Lecture 17 February 23, 2018
|
|
- Amie Boone
- 5 years ago
- Views:
Transcription
1 Statics - TAM 20 & TAM 2 Lecture 7 ebruary 23, 208
2 Announcements Monday s lecture: watch for Piazza announcement over weekend for possible change Concept Inventory: Ungraded assessment of course knowledge Extra credit: Complete # or #2 for 0.5 out of 00 pt of final grade each, or both for.5 out of 00 pt of final grade #: Sign up at CBT (2/26-3/ M-Th) #2: (4/2-4 M-Th) 50 min appointment, should take < 30 min Upcoming deadlines: Quiz 3 (2/2-23) Sign up at CBT Monday (2/26) Mastering Engineering Tutorial 7 Tuesday (2/27) PL HW 6 Thursday (3/) WA 3 See enhanced instructions
3 Chapter 6: Structural Analysis
4 Goals and Objectives Determine the forces in members of a truss using the method of joints Determine zero-force members Determine the forces in members of a truss using the method of sections
5
6 The truss, used to support a balcony, is subjected to the loading shown. Approximate each joint as a pin and determine the force in each member. State whether the members are in tension or compression. Solution: Start by setting the entire structure into external equilibrium. Draw the BD. Equilibrium requires σ = 0 and σ M C = 0 0 : C E 0, x x x 0 : C P P 0, y 2 2 M 0 : 2aP ap ae 0. C Solving these equations gives the external reactions C 2 P P, C P P, E (2 P P ). x 2 y 2 x 2 y x
7 Next, start with a joint, draw the BD, set it into force equilibrium only, and move to the next joint. Start with joints with at least known force and -2 unknown forces. or example, start with joint A: 0 : 0, x AB 2 AD y 2 AD 0 : P 0. 2 P, 2 P P. AD AB 2 C 2 P P, C P P, E (2 P P ). x 2 y 2 x 2 Joint B: Joint C: Joint E: Joint D: only needed for check 0 : 0, x AB BC 0 : P 0. y 2 BD P, P. BC AB BD 2 0 : 2P P 0, x BC 2 CD y 2 CD 2 0 : P P (2 P P P ) 2( P P ), CD 2 2 2( P P ) (check). CD 2 0 : 0, x 2 AD 2 CD DE y 2 AD BD 2 CD 0 : 0. 2P 2( P P ) (2 P P ), DE P P 2( P P ) 0 (check)
8 Note: The checks would not have been satisfied if the external reactions had been calculated incorrectly. Note: The order in which the joints are set in equilibrium is usually arbitrary. Sometimes not all member loads are requested. If provided numerical values: P 800 lb P2 0 AB BC AD BD 2P 30 lb (C) 2 0 2( P P ) 30 lb (T) CD 2 (2 P P ) 600 lb (C) DE P 800 lb (T) P 800 lb (T) P 2 Note that, in the absence of P 2, member BD is a zero-force member
9 Determine the force in member G of the truss and state if the member is in tension or compression. Solution: Draw a free-body diagram of the entire truss 0 : 2.5 E 0, x 0 : 3 3 A E 0, y y y M 0 : 40A 4(.5) 2(2) 20(3) 0(3) 0. E Equilibrium of the entire structure requires: y x Joint E: Joint D: 0 : E 0, x 5 29 E DE x y 2 29 E Ey E E 2 y 2 0 : DE 29 E x 29 A.5 kips, E 3.5 kips, E 4.5 kips. y x y (4.5) 2.2 kips (C), E ( 2.2) ( 3.5) 7.75 kips (T). 0 : 0, x CD DE 0 : 0. y D CD D 0. DE 7.75 kips (T), Note: Member D turned out to be a zero-force member. Under what conditions would this result not be true?
10 Joint : 0 : 0, x 29 G 29 C 29 E y 29 G 29 C D 29 E 0 : 3 0. G C E G C E 2 D 29 G E D, kips (C). Note: Nine scalar equations of equilibrium were needed to obtain this answer. Might there be a shorter way?
11 Method of sections Determine external support reactions Cut the structure at a section of interest into two separate pieces and set either part into force and moment equilibrium (your cut should be such that you have no more than three unknowns) Determine equilibrium equations (e.g., moment around point of intersection of two lines) Assume all internal loads are tensile.
12 Method of sections Determine equilibrium equations (e.g., moment around point of intersection of two lines) Assume all internal loads are tensile.
13 Determine the force in member GC of the truss and state if the member is in tension or compression.
14 Determine the force in member GC of the truss and state if the member is in tension or compression
15 Determine the force in members OE, LE, LK of the Baltimore truss and state if the member is in tension or compression. Solution: Use method of sections, since cutting LK, LE, OE, and DE will separate the truss into two pieces. Note that LE is a zero-force member. Draw freebody diagram of entire structure, and set into external equilibrium: 0 : A 0, x 0 : A I , y y y M 0 : 2 a(2) 3 a(2) 4 a(5) 5 a(3) 8aI 0. A A 0, A kn, I kn. x y y x y Normally, introducing four unknowns would make the problem intractable. However, LE is a zero-force member. Set either remaining section into equilibrium. Here, there is no real preference, but the right half will be fine
16 0 : 0, x DE 2 EO KL y 2 EO y 0 : I 0, M 0 : 0(5) a( 3) 4aI 2a 0. E y KL DE EO 7.38 kn (T), 0 (zero-force), EL 3.36 kn (T), 9.75 kn (C). KL
Lecture 17 February 23, 2018
Statics - TAM 20 & TAM 2 Lecture 7 ebruary 23, 208 Announcements Monday s lecture: watch for Piazza announcement over weekend for possible change Concept Inventory: Ungraded assessment of course knowledge
More informationLecture 20. ENGR-1100 Introduction to Engineering Analysis THE METHOD OF SECTIONS
ENGR-1100 Introduction to Engineering Analysis Lecture 20 THE METHOD OF SECTIONS Today s Objectives: Students will be able to determine: 1. Forces in truss members using the method of sections. In-Class
More informationENGR-1100 Introduction to Engineering Analysis. Lecture 20
ENGR-1100 Introduction to Engineering Analysis Lecture 20 Today s Objectives: THE METHOD OF SECTIONS Students will be able to determine: 1. Forces in truss members using the method of sections. In-Class
More informationStatics - TAM 211. Lecture 14 October 19, 2018
Statics - TAM 211 Lecture 14 October 19, 2018 Announcements Students are encouraged to practice drawing FBDs, writing out equilibrium equations, and solving these by hand using your calculator. Expending
More informationSpring 2018 Lecture 28 Exam Review
Statics - TAM 210 & TAM 211 Spring 2018 Lecture 28 Exam Review Announcements Concept Inventory: Ungraded assessment of course knowledge Extra credit: Complete #1 or #2 for 0.5 out of 100 pt of final grade
More informationLecture 14 February 16, 2018
Statics - TAM 210 & TAM 211 Lecture 14 February 16, 2018 SoonTrending.com Announcements Structured office hours of working through practice problems will be held during Sunday office hours, starting Sunday
More informationStatics - TAM 211. Lecture 31. (no lecture 30) April 6, 2018 Chap 9.2
Statics - TAM 211 Lecture 31 (no lecture 30) April 6, 2018 Chap 9.2 Announcements No class Wednesday April 11 No office hours for Prof. H-W on Wednesday April 11 Upcoming deadlines: Monday (4/9) Mastering
More informationENGR-1100 Introduction to Engineering Analysis. Lecture 19
ENGR-1100 Introduction to Engineering Analysis Lecture 19 SIMPLE TRUSSES, THE METHOD OF JOINTS, & ZERO-FORCE MEMBERS Today s Objectives: Students will be able to: In-Class Activities: a) Define a simple
More informationLecture 23 March 12, 2018 Chap 7.3
Statics - TAM 210 & TAM 211 Lecture 23 March 12, 2018 Chap 7.3 Announcements Upcoming deadlines: Monday (3/12) Mastering Engineering Tutorial 9 Tuesday (3/13) PL HW 8 Quiz 5 (3/14-16) Sign up at CBTF Up
More informationPlease review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam. Signature: INSTRUCTIONS Begin each problem in the space provided
More informationPin-Jointed Frame Structures (Frameworks)
Pin-Jointed rame Structures (rameworks) 1 Pin Jointed rame Structures (rameworks) A pin-jointed frame is a structure constructed from a number of straight members connected together at their ends by frictionless
More informationEngineering Mechanics: Statics STRUCTURAL ANALYSIS. by Dr. Ibrahim A. Assakkaf SPRING 2007 ENES 110 Statics
CHAPTER Engineering Mechanics: Statics STRUCTURAL ANALYSIS College of Engineering Department of Mechanical Engineering Tenth Edition 6a by Dr. Ibrahim A. Assakkaf SPRING 2007 ENES 110 Statics Department
More informationI certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
Examination No. 2 Please review the following statement: Group Number: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam. Signature: INSTRUCTIONS Begin
More informationNAME: Section: RIN: Tuesday, May 19, :00 11:00. Problem Points Score Total 100
RENSSELAER POLYTECHNIC INSTITUTE TROY, NY FINAL EXAM INTRODUCTION TO ENGINEERING ANALYSIS (ENGR-1100) NAME: Section: RIN: Tuesday, May 19, 2015 8:00 11:00 Problem Points Score 1 20 2 20 3 20 4 20 5 20
More informationChapter 6: Structural Analysis
Chapter 6: Structural Analysis APPLICATIONS Trusses are commonly used to support a roof. For a given truss geometry and load, how can we determine the forces in the truss members and select their sizes?
More informationENT 151 STATICS. Contents. Introduction. Definition of a Truss
CHAPTER 6 Analysis ENT 151 STATICS Lecture Notes: Mohd Shukry Abdul Majid KUKUM of Structures Contents Introduction Definition of a Truss Simple Trusses Analysis of Trusses by the Method of Joints Joints
More informationSupplement: Statically Indeterminate Trusses and Frames
: Statically Indeterminate Trusses and Frames Approximate Analysis - In this supplement, we consider an approximate method of solving statically indeterminate trusses and frames subjected to lateral loads
More informationThe analysis of trusses Mehrdad Negahban (1999)
The analysis of trusses Mehrdad Negahban (1999) A truss: A truss is a structure made of two force members all pin connected to each other. The method of joints: This method uses the free-body-diagram of
More informationME Statics. Structures. Chapter 4
ME 108 - Statics Structures Chapter 4 Outline Applications Simple truss Method of joints Method of section Germany Tacoma Narrows Bridge http://video.google.com/videoplay?docid=-323172185412005564&q=bruce+lee&pl=true
More informationENGINEERING MECHANICS STATIC
Trusses Simple trusses The basic element of a truss is the triangle, three bars joined by pins at their ends, fig. a below, constitutes a rigid frame. The term rigid is used to mean noncollapsible and
More informationStatics: Lecture Notes for Sections
Chapter 6: Structural Analysis Today s Objectives: Students will be able to: a) Define a simple truss. b) Determine the forces in members of a simple truss. c) Identify zero-force members. READING QUIZ
More informationME C85 / CE C30 Midterm 1 Exam Monday October 4, 2010
Name: SID: ME C85 / CE C30 Midterm 1 Exam Monday October 4, 2010 Please 1. Read through the test before starting. 2. If you re out of space, write on back side and add a note in your solution referring
More informationENGR-1100 Introduction to Engineering Analysis. Lecture 13
ENGR-1100 Introduction to Engineering Analysis Lecture 13 EQUILIBRIUM OF A RIGID BODY & FREE-BODY DIAGRAMS Today s Objectives: Students will be able to: a) Identify support reactions, and, b) Draw a free-body
More informationENGR-1100 Introduction to Engineering Analysis. Lecture 23
ENGR-1100 Introduction to Engineering Analysis Lecture 23 Today s Objectives: Students will be able to: a) Draw the free body diagram of a frame and its members. FRAMES b) Determine the forces acting at
More informationREADING QUIZ. 2. When using the method of joints, typically equations of equilibrium are applied at every joint. A) Two B) Three C) Four D) Six
READING QUIZ 1. One of the assumptions used when analyzing a simple truss is that the members are joined together by. A) Welding B) Bolting C) Riveting D) Smooth pins E) Super glue 2. When using the method
More informationEQUATIONS OF EQUILIBRIUM & TWO- AND THREE-FORCE MEMEBERS
EQUATIONS OF EQUILIBRIUM & TWO- AND THREE-FORCE MEMEBERS Today s Objectives: Students will be able to: a) Apply equations of equilibrium to solve for unknowns, and, b) Recognize two-force members. In-Class
More informationSRSD 2093: Engineering Mechanics 2SRRI SECTION 19 ROOM 7, LEVEL 14, MENARA RAZAK
SRSD 2093: Engineering Mechanics 2SRRI SECTION 19 ROOM 7, LEVEL 14, MENARA RAZAK SIMPLE TRUSSES, THE METHOD OF JOINTS, & ZERO-FORCE MEMBERS Today s Objectives: Students will be able to: a) Define a simple
More informationCHAPTER 5 Statically Determinate Plane Trusses
CHAPTER 5 Statically Determinate Plane Trusses TYPES OF ROOF TRUSS TYPES OF ROOF TRUSS ROOF TRUSS SETUP ROOF TRUSS SETUP OBJECTIVES To determine the STABILITY and DETERMINACY of plane trusses To analyse
More informationCHAPTER 5 Statically Determinate Plane Trusses TYPES OF ROOF TRUSS
CHAPTER 5 Statically Determinate Plane Trusses TYPES OF ROOF TRUSS 1 TYPES OF ROOF TRUSS ROOF TRUSS SETUP 2 ROOF TRUSS SETUP OBJECTIVES To determine the STABILITY and DETERMINACY of plane trusses To analyse
More informationLecture 23. ENGR-1100 Introduction to Engineering Analysis FRAMES S 1
ENGR-1100 Introduction to Engineering Analysis Lecture 23 Today s Objectives: Students will be able to: a) Draw the free body diagram of a frame and its members. FRAMES b) Determine the forces acting at
More informationSIMPLE TRUSSES, THE METHOD OF JOINTS, & ZERO-FORCE MEMBERS
SIMPLE TRUSSES, THE METHOD OF JOINTS, & ZERO-FORCE MEMBERS Today s Objectives: Students will be able to: a) Define a simple truss. b) Determine the forces in members of a simple truss. c) Identify zero-force
More informationCHAPTER 5 ANALYSIS OF STRUCTURES. Expected Outcome:
CHAPTER ANALYSIS O STRUCTURES Expected Outcome: Able to analyze the equilibrium of structures made of several connected parts, using the concept of the equilibrium of a particle or of a rigid body, in
More information6.6 FRAMES AND MACHINES APPLICATIONS. Frames are commonly used to support various external loads.
6.6 FRAMES AND MACHINES APPLICATIONS Frames are commonly used to support various external loads. How is a frame different than a truss? How can you determine the forces at the joints and supports of a
More informationEQUATIONS OF EQUILIBRIUM & TWO-AND THREE-FORCE MEMEBERS
EQUATIONS OF EQUILIBRIUM & TWO-AND THREE-FORCE MEMEBERS Today s Objectives: Students will be able to: a) Apply equations of equilibrium to solve for unknowns, and, b) Recognize two-force members. READING
More informationName ME 270 Summer 2006 Examination No. 1 PROBLEM NO. 3 Given: Below is a Warren Bridge Truss. The total vertical height of the bridge is 10 feet and each triangle has a base of length, L = 8ft. Find:
More informationSTATICS VECTOR MECHANICS FOR ENGINEERS: Eleventh Edition CHAPTER. Ferdinand P. Beer E. Russell Johnston, Jr. David F. Mazurek
Eleventh E 6 Analysis CHAPTER VECTOR MECHANICS OR ENGINEERS: STATICS erdinand P. Beer E. Russell Johnston, Jr. David. Mazurek of Structures Contents Application Introduction Definition of a Truss Simple
More informationMT225 Homework 6 - Solution. Problem 1: [34] 5 ft 5 ft 5 ft A B C D. 12 kips. 10ft E F G
MT225 Homework 6 - Solution Problem 1: [34] 5 ft 5 ft 5 ft C D 10ft 12 kips E G To begin, we need to find the reaction forces at supports and E. To do so, we draw a free-body diagram of the entire structure
More informationCalculating Truss Forces. Method of Joints
Calculating Truss Forces Method of Joints Forces Compression body being squeezed Tension body being stretched Truss truss is composed of slender members joined together at their end points. They are usually
More information7 STATICALLY DETERMINATE PLANE TRUSSES
7 STATICALLY DETERMINATE PLANE TRUSSES OBJECTIVES: This chapter starts with the definition of a truss and briefly explains various types of plane truss. The determinancy and stability of a truss also will
More informationMEE224: Engineering Mechanics Lecture 4
Lecture 4: Structural Analysis Part 1: Trusses So far we have only analysed forces and moments on a single rigid body, i.e. bars. Remember that a structure is a formed by and this lecture will investigate
More informationMethod of Sections for Truss Analysis
Method of Sections for Truss Analysis Notation: (C) = shorthand for compression P = name for load or axial force vector (T) = shorthand for tension Joint Configurations (special cases to recognize for
More informationIf the solution does not follow a logical thought process, it will be assumed in error.
Please indicate your group number (If applicable) Circle Your Instructor s Name and Section: MWF 8:30-9:20 AM Prof. Kai Ming Li MWF 2:30-3:20 PM Prof. Fabio Semperlotti MWF 9:30-10:20 AM Prof. Jim Jones
More informationTruss Analysis Method of Joints. Steven Vukazich San Jose State University
Truss nalysis Method of Joints Steven Vukazich San Jose State University General Procedure for the nalysis of Simple Trusses using the Method of Joints 1. raw a Free Body iagram (FB) of the entire truss
More informationP.E. Civil Exam Review:
P.E. Civil Exam Review: Structural Analysis J.P. Mohsen Email: jpm@louisville.edu Structures Determinate Indeterminate STATICALLY DETERMINATE STATICALLY INDETERMINATE Stability and Determinacy of Trusses
More informationPlease review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam. Signature: INSTRUCTIONS Begin each problem in the space provided
More informationSTATICS. Vector Mechanics for Engineers: Statics VECTOR MECHANICS FOR ENGINEERS: Contents 9/3/2015
6 Analsis CHAPTER VECTOR MECHANICS OR ENGINEERS: STATICS erdinand P. Beer E. Russell Johnston, Jr. of Structures Lecture Notes: J. Walt Oler Texas Tech Universit Contents Introduction Definition of a Truss
More informationPlease review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
Please review the followg statement: I certify that I have not given unauthorized aid nor have I received aid the completion of this eam. Signature: INSTRUCTIONS Beg each problem the space provided on
More informationTUTORIAL SHEET 1. magnitude of P and the values of ø and θ. Ans: ø =74 0 and θ= 53 0
TUTORIAL SHEET 1 1. The rectangular platform is hinged at A and B and supported by a cable which passes over a frictionless hook at E. Knowing that the tension in the cable is 1349N, determine the moment
More informationPhysics 8 Friday, November 8, 2013
Physics 8 Friday, November 8, 2013 Turn in HW10 today. I ll put HW11 online tomorrow. Today & Monday: mainly trusses. Some beams next week. Monday reading: from Vossoughi ch5+8 (centroids + second moment
More information6.5 Cables: Concentrated Loads
6.5 ables: oncentrated Loads 6.5 ables: oncentrated Loads Procedures and Strategies, page 1 of 3 Procedures and Strategies for Solving Problems Involving ables With oncentrated Loads 1. Pass sections through
More informationOutline: Frames Machines Trusses
Outline: Frames Machines Trusses Properties and Types Zero Force Members Method of Joints Method of Sections Space Trusses 1 structures are made up of several connected parts we consider forces holding
More informationEquilibrium. Rigid Bodies VECTOR MECHANICS FOR ENGINEERS: STATICS. Eighth Edition CHAPTER. Ferdinand P. Beer E. Russell Johnston, Jr.
Eighth E 4 Equilibrium CHAPTER VECTOR MECHANICS FOR ENGINEERS: STATICS Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University of Rigid Bodies Contents Introduction
More informationChapter 3 Trusses. Member CO Free-Body Diagram. The force in CO can be obtained by using section bb. Equations of Equilibrium.
Chapter 3 Trusses Procedure for analysis 1 Free body diagram: make a decision as to how to cut or section the truss through the members where forces are to be determined. 2 Equation of equilibrium: apply
More informationAnnouncements. Trusses Method of Joints
Announcements Mountain Dew is an herbal supplement Today s Objectives Define a simple truss Trusses Method of Joints Determine the forces in members of a simple truss Identify zero-force members Class
More informationProblem d d d B C E D. 0.8d. Additional lecturebook examples 29 ME 323
Problem 9.1 Two beam segments, AC and CD, are connected together at C by a frictionless pin. Segment CD is cantilevered from a rigid support at D, and segment AC has a roller support at A. a) Determine
More informationTo show how to determine the forces in the members of a truss using the method of joints and the method of sections.
5 Chapter Objectives To show how to determine the forces in the members of a truss using the method of joints and the method of sections. To analyze the forces acting on the members of frames and machines
More informationSTATICALLY INDETERMINATE STRUCTURES
STATICALLY INDETERMINATE STRUCTURES INTRODUCTION Generally the trusses are supported on (i) a hinged support and (ii) a roller support. The reaction components of a hinged support are two (in horizontal
More informationContinuing Education Course #207 What Every Engineer Should Know About Structures Part B Statics Applications
1 of 6 Continuing Education Course #207 What Every Engineer Should Know About Structures Part B Statics Applications 1. As a practical matter, determining design loads on structural members involves several
More information0.3 m. 0.4 m. 0.3 m. A 2 kn. 0.4 m. tan γ = 7. (BC = kn) γ = Fx = BC cos θ + AC cos γ =0
Problem 6.4 etermine the aial forces in the members of the truss. kn 0.3 m 0.4 m 0.6 m 1. m Solution: irst, solve for the support reactions at and, and then use the method of joints to solve for the forces
More informationChapter 6: Structural Analysis
Chapter 6: Structural Analysis Chapter Objectives To show how to determine the forces in the members of a truss using the method of joints and the method of sections. To analyze the forces acting on the
More informationIf the solution does not follow a logical thought process, it will be assumed in error.
Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam. If I detect cheating I will write a note on my exam and raise
More informationFinal Exam - Spring
EM121 Final Exam - Spring 2011-2012 Name : Section Number : Record all your answers to the multiple choice problems (1-15) by filling in the appropriate circle. All multiple choice answers will be graded
More information1. Please complete the following short problems.
Name 1. Please complete the following short problems. For parts 1A and 1B, we will consider three M88 recovery vehicles pulling an M1 tank back onto the road as shown below. F2 F1 50 M88 #1 50 M88 #2 y
More informationt IFBE-[(-=- "Z- tj ..e:::: /1 0s6 (I :::-13N -p11 /(1 196 /If: t3 (Z3':::+ </6;+9 2 J)~ ltt 6 ~= f(3~-+-2bl.,ls2~)iij :.llrj
Na me So..., 270 Fall 2011 Problem #2 (20 points) A uniform rod AB is 6 meters long, weighs 52 N and is in static equilibrium The 52N weight, W, is depicted as acting Yo way along the length of the rod
More informationEQUILIBRIUM OF A RIGID BODY & FREE-BODY DIAGRAMS
Today s Objectives: Students will be able to: EQUILIBRIUM OF A RIGID BODY & FREE-BODY DIAGRAMS a) Identify support reactions, and, b) Draw a free-body diagram. In-Class Activities: Check Homework Reading
More informationEquilibrium Equilibrium and Trusses Trusses
Equilibrium and Trusses ENGR 221 February 17, 2003 Lecture Goals 6-4 Equilibrium in Three Dimensions 7-1 Introduction to Trusses 7-2Plane Trusses 7-3 Space Trusses 7-4 Frames and Machines Equilibrium Problem
More informationPlane Trusses Trusses
TRUSSES Plane Trusses Trusses- It is a system of uniform bars or members (of various circular section, angle section, channel section etc.) joined together at their ends by riveting or welding and constructed
More informationMechanics of Materials
Mechanics of Materials 2. Introduction Dr. Rami Zakaria References: 1. Engineering Mechanics: Statics, R.C. Hibbeler, 12 th ed, Pearson 2. Mechanics of Materials: R.C. Hibbeler, 9 th ed, Pearson 3. Mechanics
More informationChapter Objectives. Copyright 2011 Pearson Education South Asia Pte Ltd
Chapter Objectives To develop the equations of equilibrium for a rigid body. To introduce the concept of the free-body diagram for a rigid body. To show how to solve rigid-body equilibrium problems using
More informationES230 STRENGTH OF MATERIALS
ES230 STRENGTH OF MATERIALS Exam 1 Study Guide. Exam 1: Wednesday, February 8 th, in-class Updated 2/5/17 Purpose of this Guide: To thoroughly prepare students for the exact types of problems that will
More informationSTATICS. Bodies VECTOR MECHANICS FOR ENGINEERS: Ninth Edition CHAPTER. Ferdinand P. Beer E. Russell Johnston, Jr.
N E 4 Equilibrium CHAPTER VECTOR MECHANICS FOR ENGINEERS: STATICS Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University of Rigid Bodies 2010 The McGraw-Hill Companies,
More informationEngineering Mechanics: Statics in SI Units, 12e
Engineering Mechanics: Statics in SI Units, 12e 5 Equilibrium of a Rigid Body Chapter Objectives Develop the equations of equilibrium for a rigid body Concept of the free-body diagram for a rigid body
More informationMATHEMATICS 132 Applied Mathematics 1A (Engineering) SUPPLEMENTARY EXAMINATION
MATHEMATICS 132 Applied Mathematics 1A (Engineering) SUPPLEMENTARY EXAMINATION DURATION: 3 HOURS 17TH JUNE 2011 MAXIMUM MARKS: 100 LECTURERS: PROF J. VAN DEN BERG AND DR J. M. T. NGNOTCHOUYE EXTERNAL EXAMINER:
More informationI certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
NAME: ME 270 Fall 2012 Examination No. 3 - Makeup Please review the following statement: Group No.: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
More informationThe centroid of an area is defined as the point at which (12-2) The distance from the centroid of a given area to a specified axis may be found by
Unit 12 Centroids Page 12-1 The centroid of an area is defined as the point at which (12-2) The distance from the centroid of a given area to a specified axis may be found by (12-5) For the area shown
More informationMechanics of Materials CIVL 3322 / MECH 3322
Mechanics of Materials CIVL 3322 / MECH 3322 2 3 4 5 6 7 8 9 10 A Quiz 11 A Quiz 12 A Quiz 13 A Quiz 14 A Quiz 15 A Quiz 16 In Statics, we spent most of our time looking at reactions at supports Two variations
More informationModule 2. Analysis of Statically Indeterminate Structures by the Matrix Force Method
Module 2 Analysis of Statically Indeterminate Structures by the Matrix Force Method Lesson 10 The Force Method of Analysis: Trusses Instructional Objectives After reading this chapter the student will
More informationStatics - TAM 211. Lecture 39 April 25, 2018
Statics - TAM 211 Lecture 39 April 25, 2018 Announcements Check ALL of your grades on Compass2g. Report issues Exam grades will be posted later this week There will be Discussion Sections next week Upcoming
More informationStructural Analysis. Method of Joints. Method of Pins
Structural nalysis / Method of Pins I m reading a book about an1gravity. It s impossible to put down. Pop Quiz What is today s date? 2 1 Trusses Trusses are common means of transferring loads from their
More informationDeterminate portal frame
eterminate portal frame onsider the frame shown in the figure below with the aim of calculating the bending moment diagram (M), shear force diagram (SF), and axial force diagram (F). P H y R x x R y L
More informationDelft Applied Mechanics Course: Statics AE1-914-I. 18 August 2004, 9:00 12:00
Delft pplied Mechanics Course: Statics E1-914-I 18 ugust 2004, 9:00 12:00 This is the English exam. Only the answer forms will be collected ny other sheets will be rejected. Write down your name and student
More informationINTI INTERNATIONAL UNIVERSITY FOUNDATION PROGRAMME (ENGINEERING/SCIENCE) (CFSI) EGR 1203: ENGINEERING MECHANICS FINAL EXAMINATION: AUGUST 2015 SESSION
i) (0.005 mm) 2 (1 mark) EGR1203(F)/Page 1 of 14 INTI INTERNATIONAL UNIVERSITY FOUNDATION PROGRAMME (ENGINEERING/SCIENCE) (CFSI) EGR 1203: ENGINEERING MECHANICS FINAL EXAMINATION: AUGUST 2015 SESSION Instructions:
More informationCHAPTER 2: EQUILIBRIUM OF RIGID BODIES
For a rigid body to be in equilibrium, the net force as well as the net moment about any arbitrary point O must be zero Summation of all external forces. Equilibrium: Sum of moments of all external forces.
More informationPlease review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam.
Please review the following statement: I certify that I have not given unauthorized aid nor have I received aid in the completion of this exam. Signature: INSTRUCTIONS Begin each problem in the space provided
More informationCHAPTER OBJECTIVES CHAPTER OUTLINE. 4. Axial Load
CHAPTER OBJECTIVES Determine deformation of axially loaded members Develop a method to find support reactions when it cannot be determined from euilibrium euations Analyze the effects of thermal stress
More informationAnnouncements. Equilibrium of a Rigid Body
Announcements Equilibrium of a Rigid Body Today s Objectives Identify support reactions Draw a free body diagram Class Activities Applications Support reactions Free body diagrams Examples Engr221 Chapter
More informationEQUATIONS OF EQUILIBRIUM & TWO- AND THREE-FORCE MEMEBERS
EQUATIONS OF EQUILIBRIUM & TWO- AND THREE-FORCE MEMEBERS Today s Objectives: Students will be able to: a) Apply equations of equilibrium to solve for unknowns, and b) Recognize two-force members. In-Class
More informationPROBLEM 6.1 SOLUTION. Free body: Entire truss: (3.2 m) (48 kn)(7.2 m) = 0 = = = BC. 60 kn. Free body: Joint B: = kn T. = 144.
PROBLEM 6.1 Using the method of joints, determine the force in each member of the truss shown. State whether each member is in tension or compression. Free bod: Entire truss: Σ F = 0: B = 0 B = 0 Σ M =
More informationThe case where there is no net effect of the forces acting on a rigid body
The case where there is no net effect of the forces acting on a rigid body Outline: Introduction and Definition of Equilibrium Equilibrium in Two-Dimensions Special cases Equilibrium in Three-Dimensions
More informationCIV 207 Winter For practice
CIV 07 Winter 009 Assignment #10 Friday, March 0 th Complete the first three questions. Submit your work to Box #5 on the th floor of the MacDonald building by 1 noon on Tuesday March 31 st. No late submissions
More informationEQUILIBRIUM OF RIGID BODIES
EQUILIBRIUM OF RIGID BODIES Equilibrium A body in equilibrium is at rest or can translate with constant velocity F = 0 M = 0 EQUILIBRIUM IN TWO DIMENSIONS Case where the force system acting on a rigid
More information3.032 Problem Set 1 Fall 2007 Due: Start of Lecture,
3.032 Problem Set 1 Fall 2007 Due: Start of Lecture, 09.14.07 1. The I35 bridge in Minneapolis collapsed in Summer 2007. The failure apparently occurred at a pin in the gusset plate of the truss supporting
More informationPart IB Paper 2: Structures. Examples Paper 2/3 Elastic structural analysis
ISSUEB 011 15 NOV 2013 1 Engineering Tripos Part IB SECOND YEAR Part IB Paper 2: Structures Examples Paper 2/3 Elastic structural analysis Straightforward questions are marked by t; Tripos standard questions
More informationPinned Truss Freebody Diagram (FBD) Blog Post pdf
Pinned Truss Freebody Diagram (FBD) Blog Post pdf Author: Surya Batchu Senior Stress Engineer Founder, STRESS EBOOK LLC. http://www.stressebook.com 1 P a g e Freebody Diagram (FBD) of a Pinned Truss In
More informationStatics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3
Statics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3 2 3 Determine the magnitude of the resultant force FR = F1 + F2 and its direction, measured counterclockwise from the
More informationCheck Homework. Reading Quiz Applications Equations of Equilibrium Example Problems Concept Questions Group Problem Solving Attention Quiz
THREE-DIMENSIONAL FORCE SYSTEMS Today s Objectives: Students will be able to solve 3-D particle equilibrium problems by a) Drawing a 3-D free body diagram, and, b) Applying the three scalar equations (based
More informationName. ME 270 Fall 2005 Final Exam PROBLEM NO. 1. Given: A distributed load is applied to the top link which is, in turn, supported by link AC.
Name ME 270 Fall 2005 Final Exam PROBLEM NO. 1 Given: A distributed load is applied to the top link which is, in turn, supported by link AC. Find: a) Draw a free body diagram of link BCDE and one of link
More informationChapter 04 Equilibrium of Rigid Bodies
Chapter 04 Equilibrium of Rigid Bodies Application Engineers designing this crane will need to determine the forces that act on this body under various conditions. 4-2 Introduction For a rigid body, the
More informationREVIEW. Final Exam. Final Exam Information. Final Exam Information. Strategy for Studying. Test taking strategy. Sign Convention Rules
Final Exam Information REVIEW Final Exam (Print notes) DATE: WEDNESDAY, MAY 12 TIME: 1:30 PM - 3:30 PM ROOM ASSIGNMENT: Toomey Hall Room 199 1 2 Final Exam Information Comprehensive exam covers all topics
More informationthree Point Equilibrium 1 and planar trusses ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture three point equilibrium http:// nisee.berkeley.edu/godden and planar trusses Point Equilibrium 1 Equilibrium balanced
More information