WLPM Series SMD Molded Power Inductors
|
|
- Marshall Barber
- 6 years ago
- Views:
Transcription
1 WLPM25212 Series SMD Molded Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217
2 Features 1. Shielded construction. 2. Ultra low buzz noise. 3. Low DCR/µH. 4. Handles high transient current spikes without saturation. 5. Encapsulated body offers improved environmental protection and moisture resistance. 6. Higher dielectric withstanding voltage. 7. Corrosion resistant package. 8. RoHS Compliance. Applications 1. PDA/Notebook/Desktop/Server applications high current and low profile power supplier. 2. High current POL converters. 3. Battery powered devices. Shape and Dimension Code Dimensions(mm) L 2.5 ±.2 W 2. ±.2 T 1.2 MAX. e.5 ±.3 Recommend Pattern (Unit: mm) Page 2 of 1 ASC_WLPM25212 Series_V4. Jun. 217
3 Ordering Information WL PM M R33 P B Product Code Series Dimensions Thickness Tolerance Value Packing Code WL: Inductor SMD molded power inductor. 2.5 * 2.mm 1.2mm M: ± 2% R33=.33uH 2R2=2.2uH P=7 Reeled (Embossed tape) B:STD Electrical Characteristics WLPM25212 series Walsin Part Number L(uH) Tolerance Measuring Frequency (MHz),1V RDC Maximum (Ω) Rated Current (ma) (MAX.) (MAX.) Idc 1 Idc 2 WLPM25212MR47PB.47 M WLPM25212MR68PB.68 M WLPM25212M1RPB 1. M WLPM25212M1R5PB 1.5 M WLPM25212M2R2PB 2.2 M WLPM25212M3R3PB 3.3 M WLPM25212M4R7PB 4.7 M Maximum rated voltage: DC25V *)The saturation current value (Idc1) is the maximum DC current value having inductance decrease down to 3% (at 2 deg C) *)The temperature rise current value (Idc2) is the maximum DC current value having temperature increase up to 4degC. (at 2 deg C) *)The rated current is following either Idc1 or Idc2. which is the lower one. Caution for Temperature Rise. Temperature rise of this inductor depends on the installed board condition. It shall be confirmed in the actual end product that. temperature rise of inductor is within operating temperature. Operating temperature:-4 ~15 Storage temperature:-4 ~+85 Page 3 of 1 ASC_WLPM25212 Series_V4. Jun. 217
4 Electrical Properties DC Current Characteristics L VS Frequency Current Characteristics Inductance(µH) CSCA252D-R68M WLPM25212MR68PB DC DC Current Characteristics Temp. Rise T( ) Inductance(uH) WLPM25212MR68PB CSCA252D-R68M L VS FREQUENCE L VS Frequency ΔT( ) IDC(A) Frequency(MHz) Inductance(µH) Temp. Rise T( ) CSCA252D-1RM WLPM25212M1RPB DC DC Current Characteristics IDC(A) ΔT( ) Inductance(uH) WLPM25212M1RPB CSCA252D-1RM L VS L VS FREQUENCE Frequency Frequency(MHz) Inductance(µH) Temp. Rise T( ) WLPM25212M2R2PB CSCA252D-2R2M DC Current Characteristics IDC(A) ΔT( ) Inductance(uH) WLPM25212M2R2PB CSCA252D-2R2M L VS L VS FREQUENCE Frequency Frequency(MHz) Page 4 of 1 ASC_WLPM25212 Series_V4. Jun. 217
5 Reliability Testing Test Item Standard Test method Resistance to flexure substrate No damage. The test samples shall be soldered to the testing board and by reflow soldering conditions as show in page5 (Reflow profile chart). Apply pressure in the direction of the arrow until bent width reaches 2 mm. MECHANICAL CHARACTERISTICS Adhesion of Terminal electrode. Substrate size:1*4*1. Substrate material:glass epoxy-resin Solder cream thickness :.12 (Land size refer to recommended Land Pattern Dimensions of Precaution:) The test samples shall be soldered to the testing board and by reflow soldering conditions as shown page5 (Reflow profile chart). 1 N, 5 s Applied force:1 N to X and Y directions Duration:5 s. Solder cream thickness:.12mm (Land size refer to recommended Land pattern defined in Precaution ) Body strength No damage. Applied force :1 N Duration :1 s Page 5 of 1 ASC_WLPM25212 Series_V4. Jun. 217
6 Resistance to vibration Resistance to Soldering Solderability Temperature characteristics Thermal shock Low temperature life test observed in appearance. At least 9% of surface of terminal electrode is covered by new solder. Within±15%. The test samples shall be soldered to testing jig as shown in under table. Frequency range 1~55Hz 1.5mm(Shall not exceed acceleration Overall Amplitude 196 m/s 2 ) Sweeping Method 1 to 55 to 1 Hz for 1 min. 2 hours each in X,Y, and Z direction. 3 time of reflow oven at 23 degc min for 4 sec max. with peak temperature at 26+/-5 degc for 5 sec max. Substrate thickness. 1.mm Substrate material:glass epoxy-resin The test samples shall be submerged molten solder as shown in under table. Flux: methanol solution with 25% of rosin or equivalent. { Pb free solder: Sn-3Ag-.5Cu} Solder Temperature 245±5 deg C Immersing Speed {Eutectic solder} Solder Temperature Immersing Speed 5±.5s. 25 mm/s 23±5 deg C 5±.5s. 25 mm/s Measurement shall be taken in a temperature range of -4 degc to +85 degc and the value at +2 degc was used as the standard value. The test samples shall be soldered to the testing jig and by reflow soldering conditions as shown in page5 (Reflow profile chart). The test samples shall be left for the specified time at each of temperature in steps from 1 to 4, as shown in under table in sequence. The temperature cycles shall be repeated 1 cycled in the Method. Conditions for 1 cycle. Step Temperature (min) 1-4±3 deg C 3±3 2 Room Temp Within ±2 deg C 3±3 4 Room Temp Within 3 The test samples shall be soldered to the testing jig and by reflow soldering conditions as shown in page5 (Reflow profile chart). And after that proceed the test as shown condition under table. Temperature -4±2 deg C 1+24 h Page 6 of 1 ASC_WLPM25212 Series_V4. Jun. 217
7 Hihg temperature life test The test samples shall be soldered to the testing jig and by reflow soldering conditions as shown in page5 (Reflow profile chart). And after that proceed the test as shown condition under table. Temperature -4±2 deg C 5+24h ENVIRONMENT TESTS Damp heat life test Loading under damp heat life test The test samples shall be soldered to the testing jig and by reflow soldering conditions as shown in page5 (Reflow profile chart). The test samples shall be put in thermostatic oven set at temperature with humidity as shown in under table. Temperature Humidity 6±2 deg C 9~95%RH 5+24 h The test samples shall be soldered to the testing jig and by reflow soldering conditions as shown in page5 (Reflow profile chart). The test samples shall be put in thermostatic oven set at temperature with humidity, as shown in under table and with the rated current continuously applied. Temperature 6±2 deg C Humidity 9~95%RH Applied current Refer to Page h Standard measuring condition Unless otherwise specified, at least 2 hrs of recovery under the room temperature and normal humidity after the test. followed by the measurement within 48 hrs Page 7 of 1 ASC_WLPM25212 Series_V4. Jun. 217
8 Reflow Profile Chart (Reference): *Temperature on surface of circuit board 2.2 The products may be exposed to reflow soldering process of above profile up to two times. Page 8 of 1 ASC_WLPM25212 Series_V4. Jun. 217
9 Tape & Reel Packaging Dimensions Dimensions A B W F E P1 P2 P D T K Φ ±.1 ±.2 ±.5 ±.1 ±.1 ±.5 ±.1 ± ± max Direction of rolling Page 9 of 1 ASC_WLPM25212 Series_V4. Jun. 217
10 Reel Top tape strength Peel-off strength:.1n~1.2n Peel-off angle:165 ~18 Peel-off speed: 3mm/min Quantity per reel:3k pcs Page 1 of 1 ASC_WLPM25212 Series_V4. Jun. 217
WLPN Series SMD Molded Power Choke Inductors
WLPN303010 Series SMD Molded Power Choke Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN303010 Series_V3.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN404018 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLPN404018 Series_V2.0 Oct. 2016 Features 1. Close magnetic loop with
More informationWLPN Series Shielded SMD Power Inductors
WLPN505020 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN505020 Series_V0.0 Dec. 2016 1R0 Approval sheet Features 1. Close
More informationWLPN Series Shielded SMD Power Inductors
WLPN202012 Series Shielded SMD Power Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_WLPN202012 Series_V2.0 Sep. 2014 Features 1. Close magnetic loop with
More informationFrelTec GmbH. Shielded SMD Power Inductors Power Choke
GmbH Mathildenstr. 10A 82319 Starnberg Germany Power Choke 11/18/2015 1/16 GmbH www.freltec.com SPECIFICATION Part Number 175 0315D * 101 * M E02 ** Type Size Value Tolerance Packing 175 : Shielded SMD
More informationWLBD1608HC High Current Chip Bead
WLBD1608HC High Current Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_ WLBD1608HC Series_V5.0 Jun.2017 FEATURES 1. Closed magnetic circuit. 2. High current
More informationApproval sheet. WLBD2012 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD2012 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD2012 Series_V5.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1005 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1005 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1005 Series_V4.0 Jun. 2017 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD0603 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD0603 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD0603 Series_V2.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationApproval sheet. WLBD1608 Chip Bead. *Contents in this sheet are subject to change without prior notice.
WLBD1608 Chip Bead *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_ WLBD1608 Series_V4.0 Sep. 2016 FEATURES 1. Closed magnetic circuit. APPLICATIONS 1. Noise reduction
More informationWIP201610P Series Engineering Specification
RoHS Pb WIP201610P Series Engineering 1. Scope Feature Low Profile: 2.0 mm 1.6 mm 1.0 mm. Magnetically shielded structure to accomplish high resolution in EMC protection. Halogen free, Lead Free, RoHS
More informationThis specification applies to the Pb Free high current type SMD inductors for
SCOPE: This specification applies to the Pb Free high current type SMD inductors for PRODUCT INDENTIFICATION MSCDRI - 4012X - 100 M 1 2 3 4 1 Product Code 2 Dimensions Code 3 Inductance Code 4 Tolerance
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More information(1) SHAPES AND DIMENSIONS
Ⅰ. SCOPE: This specification applies to the Pb Free high current type SMD Common mode filter for MCM-2M-SERIES PRODUCT INDENTIFICATION MCM - 2M - 70 2 3 Product Code 2 Dimensions Code 3 Impedance Code
More informationINPAQ. Specification. WIP252012S L Series. Product Name. Power Inductor. Size EIAJ Global RF/Component Solutions
WIP252012S L Series Specification Product Name Series Power Inductor WIP252012S L Series Size EIAJ 2520 WIP252012S L Series Engineering Specification 1. Scope Feature High saturation current realized by
More informationWIP201610P L Series Engineering Specification
RoHS Pb WIP16P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More informationWIP252012P L Series Engineering Specification
RoHS Pb WIP212P L Series Engineering 1. Scope Feature High saturation current realized by material properties and structure design Low DC resistance to achieve high conversion efficiency and lower temperature
More information1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationNotice for TAIYO YUDEN products
Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2008. All of the contents specified herein
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationPREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationShielded Power Inductors TL- 4020SG Series (4.0 x 4.0 x 2.1mm)
Shielded Power Inductors TL- 42SG Series (4. x 4. x 2.1mm) FEATURES Low DCR and excellent current handling 4. x 4. mm footprint; 2.1 mm maximum height Operating temperature range: 4 C to +125 C with Irms
More informationDATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) CLS Series
DATA SHEET Metal Element Current Sensing Chip Resistor (Jumper) 5% SIZE: 0805,1206 & 2512 RoHs Compliant January 19, 2017 V.5 DS-ENG-009 Page: 2 of 14 1. SCOPE 1.1 This specification is applicable to lead
More informationFMS series Metal Strip Shunt Lead Free Current Sensing Resistors
1. Features......2 2. Applications...... 2 3. Dimension and construction.. 2 4. Power Derating Curve....3 5. Rating.3 6. Part Number.. 3 7. Marking / Soldering..4 8. Reliability Performance..5 9. Packing.
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationConfigurations: Dimension (mm) B (max) A (max) Item. Inductance Range. Item ISB ~ ISB ~ ISB ~ 1000.
SMT Shielded Power s ISB3, ISB4, ISB5 Configurations: FEATURES Magnetically shielded construction. Compact and thin. Wire burst resistant due to special construction. RoHS Compliant. APPLICATION DC-DC
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More informationSafety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
More informationConfigurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
More informationPMLCAP. Polymer Multi Layer Capacitor Specification Sheet RUBYCON CORPORATION PML DIVISION. PMLCAP ST series RPR Rubycon PART No. Drawing No.
To Polymer Multi Layer Capacitor Specification Sheet Rubycon PART No. ST series Drawing No. RPR-0024 Issued Date October 15, 2008 PML DIVISION 2932, MOTOOSHIMA, MATSUKAWA-MACHI, SHIMOINA-GUN, NAGANO-KEN,
More informationProduct Dimension Recommended Solder Pad
1,45±0,2 Product Identification GMWI - 201209-1R0 M R 1 2 3 4 5 1 :Product Code 2 :Dimension Code (mm) 3 :Inductance 4 :Tolerance Code :N = ±30%,M = ±20% 5 :Code for Special Specification Product Dimension
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 GENERAL PURPOSE FOR SMARTPHONE... 5 CLASS II: HIGH DIELECTRIC CONSTANT TYPE... 6 X5R Series... 6 TEST SPEC.... 7 PACKAGE...
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More informationElectronics Corp. Multi-Layer Ceramic Capacitor. Lead-free termination is in compliance with the requirement of green plan and ROHS.
X5R, X7R Dielectrics Features A monolithic structure ensures high reliability and mechanical strength. High capacitance density. A wide range of capacitance values in standard case size. Suitable for high
More informationTEA10402V15A0 Engineering Specification
TEA10402V15A0 Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has very low
More informationWW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25R ±1%, ±5%, 2W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More informationWW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432)
WW25Q ±1%, ±5%, 1W Metal plate low ohm power chip resistors Size 2512 (6432) Current Sensing Type Automotive AEC Q200 compliant *Contents in this sheet are subject to change without prior notice. Page
More information0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
More informationResistance (R 25) Ω Ω Ω. Tolerance of R 25 M ±20% H ±25% S ±35%
Features 1. RoHS & Halogen-free compliant 2. EIA size 63,85,121 3. Suitable for reflow soldering 4. Suitable for over-current or short circuit protection 5. Agency Recognition: UL&cUL:File No.E138827 TUV:File
More information*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
More informationMULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 5/16/2016 1/12 GmbH www.freltec.com SPECIFICATION Part Number 19C 03 * 151 * A50 D * Q * T04 _ Type Size Impedance Rated Current Material Toler ance Packing
More informationMULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
More informationShielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
More information3/4W, 2010 Low Resistance Chip Resistor
1. Scope 3/4W, 2010 This specification applies to 2.5mm x 5.0mm size 3/4W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL2550 L - Where (1) (2)
More informationS SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
More informationMultilayer Ceramic Capacitors
Multilayer Ceramic Capacitors Super Low Distortion Multilayer Ceramic Capacitors, Medium-High Voltage Multilayer Ceramic Capacitors and High Reliability Application Multilayer Ceramic Capacitors are noted
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 3/21/2017 1/12 GmbH www.freltec.com SPECIFICATION Part Number 198 05 * 151 * S * Q * E02 Type Size Nominal Impedance Material Rated Current Tolera nce
More informationSuper High AUTO (SHA) Series
PART NO. SFI1206SA240-1R5J 1.1 Technology Data Symbol Value Unit Maximum allowable continuous DC voltage V DC 12 V Breakdown voltage measured Vv 24(±10%) V Maximum clamping voltage V CLAMP < 40 V Maximum
More informationM SERIES ULTRA HIGH Q CAPACITOR SPEC
FEATURES: - Ultra High-Q and low ESR - Extended working range for wireless products - Extended battery life of portable devices PART NUMBER DESCRIPTION 42 M 25 N R1 B C T Size Series Rated Voltage (VDC)
More informationMULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
More informationSMD Wire Wound Chip Inductors / NLD TYPE(For High Q)
.Features: 1.Utilizing a miniaturized winding structure. 2.These products provide higher Q characteristics than NLF Series. 3.Resin-coated surface enables excellent mounting. 4.RoHS compliant..applications:
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5
MLCC MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5 NP0 Series... 6 X7R Series... 7 TEST SPEC.... 8 PACKAGE... 10 OTHERS... 13 E Standard
More informationApplications: MCY 4C 3 B 103 K 500 C T. Two significant digits followed by no. of zeros. And R is in place of decimal point.
Description: WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire
More informationRS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
More informationSMD Side View LEDs LM2C/L7580S76/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
More informationYEAR DATE: DAY MONTH. TDK Corporation Sales. Engineering. Marketing Group. Business Group. Magnetics APPROVED CHECKED.
SPECIFICATION SPEC. No.C425NAA00007-1 DATE Sep. 9. 2015 To Xiamen Holder Electronics Co.,Ltd. CUSTOMER S PRODUCT NAME TDK S PRODUCT NAME THIN FILM INDUCTOR TFM252010ALM-MTAA Series RECEIPT CONFIRMATION
More informationINPAQ Global RF/Component Solutions
MIP P Series Specification Product Name Series Power Inductor MIP P Series Size EIAJ Multilayer Power Inductor (MIP P Series) Engineering Spec. PART NUMBER AND CHARACTERISTICS TABLE INPAQ MIP-P series
More informationEAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
More informationCHIP RESISTOR. Chip Resistors Selection Guide. General Purpose Chip Resistor. Zero Ohm Jumper Resistor. Chip Resistor Array MAX WORKING VOLTAGE
Chip Resistors Selection Guide General Purpose Chip Resistor SIZE/ mm POWER RATING MAX WORKING VOLTAGE TOLERANCE RESISTANCE RANGE 0402 1.00*0.50 0603 1.60*0.80 1/10W 0. 0805 2.00*1.25 1/8W 1 0. 1206 3.10*1.60
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationMagnetic Sealing SMD Inductor
1. Scope This Specification is applied to the Pb free high current type SMD inductor for ZLRH1270CXXXXT. 2. Part Number Code ZLRH 1270 C 330 M T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic
More informationNP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors C 0603 CG 101 J 500 P
EIA High Non-Magnetic Multilayer Ceramic Capacitors NP0 Dielectric Non-Magnetic Multilayer Ceramic Capacitors Product Features Non-Magnetism, Suitable for MRI Part Numbering C 0603 CG 101 J 500 P T 1 2
More informationSpecification SPW08F0D
Specification SPW08F0D Drawn SSC Approval Customer Approval SPW08F0D 1. Description 2. Absolute Maximum Ratings 3. Electro Optical Characteristics 4. Characteristic Diagram 5. Reliability 6. CIE Chromaticity
More informationAXIAL LEADED INDUCTORS
AXIAL LEADED INDUCTORS ISO-900 Registered OPERATING TEMP -5~+5 C (Including self-generated heat) FEATURES Extremely reliable inductors that are ideal for automatic insertion Highly efficient automated
More informationTechnical Data Sheet. Pb Free. Specification GR101 SSC. Customer. Rev. 02 January 서식번호 : SSC- QP (Rev.0.
Specification GR101 Pb Free Drawn SSC Approval Customer Approval [ Contents ] 1. Description 2. Absolute maximum ratings 3. Electro-Optical characteristics 4. Characteristic diagrams 5. Reliability result
More informationMultilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.
More informationSMD Side View LEDs LM2C/L7277SG6/TR8-T
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS
More informationCONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5 PACKAGE... 9 OTHERS...
MLCC CONTENT (MLCC) E STANDARD NUMBER... 3 STRUCTURE... 4 ORDERING CODE... 4 SUPER SMALL SIZE (EIA 01005)... 5 TEST SPEC.... 7 MLCC PACKAGE... 9 OTHERS... 13 E Standard Number E3 1.0 2.2 4.7 E6 1.0 1.5
More informationMULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
More informationACX Advanced Ceramic X
LF 2012 Series Multilayer Chip Low-Pass Filters Features Monolithic structure replacing two inductors and five capacitors. RoHS compliant Applications 0.8-6GHz wireless communication systems, including
More information25, 35, 50, 63 Vdc. RoHS Compliant. Size Code ± 0.5 ± 0.3. F to
For filtering, Bypassing and Power Supply Decoupling with Long Life Requirements Using a ruggedized construction, type HZC_V withstands a 30 G vibration test. As the main countermeasure to vibration, the
More informationRS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
More informationSMD Shielded Power Inductor. TIS8D43GS Series. Features. Applications. Dimensions
SMD Shielded Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter of portable equipment Camcorder, LCD television
More informationFrelTec GmbH. Multilayer Chip Ferrite Bead SMD
GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 4/14/2016 1/15 GmbH www.freltec.com SPECIFICATION Part Number 196 05 * 151 * S * J * E02 _ Type Size Impedance Material Tolera nce Packing Optional 196
More informationWW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free
WW12E, WW08E, WW06E ±5%, ±1% Thick film low ohm chip resistors Size 1206, 0805, 0603 RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page 1 of 7
More informationApplications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
More informationThick Film Chip Resistors (CR, CJ Series)
Thick Film hip Resistors (R, J Series) Structure and material D E Features Low Noise Nickel arrier Terminations pplication General Purpose ode Structure Material oating Glass or Epoxy Resistor RuO2 Resistor
More informationMicrowave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
More informationSMD Top View LEDs EAPL4014WA1
SMD Top View LEDs Features Top View White LEDs Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection The product itself will remain within RoHS compliant version. Description
More informationAPPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS
NO : ED-A5540 TO : APPROVED APPROVAL SHEET FOR AL. ELECTROLYTIC CAPACITORS : BY: Series Description Part No. HV series, PLEASE RETURN US ONE COPY YOUR SIGED SPECIFICATION AFTER YOU APPROVED OF IT. APPROVED
More informationACX Advanced Ceramic X
BF 1411 Series Multilayer Chip Band-Pass Filters Features Ultra small SMD type with low loss at passband and high attenuation at stop-band. RoHS compliant Applications 2.4 GHz wireless communication systems,
More informationEVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 1206 Package Chip LED (1.0mm Height) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationSPECIFICATION. 1. Scope. 2. Product Identification M T (1) (2) (3) (4) 3. Shapes and Dimensions [Dimensions in mm]
SPECIFICATION 1. Scope This specification applies to to be delivered to user. 2. Product Identification M2-160808 - 601 - T (1) (2) (3) (4) (1) Product name (2) Shapes and dimensions 160808: 1.6 x 0.8
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationAPPLICATIONS Wireless communication equipment and various types of general electronic equipment; Other electronic equipment including HDDs and ODDs.
WIRE WOUND CHIP FERRITE INDUCTORS FEATURES ature size, suitable for SMT; Using terminal electrode structure to restrain the parasitic component effect quite caused by lead; low DC resistance, high current
More informationMULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
More information1W, 1206, Low Resistance Chip Resistor (Lead free / Halogen Free)
1W, 1206, (Lead free / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation
More informationMultilayer SMD Ceramic Capacitors General Purpose Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. MLCC is made
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationWW12C, WW08C, WW06C, WW04C, WW02C. Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201
WW12C, WW08C, WW06C, WW04C, WW02C ±5%, ±1%, ±0.5% Low ohm chip resistors ( power ) Size 1206, 0805, 0603, 0402, 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 8 ASC_WWxxC_V05
More informationPOE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1
SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =
More informationSpecification of V-PORT XXXX-X-V05 Series
1 Scope Specification of V-PORT-0402 -XXXX-X-V05 Series This specification is applied to ESD and EMI protection for I/O port, for example, VGA, US etc. The customer designed part number drawing take precedence
More informationPRODUCT SPECIFICATION 1 SCOPE APPLICABLE STANDARDS CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..
1 of 1 A Table of Contents: 1 SCOPE.. 3 2 APPLICABLE STANDARDS..... 3 3 CATALOG NO. STRUCTURE..3 4 CONNECTOR SHAPE, DIMENSIONS AND MARTERIALS..3 5 ACCOMMOD CONDUCTORS (CIC).....3 6 PACKAGING CONDITION........3
More informationFERRITE CHIP BEADS SHAPE AND DIMENSIONS FEATURES APPLICATIONS ORDERING CODE CBY
FEITE CHIP BEADS OPEAATING TEMP. -4 +85 FEATUES Excellent solderability and high heat resistance for either reflow or wave soldering. No lead, ideal for SMT. Monotilithic inorganic material construction
More informationMULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
More informationSMD Side View LEDs EAPL3810A17
Features Side view white LED. White SMT package. Lead frame package with individual 2 pins. Wide viewing angle Soldering methods: IR reflow soldering Pb-free ESD protection. The product itself will remain
More information