BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
|
|
- Alexandra Wiggins
- 5 years ago
- Views:
Transcription
1 BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N
2 P09 THRU P PIPE CLAMPS FOR RIGID STEEL CONDUIT No. Conduit O.D. Thickness Gauge (mm) Design Load Lbs (kg) P P P P P P P Slotted hex head screw and nut included with EG or HG Finish. No. Conduit P P9 P0 P P 5 P P O.D. Thickness Gauge (mm) Lbs (kg) Design Load , , , , ,
3 P5 THRU P PIPE CLAMPS FOR THIN WALL CONDUIT (E.M.T.) P THRU P7 UNIVERSAL CLAMPS FOR RIGID OR THINWALL CONDUIT Slotted hex head screw and nut included with EG or HG Finish. Slotted hex head screw and nut included with EG or HG Finish. No. P5 P P7 P P9 P0 P P P9 P0 P Conduit O.D. Wt/00 Design Thickness Gauge (mm) Lbs (kg) Load , , No. P P P P P5 P7 Conduit Thickness Gauge (mm) Wt/00 Lbs (kg) Design Load P5 THRU P57 PARALLEL CLAMPS FOR RIGID CONDUIT AND PIPE P00 THRU P00 ONE HOLE CLAMP FOR O.D. TUBING Slotted hex head screw and nut included. Finish: Electro-galvanized. Finish: Electro-galvanized and Aluminum No. P5 P5 P55 P5 P57 P5 P59 P570 P57 P57 P57 O.D. Thickness Gauge (mm) Lbs (kg) No. P00 P009 P00 P0 P0 P0 P0 P00 O.D. Tube Thickness Gauge (mm) Lbs (kg)
4 P0 THRU P070- PIPE CLAMPS FOR O.D. TUBING Slotted hex head screw and nut included with EG or HG Finish. O.D. Wt/00 Lbs (kg) P0 P05 P0 9 P P0 P09 7 P00 P0 5 P0 P0 7 P0 P P0 9 P07 7 P0 P09 P0 P7 P0 5 P0 5 7 P0 P 7 P0 P07 P0 5 P09 P9 7 P P05 5 P P0 P055 P05 P057 P 7 P P00 7 Design Load O.D. Wt/00 Lbs (kg) P0 7 7 P0 5 7 P0 5 7 P P P P P P P070 9 P070-9 P070-9 P P P 5 0 P070-0 P P P P P P P P P P070- P070-5 P070- P070- P070-9 P 5 0 Design Load 000 P55-5 THRU P55-0 SINGLE PIECE PIPE STRAP Hardware sold separately. No. P55-05 P55-07 P55-0 P55- P55-5 P55-0 P55-5 P55-0 P55-5 P55- P55-50 P55-0 A B C Thickness Design Load ,000.5
5 P9 THRU P7 STAND-OFF PIPE CLAMPS Hardware included. Finish: Electro-galvanized. Pipe Clamp " Wide No. O.D. Load D Load E A B C Gauge (mm) Lbs (kg) P P P P P P P Safety factor of 5 P09 THRU P7, P THRU P UNI-CLIP SUPPORT Material: Stainless steel type 0. The Uni-Clip supports meet or exceed load requirements for American Standard Code for Pressure Piping (97), and National Electric Code (97). P P7 P P9 P0 P Conduit O.D. Lbs (kg) P09 P P P P P5 P7 Conduit O.D. Lbs (kg) MU05 THRU MU0 MUSTANG UNIVERSAL ONE-PIECE PIPE, CONDUIT (GRC, EMT & IMC) AND TUBING CLAMPS No. MU05 Trade O.D. Height Above Channel "H" Min Max Min Max MU MU MU MU MU5 MU MU MU Finish: Electro-galvanized. Clamps are ga. MU00 MU50 MU
6 P00 UNICUSHION : ISOLATION MATERIAL UNICUSHION CLAMP SELECTION GUIDE Use with UNICUSHION Length " P (.5) " P (5.0) " P (9.9) " P0 5 (9.) " P05 (0.7) " P07 5 (9.7) " P7 (7.5) Use with UNICUSHION Length " P (5.0) " P00 (7.) " P0 (.) " P0 (0.0) " P07 5 (.) " P0 (5.) " P0 7 (90.5) " P0 9 (.) " P05 (79.) " P055 (.) " P059 (55.) 5" P07 7 (.5) " P070-0 (57.) Use with UNICUSHION Length " P0 (7.0) " P07 (.) " P0 (5.0) 5 " P09 (57.) " P00 (7.) " P0 5 (9.) " P0 (.) " P0 5 (.) " P0 (7.5) " P0 (09.) " P0 0 (5.0) " P05 (5.) " P05 (7.5) 5" P0 (.) " P070-9 (.) " P070-5 (5.0) UNICUSHION CLAMP CUTTING GUIDE O. D. Use With UNICUSHION Length P05 7 P0 P07 5 P0 P09 7 P00 P0 P0 5 P0 P0 P P0 5 P P0 P09 P0 P7 7 P0 7 P0 5 P0 P 7 P0 9 P07 9. O. D. Use With UNICUSHION Length P0 0 P09 0 P9 0 P05 5 P05 P05 7 P0 P055 P05 P057 P P059 5 P00 P0 7 P0 5 5 P0 5 5 P0 5 P05 5 P0 5 P P0 7 5 P P070 O. D. Use With UNICUSHION Length P070- P070-9 P070-9 P070-9 P 0 5 P070-0 P P P P P P P P P P070- P070- P070-5 P070-5 P070- P
7 00T00 THRU 09N0, 009N0 THRU 0N A B C D Wt/00 No. Lbs(kg) N N N N N0 07N0 00N0 0N0 0N05 05N0 0N07 07N0 09N09 5 0N Steel Tube O. D. A CUSH-A-CLAMP ASSEMBLY B C D Wt/00 Lbs(kg) T T T T T T T00 0T0 00T0 0T0 0N0 0N00 5 0N0 00N0 7 0N0 0N0 0N0 0N0 0N0 5 0N N05 050N05 05N N0 05N0 5 0N07 0N07 09N N0 0N N
8 00M007 THRU 0M0 CUSHACLAMP ASSEMBLY OMEGA SERIES cludes clamp and cushion. Materials: Clamp: ZD or stainless steel. Cushion: Thermoplastic elastomer. Note: Can be mounted to any flat surface. Tubing O. D. Water A B C D E F G H J M M M M M M M M M M M M M M M M M M M M M Lbs (kg)
9 UB PA THRU UBPA CUSHACLAMP ASSEMBLY U-BOLT SERIES Materials: U Bolt: Electro-galvanized finish or Type SS Cushion: Thermoplastic elastomer. Note: Not intended for use with metal framing components due to the length of the thread. UB PA UB PA UBPA UB PA UB PA UBPA UB PA UBPA UB PA UBPA UB5PA UBPA UBPA UB0PA UBPA Wt/00 A B C D E F H Lbs (kg) UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B UNC-B
10 CG-0 THRU CG- CUSHAGRIP CG-0 CG-0 CG-0 CG- O.D. Tube s PullOut Load Lbs(kN) Load cludes Cushion, V-pad, and Hardware. Materials: Cushion: Thermoplastic elastomer. Temperature Rating: - F to +75 F (- C to 5 C) Hex Head Wt/00 A B C D Lbs(kg) CG x " CG x " CG x " CG x " PUX THRU PUX0 CUSHATHERM PUX PUX PUX5 PUX PUX7 PUX PUX PUX5 PUX PUX PUX5 PUX PUX5 PUX Hole O.D. IPS O.D. Length ID ID ID ID ID ID ID ID ID ID ID ID ID ID PUX50 PUX0 PUX70 PUX0 PUX0 PUX50 PUX0 PUX0 PUX50 PUX0 PUX50 PUX0 Hole O.D. IPS O.D. Length 5 ID ID ID ID ID ID ID ID ID ID ID ID
11 J05 THRU J, J05 N THRU J N (PLASTIC COATED) "J" CONDUIT & PIPE HANGER No. J05 J07 J0 J J5 J0 J5 J0 J5 J J50 J0 J Wt/00 Wt/00 A B C D E F Load Lbs (kg) No. Lbs (kg) 0 J05N 5 x x J07N 7 x x J0N* x x JN x x J5N* 5 x x J0N* 5 x x J5N 5 9 x x..5 7 J0N* 7 9 x x J5N 5 9 x x JN* 5 9 x x J50N 5 9 x x J0N* 9 x, x JN 9 x 0, x *Standard glass drainline and glass process pipe sizes. Minimum safety factor of five (5) on ultimate load. P7 PIPE ROLLER FOR " - " PIPE Requires each " x 5 separately. others. Chart for Dimension A No sulation " " sulation Thickness " " " "
12 P7- THRU P7- PIPE ROLLER FOR " - " PIPE during installation. P7- P7- P7- P7- A Lbs (kg) No sulation sulation Thickness " (5.) " (.) " (50.) " (.5) " (7.) " (0.) P7- P7- P7- P P7- P7- P7- P P7- P7- P7- P P7- P7- P7- P P7- P7- P7- P7- P P7- P7- P7- P7- P P7- P7- P7- P7- P P7- P7- P7- P7- P7- P7- - " x 5 " P7- P7- P7- P7- P7- P7- - P7- P7- P7- P7- P7- P P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P7- P75 PIPE ROLLER FOR " - " PIPE Material: Cast iron rollers. " x 5 and Chart for Dimension A Sold in pairs. others. No sulation " " sulation Thickness " " " " * * * * * (*Not used for this size) Standard Dimensions for 5 " (.mm) width series channel fittings (Unless Otherwise Shown on Drawing) Hole Diameter: 9 " (.mm); Hole Spacing - From End: " (0.mm); Hole Spacing - On Center: 7 " (7.mm); Width: 5 "(.mm); Thickness: " (.mm)
13 P7 PIPE ROLLER FOR " - " PIPE and Sold separately. " x 5 Chart for Dimension A Material: Cast iron rollers. others. " " sulation Thickness " " " P PIPE SUPPORT BRACKET P PIPE SUPPORT BRACKET P PIPE BLOCK For " pipe to " pipe. For " pipe to " pipe. For " (50.) to " (0.) Pipes Design Load (Upright Channel) Lbs (kg) P000 P00 P Design Load (Upright Channel) Lbs (kg) P000 P00 P
14 " 9.mm " 5.mm " ".mm " 50.mm ".5mm " 7.mm " 0.mm 5" 7.0mm " 5.mm " 0.mm 0" 5.0mm " 0.mm " (9.mm) " (5.mm) " (.mm) " (.mm) " (50.mm) " (.5mm) T S T F S T F S T F S T F S T F S T 0.7 S. 0.7 T F S T F S T F S T F S T F S T F S T F S T F S T F S T F T F T F
15 PIPE SPACING TABLE the appropriate columns intersect, the dimension is given. These factors are included in the dimensions given: " were increased to the next larger ".. " (7.mm) " (0.mm) 5" (7.0mm) " (5.mm) " (0.mm) 0" (5.0mm) " (0.mm) T F S T F S T F S T F S T F T F T F 7 T F S T F S T F S T F S T F T F T F " 7.mm " 0.mm 5" 7.0mm " 5.mm " 0.mm 0" 5.0mm " 0.mm
16 CHANNEL SELECTION FOR SCHEDULE 0 SPRINKLER PIPE TRAPEZE HANGERS size for the specified channel. An entry of N/A indicates that the channel cannot O.D. Wall Thickness I. D. Water Total Unistrut Channel P000 P000 P5500 P5000 Section Modulus in (cm ) Unistrut Channel P00 P00 P550 P500 Section Modulus in (cm ) " " " " " " " " 5" " " 0" ' - " ' - 0" ' - " ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" " " " " " " " " 5" " " 0" ' - " P000 P000 P000 P000 P000 P000 P000 P000 P000 P000 P5500 P5500 ' - 0" P000 P000 P000 P000 P000 P000 P000 P000 P000 P5500 P5500 P5000 ' - " P000 P000 P000 P000 P000 P000 P000 P5500 P5500 P5500 P5000 P5000 ' - 0" P000 P000 P000 P000 P000 P5500 P5500 P5500 P5500 P5500 P5000 N/A ' - 0" P5500 P5500 P5500 P5500 P5500 P5500 P5500 P5500 P5000 P5000 N/A N/A 5' - 0" P5500 P5500 P5500 P5500 P5500 P5500 P5000 P5000 P5000 P5000 N/A N/A ' - 0" P5500 P5500 P5500 P5500 P5000 P5000 P5000 P5000 P5000 N/A N/A N/A 7' - 0" P5500 P5000 P5000 P5000 P5000 P5000 P5000 P5000 N/A N/A N/A N/A ' - 0" P5000 P5000 P5000 P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A 9' - 0" P5000 P5000 P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A N/A 0' - 0" P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A N/A N/A N/A " " " " " " " " 5" " " 0" ' - " P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 ' - " P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P550 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P550 P550 5' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P550 P550 P550 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P550 P550 P550 P500 7' - 0" P00 P00 P00 P00 P00 P00 P00 P550 P550 P550 P550 P500 ' - 0" P00 P00 P00 P00 P00 P550 P550 P550 P550 P550 P500 N/A 9' - 0" P00 P00 P00 P00 P550 P550 P550 P550 P550 P550 P500 N/A 0' - 0" P00 P550 P550 P550 P550 P550 P550 P550 P550 P500 P500 N/A
17 CHANNEL SELECTION FOR SCHEDULE SPRINKLER PIPE TRAPEZE HANGERS size for the specified channel. An entry of N/A O.D. Wall Thickness I. D. Water Total Unistrut Channel P000 P000 P5500 P5000 Section Modulus in (cm ) Unistrut Channel P00 P00 P550 P500 Section Modulus in (cm ) " " " " " " " " 5" " " 0" ' - " ' - 0" ' - " ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" ' - 0" " " " " " " " " 5" " " 0" ' - " P000 P000 P000 P000 P000 P000 P000 P000 P000 P5500 P5500 P5000 ' - 0" P000 P000 P000 P000 P000 P000 P000 P000 P5500 P5500 P5000 P5000 ' - " P000 P000 P000 P000 P000 P5500 P5500 P5500 P5500 P5500 P5000 N/A ' - 0" P000 P000 P000 P000 P5500 P5500 P5500 P5500 P5500 P5000 P5000 N/A ' - 0" P5500 P5500 P5500 P5500 P5500 P5500 P5500 P5000 P5000 P5000 N/A N/A 5' - 0" P5500 P5500 P5500 P5500 P5500 P5000 P5000 P5000 P5000 N/A N/A N/A ' - 0" P5500 P5500 P5500 P5500 P5000 P5000 P5000 P5000 N/A N/A N/A N/A 7' - 0" P5500 P5000 P5000 P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A ' - 0" P5000 P5000 P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A N/A 9' - 0" P5000 P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A N/A N/A 0' - 0" P5000 P5000 P5000 N/A N/A N/A N/A N/A N/A N/A N/A N/A " " " " " " " " 5" " " 0" ' - " P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 ' - " P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P550 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P00 P550 P550 ' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P00 P550 P550 P550 5' - 0" P00 P00 P00 P00 P00 P00 P00 P00 P550 P550 P550 P500 ' - 0" P00 P00 P00 P00 P00 P00 P00 P550 P550 P550 P500 P500 7' - 0" P00 P00 P00 P00 P00 P550 P550 P550 P550 P550 P500 N/A ' - 0" P00 P00 P00 P00 P550 P550 P550 P550 P550 P500 P500 N/A 9' - 0" P00 P00 P00 P550 P550 P550 P550 P550 P550 P500 N/A N/A 0' - 0" P00 P550 P550 P550 P550 P550 P550 P550 P500 P500 N/A N/A
18 ELECTRICAL METALLIC TUBING (EMT) - THIN WALL Tubing Outside side Of Tubing Lbs/Ft (kg/m) INTERMEDIATE METALLIC CONDUIT (IMC) Conduit Outside side Of Conduit Lbs/Ft (kg/m) of Conduit and Conductor Lbs/Ft (kg/m) COPPER TUBE (TYPE L) COPPER TUBE (TYPE K) " " " 5 " " " " " " " " " " 5" " " 0" " O.D. Tubing O.D. Wall Thick. Lbs/Ft Water (kg/m)) Lbs/Ft (kg/m) " " " 5 " " " " " " " " " " 5" " " 0" " O.D. Tubing O.D. Wall Thick. Lbs/Ft Water (kg/m)) Lbs/Ft (kg/m)
19 RIGID STEEL (HEAVY DUTY) CONDUIT WATER FILLED PIPE SUPPORT SPACING Conduit I. D. Of Conduit O. D. Of Conduit O. D. Of of Conduit Lbs/Ft (kg/m) Of Conduit And Conductor Lead Covered Lbs/Ft (kg/m) Not Lead Covered Lbs/Ft (kg/m) Max. Max. Ft (m) Ft (m) CONDUIT SUPPORT SPACING Support for Rigid Metal Conduit Conduit Ft (m) Larger.0 SCHEDULE : PVC PLASTIC PIPE Outside side Water Lbs/Ft (kg/m) Lbs/Ft (kg/m)
20 DATA FOR SCHEDULE STEEL PIPE Schedule Outside Dia. side Dia. Lbs/Ft (kg/m) Lbs/Ft (kg/m) Schedule Outside Dia. side Dia. Lbs/Ft (kg/m) Lbs/Ft (kg/m)
THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)
CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37850 Application: HONDA 300 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37851 Application: HONDA 400 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationG-FIRE FLANGE ADAPTERS
G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10
More informationxce series & xjf EXPLOSIONPROOF ENCLOSURES EXPLOSIONPRROOF ENCLOSURES CERTIFICATIONS STANDARD FEATURES DESIGN OPTIONS MATERIAL ADALET.
EXPLOSIONPROOF XCE: Explosionproof Control Enclosures XCEX: Flameproof Control Enclosures XCEQ: Explosionproof Quad-Lead Control Enclosures XJF: Explosionproof Junction Boxes STANDARD FEATURES standard
More informationConfigurations & Parts Identification
Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com
More informationMil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
More informationQUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING
QUAKE BRAKE TM MODEL QBC-12 SEISMIC SWAY BRACING KIT FEATURING The QUAKE BRAKE TM Seismic Dampening Device. The QUAKE BRAKE TM was Certified NEBS Level 3 Zone Compliant after being tested in accordance
More informationSection Installation accessories. > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series
Section > UNION Series > TIES Series > FIXO Series > CABLO Series > FASTY Series > RAILDIN Series 22 23 > CABLE GLANDS WITH DEVICE TO PREVENT ANY UNSCREWING UNION Series B (*) IP8 (1 bar) C A in mm A B
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationF O R C E S I L E N T
E L E C T R I C A D J U S T A B L E & F O R C E V I B R A T O R S S P E E D S I L E N T S p e e d D i a l C o n t r o l o n A l l U n i t s L o w P o w e r C o n s u m p t i o n O v e r l o a d P r o t
More informationI nllk 08018/18 I nllk I nllk 08036/36 I nllk I I nllk 08058/58 I
I nllk / I x W x W x W x W x W Technical data Cooper Crouse-Hinds - all rights reserved nllk / nllk nllk / nllk nllk / Marking to //EC II G Ex na II T / II D td A IP T C EC Conformity Statement PTB ATEX
More informationSECTION 23 - METRIC DESIGN INFORMATION. Table of Contents
SECTION 23 - METRIC DESIGN INFORMATION Table of Contents Metric System Conversions and Abbreviations... 23-3 EXTREN Availability List... 23-4 EXTREN vs. Traditional Materials... 23-6 SECTION 23 METRIC
More informationSTEEL. General Information
General Information General Information TYPICAL STRESS-STRAIN CURVE Below is a typical stress-strain curve. Each material has its own unique stress-strain curve. Tensile Properties Tensile properties indicate
More informationcleanroom systems exhibition systems interior design systems software and service presentation systems
I n n o va t i v e f a b r i c t e n s i o n e x t r u s i o n s f r o m O C TA N O R M exhibition systems interior design systems presentation systems cleanroom systems software and service M A G N I
More informationDRAWING ISO 200 REV. "R" TYP TYP SLOT OPTIONAL .130 TYP KNURL STYLE - MFG. OPTION
.500 SHELL I.D. 0.39.135 F T TOP ENTRY H J K SLOT OPTIONAL E END ENTRY G.062.062 0.49 P.130 KNURL STYLE - MFG. OPTION R S M DIMENSIONS PART # P N CABLE ENTRY ISO - 100 0.36 0.37 02 THRU 33 ISO - 200 0.57
More informationExperiment Instructions. Deformation of Frames
Experiment Instructions SE 0.20 Deformation of Frames Experiment Instructions This manual must be kept by the unit. Before operating the unit: - Read this manual. - All participants must be instructed
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationBlue Comet REV
-028-1 Blue Comet -6-2 REV.01101 Boiler Parts 1.) Shell ( blue & gray ) FB-1100055 *10.00 ( boiler )( # 8 ) 2.) Cab ( blue & dark blue ) FB-1100056 *0.00 ( # 8 ).) Handrail ( right )( nickel ) FB-111001
More informationMR medium rating busbar
technical information General features MR is fully compliant with S EN 0-, specifically, the rated current of the Zucchini busbar trunking systems is always rated at the average ambient temperature of
More informationLoad Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction
Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260
More informationHT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationTelescope Mechanical Design
Telescope Mechanical Design Albert Lin The Aerospace Corporation (310) 336-1023 albert.y.lin@aero.org 6/27/06 6/27/06 Telescope Mechanical Design 1 Overview Design Overview Instrument Requirements Mechanical
More informationVariable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm Variable Speeds 300-2000rpm
More informationObtaining the Center of Gravity, Volume, Weight and More
C h a p t e r 10 Obtaining the Center of Gravity, Volume, Weight and More In this chapter, you will learn the following to World Class standards: The Importance of the Center of Gravity The Inquiry Toolbar
More informationand F NAME: ME rd Sample Final Exam PROBLEM 1 (25 points) Prob. 1 questions are all or nothing. PROBLEM 1A. (5 points)
ME 270 3 rd Sample inal Exam PROBLEM 1 (25 points) Prob. 1 questions are all or nothing. PROBLEM 1A. (5 points) IND: In your own words, please state Newton s Laws: 1 st Law = 2 nd Law = 3 rd Law = PROBLEM
More informationPIPING SYSTEMS. Pipe and Tubing Standards Sizes for pipes and tubes are standardized. Pipes are specified by a nominal diameter and a schedule number.
PIPING SYSTEMS In this chapter we will review some of the basic concepts associated with piping systems. Topics that will be considered in this chapter are - Pipe and tubing standards - Effective and hydraulic
More informationPR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
More information3.8M C-BAND Rx/Tx ANTENNA SYSTEM
Revision J May 13, 2002 ASSEMBLY MANUAL 3.8M C-BAND Rx/Tx ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 3.8M C-BAND Rx/Tx ANTENNA SYSTEM J Revised Per ECN#3094 10/7/04 H Revise
More informationClausing Industrial, Inc. Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses
www.clausing-industrial.com Variable Speed 20" Single and Multi-spindle, Belt Drive Industrial Drill Presses Clausing Industrial, Inc. Two Speed Variable Speeds 150-2000rpm Variable Speeds 200-1300rpm
More informationAppendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus
Appendix A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus r = radius of gyration = I/A J = polar moment of inertia Z p = polar section modulus Circle R D
More informationThe LAT Electronics consists of five distinct box assemblies as follows:
I. SYNOPSIS The preliminary stress analyses for the DAQ Electronics assemblies have been performed per the conditions specified in the Environmental Specification LAT-SS-00778. The analysis considered
More information9: COTTER PINS 9: COTTER PINS COTTER PINS COTTER PINS /6" COTTER PINS 9-000 9-00 9-00 9-003 9-00 9-006 /6 X / /6 X 3/ /6 X /6 X - /6 X -/ /6 X 0 0 0 0 0 0 /6" COTTER PINS 9-08 9-0 /6 X /6 X 0 0 " COTTER
More informationTechnical Specifications - RJ Series
Technical Specifications - Raised Cover configuration - 4 cover screws, lift off cover Construction Pan head screws Cover retention chain Raised Cover Minimizes protruding surfaces Stainless steel beaded
More information411 Steel Couplings. 411 Steel Couplings--Standard Length Sleeves 1/2 thru 12 Steel Pipe Sizes. Sleeve Thk. X Lgth. In.
Steel Couplings 0/0 Steel Couplings--Standard Length s 1/ thru Steel Pipe Sizes Nom. Pipe Size 1/ / 1 1 1 1/ Pipe.0 1.0 1. 1. 1.90.00.... Buna-N Gasket -000001-00 -00001-00 -00011-00 -00001-00 -00019001-00
More informationINSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN Application:2002 and newer+ Suzuki Eiger 400
INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN 63840 Application:2002 and newer+ Suzuki Eiger 400 Your safety, and the safety of others, is very important. To help you make informed
More informationPressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
More informationDirect and Shear Stress
Direct and Shear Stress 1 Direct & Shear Stress When a body is pulled by a tensile force or crushed by a compressive force, the loading is said to be direct. Direct stresses are also found to arise when
More informationLES. Single-stage end-suction pumps Identification Type key
Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction
More informationS E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S
1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel
More informationEX-EMERGENCY LIGHT FITTINGS
EX-EMERGENCY LIGHT FITTINGS nllk 0...N 1-36 W Plastic version for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 N are conform to the requirements of the ATEX-Directive
More informationRGS08 Linear Rails: RGS08 Non-Motorized With and Without Guide Screw. RGS08 Non-Motorized Linear Rails
RGS08 RGS08 Non-Motorized With and Without Guide RGS08 Non-Motorized Linear Rails RG Series linear rails are available: RGS08 Non-Motorized, -driven linear rail RGS08 Non-Motorized linear rail without
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationThe University of Melbourne Engineering Mechanics
The University of Melbourne 436-291 Engineering Mechanics Tutorial Four Poisson s Ratio and Axial Loading Part A (Introductory) 1. (Problem 9-22 from Hibbeler - Statics and Mechanics of Materials) A short
More informationBlizzard. Outdoor. Projector Enclosures 5-15K. Fourth eneration. Projector Enclosures
G4 5-15K G4 Fourth eneration is the world s most popular outdoor projector enclosure for permanent installation in any climate, for video mapping, outdoor attractions, advertising and outdoor movies. comes
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More informationEMT Set-Screw Connectors, Insulated
Insulated EMT Set-Screw Connectors EMT Compression Couplings TC722US TK114US TC724US TK111US Insulated EMT Compression Connector (TC7110US) Insulated EMT Set-Screw Connector (TC729US) EMT Set-Screw Coupling
More informationRGS06 Linear Rails: RGS06 Non-Motorized With and Without Guide Screw. RGS06 Non-Motorized Linear Rails
on-motorized With and Without Guide on-motorized Linear Rails RG Series linear rails are available: on-motorized, -driven linear rail on-motorized, Wide format, -driven linear rail on-motorized, Wide format,
More informationICSE Board Class IX Physics Paper 1
ICSE Board Class IX Physics Paper 1 Time: 2 hrs Total Marks: 80 General Instructions: 1. Answers to this paper must be written on the paper provided separately. 2. You will not be allowed to write during
More informationALUMINUM STRUCTURAL PLATE HEADWALLS AASHTO LRFD BASIS OF DESIGN
ALUMINUM STRUCTURAL PLATE EADWALLS AASTO LRFD BASIS OF DESIGN LANE ENTERPRISES, INC. www.lane-enterprises.com Required Backfill and Load Cases: ALUMINUM STRUCTURAL PLATE EADWALLS BASIS OF DESIGN Backfill
More informationTransmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level
Overview Function s are for measuring the liquid levels in wells, tanks, channels and dams. Sensor Diaphragm p U const. U +2 (brown) I EM I - (blue) 0, U B s are submersible sensors for hydrostatic level
More informationKM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3
NO. ISSUED: REVISED: 71193 OCT. 2, 2001 JAN. 27, 2003 HOSHIZAKI STACKABLE CRESCENT CUBER MODELS KM-1600SWH KM-1600SRH KM-1600SWH3 KM-1600SRH3 PARTS LIST KM-1600SWH L-0 June, 2001 M-0 Feb., 2002 M-1 Feb.,
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationflexible couplings for pipe repair
A R P O L R E P flexible couplings for pipe repair 1 TABLE OF CONTENTS Advantages and Installation Arpol Repair Systems Nominal charts Material specifications Gaps between pipe ends Outside Diameter tolerances
More informationANSI/SPRI ES-1 Test Reports UL Classified Products
Introduction to ES-1 The ANSI/SPRI ES-1 Roof Edge Standard is a reference for those who design, specify or install edge materials used with low slope roofs. This standard focuses primarily on design for
More informationVisit any one of our 30 locations or visit us on line at
TYPE IA ALUMINUM 2886509079 2886501870 2886510013 2886510010 2886510014 2886504441 AS3002 2' TYPE IA AS3003 3' TYPE IA AS3004 4' TYPE IA AS3006 6' TYPE IA AS3008 8' TYPE IA AS3010 10' TYPE IA 34.99 57.99
More information2.4M SERIES 1241 ANTENNA
4096-859 Revision D April 19, 2016 2.4M SERIES 1241 ANTENNA General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com General Dynamics Page 1 4/19/2016
More informationSurface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
More informationTisa Enterprises. The Clamping Professionals
Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0
More informationG-FIRE GROOVED FITTINGS
G-FIRE GROOVED FITTINGS 29 Pictorial Table of Contents Figure 510 90 Cast Elbows Page 32 Figures 212 & 312 22 1 2 Elbows Page 35 Figure 501 45 Cast Elbows Page 32 Figures 211 & 311 11 1 4 Elbows Page 36
More informationIndicate Positive, Negative or Differential, Accurate within 1%
SERIES 2000 MAGNEHELIC DIFFERENTIAL GAGES Indicate Positive, Negative or Differential, Accurate within 1% RUBBER RELIEF PLUG WILL UNSEAT ITSELF WHEN GAGE IS OVERPRESSURIZED.025 [.64] SPACE CREATED BY 3
More informationLimited Use Document This presentation is provided in the interest of the free exchange of ideas but may not represent the final or complete results
Limited Use Document This presentation is provided in the interest of the free exchange of ideas but may not represent the final or complete results of the research. The presentation is regarded as fully
More informationProPress (304 FKM) 1.3
ProPress (304 FKM) 41 ProPress (304 FKM) Viega ProPress for stainless is engineered for harsh industrial environments where the piping systems may come into contact with corrosive cleaning liquids. A complete
More informationSTUD & TRACK ROLL FORMING MACHINE
STUD & TRACK ROLL FORMING MACHINE R O L L F O R M E R S U S A I W W W. R O L L F O R M E R S - U S A. C O M Page1 Cantilevered Dual Headed 6,000 lb Decoiler Includes mandrel and stand Can accommodate 22
More informationKSV. Slot diffusers. Ordering code. Description. Linear diffusers 1 / 16
Linear diffusers 1 / 1 KSV Slot diffusers Ordering code Number of slots Diffuser Length (mm) KSV - 1... - 19 Description KSV is an air terminal element primarily designated for air supply. It is suitable
More informationUSRA Steam Engine
USRA Steam Engine --- 0-5- 0-5-0 0-57- 0-57-0 USRA --- Steam Engine (top section) Engine Parts.) Shell (Pennsylvania)(# 7) FB-00 *5.00 ( Brunswick green, Tuscan red & graphite ) ( gold numbers ).) Shell
More informationVX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity
VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing
More informationAE302,ME302,DAE14,DME14
AE302,ME302,DAE14,DME14 III SEMESTER DIPLOMA EXAMINATION, JANUARY-2013 MANUFACTURING TECHNOLOGY-I Time: 3 Hours Max. Marks: 75 GROUP A : Answer any three questions. (Question No. 1 is compulsory) Q.1 What
More informationAlco PA AA Diesel Set
30-15-1 30--1 Alco PA AA Diesel Set GL0901 PA A Unit ( lead ) Diesel Engine 1.) Shell ( blue, yellow, silver ) FC-000 *5.00 ( A unit )( Delaware & Hudson )( # 17 ) Shell ( orange, black, silver ) FC-001
More informationCartridge Valves Technical Information. Quick reference
Quick reference Contents CPF0... 8. CP600-5... 8. CP60-5... 8. 066 handle kit... 8.5 MP06... 8.6 MP... 8.6 X05-FD0 Traction manifold... 8.9 X05-FD6 Traction manifold... 8.0 X05-FD0 Traction manifold...
More informationU.S. Patents 6,290,217 6,244,579
CR CR Series Overview U.S. Patents 6,90,7 6,,579 For the best in vibration isolation capabilities, choose Enidine s. Smaller than traditional wire ropes, these unique isolators provide cost-effective,
More informationOdor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
More informationCabinets NOVASTAR. Overview Cabinets Wall mounted cases Accessories for cabinets and wall mounted cases 3.
Overview..... 0 NOVASTAR Cabinets NOVASTAR Cabinets...... 1 Wall mounted cases........ 2 Accessories for cabinets and wall mounted cases 3 Climate control 4 Desk-top cases 5 Subracks/ 19" chassis... 6
More informationFeatures of the Jergens Zero-Point Mounting System
Features of the Jergens Zero-Point Mounting System Typical applications for the Jergens Zero-Point System: 1.36 ZERO POINT MOUNTING SYSTEM Pull Studs and Engagement Screws Pages 1.42-1.43 Clamping Plates
More informationFFHT1831QE2 FFHT1831QM2 FFHT1831QP2 FFHT1831QQ2 FFHT1831QS2
Product No. E2 M2 P2 Q2 S2 Series R134a R134a R134a R134a R134a Color black silver mist white bisque stainless Volts 115V 115V 115V 115V 115V Wiring Diagram A01475501 A01475501 A01475501 A01475501 A01475501
More informationBall screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance
Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low
More informationSurface-mounting Thermostats ATH Type Series
Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments
More informationCam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion
More informationMETAR CABLE MANAGEMENT SYSTEMS UNISTRUT METAL FRAMING SYSTEMS TECHNICAL DATA. bonn metals CONSTRUCTION INDUSTRIES L.L.C.
METAR CABLE MANAGEMENT SYSTEMS UNISTRUT METAL FRAMING SYSTEMS TECHNICAL DATA bonn metals CONSTRUCTION INDUSTRIES L.L.C. CONTENTS PREFACE 01 MATERIAL AND FINISHES 02 DESIGN CONSIDERATIONS 05 INTRODUCTION
More informationmy!wind Ltd 5 kw wind turbine Static Stability Specification
my!wind Ltd 5 kw wind turbine Static Stability Specification 1 P a g e 0 3 / 0 4 / 2 0 1 4 Contents Contents... 2 List of Changes... 2 Appendixes... 2 General remarks... 3 1. Introduction... 4 2. Geometry...
More informationMade in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS. No. E14/A1
Made in Italy HOSE REELS CATALOGUE TECHNOLOGY FOR FLUIDYNAMICS No. E14/A1 The complete range of our products is presented in the specific catalogues: HOSE REELS CATALOGUE No. E14/A2 HOSE REELS CATALOGUE
More informationHUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS
HUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS NG2515PB/NG2520PB THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h
More informationStatics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3
Statics Chapter II Fall 2018 Exercises Corresponding to Sections 2.1, 2.2, and 2.3 2 3 Determine the magnitude of the resultant force FR = F1 + F2 and its direction, measured counterclockwise from the
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-S10-AH-L 179517-1 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in
More informationZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
More informationSection 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA
Section 12. EC s PHYSICAL DIMENSIONS NUMBER TYPE A B C & F D E S T *-43517-EC *-44119-EC *-45224-EC *-47035-EC (EC35) (EC41) (EC52) (EC70) MAGNETIC DATA in. 1.358 ±.030.681 ±.006.374 ±.012.469.8955 ±.020.108
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationSales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - L I G H T F I T T I N G S nllk 0... 1 - W All-plastic design for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 conform to the requirements of the ATEX-Directive
More informationCOMPOUND PENDULUM. AIM: 01. To determine the radius of gyration k of given compo pendulum. 02. To verify the relation
COMPOUND PENDULUM AIM: 01. To determine the radius of gyration k of given compo pendulum. 02. To verify the relation T= 2 π 2 2 K + (OG) g (OG) Where, T = Periodic time sec. K = Radius of gyration about
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationAmphenol. Amphenol-Tuchel Electronics GmbH. Series C 146 Heavy Duty Connectors Core Programme
Amphenol Amphenol-Tuchel Electronics GmbH Series C 146 Heavy Duty Connectors Core Programme The Company General information These connectors are designed and produced in conformity with the voltage directive
More informationAssembly Instructions for the 1-Wire Weather Station V2.0/V3.0
Assembly Instructions for the 1-Wire Weather Station V2.0/V3.0 Tools and Supplies Required (not included): Phillips screwdriver 3/8" wrench Drill with 5/32" bit "U" type mounting bracket (i.e., part number
More informationInstructions for Parts Books
Instructions for Parts Books The heading at the top of the page will be the same for the picture of the parts at it is for the page with the part numbers. Definition of column headings on part number pages:
More informationG1033Z Replacement Parts
GZ Replacement Parts PZ0 MOTOR PULLEY - PSS0M SET SCREW M- X PVM V-BELT M- L0 PZ0 SWITCH BRACKET PZ0 MAGNETIC SWITCH MA-0 PZ0 STRAIN RELIEF MGA PZ0 MOTOR CORD AWG X C PZ PLASTIC SWITCH CVR SCREW P HOLE
More informationflexible couplings for pipe connections
www.arpol.com A R P O L INSTAL flexible couplings for pipe connections 1 TABLE OF CONTENTS Advantages & installation 3 Sealing system & applications Nominal charts Material Specifications Gaps between
More informationBettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.
Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from
More informationTHE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
More information