Operation mode: W.R. 2,025 m Completed by: 3/11/2010 Checked by: Main Components :
|
|
|
- Janis James
- 5 years ago
- Views:
Transcription
1 Rig Manufacturer : CASAGRANDE Rig Type : Operation mode: Completed by: 3/11/2010 Checked by: Main Components : ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNT. Item Mass (kg) Moment arm Moment Mast assembly+cat head+winch+clamps Mast assembly in travel (20 tilted backward and upperstructure +0 mm) cages (20 backward and +0mm) undercarriage upperstructure (forward +300mm) upperstructure (forward +0mm) tools (augers,rods...) (zero if extracting) tools (augers, rods etc..) 20 back,+0mm input to use properly the spreadsheet 1 ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNTERWEIGHT Note: The disclaimer on the first worksheet applies to all tables in this workbook counterweight None 0 TOTAL Track bearing length Distance between centrelines of tracks 0.98 Maximum Extraction Force (kn) Maximum Penetration Force (kn) Maximum Auxillary Force (kn) Note: The disclaimer on the first worksheet applies to all tables in this workbook Main Components Totals Tracks Front s 16 Actual Shape 2 square 1.32 Rear s 16 Actual Shape square Forces Auxillary Force Moment Arm 2.03 Notes No limits on working practice INPUT PAGE FOR STANDING-HANDLING- PENETRATING
2 Other Rope / Kelly / Chain Suspended Machine Weight (kg) Force (kn) Max. (kn) Auxiliary Line (kgf) Net Extraction Force (kgf) Net Penetration Force (kgf) Front s Loading (kgf) Front s Equivalent Length and Bearing Pressure (kn/m^2) Rear s Loading (kgf) Rear s Equivalent Length and Bearing Pressure (kn/m^2) Others Track Bearing Length Maximum Equivalent Design Values Track Total Loading (kgf) Track Width Centres FOOT PAD PRESSURE EXCEEDS MAXIMUM TRACK PRESSURE Penetration Force OK Front Force OK Stabilizers in intermediate position (45 ) Rear Force OK shape 170x170 Standing Lower Works pressure at pressure at pressure at pressure at Counterweight and Tracks track track R.H. track track Len. L Q (KPa) Upper Works BRE LOAD CASE ( 1 or 2 ) 1
3 Other Rope / Kelly / Chain Suspended Machine Weight (kg) Force (kn) Max. (kn) Auxiliary Line (kgf) Net Extraction Force (kgf) Net Penetration Force (kgf) Front s Loading (kgf) Front s Equivalent Length and Bearing Pressure (kn/m^2) Rear s Loading (kgf) Rear s Equivalent Length and Bearing Pressure (kn/m^2) Others Track Bearing Length Maximum Equivalent Design Values Track Total Loading (kgf) Track Width Centres Penetration Force OK Stabilizers in intermediate position (45 ) Front Force OK shape 170x170 Rear Force OK Handling Lower Works pressure at pressure at pressure at pressure at Counterweight and Tracks track track R.H. track track Len. L Q (KPa) Upper Works BRE LOAD CASE ( 1 or 2 ) 1
4 Other Rope / Kelly / Chain Suspended Machine Weight (kg) Force (kn) Max. (kn) Auxiliary Line (kgf) Net Extraction Force (kgf) Net Penetration Force (kgf) Front s Loading (kgf) Front s Equivalent Length and Bearing Pressure (kn/m^2) Rear s Loading (kgf) Rear s Equivalent Length and Bearing Pressure (kn/m^2) Others Track Bearing Length Maximum Equivalent Design Values Track Total Loading (kgf) Track Width Centres Penetrating Lower Works pressure at pressure at pressure at pressure at Counterweight and Tracks track track R.H. track track Len. L Q (KPa) Upper Works BRE LOAD CASE ( 1 or 2 ) 2 Penetration Force OK Front Force OK Rear Force OK Stabilizers shape 170x170
5 Rig Manufacturer : CASAGRANDE Rig Type : Operation mode: Completed by: 3/11/2010 Checked by: Main Components : ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNT. Item Mass (kg) Moment arm Moment Mast assembly+cat head+winch+clamps Mast assembly in travel (20 tilted backward and upperstructure +0 mm) cages (20 backward and +0mm) undercarriage upperstructure (forward +300mm) upperstructure (forward +0mm) tools (augers,rods...) (zero if extracting) tools (augers, rods etc..) 20 back,+0mm input to use properly the spreadsheet 1 ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNTERWEIGHT Note: The disclaimer on the first worksheet applies to all tables in this workbook counterweight None 0 TOTAL Track bearing length Distance between centrelines of tracks 0.98 Maximum Extraction Force (kn) Maximum Penetration Force (kn) Maximum Auxillary Force (kn) Note: The disclaimer on the first worksheet applies to all tables in this workbook Main Components Totals Tracks Front s 16 Actual Shape 2 square 1.32 Rear s 16 Actual Shape square Forces Auxillary Force Moment Arm 2.03 Notes No limits on working practice INPUT PAGE FOR STANDING-HANDLING- PENETRATING
6 Other Rope / Kelly / Chain Suspended Machine Weight (kg) Force (kn) Max. (kn) Auxiliary Line (kgf) Net Extraction Force (kgf) Net Penetration Force (kgf) Front s Loading (kgf) Front s Equivalent Length and Bearing Pressure (kn/m^2) Rear s Loading (kgf) Rear s Equivalent Length and Bearing Pressure (kn/m^2) Others Track Bearing Length Maximum Equivalent Design Values Track Total Loading (kgf) Track Width Centres Penetration Force OK Front Force OK Rear Force OK Extracting Lower Works pressure at pressure at pressure at pressure at Counterweight and Tracks track track R.H. track track Len. L Q (KPa) Upper Works BRE LOAD CASE ( 1 or 2 ) 2
7 Rig Manufacturer : CASAGRANDE Rig Type : Operation mode: Completed by: 3/11/2010 Checked by: Main Components : ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNT. Item Mass (kg) Moment arm Moment Mast assembly+cat head+winch+clamps Mast assembly in travel (20 tilted backward and upperstructure +0 mm) cages (20 backward and +0mm) undercarriage upperstructure (forward +300mm) upperstructure (forward +0mm) tools (augers,rods...) (zero if extracting) tools (augers, rods etc..) 20 back,+0mm input to use properly the spreadsheet 1 ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNTERWEIGHT Note: The disclaimer on the first worksheet applies to all tables in this workbook counterweight None 0 TOTAL Track bearing length Distance between centrelines of tracks 0.98 Maximum Extraction Force (kn) Maximum Penetration Force (kn) Maximum Auxillary Force (kn) Note: The disclaimer on the first worksheet applies to all tables in this workbook Main Components Totals Tracks Front s 16 Actual Shape 2 square 1.32 Rear s 16 Actual Shape square Forces Auxillary Force Moment Arm 2.03 Notes No limits on working practice INPUT PAGE FOR STANDING-HANDLING- PENETRATING
8 Other Rope / Kelly / Chain Suspended Machine Weight (kg) Force (kn) Max. (kn) Auxiliary Line (kgf) Net Extraction Force (kgf) Net Penetration Force (kgf) Front s Loading (kgf) Front s Equivalent Length and Bearing Pressure (kn/m^2) Rear s Loading (kgf) Rear s Equivalent Length and Bearing Pressure (kn/m^2) Others Track Bearing Length Maximum Equivalent Design Values Track Total Loading (kgf) Track Width Centres Penetration Force OK Front Force OK Rear Force OK Travelling Lower Works pressure at pressure at pressure at pressure at Counterweight and Tracks track track R.H. track track Len. L Q (KPa) Upper Works BRE LOAD CASE ( 1 or 2 ) 1
Operation mode: Auger Drilling Completed by: R. Savi 22/08/2015 Checked by: Main Components :
Rig Manufacturer : E.G.T. Rig Type : Operation mode: Auger Drilling Completed by: R. Savi 22/08/2015 Checked by: Main Components : UPPER WORKS LOWER WORKS ROPE / KELLY / CHAIN SUSPENDED EQUIPMENT COUNT.
Dynamics of Rotation
Dynamics of Rotation 1 Dynamic of Rotation Angular velocity and acceleration are denoted ω and α respectively and have units of rad/s and rad/s. Relationship between Linear and Angular Motions We can show
AQA Maths M2. Topic Questions from Papers. Moments and Equilibrium
Q Maths M2 Topic Questions from Papers Moments and Equilibrium PhysicsndMathsTutor.com PhysicsndMathsTutor.com 11 uniform beam,, has mass 20 kg and length 7 metres. rope is attached to the beam at. second
Announcements. Equilibrium of a Rigid Body
Announcements Equilibrium of a Rigid Body Today s Objectives Identify support reactions Draw a free body diagram Class Activities Applications Support reactions Free body diagrams Examples Engr221 Chapter
4.0 m s 2. 2 A submarine descends vertically at constant velocity. The three forces acting on the submarine are viscous drag, upthrust and weight.
1 1 wooden block of mass 0.60 kg is on a rough horizontal surface. force of 12 N is applied to the block and it accelerates at 4.0 m s 2. wooden block 4.0 m s 2 12 N hat is the magnitude of the frictional
product manual H-3220A Benkelman Beam
05.12 product manual H-3220A Benkelman Beam General The H-3220A Benkelman Beam Apparatus is a convenient and accurate device used for measuring the deflection of flexible pavements under moving wheel
M201 assessment Moments
Do the questions as a test circle questions you cannot answer Red 1) A light see-saw is 10 m long with the pivot 3 m from the left. a) A 4 kg weight is placed on the left-hand end of the see-saw. Write
Unit 4 Statics. Static Equilibrium Translational Forces Torque
Unit 4 Statics Static Equilibrium Translational Forces Torque 1 Dynamics vs Statics Dynamics: is the study of forces and motion. We study why objects move. Statics: is the study of forces and NO motion.
1. If it is known that the center pin A supports one-half of the vertical loading shown, determine the force in member BF.
1. If it is known that the center pin A supports one-half of the vertical loading shown, determine the force in member B. Joint A AB A I. Cut D D B A 26 kn A I. Cut H 13 kn D B D A H 13 kn 2. Determine
AP Physics: Newton's Laws 2
Assignment Due Date: December 12, 2011 AP Physics: Newton's Laws 2 Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A lamp with a mass m = 42.6 kg is hanging
Turning Forces and Levers. Junior Science
Turning Forces and Levers Junior Science Lesson Objectives Understand the terms - Lever, Fulcrum, Turning effect, Moment Recall the formula M= Fd and be able to calculate the moment of a force Be able
Tower Cranes & Foundations The Interface & CIRIA C654 Stuart Marchand C.Eng. FICE FIStructE Director Wentworth House Partnership
Tower Cranes & Foundations The Interface & CIRIA C654 Stuart Marchand C.Eng. FICE FIStructE Director Wentworth House Partnership EXAMPLES OF TOWER CRANE FOUNDATION TYPES Rail mounted Pad Base Piled Base
my!wind Ltd 5 kw wind turbine Static Stability Specification
my!wind Ltd 5 kw wind turbine Static Stability Specification 1 P a g e 0 3 / 0 4 / 2 0 1 4 Contents Contents... 2 List of Changes... 2 Appendixes... 2 General remarks... 3 1. Introduction... 4 2. Geometry...
Exercise Torque Magnitude Ranking Task. Part A
Exercise 10.2 Calculate the net torque about point O for the two forces applied as in the figure. The rod and both forces are in the plane of the page. Take positive torques to be counterclockwise. τ 28.0
ATF 90G-4. Operating, Service and Maintenance Manual. Vehicle identification no: WFN4 RUL R
Operating, Service and Maintenance Manual ATF 90G-4 Vehicle identification no: WFN4 RUL R5 72045 Manufacturer FAUN GmbH Postfach 10 01 08 D - 91205 Lauf a. d. Pegnitz Tel: (09123) 185-0 Fax: (09123) 7
Moment of Inertia Race
Review Two points, A and B, are on a disk that rotates with a uniform speed about an axis. Point A is closer to the axis than point B. Which of the following is NOT true? 1. Point B has the greater tangential
Jurong Junior College 2014 J1 H1 Physics (8866) Tutorial 3: Forces
Jurong Junior College 2014 J1 H1 Physics (8866) Tutorial 3: Forces Take g = 9.81 m s -2, P atm = 1.0 x 10 5 Pa unless otherwise stated 1. Draw the free body diagram / force diagram for the following :
Jurong Junior College 2014 J1 H1 Physics (8866) Tutorial 3: Forces (Solutions)
Jurong Junior College 2014 J1 H1 Physics (8866) Tutorial 3: Forces (Solutions) Take g = 9.81 m s -2, P atm = 1.0 x 10 5 Pa unless otherwise stated Learning Outcomes (a) Sub-Topic recall and apply Hooke
Worksheet for Exploration 10.1: Constant Angular Velocity Equation
Worksheet for Exploration 10.1: Constant Angular Velocity Equation By now you have seen the equation: θ = θ 0 + ω 0 *t. Perhaps you have even derived it for yourself. But what does it really mean for the
Determine the resultant internal loadings acting on the cross section at C of the beam shown in Fig. 1 4a.
E X M P L E 1.1 Determine the resultant internal loadings acting on the cross section at of the beam shown in Fig. 1 a. 70 N/m m 6 m Fig. 1 Support Reactions. This problem can be solved in the most direct
Springs Old Exam Questions
Springs Old Exam Questions Q1. A spring has a stiffness of 15 Nm 1. Calculate the extension of the spring when a weight of 8.0 N is suspended on it. Give your answer in metres. extension of spring... m
Structural, Snow & Wind Loading Appraisal Report
Company Name Or Logo Here Structural, Snow & Wind Loading Appraisal Report In accordance with Guide to the Installation of Photovoltaic Systems 2012 2 nd Edition Reference number 001 Company Name Solar
SOLUTION 8 1. a+ M B = 0; N A = 0. N A = kn = 16.5 kn. Ans. + c F y = 0; N B = 0
8 1. The mine car and its contents have a total mass of 6 Mg and a center of gravity at G. If the coefficient of static friction between the wheels and the tracks is m s = 0.4 when the wheels are locked,
Figure 5.1a, b IDENTIFY: Apply to the car. EXECUTE: gives.. EVALUATE: The force required is less than the weight of the car by the factor.
51 IDENTIFY: for each object Apply to each weight and to the pulley SET UP: Take upward The pulley has negligible mass Let be the tension in the rope and let be the tension in the chain EXECUTE: (a) The
SOLUTION 4 1. If A, B, and D are given vectors, prove the distributive law for the vector cross product, i.e., A : (B + D) = (A : B) + (A : D).
4 1. If A, B, and D are given vectors, prove the distributive law for the vector cross product, i.e., A : (B + D) = (A : B) + (A : D). Consider the three vectors; with A vertical. Note obd is perpendicular
The NRC Lift/Transport system
The NRC Lift/Transport system Manufactured by: Dynamic Design Pharma Laguna Niguel, California www.dynamicdesignpharma.com System Description The NRC Lift/Transport System is a transport and lifting device
my!wind Ltd 5 kw wind turbine Static Stability Specification
my!wind Ltd 5 kw wind turbine Static Stability Specification 1 P a g e 0 3 / 0 4 / 2 0 1 4 Contents Contents... 2 List of Changes... 2 Appendixes... 2 General remarks... 3 1. Introduction... 4 2. Geometry...
TUTORIAL SHEET 1. magnitude of P and the values of ø and θ. Ans: ø =74 0 and θ= 53 0
TUTORIAL SHEET 1 1. The rectangular platform is hinged at A and B and supported by a cable which passes over a frictionless hook at E. Knowing that the tension in the cable is 1349N, determine the moment
UNIT 4 NEWTON S THIRD LAW, FORCE DIAGRAMS AND FORCES. Objectives. To understand and be able to apply Newton s Third Law
UNIT 4 NEWTON S THIRD LAW, FORCE DIAGRAMS AND FORCES Objectives To understand and be able to apply Newton s Third Law To be able to determine the object that is exerting a particular force To understand
Mechanisms Simple Machines. Lever, Wheel and Axle, & Pulley
Mechanisms Simple Machines Lever, Wheel and Axle, & Pulley Simple Machines Mechanisms that manipulate magnitude of force and distance. The Six Simple Machines Lever Wheel and Axle Pulley The Six Simple
API Ballot Summary Sheet 11/10/2009
Ballot: API Ballot Summary Sheet 11/10/2009 4F 3rd Ed - Service Rig Rating Ballot ID: 1845 Start Date: 9/15/09 Closing Date: 10/30/09 sociate: Roland Goodman Coordinator: Roland Goodman Proposal: VotingCategory
Chapter 3 Machines EXERCISE- 3 (A)
EXERCISE- 3 (A) Question 1: What do you understand by a simple machine? Solution 1: A machine is a device by which we can either overcome a large resistive force at some point by applying a small force
[1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light
![[1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light](/thumbs/75/72218892.jpg "[1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light")
1 (a) Define the newton... [1] (b) State why the equation F = ma cannot be applied to particles travelling at speeds very close to the speed of light... [1] (c) Fig. 3.1 shows the horizontal forces acting
Physics 23 Exam 2 March 3, 2009
Use the following to answer question 1: A stationary 4-kg shell explodes into three pieces. Two of the fragments have a mass of 1 kg each and move along the paths shown with a speed of 10 m/s. The third
Q1. The figure below shows an apparatus used to locate the centre of gravity of a non-uniform metal rod.
PhysicsAndMathsTutor.com 1 Q1. The figure below shows an apparatus used to locate the centre of gravity of a non-uniform metal rod. The rod is supported horizontally by two wires, P and Q and is in equilibrium.
Name: M1 - Moments. Date: Time: Total marks available: Total marks achieved:
Name: M1 - Moments Date: Time: Total marks available: Total marks achieved: Questions Q1. Figure 3 A beam AB has weight W newtons and length 4 m. The beam is held in equilibrium in a horizontal position
Similar to trusses, frames are generally fixed, load carrying structures.
Similar to trusses, frames are generally fixed, load carrying structures. The main difference between a frame and a truss is that in a frame at least one member is a multi force member (çoklu kuvvet elemanı).
Mechanics Questions. (Throughout this document take the acceleration under gravity to be g = 9.81ms 2 ).
Mechanics Questions (Throughout this document take the acceleration under gravity to be g = 9.81ms 2 ). 1. A block of mass m = 10kg is resting on a rough plane inclined at θ = 30 to the horizontal. A light,
The acceleration due to gravity g, which varies with latitude and height, will be approximated to 101m1s 2, unless otherwise specified.
The acceleration due to gravity g, which varies with latitude and height, will be approximated to 101m1s 2, unless otherwise specified. F1 (a) The fulcrum in this case is the horizontal axis, perpendicular
STRESS. Bar. ! Stress. ! Average Normal Stress in an Axially Loaded. ! Average Shear Stress. ! Allowable Stress. ! Design of Simple Connections
STRESS! Stress Evisdom! verage Normal Stress in an xially Loaded ar! verage Shear Stress! llowable Stress! Design of Simple onnections 1 Equilibrium of a Deformable ody ody Force w F R x w(s). D s y Support
1. The toggle pliers are used for a variety of clamping purposes. For the handle position given by a=10 o and for a handle grip P=150 N, calculate
1. The toggle pliers are used for a variet of clamping purposes. or the handle position given b a=10 o and for a handle grip P=150 N, calculate the clamping force C produced. Note that pins A and D are
Engineering Mechanics Statics
Mechanical Systems Engineering _ 2016 Engineering Mechanics Statics 7. Equilibrium of a Rigid Body Dr. Rami Zakaria Conditions for Rigid-Body Equilibrium Forces on a particle Forces on a rigid body The
CEE 271: Applied Mechanics II, Dynamics Lecture 25: Ch.17, Sec.4-5
1 / 36 CEE 271: Applied Mechanics II, Dynamics Lecture 25: Ch.17, Sec.4-5 Prof. Albert S. Kim Civil and Environmental Engineering, University of Hawaii at Manoa Date: 2 / 36 EQUATIONS OF MOTION: ROTATION
TOWER CRNE MAST ANCHORAGE TIE DESIGN
TOWER CRNE MST NCHORGE TIE DESIGN Sujit Halder P&M Department ITD Cementation India Limited bstract: One variant is piled base cast in fixing angle type with top slewing tower crane which needs mast anchorage
Lab 10: Ballistic Pendulum
Lab Section (circle): Day: Monday Tuesday Time: 8:00 9:30 1:10 2:40 Lab 10: Ballistic Pendulum Name: Partners: Pre-Lab You are required to finish this section before coming to the lab it will be checked
Check Homework. Reading Quiz Applications Equations of Equilibrium Example Problems Concept Questions Group Problem Solving Attention Quiz
THREE-DIMENSIONAL FORCE SYSTEMS Today s Objectives: Students will be able to solve 3-D particle equilibrium problems by a) Drawing a 3-D free body diagram, and, b) Applying the three scalar equations (based
Kinematics and Dynamics
AP PHYS 1 Test Review Kinematics and Dynamics Name: Other Useful Site: http://www.aplusphysics.com/ap1/ap1- supp.html 2015-16 AP Physics: Kinematics Study Guide The study guide will help you review all
SOLUTION 8 7. To hold lever: a+ M O = 0; F B (0.15) - 5 = 0; F B = N. Require = N N B = N 0.3. Lever,
8 3. If the coefficient of static friction at is m s = 0.4 and the collar at is smooth so it only exerts a horizontal force on the pipe, determine the minimum distance x so that the bracket can support
Twentieth SLAPT Physics Contest Southern Illinois University Edwardsville April 30, Mechanics Test
Twentieth SLAPT Physics Contest Southern Illinois University Edwardsville April 30, 2005 Mechanics Test Please answer the following questions on the supplied answer sheet. You may write on this test booklet,
SN QUESTION YEAR MARK 1. State and prove the relationship between shearing stress and rate of change of bending moment at a section in a loaded beam.
ALPHA COLLEGE OF ENGINEERING AND TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING MECHANICS OF SOLIDS (21000) ASSIGNMENT 1 SIMPLE STRESSES AND STRAINS SN QUESTION YEAR MARK 1 State and prove the relationship
PHY 2048 Final Exam Review DISCLAIMER - I am a student and there could potentially be errors in the solutions.
PHY 2048 Final Exam Review DISCLAIMER - I am a student and there could potentially be errors in the solutions. 1. A large wheel of cheese, initially at rest, accelerates at a rate of 10 rad/s^2. The radius
The basic dynamic load rating C is a statistical number and it is based on 90% of the bearings surviving 50 km of travel carrying the full load.
Technical data Load Rating & Life Under normal conditions, the linear rail system can be damaged by metal fatigue as the result of repeated stress. The repeated stress causes flaking of the raceways and
SPH3U Practice Test. True/False Indicate whether the statement is true or false.
True/False Indicate whether the statement is true or false. 1. The reason your head feels like it jerks backward when pulling away from a stop sign is best explained by Newton's First Law. 2. An airplane
ANALYSIS OF GATE 2018*(Memory Based) Mechanical Engineering
ANALYSIS OF GATE 2018*(Memory Based) Mechanical ME Industrial 4% General Aptitude 15% Mathematics 14% Mechanics 4% Manufacturing 14% Mechanics of Materials 14% Thermodynamics 10% Heat Transfer 2% Fluid
FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]
![FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]](/thumbs/96/126795264.jpg "FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ]")
FOUR-POINT CONTACT SLEWING RINGS - without gear [ O ] Number of the Loading Boundary Dimensions Static Ax.Basic Load Rating Designation Weight Abutment Dimensions Curve d D T C oa G J 1 J 2 N 1 N 2 n 1
Center of Mass & Linear Momentum
PHYS 101 Previous Exam Problems CHAPTER 9 Center of Mass & Linear Momentum Center of mass Momentum of a particle Momentum of a system Impulse Conservation of momentum Elastic collisions Inelastic collisions
Chapter 8, Rotational Equilibrium and Rotational Dynamics. 3. If a net torque is applied to an object, that object will experience:
CHAPTER 8 3. If a net torque is applied to an object, that object will experience: a. a constant angular speed b. an angular acceleration c. a constant moment of inertia d. an increasing moment of inertia
3) When a rigid body rotates about a fixed axis all the points in the body have the same centripetal acceleration. FALSE
PHYSICS 1401 Exam 3 Review Name TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false. 1) When a rigid body rotates about a fixed axis all the points in the body have the same
1. Attempt any ten of the following : 20
*17204* 17204 21314 3 Hours/100 Marks Seat No. Instructions : (1) All questions are compulsory. (2) Answer each next main question on a new page. (3) Illustrate your answers with neat sketches wherever
STATICS. Bodies. Vector Mechanics for Engineers: Statics VECTOR MECHANICS FOR ENGINEERS: Design of a support
4 Equilibrium CHAPTER VECTOR MECHANICS FOR ENGINEERS: STATICS Ferdinand P. Beer E. Russell Johnston, Jr. Lecture Notes: J. Walt Oler Texas Tech University of Rigid Bodies 2010 The McGraw-Hill Companies,
London Examinations IGCSE
Centre No. Candidate No. Surname Signature Initial(s) Paper Reference(s) 4420/2H London Examinations IGCSE Physics Paper 2H Higher Tier Monday 21 May 2007 Afternoon Time: 2 hours Materials required for
AP Homework 4.1. Name: Date: Class Period:
AP Homework 4.1 Name: Date: Class Period: (1) A 75.0-kg wrecking ball hangs from a uniform heavy-duty chain having a mass of 26.0 kg. (a) Find the maximum and minimum tension in the chain. (b) What is
Associate Professor. Tel:
DEPARTMENT OF CIVIL ENGINEERING IIT DELHI Dr. Suresh Bhalla Associate Professor Tel: 2659-1040 Email: Sbhalla@civil.iitd.ac.in FOUNDATIONS Geotechnical Engineer Structural Engineer Location and depth criteria
Design and Analysis of Adjustable Inside Diameter Mandrel for Induction Pipe Bender
International Journal of Engineering Trends and Technology (IJETT) Volume0Number - Apr 0 Design and Analysis of Adjustable Inside Diameter Mandrel for Induction Pipe Bender S.Nantha Gopan, M.Gowtham J.Kirubakaran
Computation and Field Dynamic Stress Simulation of Shovel Crawler Shoes
MOJ Mining and Metallurgy Computation and Field Dynamic Stress Simulation of Shovel Crawler Shoes Abstract Large capacity electric cable shovels are widely used in surface mining of Athabasca oil sands
BTECH MECHANICAL PRINCIPLES AND APPLICATIONS. Level 3 Unit 5
BTECH MECHANICAL PRINCIPLES AND APPLICATIONS Level 3 Unit 5 FORCES AS VECTORS Vectors have a magnitude (amount) and a direction. Forces are vectors FORCES AS VECTORS (2 FORCES) Forces F1 and F2 are in
Physics 211 Week 5. Work and Kinetic Energy: Block on Ramp
Physics 211 Week 5 Work and Kinetic Energy: Block on Ramp A block starts with a speed of 15 m/s at the bottom of a ramp that is inclined at an angle of 30 o with the horizontal. The coefficient of kinetic
INF.7. Economic Commission for Europe Inland Transport Committee. Working Party on the Transport of Dangerous Goods 23 July 2012
Economic Commission for Europe Inland Transport Committee Working Party on the Transport of Dangerous Goods 23 July 2012 Joint Meeting of the RID Committee of Experts and the Working Party on the Transport
Final Examination Study Set 1. (Solutions will be in the Solutions Manual of Textbook)
Final Examination Study Set 1 (Solutions will be in the Solutions Manual of Textbook) Final Examination Study Set 2 (Solutions will be in the Solutions Manual of Textbook) 3/86 The shaft, lever,
LAB 4: FORCE AND MOTION
Lab 4 - Force & Motion 37 Name Date Partners LAB 4: FORCE AND MOTION A vulgar Mechanik can practice what he has been taught or seen done, but if he is in an error he knows not how to find it out and correct
is the study of and. We study objects. is the study of and. We study objects.
Static Equilibrium Translational Forces Torque Unit 4 Statics Dynamics vs Statics is the study of and. We study objects. is the study of and. We study objects. Recall Newton s First Law All objects remain
Moments of forces. Rudolf arnheim
T C Y Moments of forces The photograph shows a mobile tower crane, consisting of the main vertical section housing the engine, winding gear and controls and the boom which supports the load and the counterweight.
EXPERIMENTAL INVESTIGATION OF PRECESSION AND NUTATION OF A GYROSCOPE AND DETERMINATION OF MOMENT OF INERTIA
Mechanics Spinning Motion Precession and Nutation of a Gyroscope EXPERIMENTAL INVESTIGATION OF PRECESSION AND NUTATION OF A GYROSCOPE AND DETERMINATION OF MOMENT OF INERTIA Verify that the frequency of
Mechanics M1 Advanced Subsidiary
Paper Reference(s) 6677 Edexcel GCE Mechanics M1 Advanced Subsidiary Tuesday 6 June 2006 Afternoon Time: 1 hour 30 minutes Materials required for examination Mathematical Formulae (Lilac or Green) Items
Q1. The figure below shows an apparatus used to locate the centre of gravity of a non-uniform metal rod.
PhysicsAndMathsTutor.com 1 Q1. The figure below shows an apparatus used to locate the centre of gravity of a non-uniform metal rod. The rod is supported horizontally by two wires, P and Q and is in equilibrium.
Phys 111 Final Exam December 16, 2015
Phys 111 Final Exam December 16, 2015 61. The density of a solid object is defined as the ratio of the mass of the object to its volume. The dimension of density is A) [M]/[L]. B) [L] 3 /[M]. C) [M] /[L]
AP practice ch 7-8 Multiple Choice
AP practice ch 7-8 Multiple Choice 1. A spool of thread has an average radius of 1.00 cm. If the spool contains 62.8 m of thread, how many turns of thread are on the spool? "Average radius" allows us to
Welcome. I will be using your LBCC to communicate with you about the class.
Welcome David Ruiz I will be using your LBCC email to communicate with you about the class. I will NEVER send scores/grades to your email address unless you ask me to do so. Syllabus Read over carefully
I B.TECH EXAMINATIONS, JUNE ENGINEERING MECHANICS (COMMON TO CE, ME, CHEM, MCT, MMT, AE, AME, MIE, MIM)
Code.No: 09A1BS05 R09 SET-1 I B.TECH EXAMINATIONS, JUNE - 2011 ENGINEERING MECHANICS (COMMON TO CE, ME, CHEM, MCT, MMT, AE, AME, MIE, MIM) Time: 3 hours Max. Marks: 75 Answer any FIVE questions All questions
Hong Kong Institute of Vocational Education (Tsing Yi) Higher Diploma in Civil Engineering Structural Mechanics. Chapter 1 PRINCIPLES OF STATICS
PRINCIPLES OF STTICS Statics is the study of how forces act and react on rigid bodies which are at rest or not in motion. This study is the basis for the engineering principles, which guide the design
Name Period Date A) B) C) D)
Example Problems 9.2 E1. A car rounds a curve of constant radius at a constant speed. Which diagram best represents the directions of both the car s velocity and acceleration? Explain: A) B) C) D) E2.
Chapter 4: Newton s laws of motion
Chapter 4: Newton s laws of motion Objectives: What are forces? How do we identify them? Drawing free-body diagrams. Relating forces and motion. Solving force and motion problems. What is a force? Forces
Chapter 09 Multiple Choice Test
Class: Date: Chapter 09 Multiple Choice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A simple machine can multiply: a. forces only. b. energy only.
SOLUTION T 1 + U 1-2 = T C(31.5)(2.5)A10 6 B(0.2)D = 1 2 (7)(v 2) 2. v 2 = 2121 m>s = 2.12 km>s. Ans. (approx.
4 5. When a 7-kg projectile is fired from a cannon barrel that has a length of 2 m, the explosive force exerted on the projectile, while it is in the barrel, varies in the manner shown. Determine the approximate
MEI Mechanics 1. Applying Newton s second law along a line
MEI Mechanics 1 Applying Newton s second law along a line Chapter assessment 1. (a) The following two questions are about the motion of a car of mass 1500 kg, travelling along a straight, horizontal road.
2008 FXA THREE FORCES IN EQUILIBRIUM 1. Candidates should be able to : TRIANGLE OF FORCES RULE
THREE ORCES IN EQUILIBRIUM 1 Candidates should be able to : TRIANGLE O ORCES RULE Draw and use a triangle of forces to represent the equilibrium of three forces acting at a point in an object. State that
Uncertainty and Risk in Foundation Design
2.1 Classify the uncertainty associated with following items as either aleatory or epistemic and explain your reason for your classification: average wind speed over a 30 day period, location of a certain
DETAIL C SCALE 1 : 1.3 SECTION B-B SCALE 1 : 2
2 2 B 3 4 4 6 3 3 8 2 8 9.2 4 5 9.3 7 0 The Grasshopper Escapement shown here was designed as a stand alone mechanism to prove out the design, and as such have additional parts to support it and to enable
Moments Mixed exercise 4
Moments Mixed exercise 4 1 a The plank is in equilibrium. Let the reaction forces at the supports be R and R D. Considering moments about point D: R (6 1.5 1) = (100+ 145) (3 1.5) 3.5R = 245 1.5 3.5R =
PHYS 101 Previous Exam Problems. Force & Motion I
PHYS 101 Previous Exam Problems CHAPTER 5 Force & Motion I Newton s Laws Vertical motion Horizontal motion Mixed forces Contact forces Inclines General problems 1. A 5.0-kg block is lowered with a downward
General Physics I Spring Applying Newton s Laws
General Physics I Spring 2011 pplying Newton s Laws 1 Friction When you push horizontally on a heavy box at rest on a horizontal floor with a steadily increasing force, the box will remain at rest initially,
Rotational Equilibrium
Rotational Equilibrium In this laboratory, we study the conditions for static equilibrium. Axis Through the Center of Gravity Suspend the meter stick at its center of gravity, with its numbers increasing
Conceptual Questions for Laws of Motion
1 Conceptual Questions for Laws of Motion Applicable for Class 9 Laws of motion Question 1 Which is true from Newton's Third law of motion? a) For every action force there is a 50% reaction force in the
1. Please complete the following short problems.
Name 1. Please complete the following short problems. For parts 1A and 1B, we will consider three M88 recovery vehicles pulling an M1 tank back onto the road as shown below. F2 F1 50 M88 #1 50 M88 #2 y
r1 (D) r 2 = 2 r 1 (E) r 2 = 4r 1 2
April 24, 2013; Page 2 PART A FOR EACH OF THE FOLLOWING QUESTIONS IN PART A, ENTER THE MOST APPROPRIATE RESPONSE ON THE OMR SHEET. A1. A thin rod of mass M and length L is initially able to rotate through
Loadcell Calibration - Evaluation of Uncertainties
Loadcell Calibration - Evaluation of Uncertainties This document is a revision of the evaluation issued in June 2015. Novatech s calibration laboratory is not UKAS accredited due to the high number of
2014 MECHANICS OF MATERIALS
R10 SET - 1 II. Tech I Semester Regular Examinations, March 2014 MEHNIS OF MTERILS (ivil Engineering) Time: 3 hours Max. Marks: 75 nswer any FIVE Questions ll Questions carry Equal Marks ~~~~~~~~~~~~~~~~~~~~~~~~~
Chapter 9 Conceptual Physics Study Guide
Name : Date: Period: Chapter 9 Conceptual Physics Study Guide Multiple Choice Identify the choice that best completes the statement or answers the question. 1. In physics, work is defined as a. force times
PROBLEMS. m s TAC. m = 60 kg/m, determine the tension in the two supporting cables and the reaction at D.
1. he uniform I-beam has a mass of 60 kg per meter of its length. Determine the tension in the two supporting cables and the reaction at D. (3/62) A( 500) m (5 23) m m = 60 kg/m determine the tension in
Main points of today s lecture: Normal force Newton s 3 d Law Frictional forces: kinetic friction: static friction Examples. Physic 231 Lecture 9
Main points of today s lecture: Normal force Newton s 3 d Law Frictional forces: kinetic friction: static friction Examples. Physic 3 Lecture 9 f N k = µ k f N s < µ s Atwood s machine Consider the Atwood