown by LED indicators. 4.4 ESME/P expansion of pump control With the expansion ESME/P, the pump of the heating setup can be controlled energy efficiently by demand. The device also has a setting for delayed offset flow. The control module extension is also available as a dual pump module ESME/PD. 4.5 ESME/T timer/digital clock expansion The ESME/T expansion is a digital clock for the time control of two different heating zones with separate heat reduction phases. It is suitable for daily or weekly programming. 11

12 mm Schlüter - BEKOTEC-EN Schlüter - BEKOTEC-EN is a studded screed panel made of polystyrene, which is designed for the attachment of the Schlüter - BEKOTEC-THERM-HR heating pipes, with a diameter of 16 mm. The panels are grooved for optimal joining. The heating pipes are attached in the desired spacing between the cutback studs, which are arranged in a regular spacing pattern of 75 mm. Conventional screed CT-C25-F4 (ZE 20) or CA-C25-F4 (AE 20) (maximum flexural strength F5) is installed above the studs with a thickness of at least 8 mm and at most 25 mm. Schlüter - BEKOTEC-EN/P consists of polystyrene (EPS 033 DEO), white, without foil coating and is most suited for conventional cement screeds. Schlüter - BEKOTEC-EN/PF is made of polystyrene (EPS 033 DEO) with an orange sheet coating and is therefore especially suited for flowing screeds (e.g. gypsum screeds). Technical Data: Installation width: mm Approved heating pipe: BT HR 16 RT Material classification: B2 pursuant to DIN 4102 Heat conductor group: 033 (0.033 W/mK) U value: W/m 2 K Thermal resistivity: m 2 K/W Schlüter - BEKOTEC-EN/P studded screed panel without foil coating 75.5 x 106 cm = 0.8 m² / m 2 EN 2520 P Note: EN/ screed panel without foil, e.g. conventional cementitious screeds 1 panel (0.8 m 2 ) = smallest delivery unit Schlüter - BEKOTEC-EN/PF studded screed panel with foil coating 75.5 x 106 cm = 0.8 m² / m 2 EN 1520 PF Note: EN/PF = screed panel with sheet coating, suitable for flowing screeds, e.g. gypsum screeds 1 panel (0.8 m 2 ) = smallest delivery unit Note: The uncoupling mat must be adhered to the screed prior to the installation of ceramic tiles or natural stone on the screed. The mat can be installed as soon as the screed is ready to bear weight (gypsum screeds: < 2 % residual moisture). Please observe the instructions of our product data sheets 6.1 and 9.1. Schlüter - BEKOTEC-ENR Schlüter - BEKOTEC-ENR is an edge panel made of polystyrene (EPS 040 DEO) for optimising cuts of Schlüter - BEKOTEC studded panels EN/P and EN/PF, adding small areas or filling small spaces between walls and upright structural elements. Schlüter - BEKOTEC-ENR edge panel 30.5 x 45.5 cm = 0.14 m² / U. ENR 1520 P box packaging

13 Schlüter - BEKOTEC-EN F Schlüter - BEKOTEC-EN F is a studded screed panel made of high impact polystyrene, designed for the attachment of the 14 mm heating pipes Schlüter - BEKOTEC-THERM-HR. The Schlüter - BEKOTEC panels are connected by overlapping a row of studs and clicking the panels together. The cutback studs hold the heating pipes in a precise 75 mm pattern, depending on the required pipe spacing. The screed is professionally installed as conventional screed of quality CT-C25-F4 (ZE20) or CA-C25-F4 (AE 20) (maximum flexural strength F5), with a coverage of at least 8 mm and no more than 25 mm above the studs. Technical Data: Installation width: mm Approved heating pipe: BT HR 14 RT Material classification: B2 pursuant to DIN 4102 Useable area: 120 x 90 cm = 1.08 m² Schlüter - BEKOTEC-EN 23 F studded screed panel 120 x 90 cm = 1.08 m² / m 2 EN 23 F Note: The uncoupling mat must be adhered to the screed prior to the installation of ceramic tiles or natural stone on the screed. The mat can be installed as soon as the screed is ready to bear weight (gypsum screeds: < 2 % residual moisture). The edge strip BRS 808 KSF must be used with the studded screed panel EN 23 F and EN 18 FTS. Please observe the instructions of our product data sheets 6.1 and 9.2. Schlüter - BEKOTEC-ENFG The levelling panel Schlüter - BEKOTEC-ENFG is installed in the area of door openings and heating circuit distributors to simplify connections and to minimise cutting waste. It consists of polystyrene foil material and is adhered below the studded panels Schlüter - BEKOTEC-EN 23 F, using the double sided adhesive tape. Schlüter - BEKOTEC-ENFG levelling panel with double sided adhesive tape (6 m) x 97.5 cm = 1.24 m² / Set Set ENFG Schlüter - BEKOTEC-EN FTS Schlüter -BEKOTEC-EN FTS is a studded screed panel made of impact resistant polystyrene foil with additional 5 mm impact sound insulation on the underside. It is directly adhered on suitable, load bearing substrates. The cutback studs hold the heating pipes Schlüter - BEKOTEC-THERM-HR Ø 12 mm in a precise 50 mm pattern, depending on the required pipe spacing. The- Schlüter - BEKOTEC panels are connected by overlapping a row of studs and clicking the panels together. The screed is professionally installed as conventional screed of quality CT-C25-F4 (ZE 20) or CA-C25-F4 (AE 20) (flexural strength max. F5) with a coverage of at least 8 mm and no more than 20 mm above the studs. Technical data: Installation spacing: mm Approved heating pipe: BT HR 12 RT Building material class: B2 acc. to DIN 4102 Utility area: 140 x 80 cm = 1.12 m² Schlüter - BEKOTEC-EN 18 FTS studded screed panel with impact sound insulation 140 x 80 cm = 1.12 m² / m 2 EN 18 FTS Improvement in sound insulation: An evaluation in accordance with DIN EN determined an impact sound insulation improvement of up to 25 db for the studded panel EN 18 FTS. Note: The uncoupling mat Schlüter -DITRA 25 must be adhered over the screed prior to the installation of ceramic tiles or natural stone. The mat can be installed as soon as the screed is sufficiently ready to bear weight (calcium sulfate screeds 2% residual moisture). The edge strip BRS 808 KSF must be used with studded screed panels EN 18 FTS. Please observe the instructions of our product data sheets 6.1 and 9.4. box packaging New product 13

14 Schlüter - BEKOTEC-ENFGTS The levelling panel Schlüter -BEKOTEC-ENFGTS is used in door transitions and in front of heating circuit distributors to simplify the connection and reduce cutting waste. It consists of polystyrene foil material with additional 5 mm impact sound insulation on the underside and is adhered below the studded panel EN 18 FTS, using the supplied double sided adhesive tape. Schlüter - BEKOTEC-ENFGTS levelling panel for EN 18 FTS 140 x 80 cm = 1.12 m² / Set Set EN 18 FGTS Schlüter - BEKOTEC-EN FK Schlüter -BEKOTEC-EN FK is a studded screed panel made of impact resistant polystyrene foil with an anchoring fleece laminated on the underside. It is adhered as a bonded assembly on suitable weight-bearing substrates. The cutback studs hold the heating pipes Schlüter - BEKOTEC-THERM-HR Ø 10 mm in a precise 50 mm pattern, depending on the required pipe spacing. The Schlüter -BEKOTEC panels are connected by overlapping a row of studs and clicking the panels together. The screed is professionally installed as conventional screed of quality CT-C25-F4 (ZE 20) or CA-C25-F4 (AE 20) (flexural strength max. F5) with a coverage of at least 8 mm and no more than 15 mm above the studs. Technical data: Installation spacing: mm Approved heating pipe: BT HR 10 RT Building material class: B2 acc. to DIN 4102 Utility area: 110 x 70 cm = 0.77 m² Schlüter - BEKOTEC-EN 12 FK studded screed panel with anchoring fleece on the underside 110 x 70 cm = 0.77 m² / m 2 EN 12 FK Note: The uncoupling mat Schlüter -DITRA 25 must be adhered over the screed prior to the installation of ceramic tiles or natural stone. The mat can be installed as soon as the screed is sufficiently ready to bear weight (calcium sulfate screeds 2% residual moisture). The edge strip BRS 505 KSF must be used with studded screed panels EN 12 FK. Please observe the instructions of our product data sheets 6.1 and 9.5. Schlüter - BEKOTEC-ENFGK The levelling panel Schlüter - BEKOTEC-ENFGK is used in door transitions and in front of heating circuit distributors to simplify the connection and reduce cutting waste. It consists of polystyrene foil material and is adhered below the studded panel EN 12 FK, using the supplied double sided adhesive tape. Schlüter - BEKOTEC-ENFGK levelling panel for EN 12 FK 110 x 70 cm = 0.77 m² / Set Set EN 12 FGK Schlüter - BEKOTEC-ZDK Schlüter - BEKOTEC-ZDK66 is a double sided adhesive tape for adhering the studded panel to the substrate or the levelling panels. Schlüter - BEKOTEC-ZDK double sided adhesive tape Roll: 66 m, width: 30 mm, thickness: 1 mm / U. BTZDK New product box packaging

15 Schlüter - BEKOTEC-BTS Schlüter - BEKOTEC-BTS is a 5 mm thick insulation layer of closed cell polyethylene foam for installation below the studded screed panels Schlüter - BEKOTEC- EN/P and -EN/PF. The use of Schlüter - BEKOTEC-BTS results in a significant improvement of sound insulation. The material can be used if the required construction height is not sufficient for a thick insulation layer of polystyrene or mineral fibre. The maximum floor load must be limited to 2 kn/m 2. Schlüter - BEKOTEC-BTS PE impact sound insulation 5 mm x 1 m x 50 m (50 m²) / m 2 Roll BTS Note: 1 roll (50 m 2 ) = delivery unit Schlüter - BEKOTEC-BRS Schlüter - BEKOTEC-BRS is an edging strip of closed cell polyethylene foam with an integrated foil leg. The edging strip is installed along walls or fixed room components. The foil leg is installed beneath the Schlüter - BEKOTEC panels or the PE foil cover and is suitable for conventional cement screeds. The finishing strip Schlüter - BEKOTEC-BRSK is equipped with an additional adhesive strip for attachment to the wall. Schlüter - BEKOTEC-BRS edging strip (BRS 810) edging strip self adhesive (BRSK 810) 8 x 100 mm x 50 m / m Roll BRS BRSK Note: 1 roll (50 m) = delivery unit Schlüter - BEKOTEC-BRS/KF Schlüter - BEKOTEC-BRS/KF is an edge strip of closed cell polyethylene foam with an adhesive leg and an adhesive backing for wall attachment. When the Schlüter - BEKOTEC studded panel is laid on the PE adhesive, the resulting connection prevents flowing screeds from running underneath the assembly during installation. Schlüter - BEKOTEC-BRS/KF edging strip with adhesive leg 8 x 80 mm x 25 m / m Roll BRS 808 KF Note: 1 roll (25 m) = delivery unit Schlüter - BEKOTEC-BRS/KSF Schlüter - BEKOTEC-BRS/KSF is an edging strip of closed cell polyethylene foam with an integrated foil leg that features an adhesive strip on both sides for attachment. The edging strip is pressed toward the wall by the adhesion on the substrate and the pre tensioning of the integrated foil leg. When the studded panel Schlüter - BEKOTEC is laid on top of the adhesive strip, flowing screed can no longer flow underneath the panel. Schlüter - BEKOTEC-BRS/KSF edging strip for flowing screeds with integrated foil leg 8 x 80 mm x 25 m / m Roll BRS 808 KSF Note: 1 roll (25 m) = delivery unit The edge strip BRS 808 KSF must be used with the studded screed panel EN 23 F and EN 18 FTS. Schlüter - BEKOTEC-BRS/KSF edging strip for flowing screeds with integrated foil leg 5 x 50 mm x 25 m / m Roll BRS 505 KSF Note: 1 roll (25 m) = delivery unit The edge strip BRS 505 KSF must be used with studded screed panels EN 12 FK. box packaging 15

16 10 Schlüter - DILEX-DFP Schlüter - DILEX-DFP is a movement joint profile to be installed at door areas or used to divide screed areas. Schlüter - DILEX-DFP flexible movement joint DFP = H H = mm L = 1.00 m / m 60 DFP 6/ DFP 8/ DFP 10/ L = 2.50 m KV = 100 DFP 10/ Schlüter - BEKOTEC-ZRKL Schlüter - BEKOTEC-ZRKL is a pipe clamping strip for securing the pipes on the levelling panel. The clamping strips are self-adhesive to allow for permanent attachment. Schlüter - BEKOTEC-ZRKL pipe clamping strip for heating pipes Ø mm Length: 20 cm, number of pipe spaces: 4 per unit / U. BTZRKL Schlüter - BEKOTEC-ZRKL pipe clamping strip for heating pipes Ø mm Length: 80 cm, number of pipe spaces: 32 per unit / U. BTZRKL Schlüter - BEKOTEC-THERM-ZW Schlüter - BEKOTEC-THERM-ZW is an angle clip of synthetic material for defined 90 bends of the heating pipes Ø 10, 12, 14 or 16 mm in the distributor cabinet. The angle clip is easy to attach to the heating pipes from the side. Due to the relatively low thickness of the screed layer, the use of the clips is recommended. Schlüter - BEKOTEC-THERM-ZW angle clip Ø mm / U BTZW BTZW Note: 2 units required per heating circuit (hot and cold leg). Schlüter - BEKOTEC-THERM-RH Schlüter - BEKOTEC-THERM-RH 75 is an attachment clamp for the heating pipes, which can be anchored into the Schlüter - BEKOTEC studded panels across the studs. It is especially useful for forming 45 angles with 16 mm heating pipes in the studded panel. Schlüter - BEKOTEC-THERM-RH 17 is a plastic clip with barbs for anchoring 16 mm heating pipes into the Schlüter - BEKOTEC studded panels. Schlüter -BEKOTEC-THERM-RH pipe clamps for 16 mm heating pipes package = 100 units / Package Package BTZRH 75/ BTZRH 17/ Note: Heating pipe clips are suitable for use with the studded panels EN/P and EN/PF only. 16 New product box packaging

17 12 x 1.5 mm 10 x 1.3 mm Schlüter - BEKOTEC-THERM-HR Schlüter - BEKOTEC-THERM-HR is a heating pipe of high-quality PE-RT plastic. It is very flexible and allows for optimal installation in the Schlüter - BEKOTEC studded screed panel. Diameters 10, 12, 14 or 16 mm, manufactured according to DIN 16833, oxygen-impermeable according to DIN 4721/26, SKZ quality-control A220. Shipping unit: 70 m in carton 120 m in carton 200 m in carton 750 m on disposable drum 1000 m on disposable drum 1500 m on disposable drum Our systems have been tested according to DIN EN Schlüter - BEKOTEC-THERM-HR heating pipe 16 mm for EN/P and EN/PF L = m / m Roll 70 BTHR 16 RT BTHR 16 RT BTHR 16 RT BTHR 16 RT Schlüter - BEKOTEC-THERM-HR heating pipe 14 mm for EN 23 F L = m / m Roll 70 BTHR 14 RT BTHR 14 RT BTHR 14 RT BTHR 14 RT Schlüter - BEKOTEC-THERM-HR heating pipe 12 mm for EN 18 FTS L = m / m Roll 70 BTHR 12 RT BTHR 12 RT BTHR 12 RT BTHR 12 RT Schlüter - BEKOTEC-THERM-HR heating pipe 10 mm for EN 12 FK L = m / m Roll 70 BTHR 10 RT BTHR 10 RT BTHR 10 RT BTHR 10 RT Schlüter - BEKOTEC-THERM-HRA Schlüter - BEKOTEC-THERM-HRA is a dispensing unit that accommodates disposable drums with Schlüter heating pipe. It can be assembled without tools and is easily disassembled for transport. Made of a coated steel frame construction. Schlüter - BEKOTEC-THERM-HRA heating pipe dispenser / U. BTZHRA The unit consists of: - One 25 mm spindle - Two triangular frames - Two connecting brackets box packaging New product 17

18 A Schlüter - BEKOTEC-THERM-HV/DE Schlüter - BEKOTEC-THERM-HV/DE is a heating circuit distributor manifold DN 25 of stainless steel with hot leg and cold leg bars, outside diameter 35 mm. Two distributor manifold brackets with sound insulation inserts, matching the Schlüter distributor manifolds cabinet, as well as a wall mounting set are included loosely in the package for installation. The integrated and pre assembled set includes: - Hot leg flow meter with transparent scale, adjustable 0.5 to 5.0 l / minute for regulating flow quantities - Thermostat valves, adjustable manually for every heating circuit, matching the electronically controlled Schlüter actuators - Manual ventilation valve, nickel plated brass for hot and cold legs - Filling and evacuation valve, 1/2" (DN 15), turning, nickel plated brass - End plug 3/4" (DN 20), nickel plated brass - Distributor connection, with 1 flat gasket male fitting (DN 25) - Heating circuit terminals, spaced 55 mm apart, consisting of connector nozzle 3/4" (DN 20) AG with cone, matching the Schlüter clamp connections Schlüter - BEKOTEC-THERM-HV/DE Schlüter - BEKOTEC-THERM-HV/A Number of heating circuits Length A [mm] HV/DE = heating circuit distributor HV/A = distributor connection set Ø 16 mm HV/A = distributor connection set Ø 14 mm / Set / Set / Set Set BTHV 2 DE BTHV 2 A BTHV 2 A BTHV 3 DE BTHV 3 A BTHV 3 A BTHV 4 DE BTHV 4 A BTHV 4 A BTHV 5 DE BTHV 5 A BTHV 5 A BTHV 6 DE BTHV 6 A BTHV 6 A BTHV 7 DE BTHV 7 A BTHV 7 A BTHV 8 DE BTHV 8 A BTHV 8 A BTHV 9 DE BTHV 9 A BTHV 9 A BTHV 10 DE BTHV 10 A BTHV 10 A BTHV 11 DE BTHV 11 A BTHV 11 A BTHV 12 DE BTHV 12 A BTHV 12 A Connection set components Ø 16 x 2 mm Example: BTHV 5 A for 5 component heating circuit distributor Ø 14 x 2 mm Example: BTHV 7 A 14 for 7 component heating circuit distributor Ball valves R ¾ 2 units per distributor 2 units 2 units per distributor 2 units Clamp connections 2 units per heating circuit 10 units 2 units per heating circuit 14 units Angle clips 2 units per heating circuit 10 units 2 units per heating circuit 14 units Heating pipe clamp RH 17 2 units per heating circuit 10 units Heating pipe clamp RH 75 2 units per heating circuit 10 units Connection set of components for heating pipes with a diameter of 16 mm 18 box packaging

19 Schlüter - BEKOTEC-THERM-HV/A Accessory sets for connecting the heating circuits to the heating circuit distributor, for heating pipes with Ø 10, 12, 14 or 16 mm, including two ball valves for the main connection. Connection set of components for heating pipes with a diameter of 12 mm Schlüter - BEKOTEC-THERM-HV/DE Schlüter - BEKOTEC-THERM-HV/A Number of heating circuits Length A [mm] Connection set components HV/DE = heating circuit distributor Ø 12 x 1.5 mm HV/A = distributor connection set Ø 12 mm Example: BTHV 5 A 12 for 5 component heating circuit distributor Ø 10 x 1.3 mm HV/A = distributor connection set Ø 10 mm / Set / Set / Set Set BTHV 2 DE BTHV 2 A BTHV 2 A BTHV 3 DE BTHV 3 A BTHV 3 A BTHV 4 DE BTHV 4 A BTHV 4 A BTHV 5 DE BTHV 5 A BTHV 5 A BTHV 6 DE BTHV 6 A BTHV 6 A BTHV 7 DE BTHV 7 A BTHV 7 A BTHV 8 DE BTHV 8 A BTHV 8 A BTHV 9 DE BTHV 9 A BTHV 9 A BTHV 10 DE BTHV 10 A BTHV 10 A BTHV 11 DE BTHV 11 A BTHV 11 A BTHV 12 DE BTHV 12 A BTHV 12 A Example: BTHV 7 A 10 for 7 component heating circuit distributor Ball valves R ¾ 2 units per distributor 2 units 2 units per distributor 2 units Clamp connections 2 units per heating circuit 10 units 2 units per heating circuit 14 units Angle clips 2 units per heating circuit 10 units 2 units per heating circuit 14 units 100 mm 100 mm Schlüter - BEKOTEC-THERM-HVE Schlüter - BEKOTEC-THERM-HVE is a heating circuit distributor manifold expansion for the subsequent expansion of the Schlüter heating circuit distributor of stainless steel. The integrated and pre assembled set includes: - Hot leg flow meter with transparent scale, adjustable 0.5 to 5.0 l / minute for regulating flow quantities - Thermostat valve, adjustable manually for every heating circuit, matching the electronically controlled Schlüter actuators - Heating circuit terminal with connector nozzle 3/4" (DN 20) AG with cone, matching the Schlüter clamp connections. Schlüter - BEKOTEC-THERM-HVE heating circuit distributor expansion / Set Set BTHVE 1 DE Note: The connection to the Schlüter - BEKOTEC-THERM heating pipes requires a set of clamp connections BTZ 2 KV as well as two angle clips BTZW box packaging New product 19

20 Schlüter - BEKOTEC-THERM-KH Schlüter - BEKOTEC-THERM-KH is a ball valve made of nickel plated brass, with 1" outside threading on one side (DN 25) for flat gasket connection to Schlüter heating circuit distributors and a connection pipe with 3/4" (DN 20) or 1" (DN 25) inside threading (shipping unit = set of two units for hot leg and cold leg). Schlüter - BEKOTEC-THERM-KH ball valve, 2 units/set Ø set = 2 units / Set Set 3/4" (DN 20) BTZ2KH " (DN 25) BTZ2KH Schlüter - BEKOTEC-THERM-KV Schlüter - BEKOTEC-THERM-KV is a 3/4" (DN 20) clamp connection made of nickel plated brass for connection of Schlüter heating pipes, diameter 10, 12, 14 or 16 mm, to the Schlüter heating circuit distributor (shipping unit = set with two units for hot and cold leg). Schlüter - BEKOTEC-THERM-KV clamp connection Ø mm set = 2 units / Set Set 16 BTZ2KV BTZ2KV BTZ2KV BTZ2KV Schlüter - BEKOTEC-THERM-KU Schlüter - BEKOTEC-THERM-KU is a 3/4" (DN 20) connection coupling made of nickel plated brass for the connection of Schlüter heating pipes, diameter 12, 14 or 16 mm. Schlüter - BEKOTEC-THERM-KU connection coupling Ø mm / U. 16 BTZKU BTZKU BTZKU Schlüter - BEKOTEC-THERM-KUS Schlüter - BEKOTEC-THERM-KUS is a 3/8" (DN 10) connection coupling made of nickel plated brass for the connection of Schlüter heating pipes, diameter 10 mm. Schlüter - BEKOTEC-THERM-KUS connection coupling Ø mm / U. 10 BTZKU 10 S Schlüter - BEKOTEC-THERM-AN Schlüter - BEKOTEC-THERM-AN is a 1/2" x 3/4" connector fitting made of nickel plated brass. One side has a self sealing 1/2" (DN 15) external thread, while the other side features a 3/4" (DN 20) compression fitting for connecting the 14 mm or 16 mm Schlüter heating pipe. Schlüter - BEKOTEC-THERM-AN connector fitting Ø mm set = 2 units / Set Set 16 BTZ2AN BTZ2AN New product box packaging

21 Schlüter - BEKOTEC-THERM-AW Schlüter - BEKOTEC-THERM-AW is a 1/2" x 3/4" angled connection fitting made of nickel plated brass that can be rotated. One side has a self sealing 1/2" (DN 15) external thread, while the other side features a 3/4" (DN 20) compression fitting for connecting the 14 mm or 16 mm Schlüter heating pipe. Schlüter - BEKOTEC-THERM-AW angled connector fitting Ø mm set = 2 units / Set Set 16 BTZ2AW BTZ2AW Schlüter - BEKOTEC-THERM-DA Schlüter - BEKOTEC-THERM-DA is a set of twin connectors made of nickel plated brass. It features a 3/4" (DN 20) cone joint nut on one side and two 3/4" (DN 20) cone connector threads on the other side for connecting the Schlüter heating pipes with diameters of 12 mm, 14 mm or 16 mm. The twin connector allows for setting up a second heating circuit at the control station BTBMS/ RT. In this case, the heating circuits must have approximately the same lengths and performance ratings. Schlüter -BEKOTEC-THERM-DA twin connector package = 2 units / Package Package BTZ 2 DA Note: The connection to the Schlüter - BEKOTEC-THERM heating pipes requires 1 set of clamp connections BTZ 2 KV as well as two angle clips BTZW Schlüter - BEKOTEC-THERM-DA-KVS Schlüter -BEKOTEC-THERM-DA-KVS is set of twin connectors made of nickel plated brass. It features a 3/4" (DN 20) cone joint nut on one side and two 3/8" (DN 10) cone connector nozzles on the other side for connecting the Schlüter heating pipes with diameter 10 mm. The twin connector allows for setting up a second heating circuit at a distributor branch. In this case, the heating circuits must have approximately the same lengths and performance ratings. Schlüter - BEKOTEC-THERM-DA-KVS twin connector package = 2 units / Package Package BTZ 2 DA KVS box packaging New product 21

22 Schlüter - BEKOTEC-THERM-PW Schlüter - BEKOTEC-THERM-PW is a blank set for retrofitting the calorimeter, partly pre-installed. Schlüter - BEKOTEC-THERM-PW pre plumb kit 290 mm mm 235 mm mm 50 BTZPW 20 V vertical components: One spacer fitting, length 110 mm, with outside threading 3/4" (DN 20) Two 90 angles Two ball valves 3/4" (DN 20) One ball valve 3/4" (DN 20) with sensor connection for directly immersed sensors (5 mm, M10 x 1) Separate sensor connector 1/2" for directly immersed sensors (5 mm, M10 x 1) Two flat gaskets 1" (DN 25) BTZPW 20 H horizontal components: One spacer fitting, length 110 mm, with outside threading 3/4" (DN 20) Two ball valves 3/4" (DN 20) One ball valve 3/4" (DN 20) with sensor connection for directly immersed sensors (5 mm, M10 x 1) Separate sensor connector 1/2" for directly immersed sensors (5 mm, M10 x 1) Two flat gaskets 1" (DN 25) / Set Set BTZPW 20 V BTZPW 20 H Note: The blank set for the measuring mechanism of the calorimeter is usually attached to the cold leg. Depending on the connection situation, it may become necessary to attach the distributor terminal for the cold leg above or below. Follow the manufacturer s instructions for the selected calorimeter. The space requirements are important for the selection of the distributor cabinet (see table on page 25). 1" 1" 200 mm 385 mm 50* 50* 60* *mm 3/4" 3/4" Schlüter - BEKOTEC-THERM-RVT/HV2 Schlüter - BEKOTEC-THERM-RVT/HV2 is a fixedvalue control station for setting the supply temperature. It contains two integrated heating circuits and can be expanded with a direct connection of the Schlüter - BEKOTEC heating circuit distributor. They can be installed in the distributor cabinets VSE/VSV with an additional heating circuit distributor of 2 to max. 9 heating circuits. The fixed-value control supplies the Schlüter - BEKOTEC-THERM ceramic thermal-comfort floor with the required low supply temperatures by adding heating water from warmer heating circuits (e.g. radiator circuits). The following components are integrated in the set and pre-assembled: High-efficiency pump with safety temperature limiter (STB) Thermostat valve (DN 20) 3/4 IG on the connection side, with adjustable thermostat head and immersion sensor (20 50 C) Stainless steel distributor bar for the supply line with end cap (DN 25) Stainless steel distributor bar for return line with end cap (DN 25) Adjustable return valve (DN 20), 3/4 IG on the connection side Adjustable bypass with flow indicator and immersion sensor (sensor recording) Supply line flow indicator for each heating circuit with a scale of 0.5 to 5.0 l/min Thermostat valve with manual adjustment cap for each heating circuit, to match retrofitting with Schlüter - BEKOTEC actuators Schlüter - BEKOTEC-THERM-RVT/HV2 control station for supply temperature DN 25 / Set Set BTRVT HV2 DE Filling and vent cock 1/2 (DN 15), rotating, nickel-plated brass 2 distributor brackets with sound insulation insert for installation in distributor cabinet VSE/VSV or for wall mounting system also includes two separate 3/4 blind caps for closing unused heating circuits Note: The control technology and hydraulic conditions must be inspected by a qualified expert prior to installation. A supply pump (primary pump) must be installed. The installation and assembly instructions have to be followed. We recommend the use of our control modules for system control, Schlüter -BEKOTEC-THERM- ESM with the pump control module extension Schlüter -BEKOTEC-THERM- ESME/P. The pump control module extension switches off the pump of the fixed-value supply temperature control when all actuators at the heating circuit distributor are closed. This variation ensures the energy-efficient operation of the fixed-value control station. 22 New product box packaging

23 118 mm Schlüter - BEKOTEC-THERM-ZV Schlüter - BEKOTEC-THERM-ZV is a heating zone valve that simultaneously operates all heating circuits connected to the Schlüter - BEKOTEC heating circuit distributor by opening or closing. The heating zone valve can be controlled by a Schlüter actuator. The unit is controlled either by Schlüter control components or through an external control unit. Connection/material: threaded connection/valve 1" (DN 25) of nickel plated brass. Schlüter - BEKOTEC-THERM-ZV heating zones valve / U. BTZZV Note: During installation, it is important to observe the flow direction shown with an arrow on the valve. kvs = 4.2 m 3 / h BTBMS Schlüter - BEKOTEC-THERM-BMS Schlüter - BEKOTEC-THERM-BMS/RT The Schlüter - BEKOTEC-THERM-BMS control station is a simple control concept to supply smaller areas equipped with one or two Schlüter - BEKOTEC-THERM heating circuits. The control station Schlüter - BEKOTEC-THERM- BMS/RT is equipped with an additional interior thermostat that allows for switching the control station depending on room temperature. The control station supplies the Schlüter - BEKOTEC- THERM ceramic thermal comfort floor with the required low supply temperatures by mixing in heating water from warmer heating circuits, e.g. from the radiator circuit. It is suitable for use in the Schlüter - BEKOTEC- THERM distributor cabinet models BTVSE 4 and BTVSV 4. A second heating circuit can be implemented with an available set of twin connectors (order separately, Art.- No.: BTZ 2 DA). In this case, the heating circuits must have approximately the same lengths and performance ratings. For further technical information please refer to the corresponding installation and operating instructions. Schlüter - BEKOTEC-THERM-BMS control station / Set BTBMS BTBMS/RT BTBMS/RT Note: The clamp connections BTZ 2 KV are not included with the control station and must be ordered separately to match the diameter of the heating pipes. Prior to installation, a qualified expert should inspect the control technology and hydraulic installations. The installation and assembly instructions of the manufacturer must be observed. box packaging 23

24 Schlüter - BEKOTEC-THERM-RTB Schlüter - BEKOTEC-THERM-RTB is a return temperature limiter valve for concealed installation into the wall. It is installed at the end of a Schlüter - BEKOTEC- THERM heating circuit and can be utilised to limit the water temperature in the preceding heating circuit. In addition, it serves to control the floor temperature in rooms with existing heaters. The temperature limiter can be adjusted to temperatures ranging from 20 to 40 ºC. The unit includes: - Recessed wall installation box with adjustable installation depth W x H x D = 135 x 190 x 57 approximately 75 mm - Aperture, white, W x H = 145 x 200 mm - Two attachment brackets - RTB valve made of brass, including exhaust valve and flush valve with valve connections AG 3/4" (DN 20), which match the clamping ring threading BTZ 2 KV. - Thermostat head for return temperature, adjustable from 20 to 40 C - Installation manual. Schlüter - BEKOTEC-THERM-RTB return temperature limiter valve / U. BTRTB Note: The connection to the Schlüter - BEKOTEC-BTHR heating pipes requires a set of clamp connections BTZ 2 KV. The connector fitting BTZ 2 AN or the angled connector fitting BTZ 2 AW can be used at the transition to the existing heating system (see page 20/21). Prior to installation, a qualified expert should inspect the control technology and hydraulic installations. The installation and assembly instructions of the manufacturer must be observed. Maximum heating circuit lengths: Heating pipe Ø 16 mm = 80 m Heating pipe Ø 14 mm = 70 m Heating pipe Ø 12 mm = 60 m Heating pipe Ø 10 mm = 50 m 24 Schlüter - BEKOTEC-THERM-RRB Schlüter - BEKOTEC-THERM-RRB is a room temperature control valve with bypass function for installation in the wall. It can be used for the room temperature control of a heating circuit without additional auxiliary energy (power). Prerequisite: The heating water supply temperature may not exceed 50 C. The unit is installed in the wall at the beginning of a Schlüter - BEKOTEC-THERM floor heating circuit. The settings of the bypass valve allow for maintaining a consistent base temperature at the floor surface. This prevents the floor from cooling off completely, and the base temperature for areas used with bare feet can be reliably set. Thanks to a thermostat button, the room temperature is adjustable from 7 to 28 C. The unit includes: - Wall installation box with adjustable installation depth W x H x D = 135 x 190 x 57 mm - Two attachment brackets - Panel, white W x H = 145 x 210 mm, integrated room temperature control with adjustment range from 7 to 28 C - Brass RRB valve including venting and rinsing valve, with valve connectors AG 3/4 (DN 20), matching the clamp connections BTZ 2 KV - Bypass valve for base volume flow - Adjustment insert for overall volume flow - Installation manual. Schlüter - BEKOTEC-THERM-RRB room control valve with bypass / U. box packaging BTRRB Note: The connection to the Schlüter - BEKOTEC-BTHR heating pipes requires a set of clamp connections BTZ 2 KV. The connector fitting BTZ 2 AN or the angled connector fitting BTZ 2 AW can be used at the transition to the existing heating system (see page 20/21). Prior to installation, a qualified expert should inspect the control technology and hydraulic installations. The installation and assembly instructions of the manufacturer must be observed. Maximum heating circuit lengths: Heating pipe Ø 16 mm = 80 m Heating pipe Ø 14 mm = 70 m Heating pipe Ø 12 mm = 60 m Heating pipe Ø 10 mm = 50 m

25 Schlüter - BEKOTEC-THERM-VSE Schlüter - BEKOTEC-THERM-VSE is a distributor cabinet for concealed mounting to house the Schlüter heating circuit distributor manifold and the matching control components. The concealed cabinet consists of galvanised steel with two stabilising double edges around the perimeter and perforations in the lateral walls for inserting the connector pipes. The unit includes: - Two lateral height adjustable installation pedestals, adjustable from 0 to 90 mm - Screed panel, height adjustable and removable - Heating pipe rail - Two adjustable attachment rails for Schlüter heating circuit distributor manifold and an additional installa- tion rail for simple plug in installation of the Schlüter control modules. The powder coated frame and door come in separate packaging and can be retrofitted with four tuck flaps with wing screws, with variable attachment options for in wall openings of 110 to 150 mm. The door can be closed with a turning latch. Colour: BW = Brilliant white Note: A lock with standard keys is available as a special accessory ( BTZS). Schlüter - BEKOTEC-THERM-VSE distributor cabinet for concealed mounting Outside dimensions (W x H x D = mm) Inside dim. (B = mm) Maximum heating circuits without PW* Maximum heating Maximum heating circuits circuits with PW* vertical with PW* horizontal Maximum heating circuits with incl. RVT** BTVSE 4 BW 490 x 705 x BTVSE 5 BW 575 x 705 x BTVSE 8 BW 725 x 705 x BTVSE 11 BW 875 x 705 x BTVSE 12 BW 1025 x 705 x BTZS Distributor cabinet lock with 2 standard keys * PW = blank set for calorimeter ** RVT = fixed value control station BTRVT HV2 DE with two integrated heating circuit connections / U. Schlüter - BEKOTEC-THERM-VSV Schlüter - BEKOTEC-THERM-VSV is a distributor cabinet for surface mounting to house the Schlüter heating circuit distributor manifold and the matching control components. The distributor cabinet consists of galvanised steel with powder coating on the inside and outside. The unit includes: - Two lateral height adjustable installation pedestals, adjustable from 0 to 90 mm - Screed panel, removable - Heating pipe rail - Two adjustable attachment rails for Schlüter heating circuit distributor manifold and an additional installation rail for simple plug in installation of the Schlüter control modules. Cabinet depth: 125 mm. The door can be closed with a turning latch. Colour: BW = Brilliant white Note: A lock with standard keys is available as a special accessory ( BTZS). Schlüter - BEKOTEC-THERM-VSV distributor cabinet for wall mounting Outside dimensions (W x H x D = mm) Inside dim. (B = mm) Maximum heating circuits without PW* Maximum heating Maximum heating circuits circuits with PW* vertical with PW* horizontal Maximum heating circuits with incl. RVT** BTVSV 4 BW 496 x 620 x BTVSV 5 BW 582 x 620 x BTVSV 8 BW 732 x 620 x BTVSV 11 BW 882 x 620 x BTVSV 12 BW 1032 x 620 x BTZS Distributor cabinet lock with 2 standard keys * PW = blank set for calorimeter ** RVT = fixed value control station BTRVT HV2 DE with two integrated heating circuit connections / U. box packaging 25

26 Schlüter - BEKOTEC-THERM-ER/C Schlüter - BEKOTEC-THERM-ER/C is an interior "Control" thermostat available in 230 Volt or 24 Volt with removable digital clock for programming the time controlled electronic temperature settings. The digital clock is suitable for programming daily or weekly programs with eight switch times (four times on/four times off) and can be used for the time control of a room or as a pilot clock for several rooms (room group control). Manual settings for daylight savings time ± 1 hour, power reserve for 100 hours. The target temperature can be set on a dial from 10 to 28 C and can be limited by a set point limit. An adjustable time controlled temperature reduction mechanism of 2 to 6 C is integrated. The operating status Temperature decrease on/off is shown by an LED and can also be activated manually if required. A pulse width modulation is integrated to prevent variations in room temperature. The unit is easy to install by plugging into the previously installed mounting socket for the interior thermostat. Schlüter - BEKOTEC-THERM-ER/C interior thermostat Control AC/DC Volt / U. 230 V BTER 230 C/BW V BTER 24 C/BW Colour: BW = Brilliant white Dimensions W/H/D: 118 x 79 x 27 mm Note: Be sure to order mounting socket Schlüter - BEKOTEC-THERM-ER/M ( BTERM) separately. Schlüter - BEKOTEC-THERM-ER/K Schlüter - BEKOTEC-THERM-ER/K is an interior "Comfort" thermostat available in 230 Volt or 24 Volt with electronic temperature control. The target temperature can be set on a dial from 10 to 28 C and can be limited by a set point limit. A time controlled temperature reduction of 2 to 6 C is possible by using the Schlüter - BEKOTEC-THERM-ER/C unit as a pilot clock or adding the control module expansion Schlüter - BEKOTEC-THERM-ESME/T with timer. The operating status Temperature decrease on/off is shown by an LED and can also be activated manually if required. A pulse width modulation is integrated to prevent variations in room temperature. The unit is easy to install by plugging into the previously installed mounting socket for the interior thermostat. Schlüter - BEKOTEC-THERM-ER/K interior thermostat Comfort AC/DC Volt / U. 230 V BTER 230 K/BW V BTER 24 K/BW Colour: BW = Brilliant white Dimensions W/H/D: 93 x 79 x 27 mm Note: Be sure to order mounting socket Schlüter - BEKOTEC-THERM-ER/M ( BTERM) separately. Schlüter - BEKOTEC-THERM-ER/S Schlüter - BEKOTEC-THERM-ER/S is an interior "Standard" thermostat available in 230 Volt or 24 Volt with electronic temperature control. The target temperature can be set on a dial from 10 to 28 C and can be limited by a set point limit. A time controlled temperature reduction of 2 C is possible by using the Schlüter - BEKOTEC-THERM-ER/C unit as a pilot clock or adding the control module expansion Schlüter - BEKOTEC-THERM-ESME/T with timer. A pulse width modulation is integrated to prevent variations in room temperature. The unit is easy to install by plugging into the previously installed mounting socket for the interior thermostat. Schlüter - BEKOTEC-THERM-ER/S interior thermostat Standard AC/DC Volt / U. 230 V BTER 230 S/BW V BTER 24 S/BW Colour: BW = Brilliant white Dimensions W/H/D: 84 x 79 x 27 mm Note: Be sure to order mounting socket Schlüter - BEKOTEC-THERM-ER/M ( BTERM) separately. 26 box packaging

27 Schlüter - BEKOTEC-THERM-ERF/K Schlüter - BEKOTEC-THERM-ERF/K is a wireless interior "Comfort" thermostat for wireless electronic temperature control. The target temperature can be set on a dial from 10 to 28 C and can be limited by a set point limit. The control module extension with timer (Schlüter - BEKOTEC-THERM-ESME/T) allows for a fixed temperature reduction by 4 C. The operating status Temperature decrease on/off is shown by an LED and can also be activated manually if required. A pulse width modulation is integrated to prevent variations in room temperature. Schlüter - BEKOTEC-THERM-ERF/K wireless interior thermostat / U. BTERFK/BW Colour: BW = Brilliant white Dimensions W/H/D: 93 x 79 x 27 mm Note: A mounting socket is not required. Batteries are included in delivery. The control module extension ESME/24KH allows for controlling basic cooling. Schlüter - BEKOTEC-THERM-ER/KKH Schlüter - BEKOTEC-THERM-ER/KKH is a "cooling/heating" thermostat with electronic temperature control for cooling and heating in a 24 Volt version. The temperature reference value is adjustable from 10 to 28ºC with the help of a dial and can be limited by a reference value limiter. A time controlled temperature change from 2 to 6ºC is possible. The operating modes are shown with separate LED indicators. The control module extension ESME/24KH must be used for heating/cooling switches of all thermostats connected to the Schlüter - BEKOTEC-THERM control module (24 Volt). A pulse width modulation is integrated to prevent variations in room temperature. The unit is easy to install and is simply plugged into the previously installed thermostat mounting base. Schlüter - BEKOTEC-THERM-ER/KKH interior thermostat cooling/heating / U. BTER 24 KKH/BW Colour: BW = Brilliant white Dimensions W/H/D: 93 x 79 x 27 mm Note: Please order the mounting base Schlüter -BEKOTEC-THERM-ERM (part no. BTERM) separately. The cooling mode only offers basic cooling without exact temperature control. Only control components for 24 Volt can be used. Schlüter - BEKOTEC-THERM-ERM Schlüter - BEKOTEC-THERM-ERM is a mounting base for the electronically controlled Schlüter thermostats ER/C, ER/K, ER/S, and ER/KKH, 230 Volt or 24 Volt. The unit can be installed over a conventional, concealed junction box. Schlüter - BEKOTEC-THERM-ERM mounting socket for interior thermostats AC/DC Volt / U. 230/24 V BTERM Schlüter - BEKOTEC-THERM-ESA Schlüter - BEKOTEC-THERM-ESA is an actuator for either 230 Volt or 24 Volt to control the flow of the cold leg valves. It is mounted by plugging into the valves of the cold leg of the Schlüter heating circuit distributor. Actuators are equipped with a volume display, including a control function of the valve adapters and a protection mechanism against moisture. The valve is delivered in open condition (first open function). Zero current circuit Connector cable 1 m, plug in type Schlüter - BEKOTEC-THERM-ESA actuator AC/DC Volt / U. 230 V BTESA V BTESA Dimensions W/H/D: 44 x 51 x 48 mm Note: Wireless control requires the 24 Volt actuator. box packaging 27

28 230 V 24 V Schlüter - BEKOTEC-THERM-ESM R6 Schlüter - BEKOTEC-THERM-ESM R6 is a control module available in 230 Volt or 24 Volt as a switch connection between Schlüter interior thermostats and actuators. The unit is installed by simply plugging into the installation rail of the Schlüter distributor cabinet. The cable connections to the main supply and the Schlüter actuators and interior thermostats are simple plug in clamps. The allocation is clearly labelled with colour coding. The switching capacity is designed for a maximum of six interior thermostats (= six rooms) with one to four actuators (heating circuits), with a maximum limit of 14 actuators per control module. Function displays for Operating power", Fuse" and Switched output to interior thermostat ON". The Schlüter Control module 24 Volt is equipped with an integrated transformer. Schlüter - BEKOTEC-THERM-ESM R6 control module AC/DC Volt / U. 230 V BTESM 230 R V BTESM 24 R Dimensions W/H/D: 230 Volt = 238 x 75 x 70 mm 24 Volt = 305 x 75 x 70 mm Note: The following expansion modules can be added for 230 Volt or 24 Volt models with plug in connections: Schlüter - BEKOTEC-THERM-ESME/T Schlüter - BEKOTEC-THERM-ESME/SA Schlüter - BEKOTEC-THERM-ESME/R Schlüter - BEKOTEC-THERM-ESME/P Schlüter - BEKOTEC-THERM-ESME/PD Schlüter - BEKOTEC-THERM- ESME/24KH 230 V Schlüter - BEKOTEC-THERM-ESM R1 Schlüter - BEKOTEC-THERM-ESM R1 is a 230 Volt or 24 Volt control module that serves as the switched connection between the interior thermostats and the actuators. The modules are simply plugged into the installation rail that is integrated into the Schlüter distribution cabinet. The wiring connections for power supply and with the Schlüter actuators and interior thermostats are designed as simple plug in connections. The connections are clearly labelled with colour coding. The switching capacity is designed for interior thermostats with one to four actuators (= heating circuits). The control features a functional display for Supply voltage", Fuse and Thermostat output activated". The Schlüter 24 Volt control module is equipped with an integrated transformer. Schlüter - BEKOTEC-THERM-ESM R1 control module for single room AC/DC Volt / U. 230 V BTESM 230 R V BTESM 24 R Dimensions W/H/D: 230 Volt = 88 x 75 x 70 mm 24 Volt = 157 x 75 x 70 mm Note: The following expansion modules can be added for 230 Volt or 24 Volt models with plug in connections: Schlüter - BEKOTEC-THERM-ESME/T Schlüter - BEKOTEC-THERM-ESME/SA Schlüter - BEKOTEC-THERM-ESME/R Schlüter - BEKOTEC-THERM-ESME/P Schlüter - BEKOTEC-THERM-ESME/PD Schlüter - BEKOTEC-THERM- ESME/24KH 24 V 28 box packaging

29 Schlüter - BEKOTEC-THERM-ESMF Schlüter - BEKOTEC-THERM-ESMF is a wireless control module with either six or 12 channels (interior thermostats) and integrated 24 Volt transformer as a switch connection between Schlüter wireless interior thermostats and actuators. The unit is installed by simply plugging in to the installation rail of the Schlüter distributor cabinet. The cable connections to the main supply and the Schlüter actuators and interior thermostats are simple plug in clamps. The allocation is clearly labelled with colour coding. The switching capacity is designed for a maximum of six or 12 channels (interior thermostats) with one to four actuators (heating circuits) each, with a maximum of 13 actuators. The interior thermostats can be freely allocated to one to four actuators per channel. Function displays for operating power 24 Volt, wireless reception control, Switched output to interior thermostat ON. Protection switch in case of interior thermostat failure (freeze protection mode). Wireless transmission test required before operation. Schlüter - BEKOTEC-THERM-ESMF wireless control module Channels / U. 6 BTESMF 24 R BTESMF 24 R Dimensions W/H/D: 305 x 75 x 70 mm Note: The following expansion models of the 24 Volts type can be plugged in: Schlüter - BEKOTEC-THERM-ESME/T Schlüter - BEKOTEC-THERM-ESME/SA Schlüter - BEKOTEC-THERM-ESME/P Schlüter - BEKOTEC-THERM-ESME/PD Schlüter - BEKOTEC-THERM- ESME/24KH Schlüter - BEKOTEC-THERM-ESM R12 KNX/EIB Schlüter - BEKOTEC-THERM-ESM R12 KNX/EIB is a 24V control module for connecting external thermostats/sensors from building control/automation systems (KNX/EIB) to Schlüter - BEKOTEC 24V actuators. The modules are simply plugged into the installation rail that is integrated into the Schlüter distribution cabinet. The wiring connections for power supply and with the actuators are designed as simple plug-in connections. They are clearly labelled with a colour coding system. The switching capacity is designed for max. 12 interior thermostats/sensors (=12 rooms) with 1 4 actuators (heating circuits) each, but cannot exceed 13 actuators per control module. Functional display for Supply voltage, Fuse and Thermostat output activated. The Schlüter 24 V control module is equipped with an integrated 230/24 V transformer. Schlüter - BEKOTEC-THERM-ESM R12 KNX/EIB control module KNX/EIB AC/DC Volt / U. 24 V BTESM 24 R12 KNX Dimensions W/H/D: 24 Volt = 305 x 75 x 70 mm Note: The following extension modules can be plugged in with consideration for the operating voltage of 24V: Schlüter -BEKOTEC-THERM-ESME/SA Schlüter -BEKOTEC-THERM-ESME/P Schlüter -BEKOTEC-THERM-ESME/PD The initialisation and programming of BTESM 24 R12 KNX may only be performed by authorised, qualified electricians with KNX/EIB training. box packaging Schlüter - BEKOTEC-THERM-ESME/T Schlüter - BEKOTEC-THERM-ESME/T is a control module expansion with timer/digital clock and LCD display. It allows for programming two separate heating zones (room group control). Daily and weekly programs, with weekday blocks and daylight savings time settings can be programmed. 42 memory locations, 120 hours of power reserve. Simple installation by plug in connection. Suitable for 230 Volt, 24 Volt and wireless operation. Schlüter - BEKOTEC-THERM-ESME/T control module expansion with timer as digital clock Dimensions W/H/D: 65 x 75 x 46 mm New product / U. BTESMET

30 Schlüter - BEKOTEC-THERM-ESME/SA Schlüter - BEKOTEC-THERM-ESME/SA is a control module expansion for 230 Volt or 24 Volt for connecting one to eight additional actuators to an interior thermostat or one to four actuators each to two interior thermostats of the control module. A plug in jumper takes care of the allocation to the corresponding interior thermostats. Simple installation by plug in connection. Suitable for 230 Volt, 24 Volt and wireless operation. Schlüter - BEKOTEC-THERM-ESME/SA control module expansion for actuators AC/DC Volt / U. 230 V BTESME 230 SA V BTESME 24 SA Dimensions W/H/D: 88 x 75 x 70 mm Note: The 24 Volt expansion is to be used for wireless operation. Maximum number of actuators per control module: 14 (wireless: 13) Schlüter - BEKOTEC-THERM-ESME/R Schlüter - BEKOTEC-THERM-ESME/R is a control module expansion for connecting one or two additional interior thermostats with one to four actuators each. Simple installation by plug in connection. Suitable for 230 Volt and 24 Volt. Schlüter - BEKOTEC-THERM-ESME/R control module expansion for interior thermostat AC/DC Volt / U. 230 V BTESME 230 R V BTESME 24 R Dimensions W/H/D: 88 x 75 x 70 mm Note: Maximum number of actuators per control module: 14. Schlüter - BEKOTEC-THERM-ESME/P Schlüter - BEKOTEC-THERM-ESME/P is a control module expansion for pump control. The circulating pump is switched off when all actuators are closed. The wake flow time can be set to 0, 5, 10, or 15 minutes. Heating zones/control module operation mode can be allocated by plug in jumpers. Simple installation by plug in connection. Suitable for 230 Volt, 24 Volt and wireless operation. Schlüter - BEKOTEC-THERM-ESME/P control module expansion for pump control AC/DC Volt / U. 230 V BTESME 230 P V BTESME 24 P Dimensions W/H/D: 88 x 75 x 70 mm 30 box packaging

31 Schlüter - BEKOTEC-THERM-ESME/PD Schlüter - BEKOTEC-THERM-ESME/PD is a control module expansion dual pump module, which allows for pump control and the addition of another electrical consumer (e.g. a boiler). The circulating pump and another consumer are switched off when all actuators are closed. The follow on time can be set to 0, 5, 10, or 15 minutes. Simple plug in installation, suitable for 230 Volt, 24 Volt, or wireless systems. Schlüter - BEKOTEC-THERM-ESME/PD control module expansion dual pump module AC/DC Volt / U. 230 V BTESME 230 PD V BTESME 24 PD Dimensions W/H/D: 88 x 75 x 70 mm Schlüter - BEKOTEC-THERM-ESME/KH Schlüter - BEKOTEC-THERM-ESME/KH is a control module extension for cooling/heating that can switch all KKH thermostats connected to the Schlüter - BEKOTEC-THERM control module (24 Volt) from cooling to heating and vice versa. The switching takes place by way of a potential free contact on the side of the heat or cooling generator or manually by pushing the set button on the control module extension. The operating modes (cooling, heating, or automatic mode) are indicated by LEDs. Simple plug in installation. Suitable for 24 Volt only. Schlüter - BEKOTEC-THERM-ESME/KH control module extension cooling/heating AC/DC Volt / U. 24 V BTESME 24 KH Dimensions W/H/D: 88 x 75 x 70 mm Note: The control module extension cooling/ heating requires cooling/heating thermostats. Schlüter - BEKOTEC-THERM-ESME/PS Schlüter - BEKOTEC-THERM-ESME/PS is a control module extension in the form of a program plug for combining the base controls of channels C1 and C2 at the control module BTESM/R6. Channel C1 corresponds to the interior thermostat connections one, two and three, while channel C2 corresponds to the interior thermostat connections four, five and six of the BTESM/R6 control module. The program plug is used for the timed control of the interior thermostats connected to channels C1 and C2 via an interior thermostat of the Control series. The item is simply plugged into the control module or the last control module extension. Schlüter - BEKOTEC-THERM-ESME/PS control module extension program plug AC/DC Volt / U. 230 V BTESME 230 PS V BTESME 24 PS box packaging 31

32 Schlüter - BEKOTEC-THERM-ZWK Schlüter - BEKOTEC-THERM-ZWK is an electrically operated heating unit to cover additional heating requirements, for example in bathrooms. The heating unit is pre filled with heating unit fluid, sealed and intended for exclusively electrical heating operation with the corresponding electrical heating rod. An infrared remote control with receiving unit is included for operation. The desired room temperature, ranging from 5 to 30 C, can be set at the dial of the remote control unit. Additionally, users can select consistent heating for one or two hours with the Comfort Mode button. A control light (LED) displays the operating status (Comfort Mode 1h/off/2h). The receiving unit is suitable for installation on a concealed wall electrical box or directly onto the wall and is equipped with an On/Off button and a control light to display the operating status. Note: The predefined filling volume of the heating unit may not be changed. The integrated and pre assembled set includes: - Pre filled heating unit, made of vertical semi oval and horizontal round pipes with powder coating, brilliant white, RAL easy to install, depth adjustable attachment bases, white. - Infrared remote control (including batteries) - Infrared receiver IP24, switching capacity: 10 A/2000 W for installation on a concealed wall box or directly onto the wall. - Electrical heating rod IP54 (included), 380 W or 660 W, with 1.5 metre connection cable. The remaining air space allows for the heat expansion of the heating unit fluid. Electrical installation must meet local codes and regulations and comply with the applicable national requirements. Schlüter - BEKOTEC-THERM-ZWK heating unit W x H = mm Performance rating of heating rod / Set BTZEWK BW 500 x W BTZEWK BW 600 x W Set 32 box packaging

33 Calculation aid The cost of the radiant heated floor system, Schlüter - BEKOTEC-THERM, depends on several factors that are specific to the building project, e.g. the number and size of rooms, the number of heating circuits and the distance between the heating pipes, as well as the desired type of control technology must be factored into the calculation. Based on our own experience, we have calculated the material cost (using gross prices) of all required Schlüter - BEKOTEC-THERM components including control technology for 1 m 2 of a typical one family home. As an alternative, we have also calculated the average price for 1 m 2 of a commercial area of 500 m 2 without room divisions. These prices do not include the cost of labour and are shown in the table below. The values only represent mathematical guidelines and may vary depending on the specific circumstances of the building project. Other components of the construction, such as insulation, screed, Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4 and coverings are shown in the table without price indication and can be calculated on the basis of conventional pricing. In the case of screed, the lower material need and the associated quicker installation has to be considered. Calculation aid for a family home and/or a large commercial area: Calculation components Schlüter - BEKOTEC-THERM Cost for: Studded screed panels (EN/P without foil coating) Edging strips Heating pipes Heating circuit distributors and accessories Distributor cabinets Control technology (without time control) impact sound insulation Heat insulation Screed (approximately 30 l/m 2 ) Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4 Thin-bed tile adhesive Coverings Schlüter - DILEX intermediate movement joints Schlüter - DILEX perimeter movement joints Variants One family home: Installation width 150 mm Installation width 225 mm Large commercial area: Installation width 225 mm Installation width 300 mm List price / m 2 Material Labour Total approximately approximately approximately approximately Total cost 33

34 Schlüter - BEKOTEC-THERM Additional system components The Schlüter products described below are mandatory system components for damage free ceramic tile or natural stone coverings in conjunction with Schlüter - BEKOTEC-THERM (see separate price list). Schlüter - DITRA 25 or Schlüter - DITRA-DRAIN 4 Uncoupling mat Schlüter - DILEX Intermediate movement joint profiles Schlüter - DILEX Perimeter movement joint profiles Schlüter -DITRA 25 / -DITRA-DRAIN 4 uncouples the ceramic or natural stone covering from the screed, preventing the transfer of stresses or cracks from the substrate to the covering and ensuring even heat distribution. Schlüter -DITRA 25 can be used for bonded waterproofing in moist environments (for further information, please see product data sheets 6.1, 6.2). Schlüter -DILEX-BWB/-BWS/-KS/- EDP/-AKWS are movement joint profiles, which are installed for creating the necessary joint pattern of the covering over the Schlüter uncoupling mat. They effectively absorb expansions, e.g. those caused by temperature changes (for further information, please see product data sheets 4.6, 4.7, 4.8, 4.16, 4.18). Schlüter - DILEX is a flexible corner profile for the transition areas to skirting or wall tiles. Schlüter - DILEX-BWA / -AS are profiles for flexible connections to structural building elements (for further information, please see product data sheets 4.9, 4.10 and 4.14) Illustrated price list PS 14 Great Britain Effective 1 January 2014 Would you like additional information? Please write to us, give us a call, or visit us online at: Schlüter -PROFILES and -SYSTEMS Visit to find a complete overview of our system components. Simple. Clearly structured. Quick. At this site you can download data sheets, ask questions, or simply gather information. The site also lists your personal contacts in your region. welcome! 34

35 Standard Terms and Conditions of Sale 1. DEFINITIONS 1.1.»The Seller«means Schlüter-Systems Limited.»The Buyer«means all those purchasing Goods from the Seller.»Goods«means the goods which the SelIer sells to the Buyer and includes any service provided by the Seller relating to the Goods.»The Contract«means the contract for the sale of the Goods between the Seller and the Buyer formed when the Seller accepts the Buyer's offer to buy Goods from the Seller All contracts for the sale of Goods by the Seller to the Buyer shall be on and shall incorporate these terms and conditions to the exclusion of all other terms and conditions. No other terms and conditions (whether contained in any document issued by the Buyer or in any written or oral communication between the parties) shall be implied into the Contract whether by virtue of any usage or course of dealing or otherwise (including any term or condition implied into the Contract by statute or common law, to the extent that the law allows the implied term or condition to be excluded) except as expressly set out in the Contract These terms and conditions apply to all the Seller s sales of Goods and any variation to these terms and conditions and any representations about Goods shall have no effect unless expressly agreed in writing. The Buyer acknowledges that it has not relied on any statement, warranty, promise or representation made or given by or on behalf of the Seller which is not set out in these terms and conditions. Nothing in this condition shall exclude or limit the Seller s liability for fraud or fraudulent misrepresentation Each order from the Buyer, or acceptance by the Buyer of a quotation from the Seller for Goods, shall be deemed to be an offer by the Buyer to buy Goods subject to these terms and conditions. 2. FORMATION OF CONTRACT 2.1. Prior to acceptance, quotations may be withdrawn at any time by the Seller and will lapse automatically 30 days after issue unless otherwise agreed in writing by the Seller By ordering Goods from the Seller, whether in writing (which includes ) or by telephone, the Buyer is deemed to have accepted these terms and conditions Orders will be accepted subject to the Buyer s credit being and remaining to the satisfaction of the Seller and the Seller is entitled to cancel the Contract without liability should the Buyer s credit subsequently become inadequate for whatever reason. 3. DESCRIPTION 3.1. The quantity and description of Goods shall be as set out in the Seller s quotation or acknowledgement of the Buyer's order All samples, drawings, descriptive matter, specifications and advertising issued by the Seller and any descriptions or illustrations contained in the Seller s catalogues or brochures are issued or published for the sole purpose of giving an approximate idea of the Goods described in them. They shall not form part of the Contract and this is not a sale by sample The Seller reserves the right to amend the specification of Goods if required by any applicable statutory or regulatory requirements Any oral advice or recommendation given by the Seller, or its employees, agents or subcontractors, to the Buyer as to the storage, application or use of the Goods is followed entirely at the Buyer's own risk. The Supplier shall not be liable for any such advice or recommendation which is not set out in writing by the Seller. 4. DELIVERY 4.1. Although the Seller will endeavour to deliver the Goods within any delivery time specified, that time is an estimate and not a term of the Contract. In no event whatsoever will the Seller be liable for damages, losses, costs, charges or expenses of any kind including without limitation special, indirect and/or consequential damages, losses, costs, charges or expenses caused by any delay in delivery. Time of delivery shall not be of the essence and late delivery does not entitle the Buyer to terminate the Contract, save as per clause Any time specified will be automatically extended by any period or periods during which the delivery of the Goods or the work by the Seller in connection with the Contract is delayed due to an event of force majeure as set out in condition If any such delivery time is so extended by more than 6 weeks then the Buyer may give written notice to the Seller requiring the Goods to be delivered within 28 days of the date of such notice failing which the Buyer may give further written notice terminating the Contract immediately The Seller is entitled to deliver the Goods by instalments Where the Goods are to be delivered by instalments, each delivery will be a separate contract and failure by the Seller to deliver an instalment in accordance with the Contract or any claim by the Buyer in respect of any one or more instalments will not entitle the Buyer to treat the Contract as a whole as repudiated or to cancel any other instalment The delivery by the Seller of a greater or lesser quantity of the Goods than the quantity provided for in the Contract, or the delivery of Goods only some of which are defective, will not entitle the Buyer to reject all of the Goods delivered The parties will agree the place of delivery of the Goods. Where the delivery address is the Seller s premises, delivery of and passing of risk in the Goods to the Buyer will take place when the Buyer or his agent collects the Goods at the Seller s premises at any time after the Seller has notified the Buyer that the Goods are ready for collection. Where the delivery address is not the Seller s premises, delivery of and passing of risk in the Goods to the Buyer will take place by the Seller or his agent delivering the Goods to that place If the Buyer refuses or fails to take delivery of the Goods or fails to give the Seller adequate delivery instructions (otherwise than by reason of any cause beyond the Buyer s reasonable control or by reason of the Seller s fault) then, without prejudice to any other rights or remedies available to the Seller, the Seller may: store the Goods until actual delivery and charge the Buyer for the reasonable costs (including insurance) of storage; or sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract Where the delivery address is not at the Seller s premises, so that the Seller can comply with its carrier s conditions, any claim as to the amount of Goods delivered or for damage to the Goods in transit must be endorsed by the Buyer on the carrier s delivery documentation immediately on receipt of the Goods. Also, notification must be given in writing by the Buyer to the Seller within 7 days of the date of delivery of the Goods Any claim alleging an error in the type or quantity of Goods delivered must be made in writing by the Buyer to the Seller within 14 days of the date of delivery of the Goods, and in any event before installation or use of the Goods Unless a claim is made in accordance with conditions 4.9. and 4.10, the Buyer will be deemed to have accepted the Goods and waived all claims relating to error in quantity or type of the Goods delivered Subject to clause 4.10, if any Goods invoiced by the Seller are not delivered, to enable the Seller to claim against its carriers where appropriate, the Buyer must notify the Seller within 14 days of the date of invoice, failing which the Buyer will be liable to pay for the Goods in full Any liability of the Seller for non-delivery of the Goods shall be limited to replacing the Goods within a reasonable time or issuing a credit note against any invoice raised for the Goods which have not been delivered. This condition 4.13 shall not apply where the Buyer fails to accept delivery of any of the Goods when they are made available for delivery, or the Seller is unable to deliver the Goods on time because the Buyer has not provided sufficient and appropriate instructions, documents, licences or authorisations Any liability of the Seller in relation to the type or quantity of Goods ordered shall be limited to supplying the additional Goods (if there is a shortfall), to removing the additional Goods (if there is an excess) or replacing the Goods (if the incorrect Goods were delivered). This condition 4.14 shall not apply where the Buyer has ordered the incorrect type or quantity of Goods or has not provided sufficient, appropriate and/or accurate instructions to the Seller as to the type or quantity of Goods required. 5. RETENTION OF TITLE 5.1. The Seller retains ownership and the right to dispose of the Goods until either the Seller has received payment in full in cleared funds for all the Goods subject to the Contract and the full price of any other Goods supplied by the Seller to the Buyer under any other Contract otherwise howsoever, save that title in the Goods will pass to the Buyer at the moment immediately before the Buyer sells the Goods to a third party Provided that title in the Goods has not passed to the Buyer pursuant to clause 5.1, if payment or part of it is overdue, or immediately on the commencement of any act or proceeding relating (in the Seller s opinion) to the Buyer s solvency, the Seller may (in addition to its other rights) recover and resell the Goods and for that purpose the Buyer irrevocably licenses the Seller and persons authorised by it to enter the Buyer s premises or any other premises where the Seller believes the Goods to be during normal business hours Until title to the Goods has passed to the Buyer, the Buyer shall: keep the Goods free from any lien, charge or encumbrance; hold the Goods on a fiduciary basis as the Seller's bailee; at no cost to the Seller, store the Goods separately from all other goods held by the Buyer so that they remain readily identifiable as the Seller's property; not remove, deface or obscure any identifying mark or packaging on or relating to the Goods; and maintain the Goods in satisfactory condition and keep them insured against all risks for their full price from the date of delivery Notwithstanding any agreed credit period, payment will fall due immediately on the commencement of any act or proceeding relating (in the Seller s opinion) to the Buyer s solvency or upon the occurrence of any event which (in the Seller s opinion) places in jeopardy the Seller s title to the Goods The Seller may by notice to the Buyer transfer ownership in all or any part of the Goods specified in the notice to the Buyer The Buyer must notify the Seller forthwith of any attempts by third parties to seize or distrain against the Goods whilst in the Buyer s possession or power and before title has passed to the Buyer and must notify any such third parties of the Seller s ownership of the Goods. 6. PRICE 6.1. The price of the Goods will be in accordance with the Seller s published price list current at the date of delivery of the Goods. Prices in any earlier published price list or in any quotation are provisional only and are subject to adjustment to take account of increases in the Seller s costs and overhead expenses and any exchange rate fluctuation which cause the Seller s costs to increase Unless otherwise agreed by the Seller in writing, the price for the Goods shall be exclusive of all taxes (including value added tax) and all costs, fees, licences, duties or charges in relation to packaging, loading, unloading, carriage and insurance, all of which amounts the Buyer shall pay in addition when it is due to pay for the Goods The Seller may at its discretion charge such additional sum for delivery and insurance as is reasonable to cover: unusual or special arrangements requested by the Buyer; any request by the Buyer to change the delivery date, quantities and/or types of Goods ordered, or the specification of the Goods ordered; delivery outside the hours of Monday to Friday or during bank, statutory or public holidays; delivery during a day designated by the Seller from time to time as a day of closure. Such dates if any will be advised to the Buyer by the Seller s sales office upon the placing of an order; orders below the minimum order value as may from time to time be notified by the Seller s sales office. The minimum order value may be amended without prior notice; delivery to an address outside the UK and Eire mainlands; delays caused by instructions from the Buyer or by the failure of the Buyer to give adequate or accurate delivery instructions or information; any factor beyond the Supplier's control (including, but not limited to, foreign exchange fluctuations, increases in taxes and duties and increases in labour, materials or manufacturing costs). 7. PAYMENT 7.1. If the Seller has granted the Buyer credit facilities in writing, then except as provided in condition 5.3. payment in full in cleared funds must be made within 30 days following the end of the month of the date of invoice. Otherwise payment must be in cash prior to delivery. Payment must be made direct to the Seller at the address shown for payment on the Seller's invoice. The Buyer is not entitled to exercise any right of set-off, counter-claim, abatement or other similar deduction against any payment due to the Seller The Seller may withdraw any credit facility of the Buyer at any time at its sole discretion. Any outstanding payments will fall due immediately If the Buyer fails to pay any amount when due under this agreement, the Seller reserves the right to charge the Buyer interest on the overdue amount, payable by the Buyer immediately on demand, from the due date up to the date of actual payment, after as well as before judgment, at the rate applicable from time to time under the Late Payment of Commercial Debts (Interest) Act 1998 (as amended). Such interest shall accrue on a daily basis and be compounded monthly In the case of a buyer who is a company, although the Seller may submit accounts to the company, all directors (unless otherwise agreed) are personally liable for the Seller s charges and other obligations to the Seller in the event of the company s default. 8. WARRANTIES AND EXCLUSIONS 8.1. If the Buyer has purchased a Schlüter -BEKOTEC floor assembly system then the terms and conditions contained in the free 5 year limited warranty for the Schlüter -BEKOTEC floor assembly will apply in place of the terms and conditions set out in this condition 8, other than condition The Seller undertakes that if it is given timely notice in accordance with condition 8.3. that any of the Goods were defective on delivery and if the defect arises from faulty materials or workmanship in manufacture, the Seller will (at its election) repair or replace the defective items free of charge, other than delivery charges Notice must be given within 7 days of discovery of the defect and in any event not later than 12 months after delivery of the Goods The Buyer will retain the purportedly defective Goods at its premises (without making any further use of the Goods) until requested by the Seller to return them. Goods alleged to be defective will be subject to inspection and testing by the Seller at its own or (if the Seller so chooses) at the Buyer s premises and the Buyer will allow the Seller adequate facilities at the Buyer s premises to investigate the complaint The warranty contained in condition 8.2. will not apply if the defect is caused or contributed to by abuse, improper installation or application of the Goods, further use of the Goods after the Buyer first suspects that the Goods do not comply with the warranty in condition 8.2, failure to follow the Seller's written instructions or good trade practice regarding the storage, commissioning, installation, use and maintenance of the Goods, fair wear and tear, wilful damage, designs and specifications and items outside the Seller's scope of supply, misuse, neglect or repairs or modifications to the Goods without the Seller's approval or where the Goods have been damaged by accident or negligence in use, storage or transportation. The Seller s current brochures and technical information sheets contain details of the Goods and their application, and no representations or warranties are made as to their suitability for any other use, unless such use is expressly made in writing by the Seller All other conditions, warranties, statements and representations whether oral, written, express or implied, statutory or otherwise, including as to quality, fitness for any particular purpose, or as to correspondence with any sample are, to the fullest extent permitted by law, excluded from the Contract The Seller s liability under this warranty shall be limited to repair or replacement of the Goods (at the Seller s option). In no event whatsoever will the Seller be liable for special, indirect and/or consequential losses, damages, costs, charges or expenses Subject to condition 10.2, the Buyer will fully indemnify the Seller and keep the Seller indemnified against all losses, damages, costs or expenses and other liabilities (including legal fees) incurred by, awarded against or agreed to be paid by the Seller arising from the Buyer s abuse, improper installation or improper application of the Goods except and to the extent that such liabilities have resulted directly from the Seller's instructions. For the purposes of this condition 8.8, abuse includes the Buyer s failure to use, apply and install the Goods with (1) due care and skill using appropriately experienced and qualified personnel; and (2) the recommendations of the Seller as set forth in the Seller s current brochures and technical information sheets or other written instructions furnished by the Seller. 9. RESALE OF GOODS 9.1. The Buyer may resell the Goods to a third party on the condition that it: does not without the Seller's prior written consent make any promises or guarantees about the Goods beyond those contained in the promotional material supplied by the Seller, or otherwise incur any liability on behalf of the Seller; deals with all customer enquiries and/or complaints relating to the Goods promptly and in a professional manner; does not state, suggest, imply or lead people to infer (including without limitation through use of the trade mark SCHLÜTER and/ or any other trade mark of the Seller) that it is an agent of the Seller or an authorised or official distributor of the Seller s products; procures that any purchaser of the Goods from the Buyer enters into a legally binding agreement with the Buyer, placing such purchaser under the same obligations as are imposed on the Buyer by this clause 9; refers to the Seller any technical issues and questions relating to the Goods which the Buyer is unable to answer; and keeps full and proper books of account and records clearly showing all transactions and proceedings relating to the Goods The Buyer shall be entitled to advertise, promote and resell the Goods on its website in accordance with the terms of this condition 9.2. By virtue of the specialist nature of the Goods and in order to maintain the Seller's quality standards, it shall be a condition of the Contract that: the Buyer does not provide links on its website to the website of the Seller or any website owned by a company within the Seller's corporate group without the Seller's prior express permission and without entering into a formal linking licence agreement with the Seller; the Buyer uses on its website such promotional and advertising material as it may be from time to time be provided by the Seller. 10. LIMITATION OF LIABILITY - THE BUYER'S ATTENTION IS PARTICULARLY DRAWN TO THE PROVISIONS OF THIS CONDITION This condition 10 sets out the entire financial liability of the Seller (including any liability for the acts or omissions of its employees, agents and sub-contractors) to the Buyer in respect of: any breach of the Contract; the Goods or any part of them (including any use made of them by the Buyer) under any legal theory whatsoever; any representation, statement or tortious act or omission (including negligence) arising under or in connection with the Contract; or any other liability (including non-contractual) howsoever arising under any legal theory whatsoever arising out of or in connection with the Contract Nothing in these terms and conditions limits or excludes the liability of the Seller: for death or personal injury resulting from negligence or the negligence of its employees, agents, consultants or sub-contractors; for fraud or fraudulent misrepresentation or wilful default; or any other liability which is incapable of being excluded or limited by law Subject to condition 10.2, the Seller shall under no circumstances be liable to the Buyer whether in contract, tort (including negligence), breach of statutory duty, misrepresentation, restitution and/or otherwise howsoever under any legal theory whatsoever, for any of the following losses (whether direct, indirect, special and/or consequential): loss of profits or contracts; loss of anticipated savings; loss of income or revenue; loss of or damage to reputation or goodwill; loss of business; loss of opportunity; wasted management and/or other staff and/or office time; or losses or liabilities under or in relation to any other contract; nor for any other indirect, special and/or consequential loss, damage, costs, damages, charges or expenses Subject to condition 10.2, the Seller's total liability in contract, tort (including negligence), breach of statutory duty, misrepresentation, restitution and/or otherwise howsoever under any legal theory whatsoever arising under or in connection with the Contract shall in all circumstances be limited to the Contract price. 11. FORCE MAJEURE The Seller shall not be liable for any failure or delay in performing its obligations herein, (and, where delay has arisen, the date on which its obligations are to be fulfilled shall be extended for a period of time equal to the time lost) by reason of any acts of God or other causes beyond Seller s reasonable control ( force majeure ), including, but not limited to, acts of any governmental authority (including delay or failure to act), war (declared or undeclared), riot, revolution, acts of a public enemy, fires, wildcat strikes, labour disputes, floods, sabotage, epidemics, quarantine restrictions, freight embargoes, and unusually severe weather. 12. TERMINATION If the Buyer suffers (or appears to the Seller to be about to suffer) the on-set of insolvency, or ceases to carry on business, or stops paying its debts as they fall due, or is in breach of any term or condition of the Contract (including without limitation, a failure to pay any sums due under the Contract) the Seller may, without prejudice to its other rights, postpone delivery both in respect of the Contract in question and any other contracts with the Buyer until the breach has been rectified and/or (at its option) terminate the Contract (and/or any other such contracts) and recover payment for all deliveries already made and for any expenditure already incurred for the purpose of future deliveries (less any allowance for the value thereof as utilised by the Seller for other purposes) and also recover from the Buyer a sum equivalent to the Seller s loss of profit arising out of such termination. The exercise of the Seller s option to postpone delivery shall not prevent the subsequent exercise of the Seller s option to terminate the Contract and/or any other such contracts. 13. CANCELLATION The Contract may be cancelled by the Buyer only with the Seller s written consent. In the event of such cancellation the Seller will be entitled to charge the Buyer a cancellation charge, commensurate with the Seller s costs incurred up to the date of cancellation plus the Seller s loss of profit. 14. GENERAL If any provision (or any part of any provision) of the Contract is found by any court, tribunal or administrative body of competent jurisdiction to be wholly or partly illegal, invalid, void, voidable, unenforceable or unreasonable it shall, to the extent of such illegality, invalidity, voidness, voidability, unenforceability or unreasonableness, be deemed severable and the remaining provisions of the Contract and the remainder of such provision shall continue in full force and effect Failure or delay by the Seller in enforcing or partially enforcing any provision of the Contract shall not be construed as a waiver of any of its rights under the Contract Any waiver by the Seller of any breach of, or any default under, any provision of the Contract by the Buyer shall not be deemed a waiver of any subsequent breach or default and shall in no way affect the other terms of the Contract The parties to the Contract do not intend that any term of the Contract shall be enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it and any person who is not a party has no right to enforce any term of the Contract The Buyer shall not, without the prior written consent of the Seller, assign, transfer, mortgage, charge, subcontract or deal in any other manner with the Contract or all or any of its rights and obligations under the Contract or purport to do any of the same Any variation to these terms and conditions, including the introduction of any additional terms and conditions, shall only be binding when agreed in writing and signed by the Seller. 15. LAW AND JURISDICTION The Contract and any claim or dispute arising out of it or in connection with it or its subject matter or formation (including non-contractual disputes or claims) shall be governed by and construed in accordance with the law of England & Wales. The parties irrevocably agree that the Courts of England & Wales shall have jurisdiction to settle any dispute or claim that arises out of or in connection with the Contract or its subject matter or formation (including non-contractual disputes or claims), save that the Seller may bring proceedings against the Buyer in the Court having jurisdiction where the Buyer resides or carries on business. 16. NOTICES Any notices or other documents to be served under the Contract shall be in writing and addressed to the party to be served at its registered office address or to such other address as may from time to time be specified in writing by the relevant party as its address for the purpose of this condition. Such notices may be delivered by hand or sent by fax or special delivery post Notice served by facsimile to the appropriate terminal of the party to be served will be deemed properly served on the day of transmission if followed by a first class letter properly addressed signed by or on behalf of the party serving the notice. 35

36 Schlüter - DITRA-HEAT-E The ideal complement for even greater comfort of living! Electrical floor heating with Schlüter -DITRA technology. System-compatible with Schlüter -BEKOTEC-THERM. For more information visit Presented by (your construction materials specialist): All previous price lists lose their validity on the publication of this price list. Errors, changes, and printing mistakes as well as changes necessary in the interest of product innovation or shipping reserved. For reasons of printing, colours shown in this price list may differ from actual product colours. Schlüter-Systems KG Schmölestraße 7 D Iserlohn Tel.: Fax: info@schlueter.de Schlüter-Systems Ltd s 4 5 Bardon 22 Beveridge Lane Coalville Leicestershire LE67 1TE Tel.: Fax: technical@schluter.co.uk sales@schluter.co.uk /14 edition 11/13