Cool Roofs Standards & the ECRC Product Rating Program

Transcription

1 Cool Roofs Standards & the ECRC Product Rating Program Dr. Afroditi Synnefa ) TC Leader ECRC GRBES- NKUA 20/11/2016 European Cool Roofs Council 1

2 Outline Introduction Cool Roof Standards Towards a European Standard for cool roofs The ECRC roof product rating program Future developments 20/11/2016 European Cool Roofs Council 2

3 Cool Roofs Cool roofs: contribute to mitigating climate change reduce the urban heat island effect increase the sustainability of buildings 3

4 Cool roofs worldwide Cool roofs technology has long been applied and promoted in the U.S. and other countries around the world like Japan, Australia, Brazil, India etc.

5 The European Cool Roofs Council Formulation of cool roof product rating programme in Europe. Inclusion of cool materials in European Standards, Energy Assessment Methods. Promote the benefits of cool materials to engineers, stakeholders, etc. ECRC product rating program launched An Interlaboratory comparison (ILC) conducted Bridging with CEN for measurement standards development Actions of promotion & dissemination

6 Definition Cool roofs high solar reflectance high infrared emittance less solar radiation absorbed faster release of heat (IR radiation) lower surface T less heat penetrates into the building less heat transferred to ambient air 6

7 Cool Roof Standards 20/11/2016 European Cool Roofs Council 7

8 Measurement of SR 1. Spectrophotometer with an integrating sphere Total spectral hemispherical reflectance for a small area ( 0.1 cm2) of a flat and uniform sample (250 to 2500 nm). -ASTM E903 : Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres - EN 410: Glass in building. Determination of luminous and solar characteristics of glazing - ISO 9050: 'Glass in Building: Determination of Light Transmittance, Solar Direct Transmittance, Energy Transmittance and Ultra-violet Transmittance, and Related Glazing Factors' Genève, Switzerland, CIE Practical Methods for the Measurement of Reflectance and Transmittance 8

9 Measurement of SR 2. Portable solar reflectometer Solar Reflectance of a uniform sample of an area a ( 2 cm2) ASTM C1549: Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer CRRC-1 Method #1: Standard Practice for Measuring Solar Reflectance of a Flat, Opaque, and Heterogeneous Surface Using a Portable Solar Reflectometer 9

10 Measurement of SR 3. Pyranometer (in situ measurements) clear-sky global solar reflectance of a horizontal or near-horizontal surface ( 10 m2) when the sun angle to the normal from the surface (θ) is < 45. ASTM E1918: Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field 10

11 Measurement of e 1. D&S Emissometer Infrared emittance in the range of 5-80μm, ASTM C1371: Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers 11

12 Measurement of e 2. TIR-100 Emissometer Infrared emittance in the range of 2,5-40 μm, EN Flexible sheets for waterproofing. Determination of emissivity 12

13 Measurement of e 3. FTIR Spectrometer with golden sphere Spectral Infrared emittance in the range of 2,5-100 μm EN Glass in building. Determination of the emissivity 13

14 Solar Reflectance Index (SRI) SRI: Radiative properties (solar reflectance and infrared emittance) and convective cooling effects are combined into one scheme. It quantifies how hot a flat surface would get relative to a standard black (reflectivity 5%, emittance 90%) and a standard white surface (reflectivity 80%, emittance 90%). SRI = x x 2 Where : x= ((a e).( hc ) )/ (9.5205e + hc ) a = Solar absorbance (1 - TSR ) e = Thermal emittance hc = Convective coefficient, W.m -2.K -1 5 = low convectional coefficient 12= medium convectional coefficient 30= high convectional coefficient ASTM E1980 : Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces ORNL SRI calculator: LBNL Heat Island group SRI calculator excel sheet: LEED 's SRI Calculator: 14

15 Towards a European standard 20/11/2016 European Cool Roofs Council 15

16 Towards a European standard An interlaboratory comparison (ILC) was organised and conducted between 12 EU labs to provide the ECRC with information regarding its product rating programme under development, aiming to: compare different measurement methodologies (mainly ASTM and European (EN) standards, ) for measuring and calculating (SR) and infrared emittance (e), provide information on their suitability to be used for cool roof products assessment. Share results with CEN/TC 254: Flexible sheets for waterproofing (WG16: Roofing sheet reflectivity) to proceed with the development of an EU standard for SR and emissivity A. Synnefa, A. Pantazaras, M. Santamouris, E. Bozonnet, M. Doya, M. Zinzi, A. Muscio, A. Libbra, C. Ferrari, V. Coccia, F. Rossi, D. Kolokotsa, Interlaboratory Comparison of cool roofing material measurement methods, In Proceedings of Joint Conference 34th AIVC- 3rd TightVent- 2nd Cool Roofs - 1st Venticool, Athens, Greece, Sept , /11/2016 European Cool Roofs Council 16

17 Towards a European standard The 17 samples represent the range of commercially available roofing materials covering the full range of reflectance and emittance values. All product samples have been prepared following specific guidelines 20/11/2016 European Cool Roofs Council 17

18 Towards a European standard spectrophotometers equipped with integrating spheres of 150mm diameter and one large sphere of 75cm diameter 20/11/2016 European Cool Roofs Council 18

19 Towards a European standard A strong correlation between the SR determined by a spectrophotometer (ASTM E903) and a reflectometer (ASTM C1549) was found. (E891 ) (G173) 20/11/2016 European Cool Roofs Council 19

20 Towards a European standard Emissometer (ASTM-EN) measurements Absolute differences as high as 0.08 between the two methods, however overall trends are quite similar. A strong correlation between the two test methods for flat roof products. 20/11/2016 European Cool Roofs Council 20

21 Towards a European standard ECRC participates in CEN TC254 Flexible sheets for waterproofing (WG16: Roofing sheet reflectivity) that will develop a standard for solar reflectance and emissivity A recommendation based on the ILC carried out by the ECRC was sent to CENTC254WG16 CENTC254WG16 has approved this recommendation Agreement between CEN and ASTM in order to convert their document in an European standard (in progress) 20/11/2016 European Cool Roofs Council 21

22 The ECRC Product Rating program 20/11/2016 European Cool Roofs Council 22

23 ECRC Product rating program overview A uniform and credible system for rating and reporting the radiative properties of roofing materials launched in Roofing product manufacturers & sellers will label various roof products with radiative property values Code bodies, architects, building owners, specifiers etc. can have credible radiative properties data The radiative properties that will be reported are the solar reflectance (SR) and the infrared emittance (e) and calculated SRI Radiative properties are determined and verified through testing by ECRC approved test laboratories and a process of random testing of rated products The ECRC product rating program does not specify minimum or target values for any radiative property 20/11/2016 European Cool Roofs Council 23

24 ECRC adopted standards Solar reflectance: 1. ASTM E ASTM C CRRC-1 Test Method #1 Variegated Roofing Products: CRRC-1 Test Method #1. Tile Products : CRRC-1 Test Method 1 or the Template method SRI: ASTM E1980 Infrared Emittance: 1. ASTM C EN Low conductivity materials: Any product not on an uninsulated metal substrate shall be tested using the Slide Method. Profiled products: Measurement of products having cylindrical surfaces products shall be done according to the method described in the Devices & Services Technical Note TN /11/2016 European Cool Roofs Council 24

25 The ECRC Product rating program ECRC Accredited/ approved labs Rated roof products 20/11/2016 European Cool Roofs Council 25

26 ECRC accredited/approved test labs Independent or manufacturer test labs ISO accredited for ECRC approved measurement methods Participate in QA procedures Independent test labs that have initiated process for ISO accreditation for ECRC approved measurement methods Pass the ILC test Participate in QA procedures valid only for the 1 st year of operation of the ECRC PRP and only if in a country there are no ISO accredited labs for the specific method 20/11/2016 European Cool Roofs Council 26

27 ECRC accredited/ approved test labs 20/11/2016 European Cool Roofs Council 27

28 Product rating process 20/11/2016 European Cool Roofs Council 28

29 Product rating process 20/11/2016 European Cool Roofs Council 29

30 Rated Products database Rated Products will remain in the database for 3 years 20/11/2016 European Cool Roofs Council 30

31 ECRC Product Rating Manual

32

33 Rated products

34 Rated products SR: e 0.89 SR: e 0.89 SR: e 0.89

35 Quality assurance procedures ILC test for laboratories participating in the ECRC PRP Random testing of Rated Roofing Products Organized once per year ensure consistency and competence of the laboratory by evaluating the test results against the other laboratory values Periodically select Rated Roofing Products, obtain them from the marketplace or from the point of manufacturing, and have them tested by an ATL 35

36 Future developments 20/11/2016 European Cool Roofs Council 36

37 Deterioration of cool roofs Ageing Weathering + Soiling WEATHERING UV (mostly) and visible radiation Thermal cycling Moisture Degradation SOILING Dry and wet deposition of atmospheric aerosols and suspended dust Microbiological growth 20/11/2016 European Cool Roofs Council 37

38 Deterioration of cool roofs Initial condition Condition after 2.5 natural month of exposure Condition after 2.5 month of natural exposure Initial condition Aging can alter the radiative properties of roofing materials. Products suffer significant loss of SR, especially those with high initial solar reflectance while products with very low initial solar reflectance (SRin<0.2) tend to become more reflective as they age Significant differences among product types & different climatic conditions 20/11/2016 European Cool Roofs Council 38

39 Deterioration of cool roofs (Sleiman et al. 2011, Solar Energy Materials & Solar Cells) For roof products with high initial solar reflectance, ageing might yield to a mean absolute loss of about 0.16 after three years of natural exposure at low or moderately polluted non-urban or suburban sites, In European metropolitan areas the mean absolute loss of solar reflectance of highly reflective materials after at least 2 years of natural exposure ranges from 0.14 to /11/2016 European Cool Roofs Council 39

40 Deterioration of cool roofs Ageing significantly affects the performance of cool roofs by increasing the roof surface temperature and by reducing the cooling load savings by an average 20-30%. Aged cool roof product rating is critical. 20/11/2016 European Cool Roofs Council 40

41 ORNL ATLAS Ageing assessment Natural weathering: exposing samples to outdoor ambient conditions (direct sunlight and other elements of weather) at exposure sites (weathering farms) with different climatic conditions -ASTM G7, ISO 877, ISO 2810 etc. 3 year exposure 20/11/2016 European Cool Roofs Council 41

42 Q-Lab Ageing assessment Artificial weathering: Artificial weathering: accelerated degradation and studying the material s behavior under controlled environmental conditions in the lab and in a reasonably fast time. They consist of light sources e.g. UV lamps or filtered xenon arc lamp to simulate the effect of sunlight. T monitoring and control is performed by a black panel T sensor which controls the specimen s surface T and simultaneously by the chamber air T control to give the ultimate determination of the specimen temperature. The effects of outdoor moisture are simulated by direct, pure water spray and by relative humidity control -ISO11341, ASTM G 155 Soiling not taken into account 20/11/2016 European Cool Roofs Council 42

43 Ageing assessment LBNL Laboratory Aging Protocol : an accelerated aging method that incorporates features of soiling and weathering. The method sprays a calibrated aqueous soiling mixture onto preconditioned coupons of roofing materials, and then exposes the soiled coupons to UV radiation, heat and water in a commercial weatherometer. It reproduces the three-year aged values of solar reflectance (M. Sleiman, et al., 2014) A variant of the LBNL protocol was tested to reproduce the aging conditions in Italian urban areas, for roofing membranes, clay tiles, and façade finish coats with promising results (Paolini et al, 2014) -ASTM D : Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance 20/11/2016 European Cool Roofs Council 43

44 Future developments Taking into account that in order to assess a cool roof product s long-term performance it is necessary to measure the aged product s radiative values, the ECRC is currently actively working towards adopting a system for the rating of aged products. Integration of natural weathering in the ECRC product rating program Collaboration with LBNL in testing the applicability and adapting the accelerated aging protocol to European conditions 20/11/2016 European Cool Roofs Council 44

45 Thank you! 20/11/2016 European Cool Roofs Council 45

46 The sole responsibility for the content of this presentation lies with the authors. It does not necessarily reflect the opinion of the European Union. Neither the EASME nor the European Commission are responsible for any use that may be made of the information contained therein.