VGG UFLWG SPEC ONLY 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
|
|
- Susanna Turner
- 5 years ago
- Views:
Transcription
1
2 VGG UFLWG SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute Maximum Ratings 6 8 Electrical Characteristics 7 9 Block Diagram 9 10 Input / Output Terminals Pin Assignment Interface Timing Optical Characteristics Reliability Test Packaging Precautions Outline Drawing Definition of Labels Incoming Inspection Standards 31
3 VGG UFLWG SPEC ONLY 3 2. Record of Revisions Rev. Comments Page Date 1 Preliminary Specification was first issued. All 1/19 17
4 VGG UFLWG SPEC ONLY 4 3. Module Numbering System V G G U F L W G Backlight Color: N:Without Backlight; A:Amber; B:Blue; G:Green; L:Yellow; O:Orange; R:Red; W:White; Y:YellowGreen; X:Others Backlight Type: N:Without Backlight; E:EL; F:CCFL; L:General LED; H:High NTSC LED ; R:RGB LED; X:Others LCD Model: T:TN; H:HTN; G:STN Gray; Y:STN Yellow; B:STN Blue; W:FSTN Black/White; X:FFSTN I:IBN ; D:DSTN C:CSTN; F:TFT; O:OLED; P:PLED; L:LTPS; N:Others LCD Type: R: Reflective/Positive; S : Reflective/Negative ; F : Transflective/Positive ; G: Transflective/Negative ; U: Transmissive/Positive ; T: Transmissive/Negative ; N:Others Temperature Range & View Direction: General Purpose : 1:6H 2:12H 3:3H 4:9H 5:Others High Performance: 6:6H 7:12H 8:3H 9:9H 0:Others STD Product Serial No.: 01~99 Customer Made Serial No.: A1,A2 A9,B1,B2 B9,C1.. Display Function: Segment Number / Characters Lines / Column and Row Dots / Length * Width of Other Display Type: C:Character Type; G:Graphic Type; S:Segment Type; O:Other Package Type: B:COB; F:COF; G:COG; H:Heat Seal; S:SMT; T:TAB; O:Others
5 VGG UFLWG SPEC ONLY 5 4. Application This specification is applied to the 8.0 inch WVGA supported TFT-LCD module With projected capacitive touch (PCT), and can display true 16M colors(8 bit/ color). The module is designed for OA, Car TV application and other electronic products which require flat panel display of digital signal interface. This module is composed of a 8.0 TFT-LCD panel, a driver circuit and LED backlight unit and used as the input devices for general electric appliances via both finger and Capacitive stylus pen. 5. Features - WVGA ( pixels) resolution. - LVDS Receiver 24 bit Interface. - Dot inversion mode with stripe type. - Projected Capacitive Touch USB Interface Multi Touch (Ten points) 6. General Specifications Item Specifications Unit Screen Size 8.0 (Diagonal) inch Display Format 800RGB(H) 480(V) dot Active Area (H) 99.36(V) mm Pixel Size (H) (V) mm Pixel Configuration RGB Vertical Stripe - Display Mode TN Type / Transmissive Mode / Normally White - Surface Treatment Clear(7H) - Viewing Direction 6 O clock (The Gray Inversion will appear at this direction) - Outline Dimension 192.8(W) 116.9(H) 11.01(D) mm LVDS Receiver IC THine THC63LVDF84C - Weight (TBD) g RoHS Compliance Evervision certifies this product to be in compliance with European Union Directive 2011/65/EU on the restriction of certain hazardous substances in electrical and electronic equipment. -
6 VGG UFLWG SPEC ONLY 6 7. Absolute Maximum Ratings 7.1 Absolute Ratings of Environment Item Symbol Min. Value Max. Unit Note Storage Temperature T ST C (1)(2) Operating Ambient Temperature T OP C (1)(2) Note1: Background color changes slightly depending on ambient temperature. This phenomenon is reversible. Note2: Please refer to item of RELIABILITY. 7.2 Electrical Absolute Ratings TFT-LCD Module Item Symbol Min. Value (Ta=25±2 C, GND=V SS =0V) Max. Unit Digital Power Supply Voltage V DD V - Note LED Driver Absolute Maximum Ratings (Ta=25±2 C) Item Symbol Value Min. Max. Unit Note LED Driver Supply Voltage VLED V (1) LED Driver PWM PWM V (1) Note (1) Permanent damage to the device may occur if maximum values are exceeded or reverse voltage is loaded. Note (2) Each one operation must be follow diagram of Ambient Temperature and Allowable Forward Current
7 VGG UFLWG SPEC ONLY 7 8. Electrical Characteristics 8.1 TFT-LCD Module (Ta=25±2 C) Item Symbol Value Min. Typ. Max. Unit Note Power Supply Voltage V CC V - Power Supply Current I CC - (TBD) (TBD) ma (1) Differential Input High Threshold Voltage Differential Input Low Threshold Voltage V TH mv - V TL mv - Power Consumption P L - (TBD) (TBD) mw (1) VSYNC Frequency F V Hz - DCLK Frequency DCLK MHz - Note (1) The specified power consumption is under the conditions at V CC =3.3V, F V =60Hz, whereas a power dissipation check pattern below is displayed. Black Pattern / 0 Gray Active Area
8 VGG UFLWG SPEC ONLY Backlight Unit (Ta=25±2 C) Item Symbol Value Min. Typ. Max. Unit Note Voltage of LED Driver Unit VLED V - Current of LED Driver Unit ILED - (TBD) (TBD) ma VLED=12V B/L=300mA PWM signal Low voltage VPWML V - PWM signal High voltage VPWMH V - PWM frequency fpwm Hz - PWM Pulse width tpwmh us - LED Life Time(25 ) hr (1) Note (1):LED life time is defined as under 25±2 C, when the average brightness decrease to 50% of original brightness 8.3 Projected Capacitive Touch Item Symbol Value Min. Typ. Max. (Ta=25±2 C) Unit Note Power Supply Voltage VDD V - Power Supply Current IDD ma (1) Output High Threshold Voltage V OH V - Output Low Threshold Voltage V OL V - Differential Input Sensitivity (D+)-(D-) Differential Input Common Mode Range V DI V - V CM V Power Consumption P L Report Rate R R Hz - Interface USB - Function Multi Touch - Note (1) This test condition is touched with 10 points.
9 VGG UFLWG SPEC ONLY 9 9. Block Diagram 9.1 TFT-LCD Module with Backlight Unit 8 inch TFT LCD Panel 800(RGB)x480 Pixel 5S5P LED BLU Source Driver with build-in Timing controller Gate Driver LCM Projected Capacitive Touch LVDS Receiver DC/DC Converter LED Diver TFT Connector PCB Interface Touch Panel Interface
10 VGG UFLWG SPEC ONLY Input / Output Terminals Pin Assignment 10.1 TFT-LCD Module Connector: HIROSE DF19G-30P-1H or Equivalent Pin No. Symbol I/O Description 1 VCC I +3.3V power supply 2 VCC I +3.3V power supply 3 GND I Ground 4 GND I Ground 5 RIN3+ I LVDS Signal (+) Channel 3 6 RIN3- I LVDS Signal (-) Channel 3 7 GND I Ground 8 RCLK+ I LVDS Clock Signal (+) 9 RCLK- I LVDS Clock Signal (-) 10 GND I Ground 11 RIN2+ I LVDS Signal (+) Channel 2 12 RIN2- I LVDS Signal (-) Channel 2 13 GND I Ground 14 RIN1+ I LVDS Signal (+) Channel 1 15 RIN1- I LVDS Signal (-) Channel 1 16 GND I Ground 17 RIN0+ I LVDS Signal (+) Channel 0 18 RIN0- I LVDS Signal (-) Channel 0 19 GND I Ground 20 GND I Ground
11 VGG UFLWG SPEC ONLY 11 Pin No. Symbol I/O Description 21 NC I Not Connection 22 NC I Not Connection 23 NC I Not Connection 24 NC I Not Connection 25 BLEN I Note 1 26 NC I Not Connection 27 VLED I LED driver power supply 28 VLED I LED driver power supply 29 GND I Ground 30 GND I Ground Note 1: To use PWM dimming, apply a 100Hz to 1kHz square wave signal with amplitude greater than 1.5V to this pin Projected Capacitive Touch Connector: CVILUX CF25101D0R0-05 Pin No. Symbol I/O Description 1 GND I System ground. 2 VDD I +5.0V power supply. 3 NC - Not Connection 4 NC - Not Connection 5 NC - Not Connection 6 NC - Not Connection 7 NC - Not Connection 8 D- I/O USB D- 9 D+ I/O USB D+ 10 GND I System ground.
12 VGG UFLWG SPEC ONLY Color Data Input Assignment The brightness of each primary color(red, green and blue) is based on the 8 bit gray scale data input for the color. The higher the binary input, the brighter the color. The table provides the assignment of color versus data input. Data Signal Color Red Green Blue R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red Green Basic Colors Blue Cyan Magenta Yellow White Red(0) / Dark Red(1) Gray Scale Of RED Red(2) : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Red(253) Red(254) Red(255) Green(0) / Dark Green(1) Gray Scale Of Green Green(2) : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Green(253) Green(254) Green(255) Blue(0) / Dark Blue(1) Gray Scale Of Blue Blue(2) : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : : Blue(253) Blue(254) Blue(255)
13 VGG UFLWG SPEC ONLY Power ON/OFF Sequence POWER SEQUENCE TABLE Value Parameter Min. Typ Max. Units T ms T ms T ms T ms T ms T ms
14 VGG UFLWG SPEC ONLY Interface Timing 11.1 Input Signal Characteristics
15 VGG UFLWG SPEC ONLY LVDS Switching Characteristics
16 VGG UFLWG SPEC ONLY Timing
17 VGG UFLWG SPEC ONLY Waveform
18 VGG UFLWG SPEC ONLY LVDS AC Timing
19 VGG UFLWG SPEC ONLY LVDS Input data mapping 11.7 USB Interface Single Touch Function Single Touch Function works with plug n play under system Windows 2000, Windows XP and Windows 7. For other operating systems like Linux a driver must be programmed Multi Touch Function The Multi Touch Function works with plug n play under system Windows 7. For older Windows systems or other operating systems a driver must be programmed.
20 VGG UFLWG SPEC ONLY Optical Characteristics The optical characteristics should be measured in a dark environment ( 1 lux) or equivalent state with the methods shown in Note (4). Item Symbol Conditions Min. Typ. Max. Unit Note Contrast Ratio CR 400 (500) - - (2) Response Time T R ms T F ms x =0, Y =0 (3) Luminance(Center) Y Viewing Normal 790 (880) - cd/m 2 (4) Angle Brightness uniformity BUNI 70 (75) - % (5) Color Chromaticity White Wx Wy Viewing Angle Horizontal Vertical x + 60 (70) - x - 60 (70) - CR 10 Y + 40 (50) - Y - 60 (70) - deg. (1),(4)
21 VGG UFLWG SPEC ONLY 21 Note (1) Definition of Viewing Angle ( x, y): Normal x = y = 0º y- y X- = 90º x- x x y+ 12 o clock direction y+ = 90º 6 o clock y- = 90º y- x+ X+ = 90º Note (2) Definition of Contrast Ratio (CR): Note (3) Definition of Response Time (T R, T F ): White White 100% 90% Optical Response 10% Black 0% Time T R T F
22 VGG UFLWG SPEC ONLY 22 Note (4) Measurement Set-Up: The LCD module should be stabilized at a given temperature for 30 minutes to avoid abrupt temperature change during measuring. In order to stabilize the luminance, the measurement should be executed after lighting Backlight for 30 minutes in a dark room or equivalent condition. LCD Module LCD Panel Center of the Screen Photometer (TOPCON BM-7 Fast) Field of View = 1º 500 mm Light Shield Room (Ambient Luminance < 1 lux) Note (5) Definition of brightness uniformity Brightness uniformity=(min Luminance of 9 points)/(max Luminance of 9 points) 100%
23 VGG UFLWG SPEC ONLY Reliability Test No. Test Items Test Condition Remark 1 High Temperature Storage Test T a = hours (1),(3),(4) 2 Low Temperature Storage Test T a = hours (1),(3),(4) High Temperature Operation Test Low Temperature Operation Test High Temperature and High Humidity Operation Test Electro Static Discharge Test (non-operating) Mechanical Shock Test (non-operating) Vibration Test (non-operating) T S = hours (2),(3),(4) T a = hours (1),(3),(4) T a =60 90%RH 240 hours (3),(4) -Panel Surface/Top Case : 150pF, 330Ω Air: ±15kV, Contact: ±8kV Half sine wave, 100G, 6ms 3 times shock of each six surfaces Sine wave:10 ~ 55 ~ 10Hz amplitude:1.5mm 3 axis,2 hours/axis (3) (3) (3) 9 Thermal Shock Test (non-operating) -20 (30min) ~ 70 (30min), 10 cycles (3),(4) 10 Drop Test(with Carton) Height: 80cm 1 corner, 3 edges, 6 surfaces (3) Note 1:Ta is the ambient temperature of samples. Note 2:Ts is the temperature of panel s surface. Note 3:In the standard condition, there shall be no practical problem that may affect the display function. After the reliability test, the product only guarantees operation, but don t guarantee all of the cosmetic specification. Note 4:Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at room temperature.
24 VGG UFLWG SPEC ONLY Packaging ITEM SIZE(L W H) unit:mm MATERIAL ANTI-STATIC PE BAG CARD BOARD CARD BOARD EXTERNAL BOX PRODUCT PARTS LIST x355x CARTON CARTON CARTON Q.T.Y CARD BOARD CARTON NOTE
25 VGG UFLWG SPEC ONLY Precautions 15.1 Assembly and Handling Precautions (1) Do not apply rough force such as bending or twisting to the module during assembly. (2) It s recommended to assemble or to install a module into the user s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer. (3) Don t apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight. (4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips. (5) Do not plug in or pull out the I/F connector while the module is in operation. (6) Do not disassemble the module. (7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) Moisture can easily penetrate into LCD module and may cause the damage during operation. (9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD module in the specified storage conditions. (10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow Safety Precautions (1) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. In case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (2) After the module s end of life, it is not harmful in case of normal operation and storage Terms of Warrant (1) Acceptance inspection period The period is within one month after the arrival of contracted commodity at the buyer s factory site. (2) Applicable warrant period The period is within twelve months since the date of shipping out under normal using and storage conditions.
26 VGG UFLWG SPEC ONLY Cautions for LCM s installing and assembling Please keep away the FPC while assembling or fixing the LCM to avoid FPC being damaged or extruded or other related problems. Please see below picture Caution This Evervision LCD module has been specifically designed for use only in electronic devices in the areas of audio control, office automation,industrial control, home appliances, etc. The modules should not be used in applications where module failure could result in physical harm or loss of life, and Evervision expressly disclaims any and all liability relating in any way to the use of the module in such applications.
27 VGG UFLWG SPEC ONLY Cautions for LCM installation To secure the LCM within customer housing, having appropriate structural support underneath the LCM is a must. The recommended LCM installation with a holder type of the structure into the customer housing is shown below figure. By attaching ONLY the protruding edges of the PCT with cover lens onto the customer housing does not provide a proper structural support required for the LCM. Such construction may deteriorate the adhesivity between the PCT with cover lens and the TFT module, especially after a long period of time or from the vibrations encountered during product transportation.
28 VGG UFLWG SPEC ONLY Outline Drawing
29 VGG UFLWG SPEC ONLY Definition of Labels The bar code nameplate is pasted on each module as illustration, and its definitions are as following explanation. VGG UFLWG ABCDEFGHIJKL (a) Module Name:VGG UFLWG (b) Serial ID: A B C D E F G H I J K L Serial No. Factory Code Manufactured Date Screen Size Serial ID includes the information as below: (a) Screen size (Diagonal): Inch Code (ABCD) (b) Manufactured Date: Year, Month, Day (EFG) Year (E) Year Mark A B C D E F G H I J Year Mark K L M N O P Q R S T
30 VGG UFLWG SPEC ONLY 30 Month (F) Month Jan. Feb. Mar. Apr. May Jun. Jul. Aug. Sep. Oct. Nov. Dec. Mark A B C Day (G) Day Mark A B C D E F G Day Mark H I J K L M N O P Q R S T U V (c) Factory Code (H): For EVERVISION internal use. (d) Serial No. (IJKL): Manufacturing sequence of product, for example: 0001~9999.
31 VGG UFLWG SPEC ONLY Incoming Inspection Standards 18.1 Inspection Parameters 1. Incoming Inspection Both parties agree that the inspection specifications of TFT-LCD Modules (hereinafter known as "Modules") stipulated hereunder is the only and final standard applicable in the process of inspection. EVERVISION shall be under no liability or obligation (including incidental loss, products liability or other consequential loss) whatsoever for any defect in quality or performance or shortage in quantity of the Modules that have passed such inspection. 2. Liability 2.1 Inspection Deadline The Customer should inspect the Modules either at the Delivery Point or within twenty (20) calendar days after arrival at the Delivery Destination. 2.2 Notification of Rejection The Customer may reject one or more defective or non-conforming Modules if the Modules fail to meet the AQL (Acceptable Quality Level) and pass the inspection. In that case, the customer should notify EVERVISION of the rejection by either documents or mail within in three (3) business days from the date of reception of the Modules. Otherwise, the Modules shall be deemed to have met the AQL and passed the inspection. 3. Inspection Specifications Both parties agree that the inspection shall contain and follow the inspection specifications stipulated in the attachment, including: 3.1 Scope 3.2 Sampling Plan 3.3 Panel Inspection Condition 3.4 Display Quality 3.5 Mechanics Specifications 3.6 Notification for Storage Handling 4. Limited Warranty EVERVISION represents and warrants that all Modules shall (i) conform to the specifications set hereunder, and (ii) be free from any defects in material and workmanship for twelve (12) months after the Customer s acceptance or deemed acceptance. EVERVISION will replace, rework or refund the Customer for the defective or non-conforming Modules at EVERVISION s option, provided that the Customer (i) promptly informs EVERVISION of the defects or non-conformities within the warranty period, (ii) complies with the specifications and conditions hereunder, and (iii) complies with EVERVISION s procedure for Modules replacement, reworking and/or return. The warranty period for the Modules replaced or reworked shall be the remaining term for such Modules.
32 VGG UFLWG SPEC ONLY THE WARRANTIES AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, TERMS OR CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ALL OF WHICH ARE EXPRESSLY DISCLAIMED. EVERVISION S WARRANTIES HEREIN APPLY ONLY TO THE CUSTOMER AND ARE NOT TO BE EXTENDED TO ANY THIRD PARTY. 6. Governing Law This Agreement shall be governed and construed in accordance with the laws of the Republic of China. Both parties agree to submit any dispute, which cannot be amicably resolved, to Hsinchu District Court for the first instance.
33 VGG UFLWG SPEC ONLY 33
34 VGG UFLWG SPEC ONLY Bright/Dark Dots: Defect Type Specification Major Minor Bright Dots N 3 Dark Dots N 4 Total Bright and Dark Dots N 6 Items Mura/ Waving/ Hot spot Acceptable count Not visible through 5% ND filter in 50% gray or judge by limit sample if necessary Items Polarizer Dent/Air Bubble Polarizer Scratches Standards D 0.3mm,Ignore 0.3mm<D 0.5mm,N 4 Distance 5mm W 0.07 mm,ignore 0.07<W 0.1 mm L 5.0 mm,n Pixel Definition:
35 VGG UFLWG SPEC ONLY 35
36 VGG UFLWG SPEC ONLY 36 Incoming Inspection Touch Panel
37 VGG UFLWG SPEC ONLY Notification for Storage Handling 6.1 Storage: Enviroment condition must be within the product specifications,otherwise the Module might be damaged Pile of stacking shall follow the instruction of EVERVISION. 6.2 Handling: Twisting or Bending of the Module is prohibited All chemicals are unfit for use unless otherwise instructed by EVERVISION Plugging in & unplugging: The power must be turned off before plugging in or unplugging the Module ESD protection: The Module must not be touched without proper grounding High Voltage: The rear side of Module must not be touched without protection Power sequence: Shall follow the instruction of EVERVISION Handling of LCM (1)Don't give external shock. (2)Don't apply excessive force on the surface. (3)Liquid in LCD is hazardous substance. Must not lick and swallow. when the liquid is attach to your hand, skin, cloth etc. Wash it out thoroughly and immediately. (4)Don't operate it above the absolute maximum rating. (5)Don't disassemble the LCM.
VGG UFLWN SPEC SAMPLE 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG804807-6UFLWN SPEC SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7
More informationVGG TSLWA SPEC ONLY 2. No. Contents Page. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4.
VGG128012-5TSLWA SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationVGG TSLWB SPEC ONLY 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG128012-5TSLWB SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationVGG UFLWB SPEC & SAMPLE 2. No. Contents Page. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4.
VGG322425-6UFLWB SPEC & SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5
More informationVGG UFLWU SPEC SAMPLE 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG644804-6UFLWU SPEC SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7
More informationVGG UFLWH SPEC ONLY 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG804821-6UFLWH SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationVGG UFLWI SPEC ONLY 2. No. Contents Page. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4.
VGG644805-6UFLWI SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationVGG UFLWF SPEC & SAMPLE 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG644804-6UFLWF SPEC & SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5
More informationVGG UFLWA SPEC & SAMPLE 2
VGG322419-6UFLWA SPEC & SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5
More informationPRODUCT SPECIFICATION PT644857E-TLMWD-EMR04
PRODUCT SPECIFICATION Part Number CUSTOMER CUSTOMER PART NUMBER DESCRIPTION 5.7 TFT LCD, Medium Bright, RTP APPROVED BY DATE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions
More informationVGG UFLWD SPEC SAMPLE 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG804812-6UFLWD SPEC SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7
More informationwww.smarterglass.com 978 997 4104 sales@smarterglass.com VGG322404-6UFLWA SPEC SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4
More informationVGG UFLWB SPEC ONLY 2
VGG804813-6UFLWB SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationLIQUID CRYSTAL DISPLAY MODULE
DET080SVNTCMU-1A SPEC ONLY 1 LIQUID CRYSTAL DISPLAY MODULE Product Specification CUSTOMER Standard CUSTOMER PART NUMBER PRODUCT NUMBER DET080SVNTCMI-1A Product Mgr Design Eng Bruno Recaldini Date: 08-March-13
More informationVGG UFLWB SPEC SAMPLE 2
VGG804806-6UFLWB SPEC SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7
More informationVGG1060A5-6UFLWA SPEC ONLY 2. No. Contents Page. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4.
VGG1060A5-6UFLWA SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationVGG UFLWA SPEC & SAMPLE 2. No. Contents Page. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4.
VGG106002-6UFLWA SPEC & SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5
More informationPRODUCT SPECIFICATION PT644857B-TLMWD-EMR04
PRODUCT SPECIFICATION Part Number PT644857B-TLMWD-EMR04 CUSTOMER CUSTOMER PART NUMBER DESCRIPTION 5.7 TFT LCD, Medium Bright, RTP APPROVED BY DATE PT644857B-TLMWD-EMR04 SPEC SAMPLE 2 1. Table of Contents
More informationVGG UFLWE SPEC ONLY 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG322435-6UFLWE SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationVGG6448A4-6UFLWA SPEC & SAMPLE 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG6448A4-6UFLWA SPEC & SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 Record of Revisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5
More informationPRODUCT SPECIFICATION PT804880B -TLMWD-EMR12
PRODUCT SPECIFICATION Part Number PT804880B -TLMWD-EMR12 CUSTOMER CUSTOMER PART NUMBER DESCRIPTION 8.0 TFT LCD, RTP APPROVED BY DATE PT804880B-TLMWD-EMR12 SPEC & SAMPLE 2 1. Table of Contents No. Contents
More informationPRODUCT SPECIFICATION PT644857G-TLMWD-EMR04
PRODUCT SPECIFICATION Part Number PT644857G-TLMWD-EMR04 CUSTOMER CUSTOMER PART NUMBER DESCRIPTION 5.7 TFT LCD, Medium Bright, RTP APPROVED BY DATE PT644857G-TLMWD-EMR04 SPEC & SAMPLE 2 1. Table of Contents
More informationDEM C TTH-PW-N
Display Elektronik GmbH LCD MODULE DEM 320240C TTH-PW-N 3,5 TFT (Low Reflective) Product Specification Ver.: 0 03.12.2010 Version: 0 PAGE: 1 Revise Records Rev. Date Contents Written Approved 0 03.12.2010
More informationDEM A TMH-PW-N
Display Elektronik GmbH LCD MODULE DEM 800600A TMH-PW-N 8,0 TFT Product Specification Ver.: 2 24.11.2010 Version: 2 PAGE: 1 Revise Records Rev. Date Contents Written Approved 0 05.07.2010 Preliminary Specification
More informationCHIMEI INNOLUX DISPLAY CORPORATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT043TN25 V.2 Date: 2010/09/15 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment
More informationThin-Film-Transistor LCD Module Model: GNTS84SNGH1E0
A 2016, Oct. 06 1 / 21 Thin-Film-Transistor LCD Module Acceptance Solomon Goldentek Display Corp. NO. 18 Ta-Yeh St., Ta-Fa Industrial Park,Ta-Liao Hsiang, Kaohsiung Hsien 831, TAIWAN, R.O.C. FAX: 886-7-7886800
More informationINNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT056TN52 Date: 2006/12/18 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment InnoLux
More informationVGG UFLWL SPEC & SAMPLE 2. No. Contents Page. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4.
VGG804808-6UFLWL SPEC & SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 ecord of evisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7
More informationAMP DISPLAY INC. SPECIFICATIONS. 4.3-in COLOR TFT MODULE AM480272QTZQW-00H
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER: CUSTOMER PART NO. AMP DISPLAY PART NO. APPROVED BY: 4.3-in COLOR TFT MODULE AM480272QTZQW-00H DATE: APPROVED FOR SPECIFICATIONS APPROVED FOR SPECIFICATION AND
More informationDEM B TMH-PW-N
Display Elektronik GmbH LCD MODULE DEM 320240B TMH-PW-N (A-TOUCH) 3,5 TFT with Touch-Panel Product Specification Ver.: 1 27.09.2010 Version: 1 PAGE: 1 Revise Records Rev. Date Contents Written Approved
More informationDEM A TMH-PW-N
Display Elektronik GmbH LCD MODULE DEM 800600A TMH-PW-N (A-TOUCH) 8,0 TFT with Touch-Panel Product Specification Ver.: 1 24.11.2010 Version: 1 PAGE: 1 Revise Records Rev. Date Contents Written Approved
More informationINNOLUX. Record of Revision. Version Revise Date Page Content Pre-spec /06/05 Initial Release
InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content Pre-spec.01 2007/06/05 Initial Release Contents: 1.General Specifications...1 2.Pin Assignment...2
More informationVGG UFLWG SPEC ONLY 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG804809-6UFLWG SPEC ONLY 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 ecord of evisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationFORMIKE ELECTRONIC CO.,LTD
FORMIKE ELECTRONIC CO.,LTD PRDUCT SPECIFICATON TFT LCD MODULE MODEL : KWH102QC02-F01 Preliminary Specification Finally Specification CUSTOMER'S APPROVAL SIGNATURE: DATE: APPROVED PM PD PREPARED BY REVIEWD
More informationDSL800480STMQWTA0 LCD-Display 7 TFT Active Matrix with White LED Backlight & Touch Panel
1. Features 7 inch module is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel,
More informationFOR MESSRS : DATE : Oct. 26 th,2017 TECHNICAL DATA TX16D201VM0BAB. Contents
TENTATIVE FOR MESSRS : DATE : Oct. 26 th,2017 TECHNICAL DATA TX16D201VM0BAB Contents No. ITEM No. PAGE 1 COVER 7B64LTD-2567-1 1-1/1 2 RECORD OF REVISION 7B64LTD-2567-1 2-1/1 3 GENERAL DATA 7B64LTD-2567-1
More informationTITLE : HV056WX1-101 Product Specification Rev. P0
PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF HYDIS AND MUST BE RETURNED TO HYDIS UPON ITS REQUEST TITLE : HV056W1-101
More informationProduct Specification. Model: GKTS80SNAG1E0
A 2010, NOV. 24 1 / 19 Thin-Film-Transistor LCD Module Acceptance Solomon Goldentek Display Corp. NO. 18 Ta-Yeh St., Ta-Fa Industrial Park,Ta-Liao Hsiang, Kaohsiung Hsien 831, TAIWAN, R.O.C. FAX: 886-7-7886800
More informationINNOLUX InnoLux copyright 2004 All rights reserved, Copying forbidden. Record of Revision Version Revise Date Page Content Pre-spec /06/05 Init
INNOLUX DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT056TN53 V.1 SPEC NO.: A056-53-TT-13 Date: 2008/06/03 Version: 03 Preliminary Specification Final Specification Remark AT056TN53
More informationTECHNICAL SPECIFICATION MODEL NO : PD104SLL
Version: 2.0 TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact E Ink or its agent for further information. Customer s Confirmation
More informationTECHNICAL SPECIFICATION MODEL NO. : PM070WT2
Version :2.0 TECHNICAL SPECIFICATION MODEL NO. : The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer s Confirmation
More informationSPECIFICATION FOR LCD MODULE MODULE NO: AMC2004A-SPI REVISION NO: 00. Customer s Approval:
SPECIFICATION FOR LCD MODULE MODULE NO: REVISION NO: 00 Customer s Approval: PREPARED BY (RD ENGINEER) CHECKED BY APPROVED BY SIGNATURE DATE DOCUMENT REVISION HISTORY: DATE PAGE DESCRIPTION 2013.2 - First
More informationFOR MESSRS : DATE : May 1 st,2012 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX20D19VM2BAA. Contents
FOR MESSRS : DATE : May 1 st,2012 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX20D19VM2BAA Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX20D19VM2BAA-4 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX20D19VM2BAA-4
More informationSPECIFIC ATION TX16D20VM5BAA 6.2 TFT - HVGA - C-MOS. Note: This specification is subject to change without prior notice
SPECIFIC ATION TX16D20VM5BAA 6.2 TFT - HVGA - C-MOS Version: Date: 08.02.2013 Note: This specification is subject to change without prior notice FOR MESSRS : DATE : Feb. 8 th 2013 CUSTOMER S ACCEPTANCE
More informationMECHANICAL SPECIFICATIONS Specifications Dimensional Outline (typ.) 136.8(W) x 85.9 (H) x 2.95/4.6 (D) mm *)
Toshiba Matsushita Display Technology Co., Ltd. PRODUCT INFORMATION FEATURES (1) 5.6 WIDE-SVGA(1024x600 pixels) display size for mini-notebook PC or UMPC (2) LED Backlight (2 parallel connection) (3) Glare
More informationFOR MESSRS : DATE : Jun. 26 th, 2013 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX14D23VM1BAB. Contents
FOR MESSRS : DATE : Jun. 26 th, 2013 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX14D23VM1BAB Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX14D23VM1BAB-1 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX14D23VM1BAB-1
More informationFOR MESSRS : DATE : Feb. 1 st,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX31D200VM0BAA. Contents
FOR MESSRS : DATE : Feb. 1 st,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX31D200VM0BAA Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX31D200VM0BAA-3 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX31D200VM0BAA-3
More informationINNOLUX DISPLAY CORPORATION
DISPLAY CORPORATION LCD MODULE SPECIFICATION Customer: Model Name: AT050TN22 V.1 Date: 2008/03/10 Version: 01 Preliminary Specification Final Specification For Customer s Acceptance Approved by Comment
More informationRECORD OF REVISION Version Revised Date Page V /11/29 -- First Issued 12/12/2013 Page 2 of 22
DigiWise International Corporation TFT Module Specification MODEL: 13-104GMLB00A0-S < > PRELIMINARY SPECIFICATION < > APPROVAL SPECIFICATION CUSTOMER APPROVED BY DATE: DESIGNED CHECKED APPROVED MICROTIPS
More informationKAOHSIUNG HITACHI ELECTRONICS CO., LTD. CUSTOMER S ACCEPTANCE SPECIFICATION TX20D28VM2BAB. Contents
FOR MESSRS: DATE: Aug. 31 th 2011 CUSTOMER S ACCEPTANCE SPECIFICATION TX20D28VM2BAB Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX20D28VM2BAB-3 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX20D28VM2BAB-3
More informationTITLE : HV104X Product Specification. Rev. O
PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE TFT-LCD SBU AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE TFT- LCD SBU AND MUST BE RETURNED TO BOE TFT-LCD SBU UPON
More informationTECHNICAL SPECIFICATION MODEL NO : PD050QX2
Version :2.0 TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer s Confirmation
More informationCustomer Acceptance Specification. Model : HSD089IFW1 -B00
Document Title HSD089IFW1-B00 CAS for STUDIO Page No. 1/24 TO STUDIO DateDec,26, 2008 Customer Acceptance Specification Model HSD089IFW1 -B00 Accepted by Signature 相關文件 Date Proposed by Technical Service
More informationFOR MESSRS : DATE : Mar. 1 st,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX23D201VM0BAA. Contents
FOR MESSRS : DATE : Mar. 1 st,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX23D201VM0BAA Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX23D201VM0BAA-3 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX23D201VM0BAA-3
More informationAMP DISPLAY INC. SPECIFICATIONS. 4.3-in COLOR TFT MODULE AM480272QTZQW-T00H
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER: CUSTOMER PART NO. AMP DISPLAY PART NO. APPROVED BY: 4.3-in COLOR TFT MODULE AM480272QTZQW-T00H DATE: APPROVED FOR SPECIFICATIONS APPROVED FOR SPECIFICATION AND
More informationTFT-LCD MONITOR. Product Information (Preliminary) MODEL NO. : T043W1D2 v.2
TFT-LCD MONITOR Product Information (Preliminary) MODEL NO. : T043W1D2 v.2 Date : 2008.11.18 Revision : 0.1 Prepared by : Nicolas Hsih Nicolas Shieh, Engineer, Product Development Div. Approved by : Jackey
More informationSUNLIKE DISPLAY. Model No: SC2004C GENERAL SPECIFICATION
GENERAL SPECIFICATION ITEM Product No SC2004CSLB-XA-LB-G DESCRIPTION STN Gray Positive STN Yellow Green Positive STN Blue Negative LCD Type TN Negative TN Positive FSTN Negative White & Black FSTN Positive
More informationE Ink Holdings Inc. PM070WL5 NO. : PM070WL5. Version: 0.1
Version: 0.1 TECHNICAL SPECIFICATION MODEL NO. : The content of this information is subject to be changed without notice. Please contact EIH or its agent for further information Customer s Confirmation
More informationProduct Specification. Rev. Date Contents Written Approved
A June.10.10 1 / 22 Thin-Film-Transistor LCD Module Acceptance Solomon Goldentek Display Corp. NO. 18 Ta-Yeh St., Ta-Fa Industrial Park,Ta-Liao Hsiang, Kaohsiung Hsien 831, TAIWAN, R.O.C. FAX: 886-7-7886800
More informationHannStar Product Information
Document Title HSD070PWW1-B Formal Product information Page No. 1/28 TO Date Sep, 28, 2011 HannStar Product Information (Formal) Model HSD070PWW1 -B01 Note (1) The information contained herein is tentative
More informationAll information is subject to change without notice. Please read bottom notes.
Toshiba Mobile Display Co., Ltd PRODUCT INFORMATION 33.7cm COLOUR TFT-LCD MODULE (13.3 WIDE TYPE) (p-si TFT) All information is subject to change without notice. Please read bottom notes. FEATURES (1)
More informationHannStar Product Specification
Document Title HSD100IFW4-A Formal Specification Page No. 1/23 TO Date May 26, 2011 HannStar Product Specification (Formal) Model HSD100IFW4 -A** Note (1) Please contact HannStar Display Corp. before designing
More informationThin-Film-Transistor LCD Module Model: GNTQ35SNGC1E0
B 2017.Jan.23 1 / 20 Thin-Film-Transistor LCD Module Acceptance Solomon Goldentek Display Corp. NO. 18 Ta-Yeh St., Ta-Fa Industrial Park,Ta-Liao Hsiang, Kaohsiung Hsien 831, TAIWAN, R.O.C. FAX: 886-7-7886800
More informationCustomer Acceptance Specification
Document Title HSD100IFW1 Specification Page No. 1 / 23 TO Date July 15,2010 Customer Acceptance Specification Model HSD100IFW1 -A04 Accepted by Signature 相關文件 IIS DC170-003654 ; DC170-003655 Date Proposed
More informationwww.smarterglass.com 978 997 4104 sales@smarterglass.com LIQUID CRYSTAL DISPLAY DIVISION PRODUCT INFORMATION 26cm COLOUR TFT-LCD MODULE (10.4 TYPE) LTM10C209A (a-si TFT) FEATURES (1) 10.4 VGA color display
More informationDEM C TMH-PW-N (C1-TOUCH)
Display Elektronik GmbH LCD MODULE DEM 320240C TMH-PW-N (C1-TOUCH) Product Specification Ver.:0 06.12.2016 Revise Records Rev. Date Contents Written Approved 0 06.12.2016 Preliminary Specification MH MHO
More informationProduct Specification. Model: GATW70SNAD1ED
A 2012, Jan. 13 1 / 23 Thin-Film-Transistor LCD Module Acceptance Solomon Goldentek Display(DONG GUAN) LTD. 168,Fu Xiang Blvd,Di Yong Industrial Zone, Gao Bu,Dong Guan,Guang Dong 523273,China FAX: +86-769-8873-7947
More informationDEM B TMH-PW-N
Display Elektronik GmbH LCD MODULE DEM 320240B TMH-PW-N 3,5 TFT Product Specification Ver.: 3 16.10.2014 Version: 3 PAGE: 1 Revise Records Rev. Date Contents Written Approved 0 26.04.2010 Preliminary Specification
More informationRECORD OF REVISION. DigiWise International Corporation. Version Revised Date Page Content V /10/16 -- First Issued. 10/16/2015 Page 2 of 25
International Corporation TFT Module Specification MODEL: 13-080SMTBIAA0-S PRELIMINARY SPECIFICATION APPROVAL SPECIFICATION CUSTOMER APPROVED BY DATE: DESIGNED CHECKED APPROVED International Corporation
More informationDLC Display Co., Limited 德爾西顯示器有限公司
DLC Display Co., Limited 德爾西顯示器有限公司 MODEL No: DLC1560CZL TEL: 86-755-86029824 FAX: 86-755-86029827 E-MAIL: sales@dlcdisplay.com WEB: www.dlcdisplay.com . Record of Revision Date Revision No. Summary 2017-04-20
More informationTFT-LCD MONITOR. Product Information. MODEL NO. : T170E1D1 v.1
TFT-LCD MONITOR Product Information MODEL NO. : T170E1D1 v.1 Date : 2009.03.23 Revision 2.2 Prepared by : Jackey Chen Jackey Chen,Senior Engineer, Product Development Div. Approved by : Kelvin Hsieh Kelvin
More informationAll information is subject to change without notice. Please read bottom notes. MECHANICAL SPECIFICATIONS Specifications
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION 26cm COLOUR TFT-LCD MODULE (10.4 TYPE) LTA104A261F (a-si TFT) All information is subject to change without notice. Please read bottom
More informationTECHNICAL SPECIFICATION MODEL NO : PD050VL1
Version :2.0 TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer s Confirmation
More informationHannStar Product Specification
Document Title HSD070PFW3-A Preliminary Specification Page No. 1/25 TO : Date : May 03, 2011 HannStar Product Specification (Preliminary) Model: HSD070PFW3 -A00 Note: 1. The information contained herein
More informationTFT Display Data Sheet. Model: PD050SX1. Anfrage an Atlantik Elektronik
TFT Display Data Sheet Model: Anfrage an Atlantik Elektronik Atlantik Elektronik GmbH, Fraunhoferstr.11a, D-82152 Planegg/Munich, Phone: +49 89 89 505-0, Fax.: +49 89 89 505-100, www.atlantikelektronik.com
More informationTECHNICAL SPECIFICATION MODEL NO : PD104SLG
Version: 3.0 TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact E Ink or its agent for further information. Customer s Confirmation
More informationLIQUID CRYSTAL DISPLAY MODULE
DET035QVNTCMI-1W SPEC ONLY 1 LIQUID CYSTAL DISPLAY MODULE Product Specification CUSTOME Standard CUSTOME PAT NUMBE PODUCT NUMBE DET035QVNTCMI-1W Product Mgr Design Eng Bruno ecaldini Date: 13-May-13 Luo
More informationDisplay Colors. Outline Dimension. Recommended Driving Condition for Back Light Specifications Min. Typ. Max.
640 x 480 Pixels LCD Color Monitor The is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable
More informationAll information is subject to change without notice. Please read bottom notes.
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION FEATURES(1)10. VGA color display with High Luminance (00cd/m 2 ) (Wide Viewing Angle (Vertical120, Horizontal10) (3)Built in Long Life
More informationSPECIFIC ATION TX26D200VM2BAB 10.4 TFT - SVGA - LVDS. Note: This specification is subject to change without prior notice
SPECIFIC ATION TX26D200VM2BAB 10.4 TFT - SVGA - LVDS Version: Date: 07.08.2014 Note: This specification is subject to change without prior notice www.data-modul.com FOR MESSRS : DATE : Aug. 7 th,2014 CUSTOMER
More informationAll information is subject to change without notice. Please read bottom notes.
Toshiba Matsushita Display Technology Co., Ltd PRODUCT INFORMATION 21cm COLOR TFT-LCD MODULE (8.4 TYPE) LTM08C351 (p-si TFT) All information is subject to change without notice. Please read bottom notes.
More informationVGG UFLWC SPEC SAMPLE 2. 1 Table of Contents 2. 2 Record of Revisions 3. 3 Module Numbering System 4. 4 Application 5.
VGG804818-6UFLWC SPEC SAMPLE 2 1. Table of Contents No. Contents Page 1 Table of Contents 2 2 ecord of evisions 3 3 Module Numbering System 4 4 Application 5 5 Features 5 6 General Specifications 5 7 Absolute
More informationMODEL NO. : PD104VT1
Version : 1.9 TECHNICAL SPECIFICATION MODEL NO. : The information contained herein is the exclusive property of Prime View International Co., and shall not be Page:1 TECHNICAL SPECIFICATION CONTENTS NO.
More informationSPECIFIC ATION TX14D26VM1BAA 5.7 TFT - QVGA - C-MOS. Note: This specification is subject to change without prior notice
SPECIFIC ATION TX14D26VM1BAA 5.7 TFT - QVGA - C-MOS Version: Date: 19.07.2013 Note: This specification is subject to change without prior notice www.data-modul.com FOR MESSRS : DATE : Jul. 19 th,2013 CUSTOMER
More informationTITLE : HV121X Product Specification. Rev. A
PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST TITLE
More informationKTBCD430-D1. Product. Bi-stable Cholesteric Display Module 128 x 64 Dots Matrix Build In Voltage Booster
PAGE 1 OF 15 KTBCD430-D1 Product Bi-stable Cholesteric Display Module 128 x 64 Dots Matrix Build In Voltage Booster Kentec Electronics (Displays) Limited URL: http://www.kentec.com.hk E-mail: t.liang@kentec.com.hk;
More informationSPECIFICATIONS FOR LCD MODULE
A M P I R E SPECIFICATIONS FOR LCD MODULE CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. AM-640480GTMQW-T00H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample APPROVED BY CHECKED
More informationFOR MESSRS : DATE : Feb. 1 st,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX17D200VM0BAA. Contents
FOR MESSRS : DATE : Feb. 1 st,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX17D200VM0BAA Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX17D200VM0BAA-3 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX17D200VM0BAA-3
More informationAMP DISPLAY INC. SPECIFICATIONS AMP DISPLAY INC 9856 SIXTH STREET RANCHO CUCAMONGA CA TEL: FAX:
AMP DISPLAY INC. SPECIFICATIONS CUSTOMER CUSTOMER PART NO. AMP PART NO. AM-480272Q1TZQW-T01H APPROVED BY DATE Approved For Specifications Approved For Specifications & Sample AMP DISPLAY INC 9856 SIXTH
More informationT E C HNIC AL S P E C IF IC AT ION MODE L NO. : P D057V U5
V ersion : 4.0 P D057V U5 T E C HNIC AL S P E C IF IC AT ION MODE L NO. : P D057V U5 T he content of this information is subject to be changed without notice. P lease contact P V I or its agent for further
More informationFOR MESSRS : DATE : Jul. 12 th,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX26D200VM5BPA. Contents
FOR MESSRS : DATE : Jul. 12 th,2017 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX26D200VM5BPA Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX26D200VM5BPA-4 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX26D200VM5BPA-4
More informationCHARACTER TYPE LCD MODULE PVC160101PTN03 PRODUCT SPECIFICATIONS
CHARACTER TYPE LCD MODULE PVC160101PTN03 PRODUCT SPECIFICATIONS CAUTION The product described by these specifications is designed to be used with ordinary electronic equipment or devices, such as audio/video
More informationLIQUID CRYSTAL DISPLAY MODULE. Product Specification. INTERNAL APPROVALS Product Mgr Doc. Control Electr. Eng. Bruno. Recaldini
DENSITON 1/42 DSN70100 LIQUID CYSTAL DISPLAY MODULE Product Specification CUSTOME Standard PODUCT NUMBE DSN70100 CUSTOME APPOVAL Date INTENAL APPOVALS Product Mgr Doc. Control Electr. Eng Bruno ecaldini
More informationTECHNICAL SPECIFICATION MODEL NO : PD104SLA
Version : 1.0 TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer s Confirmation
More informationSpecification LW514. Drawn Approval Approval. Rev. 02 December 서식번호 : SSC-QP (Rev.00)
Specification LW514 SSC CUSTOMER Drawn Approval Approval CONTENTS 1. Full code of Lamp LED series 2. Feature & Application 3. Absolute Maximum Ratings 4. Electro Characteristics 5. Outline Dimension 6.
More informationFOR MESSRS : DATE :Aug. 27 th,2012 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX31D37VM0CAA. Contents
FOR MESSRS : DATE :Aug. 27 th,2012 CUSTOMER S ACCEPTANCE SPECIFICATIONS TX31D37VM0CAA Contents No. ITEM No. PAGE 1 COVER 7B64PS 2701-TX31D37VM0CAA-3 1-1/1 2 RECORD OF REVISION 7B64PS 2702-TX31D37VM0CAA-3
More informationTECHNICAL SPECIFICATION MODEL NO : PD104SLF
Version : 1.0 P-511-509(V:1) TECHNICAL SPECIFICATION MODEL NO : The content of this information is subject to be changed without notice. Please contact PVI or its agent for further information. Customer
More information