Conveyor Chain Exclusive for Specific Conveyance. Conveyor Chain with Attachments for Conveying Bulk Materials
|
|
- Susanna Maxwell
- 5 years ago
- Views:
Transcription
1 Exclusive for Specific Conveyance The previous section describes that by combining with various attachments, the DK can be used for almost all general applications. This section describes the developed based on the Standard. Specialty offer improved form, size series and material advantages that suit respective applications. They can be classified into three types:, Water Treatment, and 3D Bending. with Attachments for Conveying Bulk Materials Continuous Flow and Chain for Dust Conveyor As shown in the photo, a chain with blades is operated in a powder to cause the powder to flow in the same direction as the feeding direction of the chain. This is called a Continuous Flow. The same type of chain is also used in a similar way for discharging the dust generated by various dust collectors. We manufacture 25 types of Standard with blades, two types of Block Chains with blades (.24), respectively suitable for the various properties of dusts and powders, and five chains with special cast steel blades for conveying powders likely to cause wear. The respective chains are designated as follows: Standard with blades Continuous Flow or Chain for Dust Conveyor Block Chains with blades Block Chain for Dust Conveyor Chain with special cast steel blades TA Type Drag Chain We manufacture continuous flow conveyors and dust conveyors using the above chains with blades as standard equipment. Consult us for further details.
2 (a) Continuous Flow Continuous Flow are used for our standard continuous flow conveyors. Depending on the conveyed subjects, the following three types of attachments are available. The basic chain can be either a Standard or a Strong H-type. Type of attachment Shape L For the conveyance of bulk materials such as grain like wheat and powder like cement. For the conveyance of adhesive bulk material. B For the conveyance of bulk material like cement with higher feeding efficiency than Attachment L. DK 0101S DK 1152S DK 00S DK 25S DK 32S DK 322S DK 2S DK 300S DK HM DK 75HM DK 75H2M DK 75H300M DK 100H2M DK 100H300M DK 100H0M DK 0H300M DK 0H0M DK H0M DK 0H0M Type Conveyor No. Standard Strong H type U-1 U- Roller link Roller outside Standard Heavy-duty in late dia. A K W R D L1 L2 T H.2,000 1,000 1, , ,0 2, ,000 40,000 32,000 32,000,000, ,000 51,000 2,000 2, , , , , , , , ,176 0, ,176 0, ,372, ,56 0, without attachment Attachment X Y with Attachment B with Attachment L or Note: 1. Chains marked with should not be used for the conveyance of materials causing wear and the conveyance of loads with frequently fluctuating volume
3 Shapes and Indications of Attachments For conveying highly adhesive powder. For conveying moderately adhesive powder. For conveying slightly adhesive powder on an ascending slope, or for conveying articles likely to float. For conveying highly adhesive powder containing granular material. For conveying moderately adhesive powder containing some granular material. For conveying slightly adhesive powder in a large conveyor. For conveying slightly adhesive powder containing a large amount of granular material. For a vertical or highly inclined conveyor such as Conveyor L or S. Indication 1. An attachment is indicated by a hyphen added after the symbol of tensile strength grade. However, in the case of a strong type conveyor chain, an attachment is indicated by adding a hyphen after the roller type. Example) DK1152S-K-L DK75HM-L Shape of attachment Tensile strength grade Roller type Nominal chain number Shape of attachment Roller type Nominal chain number 2. In the case of an inclined attachment, "K" is added before the attachment symbol. Example) DK1152S-A- DK75HM-KUL 3. When an attachment has a steel sheet or rib, etc. as an accessory, "1" is added at the end. Example) DK1152S-E-B1 DK75HM-KB1
4 (b) Chains for Dust Conveyor This chain is used for conveyors exclusively for carrying dust. Depending on the application, the following three types are available: 1) Roller S for low density powder with Attachment B or B1 for U and LU Type Dust Conveyors 2) Roller M for medium density powder with Attachment or KUL for DU, DU-S, LDU and LDU-S Type Dust Conveyors 3) Block Chain for highly abrasive powder with or KUL attachments for DUB, DUB-S LDUB and LDUB-S Type Dust Conveyors Select optimal chains depending on the specifications of the dust conveyors. Conveyor chains for U, LU type dust conveyor DK 1152S DK 00S DK 25S DK 32S dust conveyor U- LU- L L L L 1,000 1, ,000 32, Roller link Roller outside in late Blade Blade height dia. W R D T H X Y B B Conveyor chain for DU, DU-S, LDU-S type dust conveyors DK 1152M DK 25M dust conveyor DU-S DU-S LDU-S LDU-S DU-2S DU-2S LDU-2S LDU-2S DU-310S DU-310S LDU-310S LDU-310S 2,0 40,000 Note: 1. The blade dimensions (X, Y) can be changed upon request. Roller link Roller outside in late Blade dia. W R D T H X KUL 15.6(Y=)13.(Y=0).6(Y=)13.(Y=0) (Y=)17.0(Y=) (Y=)(Y=) 2. Ask us for delivery time (Y=)17.0(Y=) 20.0(Y=)(Y=)
5 Block Chains for DUB, DUB-S, LDUB, LDUB-S type dust conveyor Attachment Attachment KUL DK 30B1 DK 40B1 DK 40B dust conveyor LDUB-S LDUB-S LDUB-S LDUB-S LDUB-2S LDUB-2S LDUB-2S LDUB-2S LDUB-S 24 Driving Sprocket (Block Chains for dust conveyors) 30,000 40,000 40,000 Roller link W in Outer plate Block Wing (k/m) D T H TB HB X KUL Y=.0Y= Y=.0Y= Y=1.5Y=100.5Y=1.5Y= Y=27.Y= 22.3Y=27.Y= Y=27.Y= Driven Sprocket (Block Chains for dust conveyors) Dimensions No. of teeth (for single pitch) DK 30B DK 40B DK 40B Hub dimensions Chain pitch dia. Outer dia. Tooth Range of axle dia. Dp Do T Over! Range of axle dia. Over! DK 30B1 5 DK 40B DK 40B Hub dimensions D L 1 L [Type indication] DK 30B1-4 No.d For driving sprocket No. of teeth Axle hole dimension Note: 1. For the axle hole dimension, please refer to pages describing axle diameters and hub dimensions. Dimensions No. of teeth (for single pitch) DK 30B DK 40B DK 40B Hub dimensions Chain pitch dia. Outer dia. Tooth Range of axle dia. Dp Do T Over! Range of axle dia. Over! DK 30B1 5 DK 40B Hub dimensions D L 1 L [Type indication] DK 30B1-4 No.d For driven sprocket No. of teeth Axle hole dimension Note: 1. For the axle hole dimension, please refer to pages describing axle diameters and hub dimensions.
Chain Conveyors Practical Calculations
PDHonline Course M360 (1PDH) Chain Conveyors Practical Calculations (Metric and US Systems) Jurandir Primo, PE 2009 PDH Online PDH Center 5272 Meadow Estates Drive Fairfax, VA 22030-6658 Phone & Fax: 703-988-0088
More informationS u p e r T o r q u e Pd
12 S u p e r T o r q u e Pd No: S4.5M1 mm Width S Super Torque Positive Drive Belt 4.5M 4.5mm Pitch Modified Round Tooth Profile 1 1mm Pitch Length B u i l t F o r S t r e n g t h & E n d u r a n c e Super
More information+91-8048601791 S. R. Polychem http://www.srpolychem.net/ We are counted among the leading manufacturers and traders of a diverse range of Cast Basalt Bend & Refactory Materials. Along with the commendable
More informationLowPro Series TABLE TOP CHAIN & MODULAR BELT CONVEYORS. Conveyors - Pallet Handling - Aluminium Profile Machine Guarding - Special Purpose Machinery
LowPro Series TABLE TOP CHAIN & MODULAR BELT CONVEYORS Conveyors - Pallet Handling - Aluminium Profile Machine Guarding - Special Purpose Machinery LOWPRO SL SERIES TABLETOP CHAIN CONVEYORS Standard Head
More informationINPUT DATA FOR TORSIONAL VIBRATION CALCULATIONS (TVC)
INPUT DATA FOR TORSIONAL VIBRATION CALCULATIONS (TVC) (POWER UNIT FOR MARINE INSTALLATIONS) Name of Vessel / New Building No. Name of Shipyard / Yard No. Name of Owner / Shipping Company Address of Owner
More informationPULVI-MULCHER/SEEDBED MAKER INDEX. Pulvi-Mulcher. M Models & 10 4
32 M s - 7 4 & 10 4 s Effective as of 1-18 MS-881 Shown with Standard Equipment The M Series of s are the smallest units in the line-up. These units fit a niche market of seedbed preparation for the smaller
More informationPRECISION GEARS Spur Gears
Spur Gears Description Symbol Unit Equation Normal Module m n Transverse Module m t = m n Normal Pressure Angle a n degrees = 2 Transverse Pressure Angle a t degrees = a n Number of Teeth z Profile Shift
More informationSelection table for guided systems (crank driven)
Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single
More informationMECTROL CORPORATION 9 NORTHWESTERN DRIVE, SALEM, NH PHONE FAX TIMING BELT THEORY
MECTRO CORPORATION 9 NORTHWESTERN DRIVE, SAEM, NH 03079 PHONE 603-890-55 FAX 603-890-66 TIMING BET THEORY Copyright 997, 999, 00 Mectrol Corporation. All rights reserved. April 00 Timing Belt Theory Introduction
More informationSNOWPLOW ACCESSORIES. Factory Original Parts
Factory Original Parts Your WESTERN snowplow is a valuable investment. The best way to assure original equipment reliability and efficiency is to purchase only genuine Western Factory Original parts and
More informationP R E C I S I O N G E A R S Spur Gears
Spur Gears Description Symbol Unit Equation Normal Module m n Transverse Module m t = m n Normal Pressure Angle α n degrees = 2 Transverse Pressure Angle α t degrees = α n Number of Teeth z Profile Shift
More informationPresented by: Civil Engineering Academy
Presented by: Civil Engineering Academy Structural Design and Material Properties of Steel Presented by: Civil Engineering Academy Advantages 1. High strength per unit length resulting in smaller dead
More informationTIMING PULLEYS & BELTS Timing Belts and Pulleys
Timing Belts and Pulleys Z e d o1 F U1 v n1 d k1 z 1 a = Centre distance (mm) M B = Acceleration torque (Nm) t B = Acceleration time (s) d = Bore (mm) r = Density (kg/dm 3 ) M = Torque (Nm) n = RPM d k
More informationProduct Range: Series E06/Z06 "Easy Chain " Product Range: Inner Widths (Bi) in mm: 10, 16 Bending Radii (R) in mm: 018, 028, 038
E06 Z06 Product Range: Series E06/Z06 "Easy Chain " 10,5 10,5 Price Index 2 Widths 3 Bending Radii Product Range: Inner Widths (Bi) in mm: 10, 16 Bending Radii (R) in mm: 018, 028, 038 Pitch: Unsupported
More informationSNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings
Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...
More informationCat. Multi-Processors. Hydraulic Excavators. Multi-Processor/Hydraulic Excavator Compatibility. Features: Maximum Productivity.
Cat Multi-Processors Hydraulic Excavators Maximum Productivity Big challenges are reduced to small pieces, thanks to high cutting and crushing forces generated by the cross-mounted cylinder. High productivity
More informationIdentification Number
Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,
More informationZinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC
VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide
More informationC V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
More informationGATES INDUSTRIAL BELT PRODUCTS
Truflex V-s Truflex belts feature superior length stability for minimal take-up requirements. Markets/Applications Suitable for all industrial light duty applications, usually using fractional horsepower
More informationChapter 3. Experimentation and Data Acquisition
48 Chapter 3 Experimentation and Data Acquisition In order to achieve the objectives set by the present investigation as mentioned in the Section 2.5, an experimental set-up has been fabricated by mounting
More informationSIZING AND SELECTION. According to DIN 740 part 2 SIZING
SIZING SIZING AND SELECTION According to DIN 740 part 2 RW-AMERICA.COM 7 SIZING AND SELECTION SAFETY COUPLINGS ST SYMBOLS T AR = Disengagement torque of the coupling (Nm) K = Service factor T max = Maximum
More informationthe foundation of any business starts here
the foundation of any business starts here TABLE OF CONTENT The Company... 3 Electric Motors... 4 Gearboxes... 5 Automation Products... 6 Electric Components... 9 Pneumatics... 12 Hydraulics... 13 Handling
More informationNR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
More informationPolyflex JB and Micro-V Belt Drive Selection Procedures
Polyflex JB and Micro-V Belt Drive Selection Procedures How to Design Polyflex JB and Micro-V Belt Drives Note: The upcoming drive selection and engineering sections provide information for Polyflex JB
More informationStrategies for Combating Rock
Strategies for Combating Rock Tod Michael Trenchless Product Manager, Vermeer Corporation Curt Dubbin Sale Manager HDD Division, Mincon Inc. Strategies for Combating Rock This presentation is intended
More information6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW
Price quote for: 6.0 PRICE SCHEDULE - ONE WAY SNOW PLOW Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More informationBall screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-19 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationHidden Potential between the Crankshaft and Valves
318 319 Hidden Potential between the Crankshaft and Valves W U U M P I Z R W O U Z T W H N E D K U N W P O N C A L E R U I N K O P J E W L S P N Z A D F T O I From E O H the O I optimization O O A N G
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationTOTAL PRICE: See Schedule 6.0-1
R.H. snow plow, Make & Model PRICE SCHEDULE 6.0 Right Hand Snow Plow Falls One way Plows Nose height 30 Discharge height 60 Plow throat depth from vertical to deepest point 24 Plowing angle 33 Moldboard
More informationConveyor Equipment Manufacturers Association
Conveyor Equipment Manufacturers Association 567 Strand Ct., Suite, Naples, Florida 34110 Tel: (39) - 514-3441 Fax: (39) - 514-3470 Web Site: http://www.cemanet.org Belt Book, 7th Edition Errata items
More informationUniversal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks. Optional: carbide cutting edge, mushroom shoes, snow deflectors
DATA SPECIFICATION SHEET MEYER RP SERIES (ROAD PRO) Specifications RP-10 10 feet long by 36 inches tall, weight approximately 1600 lbs. Universal bumper to frame hitch for 27,000 33,000 lbs. GVWR trucks
More informationAutomated Spur Gear Designing Using MATLAB
Kalpa Publications in Engineering Volume 1, 2017, Pages 493 498 ICRISET2017. International Conference on Research and Innovations in Science, Engineering &Technology. Selected Papers in Engineering Automated
More informationR-Plus System Frontespizio_R_PlusSystem.indd 1 11/06/ :32:02
R-Plus System R-Plus System R-Plus system R-Plus system description Fig. R-Plus system R-Plus System is Rollon s series of rack & pinion driven actuators. Rollon R-Plus System series linear units are designed
More informationLesson of Mechanics and Machines done in the 5th A-M, by the teacher Pietro Calicchio. THE GEARS CYLINDRICAL STRAIGHT TEETH GEARS
MESA PROJECT Lesson of Mechanics and Machines done in the 5th A-M, 2012-2013 by the teacher Pietro Calicchio. THE GEARS To transmit high power are usually used gear wheels. In this case, the transmission
More informationCHAPTER 17 FLEXIBLE MECHANICAL ELEMENTS LECTURE NOTES DR. HAFTIRMAN
CHAPTER 17 LEXIBLE MECHANICAL ELEMENTS LECTURE NOTES DR. HATIRMAN lexible Mechanical Elements Belts Roller chains Wire rope lexible shafts lexible Mechanical Elements Belts, ropes, chains, and other similar
More informationSpur Gear Des Mach Elem Mech. Eng. Department Chulalongkorn University
Spur Gear 10330 Des Mach Elem Mech. Eng. Department Chulalongkorn University Introduction Gear Transmit power, rotation Change torque, rotational speed Change direction of rotation Friction Gear + + Slip
More informationLECTURE NOTES ENT345 MECHANICAL COMPONENTS DESIGN Lecture 6, 7 29/10/2015 SPUR AND HELICAL GEARS
LECTURE NOTES ENT345 MECHANICAL COMPONENTS DESIGN Lecture 6, 7 29/10/2015 SPUR AND HELICAL GEARS Dr. HAFTIRMAN MECHANICAL ENGINEEERING PROGRAM SCHOOL OF MECHATRONIC ENGINEERING UniMAP COPYRIGHT RESERVED
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationDial removed for clarity
8 7 4 1 18 19 15 1 9 24 21 24 29 17 14 20 21 29 23 22 3 40 22 25 2 44 41 39 2 32 12 33 13 12 31 43 42 ITEM QTY PART NO. DESCRIPTION 1 1 Back 2 1 Front 3 3 Spacer top 4 1 Pendulum hanger 5 1 Clock dial
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationSPECIALTY. T h e L o w - M a i n t e n a n c e V - B e l t A l t e r n a t i v e
2012 N e o t h a n e Specialty belt for specific types of machines and equipment. Machine Tools Appliances Computer Industry Blowers Woodworking Machines Medical Industry Part No: 5M 710 5M 5mm ( 3 16
More informationFront flange FLV. Max. [knm/stroke]
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
More informationP O W E R T R A N S M I S S I O N P R O D U C T S P R O D U C T G U I D E
P O W E R T R A N S M I S S I O N P R O D U C T S P R O D U C T G U I D E 2 0 0 7 EUROPE P O W E R T R A N S M I S S I O N P R O D U C T S P R O D U C T G U I D E E N G I N E E R E D P R O D U C T S O
More informationHelical Gears n A Textbook of Machine Design
1066 n A Textbook of Machine Design C H A P T E R 9 Helical Gears 1. Introduction.. Terms used in Helical Gears. 3. Face Width of Helical Gears. 4. Formative or Equivalent Number of Teeth for Helical Gears.
More information1 Linear feeder 2 Track 3 Cover 4 Side plate 5 Trim weight 6 Sub-structure. 8 Feeding technology afag.com
Linear feeder Track Cover Side plate Trim weight Sub-structure 8 Feeding technology 0 Linear feeder Linear feeder Linear feeder HLF-M Linear feeder HLF-P 8 Control devices PSG Accessory HLF Linear feeder
More informationTURNING DISK STEEL CHAINS: MULTIFLEX CHAINS
TUNING DISK STEEL CAINS: Series 878TA MULTIFLEX CAINS 324 327 328 331 878 TA DIVE AND IDLE DISK for sideflexing chains TANGENTIAL SPOCKETS Plain bore Ø 18.. 4 10 Ø18 C M 128 32 337 32 29 190 12789 34 38.
More informationVOLUMEC. Valve Position Indicator 5
VOLUMEC Valve Position Indicator 5 2 KRACHT CORP. 8600 S Wilkinson Way Unit A Perrysburg, OH 43551 USA P +1 419 874 1000 F +1 419 874 1006 flowmeters@krachtcorp.com www.krachtcorp.com VOLUMEC Valve Position
More informationSTUD & TRACK ROLL FORMING MACHINE
STUD & TRACK ROLL FORMING MACHINE R O L L F O R M E R S U S A I W W W. R O L L F O R M E R S - U S A. C O M Page1 Cantilevered Dual Headed 6,000 lb Decoiler Includes mandrel and stand Can accommodate 22
More informationType M4 - SON - SO - MS
9. REV. Type M - SON - SO - MS Aircaps Tank venting and water excluding aircaps. For installation on service tank air pipes. Inerted void spaces and ballast tanks In order to maintain inert gas pressure
More informationExperimental Studies on Complex Swept Rotor Blades
International Journal of Engineering Research and Technology. ISSN 974-3154 Volume 6, Number 1 (213), pp. 115-128 International Research Publication House http://www.irphouse.com Experimental Studies on
More informationStandardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H
Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for
More informationMRI Flocculation. MRI Flocculation Systems. Mix & Match for Maximum Pretreatment Control
MRI Flocculation MRI Flocculation Systems Mix & Match for Maximum Pretreatment Control MRI Flocculation P resenting MRI m a n u f a c t u r e s v e r t i c a l t u r b i n e s (s h o w n ), h o r i z o
More informationReference Only. Spec. No. JENF243G 0004G-01 P 1 / 12. Ferrite Bead Inductor BL02/BL03 Series
Spec. No. JENF243G 0004G-01 P 1 / 12 1. Scope Ferrite Bead Inductor B02/B03 Series Reference Specification This reference specification applies Ferrite Bead Inductor (Radial Type). 2. Part Numbering (Ex.)
More informationROUND LINK CHAIN - CONVEYOR APPLICATIONS IN A SUGAR MILL
Proceedings of The South African Sugar Technologists' Association June 1980 ROUND LINK CHAIN CONVEYOR APPLICATIONS IN A SUGAR MILL By D. C. M. KEIR Huletts Sugar Ltd., Amatikulu Abstract Round link chain
More informationUseful Formulas and Calculations
Drive Design Speed Ratio = rpm (faster) = PD = N rpm (slower) pd n Where: rpm = Revolutions per minute PD = Larger pitch diameter pd = Smaller pitch diameter N = Larger sprocket grooves n = Smaller sprocket
More information2D - STRIP ANCHOR LIFTING SYSTEM
2D - STRIP ANCHOR LIFTING SYSTEM WWW.TERWA.COM Terwa reserves the right to make changes to the documentation at any time Page 1 OVERVIEW LIFTING CLUTCHES AND TRANSPORT ANCHOR SA-B SA-ST SA-TTU UNIVERSAL
More informationELMO-G Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz
ELMO- Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz Selection diagram vacuum operation Selection diagram compressor operation The performance curves are valid for pumping air at 15 C at the inlet
More information12/8/2009. Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka
Prof. A.K.M.B. Rashid Department of MME BUET, Dhaka Introduction and classes of properties Case studies showing selection of the right material for the job Deformation of material under the action of a
More informationXR Series. Introduction. Design Features. Availability. Applications
Kaydon Bearings Slewing Ring Bearings Catalog 390 Introduction The consists of Kaydon cross roller bearings. They provide a high degree of stiffness and low rotational torque within a minimal envelope.
More information12/25/ :27 PM. Chapter 14. Spur and Helical Gears. Mohammad Suliman Abuhaiba, Ph.D., PE
Chapter 14 Spur and Helical Gears 1 2 The Lewis Bending Equation Equation to estimate bending stress in gear teeth in which tooth form entered into the formulation: 3 The Lewis Bending Equation Assume
More informationIdentification Number. Accuracy. Clearances. Examples of identification number. Table 3 Radial internal clearance. Table 1 Tolerances
Identiication umber Accuracy learances The identiication number example o Hex Head am Followers are shown below. Examples o identiication number Tolerances o Hex Head am Followers are shown in Table and
More informationPARTICLE SIZE ANALYSIS
PARTICLE SIZE ANALYSIS 1 SIZE SHAPE DENSITY CHARACTERIZATION OF SOLID PARTICLES 2 φ s = Let SPHERICITY, φ s Equivalent diameter, Nominal diameter Surface of a sphere of same volume as particle surface
More informationPRODUCTION LINES INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS. compliance on products shown is complete or in-progress
PRODUCTION LINES European Product Line INDIVIDUAL PRODUCTS CUSTOM SOLUTIONS compliance on products shown is complete or in-progress INDEX: Air Feeds...2 Servo Feeds...4 Straighteners...6 Stock Reels...7
More informationLinear ceiling diffuser
L-0--01e Linear ceiling diffuser Type LDD / LDDL Contents Realisation Application Safety instructions Contents Realisation Application Safety instructions Dimensions 3 Dimensions Installation Quick selection
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationAPI 11E - Specification for Pumping Units
API 11E - Specification for Pumping Units 5 Beam Pump Structure Requirements 5.1 General Requirements for beam pump structures are specified in the following sections. Only loads imposed on the structure
More informationReplacement of Grid Coupling with Bush Pin Coupling in Blower
Replacement of Grid Coupling with Bush Pin Coupling in Blower Ramees Rahman A 1, Dr S Sankar 2 Dr K S Senthil Kumar 3 P.G. Student, Department of Mechanical Engineering, NCERC, Thrissure, Kerala, India
More informationFriction of Polymer/Steel Gear Pairs
Friction of Polymer/Steel Gear Pairs Róbert KERESZTES, László ZSIDAI, Gábor KALÁCSKA, Mátyás ANDÓ and Rajmund LEFÁNTI Department of Maintenance of Machinery, Institute for Mechanical Engineering Technology
More informationNTC Thermistors, Accuracy Line
N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE
More informationServo Motor Selection Flow Chart
Servo otor Selection Flow Chart START Selection Has the machine Been Selected? YES NO Explanation etermine the size, mass, coefficient of References friction, and external forces of all the moving part
More information< < >>>>>> Elastomer Solutions for Industrial Projects <<<<<<
< < < Elastomer Solutions for Industrial Projects
More informationSample Questions for the ME328 Machine Design Final Examination Closed notes, closed book, no calculator.
Sample Questions for the ME328 Machine Design Final Examination Closed notes, closed book, no calculator. The following is from the first page of the examination. I recommend you read it before the exam.
More informationThe following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition 18.
The following pages are an excerpt from the North American Product Technical Guide, Volume 1: Direct Fastening Technical Guide, Edition. Please refer to the publication in its entirety for complete details
More informationFOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]
FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1
More informationCOMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB
COMMODITY:SURFACE MOUNT CHIP LED LAMP DEVICE NUMBER:HL-HUB35A-TRB SHEET DATE 1 2 3 4 5 6 7 CONTENTS 2002.11.19 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Initial Released TOTAL PAGE 7 Page 1 of 8 ELECTRICAL AND OPTICAL
More informationDitchWitch Trenchers. R e p l a c e m e n t P a r t s f o r. Chains. Cutting Teeth. Sprockets. Bearings. Carbide Teeth
R e p l a c e m e n t P a r t s f o r DitchWitch Trenchers Chains Cutting Teeth Sprockets Bearings Carbide Teeth Anoka, Minnesota Atlanta, Georgia Ontario, California Centralized Customer Service: 800/38-44
More informationLKT. Low Voltage Multilayer Chip Ceramic Capacitor. Capacitance and Capacitance Tolerance
Capacitance and Capacitance Tolerance Different circuit needs different capacitance and capacitance tolerance. So the selection of capacitance is depended on the need of customers. Dielectric Material
More informationData sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony
More informationCHIP FERRITE BEADS. Features. Applications. Ordering Information. Shape and Dimensions
CHIP FERRITE BEADS Features 1. Effective for suppressing noise at high frequency, from several MHz to several hundreds MHz. 2. Chip type is suited for preventing the abnormal oscillation in high frequency
More informationSPECIFICATIONS. Multi-layer Chip Ferrite Bead GZ Series Customer Part Number. [ New Released, Revised] SPEC No.: GZ110000
Sunlord Specifications for Multi-layer Chip Ferrite Bead Page 1 of 16 SPECIFICATIONS Customer Product Name Sunlord Part Number Multi-layer Chip Ferrite Bead G Series Customer Part Number [ New eleased,
More informationResin-Molded, Radial-Lead Solid Tantalum Capacitors
Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance
More informationFOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationBS-ISO helical gear fatigue life estimation and debris analysis validation
BS-ISO helical gear fatigue life estimation and debris analysis validation Muhammad Ali Khan 1, a, Dennis Cooper 2 and Andrew Starr 1 1 Extreme loading and design research group, School of Mechanical,
More informationTurning New Directions: Surprising Potential in Planetary Transmissions
256 257 Turning New Directions: Surprising Potential in Planetary Transmissions N O D H I O E A S M I O u e n l O A N G A D F J G I O J E R U I N K O P J E W L S P N Z A D F T O I Part E O H1: OPlanetary
More informationAdvantages of Variable Frequency Drive Technology for Face Conveyor and Plow Systems in Longwall Mining
Advantages of Variable Frequency Drive Technology for Face Conveyor and Plow Systems in Longwall Mining Andreas Johannes Westphalen Caterpillar Global Mining Table of Contents Abstract Abstract... 3 Introduction...
More informationPhysics 101. Hour Exam III Spring Last Name: First Name Network-ID Discussion Section: Discussion TA Name:
Physics 101. Hour Exam III Spring 2011 Last Name: First Name Network-ID Discussion Section: Discussion TA Name: Instructions Turn off your cell phone and put it away. Calculators may not be shared. Please
More informationERRATA BELT CONVEYORS FOR BULK MATERIALS, 7th edition. As of February 1, 2015
Conveyor Equipment Manufacturers Association 567 Strand Ct., Suite, Naples, Florida 34110 Tel: (39) - 514-3441 Fax: (39) - 514-3470 Web Site: http://www.cemanet.org ERRATA BELT CONVEYORS FOR BULK MATERIALS,
More informationLecture Slides. Chapter 14. Spur and Helical Gears
Lecture Slides Chapter 14 Spur and Helical Gears The McGraw-Hill Companies 2012 Chapter Outline Cantilever Beam Model of Bending Stress in Gear Tooth Fig. 14 1 Lewis Equation Lewis Equation Lewis Form
More informationNTC Disc Thermistors ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS TECHNOLOGY PERFORMANCE CHARACTERISTICS OPTIONS STANDARDIZATION
ND 03/06/09 NE 03/06/09 NV 06/09 APPLICATIONS Commodity Product: 2 families ND or NE : general purpose NV : professional Alarm and temperature measurement application Temperature regulation application
More informationInstallation instructions, accessories. Snow chains
Instruction No 30664147 Version 1.0 Part. No. Snow chains R7700468 страница 1 / 15 Equipment A0000162 R7700458 страница 2 / 15 R7700448 страница 3 / 15 INTRODUCTION Read through all of the instructions
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationDry System (Twin and DR Type Bearings) Lubricated System (Twin Type Bearings) Lubricated System (DR Type Bearings)
This data sheet interacts with PRT2 Catalogue 54-56 Hepcootion No. 3 Load Life Information The load capacity and life expectancy of Hepcootion ring slides, segments and track systems is determined by many
More informationTECHNICAL INFORMATION, ADVICE ON APPLICATIONS AND DIMENSIONING CF
, ADVICE ON APPLICATIONS AND DIMENSIONING CF1141 10-03 Via Rossini, 6 I-4040 CASIRATE D ADDA -G -Tel 0363-351 Fax 0363-355 http://www.cofil.it - E-mail cofil@cofil.it Contents PAG 1. Technical information....
More informationSwirl Diffusers Type DLA 7 and DLA 8
LTG Incorporated Swirl Diffusers Type DLA 7 and DLA 8 LTG Incorporated 1 Corporate Drive, Suite D Spartanburg, SC 93 PO Box 889, Spartanburg, SC 9 USA Tel: 86-599-63 Fax: 86-599-63 e-mail: info@ltg-inc.net
More informationIdentification The of -Lube Linear Roller Way Super MX is identified by the identification, which consists of model code, size, part code, material symbol preload symbol, classification symbol, interchangeable
More informationTHERMAL FIELD ANALYSIS IN DESIGN AND MANUFACTURING OF A PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR
THERMAL FIELD ANALYSIS IN DESIGN AND MANUFACTURING OF A PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR Petar UZUNOV 1 ABSTRACT: The modern Permanent Magnet Linear Synchronous Motors (PMLSM) has a wide range
More information