Morris Products 53 Carey Road, Queensbury, NY 12804

Transcription

1 Catalog Number UPC Number Description LED Ultra Thin Recessed Canopy Fixture 40W Voltage: 120/208/240/277 Shown with optional recessed mounting Bezel/Trim Cat# QPL ID # P29AE57D Features Integral Cooling Fin Releases the Heat Efficiently to Maintain the Life of LEDs and LED Driver Corrosion Die Cast Aluminum Housing Prismatic Polycarbonate Lens Superior Architectural White Powder Coat Finish LG LEDs Stainless Steel Hardware 5 Threaded Apertures - (1) Back, (4) Sides 50,000+ Hour Life Expectancy General Material: Lens: Finish: Lamp Type: Photocell: Color Temperature: Diecast Aluminum Housing Prismatic Polycarbonate Lens White Powdercoat LED Array Optional 5000K Dimension Information Length: 8-3/4" Width: 8-3/4" Height: 3-5/16"" Specifications Color Temperature: 5000K Lumens: 4302 Temperature Rating: Voltage Rating: Wattage Rating: Light Pattern: CRI: Packaging Box Qty 1-40 F to 131 F 120/208/240/277 40W 148 Beam Angle 73 Certifications culus DLC IP65(Nema 4X) Warranty Yes Yes Yes 5 Year Morris Products 53 Carey Road, Queensbury, NY 12804

2 LM Test Report For Morris Products Inc. 53 Carey Rd. Queensbury, NY Model name(s): Representative (Tested) Model: Model Difference: All construction and rating are the same, except CCT. Test & Report By: Johnson Sun Engineer: Johnson Sun Date: May.13, 2016 Review By: Manager: Tommy Liang Note: This report does not imply product certification, approval, or endorsement by NVLAP, NIST, or any agency of the Federal Government. 1 / 20

3 Model name CCT(K) Total Luminous (lm) Power (W) Luminous Efficacy (lm/w) K *1: This value is calculated and the calculation formula is as below: = ( ) / = ( ) / = ( ) / = ( ) / *2: This value is calculated and the calculation formula is as below: 40.07= ( ) /2 *3: This value is calculated and the calculation formula is as below: 99.56=3989.5/ =4093.9/ =4198.2/ =4302.6/ / 20

4 U.S. Department of Energy Lighting Facts TM Uniform LM-79 Reporting Template Laboratory Information: Name of Test Laboratory Standard-Tech Co. Ltd Date of Test Report May.13, 2016 Test Report No. Laboratory Contact Name Product Information: Organization Name Brand Name Model Number SKU (if available) Type of Luminaire (for integral lamps, list base type and lamp type) STD160411NB-A Tommy Liang N/A N/A Luminaire Aperture (for downlights) -- in. Luminaire Length -- mm Luminaires Width -- mm Number of Units (modular products) Morris Products Inc Walkway & Garage Lighting N/A Electrical Measurements: Integrating Sphere Output 4 / 20 Goniophotometer Output Input Wattage W Input Current A Input Voltage (ac) V Power Factor Off-State Power 0 -- W Photometric Characteristics Total Initial Lumen Output lm Initial Lumen Efficacy lm/w Correlated color temperature / CCT K Color rendering index / CRI R9 Value 0 -- Duv Luminous Intensity Distribution Center beam candlepower (if applicable) Beam angle (if applicable) Zonal lumens in the 0-60 zone % Zonal lumens in the zone % Zonal lumens in the zone % Zonal lumens in the zone % cd

5 Date of Receipt : Apr.10, 2016 Date of Test : Apr.12, 2016 Test item : Total Luminous Flux, Luminous Distribution Intensity, Luminous Efficacy, Correlated Color Temperature, Color Rendering Index, Chromaticity Coordinate, Electrical parameters Reference Standard IES LM Electrical and Photometric Measurements of Solid-State Lighting Products ANSI C Specifications for the Chromaticity of Solid State Lighting Products CIE Method of Measuring and Specifying Colour Rendering Properties of Light Sources CIE Technical Report Colorimetry IESNA LM Practical Guide to Colorimetry of Light Source IESNA TM Technical Memorandum on Light Emitting Diode (LED) Sources and Systems Reference Work QD25 Instruction Test Methods 1. Photometric and Electrical measurements Light Distribution Method: Photometric parameters were measured using the goniophotometer and software. The ambient temperature shall be maintained at 25 C ± 1 C, measured at a point not more than 1 m from the sample and at the same height as the sample. The sample was operated at 120 Volts AC, 60Hz. It was stabilized before measurement was made. Luminous flux, luminaire efficacy, zonal lumen were calculated from the software taken at 1 vertical intervals and 22.5 horizontal intervals. 2. Photometric and Electrical Measurements Integrating Sphere Method: Photometric parameters were measured using an integrating sphere, a spectroradiometer and software. The ambient temperature condition inside the sphere was maintained at 25ºC ± 1ºC. The sample measurements were made using a spectroradiometer connected by a fiber optic cable and detector through the detector port of the integrating sphere. The sample was operated at 120 Volts AC, 60Hz. It was stabilized before measurement was made. Chromaticity coordinates, correlated color temperature and color rendering index were calculated from the spectral radiant flux measurements taken at least 5 nm intervals over the range of 380 to 780 nm. 5 / 20

6 1. Product Information: Brand Name Model Number Luminaire Type Rated Voltage / Frequency Nominal Power Rated Initial Lamp Lumen -- N/A 100 ~ 277 Vac, 50/60Hz 40W Declared CCT 5000K, LED Manufacturer LED Model LG INNOTEK Development LEMWA33X80LX3000 Sample Receipt Date Apr.10, 2016 Sample Number Walkway & Garage Lighting STD160411NB-A1(3000K),A2(5700K) Photo 6 / 20

7 Spectral Power Distribution & Chromaticity Diagram 8 / 20

8 Zonal Lumen Tabulation Zonal Lumen Summary Zone Lumens % Luminaire % % , % , % % % , % % , % Lumens Per Zone Zone Lumens % Total Zone Lumens % Total % % % % % % % % % % , % % % % % % % % 9 / 20

9 Photometric Data Illuminance Plots 10 / 20

10 ISOCANDELA DIAGRAM ISOLUX DIAGRAM 11 / 20

11 Candela Table - Type C / 20

12 / 20

13 / 20

14 / 20

15 / 20

16 / 20

17 2.2 Electrical, Photometric and Chromaticity Measurements (Refer to Work Instruction QD25) IES LM Test date Test Ambient: 25.2 ºC Test Orientation Horizontal Stabilization Time (min) 90 Model Number Electrical Measurement : Sample No. Voltage (Vac) Frequency (Hz ) Current (A) Power (W) Power Factor THD % STD NB-A Sphere-Spectroradiometer Method: Parameter Result Special Color Rendering Indices Test Voltage (V) R1 69 R9 0 Frequency (Hz) 60 R2 75 R10 44 Color Rendering Index (CRI) 71.6 R3 82 R11 74 R9 0 R4 73 R12 57 CCT (K) 5406 R5 72 R13 69 Chromaticity (x, y) x= y= R6 70 R14 90 Chromaticity (u, v ) u'= v'= R7 77 R15 61 Duv R Total Initial Lumen Output(lm) 4407 Initial Lumen Efficacy(lm/w) Sphere-Spectroradiometer Method: Parameter Result Test Voltage (V) Frequency (Hz) 60 Total Initial Lumen Output(lm) 4373 Initial Lumen Efficacy(lm/w) / 20

18 Spectral Power Distribution & Chromaticity Diagram 19 / 20

19 3. Test Equipment Equipment ID Equipment Name Last Calibration Date Next Calibration Date ST-R meter Integrating Sphere ST-R-331 Spectral analysis system HAAS D204 Standard Lamp PF2010 Power Meter for Integrating Sphere EE-09 Goniophotometer system D908S Standard Lamp PF210 Power Meter for Goniophotometer ST-R-181A Temperature Tester Uncertainty: Photometric Measurement (Sphere):1.74% Chromaticity Measurement(Sphere):14.3K Photometric Measurement(Goniophotometer):1.62% ****** END OF DATASHEET PACKAGE ****** 20 / 20