Certificate No.: IECEx BVS , issue 3 Annex Page 1 of 9

Size: px

Start display at page:

Download "Certificate No.: IECEx BVS , issue 3 Annex Page 1 of 9"

Jeffrey Foster
5 years ago
Views:

1 Page 1 of 9 General product information: The Radar-Sensor type VEGAPULS PS6*(*).******** and type VEGAPULS PSSR68(*).******** is used to measure the distance between the surface of combustible dust generating material and the sensor. Model/Type designation: The complete type code is as follows: VEGAPULS PS 62(*). * * * * * * * * X = without; M = with A = M20x1,5; B = 1/2"NPT H = mA + HART B, I = 4 wire D = 22 wire ma + HART, sensitive version K = Profibus PA, sensitive version L = Foundation Fieldbus, sensitive version G, M = 4 wire, sensitive version sealing rings/process temperature 2 = Viton + PTFE / C 3 = Kalrez PTFE / C 6 = Kalrez PTFE / C 7 = Kalrez PTFE / C A = Viton + PEEK / C C = Kalrez PEEK / C E = Kalrez PEEK / C F = Kalrez PEEK / C H = Grafit + ceramics / C process connection see manual version / material * = with horn antenna or with parabolic antenna/1.4435(316l) DK = Ex d ia IIC T6 Ga/Gb, Gb (gem. IECEx PTB X) CK = Ex ia IIC T6 Ga, Ga/Gb, Gb (gem. IECEx PTB X, IECEx PTB X, IECEx PTB X, IECEx PTB X) RX =

2 Page 2 of 9 VEGAPULS PS 63(*). * * * * * * * X = without; M = with A = M20x1,5; B = 1/2"NPT H = ma + HART B, I = 4 wire D = 2 wire ma + HART, sensitive version K = Profibus PA sensitive version L = Foundation Fieldbus sensitive version G, M = 4 wire sensitive version process connection see manual version / material * = with horn antennas DK = Ex d ia IIC T6 Ga/Gb, Gb (gem. IECEx PTB X) CK = Ex ia IIC T6 Ga, Ga/Gb, Gb (gem. IECEx PTB X, IECEx PTB X, IECEx PTB X, IECEx PTB X) RX =

3 Page 3 of 9 VEGAPULS PS 66(*). * * * * * * * * X = without; M = with A = M20x1,5; B = 1/2"NPT H = ma + HART B, I = 4 wire sealing rings/process temperature 5 = EPDM / C 2 = Viton / C 3 = Kalrez 6375/ C G = Grafit and ceramics/ C with temperature adapter H = Grafit and ceramics/ C with temperature adapter process connection see manual version / material * = with horn antenna / (316L) DK = Ex d ia IIC T6 Ga/Gb, Gb (gem. IECEx PTB X) CK = Ex ia IIC T6 Ga, Ga/Gb, Gb (gem. IECEx PTB X, IECEx PTB X, IECEx PTB X, IECEx PTB X) RX =

4 Page 4 of 9 VEGAPULS PS 67(*). * B * * * * * X = without; A = with M = M20x1.5; N = 1/2"NPT H = mA + HART B, I = 4 wire process connection / material see manual version / material / process temperature B = with plastic horn antenna 80 mm / PP / C RX =

5 Page 5 of 9 VEGAPULS PSSR 68(*). * * * * * * * * VEGAPULS PS 68(*). * * * * * * * * X = without; M = with A = M20x1.5; B = 1/2"NPT H = ma + HART B, I = 4 wire sealing rings/process temperature 2 = Viton und PTFE / C 3 = Kalrez 6375 und PTFE / C 7 = Kalrez PTFE / C A = Viton + PEEK / C C = Kalrez PEEK / C E = Kalrez PEEK / C F = Kalrez PEEK / C H = Grafit + ceramics / C process connection see manual version / material * = with horn antenna or parabolic antenna/1.4435(316l) DK = Ex d ia IIC T6 Ga/Gb, Gb (gem.iecex PTB X) CK = Ex ia IIC T6 Ga, Ga/Gb, Gb (gem. IECEx PTB X, IECEx PTB X, IECEx PTB X, IECEx PTB X) RX = Parameters Electrical data VEGAPULS PS62/63(*).DK***K/L/P/F*** VEGAPULS PS66/68(*).DK***P/F*** VEGAPULS PSSR68(*).DK***P/F*** supply (terminals 1 [+], 2 [-]) U = 16 V V DC Um = 253V AC

6 Page 6 of 9 VEGAPULS PS62/63(*).DK***D/H*** VEGAPULS PS66/68(*).DK***H*** VEGAPULS PSSR68(*).DK***H*** supply (terminals 1 [+], 2 [-]) U = 14 V V DC Um = 253V AC VEGAPULS PS62/63(*).RX***D/H/K/L/P/F*** VEGAPULS PS67(*).RX**H/P/F*** VEGAPULS PS66/68(*).RX***H/P/F*** VEGAPULS PSSR68(*).RX***H/P/F*** supply terminals 1 [+], 2 [-] in the U = 9.7 V V DC compartment or in the terminal Umax = 30 V DC compartment regarding the two cell version VEGAPULS PS62/63(*).RX/DK***B/I/G/M*** VEGAPULS PS66/68(*).RX/DK***B/I*** VEGAPULS PSSR68(*).RX/DK***B/I*** VEGAPULS PS67(*).RX**B/I*** supply (terminals 1, 2 in the terminal compartment) AC V, 50/60 Hz or DC V or AC V, 50/60 Um = 253V AC output mA with superposed HART-signal (terminals 5[+], 7[-] in the terminal compartment) passive signal current, input mA with superposed HART-signal (terminals 6[+], 7[-] in the terminal compartment) VEGAPULS PS62/63(*).CK***D/H*** VEGAPULS PS66/68(*).CK***H*** VEGAPULS PSSR68(*).CK***H*** Supply and signal circuit terminals 1 [+], 2 [-] in the compartment or in the terminal compartment regarding the Ui = 30 V two cell version Ii = 131 ma Pi = 983 mw linear characteristics Li 5 μh Ci negligible in type of protection Intrinsic Safety Ex ia IIC only for connection to a certified intrinsically safe circuit with the following maximum values:

7 Page 7 of 9 VEGAPULS PS62/63(*).CK***K/L/P/F*** VEGAPULS PS66/68(*).CK***P/F*** VEGAPULS PSSR68(*).CK***P/F*** Supply and signal circuit terminals 1 [+], 2 [-] in the or in the terminal compartment regarding the two cell version in type of protection Intrinsic Safety Ex ia IIC, IIB for category 1 resp. category 1/2 equipment and Ex ia IIC, IIB resp. Ex ib IIC, IIB for category 2 equipment only for connection to a certified intrinsically safe circuit with the following maximum values: Ui = 17.5 V Ii = 500 ma Pi = 5.5 W The equipment is suitable for connection to a Fieldbus system according to the FISCO model (IEC ) e.g. PROFIBUS-PA or Foundation Fieldbus or Ui = 24 V Ii = 250 ma Pi = 1.2 W Li 5 μh Ci negligible VEGAPULS PS62/63(*).RX/CK/DK***D/H/K/L/P/F*** VEGAPULS PS66/68(*).RX/CK/DK***H/P/F*** VEGAPULS PSSR68(*).RX/CK/DK***H/P/F*** VEGAPULS PS67(*).RX**H/P/F*** adjustment and indication circuit in type of protection Intrinsic Safety Ex ia IIC (terminals 5, 6, 7, 8 in the compartment) only for connection to the intrinsically safe circuit of the associated VEGA adjustment and indication unit VEGADIS61 L cable 310 μh C cable 2,0 μf adjustment and indication circuit (spring contacts in the compartment) in type of protection Intrinsic Safety Ex ia IIC only for connection to the intrinsically safe signal circuit of the VEGA interface converter VEGACONNECT VEGAPULS PS62/63(*).RX/DK***G/M/B/I*** VEGAPULS PS66/68(*).RX/DK***B/I*** VEGAPULS PSSR68(*).RX/DK***B/I*** VEGAPULS PS67(*).RX**B/I*** adjustment and indication circuit (spring contacts in the compartment) in type of protection Intrinsic Safety Ex ia IIC only for connection to the intrinsically safe VEGA adjustment and indication unit (PLICSCOM) or CONNECT4

8 Page 8 of 9 Thermal data Permitted process temperature at the probe VEGAPULS PS62(*).***X**** X: 2 = Viton + PTFE / C 3 = Kalrez PTFE / C 6 = Kalrez PTFE / C 7 = Kalrez PTFE / C A = Viton + PEEK / C C = Kalrez PEEK / C E = Kalrez PEEK / C F = Kalrez PEEK / C H = Grafit + ceramics / C VEGAPULS PS63(*).***X**** X: N = capslulated horn antenna / TFM-PTFE / -40 C +200 C J = capslulated horn antenna / TFM-PTFE / -200 C +200 C R = capslulated horn antenna / TFM-PTFE (8 mm) / -40 C +200 C L= capslulated horn antenna / PFA / -40 C +200 C VEGAPULS PS67(*).*X***** X: B = PP / -40 C +80 C M = capslulated horn antenna / PFA (8 mm) / -40 C +200 C V = capslulated horn antenna TFM-PTFE+ Viton / -25 C +130 C E = capslulated horn antenna / TFM-PTFE+ EPDM / -40 C +130 C VEGAPULS PS66(*).****X**** X: 2 = Viton / -40 C +150 C 3 = Kalrez 6375 / -20 C +150 C 5 = EPDM / -40 C +150 C G = Grafit and ceramics / -60 C +250 C with temperature adapter H = Grafit and ceramics / -60 C +400 C with temperature adapter VEGAPULS PS68.***X**** X: 2 = Viton und PTFE / -40 C +130 C VEGAPULS PSSR68(*).***X**** 3 = Kalrez 6375 and PTFE / -20 C +130 C 7 = Kalrez 6230 and PTFE / -20 C +200 C A = Viton + PEEK / C C = Kalrez PEEK / C E = Kalrez PEEK / C F = Kalrez PEEK / C H = Grafit + ceramics / C Permitted ambient temperature at the -40 C +60 C Maximum surface temperature at the probe process temperature +2K

9 Page 9 of 9 Maximum surface temperature at the VEGAPULS PS62/63(*).RX/CK***D/K/L*** ambient temperature +22 K VEGAPULS PS62/63/66(*).RX/CK***H/P/F*** ambient temperature +22 K VEGAPULS PS/PSSR68(*).RX/CK***H/P/F*** ambient temperature +22 K VEGAPULS PS67(*).RX**H/P/F*** ambient temperature +22 K VEGAPULS PS62/63(*).RX***G/M*** VEGAPULS PS62/63/66(*).RX***B/I*** VEGAPULS PS/PSSR68(*).RX***B/I*** VEGAPULS PS67(*).RX**B/I*** VEGAPULS PS62/63(*).DK***D/K/L/G/M*** VEGAPULS PS62/63/66(*).DK***H/P/F/B/I*** VEGAPULS PS/PSSR68(*).DK***H/P/F/B/I*** Degrees of protection according to EN IP66

Certificate No.: IECEx BVS issue No. 1 Annex Page 1 of 8 Subject and Type

Certificate No.: IECEx BVS issue No. 1 Annex Page 1 of 8 Subject and Type Certificate No.: IECEx BVS 12.0066 issue No. 1 Page 1 of 8 Subject and Type VEGAFLEX FX81(*). I * * ** * * * * * * * Certificates: X = no, M - yes adjustment / indication module PLICSCOM X = without: A