5700XP *MM401* (Electric) ( ) Walk -Behind Scrubber Parts Manual. North America / International. The Safe Scrubbing Alternative R

Transcription

1 00XP (Electric) ( ) Walk -Behind Scrubber Parts Manual The Safe Scrubbing Alternative R R ES Extended Scrub System North America / International MM40 Rev. 0 (09-00) *MM40*

2 When ordering replacement parts, use the illustrated parts list section in this manual. Before ordering parts or supplies, be sure to have your machine model number and serial number available. Only use TENNANT Company supplied or equivalent parts. Parts and supplies may be ordered online, by phone, or mail from any authorized parts and service center, distributor or from any of the manufacturer s subsidiaries. This machine will provide excellent service. However, the best results will be obtained at minimum costs if: S The machine is operated with reasonable care. S The machine is maintained regularly - per the machine maintenance instructions provided. S The machine is maintained with manufacturer supplied or equivalent parts. MACHINE DATA Please fill out at time of installation for future reference. Model No. -- Serial No. -- Machine Options -- Sales Rep. -- Sales Rep. phone no. -- Customer Number -- Installation Date -- Tennant Company PO Box 4 Minneapolis, MN 440 Phone: (800) --80 or () FaST -PAK is a US registered and unregistered trademark of Tennant Company. Specifications and parts are subject to change without notice. Copyright E , TENNANT, Printed in U.S.A.

3 This section on HOW TO USE THIS MANUAL will tell you how to: -- Find important machine information for ordering correct repair parts. -- Find TENNANT part numbers. -- Order TENNANT parts and supplies. HOW TO USE THIS MANUAL HOW TO USE THIS MANUAL IMPORTANT INFORMATION When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual. The model number of your machine is on the side of the machine. The serial number of your machine is printed on the machine data plate located as shown. 00XP MM40 ( -9) -

4 HOW TO USE THIS MANUAL FINDING A TENNANT PART NUMBER This manual contains the following sections: -- HOW TO USE THIS MANUAL -- STANDARD PARTS -- OPTIONS -- BREAKDOWNS -- CROSS REFERENCE The STANDARD PARTS section lists repair parts for standard machines. They are grouped in this general order: -- General wear parts. -- Machine frame and related parts. -- Machine propelling system. -- Scrubbing components. -- Electrical parts. The OPTION section lists repair parts of options. The BREAKDOWN section lists available repair parts of major components. All sections in this manual consist of parts illustrations and corresponding parts lists. The parts illustrations are numbered with Ref numbers which refer to corresponding parts lists. The parts lists include a number of columns of information: -- Ref -- column refers to the reference number on the parts illustration. o -- indicates the part is an assembly. -- indicates the part is included in the assembly listed just before it. -- Part No. -- column lists the TENNANT part number for the part. -- Serial Number -- column indicates the set of machines the part number is applicable to. Serial numbers change when the machine design has been modified. The most current design of the machine is shown in the main illustration, older designs are boxed in a corner of the illustration. -- Description -- column is a brief description of the part. -- Qty. -- column lists the quantity of that part used in that area of the machine. - 00XP MM40 (9-0)

5 HOW TO USE THIS MANUAL NOTE: If a service kit is installed on your machine, be sure to keep the INSTRUCTION BULLETIN which came with the kit. It contains repair parts numbers needed for ordering future parts. NOTE: Fasteners used in this machine may be metric or non-metric. Take care when replacing hardware to replace with same thread size. PLACING AN ORDER Orders may be placed by phone, fax, or by mail. Phone orders may need written confirmation. Follow the steps below to insure prompt delivery:. Identify the model number of your machine.. Identify the serial number of your machine.. Find the part number of the part you need. Do not order by page number or reference number. If you are not able to find the part number, call your TENNANT representative for help or send the old part as a sample. 4. Determine the quantity of the part you need.. Provide the following company information: -- Company name -- Customer ID Number -- Shipping address -- Billing address -- First and last name of person ordering parts -- Telephone number -- Purchase order number. Provide definitive shipping instructions. 00XP MM40 ( -9) -

6 HOW TO USE THIS MANUAL Any claim for loss or damage to a shipment in transit should be filed promptly with the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicates items back ordered. If parts received are suspected to be incorrect or defective, please contact the TENNANT representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required XP MM40 ( -9)

7 STANDARD PARTS SECTION Contents Page Contents Page Fig. -- Genreal Recommended Maintenance Items... - Fig. -- Brushes, Replacement, Model 00, 00 mm (8 in) Fig. -- Brushes, Replacement, Model 800, 800 mm ( in)... - Fig Brushes, Replacement, Model 900, 900 mm ( in) Fig. -- Main Frame and Drive Group Fig. -- Tire and Rim Assembly, Black... - Fig. -- Scrub Head Lift Group Fig Scrub Head Kit, Model 00D, 00 mm (8 in)... - Fig Scrub Head Kit, Model 800D, 800 mm ( in) Fig Scrub Head Kit, Model 900D, 900 mm ( in)... - Fig. -- Scrub Head Kit, Model 800D Heavy Duty, 800 mm ( in) Fig. -- Scrub Head Drive Group, Model 00C, 00 mm (8 in)... - Fig. -- Scrub Head Frame Group, Model 00C, 00 mm (8 in) Fig Scrub Head Drive Group, Model 800C, 800 mm ( in) Fig. -- Scrub Head Frame Group, Model 800C, 800 mm ( in)... - Fig. -- Scrub Head Drive Group, Model 900C, 900 mm ( in) Fig. -- Scrub Head Frame Group, Model 900C, 900 mm ( in)... - Fig Recovery Tank Group ( ) Fig Recovery Tank Group (009-- ) Fig Solution Tank Group Fig. -- Vacuum Fan Group Fig. -- Solution Control Group Fig. -- Battery Group Fig Steering Control Group Fig. -- Operator Console Group ( )... - Fig. -- Operator Console Group (094-- ) Fig. -- Electrical Panel Group ( )... - Fig Electrical Panel Group ( ) Fig Squeegee Lift Group Fig Squeegee Auto Lift Group... - Fig. -- Squeegee Linkage Group Fig. -- Squeegee Tight--Aisle Group, 0 mm ( in)... - Fig. -- Squeegee Group, Model 00, 00 mm (8 in) Fig Squeegee Group, Model 800, 800 mm ( in) Fig. -- Squeegee Group, Model 900, 900 mm ( in)... - Fig. -- Electrical Schematic ( ) Fig. -- Electrical Schematic ( )... - Fig Electrical Wire Harness Group ( ) Fig Electrical Wire Harness Group ( ) Fig Label Group XP MM40 (9-0) -

8 STANDARD PARTS - 00XP MM40 ( -98)

9 STANDARD PARTS Fig. - Genreal Recommended Maintenance Items 00, XP, NA, CE 8 ( ) Blade, Squeegee,Front, 8 8 ( ) Blade, Squeegee,Rear, 8 o 4 ( ) Squeegee Kit F/Tile Gumrbr 00 8 ( ) Blade, Squeegee,Tile, 8 8 ( ) Blade, Sqge,Rear,Gum, 8 o 48 ( ) Squeegee Kit Oil Rs Urethn 00 9 ( ) Blade, Sqge, Front, 8, Oil Rst 89 ( ) Blade, Sqge, Rear, 8, Oil Rst 4 ( ) Blade, Squeegee,Front, 4 ( ) Blade, Squeegee,Rear, o 4 ( ) Squeegee Kit F/Tile Gumrbr ( ) Blade, Squeegee,Tile, 8 ( ) Blade, Sqge,Rear,Gum, o 49 ( ) Squeegee Kit Oil Rs Urethn ( ) Blade, Sqge, Front,, Oil Rst 88 ( ) Blade, Sqge, Rear,, Oil Rst 4 ( ) Blade, Squeegee,Front, 4 ( ) Blade, Squeegee,Rear, o 44 ( ) Squeegee Kit F/Tile Gumrbr ( ) Blade, Squeegee,Tile, 4 ( ) Blade, Sqge,Rear,Gum, o 4 ( ) Squeegee Kit Oil Rs Urethn ( ) Blade, Sqge, Front,, Oil Rst 4 ( ) Blade, Sqge, Rear,, Oil Rst 0 ( ) Wheel,.0 Dia 4 88 ( ) Nut Speed,Retainer,.--0 Thd 8 ( ) Roller, Bumper 40 ( ) Wheel,.0 Dia 40 ( ) Skirt Assy, Disk Head, 8 4 ( ) Skirt Assy, Disk Head, 4 ( ) Skirt, Assy, Disk Head, o ( ) Replm Kit, Brush Skirts 80 ( ) Skirt, Scrub Head 4 ( ) Skirt, Deflector 8 ( ) Skirt, Deflector 00 ( ) Detergent Pkg, Liter, Sgl, ( ) Detergent Pkg, Liter, Sgl, ( ) Detergent, Liter [Fast 9] -- 00XP MM40 (9-0) -

10 STANDARD PARTS Fig. - Brushes, Replacement, Model 00, 00 mm (8 in) XP MM40 ( -0)

11 STANDARD PARTS Fig. - Brushes, Replacement, Model 00, 00 mm (8 in) 00-8in, NA, CE 04 ( ) Brush--Scr Grout 8 Lg 8Sr Poly 404 ( ) Brush--Scrub 8 Lg 8Sr Poly 0 ( ) Brush--Scrub 8 Lg 8Sr Nylon 0 ( ) Brush--Scrub 8 Lg 8Sr Ab o ( ) Brush--Disk Scr 4 D Assy--Nylon 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o 0 ( ) Brush--Disk Scr 4 D Assy--Poly 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o ( ) Brush--Disk Scr 4 D--Assy--Ab 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o ( xxxxxx ) Driver, Pad 4 D Assy (Replaced by 004) ( xxxxxx ) Bracket, Spring Retainer ( xxxxxx ) Spring, Brush Retaining 0 9 ( xxxxxx ) Adaptor, Brush 8 ( xxxxxx ) Spacer, Pad Holder 98 ( xxxxxx ) Holder, Pad o 004 ( xxxxxx-- ) Driver, Pad 4 D Assy ( xxxxxx-- ) Back, Pad Drive W/Face 4 Dia. 9 ( xxxxxx-- ) Adaptor, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 499 ( xxxxxx-- ) Bracket, Spring Retainer ( xxxxxx-- ) Centering Device, F/Pad Driver ( xxxxxx-- ) Scr Panssm 4X ( xxxxxx-- ) Washer, Flat, #8, Ss 084 ( xxxxxx-- ) Washer, Flat, 0. Ss 4 ( xxxxxx-- ) Screw, Pan, M X.0 X, Ss 4 ( ) Pad, Polish 4D White ( ) Pad, Buff 4D Red ( ) Pad, Scrub 4D Blue ( ) Pad, Strip 4D Brown 009 ( ) Pad, Strip--Hd 4D Black 00XP MM40 ( -0) -

12 STANDARD PARTS Fig. - Brushes, Replacement, Model 800, 800 mm ( in) XP MM40 ( -0)

13 STANDARD PARTS Fig. - Brushes, Replacement, Model 800, 800 mm ( in) 00 - in, NA, CE 0 ( ) Brush--Scr Grout Lg 8Sr Poly 404 ( ) Brush--Scrub Lg 8Sr Poly 08 ( ) Brush--Scrub --Lg--8Sr--Nyl 09 ( ) Brush--Scrub Lg 8Sr Ab o 04 ( ) Brush--Disk Scr D--Assy--Nyl 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o 04 ( ) Brush--Disk Scr D Assy Poly 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o 0 ( ) Brush--Disk Scr D--Assy--S Ab 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o 0 ( xxxxxx ) Driver, Pad D Assy (Replaced by 00) ( xxxxxx ) Bracket, Spring Retainer ( xxxxxx ) Spring, Brush Retaining 0 9 ( xxxxxx ) Adaptor, Brush 8 ( xxxxxx ) Spacer, Pad Holder 98 ( xxxxxx ) Holder, Pad o 00 ( xxxxxx-- ) Driver, Pad D Assy 4 00 ( xxxxxx-- ) Back, Pad Drive W/Face Dia. 9 ( xxxxxx-- ) Adaptor, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 499 ( xxxxxx-- ) Bracket, Spring Retainer ( xxxxxx-- ) Centering Device, F/Pad Driver ( xxxxxx-- ) Scr Panssm 4X ( xxxxxx-- ) Washer, Flat, #8, Ss 084 ( xxxxxx-- ) Washer, Flat, 0. Ss 4 ( xxxxxx-- ) Screw, Pan, M X.0 X, Ss 48-- ( ) Pad, Strip D Brown 48-- ( ) Pad, Scrub D Blue 48-- ( ) Pad, Buff D Red ( ) Pad, Polish D White 009 ( ) Pad, Strip--Hd D Black 00XP MM40 ( -0) -

14 STANDARD PARTS Fig. 4 - Brushes, Replacement, Model 900, 900 mm ( in) XP MM40 ( -0)

15 STANDARD PARTS Fig. 4 - Brushes, Replacement, Model 900, 900 mm ( in) 00 - in, NA, CE 0 ( ) Brush--Scr Grout Lg 8Sr Poly 404 ( ) Brush--Scrub Lg 8Sr Poly ( ) Brush--Scrub Lg 8Sr Nylon ( ) Brush--Scrub Lg 8Sr Ab o ( ) Brush--Disk Scr 8 D Assy Nylon 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o ( ) Brush--Disk Scr--8 D--Assy--Poly 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o ( ) Brush--Disk Scr--8 D Assy Ab 488 ( ) Spring, Brush Retaining ( ) Bracket, Spring Retainer 084 ( ) Washer, Flat, 0. Ss 4 ( ) Screw, Pan, M X.0 X, Ss o ( xxxxxx ) Driver, Pad 8 D Assy (Replaced by 008) ( xxxxxx ) Bracket, Spring Retainer ( xxxxxx ) Spring, Brush Retaining 0 9 ( xxxxxx ) Adaptor, Brush 8 ( xxxxxx ) Spacer, Pad Holder 98 ( xxxxxx ) Holder, Pad o 008 ( xxxxxx-- ) Driver, Pad 8 D Assy ( xxxxxx-- ) Back, Pad Drive W/Face 8 Dia. 9 ( xxxxxx-- ) Adaptor, Brush 488 ( xxxxxx-- ) Spring, Brush Retaining 499 ( xxxxxx-- ) Bracket, Spring Retainer ( xxxxxx-- ) Centering Device, F/Pad Driver ( xxxxxx-- ) Scr Panssm 4X ( xxxxxx-- ) Washer, Flat, #8, Ss 084 ( xxxxxx-- ) Washer, Flat, 0. Ss 4 ( xxxxxx-- ) Screw, Pan, M X.0 X, Ss ( ) Pad, Strip 8D Brown 009 ( ) Pad, Strip--Hd 8D Black 8 ( ) Pad, Scrub 8D Blue 80 ( ) Pad, Buff 8D Red 8 ( ) Pad, Polish 8D White 00XP MM40 ( -0) -9

16 STANDARD PARTS Fig. - Main Frame and Drive Group , XP MM40 (9-0)

17 STANDARD PARTS Fig. - Main Frame and Drive Group XP, NA 98 ( ) Frame, Main o 90AM (08-- ) Transaxle Assy, W/O Parking Brake (See Breakdowns) 4AM ( xxxxxx-- ) Motor, Ele, Vdc 0.0Hp 000Rpm (See Breakdowns) ( ) Scr Hexssm 8X. 0 ( ) Isolator, Transaxle 0 ( ) Bracket, Mtg, Isolator 098 ( ) Bracket, Support, Frame 8 09 ( ) Bracket, Mtg, Transaxle 9 44 ( ) Isolator--Vibration,Lb.Ratng 0 08 ( ) Bracket, Caster Pad 0484 ( ) Bearing, Flange. Bore 4 ( ) Caster,.0 Dia Wheel 49AM ( ) Spring, Centering 4 8 ( ) Bumper, Rubber 040 ( ) Clip, Keeper, St 04 ( ) Washer, Flat, 0.40b.d., Ss 84 ( ) Chain,Static, Brass 8 ( ) Scr--Hexssm 8X. 0 Nylnloc ( ) Washer, Flat, 0.8b 0.88d.08, Ss ( ) Scr Hexssm 8X ( ) Nut--Hxlocnyln M 8X. Reg Ss ( ) Scr Hexssm 8X ( ) Scr Hexssm 8X ( ) Scr Hexssm 8X. Nylonloc 800 ( ) Bracket, Support 48 ( ) Washer, Bellville. Pltd 8 ( ) Scr--Hexssm 8X. Nylonloc (0--04 ) Chain, Coil, Str, #0, 09.0L 0 Link (0--04 ) Scr Hexssm 8X (0--04 ) Washer, Flat, 0.8b 0.88d.08, Ss 08 (0--04 ) Nut--Hxlocnyln M 8X. Reg Ss o 0AM ( ) Transaxle Assy, W/Parking Brake (See Breakdowns) ( ) Motor,Elec 0.HpV.Dc,000Rpm (See Breakdowns) 4 08 ( ) Washer, Flat, 0.b.00d., Ss 8 (08--xxxxxx ) Motor, Ele, Vdc 0.0Hp 900Rpm (Replaced by 4AM) (See Brealdowns) 044 (0-- ) Bracket, Mtg, Strap [Static Ground] 0 (0-- ) Screw, Hex, M8 X. X 4, Ss 8 08 (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 9 08 (0-- ) Nut, Hex, Lock, M8 X., Nl, Ss (0-- ) Strap, Static, 08.0l [Afmkt] (0-- ) Screw, Hex, M8 X. X 0, Ss 00XP MM40 (9-0) -

18 STANDARD PARTS Fig. - Tire and Rim Assembly, Black 4-00XP MM40 ( -98)

19 STANDARD PARTS Fig. - Tire and Rim Assembly, Black NA o 8 ( ) Tire and Rim Assembly, Black 4049 ( ) Tire, 4.0/.--, Black 048 ( ) Tube, Inner 04 ( ) Rim 4 09 ( ) Nut, Wheel 00XP MM40 (9-99) -

20 STANDARD PARTS Fig. - Scrub Head Lift Group XP MM40 ( -00)

21 STANDARD PARTS Fig. - Scrub Head Lift Group XP, NA, JP 0 ( ) Arm, Lift, Head 099 ( ) Spacer, Lift Arm 08 ( ) Sleeve,.44B.D. Bronze ( ) Bracket, Tank Support 0 ( ) Pin, Clevis, 0. Dia X.00Lg 094 ( ) Pin,Hair Cotter.Wire.Sl 04 ( ) Bracket, Guide, Roller 8 04 ( ) Bracket, Roller Guide 9 04 ( ) Scr Hexssm 8X ( ) Washer, Flat, 0.8b 0.88d.08, Ss 9 0 ( ) Bracket, Mounting, Actuator 9 ( ) Actuator, Electronic 98 ( ) Pin,Clevis,0. Dia.X.0 Lg 4 88 ( ) Pin, Hair Cotter.D.0Wir 4 ( ) Pin,Clevis,0.0 Dia.X.00 Lg 040 ( ) Clip, Keeper, Open 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss ( ) Scr--Hexssm 8X ( ) Scr--Hexssm 8X. Nylon Loc 00XP MM40 ( -0) -

22 STANDARD PARTS Fig. 8 - Scrub Head Kit, Model 00D, 00 mm (8 in) XP MM40 (9-0)

23 STANDARD PARTS Fig. 8 - Scrub Head Kit, Model 00D, 00 mm (8 in) , XP, 8in, NA, JP o 0 ( ) Scrub Head Kit 00D 00 ( ) Cover, Scrub Head 8 Disk ( ) Hose, Vinyl.8Id.Od 8.0L ( ) Fitting--Plastic Tee 0Bm/0Bm/ ( ) Gasket, End Bell 440AM (000-- ) Motor, Ele, vdc 0.0hp 00rpm.0a (See Breakdowns) 8 ( ) Harness, Wire, Disk Head, Elec 449 ( ) Tie, Cable 4.00 Max 4.0Lg ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L 08 (0-- ) Screw, Hex,.8-- X.0, G 4 88 ( ) Bracket, Pivot 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 4 ( ) Hub, Drive, Brush, Disk, 0.b t 9 40 ( ) Skirt Assy, Disk Head, ( ) Wheel,.0 Dia 49 ( ) Sleeve 404 ( ) Door, Scrub Head, Lh 40 ( ) Door, Scrub Head, Rh ( ) Nut, Retainer R/. Dia 99 ( ) Cover, Front, Trim, [00 Disk] 48 ( ) Washer--Belleville. Pltd 0 0 ( ) Roller, Linkage, Head 8 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg ( ) Pin,Hair Cotter.Wire.Sl ( xxxxxx-- ) Key, Square Lg 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 00 ( ) Scr--Hexssm0X. 40 Full Thd 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 08 ( ) Washer Flt.8 Ss 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss ( ) Washer,.40B.8D.09Ureth 94 ( ) Scr--Flt M8 X ( ) Clip, Keeper, St ( xxxxxx-- ) Scr Hexss M8 X ( xxxxxx-- ) Scr Hexss M X ( ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss ( ) Washer, Flat, 0. Std (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss (0-- ) Washer, Flt.0 SAE 00XP MM40 (9-0) -

24 STANDARD PARTS Fig. 8 - Scrub Head Kit, Model 00D, 00 mm (8 in) 4 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin ( xxxxxx ) Scr Hexss.--0X ( xxxxxx ) Scr Hexss.--8X ( xxxxxx ) Motor Assy, Elec, (Replaced by 400) (See Breakdowns) 80 ( xxxxxx ) Motor Assy, Elec, (Replaced by 440) (See Breakdowns) ( ) Bolt Kit, Shld, F/ 490, Replmt 08 ( ) Sleeve,.00B.D. Stl 4 48 ( ) Washer, Flt.0 SAE XP MM40 (9-0)

25 0 Fig. 9 - Scrub Head Kit, Model 800D, 800 mm ( in) STANDARD PARTS XP MM40 (9-0) -9

26 STANDARD PARTS Fig. 9 - Scrub Head Kit, Model 800D, 800 mm ( in) , XP, in, NA, JP o 0 ( ) Scrub Head Kit 800D 00 ( ) Cover, Scrub Head Disk ( ) Hose, Vinyl.8Id.Od 8.0L ( ) Fitting--Plastic Tee 0Bm/0Bm/ ( ) Gasket, End Bell 440AM (000-- ) Motor, Ele, vdc 0.0hp 00rpm.0a (See Breakdowns) 8 ( ) Harness, Wire, Disk Head, Elec 449 ( ) Tie, Cable 4.00 Max 4.0Lg ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L 08 (0-- ) Screw, Hex,.8-- X.0, G 4 88 ( ) Bracket, Pivot 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 4 ( ) Hub, Drive, Brush, Disk, 0.b t 9 4 ( ) Skirt Assy, Disk Head, 0 40 ( ) Wheel,.0 Dia 49 ( ) Sleeve 404 ( ) Door, Scrub Head, Lh 40 ( ) Door, Scrub Head, Rh ( ) Nut, Retainer R/. Dia 99 ( ) Cover, Front, Trim, [00 Disk] 48 ( ) Washer--Belleville. Pltd 0 0 ( ) Roller, Linkage, Head 8 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg ( ) Pin,Hair Cotter.Wire.Sl ( xxxxxx-- ) Key, Square Lg 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 00 ( ) Scr--Hexssm0X. 40 Full Thd 094 (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 08 ( ) Washer Flt.8 Ss 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss ( ) Washer,.40B.8D.09Ureth 94 ( ) Scr--Flt M8 X ( ) Clip, Keeper, St ( xxxxxx-- ) Scr Hexss M8 X ( xxxxxx-- ) Scr Hexss M X ( ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss ( ) Washer, Flat, 0. Std (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss (0-- ) Washer, Flt.0 SAE -0 00XP MM40 (9-0)

27 Fig. 9 - Scrub Head Kit, Model 800D, 800 mm ( in) STANDARD PARTS 4 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin ( xxxxxx ) Scr Hexss.--0X ( xxxxxx ) Scr Hexss.--8X ( xxxxxx ) Motor Assy, Elec, (Replaced by 400) (See Breakdowns) 80 ( xxxxxx ) Motor Assy, Elec, (Replaced by 440) (See Breakdowns) ( ) Bolt Kit, Shld, F/ 490, Replmt 08 ( ) Sleeve,.00B.D. Stl 4 48 ( ) Washer, Flt.0 SAE 4 00XP MM40 (9-0) -

28 STANDARD PARTS Fig. 0 - Scrub Head Kit, Model 900D, 900 mm ( in) XP MM40 (9-0)

29 STANDARD PARTS Fig. 0 - Scrub Head Kit, Model 900D, 900 mm ( in) , XP, in, NA, JP o 04 ( ) Scrub Head Kit 900D 00 ( ) Cover, Scrub Head Disk ( ) Hose, Vinyl.8Id.Od 8.0L ( ) Fitting--Plastic Tee 0Bm/0Bm/ 4 AM ( ) Motor, Gear,.0Hp V (See Breakdowns) 0 ( ) Plate, Adaptor, Motor 8 ( ) Harness, Wire, Disk Head, Elec 449 ( ) Tie, Cable 4.00 Max 4.0Lg 8 49 ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L 08 (0-- ) Screw, Hex,.8-- X.0, G 4 88 ( ) Bracket, Pivot 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 4 ( ) Hub, Drive, Brush, Disk, 0.b t 9 4 ( ) Skirt, Assy, Disk Head 0 40 ( ) Wheel,.0 Dia 49 ( ) Sleeve 404 ( ) Door, Scrub Head, Lh 40 ( ) Door, Scrub Head, Rh ( ) Nut, Retainer R/. Dia 99 ( ) Cover, Front, Trim, [00 Disk] 8 (094-- ) Breaker, Circuit, Amp 0 ( ) Ring, Spacer 8 48 ( ) Washer--Belleville. Pltd 9 0 ( ) Roller, Linkage, Head 0 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg 094 ( ) Pin,Hair Cotter.Wire.Sl 090 ( ) Scr Hexssm 8X ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss 0 00 ( ) Scr--Hexssm0X. 40 Full Thd 099 ( ) Scr--Hex.--8X.0 Ss 08 ( ) Washer Flt.8 Ss 8 ( ) Washer,.40B.8D.09Ureth 9 94 ( ) Scr--Flt M8 X ( ) Clip, Keeper, St (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 9 ( ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss ( ) Washer, Flat, 0. Std ( ) Screw, Flt,.8-- X 0., Al 8 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss (0-- ) Washer, Flt.0 SAE ( ) Breaker, Circuit, Amp ( ) Bolt Kit, Shld, F/ 490, Replmt 08 ( ) Sleeve,.00B.D. Stl 48 ( ) Washer, Flt.0 SAE 4 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin 00XP MM40 (9-0) -

30 STANDARD PARTS Fig. - Scrub Head Kit, Model 800D Heavy Duty, 800 mm ( in) XP MM40 (9-0)

31 STANDARD PARTS , XP, HDin, NA, JP Fig. - Scrub Head Kit, Model 800D Heavy Duty, 800 mm ( in) o 0 ( ) Scrub Head Kit Hd 800D00 ( ) Cover, Scrub Head Disk ( ) Hose, Vinyl.8Id.Od 8.0L ( ) Fitting--Plastic Tee 0Bm/0Bm/ 4 AM ( ) Motor, Gear,.0Hp V (See Breakdowns) 0 ( ) Plate, Adaptor, Motor 8 ( ) Harness, Wire, Disk Head, Elec 449 ( ) Tie, Cable 4.00 Max 4.0Lg 8 49 ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L 08 (0-- ) Screw, Hex,.8-- X.0, G 4 88 ( ) Bracket, Pivot 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 4 ( ) Hub, Drive, Brush, Disk, 0.b t 9 4 ( ) Skirt Assy, Disk Head, 0 40 ( ) Wheel,.0 Dia 49 ( ) Sleeve 404 ( ) Door, Scrub Head, Lh 40 ( ) Door, Scrub Head, Rh ( ) Nut, Retainer R/. Dia 99 ( ) Cover, Front, Trim, [00 Disk] 8 (094-- ) Breaker, Circuit, Amp 0 ( ) Ring, Spacer 8 48 ( ) Washer--Belleville. Pltd 9 0 ( ) Roller, Linkage, Head 0 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg 094 ( ) Pin,Hair Cotter.Wire.Sl 090 ( ) Scr Hexssm 8X ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss 0 00 ( ) Scr--Hexssm0X. 40 Full Thd 099 ( ) Scr--Hex.--8X.0 Ss 08 ( ) Washer Flt.8 Ss 8 ( ) Washer,.40B.8D.09Ureth 9 94 ( ) Scr--Flt M8 X ( ) Clip, Keeper, St (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss 4 9 ( ) Nut, Hex, Std, M0 X. 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss ( ) Washer, Flat, 0. Std ( ) Screw, Flt,.8-- X 0., Al 8 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss (0-- ) Washer, Flt.0 SAE ( ) Breaker, Circuit, Amp ( ) Bolt Kit, Shld, F/ 490, Replmt 08 ( ) Sleeve,.00B.D. Stl 48 ( ) Washer, Flt.0 SAE 4 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin 00XP MM40 (9-0) -

32 STANDARD PARTS Fig. - Scrub Head Drive Group, Model 00C, 00 mm (8 in) XP MM40 ( -0)

33 STANDARD PARTS , XP, 8in, NA, JP Fig. - Scrub Head Drive Group, Model 00C, 00 mm (8 in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig., and Fig.. ( ) Motor,. Hp, V, 00Rpm (See Breakdowns) AM (088-- ) Motor Assy, Ele, V, 0.Hp, 00Rpm (See Breakdowns) ( ) Bracket, Mounting, Motor 4 ( ) Bracket, Mounting, Motor 9 ( ) Sprocket, Drive 4 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss 4 0 ( ) Belt, Replmt, Brush Drive, F/0 4 ( ) Guard, Belt, Rh ( ) Guard, Belt, Lh o ( ) Plug Drive Assy 8 ( ) Shaft, Drive Plug 9 ( ) Plug, Drive, Brush, [48 Tooth -- Gt/] 0 40AM ( ) Bearing--Ball,0.9B.D 0.W 0 ( ) Ring,Retain,Ex,0.9Od,Basic o 408 ( ) Door Assy, Brush 940 ( ) Door, Brush o ( ) Plug Idler Assy ( ) Shaft, Idler Plug 4 84 ( ) Pin, Roll 90 ( ) Plug, Brush 0 ( ) Ring,Retain,Ex,0.9Od,Basic 80 ( ) Skirt, Scrub Head 8 08 ( ) Nut--Hxlocnylon M 8X. Reg Ss 9 8 ( ) Bar, Support 0 40 ( ) Scr--Flt M8 X. Ss 9099 ( ) Scr--Flt M0 X. 0, Ss Nl 080 ( ) Scr Flt M8 x ( ) Tie, Cable 4.00D Max 4.0 Lg ( ) Washer Flt. Ss 4 40 ( ) Screw, Flat,M 8X. Ss 0940 ( ) Scr Hexssm 8X. 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09 ( ) Spring, Door 9 9 ( ) Shield, Belt 0 88 ( ) Scr--Set 8-- X. Nylon Loc 4 80 ( ) Bracket, Shield ( ) Skirt, Deflector 8 ( ) Skirt, Deflector 4 ( ) Bracket, Shield 9 ( ) Gasket, Shield ( ) Shield, Belt 8 ( ) Screw, Hex, M0 X.0 X, Ss ( ) Guard, Belt, Rh 9 ( ) Guard, Belt, Lh ( ) Scr--Hxfmg M8 X ( ) Skirt, Scrub Head 4 8 ( ) Bar, Support 4 8 ( ) Replm Kit, Seal ( ) Seal, Ring ( ) Screw, Hex, M0--.0 X ( ) Tool, Removal, Shaft, F/ 00XP MM40 (9-0) -

34 STANDARD PARTS Fig. - Scrub Head Frame Group, Model 00C, 00 mm (8 in) XP MM40 (9-0)

35 STANDARD PARTS 00-00, XP, 8in, NA, JP Fig. - Scrub Head Frame Group, Model 00C, 00 mm (8 in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig., and Fig ( ) Housing, Cyl, Replacement 8 04 ( ) Housing, Cyl, Mach, 00mm 8 ( ) Harness, Wire, Cyl Head, Elec 49 ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring 08 ( ) Sleeve,.00B.D. Stl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L ( ) Bolt Kit, Shld, F/ 490, Replmt 9 88 ( ) Bracket, Pivot 0 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 ( ) Roller, Bumper 4 9 ( ) Bracket, Mounting, Roller 9 ( ) Pin, Roller 084 ( ) Pin, Cotter.X0. o 84 ( ) Debris Tray Kit, 8 in ( ) Tray, Debris, ( ) Lip, Debris Tray, ( ) Skirt, Debris Tray 0 0 ( ) Strip, Debris Tray 0900 ( ) Scr--HexssmX ( ) Washer Flt. Ss 44 ( ) Scr--Hxfmg M X ( ) Nut, Hex, Lock, M X.0, Nl 4 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg 094 ( ) Pin,Hair Cotter.Wire.Sl 00 ( ) Scr--Hexssm0X. 40 Full Thd 8 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 9 48 ( ) Washer, Flt.0 SAE ( ) Channel 994 ( ) Cover, Front, Trim, [00 Cyl] ( ) Fitting--Plastic Tee 0Bm/0Bm/ ( ) Bracket, Hose Guide ( ) Screw, Hex, M08 X. X, Ss 08 ( ) Nut, Hex, Lock, M08 X., Nl, Ss 4 ( xxxxxx-- ) Roller, Rwk 4 ( xxxxxx-- ) Washer, 0.b.d., Stl, Pl 8 9 ( xxxxxx-- ) Spring, Cmpr, 0.8od.08wir.0l 9 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 ( ) Nut, Hex, Std, M0 X ( ) Screw, Hex, M8 X. X, Fmg 4 0 ( xxxxxx ) Roller, Linkage, Head (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss (0-- ) Screw, Hex,.8-- X.0, G 0 48 (0-- ) Washer, Flt.0 SAE 00XP MM40 (9-0) -9

36 STANDARD PARTS Fig. 4 - Scrub Head Drive Group, Model 800C, 800 mm ( in) XP MM40 ( -0)

37 STANDARD PARTS , EE, XP, in, NA, JP Fig. 4 - Scrub Head Drive Group, Model 800C, 800 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig. 4, and Fig.. ( ) Motor,. Hp, V, 00Rpm (See Breakdowns) AM (088-- ) Motor Assy, Ele, V, 0.Hp, 00Rpm (See Breakdowns) ( ) Bracket, Mounting, Motor 4 ( ) Bracket, Mounting, Motor 9 ( ) Sprocket, Drive 4 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss 4 0 ( ) Belt, Replmt, Brush Drive, F/0 4 ( ) Guard, Belt, Rh ( ) Guard, Belt, Lh o ( ) Plug Drive Assy 8 ( ) Shaft, Drive Plug 9 ( ) Plug, Drive, Brush, [48 Tooth -- Gt/] 0 40AM ( ) Bearing--Ball,0.9B.D 0.W 0 ( ) Ring,Retain,Ex,0.9Od,Basic o 408 ( ) Door Assy, Brush 940 ( ) Door, Brush o ( ) Plug Idler Assy ( ) Shaft, Idler Plug 4 84 ( ) Pin, Roll 90 ( ) Plug, Brush 0 ( ) Ring,Retain,Ex,0.9Od,Basic 80 ( ) Skirt, Scrub Head 8 08 ( ) Nut--Hxlocnylon M 8X. Reg Ss 9 8 ( ) Bar, Support 0 40 ( ) Scr--Flt M8 X. Ss 9099 ( ) Scr--Flt M0 X. 0, Ss Nl 080 ( ) Scr Flt M8 x ( ) Tie, Cable 4.00D Max 4.0 Lg ( ) Washer Flt. Ss 4 40 ( ) Screw, Flat,M 8X. Ss 0940 ( ) Scr Hexssm 8X. 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09 ( ) Spring, Door 9 9 ( ) Shield, Belt 0 88 ( ) Scr--Set 8-- X. Nylon Loc 4 80 ( ) Bracket, Shield ( ) Skirt, Deflector 8 ( ) Skirt, Deflector 4 ( ) Bracket, Shield 9 ( ) Gasket, Shield ( ) Shield, Belt 8 ( ) Screw, Hex, M0 X.0 X, Ss ( ) Guard, Belt, Rh 9 ( ) Guard, Belt, Lh ( ) Scr--Hxfmg M8 X ( ) Skirt, Scrub Head 4 8 ( ) Bar, Support 4 8 ( ) Replm Kit, Seal ( ) Seal, Ring ( ) Screw, Hex, M0--.0 X ( ) Tool, Removal, Shaft, F/ 00XP MM40 (9-0) -

38 STANDARD PARTS Fig. - Scrub Head Frame Group, Model 800C, 800 mm ( in) XP MM40 (9-0)

39 STANDARD PARTS 00-00, EE, XP, in, NA, JP Fig. - Scrub Head Frame Group, Model 800C, 800 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig. 4, and Fig ( ) Housing, Cyl, Replacement 0 ( ) Housing, Cyl, Mach, 800mm 8 ( ) Harness, Wire, Cyl Head, Elec 49 ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring 08 ( ) Sleeve,.00B.D. Stl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L ( ) Bolt Kit, Shld, F/ 490, Replmt 9 88 ( ) Bracket, Pivot 0 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 ( ) Roller, Bumper 4 9 ( ) Bracket, Mounting, Roller 9 ( ) Pin, Roller 084 ( ) Pin, Cotter.X0. o 8 ( ) Debris Tray Kit, in 90 ( ) Tray, Debris, 8 04 ( ) Lip, Debris Tray 9 9 ( ) Skirt, Debris Tray 0 0 ( ) Strip, Debris Tray 0900 ( ) Scr--HexssmX ( ) Washer Flt. Ss 44 ( ) Scr--Hxfmg M X ( ) Nut, Hex, Lock, M X.0, Nl 4 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg 094 ( ) Pin,Hair Cotter.Wire.Sl 00 ( ) Scr--Hexssm0X. 40 Full Thd 8 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 9 48 ( ) Washer, Flt.0 SAE ( ) Channel 994 ( ) Cover, Front, Trim, [00 Cyl] ( ) Fitting--Plastic Tee 0Bm/0Bm/ ( ) Bracket, Hose Guide ( ) Screw, Hex, M08 X. X, Ss 08 ( ) Nut, Hex, Lock, M08 X., Nl, Ss 4 ( xxxxxx-- ) Roller, Rwk 4 ( xxxxxx-- ) Washer, 0.b.d., Stl, Pl 8 9 ( xxxxxx-- ) Spring, Cmpr, 0.8od.08wir.0l 9 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 ( ) Nut, Hex, Std, M0 X ( ) Screw, Hex, M8 X. X, Fmg 4 0 ( xxxxxx ) Roller, Linkage, Head (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss (0-- ) Screw, Hex,.8-- X.0, G 0 48 (0-- ) Washer, Flt.0 SAE 00XP MM40 (9-0) -

40 STANDARD PARTS Fig. - Scrub Head Drive Group, Model 900C, 900 mm ( in) XP MM40 ( -0)

41 STANDARD PARTS 8-00, XP, in, NA, JP Fig. - Scrub Head Drive Group, Model 900C, 900 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig., and Fig.. ( ) Motor,. Hp, V, 00Rpm (See Breakdowns) AM (088-- ) Motor Assy, Ele, V, 0.Hp, 00Rpm (See Breakdowns) ( ) Bracket, Mounting, Motor 4 ( ) Bracket, Mounting, Motor 9 ( ) Sprocket, Drive 4 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss 4 0 ( ) Belt, Replmt, Brush Drive, F/0 4 ( ) Guard, Belt, Rh ( ) Guard, Belt, Lh o ( ) Plug Drive Assy 8 ( ) Shaft, Drive Plug 9 ( ) Plug, Drive, Brush, [48 Tooth -- Gt/] 0 40AM ( ) Bearing--Ball,0.9B.D 0.W 0 ( ) Ring,Retain,Ex,0.9Od,Basic o 408 ( ) Door Assy, Brush 940 ( ) Door, Brush o ( ) Plug Idler Assy ( ) Shaft, Idler Plug 4 84 ( ) Pin, Roll 90 ( ) Plug, Brush 0 ( ) Ring,Retain,Ex,0.9Od,Basic 80 ( ) Skirt, Scrub Head 8 08 ( ) Nut--Hxlocnylon M 8X. Reg Ss 9 8 ( ) Bar, Support 0 40 ( ) Scr--Flt M8 X. Ss 9099 ( ) Scr--Flt M0 X. 0, Ss Nl 080 ( ) Scr Flt M8 x ( ) Tie, Cable 4.00D Max 4.0 Lg ( ) Washer Flt. Ss 4 40 ( ) Screw, Flat,M 8X. Ss 0940 ( ) Scr Hexssm 8X. 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 8 09 ( ) Spring, Door 9 9 ( ) Shield, Belt 0 88 ( ) Scr--Set 8-- X. Nylon Loc 4 80 ( ) Bracket, Shield ( ) Skirt, Deflector 8 (009-- ) Skirt, Deflector 4 (009-- ) Bracket, Shield 9 (009-- ) Gasket, Shield (009-- ) Shield, Belt 8 (009-- ) Screw, Hex, M0 X.0 X, Ss (009-- ) Guard, Belt, Rh 9 (009-- ) Guard, Belt, Lh ( ) Scr--Hxfmg M8 X ( ) Skirt, Scrub Head 4 8 ( ) Bar, Support 4 8 ( ) Replm Kit, Seal ( ) Seal, Ring ( ) Screw, Hex, M0--.0 X ( ) Tool, Removal, Shaft, F/ 00XP MM40 (9-0) -

42 STANDARD PARTS Fig. - Scrub Head Frame Group, Model 900C, 900 mm ( in) XP MM40 (9-0)

43 STANDARD PARTS 8-00, XP, in, NA, JP Fig. - Scrub Head Frame Group, Model 900C, 900 mm ( in) NOTE: Scrub Head Kit, Tennant Part Number 0, includes Fig., and Fig.. 40 ( ) Housing, Cyl, Replacement 0 (009-- ) Housing, Cyl, Mach, 900mm 8 ( ) Harness, Wire, Cyl Head, Elec 49 ( ) Tie Cable.00D Max.4Lg ( ) Bracket, Mtg, Spring 08 ( ) Sleeve,.00B.D. Stl 8 ( ) Spring,Comp,.84Odx.0Wire.0L 4 ( ) Sprng,Comp,0.4Idx.Wire.L ( ) Bolt Kit, Shld, F/ 490, Replmt 9 88 ( ) Bracket, Pivot 0 0 ( ) Pin, Clevis, 0.Dia X4.Lg 084 ( ) Pin, Cotter.X0. ( ) Spring, Tension 8 ( ) Roller, Bumper 4 9 ( ) Bracket, Mounting, Roller 9 ( ) Pin, Roller 084 ( ) Pin, Cotter.X0. o 8 ( ) Debris Tray Kit, in 400 ( ) Tray, Debris, 8 0 ( ) Lip, Debris Tray, 9 9 ( ) Skirt, Debris Tray 0 0 ( ) Strip, Debris Tray 0900 ( ) Scr--HexssmX ( ) Washer Flt. Ss 44 ( ) Scr--Hxfmg M X ( ) Nut, Hex, Lock, M X.0, Nl 4 9 ( ) Pin, Clevis 0.0 Dia X 4.Lg 094 ( ) Pin,Hair Cotter.Wire.Sl 00 ( ) Scr--Hexssm0X. 40 Full Thd 8 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 9 48 ( ) Washer, Flt.0 SAE ( ) Channel 994 ( ) Cover, Front, Trim, [00 Cyl] ( ) Fitting--Plastic Tee 0Bm/0Bm/ ( ) Bracket, Hose Guide ( ) Screw, Hex, M08 X. X, Ss 08 ( ) Nut, Hex, Lock, M08 X., Nl, Ss 4 ( xxxxxx-- ) Roller, Rwk 4 ( xxxxxx-- ) Washer, 0.b.d., Stl, Pl 8 9 ( xxxxxx-- ) Spring, Cmpr, 0.8od.08wir.0l 9 4 ( ) Nut, Hex, Lock,.8--, Nl, Thin ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 ( ) Nut, Hex, Std, M0 X ( ) Screw, Hex, M8 X. X, Fmg 4 0 ( xxxxxx ) Roller, Linkage, Head (0-- ) Tube, Rnd, 0.40id 0.0od 04.l, Ss (0-- ) Sleeve, P/M, 0.0b 0.d.4l, Stl Pl 4 (0-- ) Washer, Flat, 0.8b.d.0, Ss 4 9 (0-- ) Nut, Hex, Lock,.8--, Nl, Ss (0-- ) Washer, Flat, 0.8b 0.88d.08, Ss (0-- ) Screw, Hex,.8-- X.0, G 0 48 (0-- ) Washer, Flt.0 SAE 00XP MM40 (9-0) -

44 STANDARD PARTS Fig. 8 - Recovery Tank Group ( ) XP MM40 ( -04)

45 STANDARD PARTS Fig. 8 - Recovery Tank Group ( ) 00-00, EE, XP, NA ( ) Tank, Recovery ( ) Ftg--Plug Npt Pm Rd Hd Plstc. ( ) Hose, Inlet Recovery Tank 4 9 ( ) Clip, Hose, Hanger 409 ( ) Hose & Cuff Assy, Drain.Id.L 0 ( ) Washer,.0B.00D. Rbr ( ) Washer-- Flt X0X Ss M 8 94 ( ) Hose, Drain, Flex 9 ( ) Tube, Drain ( ) Scr--Hexssm 8X ( ) Hose, Drain, Tank, Solution 99 ( ) Clamp--Wormdrive, D ( ) Strap, Cap Retainer 4 4 ( ) Plug, Expandable.00 Dia 9 ( ) Clip, Hose, Hanger 44 ( ) Clamp--Wormdrive,.8--.D 8 ( ) Strap, Drainhose ( ) Plug, Expandable.D X.L ( ) Hose & Cuff Assy, Vacuum.D L 0 8 ( ) Sensor Kit, Liq Level 9-- ( ) Ftg,Plstc,Cplg,Barb.Pt--.0Hs ( ) Cable Assy, Hose Retainer 49 ( ) Tie, Cable.00D Max.4Lg 4 94 ( ) Clamp, Cable,.00D 0.W Stl 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 8 ( ) Scr Hexssm 8X. 08 ( ) Nut--Hxlocnyln M 8X. Reg Ss 8 04 ( ) Stud, M8X Pltd ( ) Knob, M8X. Insert ( ) Switch, Float 0 ( ) Filter, Vac Fan 00 ( ) Washer, Flat,. Fender 4 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 4 ( ) Sleeve, P/M, 0.49d 0.8b 0.l 40ss 4 ( ) Screw, Hex, M 8 X. X 0, Ss, Nl 4 00XP MM40 (9-0) -9

46 STANDARD PARTS Fig. 9 - Recovery Tank Group (009 - ) XP MM40 ( -0)

47 STANDARD PARTS Fig. 9 - Recovery Tank Group (009 - ) 00 - NA, CE o (009-- ) Tank, Recovery 49 (009-- ) Fitting, Plstc, Pf/Pf, Bh (009-- ) Hose, Inlet Recovery Tank o 4 08 (009-- ) Hose, Assembly, Drain,. o 0089 (009-- ) Cap, Drain Assembly 09 (009-- ) Strap, Drain Cap 008 (009-- ) O Ring,.48 Id,. Od 8 94 (009-- ) Hose, Drain, Flex 9 (009-- ) Tube, Drain (009-- ) Scr--Hexssm 8X. 0 (009-- ) Screw, Hex, M 8 X. X 0, Ss, Nl 4 99 (009-- ) Clamp--Wormdrive, D (009-- ) Sleeve, P/M, 0.49d 0.8b 0.l 40ss (009-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 (009-- ) Clip, Hose, Hanger 9 (009-- ) Clamp--Wormdrive,.--.0d,.0w 00 (009-- ) Washer, Flat,. Fender (009-- ) Filter, Vac Fan (009-- ) Hose & Cuff Assy, Vacuum.D L 0 8 (009-- ) Switch, Float 9-- (009-- ) Ftg,Plstc,Cplg,Barb.Pt--.0Hs (009-- ) Cable Assy, Hose Retainer 49 (009-- ) Tie, Cable.00D Max.4Lg 4 94 (009-- ) Clamp, Cable,.00D 0.W Stl 08 (009-- ) Washer, Flat, 0.8b 0.88d.08, Ss 4 (009-- ) Scr Hexssm 8X. 08 (009-- ) Nut--Hxlocnyln M 8X. Reg Ss 8 (009-- ) Clamp, Hose, Wormdrive, d o 9 0 (009-- ) Hose, Assembly, Drain,. o (009-- ) Cap, Drain Assembly 09 (009-- ) Strap, Drain Cap 008 (009-- ) O Ring,.48 Id,. Od (009-- ) Ftg--Plug Npt Pm Rd Hd Plstc. 00XP MM40 (9-0) -4

48 STANDARD PARTS Fig. 0 - Solution Tank Group XP MM40 ( -0)

49 STANDARD PARTS Fig. 0 - Solution Tank Group 00-00, XP, NA 90 ( ) Bracket, Prop Arm ( ) Sleeve,.8B.49D. Ss 00 ( ) Washer--Flt. Fender Pltd 4 ( ) Tank, Solution, w/label ( ) Ftg--Plug Npt Pm Rd Hd Plstc. ( ) Cover, Solution Tank, w/label 0 ( ) Gasket, Tank, Front 8 ( ) Gasket, Tank, Rear 9 40 ( ) Stop, Tank 0 40 ( ) Sleeve 4 ( ) Spring, Torsion 9 ( ) Hinge Leaf ( ) Hinge Wldt, Leaf 4 4 ( ) Scr--Flt M 8X. 0 Blk Nyloc 90 ( ) Plug, Solution Tank 89 ( ) Hinge Leaf, Wldt, Rear 08 ( ) Washer, Flat, 0.8b 0.88d.08, Ss ( ) Scr--Hexssm 8X ( ) Scr--Hexssm 8X. Nylnloc ( ) Hinge Wldt, Leaf 00XP MM40 ( -0) -4

50 STANDARD PARTS Fig. - Vacuum Fan Group XP MM40 ( -0)

51 STANDARD PARTS Fig. - Vacuum Fan Group , XP, NA o ( ) Fan, Vac (See Breakdowns) 4 ( ) Seal, Vac Fan ( ) Bracket, Mounting, Vac Fan 4 04 ( ) Filter, Vac Fan 00, Field Kit 408 ( ) Clamp--Cable, 0.44D 0.W 49 ( ) Tie, Cable.D Max.0Lg 0940 ( ) Scr--Hexssm 8X ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 9 ( ) Scr Hexssm 8X. o ( ) Fan Assy, Vacuum (See Breakdowns) 4 ( ) Seal, Vac Fan 00XP MM40 ( -0) -4

52 STANDARD PARTS Fig. - Solution Control Group XP MM40 (9-0)

53 STANDARD PARTS Fig. - Solution Control Group 00-00, EE, XP, NA, JP 8 ( ) Lever, Control 90 ( ) Grip, Handle 8 ( ) Housing, Control Lever 4 44 ( ) Swivel 444 ( ) Washer,.44B.9D.0Nylon 4 ( ) Scr--Flt M 8X. 0 Blk Nyloc 4 ( ) Washer, Finish M8 Blk 8 88 ( ) Cable Assy, Water 9 4 ( ) Kit, Ci, Sol Valve [00] 0 98 ( ) Bracket, Mtg, Valve 4 ( ) Valve, Solenoid 80 ( ) Clamp, Hose, Wormdrive, d,.w 4 ( ) Clamp--Wormdrive, D 4 09 ( ) Lever, Valve 9 ( ) Hose, Rbr, E90,.Id 0.8Id 8 ( ) Replm Kit, Screen 090 ( ) Scr Hexssm 8X ( ) Nut--Hxlocnyln M 8X. Reg Ss ( ) Scr--Hexssm 8X ( ) Washer, Flat, 0.8b 0.88d.08, Ss 4 ( ) Screen, Drain 8 ( ) Ftg Str Plastic 4 ( ) Hose, Pvc 4 ( ) Screw, Hex, M08 X. X, Ss ( ) Screw, Pan, #08 -- X ( ) Hose, Rbr, Pinch Valve 00XP MM40 (9-0) -4

54 STANDARD PARTS Fig. - Battery Group XP MM40 (9-0)

55 STANDARD PARTS Fig. - Battery Group EE, NA 8 ( ) Cable, Battery ( ) Cable Assy--Lead,.0, Ga 4 0 ( ) Cable, Battery 4 49 ( ) Cover, Terminal,Poly 00 ( ) Boot, 90Deg.0D.X.84 o ( ) Harness, Cable, Battery 488 ( ) Connector, Grey, SB0 o 8 ( ) Battery Kit V Ah Wet 8 4 ( ) Spacer, Battery.X.X ( ) Spacer, Battery.0X4.X ( ) Battery, V, Res Cap: 9 Wet 8 ( ) Strap, Poly, Webbing, 00 L (090-- ) Cable Assy--Lead,.0, Ga 990 ( ) Wire Assy, Cable, 4ga, Red ( ) Wire Assy, Cable, 4ga, Red 09 ( ) Screw, Pan, M X 0. X 0, ( ) Washer, Lock, Int, M Ss 84 ( ) Nut, Hex, Flexlock,.--8 o 9000 (008-- ) Charging Kit, Ci [Interlock, 00xp] (008-- ) Bracket, Connector [00xp] (008-- ) Switch, Snap, a, Rlr 0 09 (008-- ) Screw, Pan, M X 0.0 X 0, (008-- ) Plate, Switch, Guard 0 (008-- ) Washer, Lock, Int, M, Ss 4 04 (008-- ) Nut, Hex, Std, M X 0.0, (008-- ) Screw, Pan, M X 0.0 X, (008-- ) Harness, Adapter [Interlock] 00XP MM40 (9-0) -49

56 STANDARD PARTS Fig. 4 - Steering Control Group XP MM40 ( -0)

57 STANDARD PARTS Fig. 4 - Steering Control Group XP, CE 40 ( ) Handle, Speed Control 48 ( ) Grip, Handle, Round 09 ( ) Gear, Speed Control 4 0 ( ) Washer, Spacer, Speed Control 494 ( ) Bearing, Snap.8 Bore 08 ( ) Spring, Torsion Centering ( ) Potentiometer Assy, Electronic 8 0 ( ) Nut--Hx Thin ( ) Gear, 8 T. 4P 0 08 ( ) Plate, Shield 4 ( ) Scr--Flt Mx0. SS XP MM40 ( -0) -

58 STANDARD PARTS Fig. - Operator Console Group ( ) XP MM40 (9-0)

59 STANDARD PARTS Fig. - Operator Console Group ( ) 00 - XP, NA ( ) Housing, Steering, Adj, Elec, w/label 0 ( ) Panel, Touch, Switch 0 ( ) Bezel, Panel, Touch ( ) Clip, Stud, Receiver Speed 0 ( ) Door, Panel, Touch ( ) Latch 48 ( ) Rivet, Pop,.D X. X.Dhd ( ) Plugbtn.H. Max Blacknyl 9 80 ( ) Replm Kit, Rear Panel 0 9 ( ) Seal, Rbr,.X.8 X.0 o ( ) Meter, Discharge, Battery 8 ( ) Gasket, Hourmeter 00 ( ) Washer--Flt. Fender Pltd o 4 8 ( ) Switch Assy, Key Spst 84 ( ) Key Set 4 ( ) Breaker--Circuit 0 Resetable 9 ( ) Strip, Stop, Adj. Shroud 8 9 ( ) Breaker, Circuit 0 Amp 9 9 ( ) Breaker, Circuit, Amp 0 ( ) Boot--Circuit Breaker 88 ( ) Breaker--Circuit. Resetable 09 ( ) Diode, Bridge Amp 4 ( ) Plug, Switch 4 99 ( ) Plugbtn.0H.0--. Blacknyl o 4 ( ) Gauge, Hourmeter 8 ( ) Gasket, Hourmeter 0900 ( ) Scr Hexssm 8X. 8 8 ( ) Label, Blank, Dark Gray 9 4 ( ) Bracket, Locking, Shroud 0 89 ( ) Bracket, Steering Adjustment 44 ( ) Washer, Lock, Int. Ext,. 9 ( ) Nut, Hex, Std, M08 X. 00XP MM40 (9-0) -