IVR2-SPI Solid State Illuminated Rail 2 Slim Post Integral Power Supply

Size: px

Start display at page:

Download "IVR2-SPI Solid State Illuminated Rail 2 Slim Post Integral Power Supply"

Scott McLaughlin
6 years ago
Views:

1 IVR2-SPI Solid State Illuminated Rail 2 Slim Post Integral Power Supply.83 (7/8 ) 160 OPENING 1.90 (1 7/8 ) E xac t decimal and common fr ac tion is sho w n Ends o f Ill uminated r ail f iel d cu t t abl e t o a minimum o f 2 1/ 8 in l eng t h. Illuminated rail is available with a minimum length of and maximum length of 1.75 U.S. Patent # D615,217S issued Other patents pending Post spacing on center is a maximum of 60 and a minimum of 2 Photometric DaT L ED:.6W High Ou tpu t CCT: 000K Illuminated Rail L eng th: 1 Rail Height: Post Spacing: 8 60 Flood 20 Narrow 30 symmetrical Internal Rail : He av y du t y ex tr uded 6061-T6 luminum ll o y. External Rail Jacket: v ail abl e in 30 or 316 s t ainl e s s s teel. S t andard aluminum f inishe s include silv er, w hite, bl ack, or bron ze po w dercoat. C onsult f ac tor y for cus tom po w der coat f inishe s ( M 260 ). LED Light Source Cl o sely packed ar r ay of small L EDs all o w for smooth seaml e s s illumination w ith immediate o v er l ap to av oid pixil ation and pro v ide a continuous f l o w of l ight. C ol or temper ature s op tions include K, K, 350 0K or 0 0 0K. 85 CRI 50,0 0 0 hour s of av er age r ated l ife at 70% output L ED component s are e asily acce s sibl e to all o w for e as y maintenance Ma x imum r un l eng th per dr i v er: 8 (HO) Ma x imum r un l eng th per dr i v er: (SHO) led light engine (per foot): High Output System Power Consumptopm:.6W C ool W hite 0 0 0K : 21 l m Neu tr al W hite 350 0K : 20 7 l m W ar m W hite K : 202 l m W ar m W hite K : 19 7 l m Super High Output (Integral driver required on each post) System Power Consumptopm: 9.2 W C ool W hite 0 0 0K : 8 3 l m Neu tr al W hite 350 0K : 15 l m W ar m W hite K : 0 l m W ar m W hite K : 395 l m Light Distribution & Output T he V-Rail op tic al s y s tem include s a unique re f l ec tor that all o w s you to pu t the l ight w here it is needed. Fac tor y pre se t dis tr ibu tions include 60 s y mme tr ic, 20 s y mme tr ic and 30 v-rail L/M P-1 asymmetric. Optical Lens System High-impac t acr y l ic l ens is s e al ed w i th sil icon. L ens is secured w ith (2) counter sunk f l ush scre w s, (1) at e ach end. Vandal r e sis t ant T OR X is al so av ail abl e. C onsult f ac tor y. Reflector System Inter nal re f l ec tor s y s tem is cons tr uc ted o f an inno v ati v e mater ial that has 9 9% r e f l ec t ance proper tie s. Re f l ec tor all o w s up to 1 0 tot al adjus tment. Right to l e f t side r e f l ec tor panel s are independently adjus t abl e f rom -30 to 70. W hen the ou ter re f l ec tor panel is adjus ted to w ard a s t air w ay, r amp or w al k w a y, the re f l ec tor panel w ill ac t as a gl ar e shiel d f rom dis t ant v ie w ing angl e s bel o w an el e v ated plat form. Each r ail suppor t is secur ed to the s w i v el mount on specif ied mounting s y s tem. Po s t or embedded mount is av ail abl e. S ee mounting submit t al shee t s for de t ail ed infor mation. surface simulated natural finishes vail abl e in 12 s t andar d w ood gr ain po w der coated finishes Consult factor y emergency Remote emer genc y in v er ter a v ail abl e. C an be remote up to 0 0 f t. See I-IIS speci f ic ation sheet. Listings 5-Year Intense LED Limited Warrant y (L ED & Po w er Supply Only) UL We t L oc ation L is ted. Fil e #E ID approved D compl iant

2 IVR2-SPI - 2 Slim Post Mount ssembly 1/ 2 35 (Max angle) 2 OD 1.8 ID Dimensions Guard Rail Hand Rail ase Specification 3x Pos t mount as sembly is av ail able in heav y dut y s teel alloy or No. polished 30 s t ainle s s s teel. S t andard aluminum f inishe s include silver, w hite, bl ack, or bronze powder-coat. Consult factor y for custom po w der coat f inishe s ( M 260 ). Maintenance Pos t s include a dri ver acce s s door w here po w er supply component s are easily acce s sible. Tamper proof hard w are and special tool s are s t andard and included. power supply Lutron Hi-Lume -Serie s Dri ver is a high-per formance L ED dri ver that prov ide s smooth, continuous 1% dimming. See driver specifications. Dimming Range: 0% to 1% Oper ating Volt age: /60Hz Rated lif time of 50,000 hr t c Po w er Fac tor: > 0.9 at 0 W S t andb y Po w er Consumption: < 1.0 W Tot al Harmonic Dis tor tion: < 20% at 0 W Inr ush Current: < 2 Pos t are to be spaced at a ma ximum of 60 and minimum of 2 on center s. Pos t mount is to be sur f ace mounted to concrete utilizing 3 / 8 anchor bolt s (supplied b y other s). nchoring means mus t be determined b y loc al code s. Not to be supplied or engineered by Intense Lighting. See pos t mount ins t all ation char t for more information. nchorage template available by request. Operation Pos t w ith integr al po w er supply w ill po w er up-to 83 1/ 2 of illuminated r ail. High output L ED only. Super high output not av ail able. Fittings Consult f ac tor y for s t andard f it tings and epox y weld adhesive specification. Post Specification Post Mount Installation Detail Level Post Output (2V DC) Ser vice ay Opening IMPORTNT: Seal end of conduit with good grade RT V to prevent moisture entering compartment LED Power Supply Grout as required to level posts for uneven or grades not level Electrical 1/2 conduit (max) Stub-up, In and out access (by others) 6 above grade. Input (120 / 277V) nchors supplied and approved by others. Note: Conduit feed only required when installing post with integral power supply. Typically every other post will require conduit feed. v-rail L/M P-2

3 IVR2-SPI - 2 Slim Post Embedded ssembly (Max angle) 35 Dimensions Guard Rail Hand Rail Grade Level Embedded mount as sembly is av ail able in heav y dut y s teel alloy or No. polished 30 s t ainle s s s teel. S t andard aluminum f inishe s include silver, w hite, bl ack, or bronze powder-coat. Consult factor y for custom powdercoat finishes( M 260). Maintenance Pos t s include a dri ver acce s s door w here po w er supply component s are easily acce s sible. Tamper proof hard w are and special tool s are s t andard and included. Power supply Lutron Hi-Lume -Serie s Dri ver is a high-per formance L ED dri ver that prov ide s smooth, continuous 1% dimming. See driver specifications. Dimming Range: 0% to 1% Oper ating Volt age: /60Hz Rated lif time of 50,000 hr t c Po w er Fac tor: > 0.9 at 0 W S t andb y Po w er Consumption: < 1.0 W Tot al Harmonic Dis tor tion: < 20% at 0 W Inr ush Current: < 2 Pos t are to be spaced at a ma ximum of 60 and minimum of 2 on center s. Embedded mount pos t are se t into pl ace using Rockite or Kw ixse t anchor cement. minimum of 6 pos t mus t be embedded into concrete to structurally secure pos t. nchoring means mus t be determined b y loc al code s. Not to be supplied or engineered b y Intense L ighting. See Embedded Mount Ins t all ation char t for more information. Operation Pos t w ith integr al po w er supply w ill po w er up-to 83 1/ 2 of illuminated r ail. High output L ED only. Super high output not av ail able. Fittings Consult f ac tor y for s t andard f it tings and epox y weld adhesive specification. 6 ( T V P) 2 OD 1.8 ID *Notif y Intense Lighting if other embedment dimension required. Post Specification Level Post Embedded Installation Detail Output (2V DC) Ser vice ay Opening LED Power Supply IMPORTNT: Seal end of conduit with good grade RT V to prevent moisture entering compartment Rockite nchor Cement (or equal) Field wiring connects to internal terminal block. Electrical 1/2 conduit (max) Stub-up, In and out access (by others) 6 above grade. v-rail L/M P-3 Input (120 / 277V) Concrete (by others) Note: Conduit feed only required when installing post with integral power supply. Typically every other post will require conduit feed. 6 urial Depth* *Cored hole dimensions to be determined by others per local codes.

Lutron Hi-lume -Series Driver Maximum Driver-to-LED Light Engine Wire Length Wire Gauge Maximum Lead Length 15 f t (.5 m) 16 25 f t (7.5 m) 1 0 f t (12 m) 12 60 f t ( m) Width: 1. Height: 1.

4 Lutron Hi-lume -Series Driver Maximum Driver-to-LED Light Engine Wire Length Wire Gauge Maximum Lead Length 15 f t (.5 m) f t (7.5 m) 1 0 f t (12 m) f t ( m) Width: 1. Height: Length: DESCription Hi-lume -Series Driver is a high-per formance LED driver that prov ides smooth, continous 1% dimming. Features Continout s, flicker free dimming from 0% to 1% Compac tible w ith Energi Sav r Node w ith EcoSystem unit, QS control unit, Pow Pak dimming allow ing for integration into a pl anned or existing EcoSystem lighting control solution. Standard 3-w ire line-voltage phase-control technolog y for consistent dimming per formance and compatibilit y with all Lutron 3-w ire fluorescent controls. Rated lifetime of 50,000 t c UL recognized for United States and Canada RoHS Compliant Constant Voltage Driver w ith Pul se W idth Modul ation (P W M) dimming Performance Dimming Range: 0% to 1% Operating Voltage: V ~ at 50/60Hz Rated lifetime of 50,000 t c Patented thermal foldback protection LEDs turn on to any dimmed level w ithout going to full brightness Nonvol atile memor y restores all driver set tings af ter power failure Power Fac tor: > 0.9 at 0 W Standby Power Consumption: < 1.0 W Total Harmonic Distor tion (THD): < 20% at 0 W Inrush Current: < 2 Inrush Current Limit ting Circuitr y: eliminates circuit breaker tripping, s w itch arcing and rel ay failure Open circuit protected Shor t circuit protected Turn-on time: 1 second P W M Dimming Frequenc y: 550Hz environmental Sound Rating: Cl as s Rel ative Humidit y: Maximum 90% non-condensing Minimum operating ambient temperature t a = 32 F (0 C) standards Meet s NSI C62.1 categor y surge protec tion standards up to and including k V FCC Par t 15 compliant for commercial applications at 120 V ~ or 277 V ~ UL 8750 recognized Driver wiring and mounting Terminal blocks on the driver accept one solid w ire per terminal from to 16 W G (0.75 to 1.5 mm 2 ) Fix ture must be grounded in accordance w ith local and national elec trical codes Listings UL Recognized for United States and C anada RoHS Compliant FCC Compliant v-rail L/M P-

5 IVR2-SPI Solid State Illuminated Rail Specification Guide Example: I V R2-SPI-ST-P36-HO27-60S-EM (Specify quantity by foot) C D E F G H Family C Mounting/Height E Color Temperature G Electrical IVR2-SPI 1.9 OD w/ Integral Power Supply Finish -P36 -P2 -E36 -E2 36 Post Mount 2 Post Mount 36 Embedded Mount 2 Embedded Mount K 3000K 3500K 000K blank Lutron Hi-Lume -Series 120/277V Driver H Options -ST -W - -R -SV -SU -C 1 30 Stainless Steel White luminum lack luminum ronze luminum Silver luminum Surface 2 3 Custom -HO -SHO D LED Output High Output Super High Output -60S -20S -30S F Light Distribution 60 Symmetric 20 Symmetric 30 symmetric -I Infill 3 Note s: S t ainl e s s s t eel a v ail abl e b y spe cial or der 2. See Sur face simul ated natur al f inishe s submi t t al sheet for specification 3. Special order, consult factor y. In t egr al dr i v er r equir ed on e ach po s t Specification and Delivery Process rchitec tur al dr aw ings or det ailed ele v ation dr aw ings are required for a V-Rail quot ation. photome tric l ayout w ill be prov ided if reque s ted. Once an order is pl aced, Intense L ighting will provide detailed shop drawings for approval V-Rail w ill be deli v ered to the job site read y for ins t all ation. det ailed as sembly dr aw ing w ill be pro v ided along w ith dimensions and loc ations for remote po w er supplie s. ll produc t s included w ill be l abeled clear ly to match the as sembly dr aw ing. Cer t ain tool s and equipment w ill be required for the as sembly of V-Rail. det ailed lis t of tool s c an be found in the V-Rail Ins t all ation Guide. Ins t all ation guide av ail able upon reque s t, consult f ac tor y Photometric Layout Shop Drawing / ssembly Guide Snap Shot # 2 Scale 1" = 5' Notes: Completed Project v-rail L/M P-5

IVR2-SPI 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply

IVR2-SPI 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply 1.9 Solid State Illuminated Rail 2 Slim Post Integral Power Supply.83 (7/8 ) 160 OPENING 1.90 (1 7/8 ) E xac t decimal and common fr ac tion is sho w n Ends o f Il l umina t e d r ail f iel d cu t t abl