Ceramic Trimmer Capacitors
|
|
|
- Melanie Dean
- 5 years ago
- Views:
Transcription
1 Ceramic Trimmer Capacitors Cat.No.T13E-14
2 Ceramic Trimmer Capacitors TZ3 Series c Features 1. Color coded case facilitates identifi cation of capacitance range. 2. Sealed construction prevents the penetration of fl ux and dust. 3. Available in two adjustment styles: Top/Rear. 4. Cross-shaped (+) slot enables automatic adjustment. 6 dia ±.2 dia..5±.2 Depth.5 min. 4 c Applications 1. Car audio systems 2. Car clocks 3. Stereos 4. Radio cassette tape recorders 5. Cordless telephones 6. Video games 7. Compact radio equipment 8. Remote keyless entry systems 9. Burglarproof devices F Type N Type 1.±.1 1.2±.1 6. dia ± ±.5.25±.5.2±.5 2.5±.2 dia. 1.±.1 Tolerance: ±.5 in mm.5±.2 Depth.5 min ±.1 Tolerance: ±.5 in mm 8 Part Number C min. (max.) (pf) C max. (pf) TC Q Rated Voltage Withstanding Voltage Stator/Case Color TZ3Z2R3p /-% NP±2ppm/ C 3min. at 1MHz, Cmax. 1Vdc 22Vdc Black TZ3Z5p /-% NP±2ppm/ C 5min. at 1MHz, Cmax. 1Vdc 22Vdc Blue TZ3Z7p /-% NP±2ppm/ C 5min. at 1MHz, Cmax. 1Vdc 22Vdc Blue TZ3Z1p /-% NP±2ppm/ C 5min. at 1MHz, Cmax. 1Vdc 22Vdc Blue TZ3R2p /-% N75±3ppm/ C 5min. at 1MHz, Cmax. 1Vdc 22Vdc Red TZ3R3p /-% N75±3ppm/ C 5min. at 1MHz, Cmax. 1Vdc 22Vdc Green TZ3P45p /-% N12±5ppm/ C 3min. at 1MHz, Cmax. 1Vdc 22Vdc Yellow TZ3P6p /-% N12±5ppm/ C 3min. at 1MHz, Cmax. 1Vdc 22Vdc Brown TZ3Z5p /-% NP±3ppm/ C 3min. at 1MHz, Cmax. 5Vdc 11Vdc Orange TZ3R9p /-% N75±3ppm/ C 3min. at 1MHz, Cmax. 5Vdc 11Vdc Black+Dot TZ3R121p /-% N75±3ppm/ C 3min. at 1MHz, Cmax. 5Vdc 11Vdc Black Insulation Resistance: 1M ohm Torque: 2. to 14.7mNm Operating Temperature Range: -25 to +85 C A blank column is fi lled with terminal type codes. 32
3 c Construction c Mounting Holes F Type N Type 1.3±.1 dia. 1.3±.1 dia. 3 dia. 1.1±.1 1.3± Tolerance: ±.5 in mm Tolerance: ±.5 ( in mm) c Temperature Characteristics TZ3Z7 Z7 (NP±2ppm/ C) TZ3R2 R2 (N75±3ppm/ C) Cap.Change (%) Temp. ( C) Cap.Change (%) Temp. ( C) TZ3P6 P6 (N12±5ppm/ C) TZ3Z5 Z5 (NP±3ppm/ C) Cap.Change (%) Cap.Change (%) Temp. ( C) Temp. ( C) Continued on the following page. 33
4 Continued from the preceding page. c Temperature Characteristics TZ3R121 R121 (N75±3ppm/ C) Cap.Change (%) Temp. ( C) c Frequency Characteristics TZ3Z7 TZ3R2 Z7 R Q 1 1 Capacitance (pf) Q 1 1 Capacitance (pf) Frequency (MHz) Frequency (MHz) TZ3P45 P45 TZ3P6 P Q 1 1 Capacitance (pf) Q 1 1 Capacitance (pf) Frequency (MHz) Frequency (MHz) Continued on the following page. 34
5 Continued from the preceding page. c Frequency Characteristics TZ3R9 R9 1 1 Q 1 1 Capacitance (pf) Frequency (MHz) c Temperature Profile Flow Soldering Profile Soldering profile for Lead-free solder (96.5Sn/3Ag/.5Cu), Eutectic solder (63Sn/37Pb) Temperature ( C) T1 T3 T2 t2 Heating Limit Profile Standard Profile Standard Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T2) Time (t2) 15 C 6 to 12sec. 25 C 5sec. max. Cycle of reflow 1 time t1 Pre-heating time (s) Limit Profile Pre-heating Heating Temp. (T1) Time (t1) Temp. (T3) Time (t2) 15 C 6 to 12sec. 265±3 C 5sec. max. Cycle of reflow 2 times Soldering Iron Standard Profile Temperature of soldering iron tip Soldering time Soldering iron power output Cycle of soldering iron 35±1 C 3sec. max. 3W max. 1 time c Notice (Storage and Operating Conditions) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitors, please store under the conditions of -1 to +4 C and 3 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of delivery. 5. Open the package just before using. 6. Prior to storing previously opened packages, the packaging should be heat-sealed. Avoid using rubber bands for repackaging. 7. Do not store under direct sunlight. 8. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfi de gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage or electric/magnetic fi elds (6) Direct sea breeze (7) Other variations of the above 8 35
6 c Notice (Soldering and Mounting) 1. Soldering (1) TZ3 series can be soldered by fl ow soldering method and soldering iron. Do not use refl ow soldering method. (2) Soldering conditions Refer to the temperature profi le. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specifi ed characteristics. (3) The dimension of mounting hole should be Murata's standard mounting hole used at fl ow soldering. The amount of solder is critical. Insuffi cient amounts of solder can lead to insuffi cient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to fl ux wicking up. (4) When using soldering iron, the string solder shall be applied to the lower part of the terminal only. Do not apply fl ux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fi xed rotor or the contact failure due to fl ux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (5) Our recommended chlorine content of string solder is.5wt% max. (6) Do not use water-soluble fl ux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply fl ux only to terminals. 2. Mounting (1) Do not apply excessive force (preferably 5. N [Ref: 5gf] max.), when the trimmer capacitor is mounted on the PCB. (2) Use the suitable PCB holes that are the same pitch as the terminal of the trimmer capacitor. If it does not fi t the terminal, excessive stress may be applied to the terminal and the trimmer capacitor may deviate from the specifi ed characteristics. (3) Do not apply bending stress more than 1.N (Ref: 1kgf) after the trimmer capacitor has been mounted on the PCB. (4) Mount trimmer capacitor in contact with PCB. (5) When bending the terminals, do not apply excessive force to the body of the product to protect the terminal fi xing part from damage. 3. Cleaning Isopropyl alcohol and ethyl alcohol are available material for cleaning. If you use any other type of solvents, please evaluate performance in your application. Moreover, please confi rm that no damage has occurred to the trimmer capacitor after cleaning in your conditions. 4. Other Note the polarity of the trimmer capacitor to minimize infl uence by stray capacitance. (Refer to the dimensions concerning the polarity.) 8 c Notice (Handling) 1. Use suitable screwdrivers that fi t comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR1 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT1 2. When adjusting with a screwdriver, do not apply excessive force (preferably 1. N [Ref: 1gf] max.) to minimize capacitance drift. Excessive force applied to the screwdriver slot may cause deformation of the products. 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. c Notice (Other) Before using trimmer capacitors, please test after assembly in your particular mass production system. 36
7 Recommended Adjustment Tools Please use the following recommended screwdrivers. You can order these drivers using the part numbers below. Although you can also adjust the capacitance value using commercial products, please use one with the same head size as the driver listed below. c For Manual Adjustment Series MURATA Model Number Manufacturer s Model Number Shape 8 TZR1 KMDR16 KMDR Minus (.3x.13) 8 TZS2 KMDR5 KMDR5 1.5 Square (.54x.54) TZY2 KMDR6 ENGINEER INC. DA-89 Minus (.8x.35) 125 TZV2 KMDR2 VESSEL MFG. NO.9 -.9g3 15 Minus (.9x.4) TZC3 TZB4 TZ3 KMDR1 KMDR1 2 Minus (2.2x.4) TZW4 KMDR13 VESSEL MFG. NO.9-1.3g3 CERAMIC BLADE ELECTRONICS Minus (1.3x3) Continued on the following page. 39
8 Recommended Adjustment Tools Continued from the preceding page. c For Automatic Adjustment Series MURATA Model Number Manufacturer s Model Number Shape 2 2 TZS2 KMBT5 KMBT5 Square (.54x.54) 1.8 dia TZY2 KMBT6 KMBT6 Minus (.56x.25) 2.4 dia TZV2 KMBT2 KMBT2 Minus (.9x.4) 2.4 dia. 3 TZC3 TZB4 TZ3 KMBT1 KMBT1 Minus (2.2x.4) 2.2 dia. 4
9 Qualified Standards The products listed herein have been produced by a QS9 and ISO91 certified factory Sabae Murata Mfg. Co., Ltd. MURATA FACTORY No ODCs (Ozone Depleting Chemicals) are used on any Murata trimmer potentiometers. 41
10
Ceramic Trimmer Capacitors
Ceramic Trimmer Capacitors TZ3 Series c Features 1. Color coded case facilitates identifi cation of capacitance range. 2. Sealed construction prevents the penetration of fl ux and dust. 3. Available in
Ceramic Trimmer Capacitors
Ceramic Trimmer Capacitors TZC3 Series c Features 1. Small size with external dimension of 3.2(W)x4.5(L)x1.6(H)mm. 2. Color coded stator permits easy identifi cation of capacitance and reduces mounting
Ceramic Trimmer Capacitors
Ceramic Trimmer Capacitors TZB4 Series.6±.1 Depth.5 1.4±.1 dia. c Features 1. Miniature rectangular shape: 4.(W)x4.5(L)x3.(H)mm. 2. Color coded case facilitates identifi cation of capacitance range. 3.
Ceramic Trimmer Capacitors
Ceramic Trimmer Capacitors EU RoHS Compliant For r o ur 'Mur A ro c o ' Contents Part Numbering Selection Guide of Ceramic Trimmer Capacitors p p3 Product specifications are as of May 0. Bluetoothr is
CHIP TRIM CERAMIC TRIMMER CAPACITORS AT 0300 RoHS & AT 1300 RoHS
AT 0300 & AT 1300 SURFACE MOUNT TRIMMER CAPACITORS, COMPLIANT Description Very compact package type Ceramic dielectric Special design for reflow soldering use Rated voltage 100 VDC Low temperature coefficient
MLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/11 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
Shielded SMT Power Inductor SPRI2D10P Series
Part : SPRI2D10P SERIES Version : AD Page : 1 / 6 Feature Shielded SMT Power Inductor SPRI2D10P Series Low profile, low Rdc, and high current handling capacities. Magnetically shielded structure that ensures
MLCC APPLICATION GUIDE
MLCC APPLICATION GUIDE 1/10 No. Process Condition 1 Operating Condition (Storage) 1) The capacitor must be stored in an ambient temperature between 5 ~ 40 with a relative humidity of 20 ~ 70%. The products
SMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
No Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
PECIFICATIONS Model TC03 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric.
PECIFICATIONS Model TC3 Page 3 1. Scope This specification applies to the ceramic type trimmer capacitor using ceramic as a dielectric. 2. Main characteristics Table 1 Part No. TC3Z5H169B TC3Z1H169B TC3R1H169B
Low Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
Metal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
50 TZV 1500 M JDE VB 18X21.5
EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Soft Termination High Voltage Series (SH_200V to 3000V) NP0 & X7R Dielectrics 0603 to 1812 Sizes, 200V to 3000V Halogen Free & RoHS Compliance *Contents in this sheet are
3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS
3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS Hi-CAP (Conductive Polymer Aluminum Electrolytic Capacitor) Hi-CAP is an electrolytic capacitor that uses a highly electric conductive polymer as it
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/74/71163930.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Fl Recommended Land Pattern: [mm] pl1 pl2 fw Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 ±0.2 V RMS, 1 MHz ±10% C 150 pf ±5% Rated Voltage U R 25 V
WCAP-CSSA Ceramic Capacitors
A Dimensions: [mm] B Recommended land pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1±0.2 Vrms, 1 khz ±10% C 2200 pf ± 10% Rated voltage U R 250 V (AC)
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance
MULTILAYER CERAMIC CAPACITORS 0402, 0603 & 0805 Sizes NP0 Dielectric RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page of ASC_ HQ_Low ESR_(HH)_006N_AS Apr. 202 .
3mm Photodiode PD204-6B
3mm Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high
High Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
S SERIES X1/Y2 SAFETY CAPACITOR SPEC
FEATURES - Peak Impulse Surge: 5,000 VDC - Dielectric withstand strength: 1,500VAC PART NUMBER DESCRIPTION 1808 S 302 N 100 J C E Size Series Rated Voltage Dielectric Capacitance Tolerance Termination
Low signal distortion Chip Common Mode Choke Coil for audio DLM11GN601SD2
Spec No. JEFL243D-0004F-0 P/8 Low signal distortion Chip Common Mode Choke Coil for audio DLMGN60SD2 5.Style and Dimensions 0.2±0.5 0.5±0. Reference Specification.Scope This reference specification applies
1. INTRODUCTION 2. FEATURES 3. APPLICATIONS 4.HOW TO ORDER
1. INTRODUCTION General Purpose Multilayer capacitors supplied in bulk or tape & reel package are ideally suitable for thick film hybrid circuits and automatic surface mounting on any printed circuit boards.
1.2 Scope: This specification is applied Noise Filter STC-D series supplied
1.0 PURPOSE / SCOPE 1.1 Purpose: To define the quality of Noise Filter STC-D series. 1.2 Scope: This specification is applied Noise Filter STC-D series supplied by SMI-ED. 2.0 GENERAL 2.1 Reference 2.1.1
Reference Only. Spec. No. JENF243G 0004G-01 P 1 / 12. Ferrite Bead Inductor BL02/BL03 Series
Spec. No. JENF243G 0004G-01 P 1 / 12 1. Scope Ferrite Bead Inductor B02/B03 Series Reference Specification This reference specification applies Ferrite Bead Inductor (Radial Type). 2. Part Numbering (Ex.)
Microwave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
Applications: 1808 N 100 J 202 C T. Size Dielectric Capacitance Tolerance Rated Voltage Termination
Features: High voltage in a given case size. High stability and reliability. How To Order: MC Multicomp Description: The middle and high voltage series MLCC is designed by a special internal electrode
Reference Only. Spec No. JEFL243E-0004W P1/9. This reference specification applies to Chip Common Mode Choke Coil DLP11SN Series. 2.
Spec No. JEFL243E-0004W P1/9 Chip Common Mode Choke Coil DLP11SN L2 Reference Specification 1.Scope This reference specification applies to Chip Common Mode Choke Coil DLP11SN Series. 2.Part Numbering
ERB Series. High Frequency Ceramic Capacitors. ERB Product Summary
ERB Product Summary : Exhibiting a capacitance range of 0.5 to 1,000pF, the ERB series of capacitors comes with higher Q and lower ESR which is better than the standard products of equivalent packages.
Reference Only. Spec No.JEFL243E-0010E-01 P1/9 Chip Common Mode Choke Coil Arrays DLP2ADA HL4
Spec No.JEFL243E-0010E-01 P1/9 Chip Common Mode Choke Coil Arrays DLP2ADA HL4 Reference Specification 1.Scope This reference specification applies to Chip Common Mode Choke Coil Arrays DLP2ADA Series.
5mm Silicon PIN Photodiode, T-1 3/4 PD333-3B/H0/L2
Features Fast response time High photo sensitivity Small junction capacitance Pb free This product itself will remain within RoHS compliant version. Description is a high speed and high sensitive PIN photodiode
Open-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
All part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/82/85449595.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] pl1 pl2 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 ±0.2 V RMS, 1 khz ±10% @25 C C 100 nf ±10% Rated Voltage U R 25 V
Multilayer Ceramic Chip Capacitors
HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Capacitor Arrays Series (10V to 100V) 4 x 0402, 4 x 0603 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without
MULTILAYER CERAMIC CAPACITORS
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC s MT
Chip Trimmer Potentiometer
Chip Potentiometer RH0/RH0 Series A general purpose, compact, and low-profile type that is suitable for a wide range of applications. Car Use Features Conforms to JIS C 0806- (Packaging of surface mount
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
5484BN/R7DC-AHJB/XR/MS(ELA)
Features High luminous intensity output Oval Shape Well defined spatial radiation Wide viewing angle (2θ 1/2 ) : 110 / 40 UV resistant epoxy The product itself will remain within RoHS compliant version
ST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
*Contents in this sheet are subject to change without prior notice.
MULTILAYER CERAMIC CAPACITORS Automotive Capacitor Arrays Series (MY) Qualified to 4 x 0402, 4 x 0603 Sizes NP0 & X7R Dielectrics Halogen Free & RoHS Compliance *Contents in this sheet are subject to change
HIGH POWER THICK FILM CHIP FIXED RESISTOR
HIGH POWER THICK FI CHIP FIXED RESISTOR 2W High power up to 2W Current detecting resistors for power supply, motor circuits ROHS Compliant with RoHS directive etc Halogen free requirement Switching Power
Prosperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components
Metal Oxide Film Resistors Axial Connections Metal Oxide Film Resistors 1/4W, 5% Components High safety standard, high purity ceramic core Excellent non-flame coating Stable performance in diverse environment,
Applications: MCY 4C 3 B 103 K 500 C T. Two significant digits followed by no. of zeros. And R is in place of decimal point.
Description: WTC middle and high voltage series MLCC is designed by a special internal electrode pattern, which can reduce voltage concentrations by distributing voltage gradients throughout the entire
Safety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
EVERLIGHT ELECTRONICS CO., LTD.
Lead (Pb) Free Product - RoHS Compliant Feature Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for automatic insertion equipment. Total flux: 7150 to 14250 mlm at 70mA.
Reference Only. Reference Specification
Spec No. :JEFL243E-0023B-01 P 1/10 Chip Common Mode Choke Coil DLP0RSN HP2 Reference Specification 1. Scope This reference specification applies to Chip Common Mode Choke Coil DLP0RSN Series for differential
Reference Only. Spec No.JEFL243D-0009E-01 P1/10 Chip Common Mode Choke Coil DLM0NS HY2
Spec No.JEFL243D-0009E-01 P1/10 Chip Choke Coil DLM0NS HY2 Reference Specification 1.Scope This reference specification applies to Chip Choke Coil DLM0NS Series for differential signal interface in Electronics.
3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers
TOCOS POTENTIOMETERS 3mm Surface Mount, Single-Turn, Sealed Cermet Trimmers RoHS Compliant IMPROVED DESIGN Pb-Free and Cd-Free Features 3mm square SMD, single-turn, sealed cermet trimmers Available in
SPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance
MULTILAYER CERAMIC CAPACITORS Middle & High Voltage Series (200V to 4kV) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics Halogen Free & RoHS compliance *Contents in this sheet are subject to change without
Applications. Capacitance Tolerance G = ±2% J = ±5%
Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical
Ceramic Tuning Tools CTZ Series Ultraminiature Trimmer Capacitors TCX, TCF, TSR, TSX, TSF, TSW Series
Trimmer Capacitors Multilayer Ceramic Chip Trimmer Capacitors CTZ2 Series... 3-6 CTZ3 Series... 7-10 Test Methods...11 Chip Trimmer Capacitor Packaging CTZ2 / CTZ3 Series... 12 Ceramic Tuning Tools CTZ
Reference Only. Spec No. JEFL243E-0018F-01 P1/10
Spec No. JEFL243E-0018F-01 P1/10 Chip Common Mode Choke Coil DLP0NS HL2 Reference Specification 1. Scope This reference specification applies to Chip Common Mode Choke Coil DLP0NS Series. 2. Part Numbering
Reference Only Spec. No. JEFL243B 0003F-01 P 1/ 6
Spec. No. JEFL243B 0003F-01 P 1/ 6 DC Common Mode Choke Coil PLT09HN2003R0P1B Reference Specification 1. Scope This reference specification applies to DC Common Mode Choke Coil (PLT09H Series). 2. Part
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
Recommended Hole Pattern: [mm]
![Recommended Hole Pattern: [mm]](/thumbs/77/74984900.jpg "Recommended Hole Pattern: [mm]")
Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 680 nf ±10% Rated Voltage U R 400 V (DC) Insulation
Specification SPW08F0D
Specification SPW08F0D Drawn SSC Approval Customer Approval SPW08F0D 1. Description 2. Absolute Maximum Ratings 3. Electro Optical Characteristics 4. Characteristic Diagram 5. Reliability 6. CIE Chromaticity
SURFACE MOUNT MONOLITHIC CHIP CAPACITORS COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series
COG AND TEMPERATURE COMPENSATING TYPES GRM36/39/40/42-6/42-2/43-2/44-1 Series FEATURES Miniature size No Polarity Nickel Barrier Termination Standard highly resistant to metal migration Uniform dimensions
Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch
ProLight PM2G-1LYE-WSL 1W 370nm + 400nm Power LED Technical Datasheet Version: 1.3 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Typical
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at www.hest ore.hu. Description: MLCC consists of a conducting material and electrodes. To manufacture
Metal Oxide Varistor:TVM-G Series
Features 1. RoHS compliant 2. Low clamping voltage 3. EIA size 0402, 0603, 0805 4. Working voltage: 5.5 ~ 30 Vdc 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer ceramic construction
Ceramic Chip Capacitors
Introduction RGA Multilayer Ceramic Capacitors are constructed by screen printing alternative layers of internal metallic electrodes onto ceramic dielectric materials and firing into a concrete monolithic
LAMP UTW/S400-X9/T10(WS)
Features Popular 5mm package High luminous power Typical chromaticity coordinates x=0.24, y=0.20 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 150V The product itself
MULTILAYER CERAMIC CAPACITORS Safety Certified X1/Y2 Series 1808 to 2220 Sizes NP0 & X7R Dielectrics RoHS Compliance
Safety Certified X1/Y2 MULTILAYER CERAMIC CAPACITORS Safety Certified X1/Y2 Series 1808 to 2220 Sizes NP0 & X7R Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice.
Features. Typical Applications G9 Candle Light. ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: DS-0384
ProLight PTA2-3LxE-N3Lxx 3W AC LED Technical Datasheet Version: 1.1 Features High Color rendering index High flux per LED Good color uniformity Industry best moisture sensitivity level - JEDEC Level 1
3mm Advanced Super Flux LEDs B84-YSC-A1T1U1DH-AM
3mm Advanced Super Flux LEDs Feature RoHS compliant. Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for automatic insertion equipment. Total flux: 7150 to 14250 mlm at
Reference Only. Spec No. JEFL243B-9101F-01 P1/10
Spec No. JEFL243B-9101F-01 P1/10 SMD type common-mode choke coil PLT10HH PN Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to SMD type common-mode choke
RS INDUSTRY LIMITED. RS Chip Single ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: Part Name RS INDUSTRY LIMITED Chip ESD Part No. RS 0402-5V500S Lot No. PART
Common mode ESD filter LXES**D series Document No. LX Rev1.2
Common mode ESD filter LXES**D series Document No. LX 1-1126 Rev1.2 1. This specification shall be applied to the ESD Protection Device. LXES11DAA2-135 LXES21DAA4-136 LXES11DAA2-137 LXES21DAA4-138 LXES21DAA4-14
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Safety Certified Applications FEATURES Approved IEC 60384-14 Specialty: safety certified capacitors Wet build process Reliable Noble Metal Electrode
ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET
TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING
1. Scope: This specification for approval relates to Cement Fixed Resistors
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form: ( Ex.) PRW 5W J 1.2 Type Power Rating Resistance Nominal Tolerance Resistance
TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x MHz
TAI-SAW TECHNOLOGY CO., LTD. TCXO SMD 3.2x2.5 24.0000MHz MODEL NO.: TX0283D REV. NO.: 1 Revise: Rev. Rev. Page Rev. Account Date Ref. No. Revised by 1 N/A Initial release 4/19/10 N/A C.C. Hsu 2 TAI-SAW
M SERIES ULTRA HIGH Q CAPACITOR SPEC
FEATURES: - Ultra High-Q and low ESR - Extended working range for wireless products - Extended battery life of portable devices PART NUMBER DESCRIPTION 42 M 25 N R1 B C T Size Series Rated Voltage (VDC)
Reference Only. 1. Scope This reference specification applies to Chip EMIFIL LC Combined Array Type NFA18S Series.
Spec. No. JENF243D-7L-1 P 1/ 11 Chip EMIFIL LC Combined Array Type NFA18S 1A45 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Array Type NFA18S Series.
AREP Series Aluminum Solid Electrolytic Capacitors Aluminum Solid Electrolytic Capacitors
Features -Super low ESR, high ripple current capability -Rated voltage:6.3~35vdc -Endurance:5,000 hours at 105ºC -Suitable for DC-DC converters, voltage regulators and decoupling applications -RoHS Compliant
SC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
RS INDUSTRY LIMITED. RS Chip Array ESD Suppressor APPROVAL SHEET. Customer Information. Part No. : Model No. : COMPANY PURCHASE R&D
APPROVAL SHEET Customer Information Customer : Part Name : Part No. : Model No. : COMPANY PURCHASE R&D Vendor Information Name: RS INDUSTRY LIMITED Part Name ARRAY TYPE MULTILAYER VARISTOR Part No. RS
Electric Double Layer Capacitors Product Specification. To. : DATE : SPECIFICATION WRITTEN CHECKED APPROVED
To. : DATE : 200... SPECIFICATION PRODUCT MODEL : STARCAP : DCS series WRITTEN CHECKED APPROVED 1 Index Page No. ITEM etc. 1 Cover Page 2 Index 1. Scope 2. Part Number System 3 3. Product Model Name 4.
WCAP-FTXX Film Capacitors
A Dimensions: [mm] B Recommended hole pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 0.1000 µf ± 10% Rated voltage U R 310 V (AC)
Percentage tp the rated volt. Temperature ( )
1 Instructions for handling For use of any type of capacitor, you are recommended to obtain individual specification in advance and use it within the limits specified thereby. Use beyond such limits may
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
LAMP /T2C3-4LQA
Features Popular T-1 round package High luminous power. Typical chromaticity coordinates x=0.30, y=0.29 according to CIE1931. Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
Recommended Land Pattern: [mm]
![Recommended Land Pattern: [mm]](/thumbs/84/89483599.jpg "Recommended Land Pattern: [mm]")
Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated
5mm Phototransistor T-1 3/4 PT334-6C
Features Fast response time High photo sensitivity Pb free The product itself will remain within RoHS compliant version. Description is a high speed and high sensitive silicon NPN epitaxial planar phototransistor
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
Chip tantalum capacitors (Fail-safe open structure type)
TCFG1C6M8R Chip tantalum capacitors (Fail-safe open structure type) TCFG Series Case Features 1) Safety design by open function built - in. 2) Wide capacitance range 3) Screening by thermal shock. Dimensions
Ceramic PTC Thermistor: PT Series
Sensor Features. RoHS compliant 2. Small size 3. Very fast reaction time 4. Wide range of protection temperatures 5. Stable over a long life 6. Operating temperature range: 0 ~ Ts+25 C (V=Vmax) 7. Agency
0805 CG 102 J 500 N T
NPO/COG for General-use is class I high frequency capacitor, its capacitance is very stable, almost will not change along with the temperature, voltage and time. Specially be suitable for high frequency
Main Applications CCTV Wireless communication Indoor Lighting Outdoor Lighting
ProLight PK2N-2LJE-SD 2W Infrared 850 Power LED Technical Datasheet Version: 1.6 Features Instant light (less than 100ns) Lead free reflow soldering RoHS compliant Cool beam, safe to the touch Superior
LAMP /T2C1-4WYC
Features Popular T-1 3/4 round package High luminous power Typical chromaticity coordinates x=0.30, y=0.29 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
Technical Data Sheet 3ψ Infrared Piranha
Technical Data Sheet 3ψ Infrared Piranha Features High reliability High total radiated power Peak wavelength λp=730nm Low forward voltage Pb free The product itself will remain within RoHS compliant version.
Double Layer Capacitors. PN: NEX_ series & NED_ series
Rev B - August 2010 www.niccomp.com Technical support: tpmg@niccomp.com Double Layer Capacitors PN: NEX_ series & NED_ series NEXC SMT Reflow Soldering NEXA / NEXG NEXS / NEXT Low Profile Radial LDD NEXM