RONDA powertech 500 and 762E, 763E

Size: px

Start display at page:

Download "RONDA powertech 500 and 762E, 763E"

Stanley Stanley
6 years ago
Views:

RONDA powertech 500 and 762E, 763E Affordable metal movements for reliable quality watches Caliber 509

Caliber 509 Size 10½''' Version Swiss Made Swiss Parts 1 Jewels / nickel plated 1 Jewels / nickel plated

Reduction of consumption approximately 70% Interchangeability: All versions 10½''' with same movement height

1 RONDA powertech 500 and 762E, 763E Affordable metal movements for reliable quality watches Caliber ½''' Product Specifications Features Analog quartz movement Repairable metal watch movement Line powertech Caliber 509 Size 10½''' Version Swiss Made Swiss Parts 1 Jewels / nickel plated 1 Jewels / nickel plated Standard battery life 45 months Hand fitting height 1 Power saving mechanism with pullled out stem: Reduction of consumption approximately 70% Interchangeability: All versions 10½''' with same movement height 3.00 mm and stem height 1.50 mm Very powerful stepping motor Big date with quick change Date: Page: 1

RONDA powertech Caliber 509 10½''' Functions Technical Specifications Big date without direct change from 31 01 Diameter Total 23.90 mm Case fitting 23.30 mm Movement height 3.

2 RONDA powertech Caliber ½''' Functions Technical Specifications Big date without direct change from Diameter Total mm Case fitting mm Movement height 3.00 mm Height over standard battery 3.25 mm Movement rest 0.80 mm Height over stem 1.50 mm Length of stem travel 1.00 mm 3 hands Force to push the stem for screwed crown N Stem thread 0.90 mm Standard battery 371 Standard battery life 45 months Battery voltage 1.5 V Current consumption typical 1.28 μa (Date Mechanism not in Gear) Current consumption maximum 1.85 μa (Date Mechanism not in Gear) Useful torque second typical 11 μnm Useful torque minute typical 550 μnm Operating temperature 0 50 C Instantaneous rate 10/ +20 sec/month Resistance to magnetic fields 18.8 Oe Resistance against shock NIHS 9110 Date: Page: 2

3 min 2.6 max 2.75 min 3.4 max Ø 1.07 Ø Position pour extraire la tige Position zum entfernen der Stellwelle Position to remove the stem Ø 0 Côte fond de boîite Seite Gehäuseboden Case back side 1.00 avec date mit Datum with date Course tige Stellwelle Weg stem travel 6.87 S Pile Batterie Battery Ø 9.50 x Sécurité entre aiguille seconde et verre Sicherheit zwischen Sekundenzeiger und Glas Security between second hand and glass sans date ohne Datum without date : min 0.30 mm : min 0.30 mm : min 0.30 mm Le cadran doit être maintenu en hauteur par la boîte. Das Zifferblatt muss in der Höhe vom Gehäuse festgehalten werden. The dial must be held in the height by the case. Cage Uhrwerkgestell Frame RONDA 502, 503, 503S, 505, 505S, 507, 509 Issued 10½''' Modified 09 Feb Jun 2011 ÄA Released dh YES Tolerance Scale cs +/ 20 µm 10 : 1 (5 : 1) (A3H) Sous réserve de modifications Aenderungen vorbehalten Modifications reserved No

9 E 0.65 G Cylindrique Zylindrisch Cylindrical 0.35 H F B 6 E F H B Sous l'aiguille des heures Unter Stundenzeiger Under hour hand G Roue des heures Stundenrad Hour wheel Ø 0.4 max. Conicité Konizität 2% Conicity Roue des heures Stundenrad Hour wheel Ø Ø Minutenzeigerpassung Minute hand fitting Chaussée Minutenrohr Cannonpinion Ø Ø Aiguillage no Zeigerwerkhöhe Nr. Hand fitting height No Sekundenzeigerpassung Second hand fitting Pignon des secondes Sekundentrieb Second pinion Ajustement aiguille des minutes Ajustement aiguille des secondes Unter Minutenzeiger Under minute hand +4 Sous l'aiguille des minutes Height over dial seat Stundenzeigerpassung Hour hand fitting Epaisseur max. (peinture comprise) Max. Dicke (inkl. Farbe) Max. thickness (paint included) Aiguilles Cadran Zeiger Zifferblatt Hands Dial Sous l'aiguille des secondes Unter Sekundenzeiger Under second hand Ajustement aiguille des heures Ø Longueur Länge Length Dépassement Höhe über Zifferblattauflage Appui cadran Zifferblattauflage Dial seat Aig. des heures Stundenzeiger Hour hand Minutenzeiger Minute hand Aig. des minutes Sekundenzeiger Second hand Aig. des secondes Heures / minutes / secondes Stunden / Minuten / Sekunden Hours / minutes / seconds Lors de la pose d'aiguilles, le mouvement doit être soutenu. Beim Zeigersetzen muss das Werk abgestützt werden. The movement needs to be supported for hand setting. Masse / Masse / Weight * mg max µnm max Balourd / Unwucht / Unbalance * gmm 2 max. 0.4 Inertie / Massenträgheit / Inertia * max N * En cas de données différentes, veuillez contacter le service aprèsvente Force de chassage / Aufpresskraft / Force * Bei abweichenden Werten, bitte technischen Kundendienst anfragen Sous réserve de toutes modifications Aiguillages Zeigerwerkhöhen Hand fitting heights RONDA Aenderungen vorbehalten 10½''', 11½''' 507, 509, 517, D, D * In case of different values, please contact the customer service All modifications reserved Issued 23 Mai 2011 dh Modified 24 Mai 2011 ÄA dh Released Yes Tolerance Scale µm 20 : 1 (A3H) Sous réserve de modifications Aenderungen vorbehalten Modifications reserved No

10 0.25 Ø 0.4 max. G E F H B H G E F B Appui cadran Zifferblattauflage Dial seat Roue des heures Stundenrad Hour wheel Ø 0.5 Roue des heures Stundenrad Hour wheel +6 Ø Cylindrique Zylindrisch Cylindrical Conicité Konizität 2% Conicity Chaussée Minutenrohr Cannonpinion Ø Minutenzeigerpassung Minute hand fitting Pignon des secondes Sekundentrieb Second pinion Ø Sekundenzeigerpassung Second hand fitting +6 4 Aiguillage no Zeigerwerkhöhe Nr. Hand fitting height No Ajustement aiguille des secondes Sous l'aiguille des heures Unter Stundenzeiger Under hour hand Ajustement aiguille des minutes Unter Minutenzeiger Under minute hand +4 Sous l'aiguille des minutes Height over dial seat Stundenzeigerpassung Hour hand fitting Epaisseur max. (peinture comprise) Max. Dicke (inkl. Farbe) Max. thickness (paint included) Aiguilles Cadran Zeiger Zifferblatt Hands Dial Sous l'aiguille des secondes Unter Sekundenzeiger Under second hand Ajustement aiguille des heures Ø Longueur Länge Length Dépassement Höhe über Zifferblattauflage Aig. des heures Stundenzeiger Hour hand Minutenzeiger Minute hand Aig. des minutes Sekundenzeiger Second hand Aig. des secondes Heures / minutes / secondes Stunden / Minuten / Sekunden Hours / minutes / seconds Lors de la pose d'aiguilles, le mouvement doit être soutenu. Beim Zeigersetzen muss das Werk abgestützt werden. The movement needs to be supported for hand setting. Masse / Masse / Weight * mg max µnm max Balourd / Unwucht / Unbalance * gmm 2 max. 0.4 Inertie / Massenträgheit / Inertia * max N * En cas de données différentes, veuillez contacter le service aprèsvente Force de chassage / Aufpresskraft / Force * Bei abweichenden Werten, bitte technischen Kundendienst anfragen Sous réserve de toutes modifications Aiguillages Zeigerwerkhöhen Hand fitting heights RONDA Aenderungen vorbehalten 10½''', 11½''' 507, 509, 517, D, D * In case of different values, please contact the customer service All modifications reserved Issued 10 Mär 1999 gd Modified 20 Apr 2011 ÄA ps Released Yes Tolerance Scale µm 20 : 1 (A3H) Sous réserve de modifications Aenderungen vorbehalten Modifications reserved No

11 L2 D S L L3 L1 Ø d'encageage / GehäusepassungsØ / Case fitting Ø Tige de travail (intégrée dans le mouvement) Arbeitstellwelle (im Werk eingebaut) Working stem (implemented in the movement) No. d'article CO L L1 L2 L S D Couleur de la couronne Kronenfarbe Crown color Code brun braun brown Couronne normale Normale Krone Normal crown UN 8052 Boîte / Gehäuse / Case Tige (normale) / Stellwelle (normal) / Stem (normal) No. d'article L L1 L2 L3 S D Couronne vissée Geschraubte Krone Screwed crown Force min. Kraft min. 10 N Force min. Force max. Kraft max. 15 N Force max. Tige (à arracher) Stellwelle (Ausreissversion) Stem (extractable version) L2 L3 S D Rallonge de tige / Stellwelle Verlängerung / Stem extension No. d'article L4 L5 (min) L6 S1 S2 Issued S2 L1 D1 L S1 No. d'article D1 Tige Stellwelle Stem (dimensions / forces) (Dimensionen / Kräfte) (dimensions / forces) 05 Jul 2012 Modified Released Tolerance L5 L6 L4 RONDA 502, 503, 503S, 505, 505S, H, D, 507, 509 ÄA ds5212 YES 10:1 (A3) Scale ds5212 Sous réserve de modifications Aenderungen vorbehalten Modifications reserved No

12 Werkhalter T2 Portepièce T2 Movement holder T2 Verwendung & Übersicht Utilisation & Vue d ensemble Utilisation & Overview DOMVT004 Version: 2.1 Prozess: Änd.Dat.: , 5112, 5150, 5151, 5152, 5160, 5161, 5163, 5164, 5166, 5310, 5311, 5312, RTC, RHK Ermano, Pine Precision AF Switzerland SA, Horotec SA, Tschudin & Schneider Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group ZXX Poser les aiguilles Stellwelle entfernen T Diverses Enlever la tige Divers Hand setting Stem removal Various H ZXX.2A H ZXX.1T H ZXX.1A H ZXX.1T H 80XX.1A H 80XX.1T Z50 ZXX Z B 8040.N Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 1/9

70007999 H 7XXX.1A H 7XXX.1T 700X.B 700X.L 700X.N 700X.P Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden.

13 H 7XXX.1A H 7XXX.1T 700X.B 700X.L 700X.N 700X.P Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 2/9

14 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group Poser les aiguilles Stellwelle entfernen T Enlever la tige AlarmCheck P Contrôle d alarme Hand setting Stem removal Alarm check H 6XXX.1A H 6XXX.1T 6XXX.B 6XXX.D Swiss Made B/.C/.D/.E Swiss Parts H 5XXX.1A H 5XXX.1T H 5XXX.1P H 5XXX.FA H 5XXX.1T H 5XXX.1P 4XXX.B 5XXX.B 5XXX.C 5XXX.D 5XXX.E F 5XXX.F (4XXX.B) (5XXX.B) (5XXX.C) (5XXX.D) (5XXX.E) Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 3/9

15 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group Stellwelle entfernen T Poser les aiguilles Diverses Enlever la tige Divers Hand setting Stem removal Various H 35XX.1A H 35XX.1T H 106X.1A H 106X.1T 3520.D 3540.D Swiss Made Swiss Parts 6h h H A H T 1042 Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 4/9

Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group 1032 Poser les aiguilles Stellwelle entfernen T Diverses Enlever la tige Divers Hand setting Stem removal Various H 1032.1A H 1032.

16 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group 1032 Poser les aiguilles Stellwelle entfernen T Diverses Enlever la tige Divers Hand setting Stem removal Various H A H T H 101X.1A H 101X.1T H 100X.1A H 100X.1T Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 5/9

17 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group Poser les aiguilles Stellwelle entfernen T Diverses Enlever la tige Divers Hand setting Stem removal Various H 78X.1A H 78X.1T Swiss Made Swiss Parts H 77X.1A H 77X.1T Swiss Made Swiss Parts Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 6/9

18 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group Stellwelle entfernen Poser les aiguilles T Diverses Enlever la tige Divers Hand setting Stem removal Various H 76X.1A H 76X.1T E E Swiss Made Swiss Parts E E H 75X.1A H 75X.1T Swiss Made Swiss Parts 753 Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 7/9

Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group 712715 Stellwelle entfernen Poser les aiguilles T Diverses Enlever la tige Divers Hand setting Stem removal Various H 71X.1A H 71X.

19 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group Stellwelle entfernen Poser les aiguilles T Diverses Enlever la tige Divers Hand setting Stem removal Various H 71X.1A H 71X.1T Swiss Made Swiss Parts H 70X.1A H 70X.1T (706) Swiss Made 706 Swiss Parts H 706.1A H 70X.1T B Swiss Made 6h Swiss Parts 6h Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 8/9

Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group 582585 Poser les aiguilles Stellwelle entfernen T Diverses Enlever la tige Divers Hand setting Stem removal Various H 58X.1A H 58X.

20 Zeiger setzen A Kalibergruppe Groupe de calibre Calibre group Poser les aiguilles Stellwelle entfernen T Diverses Enlever la tige Divers Hand setting Stem removal Various H 58X.1A H 58X.1T H 51X.1A H 51X.1T H 50X.1A H 50X.1T Wichtig! Die Höhe der Abstützschrauben muss vor Beginn jeder Serie eingestellt werden. Veuillez ajuster l hauteur des vis de support au préalable de chaque série. Adjust height of support screws prior to each series. DOMVT004 / Version: 2.1 / Prozess: / Änd.Dat.: Seite 9/9

21 User's Manual English Movements Caliber RONDA powertech D / D H / H 507 / / 519 I II III Cal D / D I II III Cal H / H Position of rest (watch running) Pos. I Position of rest (watch running) Pos. II Quickchange correction for date The date can also be corrected during the daychanging phase between 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position II (watch still running). Turn the crown clockwise until the required date appears. Pos. II Quickchange correction for date The date can also be corrected during the daychanging phase between 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position II (watch still running). Turn the crown until the required date appears. Quickchange correction for 24hour display Pull the crown out to position II (watch still running). Turn the crown anticlockwise until the desired time appears. Pos. III Setting the time Pull the crown out to position III (watch stopped). Turn the crown, until the current time is displayed (remember the 24hour cycle). I II III Cal. 507 / 517 Pos. I You have decided to buy a watch, which was assembled by a watchmaker using a Ronda movement. Please note that no watches are produced or distributed under the Ronda brand. In case of repairs, guarantee claims and questions concerning the functioning of a watch, purchasers and consumers should contact their retailer or the watch manufacturer, for which the relevant information can be found in the sales or guarantee documentation provided with the watch. I II III Quickchange correction for day of the week The blocking time for the day of the week quickchange correction is from approx. 10 pm and midnight. The second language always first appears around 24.00hrs for about 2 hours, until the display changes to the required language. Pull the crown out to position II (watch still running). Turn crown anticlockwise until the desired day of the week appears in the required language. Push the crown back into position. Cal. 507 / 517 Pos. III Setting the time Pull the crown out to position III (watch stopped). Turn the crown, until the current time is displayed (remember the 24hour cycle). Cal. 509 / 519 Pos. I Position of rest (watch running) Pos. II Quickchange correction for date The date display comprises a 2disc system. For construction reasons, on the first day of a new month, the date must be set on 01 via the quickchange method passing through The date can also be changed during the daychanging phase between approx. 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position II (watch still running). Turn the crown clockwise until the required date appears. Pos. III Setting the time Pull the crown out to position III (watch stopped). Turn the crown, until the current time is displayed (remember the 24hour cycle). Applies to all calibers: Battery type: 371 / SR920SW (Ø 9.5 mm x 2.05 mm) Precision: +20 / 10 seconds per month 03 / 2015

22 User's Manual English Movements Caliber RONDA powertech D / D H / H 507 / / 519 I II III Cal D / D Powered by TCPDF ( I II III Cal H / H Position of rest (watch running) Pos. I Position of rest (watch running) Pos. II Quickchange correction for date The date can also be corrected during the daychanging phase between 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position II (watch still running). Turn the crown clockwise until the required date appears. Pos. II Quickchange correction for date The date can also be corrected during the daychanging phase between 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position II (watch still running). Turn the crown until the required date appears. Quickchange correction for 24hour display Pull the crown out to position II (watch still running). Turn the crown anticlockwise until the desired time appears. Pos. III Setting the time Pull the crown out to position III (watch stopped). Turn the crown, until the current time is displayed (remember the 24hour cycle). I II III Cal. 507 / 517 Pos. I You have decided to buy a watch, which was assembled by a watchmaker using a Ronda movement. Please note that no watches are produced or distributed under the Ronda brand. In case of repairs, guarantee claims and questions concerning the functioning of a watch, purchasers and consumers should contact their retailer or the watch manufacturer, for which the relevant information can be found in the sales or guarantee documentation provided with the watch. I II III Quickchange correction for day of the week The blocking time for the day of the week quickchange correction is from approx. 10 pm and midnight. The second language always first appears around 24.00hrs for about 2 hours, until the display changes to the required language. Pull the crown out to position II (watch still running). Turn crown anticlockwise until the desired day of the week appears in the required language. Push the crown back into position. Cal. 507 / 517 Pos. III Setting the time Pull the crown out to position III (watch stopped). Turn the crown, until the current time is displayed (remember the 24hour cycle). Cal. 509 / 519 Pos. I Position of rest (watch running) Pos. II Quickchange correction for date The date display comprises a 2disc system. For construction reasons, on the first day of a new month, the date must be set on 01 via the quickchange method passing through The date can also be changed during the daychanging phase between approx. 10 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position II (watch still running). Turn the crown clockwise until the required date appears. Pos. III Setting the time Pull the crown out to position III (watch stopped). Turn the crown, until the current time is displayed (remember the 24hour cycle). Applies to all calibers: Battery type: 371 / SR920SW (Ø 9.5 mm x 2.05 mm) Precision: +20 / 10 seconds per month 03 / 2015

RONDA normtech 700 & Caliber 706.B 10½''' Long battery-life and special functionality. Features. Product Specifications. Analog quartz movement

RONDA normtech 700 & Caliber 706.B 10½''' Long battery-life and special functionality. Features. Product Specifications. Analog quartz movement ROND normtech 700 & 6000 Long batterylife and special functionality Caliber 10½''' Product Specifications Features nalog quartz movement Repairable metal watch movement Line normtech Caliber Size 10½'''