DIGITAL PRINT MEDIA OVERLAMINATES MOUNTING FILMS
|
|
- Alison Charles
- 6 years ago
- Views:
Transcription
1 DIGITAL PRINT MEDIA OVERLAMINATES MOUNTING FILMS S E L E T I O N G U I D E
2 SERIES PRODUT DESRIPTION PART # SIZE ADHESIVE INK TYPE mil - Matte White Vinyl - 5yr HTAP 3.4 mil - Matte White Vinyl - 5yr lear High-Tack Permanent Adhesive (British Standard BS Section 2 & 3 ertified) 201HTAP HTAP-60 MATTE WHITES OAP mil - Matte White Opaque Vinyl - 5yr Grey Permanent Adhesive 3.4 mil - Matte White Vinyl - 1yr lear Low-Tack Removable Adhesive 3.2 mil - Matte White Promotional Vinyl - 2yr 80# lay oated Liner 201OAP OAP OAP S UV mil - Matte White Semi-Rigid Vinyl - 3yr 90# Tight Release Liner mil - Matte White Semi-Rigid Vinyl - 1yr lear Low-Tack Removable Adhesive 90# Tight Release Liner mil - Gloss White Vinyl - 5yr GLOSS WHITES OAP mil - Gloss White Opaque Vinyl - 5yr Grey Permanent Adhesive 3.0 mil - Gloss White Vinyl - 1yr lear Low-Tack Removable Adhesive 3.2 mil - Gloss White Promotional Vinyl - 2yr 80# lay oated Liner 203OAP OAP OAP S UV 246 NEW 2.4 mil - Gloss White Premium Vinyl - 7yr Grey Permanent Adhesive GLOSS LEARS NEW 3.0 mil - Gloss lear Vinyl - 3yr 3.0 mil - Gloss lear Vinyl - 1yr lear Low-Tack Removable Adhesive 2.4 mil - Gloss lear Premium Vinyl - 7yr
3 SERIES PRODUT DESRIPTION PART # SIZE ADHESIVE INK TYPE STATI LINGS mil - lear Static ling 7.0 mil - White Static ling "x75' 54"x75' 27"x75' 54"x75' 209 MetroMark 3.5 mil - Matte White Opaque Transit Vinyl lear Removable Adhesive 90# Layflat Printed Logo Liner "x150' 64"x150' Approved TRANSIT 275 NEW SubMark 3.5 mil - Matte White Opaque Transit Vinyl lear High-Tack Adhesive 90# Layflat Printed Logo Liner Approved "x150' mil - Matte White Translucent Vinyl - 2yr lear Removable Adhesive Taxi Top Approved mil - Matte White Floor Advertising Vinyl lear Removable Adhesive FLOOR & ARPET mil - Matte White arpet Advertising Vinyl lear High-Tack Removable Adhesive 6.0 mil - Gloss lear Laminate lear High-Tack Removable Adhesive 5.0 mil - Scratch Resistant Textured Laminate 1.5 mil lear Polyester Liner * * * * TRAFFI GRAFFI LASSIFIED BY UNDERWRITERS LABORATORIES, IN. AS TO SLIP RESISTANE ONLY 4R93 TRANSLUENTS mil - Matte White Translucent Vinyl - 5yr 3.2 mil - Matte White Translucent Vinyl - 2yr lear Removable Adhesive 6.0 mil - Matte White Translucent Vinyl - 2yr lear Removable Adhesive Taxi Top Approved WALLS WallMark 6.0 mil - Matte White Semi-Rigid Wall Vinyl lear Low-Tack Microsphere Beaded Adhesive 90# Tight Release Liner GraphiTex 7.0 mil - Matte White Polyester Wall Fabric Film lear Low-Tack Wall Adhesive
4 SERIES PRODUT DESRIPTION PART # SIZE ADHESIVE INK TYPE mil - Gloss White onformable Wrap Vinyl - 7yr Grey Permanent Adhesive (Rem. Up To 1yr) 90# Airegress Liner (AE) WRAPS mil - Gloss lear UV Wrap Laminate mil - Matte lear UV Wrap Laminate WINDOW PERFS NEW WindowMark 6.0 mil - Matte White Perforated 50/50 Film - 1yr White Face/Black Back - lear Removable Adhesive 84# Layflat with Dual Liner Technology WindowMark 6.0 mil - Matte White Perforated 70/30 Film - 1yr White Face/Black Back - lear Removable Adhesive 84# Layflat with Dual Liner Technology 2.0 mil - Optically lear UV Gloss ast Laminate - 5yr Optically 1.2 mil lear Polyester Liner *NEW SIZE G*LSE SPEIALTY ADHESIVE LEGEND PA PPA G HTAP OAP Permanent Adhesive / lear Permanent-Positionable Adhesive / Grey High-Tack Permanent Adhesive / lear Permanent Opaque Adhesive / Grey High-Tack Adhesive / lear MotoMark Matte White 4 mil GRIP Vinyl - 5yr lear High Bond *LSE Permanent Adhesive *LOW SURFAE ENERGY ** P (Punched for 15" Gerber Printers and Plotters) MotoMark Gloss lear 12 mil ARMOR UV Laminate - 5yr RPWA R LTR HTR Removable-Positionable Wall Adhesive / lear Removable Adhesive / lear ** P 15"x150' "x150' Low-Tack Removable Adhesive / lear High-Tack Removable Adhesive / lear Adhesive Type PRINTABILITY LEGEND S Solvent / Eco-Solvent L Latex UV UV urable Adhesive olor Digital Print Media for Eco-Solvent, Solvent, Latex & UV urable Inkjet Printers NOTE: All durability statements are estimated and do not constitute a written warranty. Please refer to the specific product bulletins for further information at
5 SERIES PRODUT DESRIPTION PART # SIZE ADHESIVE mil - Gloss lear PV Laminate GENERAL LAMINATES NEW 3.0 mil - Lustre lear PV Laminate VeriFone Taxi Top Solution Product Approved 3.0 mil - Matte lear PV Laminate 3.0 mil - Gloss UV lear PV Laminate - 4yr NEW 3.0 mil - Lustre UV lear PV Laminate - 4yr NEW 3.0 mil - Matte UV lear PV Laminate - 4yr FLOOR / DISPLAY / OUNTER MATS mil - Velvet/Gloss lear Polycarbonate Laminate 1.5 mil lear Polyester Liner * 5.0 mil - Scratch Resistant Textured Laminate 1.5 mil lear Polyester Liner * 6.0 mil - Gloss lear Laminate TRAFFI GRAFFI LASSIFIED BY UNDERWRITERS LABORATORIES, IN. AS TO SLIP RESISTANE ONLY 4R OPTIALLY LEARS NEW 2.0 mil - High Gloss lear Polyester Laminate Optically 1.5 mil lear Polyester Liner 1.0 mil - Transparent Optically lear Mount Film Optically 1.5 mil lear Polyester Liner 2.0 mil - Optically lear UV Gloss ast Laminate - 5yr Optically 1.2 mil lear Polyester Liner Mounting & Laminating Films
6 SERIES PRODUT DESRIPTION PART # SIZE ADHESIVE TEDLAR 108 NEW Tedlar 1.0 mil - lear Tedlar Overlaminate - 5yr SPEIALTY MOUNTING FILMS mil - White Opaque Print Mount Film White Opaque Polypropylene High Tack -Both Sides 76# Liner (Self Wound) 0.5 mil - lear Polyester Print Mount Film High Tack -Both Sides 76# Liner (Self Wound) 1.0 mil - lear Polyester Removable Print Mount Film 1-Side lear Removable Adhesive 1-Side Printed 1.2 mil - lear Polyester Liner (Self Wound) 1.0 mil - lear Polyester Removable Print Mount Film 1-Side lear Removable Adhesive 1-Side 76# Liner (Self Wound) NEW 1.0 mil - lear Polyester Removable Print Mount Film lear Permanent Adh. 1-Side mil lear Liner lear Removable Adh. 1-Side mil lear Embossed Printed Liner DRY ERASE mil - Dry Erase Gloss lear Laminate Polypropylene WRAP LAMINATES mil - Gloss lear UV Wrap Laminate 2.4 mil - Matte lear UV Wrap Laminate THIK 238 MotoMark Gloss lear 12 mil ARMOR UV Laminate - 5yr "x75' 30"x75' 54"x75' 60"x75' Mounting & Laminating Films _
DIGITAL PRINT MEDIA OVERLAMINATES MOUNTING FILMS
E L E T I O N U I D E DIITAL PRINT MEDIA OVERLAMINATE MOUNTIN FILM ERIE PRODUT DERIPTION PART # IZE ADHEIVE INK TYPE 201 3.4 mil - Matte White Vinyl - 5yr 201-30 201-54 201-60 201 - HTAP 3.4 mil - Matte
More informationDIGITAL PRINT MEDIA OVERLAMINATES MOUNTING FILMS
S E L E T I O N G U I D E DIGITAL PINT MEDIA OVELAMINATES MOUNTING FILMS Digital Print Media for Eco-Solvent, Solvent, Latex & UV urable Inkjet Printers SEIES PODUT DESIPTION PAT # SIZE ADHESIVE INK TYPE
More informationDIGITAL PRINT MEDIA OVERLAMINATES MOUNTING FILMS
S E L E T I O N U I D E DIITAL PINT MEDIA OVELAMINATES MOUNTIN FILMS Digital Print Media for Eco-Solvent, Solvent, Latex & UV urable Inkjet Printers DUABIILITY / SEIES PODUT DESIPTION EMOVABILITY PAT #
More informationBILLING RATES - FY 16/17
Design Services per hour $15.00 Internal (if printing with CB+D) per hour $22.00 Educational Affiliate per hour $30.00 External Design Services per hour $18.00 Internal (if no printing is required) per
More informationAvery Dennison LW Series Retroreflective Window Sticker Film Issued: July 2013
LW series window stickers are designed to be variable printed for use inside or outside the vehicle. Reflective permit stickers provide easy verification for authenticity. Performance: L-S-300C Table IV
More informationRetroreflective Prismatic License Plate Film
Avery Dennison L-6050 Series Issued: April 2011 Avery Dennison L-6050 Series Retroreflective sheeting is a premium quality prismatic retroreflective material designed and engineered for the production
More informationLabels Thermal Transfer Label Materials
Thermal Transfer Label Materials HellermannTyton provides a wide variety of thermal transfer label stocks to fit most industrial applications. Materials can be used in applications ranging from high heat,
More informationAO291 Issue date: Product Data FASSON Transfer Polyimide Matt White TC11 / S8088 / BG50 Wh
FASSON Transfer Polyimide Matt White TC11 / S8088 / BG50 Wh Facestock A matt white topcoated polyimide film with very high dimensional stability, heat and chemical. The high opacity white topcoat is specifically
More informationC O N T E N T S WIRE AND HARNESS ID P R O D U C T S 2 LABEL ID PRODUCTS 64 H A R D W A R E / S O F T W A R E 106 SPECIALTY PRODUCTS 128 REFERENCE
C O N T E N T S WIRE AND HARNESS ID P R O D U C T S 2 Heat Shrink/Cable Markers Performance Labels Self-Laminating Labels Pre-Printed Wire & Cable Markers LABEL ID PRODUCTS 64 Product Code Cross Reference
More informationAvery Dennison L-3050 Series Retroreflective License Plate Film September 2013 Revision 2
Avery Dennison L-3050 Series Retroreflective sheeting is a premium quality enclosed lens retroreflective material designed and engineered for the production of high quality embossed license plates. It
More informationStick-it! Calendar Pads
tick-it! Calendar Pads tick & Remove Anywhere Anytime! Choose Decals or Magnets #4 Decal #4 Magnet Area - /4" x /4" #40 Decal #40 Magnet Area - /4" X /4" ide of van /" x /4" #4 Decal #4 Magnet Area - /"
More informationColorTops Leather Coasters
Great Color Options Contemporary Look ColorTops Leather Coasters Environmentally Friendly 00% Post-Industrial Waste # /" dia. Trendy Two-Tone Look Full Grain Natural Leather Color on Top, Natural Look
More informationAvery Dennison LV-0700 Series Retroreflective Validation Decal Film Issued: July 2013
LV-0700 Series Reflective film is a quality, enclosed lens retorreflective material. LV- 0700 is ideal for vehicle tag and sticker requirements where low temperature application is desired such as for
More informationThe greater the thickness the darker the colour may appear, as less light can transfer through.
T h e s p e c i f i e r s g u i d e t o P r o d u c t s u m m a r y P r o d u c t i o n F a b r i c a t i o n S h e e t s i z e s C u s t o m s h e e t s F i n i s h e s C o l o u r s Marblo * is a cross-linked
More informationLaboratory Identification Labels, printers & software for laboratories
www.bradyeurope.com/labid Laboratory Identification s, printers & software for laboratories About BRADY Once you have worked with BRADY, our name will stick with you, (just like our labels) because BRADY
More informationAD I T YA PR I N T ER S. Printing Events Branding
AD I T YA PR I N T ER S Printing Events Branding IN TRO A team of young professional having experience of 12 years Minimum 06 teams always on the job In house design In house fabrication In house installation
More informationVenus recycling bin. Datasheet. Contract/Office. Compact Recycling Bin for Small Spaces. Colours STANDARD VERSIONS SPECIAL VERSIONS
1/5 Venus reyling bin Contrat/Offie Compat Reyling Bin for Small Spaes. Universal Contrat Bin Available in 2 apaities 15 & 22 litres for 2 & 3 wastes Made from 0,6 and 1 mm old rolled hot dip galvanized
More information135WRx-2 Direct Thermal Film
Specifications may change without notice Last update: Aug. 2016 Ref: PS-1531 (Rev. 3) S P E C I F I C A T I O N 135WRx-2 S H E E T This product specification sheet provides the detail to aid you in identifying
More informationAvery Dennison T-6500 Translucent Series Microprismatic Translucent Retroreflective Film Issued: October 2013
Avery Dennison Avery Dennison T-6500 Translucent Series reflective sheeting consists of a micro-prismatic translucent face material and has been designed for internally illuminated signs. This product
More informationWe Provide a Variety of Product Ranges Catering for an array of Usage Requirements.
We Provide a Variety of Product Ranges Catering for an array of Usage Requirements. Adhesive/FIXing Function ADSORBENT ADHESIVE SURFACE FUNCTION FUJICOPIAN's Functional Film About FIXFILM is a collective
More informationl~testimo // Purpose of Tape Analysis Tapes Maureen J. Bradley, Ph.D. Federal Bureau of Investigation Chemistry Unit ,,-
i ". i. he Forensic Analysis of Pressure Sensitive Adhesive Tapes Maureen J. Bradley, Ph.D. Federal Bureau of nvestigation Chemistry Unit! // Purpose of Tape Analysis to conclude with the greatest possible
More informationebeam Technologies Ebeam for Printing and Coating Applications Dream of Change, Beam for Change
ebeam Technologies Ebeam for Printing and Coating Applications Dream of Change, Beam for Change Innovatieve Coatings Cluster 11/30/2017 1 RF power X-Ray ebeam At a glance About COMET Leading global provider
More informationTrends in Surface Treatment for Multi-Layer Packaging
Trends in Surface Treatment for Multi-Layer Packaging Presented by Senthil Kumar C.O.O. Enercon Asia Pacific Major Presentation Topics Trends and Challenges Multi-Film Structures Wet vs. Dry Trapping on
More informationReactive Inkjet Printing. Patrick J. Smith University of Sheffield
Reactive Inkjet Printing Patrick J. Smith University of Sheffield 15 th November 2017 Sheffield Applied Inkjet Research Lab Here we are! Main Research themes Tissue engineering Reactive Inkjet Printing
More informationUSA Mexico
1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447 Mexico 1.800.231.6074 USA 001.800.426.1447
More informationPhotoinitiation, Photopolymerization, and Photocuring
Jean-Pierre Fouassier Photoinitiation, Photopolymerization, and Photocuring Fundamentals and Applications Hanser Publishers, Munich Vienna New York Hanser/Gardner Publications, Inc., Cincinnati Contents
More information3000 Residential 4000 Commercial 5000 Industrial Aluminum Fence Systems Lifetime Limited Warranty
3000 Residential 4000 Commercial 5000 Industrial Aluminum Fence Systems Lifetime Limited Warranty 3000 Series - Lifetime Limited Warranty* - Model 3131 3 Rail - With Spears Heights: 36, 42, 48 & 60 Model
More informationApplications of Neuburg Siliceous Earth in Coatings and Related Systems. We supply material for good ideas
Applications of Neuburg Siliceous Earth in Coatings and Related Systems We supply material for good ideas Contents related 1. Coatings 2. Coatings related 3. New Applications 2 Electro Deposition Paints
More informationDuPont Tedlar PVF Based Backsheets Performance comparison vis-avis PVDF and PET based backsheets
DuPont Tedlar PVF Based Backsheets Performance comparison vis-avis PVDF and PET based backsheets Backsheet Deemed Most Critical Material to Protect Solar Module Most Critical Component Crystalline Silicone
More informationSynolite 1408-P-1. Product data. DSM Composite Resins
Synolite 8-P- Chemical/physical nature Synolite 8-P- is a low viscous, pre-accelerated, promoted, thixotropic, medium reactive unsaturated polyester resin based on orthophthalic acid. An LSE additive and
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More informationChoice Jade Photography
PRODUCT CATALOG Choice Jade Photography fresh. heartfelt. timeless 2016 crafting memories that last CONTENTS 01 Signature Albums 02 Memory Albums 01 02 05 03 Matted Folios & Folio Albums 04 Lagniappe Canvases
More informationStandard Glossary of Food Contact Material Inks and Coatings Terms
1 Standard Glossary of Food Contact Material Inks and Coatings Terms Acrylic binder Additive Basecoat Binder/ Vehicle Non-reactive Styrene-acrylate-copolymers or pure acrylate polymers as a resin solution
More informationRosin resin dispersions for the package printing industry
Rosin resin dispersions for the package printing industry Dr. M. Eva Ramos 1 Masami Aihara 1, Tony Dallavia 2, Wietze Bakker 3, John Hazen 3, Anton de Krom 1, David Bainbridge 2 1 Lawter BVBA, Kallo, Belgium
More information1 /square Intermittent temperature range -250 C to 150 C (-420 F to 300 F) Continuous temperature range -250 C to 120 C (-420 F to 250 F)
PRODUCT BULLETIN Aluminum Coated (Two Sides) PET Aluminum PET Aluminum MLI MATERIALS Sheldahl Brand Materials of Polyethylene Terephthalate (PET or polyester) films that are aluminized on both sides can
More informationCationic UV Curing Speeding up reactivity 15x with Curalite
Cationic UV Curing Speeding up reactivity 15x with Curalite European Coatings Show, April 5 th 2017 Presented by David Engberg Introduction Background MSc. In Chemical Engineering at the Faculty of Engineering
More informationUnderlayment. bonded impact sound insulation
Schlüter -DITRA-SOUND Underlayment 6.3 bonded impact sound insulation Product data sheet Application and Function Schlüter -DITRA-SOUND is a bonded impact sound insulation for tile coverings, made of a
More informationThinking about Ink: Composition, History, and Uses
Thinking about Ink: Composition, History, and Uses Basic Components Colorants Varnishes History Wavelength and Color Dyes and Pigments Chromophores Conditions for Color Drying Component Resin Solvent Additives
More informationLecture No. (1) Introduction of Polymers
Lecture No. (1) Introduction of Polymers Polymer Structure Polymers are found in nature as proteins, cellulose, silk or synthesized like polyethylene, polystyrene and nylon. Some natural polymers can also
More information1. Electrostatic Lab [1]
1. Electrostatic Lab [1] Purpose: To determine the charge and charge distribution on insulators charged by the triboelectric effects and conductors charged by an Electrostatic Voltage Source. Equipment:
More informationVolume # 7 Issue # 8 August 2015 Rs.5/- Volume # 7 Issue # 8 August-September 2015 INTERNATIONAL.
Rs.5/- Volume # 7 Issue # 8 August 2015 Rs.5/- Volume # 7 Issue # 8 August-September 2015 INTERNATIONAL www.eqmaglive.com www.eqmaglive.com Materials Matter For Reliable Performance And Power Output Of
More informationUSE OF RHEOLOGY AS A DEVELOPING AND TROUBLESHOOTING TOOL FOR PSA APPLICATIONS.
USE OF RHEOLOGY AS A DEVELOPING AND TROUBLESHOOTING TOOL FOR PSA APPLICATIONS. Michael DeFrancisis, Applications Engineer, Henkel, Bridgewater, NJ Yayun Liu, Senior Development Scientist, Henkel, Bridgewater,
More information3000 Residential 4000 Commercial Aluminum Fence Systems Lifetime Limited Warranty
3000 Residential 4000 Commercial Aluminum Fence Systems Lifetime Limited Warranty 3000 Series - Lifetime Limited Warranty - w/triad Finial 36 and 42 Heights Not Available 36 and 42 Heights Not Available
More informationCE 320 Structures Laboratory 1 Flexure Fall 2006
CE 320 Structures Laboratory 1 Flexure Fall 2006 General Note: All structures labs are to be conducted by teams of no more than four students. Teams are expected to meet to decide on an experimental design
More informationCOMPARISON OF QUANTITATIVE HIGH TEMPERATURE TESTING METHODS FOR SILICONE PRESSURE SENSITIVE ADHESIVES
COMPARISON OF QUANTITATIVE HIGH TEMPERATURE TESTING METHODS FOR SILICONE PRESSURE SENSITIVE ADHESIVES Elizabeth Kelley, Senior Chemist, The Dow Chemical Company, Midland, MI Timothy Mitchell, Associate
More informationWhite Paper Adhesives Sealants Tapes
Fundamental principles of UV reactive manufacturing processes Introduction While the UV systems technology and the appropriate chemistry have been developing continuously, the principle of irradiation
More informationCREATING TOMORROW S SOLUTIONS HEAT-SEALABLE COATINGS I PRINTING INKS I INDUSTRIAL COATINGS VINNOL SURFACE COATING RESINS PRODUCT OVERVIEW
CREATING TOMORROW S SOLUTIONS HEAT-SEALABLE COATINGS I PRINTING INKS I INDUSTRIAL COATINGS VINNOL SURFACE COATING RESINS PRODUCT OVERVIEW 1 Viscosity Flexibility Thermal-activation temperature Solubility
More informationPackaging design and cationic curing materials
Packaging design and cationic curing materials 22 nd March 2016 Presented by Paul Kelly Introduction Background 35 years in Radiation Cured coatings and Inks since 1981 Speaker, Paul Kelly Technical Development
More informationVINNOL SURFACE COATING RESINS PRODUCT OVERVIEW
SURFACE COATING RESINS PRODUCT OVERVIEW WACKER markets vinyl chloride copolymers and terpolymers under the trade name surface coating resins. The product range currently contains surface coating resins
More informationAssoc. Prof. Dr. Ruta MINIOTAITE
KAUNAS UNIVERSITY OF TECHNOLOGY, LITHUANIA VAPOUR PERMEABILITY AND WATER ABSORPTION OF DIFFERENT EXTERIOR PAINT SYSTEMS Assoc. Prof. Dr. Ruta MINIOTAITE Increasing focus on the durability aspects of buildings
More informationJune SHEET PRODUCTS Die Cut Product Guide
June 2015 SHEET PRODUCTS Die Cut Product Guide -./01&+20&$34&5167384/!"#$"#%&'()%&*##+,&-*./)+#&"-0"&1(/)2#3&%#4+'524+#&24$#%-4/,&(%&,24//&6)4*$-$-#,&7(%&.),$(2& (%+#%&,8#.-4/$'&8%(+).$,3&!4),4)&9(4$#+&:%(+).$,&-,&'()%&,()%.#&7(%&,)8#%-(%&6)4/-$'&4*+&.(,$&
More informationCHARACTERISTICS OF DRY FRICTION & PROBLEMS INVOLVING DRY FRICTION
CHARACTERISTICS OF DRY FRICTION & PROBLEMS INVOLVING DRY FRICTION Today s Objective: Students will be able to: a) Understand the characteristics of dry friction. b) Draw a FBD including friction. c) Solve
More informationPOLYFLUOR Fabric Protector (PFOS & PFOA free)
POLYFLUOR Fabric Protector (PFOS & PFOA free) imagine! Resins Grade BS BS 3901 SR NI 3918 3936 Description emulsion emulsion solution Solids 30% 30% 20% 20% 15% 20% Ionicity Cationic Cationic - Non ionic
More information8.6 Product data sheet
Schlüter -KERDI-SHOWER Drainage floor level showers 8.6 Product data sheet Application and Function Schlüter -KERDI-SHOWER is a modular system for the construction of floor level showers with ceramic tiles.
More information2D Patterns MODULAR & EASY-TO-INSTALL. turf.design 844 TURF OMG. pat e n t pending
Adhesive Tile by 2D Patterns MODULAR & EASY-TO-INSTALL Glass walls, concrete floors, and exposed ceilings are the leading cause of poor office acoustics. Most offices want an open office feel, but often
More informationPRODUCT DATA SHEET TYPICAL NEAT RESIN PROPERTIES. Outgassing (TML) % Outgassing (CVCM) % Density g/cc
PRODUCT TYPE 225-250 F (107-121 C) Cure Toughened Cyanate Ester TYPICAL APPLICATIONS High Dimensional Stability Space Structures Optical Benches Reflectors Radomes and Antennae Low Observables Radar Transparent
More informationInstrumental Technique: Cuvette. Md Rabiul Islam
Instrumental Technique: Cuvette Md Rabiul Islam 16-7-2016 What is cuvette? A cuvette is a small tube of circular or square cross section, sealed at one end, made of plastic, glass, or fused quartz (for
More informationTechnical Information ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A. Neoprene Sheets...
Technical Information 2011.1 ADVANCED MATERIALS TABLE OF CONTENTS: Thermally Cond. Insu. Caps & Tubes section A A Insulation Garfilm... section B B Insulation Nomex Films... section C Neoprene Sheets...
More informationEffects of Resin and Fabric Structure
Fatigue of Wind Blade Laminates: Effects of Resin and Fabric Structure Details David Miller, Daniel D. Samborsky and John F. Mandell Montana State t University it MCARE 2012 Outline Overview of MSU Fatigue
More informationAnupam Chemicals.
+91-8048106520 Anupam Chemicals https://www.indiamart.com/anupamchemicals/ We are amongst the reputed Trader and Supplier of a wide range of New Items, Textile Auxiliaries, Lightening Arrestors, Paint
More informationDigital Printing Compatibility Matrix
Digital Printing Compatibility Matrix This Digital Printing Compatibility Matrix is designed to help end users identify the suitable Teslin substrate grade for their equipment. The information is based
More informationRIGID PVC CONDUIT FITTINGS AND ACCESSORIES
AND ACCESSORIES APPLICATIONS Utilities Cable, data and communication lines Institutional, commercial, industrial buildings Residential applications, service entrances Street and highway underground feeds
More informationCALENDERING AND REELING
UNIVERSITY OF VICTORIA MECH 450D PULP AND PAPER TECHNOLOGY CALENDERING AND REELING 1 Introduction After the dryer, paper passes through a calender stack and then is wound into a reel of paper as shown
More informationPigment Particle Size Using Microtrac Laser Technology
Pigment Particle Size Using Microtrac Laser Technology Philip E. Plantz, PhD Application Note SL-AN-30 Revision A Provided By: Microtrac, Inc. Particle Size Measuring Instrumentation Introduction Since
More informationACRIFIX. Adhesives and Auxiliaries
ACRIFIX Adhesives and Auxiliaries For a perfect union PLEXIGLAS, the world s first acrylic, manufactured by our company, can be joined by a variety of methods. A distinction is made between permanent and
More informationPolymer Systems and Film Formation Mechanisms in High Solids, Powder, and UV Cure Systems
Polymer Systems and Film Formation Mechanisms in High Solids, Powder, and UV Cure Systems J. Baghdachi, Ph.D. Coatings Research Institute Eastern Michigan University (734) 487-3192 Freshpaint@aol.com jamil.baghdachi@emich.edu
More informationProperties of Matter. Section 4.2 of the textbook pp
Properties of Matter Section 4.2 of the textbook pp. 149-155 Physical Properties Physical properties are characteristics or descriptions of a substance that may be observed or measured. The substance remains
More information*These are the vinyl for MAX Bepop Cutting/printing machines. We have 100mm (4in) and 200mm(8in) width models available in North America.
The English translation of Bepop standard vinyl (indoor use) technical datasheet 100mm (4in) / 200mm (8in) width Color 100mm(4in) width 200mm(8in) width Black SL-S111N Black SL-S201N Black White SL-S112N
More informationBasic Photography Phototooling
Basic Photography in Phototooling Eric Janssens October 2005 Elementary Photography In Greek : PHOTO = LIGHT GRAFEIN = TO WRITE PHOTOGRAPHY = WRITING WITH LIGHT Elementary Photography First law of chemistry
More informationProduct ranges HOMAPAL Metal and HOMAPAL Magnetic Boards
Decor Item Description [kg/m²] Material Finish = im at 205 Slate a,b 1,0 1,3 Melamine 8 0,3 80 012 205/000U Melamine black plain matt a,b 1,0 1,3 Melamine 8 0,3 80 012 211/000U Melamine green plain matt
More informationHS-Code SS NACCS Unit 1 Unit 2 Description General WTO 1 Preferential Temp
3201 Tanning extracts of vegetable origin; tannins and their salts, ethers, esters and other derivatives: (See note 1) HS-Code SS NACCS Unit 1 Unit 2 General WTO 1 Preferential Temp 3201 Tanning extracts
More informationOutline. ECE 477 Digital Systems Senior Design Project. Module 7 Capacitor Selection Guidelines. Film Ceramic Electrolytic Miscellaneous
Module 7: Capacitor Selection Guidelines Lecture Workbook - Page 7-1 2004 by D. G. Meyer ECE 477 Digital Systems Senior Design Project Module 7 Capacitor Selection Guidelines Outline Film Ceramic Electrolytic
More informationMeasurements for the prediction of perceived product quality (MONAT)
Measurements for the prediction of perceived product quality (MONAT) Measurements for the prediction of perceived product quality (MONAT) Measurement of Naturalness EC Framework VI Project Properties for
More informationARE YOU IN THE MARKET FOR A NEW VEHICLE VEHICLE MANUFACTURERS CAN BUILD THE BEST VEHICLES IN THE WORLD BUT IF YOU DO NOT TREAT THEM THEY WILL RUST
ARE YOU IN THE MARKET FOR A NEW VEHICLE VEHICLE MANUFACTURERS CAN BUILD THE BEST VEHICLES IN THE WORLD BUT IF YOU DO NOT TREAT THEM THEY WILL RUST WELCOME TO CMC INTERNATIONAL AND OUR CAR CARE PROGRAMME
More informationMaking chemistry work for you. ISCATHIX Rheological Additives
Making chemistry work for you Rheological Additives ISCA was established in 1998 with the aim of supplying high quality speciality chemicals across a broad spectrum of industry. Our commitment to provide
More informationPASTEURIZABLE, WATER WHITENING RESISTANT EMULSION BASED PRESSURE SENSITIVE ADHESIVE
PASTEURIZABLE, WATER WHITENING RESISTANT EMULSION BASED PRESSURE SENSITIVE ADHESIVE Tibor Pemecker, Research Specialist, Solutia Inc., Springfield, MA Jong-Shing Guo, Sr. Research Specialist, Solutia Inc.,
More informationAvery Dennison Reflective Solutions 2014 PRICE GUIDE
Avery Dennison Reflective Solutions 2014 PRICE GUIDE Roads & Highways Work Zone Vehicle Conspicuity Effective AUGUST 1, 2014 TABLE OF CONTENTS GENERAL INFORMATION Ordering Information Reflective Products...2-3
More informationGB/T / ISO 527-1:1993
Translated English of Chinese Standard: GB/T1040.1-2006 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 83.080.01 G 31 GB/T 1040.1-2006 / ISO
More information3.5(H)mm, 2mm-travel Type
Swith (H)mm, mm-travel Type SSSS Series Exellent appliation for designing ompat and high density portable devies. Detetor Typial Speifiations Items Rating/min. Resistive load Contat resistane Initial performane/fter
More informationPhotoinitiators. For cationic UV curing processes.
Photoinitiators For cationic UV curing processes. / Cationic Photoinitiators from Deuteron: Benzene-free, low odour, rapid curing speed. The cationic photo-initiated polymerisation of epoxides and oxetanes
More informationSynonymous with style and durability.
L U X U R Y V i n y l P l a n k V i n y l P l a n k Synonymous with style and durability. Elegantly designed and expertly constructed, Godfrey Hirst Luxury Vinyl Plank redefines vinyl flooring for the
More informationElectronic materials and components-polymer types
Introduction Electronic materials and components-polymer types Polymer science is a broad field that includes many types of materials which incorporate long chain structures with many repeated units. One
More informationADDITIVES. HIGH SOLIDS AND WATER- BORNE COATINGS Werner J. Blank Rudy Berndlmaier & Dan Miller King Industries Inc.
You are now at www.wernerblank.com HOME NEWS PUBLICATIONS LECTURES PATENTS DOWNLOADS ADDITIVES FOR HIGH SOLIDS AND WATER- BORNE COATINGS Werner J. Blank Rudy Berndlmaier & Dan Miller King Industries Inc.
More informationVCOG OVERVIEW MODELS. 1-6x24 (with Thumb Screw Mount) 1-6x24 (with Quick Release Mount)
OPTICS CATALOG OVERVIEW The Trijicon VCOG (Variable Combat Optical Gunsight) is a rugged variable powered riflescope with an LED illuminated first focal plane BDC reticle. The VCOG is designed for extreme
More informationIntroduction to the Basics of UV/EB Chemistry and Formulations
Introduction to the Basics of UV/EB Chemistry and Formulations SUNY ESF Radiation Curing Program RadTech NA Dr. Mike J. Idacavage Colorado Photopolymer Solutions September 9, 2015 Agenda Introduction to
More information21 June 2018 Dr. Stephan Padlewski, Marketing Leader, EMEA DuPont Photovoltaic Solutions Photovoltaic Solutions
DuPont Photovoltaic Solutions Risk mitigation strategies for solar assets by climate type and application sensitivity Introducing innovation for bifacial c-si panels 21 June 2018 Dr. Stephan Padlewski,
More information3. The provisions of this rule shall become effective on December 1, 1996.
VENTURA COUNTY AIR POLLUTION CONTROL DISTRICT RULE 74.19.1 - SCREEN PRINTING OPERATIONS (Adopted 6/11/96, Revised 11/11/03) A. Applicability The provisions of this rule apply to: 1. Any person who uses
More informationSheldahl Introduction
THE RED BOOK Sheldahl Introduction About Sheldahl Materials Founded in 1955 Sheldahl initially supplied a variety of laminated products to serve the military, aerospace and defense markets. Over the years
More informationAcetals, more than solvents. Expanding Chemistry 8-9 November 2017
Acetals, more than solvents Expanding Chemistry 8-9 November 2017 Acetals RANGE 2 Acetals Name Methylal Formula CH3-O-CH2-O-CH3 Ethylal CH3-CH2-O-CH2-O-CH2-CH3 Propylal CH3-CH2-CH2-O-CH2-O-CH2-CH2-CH3
More informationADVANCED POLYMER DESIGN FOR ADHESIVE TAPES
ADVANCED POLYMER DESIGN FOR ADHESIVE TAPES Thomas Christ, PhD, BASF SE, Ludwigshafen, Germany Matthias Gerst, PhD, BASF SE, Ludwigshafen, Germany Heinrich Harrer, PhD, BASF SE, Ludwigshafen, Germany Markus
More informationAccelerated Reliability and Durability Testing for Photovoltaic Materials
Accelerated Reliability and Durability Testing for Photovoltaic Materials SNEC 2016: Shanghai, China William Gambogi, Technical Fellow, DuPont Photovoltaic Solutions, USA For over 40 years our material
More informationInkjet Printed Reaction Arrays on Pigment Coated Substrates
Inkjet Printed Reaction Arrays on Pigment Coated Substrates 42 nd iarigai research conference, Helsinki, 07.09.2015 Risto Koivunen 1, Eveliina Jutila 1, Roger Bollström 2, Patrick Gane 1,2 1 Aalto University,
More informationInfluence of Surface Energy of Polymer Films on Spreading and Adhesion of UV-Flexo Inks
acta graphica 219 short communication received: 08-04-2013. accepted: 17-07-2013. Influence of Surface Energy of Polymer Films on Spreading and Adhesion of UV-Flexo Inks Authors Vyacheslav Repeta Ukrainian
More informationStandard Glossary of Packaging Inks and Coatings Terms
Standard Glossary of Packaging Inks and Coatings Terms 1 Acrylic binder Additive Basecoat Binder/ Vehicle Non-reactive Styrene-acrylate-copolymers or pure acrylate polymers as a resin solution in water
More informationNovel Isocyanate-Reactive Adhesives for Structural Wood Based Composites (LVL) ITP Forest Products Peer Review April 5-6, 2006
Novel Isocyanate-Reactive Adhesives for Structural Wood Based Composites (LVL) ITP Forest Products Peer Review April 5-6, 2006 Outline I. General Project Information II. Delamination Tests III. Mechanical
More informationFERON Solar backsheets & frontsheets. New thinking needs new thinkers
FERON Solar backsheets & frontsheets New thinking needs new thinkers FERON plant II Düren, Germany 2 Doing better what s already good Anything but superficial K nowledgeable, innovative and diligent customers
More informationBasic Principles. Fundamental principles of UV reactive manufacturing processes
Basic Principles Fundamental principles of UV reactive manufacturing processes The Basics Fundamental principles of UV reactive manufacturing processes Chemical curing While the UV systems technology and
More informationPOLYTONE P Series/Rosin Modified Phenolic Resin MPE Series/Modified Rosin Esters
POLYTONE P Series/Rosin Modified Phenolic Resin MPE Series/Modified Rosin Esters POLYOLS & POLYMERS PVT. LTD. REGD. OFFICE & WORKS -1 (VAPI): C-1/58-59, G.I.D.C. VAPI 396 195 GUJARAT STATE INDIA info@polyolsandpolymers.net
More informationUNIT 3. By: Ajay Kumar Gautam Asst. Prof. Dev Bhoomi Institute of Technology & Engineering, Dehradun
UNIT 3 By: Ajay Kumar Gautam Asst. Prof. Dev Bhoomi Institute of Technology & Engineering, Dehradun 1 Syllabus Lithography: photolithography and pattern transfer, Optical and non optical lithography, electron,
More information1
Process methodologies for temporary thin wafer handling solutions By Justin Furse, Technology Strategist, Brewer Science, Inc. Use of temporary bonding/debonding as part of thin wafer handling processes
More information