Semiconductor Thermal Resistance Standards versus Real Life. Bernie Siegal Thermal Engineering Associates, Inc.
|
|
- Beatrix Miles
- 6 years ago
- Views:
Transcription
1 Semiconductor Thermal Resistance Standards versus Real Life Bernie Siegal Thermal Engineering Associates, Inc.
2 Overview Introduction Objective Temperature vs. Thermal Current Standard Thermal Parameters Thermal Resistance Definition Environment Equivalent Circuit Standard Reference Environments Definition of Terms Mounting Surface Environmental Using Thermal Data Standards Conclusion References
3 Introduction Objective To demonstrate that semiconductor thermal measurements made according to standards do not necessarily produce parameter values that are useful in real applications.
4 Temperature vs. Thermal Temperature Usually refers to environmental temperature surrounding the packaged device Relates to temperature-variant device attributes Thermal Refers to heat flow, typically from heat generator(s) in package to outside world Deals with various heat flow paths
5 What is Thermal Resistance? Thermal Resistance - Junction to Specified Reference Point Measure of the ability of the physical structure to remove heat from the semiconductor junction to the reference point Temperature rise of the junction above a reference point per watt of continuous power Metric is C/W
6 Thermal Resistance Definition θ J R = ( T T ) J P H R Where: θ JR = Thermal Resistance, junction-to-reference, C/W T J = junction temperature, C T R = reference temperature, C P H = Power dissipation, W
7 Using Thermal Data Calculating Junction Temperature T J = T R + ( P θ ) H JR Where: T J = junction temperature, C T R = reference temperature, C P H = Power dissipation, W θ JR = Thermal Resistance, junction-to-reference, C/W
8 Using Thermal Data θ = θ + θ JA JC SA Ψ = Ψ + θ JA JT CA (heat sink) (natural convection) θ CA θ JA or Ψ JA θ JC or Ψ JT
9 Standard Test Methods Methods provide a basis for comparison of different devices housed in the same electronic package or similar devices housed in different electronic packages
10 Reference Environments Environment drastically effects the thermal performance of a component System and Board Temperature Mounting Surface k eff Air Flow Other Components Established need for standardization
11 Reference Environments θ JA θ JMA θ JB θ JC θ JL θ JX θ JR θ CA θ SA - junction-to-ambient (natural convection) - junction-to-moving air (forced convection) - junction-to-board (ring cold plate) - junction-to-case (cold plate) - junction-to-lead - junction-to-defined environment - junction-to-defined reference - case-to-ambient - sink-to-ambient
12 Junction-to-Ambient θ JA Natural Convection 1 ft 3 test chamber low emissivity material sample mounted in the center of chamber Chamber can be larger for high power dissipation Measure ambient temperature, chamber temperature
13 Still-Air Chamber - θ JA Low Emissivity Chamber Material ; Plexiglass or Cardboard 1ft 3 Volume DUT Test Board thermocouple
14 Juntion-to-Moving Air θ JMA Forced Convection Laboratory Wind Tunnel Speeds range from 0 to 1000 lfpm Laminar and turbulent air flow Orientation and air disturbances important Measurement of air speed, temperature, and pressure
15 Forced Convection- θjma 3/2/2007 MEPTEC07 15
16 Wind Tunnel Specifications Flow Uniformity Uniform to +/-5% of the mean velocity across the center 90% of the test chamber crosssection Constant within +/-5% along the length of the test section. Swirl Less than 5% of the mean flow velocity Measured with a three axis or cross wire anemometer Turbulence Less than 2% Measured with a hot wire anemometer with a frequency response of 10 khz or higher Unsteadyness Less than 5% over the time period of a typical measurement Chamber Size No more than 5% cross-section blockage Non-ducted flow Package Mounting/Orientation With respect to air flow With respect to test chamber Thermocouple mounting
17 Junction-to-Board θ JB Ring cold plate method Forces heat transfer through leads Top and bottom of package thermally isolated 2S2P PCB only Conduction model validation Board level simulation parameter Simple model for board effects
18 Ring Cold Plate 1 to 5 mm Gap Insulation to Board or Insulation to Package Junction Temperature Board Temperature Thermocouple Soldered to Middle Lead Insulate with tape if necessary Insulation Water Channel 5 mm Minimum
19 Junction-to-Case θ JC Standard being developed Must force a known amount of heat flux through the desired thermal interface Measure case temperature to compute Juction-to-Case temperature difference
20 θ JC Apparatus Heater Backing Plate Foil Heater Heater Spreader Plate Heat Flux Sensor Device Interface Plate Heat Collector Thermal Test Board & Package Flux Column Temp Sensors Cold Plate
21 Test Board Standards 2S and 2S2P SMT Leaded, SMT Area Array, Through-Hole DIL, Through-Hole Area Array Board Material, thickness, geometry Trace thickness, geometry Routing rules Nesting
22 PCB Standard Dimensions A = 76.2 mm C = 25 m m A = mm 1 B = m m A = 60.7 m m B = mm B = m h = mm h = mm 54 mm C = mm C = mm e = mm d = mm f = mm e = mm d = mm f = mm G = mm G = mm
23 Heating Curve Example 20 Heating Curve (Average) Thermal Resistance ( o C/W) m/s 2 m/s Heat Sink Still Air 0 1.0E E E E E E E E E+04 Hetaing Time (th, seconds)
24 Standards versus Real Life Standards Well-defined and simple thermal environment Easy environment temperature measurements Relatively easy junction temperature measurement Power dissipation is forced and known accurately Power dissipation is static Measurement subject is only heat source 2s or 2s2p thermal test board Real Life Not well-defined and complex thermal environment Difficult/impossible environment temperature measurements Relatively difficult junction temperature measurement Power dissipation is usually not know accurately Power dissipation is dynamic Measurement subject is one of many heat sources Package mounted on complex/manylayered printed circuit board
25 Summary Be careful when using standard thermal parametric data in real life applications
26 Application-oriented metrics Not as rigorous nor accurate as θ but useful for quick T J approximations Ψ JT Ψ JB - junction to top of case (natural convection) - junction to board (natural convection) Ψ JR = T P H J P H is the total power dissipated independent of the heat flow path
SEMICONDUCTOR THERMAL MEASUREMENT PROCEDURE
SEMICONDUCTOR TERMAL MEASUREMENT PROCEDURE The following general procedure is equally applicable to either JEDEC or SEMI thermal measurement standards for integrated circuits and thermal test die. 1. Determine
More informationComponent & Board Level Cooling.
> Component & Board Level Cooling www.resheji.com (C) Flomerics Ltd 2002 Section Title Components PCBs Packages Interface Materials Heat Sinks Thermoelectric Coolers Heat Pipes Printed Circuit Boards
More informationIntegrated Circuits Thermal Test Method Environment Conditions - Natural Convection (Still Air)
EIA/JEDEC STANDARD Integrated Circuits Thermal Test Method Environment Conditions - Natural Convection (Still Air) EIA/JESD51-2 DECEMBER 1995 ELECTRONIC INDUSTRIES ASSOCIATION ENGINEERING DEPARTMENT NOTICE
More informationan alternative approach to junction-to-case thermal resistance measurements
an alternative approach to junction-to-case thermal resistance measurements Bernie Siegal Thermal Engineering Associates, Inc. Introduction As more and more integrated circuits dissipate power at levels
More informationThermal Characterization of Packaged RFIC, Modeled vs. Measured Junction to Ambient Thermal Resistance
Thermal Characterization of Packaged RFIC, Modeled vs. Measured Junction to Ambient Thermal Resistance Steven Brinser IBM Microelectronics Abstract Thermal characterization of a semiconductor device is
More informationTEST METHOD FOR STILL- AND FORCED-AIR JUNCTION-TO- AMBIENT THERMAL RESISTANCE MEASUREMENTS OF INTEGRATED CIRCUIT PACKAGES
SEMI G38-0996 N/A SEMI 1987, 1996 TEST METHOD FOR STILL- AND FORCED-AIR JUNCTION-TO- AMBIENT THERMAL RESISTANCE MEASUREMENTS OF INTEGRATED CIRCUIT PACKAGES 1 Purpose The purpose of this test is to determine
More informationThermal Evaluation of Two Die Stacked FBGA Packages
Thermal Evaluation of Two Die Stacked FBGA Packages Krishnamoorthi. S, W.H. Zhu, C.K.Wang, H.B. Tan and Anthony Y.S. Sun Packaging Analysis and Design Center United Test and Assembly Center Ltd 5 Serangoon
More informationBoundary Condition Dependency
Boundary Condition Dependency of Junction to Case Thermal Resistance Introduction The junction to case ( ) thermal resistance of a semiconductor package is a useful and frequently utilized metric in thermal
More informationTHERMAL PERFORMANCE EVALUATION AND METHODOLOGY FOR PYRAMID STACK DIE PACKAGES
THERMAL PERFORMANCE EVALUATION AND METHODOLOGY FOR PYRAMID STACK DIE PACKAGES Krishnamoorthi.S, *W.H. Zhu, C.K.Wang, Siew Hoon Ore, H.B. Tan and Anthony Y.S. Sun. Package Analysis and Design Center United
More informationTechnical Notes. Introduction. PCB (printed circuit board) Design. Issue 1 January 2010
Technical Notes Introduction Thermal Management for LEDs Poor thermal management can lead to early LED product failure. This Technical Note discusses thermal management techniques and good system design.
More informationATS WHITE PAPER. Air Flow Measurement in Electronic Systems
ATS WHITE PAPER Air Flow Measurement in Electronic Systems Air Flow Measurement in Electronic Systems Electronic circuit boards create some of the most complex and highly three dimensional fluid flows
More informationConjugate heat transfer from an electronic module package cooled by air in a rectangular duct
Conjugate heat transfer from an electronic module package cooled by air in a rectangular duct Hideo Yoshino a, Motoo Fujii b, Xing Zhang b, Takuji Takeuchi a, and Souichi Toyomasu a a) Fujitsu Kyushu System
More informationCHAPTER 5 PACKAGE CHARACTERIZATION. Introduction. Terminology. Measurement Methods. Thermal Characterization Parameter (ψ JT ) Thermal Test Boards
CHAPTER 5 PACKAGE CHARACTERIZATION Introduction Terminology Measurement Methods Thermal Characterization Parameter (ψ JT ) Thermal Test Boards Thermal Data Reports Electrical Characterization Methodology
More informationMIL-STD-883E METHOD THERMAL CHARACTERISTICS
THERMAL CHARACTERISTICS 1. PURPOSE. The purpose of this test is to determine the thermal characteristics of microelectronic devices. This includes junction temperature, thermal resistance, case and mounting
More informationCHAPTER 6 THERMAL DESIGN CONSIDERATIONS. page. Introduction 6-2. Thermal resistance 6-2. Junction temperature 6-2. Factors affecting R th(j-a) 6-2
CHAPTER 6 THERMAL DESIGN CONSIDERATIONS page Introduction 6-2 Thermal resistance 6-2 Junction temperature 6-2 Factors affecting 6-2 Thermal resistance test methods 6-3 Test procedure 6-3 Forced air factors
More informationA Guide to Board Layout for Best Thermal Resistance for Exposed Packages
A Guide to Board Layout for Best Thermal Resistance for Exposed Packages Table of Contents 1.0 Abstract... 2 2.0 Introduction... 2 3.0 DOE of PCB (Printed Circuit Board) Design... 2 4.0 Test Methodology...
More informationHEAT TRANSFER THERMAL MANAGEMENT OF ELECTRONICS YOUNES SHABANY. C\ CRC Press W / Taylor Si Francis Group Boca Raton London New York
HEAT TRANSFER THERMAL MANAGEMENT OF ELECTRONICS YOUNES SHABANY C\ CRC Press W / Taylor Si Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group, an informa business
More informationHeat Transfer from a Single, Heated Block
Heat Transfer from a Single, Heated Block Gerald Recktenwald Portland State University Department of Mechanical Engineering gerry@me.pdx.edu May 16, 2006 These slides are a supplement to the lectures in
More informationEffective Thermal Management of Crystal IS LEDs. Biofouling Control Using UVC LEDs
Biofouling Control Using UVC LEDs OCTOBER 10, 2017 Effective Thermal Management of This application note describes the thermal management concepts and guidelines for the proper use of Crystal IS UVC LEDs.
More informationNatural and Mixed Convection Heat Transfer Cooling of Discrete Heat Sources Placed Near the Bottom on a PCB
Natural and Mixed Convection Heat Transfer Cooling of Discrete Heat Sources Placed Near the Bottom on a PCB Tapano Kumar Hotta, S P Venkateshan Abstract Steady state experiments have been conducted for
More informationMIL-STD-750D METHOD THERMAL RESISTANCE MEASUREMENTS OF GaAs MOSFET's (CONSTANT CURRENT FORWARD-BIASED GATE VOLTAGE METHOD)
TERMAL RESISTANCE MEASUREMENTS OF GaAs MOSFET's (CONSTANT CURRENT FORWARD-BIASED GATE VOLTAGE METOD) 1. Purpose. The purpose of this test method is to measure the thermal resistance of the MESFET under
More informationUnderstanding Hot-Wire Anemometry
Thermal Minutes Understanding Hot-Wire Anemometry Introduction Hot-wire anemometry is a technique for measuring the velocity of fluids, and can be used in many different fields. A hot-wire anemometer consists
More informationDLA LAND AND MARITIME COLUMBUS, OHIO TITLE MICROCIRCUIT, LINEAR, VOLTAGE REFERENCE, MONOLITHIC SILICON
REVISIONS LTR DESCRIPTION DTE PPROVED Make change to the lead finish from -01XB to -01XE. Update document paragraphs to current requirements. - ro 17-08-15 C. SFFLE Prepared in accordance with SME Y14.24
More informationLMBZ52xxBLG Series. 225 mw SOT 23 Surface Mount LESHAN RADIO COMPANY, LTD. 1/6
5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed to provide voltage regulation with minimum space requirement.
More informationA Method of Determining the Equivalent Thermal Conductivity of a Conductive Printed Wiring Board (PWB) Layer with a Quasi-Random Circular Hole Pattern
A Method of Determining the Equivalent Thermal Conductivity of a Conductive Printed Wiring Board (PWB) Layer with a Quasi-Random Circular Hole Pattern Mark A. Palie Sanders a Lockheed Martin Company P.O.
More informationPHYSICAL MECHANISM OF NATURAL CONVECTION
1 NATURAL CONVECTION In this chapter, we consider natural convection, where any fluid motion occurs by natural means such as buoyancy. The fluid motion in forced convection is quite noticeable, since a
More informationME 4/549 Lab Assignment 5: Single Block Experiment Spring 2006 due 1 June 2006
ME 4/549 Lab Assignment 5: Single Block Experiment Spring 2006 due 1 June 2006 version May 23, 2006 1 Objective The objective of the laboratory exercise is to measure the convective heat transfer coefficient
More informationDepartment of Mechanical Engineering ME 96. Free and Forced Convection Experiment. Revised: 25 April Introduction
CALIFORNIA INSTITUTE OF TECHNOLOGY Department of Mechanical Engineering ME 96 Free and Forced Convection Experiment Revised: 25 April 1994 1. Introduction The term forced convection refers to heat transport
More informationHLMP-1600, HLMP-1601, HLMP-1620, HLMP-1621 HLMP-1640, HLMP-1641, HLMP-3600, HLMP-3601 HLMP-3650, HLMP-3651, HLMP-3680, HLMP-3681
HLMP-16, HLMP-161, HLMP-162, HLMP-1621 HLMP-16, HLMP-161, HLMP-36, HLMP-361 HLMP-365, HLMP-3651, HLMP-368, HLMP-3681 T 1 3 / (5 mm), T-1 (3 mm), 5 Volt, 12 Volt, Integrated Resistor LED Lamps Data Sheet
More informationIntel Stratix 10 Thermal Modeling and Management
Intel Stratix 10 Thermal Modeling and Management Updated for Intel Quartus Prime Design Suite: 17.1 Subscribe Send Feedback Latest document on the web: PDF HTML Contents Contents 1...3 1.1 List of Abbreviations...
More informationThe Increasing Importance of the Thermal Management for Modern Electronic Packages B. Psota 1, I. Szendiuch 1
Ročník 2012 Číslo VI The Increasing Importance of the Thermal Management for Modern Electronic Packages B. Psota 1, I. Szendiuch 1 1 Department of Microelectronics, Faculty of Electrical Engineering and
More informationc. VH: Heating voltage between the collector and emitter.
TERMAL IMPEDANCE MEASUREMENTS FOR INSULATED GATE BIPOLAR TRANSISTORS (DELTA GATE-EMITTER ON VOLTAGE METOD) 1. Purpose. The purpose of this test method is to measure the thermal impedance of the IGBT under
More informationPower and Temperature
Power and Temperature TIPL 1160 TI Precision Labs Op Amps Presented by Ian Williams Prepared by Art Kay, Ian Williams and Miro Oljaca Power Dissipation Quiescent Current V IN V CC 15V - V EE -15V OPA87
More informationUnderstanding Thermal Characteristic of SOT-223 Package
Application Note Neil Nien AN044 January 2016 Understanding Thermal Characteristic of SOT-223 Package Abstract For power ICs, the thermal parameters of different packages should be compliant with different
More informationMemory Thermal Management 101
Memory Thermal Management 101 Overview With the continuing industry trends towards smaller, faster, and higher power memories, thermal management is becoming increasingly important. Not only are device
More informationAN An Analysis for Power Dissipation of LDO Application with High Power. Hawk Chen. Thermal topology of LDO: Introduction:
An Analysis for Power Dissipation of LDO Application with High Power Hawk Chen When an LDO is operating, its on-chip devices dissipate power as a heat way. Heat flow from a higher to a lower temperature
More informationThermal Management In Microelectronic Circuits
Thermal Management In Microelectronic Circuits Prakash Bhartia*, C.M., Ph.D., F.R.S.C. Natel Engineering Co., Inc. 9340 Owensmouth Avenue Chatsworth, CA 91311-6915 Phone: (818) 734-6500 www.natelengr.com
More informationStacked Chip Thermal Model Validation using Thermal Test Chips
Stacked Chip Thermal Model Validation using Thermal Test Chips Thomas Tarter Package Science Services ttarter@pkgscience.com Bernie Siegal Thermal Engineering Associates, Inc. bsiegal@thermengr.net INTRODUCTION
More informationThermal Management of SMT LED Application Note
hermal Management of SM LED Application Note Introduction o achieve reliability and optimal performance of LED Light sources a proper thermal management design is necessary. Like all electronic components,
More informationTools for Thermal Analysis: Thermal Test Chips Thomas Tarter Package Science Services LLC
Tools for Thermal Analysis: Thermal Test Chips Thomas Tarter Package Science Services LLC ttarter@pkgscience.com INTRODUCTION Irrespective of if a device gets smaller, larger, hotter or cooler, some method
More informationThermal Calculation for Linear Regulator
Linear Regulator Series Thermal Calculation for Linear Regulator The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted
More informationData Sheet. HLMP-D150 T-1 3 /4 (5 mm), T-1 (3 mm), Low Current, Double Heterojunction AlGaAs Red LED Lamps HLMP-D150/D155, HLMP-K150/K155
HLMP-D150 T-1 3 /4 (5 mm), T-1 (3 mm), Low Current, Double Heterojunction AlGaAs Red LED Lamps Data Sheet HLMP-D150/D155, HLMP-K150/K155 Description These solid state LED lamps utilize newly developed
More informationAgilent HLMP-FWxx 5mm Extra Bright Flat Top InGaN White LED Lamps. Data Sheet
Agilent HLMP-FWxx 5mm Extra Bright Flat Top InGaN White LED Lamps. Data Sheet HLMP-FW66, HLMP-FW67 Description These high intensity white LED lamps are based on InGaN material technology. A blue LED die
More informationSensors and Actuators Sensors Physics
Sensors and Actuators Sensors Physics Sander Stuijk (s.stuijk@tue.nl) Department of Electrical Engineering Electronic Systems HEMOESISIVE SENSOS (Chapter 16.3) 3 emperature sensors placement excitation
More informationThermal Measurement and Simulation of the Component Rework Profile Temperature
Thermal Measurement and Simulation of the Component Rework Profile Temperature J.T. Nurminen Oulu University of Applied Sciences, School of Engineering, Oulu, Finland janne.nurminen@osao.fi Abstract In
More informationby M. Felczak, T.Wajman and B. Więcek Technical University of Łódź, Wólczańska 211/215, Łódź, Poland
Optimization of electronic devices placement on printed circuit board Abstract by M. Felczak, T.Wajman and B. Więcek Technical University of Łódź, Wólczańska 211/215, 90-924 Łódź, Poland Power densities
More informationSuper Bright LEDs, Inc.
Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.25mm Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Forward Current I F 700 ma Reverse Voltage
More information3. LED THERMAL. a) b) 3.1. Introduction Heat transfer introduction LED ACADEMY/LED THERMAL
3. LED THERMAL 3.1. Introduction An LED is an electronic device that lights up when electricity is passed through. They are used as indicators in many devices and increasingly used for other lighting purposes
More informationUNISONIC TECHNOLOGIES CO., LTD LM78XX
UNISONIC TECHNOLOGIES CO., LTD LM78XX 3-TERMINAL 1A POSITIVE VOLTAGE REGULATOR 1 TO-220 DESCRIPTION The UTC LM78XX family is monolithic fixed voltage regulator integrated circuit. They are suitable for
More informationSpecification LR521. Drawn Approval Approval. Rev. 05 December 서식번호 : SSC-QP (Rev.00)
Specification LR521 SSC Customer Drawn Approval Approval 1. Features Contents 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color &
More informationZ-POWER LED Series. Technical Datasheet for F50380 SEOUL SEMICONDUCTOR
SEOUL SEMICONDUCTOR ZPOWER LED Series Technical Datasheet for F50380 ZPower series is designed for high current operation and high flux output applications. ZPower LED's thermal management perform exceeds
More informationCOVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING
COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING COURSE: MCE 524 DISCLAIMER The contents of this document are intended for practice and leaning purposes at the
More informationNUMERICAL SIMULATION OF CONJUGATE HEAT TRANSFER FROM MULTIPLE ELECTRONIC MODULE PACKAGES COOLED BY AIR
Proceedings of IPACK03 International Electronic Packaging Technical Conference and Exhibition July 6 11 2003 Maui Hawaii USA InterPack2003-35144 NUMERICAL SIMULATION OF CONJUGATE HEAT TRANSFER FROM MULTIPLE
More informationThermal Sensors and Actuators
Thermal Sensors and Actuators Part I Fundamentals of heat transfer Heat transfer occurs where there is a temperature gradient until an equilibrium is reached. Four major mechanism Thermal conduction Natural
More informationSpecification LR530. Drawn Approval Approval. Rev. 08 December Document No. : SSC-QP (Rev.00)
Specification LR530 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationSensing, Computing, Actuating
Sensing, Computing, Actuating Sander Stuijk (s.stuijk@tue.nl) Department of Electrical Engineering Electronic Systems HEMOESISIVE SENSOS AND LINEAIZAION (Chapter.9, 5.11) 3 Applications discharge air temperature
More informationCA3086. General Purpose NPN Transistor Array. Applications. Pinout. Ordering Information. Data Sheet August 2003 FN483.5
Data Sheet August FN8. General Purpose NPN Transistor Array The consists of five general-purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected
More informationAssessing The Thermal Performance of Building Enclosure Materials Using A Medium-Size Hot Box Chamber Summer Meeting Torkan Fazli
Assessing The Thermal Performance of Building Enclosure Materials Using A Medium-Size Hot Box Chamber 2014 Summer Meeting Torkan Fazli Introduction The building construction industry consumes significant
More informationUsing FLOTHERM and the Command Center to Exploit the Principle of Superposition
Using FLOTHERM and the Command Center to Exploit the Principle of Superposition Paul Gauché Flomerics Inc. 257 Turnpike Road, Suite 100 Southborough, MA 01772 Phone: (508) 357-2012 Fax: (508) 357-2013
More informationLMM-H04 Mass Air Flow Sensor
Hot Film Anemometer Component Highly reliable and long term stable Uni-directional airflow measurement Fast reaction time Manufactured according ISO TS16949 Can be adapted to various flow channel geometries
More informationData Sheet. HLMP-4700 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790
HLMP-4700 T-1 3 / 4 (5 mm), T-1 (3 mm), Low Current LED Lamps Data Sheet HLMP-4700, HLMP-4719, HLMP-4740 HLMP-1700, HLMP-1719, HLMP-1790 Description These tinted diffused LED lamps are designed and optimized
More informationTEST DATA ON COPPER MICRO-CHANNEL HEAT SINKS
TEST DATA ON COPPER MICRO-CHANNEL HEAT SINKS By: Ralph Webb and Hasan Nasir State College, PA 16801 www.omega.com inemi Liquid Cooling Symposium San Diego, CA May 31, 2006 Objective Test results on low
More informationAnalytical Modeling of Forced Convection in Slotted Plate Fin Heat Sinks
Analytical Modeling of Forced Convection in Slotted Plate Fin Heat Sinks P. Teertstra, J. R. Culham & M. M. Yovanovich Department of Mechanical Engineering Waterloo, Ontario, Canada http://www.mhtl.uwaterloo.ca
More informationThermal Characterization and Simulation of a fcbga-h device
Thermal Characterization and Simulation of a fcbga-h device Eric Ouyang, Weikun He, YongHyuk Jeong, MyoungSu Chae, SeonMo Gu, Gwang Kim, Billy Ahn STATS ChipPAC Inc Mentor Graphics Company Email: eric.ouyang@statschippac.com;
More informationTechnical Datasheet. Lamp LEDs are effective in hot thermal. and humid condition. This high brightness. Features
Technical Datasheet Lamp LEDs are effective in hot thermal and humid condition. This high brightness and weatherresistant packaging design makes these Lamp LEDs ideal for outdoor applications such as traffic
More informationSpecification LY521. <080924> Rev. 0.3 Document No. : SSC-QP (Rev.00) Drawn Approval Approval. Rev. 00 December
Specification LY521 SSC Customer Drawn Approval Approval 1. Features Contents 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color &
More informationNumerical Investigation of Convective Heat Transfer in Pin Fin Type Heat Sink used for Led Application by using CFD
GRD Journals- Global Research and Development Journal for Engineering Volume 1 Issue 8 July 2016 ISSN: 2455-5703 Numerical Investigation of Convective Heat Transfer in Pin Fin Type Heat Sink used for Led
More informationThermal testing of LEDs: emerging standards
Thermal testing of LEDs: emerging standards András Poppe, PhD Mentor Graphics MicReD Division, Budapest, Hungary Why to deal with thermal issues in case of LEDs? Reliability is connected to thermal issues
More informationApplication Note Thermal Design for the AWB, AWM and AWT series of Power Amplifier Modules Rev 0
Application Note Thermal Design for the AWB, AWM and AWT series of Power Amplifier Modules Rev 0 Relevant products AWT6264 AWT6283 AWM6268 AWB Series PAs General Description ANADIGICS AWB, AWM, and AWT
More informationUnderstanding Integrated Circuit Package Power Capabilities
Understanding Integrated Circuit Package Power Capabilities INTRODUCTION The short and long term reliability of s interface circuits, like any integrated circuit, is very dependent on its environmental
More informationSpecification LR530 SSC CUSTOMER. Rev. 07 January acriche.com. Document No. : SSC-QP (Rev.00)
Specification LR530 Drawn SSC Approval CUSTOMER Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationPackage Type. IXDD614PI 8-Pin DIP Tube 50 OUT 8-Lead Power SOIC with Exposed Metal Back Tube 100
IXD_64 4-Ampere Low-Side Ultrafast MOSFET Drivers Features 4A Peak Source/Sink Drive Current Wide Operating Voltage Range: 4.V to V - C to +2 C Extended Operating Temperature Range Logic Input Withstands
More informationSpecification LW514. Drawn Approval Approval. Rev. 02 December 서식번호 : SSC-QP (Rev.00)
Specification LW514 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationThermal Interface Materials (TIMs) for IC Cooling. Percy Chinoy
Thermal Interface Materials (TIMs) for IC Cooling Percy Chinoy March 19, 2008 Outline Thermal Impedance Interfacial Contact Resistance Polymer TIM Product Platforms TIM Design TIM Trends Summary 2 PARKER
More informationSpecification LY530. Drawn Approval Approval. Rev. 08 December 서식번호 : SSC-QP (Rev.00)
Specification LY530 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationMODEL NAME : LLDMWW0-15K*0*A
Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for
More informationEVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet High Power LED 1W (Preliminary)
Features Feature of the device: small package with high efficiency Typical color temperature: 3500 K. Typical view angle: 120. Typical light flux output: 33 lm @ 350mA ESD protection. Soldering methods:
More informationIntel Quark SoC X1000
Thermal and Mechanical Design Guide June 2014 Document Number: 330259-002US Legal Lines and Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR
More informationTHERMAL ANALYSIS AND OPTIMIZATION OF THERMAL PAD THICKNESS FOR TRANSISTOR MOUNTING IN FOR CPU S
ISSN Number (online): 2455-4650 THERMAL ANALYSIS AND OPTIMIZATION OF THERMAL PAD THICKNESS FOR TRANSISTOR MOUNTING IN FOR CPU S S. Balakrishnan *, M. Manikandan *Corresponding Author Department of Mechanical
More informationLecture 21: Packaging, Power, & Clock
Lecture 21: Packaging, Power, & Clock Outline Packaging Power Distribution Clock Distribution 2 Packages Package functions Electrical connection of signals and power from chip to board Little delay or
More informationChapter 9 NATURAL CONVECTION
Heat and Mass Transfer: Fundamentals & Applications Fourth Edition in SI Units Yunus A. Cengel, Afshin J. Ghajar McGraw-Hill, 2011 Chapter 9 NATURAL CONVECTION PM Dr Mazlan Abdul Wahid Universiti Teknologi
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 3-TERMINAL 1A POSITIVE VOLTAGE REGULATOR DESCRIPTION The UTC LM78XX family is monolithic fixed voltage regulator integrated circuit. They are suitable for applications that
More informationPRODUCTION DATA SHEET
The positive voltage linear regulator is configured with a fixed 3.3V output, featuring low dropout, tight line, load and thermal regulation. VOUT is controlled and predictable as UVLO and output slew
More informationSEOUL SEMICONDUCTOR CO., LTD.
SEOUL SEMICONDUCTOR ZPOWER LED Series Technical Datasheet for X92050 ZPower series is designed for high current operation and high flux output applications. Furthermore, its thermal management characteristic
More informationAgilent HLMP-CW18, HLMP-CW19, HLMP-CW28, HLMP-CW29, HLMP-CW38, HLMP-CW39 T-1 3/4 Precision Optical Performance White LED Data Sheet
Agilent HLMP-CW18, HLMP-CW19, HLMP-CW28, HLMP-CW29, HLMP-CW38, HLMP-CW39 T-1 3/4 Precision Optical Performance White LED Data Sheet Description These Super Bright Precision Optical Performance LED lamps
More informationLM35 Precision Centigrade Temperature Sensors
LM35 Precision Centigrade Temperature Sensors General Description The LM35 series are precision integrated-circuit temperature sensors, whose output voltage is linearly proportional to the Celsius (Centigrade)
More informationS-S35B-F
Specification S-S35B-F2-285-01-2-110 RoHS SETi Customer Drawn Approval Approval 1. Description Table of Contents: 2. Mechanical Dimensions 3. Characteristics of S-S35B-F2-285-01-2 4. Characteristic Diagrams
More informationLUXEON Power Light Sources
Application Brief AB05 Thermal Design Using LUXEON Power Light Sources Introduction LUXEON Power Light Sources provide the highest light output with the smallest footprint of any Light Emitting Diodes
More informationThermal Modeling of Power Devices in a Surface Mount Configuration
AN5 Thermal Modeling of Power Devices in a Surface Mount Configuration Thermal Modeling of Power Devices in a Surface Mount Configuration AN5 AN5 Introduction This Application Note demonstrates how to
More informationSpecification LW520A
Specification LW520A SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationSpecification LW514. [Preliminary] CUSTOMER SSC. Rev. 00 October Document No. : SSC-QP (Rev.00)
Specification LW514 [Preliminary] Drawn SSC Approval CUSTOMER Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline
More informationTrue temperature measurement of electronics through infrared transparent materials
True temperature measurement of electronics through infrared transparent materials by R. Lehtiniemi, C.-M. Fager and J. Rantala Nokia Research Center, P. O. Box 407, FIN-00045 NOKIA GROUP, Finland Abstract
More informationLM50 SOT-23 Single-Supply Centigrade Temperature Sensor
SOT-23 Single-Supply Centigrade Temperature Sensor General Description The LM50 is a precision integrated-circuit temperature sensor that can sense a 40 C to +125 C temperature range using a single positive
More informationTeccor brand Thyristors 0.8 Amp Sensitive SCRs
Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microamps of current as furnished by
More informationUVTOP. Specification S-T39B-B (Formerly UVTOP250TO39BL) RoHS. Drawn Approval Approval
UVTOP Specification S-T39B-B1-255-01-1-020 (Formerly UVTOP250TO39BL) RoHS SETi Customer Drawn Approval Approval 1. Description Table of Contents: 2. Mechanical Dimensions 3. Characteristics of S-T39B-B1-255-01-1-020
More informationLaplace Transform in Circuit Analysis
Laplace Transform in Circuit Analysis Laplace Transforms The Laplace transform* is a technique for analyzing linear time-invariant systems such as electrical circuits It provides an alternative functional
More informationNTC Thermistors, Accuracy Line
N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE
More informationPackage-Related Thermal Resistance of LEDs Application Note
ackage-ated Thermal esistance of LEDs Application Note Abstract This application note offers an introduction to e definition and specification of e ermal resistance value for LEDs and IEDs (I emitting
More informationHeat Transfer and Flow Simulation in PCB
Logic Fruit Technologies White Paper 806, 8 th Floor, BPTP Park Centra, Sector 30, Gurgaon. Pin: 122001 T: +91-124-4117336 W: http://www.logic-fruit.com Heat Transfer and Flow Simulation in PCB By: Sagar
More informationUncertainty Workshop: Overview of uncertainty factors in HTGHPs
Uncertainty Workshop: Overview of uncertainty factors in HTGHPs EMRP Final Stakeholder Meeting NPL, Teddington, United Kingdom 1 DIN/EU Standards for GHPs ISO 830:1991 Thermal insulation Determination
More information