Quick Reference. Daily Cleaning Procedures Pages 3-8 Stopping Conditions & Recovery Steps Pages 9-20
|
|
- Adela Sparks
- 6 years ago
- Views:
Transcription
1 Quick Reference for Daily Cleaning Procedures Pages 3-8 Stopping Conditions & Recovery Steps Pages Feehanville Drive Mt. Prospect, IL Telephone: (847) Fax: (847) CUMMINS-ALLISON CORP. ALL RIGHTS RESERVED. PRINTED IN USA Factory Part Field Form Rev. F 11/2009
2 Quick Reference for Machine Diagram Daily Cleaning Procedures Daily cleaning of the JetScan currency scanner is recommended to ensure maximum productivity and reliability, especially for high-volume applications, as well as for those processing highly circulated (dirty) currency. Follow these steps, which only will take a few minutes. Recommended Cleaning Materials Thickness adjustment dial Hopper Feed roller Hopper guides Feed roller Feeder plate Simple Green, the recommended cleaning agent, can be an eye irritant. Avoid eye contact. If eye contact occurs, flush eye(s) with cool water for 5 minutes remove contact lenses if present continue flushing eye(s) with cool water for 15 more minutes. If irritation persists, consult physician. Individuals with sensitive skin should rinse hands after using. Display Function keys Stacker wheels Stacker Function keys Power switch and power cord on rear of unit Stacker sensor Simple Green Safety Towels*. (Part number: ) A pre-moistened towelette or pre-moistened microfiber towel also may be used. If using Simple Green concentrate, dilute to: 1 ounce of Simple Green per 8 ounces of water. Microfiber towels. (Part number: ) A clean, soft eraser. (Part number: ) Vacuum. (Part number for standard vacuum: ; part number for heavy-duty vacuum: ) * Simple Green is a registered trademark of Sunshine Makers Inc. For a material-safety-data sheet, see Stacker mirror Daily Cleaning High voltage inside. Risk of electric shock. Turn power OFF and unplug power cord from machine before cleaning. 2 D A I L Y C L E A N I N G D A I L Y C L E A N I N G 3
3 4 Remove feeder plate as shown at left. To avoid machine/component damage and potential voiding of existing warranty, follow these procedures: Only use specified tools for cleaning machine. Never use metal tools. If using Simple Green concentrate, dilute to: 1 ounce of Simple Green per 8 ounces of water. Never use cleaners containing ammonia. Ammonia may remove labels from machine. Never spray cleaners directly on machine components. Use a microfiber towel to clean 5 the black start sensor at the top, middle of the feeder plate. Start sensor Use a Simple Green Safety 6 Towel to remove dirt buildup from the upper and lower aluminum rollers. To reach all exposed surfaces, rotate the large, black feed rollers forward (direction of note flow). (See Helpful Hint below.) If there is heavy buildup on the aluminum rollers, remove it with a clean, soft eraser as shown. Turn power OFF 1 2 (rocker panel to 0). Disconnect power cord from the rear of the JetScan. Helpful Hint: Rotating the large, black feed rollers will rotate all other shafts and rollers in the machine. These rollers can be rotated in either direction by using fingers. Generally, the top of these rollers should be rotated forward (direction of note flow), so any dirt or stray material is moved out of the unit. 3 Remove hopper extension. Center rubberdrive tire Black feed rollers 4 D A I L Y C L E A N I N G D A I L Y C L E A N I N G 5
4 Use a Simple Green Safety Towel to 7 clean all rubber sections of the large, black feed rollers. Rotate the rollers. 11 Clean exterior surfaces as necessary with a Simple Green Safety Towel. Also clean the flat, center rubber-drive tire. Flat, center rubber-drive tire Use a microfiber towel or vacuum 8 to remove any remaining dust in the bottom stacker. 12 Replace hopper extension. Use a microfiber towel to clean the stacker- 9 sensor lens located in the stacker tray between the two gray stacker wheels. Clean the stacker mirror located directly across from the stacker-sensor lens. 13 Carefully reconnect power cord. Stacker-sensor lens Stacker mirror Replace feeder plate. Insert curved edge 10 of feeder plate first. Gently press down on feeder plate until it snaps into position. 14 Turn power ON (rocker panel to I). Curved edge 15 Perform a test run with some currency. 6 D A I L Y C L E A N I N G D A I L Y C L E A N I N G 7
5 How to Order Cleaning Supplies Desktop-Currency-Equipment Cleaning Kit (Part Number: ) The kit contains: 2 stick erasers 20 microfiber towels 50 Simple Green Safety Towels Quick-reference guides The following items are available for purchase through Cummins-Allison Corp. Items Sold Separately 1 stick eraser. (Part number: ) 20 microfiber towels. (Part number: ) 50 Simple Green Safety Towels. (Part number: ) Vacuum. (Part number for standard vacuum: ; part number for heavy-duty vacuum: ) Power-Adapter Cable (Part Number: ) This cable allows the power cord that is disconnected from the rear of the JetScan to be used to power the vacuum. To place an order in the United States, please call , visit or contact your local Cummins representative. To place an order outside of the United States, contact your local Cummins representative. Quick Reference for Stopping Conditions and Recovery Steps In operation, the JetScan currency scanner display will advise users of conditions that have caused the machine to stop. These stopping conditions require attention. Stopping-condition displays are shown in alphabetical order on the following pages, along with brief explanations and steps that should be taken to continue operation. A sample is shown below. Explanation JetScan may have processed two or more notes as one. SAMPLE Display (Listed alphabetically) Remove all notes from the bottom stacker and place them on the top hopper. Press Cont. If an alarm repeatedly occurs, adjust the gray thickness dial located on top of the machine behind the hopper. Rotate in the negative (-) direction as indicated by numbers on front of the thickness dial. Necessary steps to continue operation 8 D A I L Y C L E A N I N G S T O P P I N G C O N D I T I O N S & R E C O V E R Y 9
6 Machine Diagram Stopping Conditions and Recovery Steps Screens Listed Alphabetically Hopper Thickness adjustment dial JetScan may have processed two or more notes as one. Feed roller Display Function keys Stacker wheels Stacker Hopper guides Feed roller Feeder plate Function keys Power switch and power cord on rear of unit Stacker sensor Remove all notes from the bottom stacker and place them on the top hopper. Press Cont. If an alarm repeatedly occurs, adjust the gray thickness dial located on top of the machine behind the hopper extension. Rotate in the negative (-) direction as indicated by the numbers on the front of the thickness dial. JetScan has identified a note that is different than those it has been processing while using sort mode. This first note of the different denomination is the top note in the lower stacker. Stacker mirror Remove all notes from the bottom stacker. Separate the top note from the remaining notes. Put the top note in the location for its denomination. Put all the other notes (they are all the same) in the location for their denomination. JetScan automatically will restart. Display Clear key Cont key JetScan may have processed two or more notes as one. Denomination value keys Remove all notes from the bottom stacker and put them on the top hopper. Press Cont. If an alarm repeatedly occurs, adjust the gray thickness dial on top of the machine behind the hopper extension. Rotate in the negative (-) direction as indicated by the numbers on the front of the thickness dial. 10 S T O P P I N G C O N D I T I O N S & R E C O V E R Y S T O P P I N G C O N D I T I O N S & R E C O V E R Y 11
7 JetScan has identified a note that is incorrectly faced. Users should either: Face the note, replace it in the bottom stacker, and press the appropriate denomination value key. Correctly face the note, return it to the top hopper, and press Cont. 1 Remove all notes from the top hopper and bottom stacker. Remove the hopper extension, as shown in inset. Remove the feeder plate, as shown at right. Currency or possibly foreign material is jammed in the paper path and must be removed. Remove feeder plate by lifting with fingers in the two depressions. When notes are removed from the bottom stacker, the display will show: Do not use tools or metal devices to remove jammed currency from paper path. Use of tools or metal devices could cause machine damage and void existing warranty. For proper removal of jammed currency, see step No. 2 on Page Raise the two red, plastic T handles at the same time and hook them onto the metal shaft. Then either: Move jammed notes forward/ back by manually rotating the large, black feed rollers. (See Helpful Hint on Page 5.) Press Clear to slowly move the feeder forward. Press Strap to slowly move the feeder in reverse. Remove all jammed notes and foreign material. 12 S T O P P I N G C O N D I T I O N S & R E C O V E R Y S T O P P I N G C O N D I T I O N S & R E C O V E R Y 13
8 Unhook the two red, plastic 3 T handles from the metal shaft and lower them at the same time. These two screens will sequentially flash: This screen could show any of these messages: NO CALL NO CALL SKEW NO CALL* NO CALL** NO CALL*** JetScan cannot recognize the denomination of a note and has stopped. This NO CALL note is the top note in the bottom stacker. This note has not been included in the count. Replace feeder plate. Insert 4 curved edge of feeder plate first. Gently press down on feeder plate until it snaps into position. Curved edge Inspect the top note in the bottom stacker. DO NOT remove all notes from the bottom stacker. To count the note, keep the note in the bottom stacker and then enter its denomination using the correct denomination value key ($1, $5, $10, etc.). JetScan will start, and this note will be added to the count. To not count the note, remove it and press Cont. JetScan will re-start. The removed document WILL NOT be added to the count. If the note is not mutilated, it may be returned to the top hopper for reprocessing. Replace the hopper 5 extension. Press Cont. Rerun all notes that were in the top hopper and bottom stacker at the time of the jam. JetScan has identified a note that is incorrectly oriented. Users should either: Orient the note and return it to the bottom stacker, then press the appropriate denomination value key ($1, $5, $10, etc.). Correctly orient the note and return it to the top hopper and press Cont. 14 S T O P P I N G C O N D I T I O N S & R E C O V E R Y S T O P P I N G C O N D I T I O N S & R E C O V E R Y 15
9 JetScan has detected a note of a different denomination from those being counted and has stopped. This stranger note is the top note in the bottom stacker. This note has not been included in the count. ONLY ON MODELS 4062, 4063, 4064, 4065, 4068: These two screens will sequentially flash: This line could show different suspect document (SD) codes. For details, refer to the SD code chart below. Remove the top note in the bottom stacker and press Cont. JetScan sensors have detected a possible counterfeit note. JetScan has stopped with this note as the top note in the bottom stacker. This note has not been included in the count. These two screens will sequentially flash: The wrong denomination value key was pressed. Inspect the top note in the bottom stacker. Next there are two options: If it is identified as a counterfeit, place it aside and press Cont. It will not be part of the count. If the note is determined to be good, return it to the bottom stacker and press the appropriate denomination value key. JetScan will re-start, and this note will be added to the count. Review the top note in the bottom stacker and press the correct denomination value key. SD Code M Possible Causes Incorrect-ink error Worn note The number of notes in the bottom stacker has reached the preset strap limit. Remove the notes from the bottom stacker. JetScan automatically will continue if there are additional notes remaining in the top hopper. UV FL Incorrect-currency paper Soiled note Incorrect-currency paper Machine-washed note Taped note 16 S T O P P I N G C O N D I T I O N S & R E C O V E R Y S T O P P I N G C O N D I T I O N S & R E C O V E R Y 17
10 ONLY ON MODEL 4069: These two screens will sequentially flash: This line could show different suspect document (SD) codes. For details, refer to the SD code chart at right. SD Code S1 S2 S3 Possible Causes Incorrect-currency paper Soiled note Incorrect-currency paper Machine-washed note Taped note Incorrect-currency paper Soiled note JetScan sensors have detected a possible counterfeit note. JetScan has stopped with this note as the top note in the bottom stacker. This note has not been included in the count. Inspect the top note in the bottom stacker. Next there are two options: If it is identified as a counterfeit, place it aside and press Cont. It will not be part of the count. If the note is determined to be good, return it to the bottom stacker and press the appropriate denomination value key. JetScan will re-start, and this note will be added to the count. S5 S8* Incorrect-ink error Worn note Note failed advanced counterfeit test Worn note Incorrect-ink error S10* Genuine AK Series $100 Worn note S11* Incorrect-ink error Worn note * These error codes are most common among super notes, which are high-quality counterfeits. Notes producing these codes should be carefully examined. S1 S2 S3 S5 S8 S10 S11 Lower probability of a super note, but commonly identifies poor-quality counterfeit notes Higher probability of a super note 18 S T O P P I N G C O N D I T I O N S & R E C O V E R Y S T O P P I N G C O N D I T I O N S & R E C O V E R Y 19
11 These three screens will sequentially flash: JetScan is indicating there possibly is a problem with the right, left or both doubles sensors. Press Cont to attempt continued operation. If the alarm occurs again, clean the machine by following the daily cleaning procedures at the front of this booklet. If the message continues to appear, call a local Cummins service representative. These four screens will sequentially flash: JetScan is indicating there possibly is a problem with the ultraviolet (UV) bulb ( BECOMING WEAK, INTENSITY OUT OF RANGE or UNRELIABLE ). Press Cont to continue operation. If the machine is not equipped with ultraviolet (UV), be sure to turn the feature off in SETUP (see JetScan operating instructions). If the message continues to appear, contact a local Cummins service representative. 20 S T O P P I N G C O N D I T I O N S & R E C O V E R Y
product manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
More informationRichter Optica. Instructions for Model: S850 Stereo Zoom Microscope
Richter Optica info@richter-optica.com Instructions for Model: S850 Stereo Zoom Microscope Microscope Head Focus Knob Stage Clips Zoom Knob C-Mount Adapter Eyepiece Focusing Holder Focusing Holder Set
More informationINFRARED THERMOMETER Model : TM-959
LED target light, Emissivity adjustment INFRARED THERMOMETER Model : TM-959 Your purchase of this I N F R A R E D THERMOMETER marks a step forward for you into the field of precision measurement. Although
More informationTHE MASTER 2 SET UP AND OPERATION MANUAL TABLE OF CONTENTS
THE MASTER 2 SET UP AND OPERATION MANUAL TABLE OF CONTENTS SAFETY 2 UNPACKING 2 MACHINE MOUNTING 3 MACHINE MOUNTING DIAGRAM 4 AUTOMATIC SEQUENCING 4 MODE OF OPERATION 5 INSTALLING PUSHBUTTONS 5 PRICING
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationINSTRUCTION MANUAL Milwaukee Refractometer MA881 Refractometer for Invert Sugar Measurements
www.milwaukeeinst.com INSTRUCTION MANUAL Milwaukee Refractometer MA881 Refractometer for Invert Sugar Measurements www.milwaukeeinst.com 1 Instruction Manual MA881 Refractometer for Invert Sugar Measurements
More informationMust Read Before Installation TadPoleTM Safety and Warnings
Must Read Before Installation TadPoleTM Safety and Warnings The recommendations, requirements, rules, and instructions of your Vehicle's Roof-Top Rack System should ALWAYS be followed. The TadPole TM,
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationFischer Instruments Chrome and Black Wood Base Weather Station with Barometer, Hygrometer, Thermometer and Quartz Clock User Manual
Fischer Instruments 1535-06 Chrome and Black Wood Base Weather Station with Barometer, Hygrometer, Thermometer and Quartz Clock User Manual Table of Contents 1. Introduction... 2 2. Care and Cleaning...
More informationSTUDENT LABORATORY Plant Respiration and Photosynthesis
Pasco Plant Respiration and Photosynthesis Page 1 of 5 STUDENT LABORATORY Plant Respiration and Photosynthesis Grade (Out of 20): Lab Credits: Full Name: Lab Section: Lab Instructor: Lab Date: Credit:
More informationph electrode Instruction Manual For use with the RAH-210 & RPH-250
ph electrode Instruction Manual For use with the RAH-210 & RPH-250 The information in this manual was current at the time of printing. The most current versions of all Hydro Instruments manuals can be
More informationHow to Check Your G4 Spread Pattern
How to Check Your G4 Spread Pattern MANUAL NUMBER: EFFECTIVE 04/0 0 6TH AVE SW CEDAR RAPIDS, IA 5404-05 PHONE FAX (9) 86-50 www.new-leader.com Copyright 0 Highway Equipment Company, Inc. Spread HeaderPattern
More informationMost people think of volcanoes as destructive. The high temperature
37 Volcanic Landforms M O D E L I N G Most people think of volcanoes as destructive. The high temperature of volcanic lava can burn almost everything in its path. Volcanoes also release large amounts of
More informationINSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationC A S S I N I. MODEL : C EQ3 900mm X 135mm COSMO BRANDS INC.
C A S S I N I MODEL : C-900135EQ3 900mm X 135mm COSMO BRANDS INC. WWW.COSMOSOPTICS.COM 2 C A S S I N I C-900135EQ3 TELESCOPE OPERATING INSTRUCTIONS INTRODUCTION CONGRATULATIONS ON YOUR PURCHASE OF THE
More informationFischer 1508BTH-45 5" Brass Barometer with Temperature & Humidity User Manual
Fischer 1508BTH-45 5" Brass Barometer with Temperature & Humidity User Manual Table of Contents 1. Introduction... 2 2. Care and Cleaning... 2 3. Barometer Operation... 2 3.1 How the aneroid barometer
More informationTo determine relative oxidizing and reducing strengths of a series of metals and ions.
Redox Reactions PURPOSE To determine relative oxidizing and reducing strengths of a series of metals and ions. GOALS 1 To explore the relative oxidizing and reducing strengths of different metals. 2 To
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationwww.vostok-europe.com CONTENTS OF THE BOOKLET I USER'S MANUAL FOR ALL TYPES OF MECHANICAL WATCHES... 03 II WATER RESISTANCE... 06 III WATCHES WITH 2432 MOVEMENT... 08 IV WATCHES WITH 2426 MOVEMENT... 14
More informationHL-800K Infrared Laser Thermometer. -50 C to +800 C (13:1 ratio) User Manual
HL-800K Infrared Laser Thermometer -50 C to +800 C (13:1 ratio) User Manual TABLE OF CONTENTS INTRODUCTION... 3 FEATURES... 3 WIDE APPLICATION RANGE... 3 SAFETY... 3 DISTANCE & SPOT SIZE... 4 SPECIFICATIONS...
More information1. Electrostatic Lab [1]
1. Electrostatic Lab [1] Purpose: To determine the charge and charge distribution on insulators charged by the triboelectric effects and conductors charged by an Electrostatic Voltage Source. Equipment:
More informationDHS1900 DHS3000 High Temperature Hand Held Infrareds User Manual
DHS1900 DHS3000 High Temperature Hand Held Infrareds User Manual WD1063 Rev B Revised 02/23/15 Wahl Instruments Inc. 234 Old Weaverville Road Asheville, NC 28804 Toll Free: 800-421-2853 Phone: 828-658-3131
More informationRiver City Cuckoo Clocks, L.L.C.
River City Cuckoo Clocks, L.L.C. Clock Care and Setup Instructions Congratulations on purchasing a River City Cuckoo Clock! We are confident that this original Black Forest Cuckoo Clock will add character
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationSet up and Operation Manual
Set up and Operation Manual Your Machine Serial Number: 1005 17 th Street Columbus, NE 68601 Service Dept. 1-800-795-8251 serv@technikmfg.com THE CARDMASTER SET UP AND OPERATION MANUAL TABLE OF CONTENTS
More informationsymphony Reference Electrodes
DOC022.53.80322 symphony Reference Electrodes 07/2012, Edition 1 User Manual Table of contents Safety information on page 3 Preparation for use on page 4 Specifications on page 3 Measurement on page 5
More informationM2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½
M2 SERIES THERMOSTATS 0 F to 240 F, Narrow Differential, Hermetically Sealed ½ Introduction The Klixon M2 thermostat is constructed with a snap acting bimetal disc that serves as the actuating element.
More informationINSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES
INSTALLING TRAK SPORT TIRE CHAINS ON 20 MODEL 3 TIRES 2018 TESLA, INC. All rights reserved. All information in this document and all MODEL 3 software is subject to copyright and other intellectual property
More informationCASSINI CQR-800 OPERATING INSTRUCTIONS INTRODUCTION
HQR-800 CASSINI CQR-800 OPERATING INSTRUCTIONS INTRODUCTION CONGRATULATIONS ON YOUR PURCHASE OF THE CASSINI CQR-800 TELESCOPE. THIS TELESCOPE HAS BEEN PRODUCED TO PRECISE SPECIFICATIONS. PRIOR TO USING
More informationTest Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.com INSTRUCTION MANUAL. Milwaukee Refractometer
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com INSTRUCTION MANUAL Milwaukee Refractometer MA871 Refractometer for Sucrose Measurements 1 Instruction Manual
More information5. DRIVE 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT DRIVE Standard Turbofan 540, 450 & 1000 RPM with PTO Drive Your Monosem planter will be equipped
More informationWS-7038U Wireless 433 MHz Miniature Rain Monitor. Instruction Manual
WS-7038U Wireless 433 MHz Miniature Rain Monitor Instruction Manual TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 Quick Set-Up Guide 3 Detailed Set-Up Guide Battery Installation
More informationtechnical bulletin Installation Instructions: Wall-Mount Dewpoint Probe ( )
Installation Instructions: Wall-Mount Dewpoint Probe (809-2011) The HMW90 Wall-Mount Dewpoint Probe (P/N 809-2011) HMW90 measures dewpoint for indoor applications such as anti-sweat heater control and
More informationISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER
ISOCON-6 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting
More informationCONTENTS. Batteries. La Crosse Technology, Ltd Page 1
515-1316 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS
More informationFOREMAN ASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationWS-7047TWC Wireless 433 MHz Weather Station With Rainfall and Temperature. Instruction Manual
WS-7047TWC Wireless 433 MHz Weather Station With Rainfall and Temperature Instruction Manual TABLE OF CONTENTS Topic Page Inventory of Contents 2 Additional Equipment 2 Quick Setup 3 Detailed Setup Guide
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationC A S S I N I TRACKER
C A S S I N I TRACKER ASTRONOMICAL REFLECTOR T ELESCOPE SERIES #C-80080TR #C-1100102TR #C-1000120TR #C-1000120TREF #C-900135TR COSMO BRANDS INC. WWW.COSMOSOPTICS.COM 2 CASSINI REFLECTING TELESCOPE OPERATING
More informationDigital Controller Operation
A Family Company Manufacturing In The USA Since 1969 Full Gauge Digital Controller Operation This manual is specific to the operation and diagnostic guides of the Full Gauge digital controller used in
More information3B SCIENTIFIC PHYSICS
3B SCIENTIFIC PHYSICS 30 V, 50/60 Hz: 1018884 / U07001-30 115 V, 50/60 Hz: 101888 / U07001-115 Millikan s Apparatus Instruction sheet 07/16 UD/ALF Safety instructions Millikan s apparatus conforms to the
More informationHMS-5000 Manual. Product Name: HMS-5000 Hall Effect Measurement System with variable temperature from 80K to 350K. - Manual version: ver 5.
HMS-5000 Manual Product Name: HMS-5000 Hall Effect Measurement System with variable temperature from 80K to 350K - Manual version: ver 5.01- www.ecopia21.co.kr - Table of contents - 1. Hardware Installation
More informationOperating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2
Operating Instructions Validation Tool Kit, KT2 For use with USP Apparatus #1 & #2 P/N VALTOL-KT2 Revision 2.0 October 7, 2014 Prepared by: Quality Lab Accessories, LLC 100 Emlen Way, Suite 108 Telford,
More informationFOCUS 30/FOCUS 35 Field Calibration with Survey Pro Field Software
GeoInstruments Application Note June 25th, 2015 FOCUS 30/FOCUS 35 Field Calibration with Survey Pro Field Software Summary: This support note outlines the procedure which should be followed to calibrate
More informationCASSINI CQR-120 OPERATING INSTRUCTIONS
CASSINI CQR-120 OPERATING INSTRUCTIONS INTRODUCTION CONGRATULATIONS ON YOUR PURCHASE OF THE CASSINI CQR-120 TELESCOPE. THIS TELESCOPE HAS BEEN PRODUCED TO PRECISE SPECIFICATIONS. PRIOR TO USING YOUR NEW
More informationDRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationWeatherHub2 Quick Start Guide
WeatherHub2 Quick Start Guide Table of Contents 1 Introduction... 1 2 Packing List... 1 3 Connections... 1 4 IP Addressing... 2 5 Browser Access... 3 6 System Info... 3 7 Weather Station Settings... 4
More informationPOWER PUSHER Snowplow
May 15, 2013 Lit. No. 43682, Rev. 00 POWER PUSHER Snowplow 8' 72040; 10' 72045; Box Plow for Skid-Steer Loaders Owner's Manual and Installation Instructions Original Instructions CAUTION Read this manual
More informationOwner's Manual NSL100B BUILDERS LEVEL NSL500B TRANSIT LEVEL
Owner's Manual NSL100B BUILDERS LEVEL NSL500B TRANSIT LEVEL 1 1. CONTENTS 2. Nomenclature page 3 3. Care and Maintenance page 4 4. Using your Instrument 4.1 Setting up your Instrument page 5 4.2 Stadia
More informationXR Analog Clock - Manual Setting Model Troubleshooting Guide
Primex XR 72MHz Synchronized Time Solution XR Analog Clock - Manual Setting Model Troubleshooting Guide 2018 Primex. All Rights Reserved. The Primex logo is a registered trademark of Primex. All other
More informationLEAPERS, INC. RED/GREEN DOTS
LEAPERS, INC. 1 RED/GREEN DOTS range estimating scopes UTG reticle intensified scopes TOTAL SOLUTION TO YOUR NEEDS -COMMITMENT TO BEST QUALITY, BEST VALUE AND BEST SERVICEwww.LEAPERS.com 32700 Capitol
More information50 Gordon Drive, Rockland, Maine sherplows.com. STORM BOXX Snowplow. 10' and 12' Box Plow for Backhoe Loaders
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 83180, 83185 May 15, 2013 Lit. No. 43687, Rev. 00 STORM BOXX Snowplow 10' and 12' Box Plow for Backhoe Loaders Owner's
More informationInstruction Manual MODELS # 71237, 71238
Conforms to and meets the Transmission Requirements of ISO 12312-2, Filters for Direct Observation of the Sun Instruction Manual MODELS # 71237, 71238 CELESTRON ECLIPSMART BINOCULARS Solar Binoculars Thank
More informationBasic Operation Adjust the eyecup
Objective Lens Image Focus Wheel Reticle Focus Wheel Ocular Lens The Recon R/T Built to handle the roughest conditions, this compact tactical optic is designed to provide field surveillance and range estimation
More informationChemistry MultiMeasure Sensor PS-2170
ä 5 Instruction Manual 012-09523A Chemistry MultiMeasure Sensor PS-2170 ph/ise/orp PRESSURE CHEMISTRY TEMPERATURE SENSOR VOLTAGE 1 2 3 4 PS-2170 5 6 7 cc 8 10 15 20 25 30 35 40 45 50 55 60 Included Equipment
More informationIR F ( C) ENGLISH INSTRUCTION MANUAL. Thermometer
INSTRUCTION MANUAL Thermometer DUAL-LASER TARGETING 12:1 DISTANCE- TO-SPOT RATIO AUTO-SCAN MAX/MIN/AVG/DIFF HIGH/LOW ALARM BACKLIT DISPLAY AUTO POWER-OFF ADJUSTABLE EMISSIVITY IR5 2m -22 752 F (-30 400
More informationFOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationPRETREATMENT TECHNICAL DATA SHEET IRON PHOSPHATE CLEANER COATER / CONVERSION COATING PRODUCT DESCRIPTION
INDUSTRIAL COATINGS CF51HD CHEMFOS 51HD IRON PHOSPHATE CLEANER COATER / CONVERSION COATING PRODUCT DESCRIPTION CHEMFOS 51HD is a heavy duty dual action chemical cleaner-coater designed to remove soils
More informationPATENT PENDING. Easy Gripper product range. #94060 Easy Gripper #94095 Easy Gripper Compact Accessories. Improve SAFETY and efficiency
PATENT PENDING By Easy Gripper product range #94060 Easy Gripper #94095 Easy Gripper Compact Accessories Improve SAFETY and efficiency STANDARD OPTIONAL Your Easy Gripper Contact us to find out which Easy
More informationMAGMA NOTE! 21+ USER MANUAL
21+ MAGMA USER MANUAL NOTE! Please do not put this product away or leave it for extended periods of time with low charge because if the battery falls below 2% then it will no longer accept a charge. Thank
More informationTranspiration. Evaluation copy
Transpiration Computer 9 Water is transported in plants, from the roots to the leaves, following a decreasing water potential gradient. Transpiration, or loss of water from the leaves, helps to create
More informationSpectrometer User s Guide
Spectrometer User s Guide (Order Codes: V-SPEC, SPRT-VIS, SP-VIS, SP-UV-VIS, ESRT-VIS) The spectrometer is a portable light spectrophotometer, combining a spectrometer and a light source/cuvette holder.
More informationInfraRed Thermometer with Laser Pointer
User Manual 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com InfraRed Thermometer with Laser Pointer MODEL IR400 Introduction Congratulations
More informationSC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
More informationFischer Banjo Weather Station with Thermometer, Hygrometer, Barometer User Manual
Fischer 4673-22 Banjo Weather Station with Thermometer, Hygrometer, Barometer User Manual Table of Contents 1. Introduction... 2 2. Care and Cleaning... 2 3. Barometer Operation... 2 3.1 How the aneroid
More informationiweathar EDGE V Installation Guide Copyright 2012 iweathar. All rights reserved.
iweathar EDGE V Installation Guide Copyright 2012 iweathar. All rights reserved. Table of contents: 1 Introduction...3 2 Station Components...4 3 STATION INSTALLATION PROCEDURE...5 4 Specifications...11
More informationuser manual blotting Hoefer PR648 Slot blot manifold um PR648-IM/Rev.F0/08-12
user manual blotting Hoefer PR648 Slot blot manifold um PR648-IM/Rev.F0/08-12 Page finder Introduction...1 Specifications...2 Procedure for standard use of the Hoefer PR648...3 Setting up the Hoefer PR648...3
More informationNational Optical & Scientific Instrument Inc Tri-County Parkway Schertz, Texas Phone (210) Fax (210)
National Optical & Scientific Instrument Inc. 6508 Tri-County Parkway Schertz, Texas 78154 Phone (210) 590-9010 Fax (210) 590-1104 INSTRUCTIONS FOR SHOP MICROSCOPES MODEL NUMBERS 186 187 188 189 National
More informationSnow Blade Operator s/assembly Instructions
Snow Blade Operator s/assembly Instructions TABLE OF CONTENTS Safety Messages...3 Introduction...4 Preparing for Snow Removal...4 Operating Procedure...5 Operating Controls...5 Tire Chains and Wheel Weights...5
More informationFLT5A FLT5A. abc. abc. Thermometer User Guide. Thermometer User Guide. Internet:
abc instruments international FLT5A Thermometer Land Instruments International Dronfield, S18 1DJ England Telephone: (1246) 417691 Facsimile: (1246) 41585 Email: infrared.sales@landinst.com Internet: www.landinst.com
More informationPARTS CATALOGUE / TECHNICAL GUIDE Cal. 4F32A, 8F32A Cal. 8F33A, 8F35A
PARTS CATALOGUE / TECHNICAL GUIDE Cal. 4F32A, 8F32A Cal. 8F33A, 8F35A PARTS CA TALOGUE / TECHNICAL GUIDE (p. 1 22) CATÁLOGO DE PARTES / GUÍA TÉCNICA (p. 23 44) [SPECIFICATIONS] (Revised: 2008 Apr.) Item
More informationHey, that wasn t so hard. INSTRUCTION MANUAL AND WARRANTY
Hey, that wasn t so hard. INSTRUCTION MANUAL AND WARRANTY THANK YOU FOR CHOOSING AN INVICTA TIMEPIECE Long ago, we set out to continue Invicta s original 1837 mission to offer magnificent Swiss timepieces
More informationHS515G-M. PARALOW Circle Dot Sight. User's Manual. Holosun Technologies Inc. Phone: (909) Fax: (909)
HS515G-M PARALOW Circle Dot Sight User's Manual Multi Reticle Holosun Technologies Inc. Phone: (909) 594-2888 Fax: (909) 598-4888 E-mail: info@holosun.com COLOR www.holosun.com PARALOW HS515G-M PARALOW
More informationAmbient Weather WS-152B 6" Contemporary Barometer User Manual
Ambient Weather WS-152B 6" Contemporary Barometer User Manual Table of Contents 2. Introduction... 2 3. Preparation... 2 4. Care and Cleaning... 2 5. Barometer Operation... 2 4.1 How the aneroid barometer
More informationBGA REBALLING INSTRUCTIONS WINSLOW AUTOMATION, INC.
BGA REBALLING INSTRUCTIONS WINSLOW AUTOMATION, INC. Acknowledgments S o l d e r Q u i k i s a t r a d e m a r k o f W i n s l o w A u t o m a t i o n, I n c. R a y c h e m C o r p o r a t i o n p a t e
More informationTactical Binocular USER GUIDE
Tactical Binocular USER GUIDE Thank you for choosing a Leupold Tactical binocular. We trust that all the work we put into it will reward you with years of enjoyment and trouble-free use. Using Your Leupold
More informationWEATHER STATION FIELD GUIDE
WEATHER STATION FIELD GUIDE 2013 Copyright Brüel & Kjær. All rights reserved OVERVIEW This guide illustrates the setup of Weather Station Kits MM-0316-A and MM-0256-A and general accessories for adding
More informationTotal Carboxylic Acid Group Content Applicable Products: Carbopol * Polymers and Pemulen * Polymeric Emulsifiers
LUBRIZOL TEST PROCEDURE TP-1318-A Edition: August, 2010 Total Carboxylic Acid Group Content Applicable Products: Carbopol * Polymers and Pemulen * Polymeric Emulsifiers Scope: This procedure is used for
More informationPre-owned - 8 colour press FA-Line: FA-4* NEXT CLEANINKING #F4733 MODULAR 16" MULTI-SUBSTRATE FLEXO PRESS
Pre-owned - colour press FA-Line: FA-4* NEXT CLEANINKING #F4733 MODULAR 6" MULTI-SUBSTRATE FLEXO PRESS Press Specification Number: Date: Our ref.: 60270 9.06.20 JAL/kis U N W I N D M O D U L E Motorized
More informationZOOM STEREO MICROSCOPE
MANUAL 3078-HD ZOOM STEREO MICROSCOPE MANUAL 73 Mall Drive, Commack, NY 11725 631-864-1000 (P) 631-543-8900 (F) www.accu-scope.com info@accu-scope.com CONTENTS SAFETY NOTES... 3 CARE AND MAINTENANCE...
More informations s t L e 46 APACHE TRACK SYSTEM ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS OVERSIZE 25.4 CM CORNER WHEELS
APACHE TRACK SYSTEM S ALUMINUM FRAME LINK LARGER FOOTPRINT 14.4 CM INTERMEDIATE WHEELS EASY-STEER NEW PATENT PENDING POINT OF ROTATION COMPRESSION MOLDED PLASTIC DRIVE SPROCKET OVERSIZE 25.4 CM CORNER
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationTo explore solubilities and reactivities of different metal ions. To identify ions present in unknown solutions using separation methods.
Qualitative Analysis PURPOSE To develop a separation scheme and confirmatory tests for Fe 3+, Ba 2+, and Ag + cations, and to use it to identify the ions in a sample of unknown composition. GOALS To explore
More informationINFRARED THERMOMETER TM0819
INFRARED THERMOMETER Instruction Manual HORMES LIMITED cs@perfectprime.com G/F UNIT 3, 61 GLENTHORNE ROAD, LONDON W6 0LJ UNITED KINGDOM +44 203 7695377 Retailer Email Address Telephone P.1 CONTENTS 1.
More informationWS-7213U Wireless 433 MHz Weather Station Instruction Manual TABLE OF CONTENTS. Figure 2. Figure 1
WS-7213U Wireless 433 MHz Weather Station Instruction Manual TABLE OF CONTENTS Topic Page Inventory of Contents 3 Additional Equipment 4 Quick Setup 5-8 Detailed Setup Guide Battery Installation 9-11 Setting
More informationA clock designed in close consultation with people living with Dementia.
1. Product Name Day Clock 2. Product Code 55787 3. Colour As shown 4. Brief Description A clock designed in close consultation with people living with Dementia. 5. Contents 1 x Day Clock 6. Snoezelen Stimulations
More informationP4Xi TACTICAL Riflescope TECHNICAL MANUAL
P4Xi TACTICAL Riflescope TECHNICAL MANUAL TABLE OF CONTENTS Page Mounting The Scope 2 Eyepiece Focusing 2 Windage / Elevation Adjustment 3 Setting The Zero Stop 4 Turret Cap Replacement 4 Parallax Focus
More informationAmbient Weather DHR70B-BRASS Handheld Fishing Barometer User Manual
Ambient Weather DHR70B-BRASS Handheld Fishing Barometer User Manual Table of Contents 1. Introduction... 2 2. Preparation... 2 3. Care and Cleaning... 2 4. Aneroid Barometer... 2 4.1 How the aneroid barometer
More informationMODE button MAX/MIN button CHANNEL button / C/ F / RCC button SNOOZE / LIGHT button Battery compartment A/C in-jack 3. 4.
KL4912 Desktop weather station Instruction Manual Introduction This weather station comes with backlight, indoor and outdoor temperature & humidity display, and alarm clock with calendar. Fig. 1 Front
More informationINSTRUCTION MANUAL Milwaukee Refractometer MA886 Refractometer for Sodium Chloride Measurements
Milwaukee Refractometer MA886 Refractometer for Sodium Chloride Measurements www.milwaukeeinst.com INSTRUCTION MANUAL www.milwaukeeinst.com 1 Instruction Manual MA886 Refractometer for Sodium Chloride
More informationTHE HAVERFORD UNIVERSITY S STRAWBRIDGE OBSERVATORY S OF THE 16 MEADE. A quick guide to using the 16 Meade Schmidt-Cassegrain Telescope
THE S OF THE 16 MEADE HAVERFORD UNIVERSITY S STRAWBRIDGE OBSERVATORY A quick guide to using the 16 Meade Schmidt-Cassegrain Telescope First draft: Scott Engle, Fall 2010; Update: Steve Boughn, Fall 2012
More informationInstruction Manual HI Refractometer for Sodium Chloride Measurements
Instruction Manual HI 96821 Refractometer for Sodium Chloride Measurements www.hannainst.com 1 Dear Customer, Thank you for choosing a Hanna Instruments product. Please read this instruction manual carefully
More informationFlexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB March 2008
Flexitest Switch Assemblies Type FT-19R and FT-19RX Supersedes DB41-078 March 2008 FT-19R and FT-19RX FT-19R 3RU with Individual Clear Covers APPLICATION FEATURES The type FT-19R (standard length) and
More informationHigh Resolution High Sensitivity SDR Super Wide Dynamic Camera
High Resolution High Sensitivity SDR Super Wide Dynamic Camera INSTRUCTION MANUAL 15-CA45R 15-CA45RC CONTENTS PRECAUTION.2 FEATURES..3 DIMENSION...3 INSTALLATION...4 SPECIFICATIONS..5 BASIC TECHNICAL DATA
More informationASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationRed and Green Dot Sight FF26002 USER MANUAL
Red and Green Dot Sight FF26002 USER MANUAL The Firefield brand has recently launched with products designed to maximize every intense moment. Originally designed for consumers who need products to hold
More informationCongratulations on purchasing this WS1516IT Professional Weather Station.
FAQ WS1516IT Congratulations on purchasing this WS1516IT Professional Weather Station. For your Weather Station to work properly, it must be started correctly, using good quality alkaline batteries, and
More informationHT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More information