User s Manual DARE TO LIV

Size: px

Start display at page:

Download "User s Manual DARE TO LIV"

Hollie Burke
6 years ago
Views:

1 R TO LV

2 TL OF ONTNTS PG PG 4 PG 7 PG 9 PG 4 PG 6 PG 9 RNG FOR YOUR LV SWSS WTH FQ PG PG

3 User s Manual TH MOVMNT SRPTON: Made in Switzerland Features precision Swiss Quartz nalog Movement (RON powertech aliber 55) Powered by a battery PRFORMN: Standard battery life of 45 months SPLY: Hours-minutes-seconds ate window PRTS OF YOUR NW WTH Hour hand Minute hand Second hand ate display rown STTNG TH TM Position of rest (watch running) Quick-change correction for date - The date can also be corrected during the day-changing phase between 0 pm and midnight. - The date of the following day has to be set, because no automatic date change takes place at midnight. - Pull the crown out to position (watch still running). - Turn the crown clockwise until the required date appears. Setting the time - Pull the crown out to position (watch stopped). - Turn the crown, until the current time is displayed (remember the 4-hour cycle). - Push and screw down the crown back into position.

4 User s Manual TH MOVMNT SRPTON Made in Switzerland Features precision Jewel Gold Plated Swiss Quartz Movement (RON startech aliber 5040.) Powered by a battery PRFORMN: Standard battery life of 54 months SPLY & FUNTONS: /0 second eyes hronograph enter stop second (/ sec) /0 seconds up to 0 minutes 0 minute counter 0 hour counter and SPLT functions ate window Small second PRTS OF YOUR NW WTH F Hour hand Minute hand Second-hand subdial ate display rown J F G 0 minute counter to chronograph subdial Second hand to chronograph H /0 of a second hand to chronograph subdial G H J Start/stop function Reset push button 4

5 STTNG TH TM Unscrew and pull the crown out to position. Turn the crown to set the time. Push the crown back to position and tightly screw it back in.* *Failure to tightly screw it back in may result in water damage. STTNG TH T Unscrew and pull the crown out once to position. Turn the crown to set the date. Push the crown back to position and tightly screw it back in. *Failure to tightly screw it back in may result in water damage. 5

6 HRONOGRPH SPLY STRT STOP RST JUSTNG TH HRONOGRPH HNS Unscrew crown and Hold both top and bottom pull it twice to position. buttons until the second hand of the chronograph does a complete turn indicating you are in set up mode. Use the top button to adjust any of the chronograph hands. Use the bottom button to switch between the different hands. 4 To leave set up mode, push the crown back to position and tightly screw it back in.* *Failure to tightly screw it back in may result in water damage. 6

7 User s Manual TH MOVMNT SRPTON: Made in Switzerland Features precision 6 Jewel Swiss utomatic Movement (Sellita SW00) Functions without a battery; powers automatically with the movement of your arms PRFORMN: alance frequency of 8,800 vibrations per hour (4 Hz) Power reserve of 8 hours SPLY: Hours minutes seconds ate window PRTS OF YOUR NW WTH Hour hand Minute hand Second hand ate display rown 7

8 STTNG TH TM & T V POSTON Screwed in and flush with the case POSTON Unscrewed / manual winding position POSTON Rapid date change POSTON V Time change NSTRUTONS: Make sure that your watch is perfectly dry. Unscrew the crown and move it to position to manually wind the watch 0 times. Move it to position to set the date. Move it to position V to set the time. void changing the date between 8:00 pm and 4.00 am. Once the changes are made, push the crown back in and screw it down against the case to preserve its water-resistance. When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (in this case, 8 hours) is exhausted and the watch stops. To restart it, unscrew the crown to position and wind the movement manually by turning the crown 0-40 times. This will give it a sufficient power reserve to function normally. 8

9 TH MOVMNT User s Manual SRPTON Made in Switzerland Features precision Swiss Quartz nalog Movement (RON xtratech aliber Z60) Powered by a battery PRFORMN Standard battery life of 50 months SPLY & FUNTONS eyes hronograph enter stop second (/ sec) 0 minute counter and SPLT functions ay indicator ate Small second PRTS OF YOUR NW WTH F Hour hand Minute hand J F G H Second-hand subdial ate display rown ay indicator subdial Second hand to chrongraph 0 minute counter to chronograph subdial Start/stop function G H J Reset push button 9

10 STTNG TH TM Pull out the crown to position (the watch stops). Turn the crown until you reach the correct time. * Push the crown back into position. PLS NOT: n order to set the time to the exact second, the crown must be pulled out when the second hand is in position "60." Once the hour and minute hands have been set, the crown must be pushed back into position at the exact second. STTNG TH T - QUK MO Pull out the crown to position (the watch continues to run). Turn the crown counterclockwise until the correct date appears. Push the crown back into position. PLS NOT: uring the date changing phase between approx. 09:45 PM and :00 PM; the date must be set to the date of the following day. 0

11 STTNG TH T, Y OF TH WK & TM xample: - ate / time on the watch: 7 / 0:5 /MON - Present date / time: / 0:5 /THU Pull out the crown to position (the watch stops). Turn the crown clockwise until yesterday s day of the week W appears. Push the crown to position. 4 Turn anti-clockwise to get to yesterday's date. 5 * Pull out the crown to position (the watch stops). 6 Turn the crown anticlockwise until the correct date and day of the week THU appears. 7 ** ontinue to turn the crown anticlockwise until the correct time 8:5 PM appears. 8 Push the crown back into position. PLS NOT: * To set your watch to the exact second, please refer to the chapter entitled «setting the time». ** Please observe the M/PM clock rhythm.

12 HRONOGRPH: S FUNTON (Start / Stop / Reset) Start: Press push-button. Stop: to stop the timing, press push-button once more and read the chronograph counters: 0 min/8 sec Zero positioning: Press push-button. (The chronograph hands will be reset to their zero positions.) HRONOGRPH: UMULT TMNG 4 Start: (start timing) Stop: (e.g. 5 min 5 sec following ) Restart: (timing is resumed) 4 * Stop: (e.g. 5 min sec following ) = 0 min 7 sec (The accumulated measured time is shown) 5 Reset: The chronograph hands are returned to their zero positions. 5 Please note: * Following 4, the accumulation of the timing can be continued by pressing push-button (Restart / Stop, Restart / Stop, ).

13 HRONOGRPH: NTRMT OR NTRVL TMNG Start: (start timing) isplay interval: e.g. 0 minutes 7 seconds (timing continues in the background) Making up the measured time: (the chronograph hands are quickly advanced to the ongoing measured time). 4 Stop: (Final time is displayed.) 5 Reset: The chronograph hands are returned to their zero position Please note: * Following, further intervals or intermediates can be displayed by pressing push-button (display interval / make up measured time,...). JUSTNG TH HRONOGRPH HNS TO ZRO POSTON xample: One or several chronograph hands are not in their correct zero positions and have to be adjusted (e.g. following a battery change). Pull out the crown to position (all chronograph hands are in their correct or incorrect zero position.) Keep push-buttons and depressed simultaneously for at least seconds (the second counter hand rotates by 60 > corrective mode is activated. ) djusting the second counter hand Single step x short ontinuous long djusting the next hand djusting the minute counter hand (position 6h) Single step x short ontinuous long Returning the crown to position Termination of the chronograph hands adjustment (can be carried out at any time).

14 - User s Manual TH MOVMNT SRPTON SPLY & FUNTONS Made in Switzerland Hours-minutes-seconds Features precision 6 Jewel Swiss utomatic ate window Movement (Sellita SW00) Functions without a battery; powers automatically with the movement of your arms PRFORMN alance frequency of 8,800 vibrations per hour (4 Hz) Power reserve of 8 hours PRTS OF YOUR NW WTH Hour hand Minute hand Second counter ate display rown 4

15 STTNG TH TM & T POSTON Screwed in and flush with the case POSTON Rapid date change POSTON Time change NSTRUTONS: Make sure that your watch is perfectly dry. Manually wind in position 0 times. Move to position to set the date. Move to position to set the time. void changing the date between 8:00 pm and 4:00 am. Once the changes are made, push the crown back in against the case to preserve its water resistance. When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (in this case 8 hours) is exhausted and the watch stops. To restart it, pull the crown out to position and wind the movement manually by turning the crown 0-40 times. This will give it a sufficient power reserve to function normally. 5

16 TH MOVMNT - User s Manual SRPTON: Made in Switzerland Features precision 5 Jewel Gold Plated Swiss utomatic hronograph Movement (Sellita SW500) Functions without a battery; powers automatically with the movement of your arms PRFORMN: alance frequency of 8,800 vibrations per hour (4 Hz) Power reserve of 48 hours SPLY & FUNTONS: Hours-minutes-seconds 60-second chronograph 0-minute counter -hour counter ate and day in window PRTS OF YOUR NW WTH Watch functions Hour 6 Minute 4 Second ate rown: time, date setting hronograph functions second counter (center seconds) 0-minute counter 7 7 -hour counter start/stop button zero reset button 6

17 STTNG TH TM & T Position : Normal position and manual winding This position allows you to wind your watch manually by rapidly rotating the crown. Pull the crown out once more to position. Position : Rapid date correction Turn the crown clockwise to correct the date. Warning: o not change the date between 8 p.m. and a.m. ttempting to use the rapid date correction during this period could damage the calendar mechanism. Position : Time correction Turn the crown forward or backward according to the desired correction. mportant: To preserve your watch's water-resistance, always push the crown back into position after completing all settings. SNGL TMNG aution: efore each timing, the hands must be at zero. f necessary, press button.. Start: button (STRT). Stop: button (STOP) > Time read-out. Reset to zero: button 7

18 UMULTV TMNG This function measures several consecutive times, adding them to give the total measured time. aution: efore each timing, the hands must be at zero. f necessary, press button.. Start st time: button (STRT). Stop st time: button (STOP) > Read st time. Start nd time: button (STRT) 4. Start nd time: button (STOP) > Read st and nd times, etc 5. Reset to zero: button 8

19 User s Manual TH MOVMNT SRPTON: Made in Switzerland Features precision Swiss Quartz 4 Hours / GMT + ual Time Movement (RON powertech aliber 55.4H) Powered by a battery PRFORMN: Standard battery life of 45 months SPLY & FUNTONS: Hours-minutes-seconds ate window 4 hours by hand GMT function PRTS OF YOUR NW WTH F Hour hand Minute hand Second counter ate display rown GMT hand F 9

20 STTNG TH TM & T Position : Position of rest (watch running) Position : Quick-change correction for date The date can also be corrected during the day-changing phase between 0 pm and midnight. The date of the following day has to be set, because no automatic date change takes place at midnight. Pull the crown out to position (watch still running). Turn the crown clockwise until the required date appears. Push the crown back into position. Quick-change correction for 4-hour display Pull the crown out to position (watch still running). Turn the crown counterclockwise until the desired time appears. Push the crown back into position. Pos. Setting the time Pull the crown out to position (watch stopped). Turn the crown, until the current time is displayed (remember the 4-hour cycle). Push the crown back into position. 0 0

21 RNG FOR YOUR LV SWSS WTH LNNG lean your watch regularly as follows; this will maintain its aesthetic appeal and ensure it stays in good working order. nsure that the crown is completely screwed down before you get started. f the seals in your watch have been tested and changed within the last months by LV - Swiss Watches or an authorised LV - Swiss Watches service center, then you may use a soft brush with mildly soapy water to clean case, then rinse it off with clear water and dry it with a soft cloth. f your watch is fitted with a fabric, alligator, leather or python skin strap, take care not to get it wet. f you have any doubts whatsoever about the water resistance of your watch, simply clean it with a soft brush, and then dry it. void contact with detergents, solvents, cosmetics or any other chemical product, as these may damage the water-resistant gaskets and the bracelet. ONNSTON small amount of condensation may form under the crystal of your watch if there is a sudden temperature change. This mist will disappear by itself and will not impact the watch function. f the condensation persists, please contact LV - Swiss Watches or an authorized LV - Swiss Watches dealer. WTR RSSTN Given the nature of rubber seals, water resistance can not be a permanent condition. The rubber seals are designed to prevent water entry, however the fact that they are under constant pressure means that over time they will deteriorate. t is therefore necessary, throughout your watch s warranty coverage period, to have the water-resistance tested by LV - Swiss Watches or an authorized LV - Swiss Watches repair center every two years after the date of purchase. These tests are conducted free of charge. The nternational Warranty does not cover problems with water resistance and associated consequences if periodic water-resistance tests have not been conducted every two years following the date of purchase. RYSTLS The crystal in your watch may be coated with an anti-reflective treatment (single or double), to make the time more readable. Marks may appear due to normal wear and tear of the watch, and are not covered by the nternational Warranty. The coating will be sufficient if you use your watch normally.

22 STRPS N LTHR, FR N PYTHON/LLGTOR SKN e sure to avoid letting the watch get into contact with water. Please note that no matter how careful you are with leather, it is a living material and its color will naturally (slightly) fade or darken over time. Leather straps should be cleaned with a dry, soft cotton cloth. void any abrasive products during cleaning. SLON STRPS Since silicone attracts dust, there is an anti dust coating on the band which makes the silicone strap matte. t is normal for that coating to start coming off after approximately 6 months of everyday wear. The strap will begin to appear shiny as time progresses. FQ oes the /0 of a second dial of the chrono stop after 0 seconds? t only stops SPNNNG after 0 secs, but it is still calculating; the indication will show once you stop/pause the stop watch. ve been setting the date at all times of the day and night but it always changes date at noon instead of midnight. What should do? Your watch set to PM instead of M it s a hour clock. So for example, your M is set to PM. The date changes between PM and M. You simply need to bring the time forward by hours. How do get the full effect of the luminescence on my watch? n order to get the full effect of the luminescence, the watch needs to be in direct sunlight for at least hours.

23 What does fully wound mean (on my automatic watch)? LV automatic watches have a 8 to 48-hour power reserve, meaning that when fully wound and not worn, a LV automatic watch will run for approximately 8 to 48 hours before stopping. t's important to understand what fully wound means, as some people wrongly assume that just by wearing an automatic mechanical watch it will fully wind up by itself. That is not the case. The truth is that an automatic watch needs first to be fully wound and charged up by turning the crown. Then, by wearing the watch, the automatic movement will continue to hold the charge. oes my level of activity make a difference to how long my LV automatic watch will remain charged? YS! Since the automatic watch gets its charging power from a rotating mass (aka Oscillating Weight) inside the watch that relies on the movement of the wrist, your level of activity will determine how long the charge will hold. Less active people might find that their watch has stopped because there is not enough movement to swing the rotating mass. an a LV automatic watch be 'over-wound'? YS! ach watch has its maximum charge, meaning that the mainspring (power source) can only hold so much charge. Overwinding a watch could damage it, so it is always recommended to follow the manufacturer's guide on how much you should wind the watch up the first time you put it on. For your LV automatic watch, we recommend you wind the watch 0 times the first time. oes my LV automatic watch need to be wound if don't don't wear it, even if it's for a short period of time? Yes! When you don't wear the watch (sleeping, shower) the watch is not active, and power will decrease during that period, so over a period of time, you might need to use the crown to bring the power back up.

Operating manual for Air Commando automatic watch/ Calibers , , , 2892A2

Operating manual for Air Commando automatic watch/ Calibers 2893-2, 2836-2, 2824-2, 2892A2 Crown (A) screwed down tightly Crown (A) pulled one click out Crown (A) pulled two clicks out Position 1 Position