TITLE : HV121X Product Specification. Rev. A

Size: px

Start display at page:

Download "TITLE : HV121X Product Specification. Rev. A"

Alberta Tyler
5 years ago
Views:

1 PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST TITLE : HV Product Specification Rev. A FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA BOE HYDIS TECHNOLOGY SPEC. NUMBER TFT-LCD PRODUCTS. A OF 23 B2005-C001-A(1/3) A4( )

2 TFT-LCD PRODUCT A ISION HISTORY. ECN NO. DESCRIPTION OF CHANGES DATE PREPARED O Initial Release J.K.HAN A C/F gamut is changed..before : 45 %. After : 40% S.W.KANG SPEC. NUMBER SPEC. TITLE HV Product Specification 2 OF 27 B2005-C001-A(2/3) A4( )

3 CONTENS NO. ITEM 1.0 General Description Absolute Maximum ratings Optical specifications Electrical specifications Interface Connection Signal Timing Specification Signal Timing waveforms of interface signal (DE mode) Input Signals, Display Colors & Gray Scale of Colors Power Sequence Reliability test Handling & cautions Appendix 18 HV Product Specification 3 OF 23

4 1.0 GENERAL DESCRIPTION 1.1 Introduction HV is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as active switching devices. This module has a 12.1 inch diagonally measured active area with GA resolutions (1024 horizontal by 768 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is a low reflection and higher color type. Con nnector (CN 1 ) LVDS Input Signal VDD LVDS Rx + T/CON DC/DC Gamma Vcom Gate Driver Source Driver TFT LCD Panel Features : without B/L 1Ch LVDS Interface with 1 pixel / clock 6-bit color depth, Display 262,144 colors Low reflection and wide viewing angle DE (Data Enable) mode only SLG (Single Level Gate) function use RoHS Product Glare polarizer High Reliability (High temperature operation enable) 1.3 Application ATM / Car / Avionics SPEC. NUMBER SPEC. TITLE HV Product Specification 4 OF 23

5 1.3 General Specifications Parameter Specification Unit Remark Active area (H) (V) mm Number of pixels 1024(H) 768(V) pixels Pixel pitch 0.24(H) 0.24(V) mm Pixel arrangement RGB Vertical stripe - Display mode Normally Black (FFS) - Surface treatment Anti-Reflective (No Haze) - Liquid Crystal clearing temperature 103 Color filter Chromaticity x=0.312, y=0.342 CF Color Gamut 40 % Panel Transmittance 5.91 (excluding the gain of the rear-polarizer) % Note. 1 Note 1) The Panel Transmittance as described above, will be obtained after electronics and back-light driving circuit are optimized to a panel. HV Product Specification 5 OF 23

6 2.0 ABSOLUTE MAIMUM RATINGS The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. PARAMETER SYMBOL MIN. MA. UNIT REMARK Logic Power Supply V DD VSS V Ta = 25 ±2 Logic Input Voltage V IN VSS-0.3 V DD +0.3 V Operating Temperature T OP Note 1 Note 1) T-CON, D-IC, Polarizer are excluded within the range of guarantee for Operating Temperature. HV Product Specification 6 OF 23

7 3.0 OPTICAL SPECIFICATION The test of Optical specifications shall be measured in a dark room (ambient luminance 1 lux and temperature = 25±2 ) with the equipment of Luminance meter system (Goniometer system and TOPCONE BM-5) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of θ and Φ equal to 0. We refer to θ Ø=0 (=θ 3 ) as the 3 o clock direction (the right ), θ Ø=90 (= θ 12 ) as the 12 o clock direction ( upward ), θ Ø=180 (= θ 9 ) as the 9 o clock direction ( left ) and θ Ø=270 (= θ 6 ) as the 6 o clock direction ( bottom ). While scanning θand/or Ø, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to measurement... VDD shall be 3.3+/- 0.3V at 25 C. Optimum viewing angle direction is 6 o clock. Parameter Symbol Condition Min. Typ. Max. Unit Remarks Viewing Angle range Horizontal Vertical Θ Deg. Θ Deg. CR > 10 Θ Deg. Θ Deg. Note 1 Luminance Contrast ratio CR Θ = Note 2 Color reproduction Θ = % Response Time Total (T r +T d ) Ta= 45 C Θ = ms Note 3 Cross Talk CT Θ = % Note 4 HV Product Specification 7 OF 23

8 Note : 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal or 3, 9 o clock direction and the vertical or 6, 12 o clock direction with respect to the optical axis which is normal to the LCD surface (see FIGURE 1 shown in Appendix). 2. Contrast measurements shall be made at viewing angle of Θ= 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state. (See FIGURE 1 shown in Appendix) Luminance Contrast Ratio (CR) is defined mathematically. CR = Luminance when displaying i a white raster Luminance when displaying a black raster 3. The electro-optical response time measurements shall be made as FIGURE 3 shown in Appendix by switching the data input signal OFF and ON. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td. (See FIGURE 2 shown in Appendix). 4. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark. (See FIGURE 3 shown in Appendix). HV Product Specification 8 OF 23

9 4.0 ELECTRICAL SPECIFICATIONS [Ta = 25±2 ] Parameter Min Typ Max Unit Remark Power Supply Voltage V DD V Power Supply Current I DD ma Note1 Power consumption P D W Permissible Input Ripple Voltage V RF mv V DD = 3.3V3V High Level Differential Input Threshold Voltage Low Level Differential Input Threshold Voltage V IH mv V IL mv Vcm = 1.2V typ. Notes : 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25. a) Typ. : Vertical color bar Pattern b) Max. : Gray 28@Vertical 2 Skip HV Product Specification 9 OF 23

10 5.0 INTERFACE CONNECTION. 51El 5.1 Electrical ti linterface Connection CN1 Interface connector DF19L-20P-1H (HIROSE) or equivalent User side connector DF19G-20S-1C (HIROSE) or equivalent Pin No Symbol Function Remark 1 VDD1 Power Supply: +3.3V3V 2 VDD2 Power Supply: +3.3V 3 VSS Ground 4 VSS Ground 5 RIN0- LVDS Negative data signal (-) 6 RIN0+ LVDS Positive data signal (+) 7 VSS Ground R0,R1,R2,R3,R4,R5,G0 8 RIN1- LVDS Negative data signal (-) 9 RIN1+ LVDS Positive data signal (+) G1,G2,G3,G4,G5,B0,B1 10 VSS Ground 11 RIN2- LVDS Negative data signal (-) B2,B3,B4,B5, 12 RIN2+ LVDS Positive data signal (+) 13 VSS Ground 14 RCLKIN- LVDS Negative clock signal (-) 15 RCLKIN+ LVDS Positive clock signal (+) 16 VSS Ground 17 NC No Connection 18 NC No Connection 19 VSS Ground 20 VSS Ground Hsync, Vsync, DE HV Product Specification 10 OF 23

11 6.0. SIGNAL TIMING SPECIFICATIONS 6.1. The HV is operated by the only DE(Data enable) mode (LVDS Transmitter Input) Item Symbols Min Typ Max Unit Frequency 1/Tc MHz High Time Tch ns Low Time Tcl ns Setup Time Tds ns Hold Time Tdh ns Data Enable Setup Time Tes ns Frame Period Tv lines Vertical Display Period Tvd lines One Line Scanning Period Th clocks Horizontal Display Period Thd clocks 6.2. LVDS data mapping HV Product Specification 11 OF 23

12 6.3. LVDS Rx interface timing parameter The specification of the LVDS Rx interface timing parameter <LVDS Rx Interface Timing Specification> Item Symbol Min Typ Max Unit Remark CLKIN Period trcip nsec Input Data 0 trip nsec Input Data 1 trip1 tricp/7-0.4 tricp/7 tricp/7+0.4 nsec Input Data 2 trip2 2 tricp/ tricp/7 2 tricp/7+0.4 nsec Input Data 3 trip3 3 tricp/ tricp/7 3 tricp/7+0.4 nsec Input Data 4 trip4 4 tricp/ tricp/7 4 tricp/7+0.4 nsec Input Data 5 trip5 5 tricp/ tricp/7 5 tricp/7+0.4 nsec Input Data 6 trip6 6 tricp/ tricp/7 6 tricp/7+0.4 nsec trip6 trip5 trip4 trip3 trip2 trip1 trip0 RxINz +/- * Z = 0, 1, 2 Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx RxCLKIN+/- Vdiff=0[v] trcip Vdiff=0[v] * Vdiff = (RINz+)-(RINz-), (RCLKIN+)-(RCLKIN-) HV Product Specification 12 OF 23

13 7.0 SIGNAL TIMING WAVEFORMS OF INTERFACE SIGNAL (DE MODE) Timing Waveforms of Interface Signal Tvd Tv MCLK Th ENAB R7 ~ R0 G7 ~ G0 B7 ~ B0 Invalid Data x,1 x,2 x,y x,768 Invalid Data x+1,1 7.2 Horizontal timing Waveforms Thd Th MCLK Tc ENAB RA7 ~RA0 GA7 ~GA0 BA7 ~BA0 D1 D2 Dn D1022 D1023 D1024 Invalid Data D1 D2 D3 Tch Tcl MCLK 1.5V 2.0V 0.8V Tds Tdh Data Valid Data 2.0V 0.8V Tes ENAB 2.0V HV Product Specification 13 OF 23

14 8.0 INPUT SIGNALS, BASIC DISPLAY COLORS & GRAY SCALE OF COLORS Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data. Colors & Gray Red Data Green Data Blue Data Scale R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Black Blue Green Basic Cyan Colors Red Magenta Yellow White Gray Scale Of Red Gray Scale Of Green Gray Scale Of Blue Gray Scale Of White & Black SPEC. NUMBER Black Darker Brighter Red Black Darker Brighter Green Black Darker Brighter Blue Black Darker Brighter White SPEC. TITLE HV Product Specification 14 OF 23

15 9.0 POWER SEQUENCE To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below Power Supply 0V 0.9VDD 0.1VDD T1 0.9VDD 0.1VDD T2 T5 T6 Interface Signal 0 Valid T3 T4 Back- light 0 0 < T1 10 ms 0 < T2 50 ms 100 ms T3, T4 0 < T5 50 ms 1 sec < T6 Notes: 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. HV Product Specification 15 OF 23

16 10.0 RELIABLITY TEST 10.1 BOE HYDIS Test condition The following test is performed for the HV module with HT BLU. No Test Items Conditions 1 High temperature storage test Ta = 60 C, 240 hrs 2 Low temperature storage test Ta = -20 C, 240 hrs 3 High temperature & high humidity operation test Ta = 50 C, 80 %RH, 240 hrs 4 High temperature operation test Ta = 50 C, 240 hrs 5 Low temperature operation test Ta = 0 C, 240 hrs 6 Thermal shock Ta = -20 C 60 C (30 min), 100 cycle 7 Vibration test (non-operating) Frequency Gravity/AMP Period : 10 ~ 300 Hz :1.5G :,Y,Z30min 8 Shock test (non-operating) Gravity Pulse width : 150G :6ms,halfsinewave ±, ±Y, ±Z Once for each direction *As Guarantee Range of Specific part (Pol. / D-IC / LC), BOEHYDIS have responsibility within this Range of these parts. HV Product Specification 16 OF 23

17 11.0 HANDLING & CAUTIONS 11.1 Cautions when taking out the module Pick the pouch only, when taking out module from a shipping package Cautions for handling the module As the electrostatic discharges may break the LCD module, handle the LCD module with care. Peel a protection sheet off from the LCD panel surface as slowly as possible. As the LCD panel and backlight element are made from fragile glass material, impulse and pressure to the LCD module should be avoided. As the surface of the polarizer is very soft and easily scratched, use a soft dry cloth without chemicals for cleaning. Do not pull the interface connector in or out while the LCD module is operating. Put the module display side down on a flat horizontal plane. Handle connectors and cables with care Cautions for the operation When the module is operating, do not lose MCLK, DE signals. If any one of these signals were lost, the LCD panel would be damaged. Obey the supply voltage sequence. If wrong sequence were applied, the module would be damaged Cautions for the atmosphere Dewdrop atmosphere should be avoided. d Do not store and/or operate the LCD module in a high temperature and/or humidity atmosphere. Storage in an electro-conductive polymer-packing pouch and under relatively low temperature atmosphere is recommended Cautions for the module characteristics Do not apply fixed pattern data signal to the LCD module at product aging. Applying fixed pattern for a long time may cause image sticking Other cautions Do not disassemble and/or re-assemble LCD module. Do not re-adjust variable resistor or switch etc. When returning the module for repair or etc, please pack the module not to be broken. We recommend using the original shipping packages. HV Product Specification 17 OF 23

18 12.0 APPENDI Figure 1. Measurement Set Up Figure 2. Response Time Testing TFT Off (Black) TFT On (White) TFT Off (Black) Tr 100% 90% Td 10% 0% Time HV Product Specification 18 OF 23

19 Figure 3. Cross Modulation Test Description i VIEW AREA VIEW AREA 256, , , ,576 YA (896, 384) YB (896,384) YB - YA Cross-Talk = 100 YA Where: Y A = Initial luminance of measured area (cd/m 2 ) Y B = Subsequent luminance of measured area (cd/m 2 ) The location measured will be exactly the same in both patterns. HV Product Specification 19 OF 23

20 Figure 4. PACKING DESCRIPTION Notes Box Dimension: 333mm(W) 333mm(D) 435mm(H) Package Quantity in one Box: 15pcs HV Product Specification 20 OF 23

21 Figure 5. Product serial Number HV BOE HYDIS Barcode No 1. Control Number No 2. Rank / Grade No 3. Line Classification (BOE HYDIS : H, LCM : L, BOE OT : A/B/C) No 5. Month (1, 2, 3,, 9,, Y, Z) No 6. FG Code No 7. Serial Number No 4. Year (5 : 2005, 6 : 2006, ) HV Product Specification 21 OF 23

: Box Serial No. See next figure for detail description.

22 Figure 6. Box Label Label Size: 108 mm (L) 56 mm (W) Contents Model: Q`ty: Module Q`ty in one box Serial No.: Box Serial No. See next figure for detail description. Date: Packing Date FG Code: FG Code of Product HV * * Type Grade Year Month ITEM-CODE Serial_no FG CODE RoHS Mark 14.2 Mercury disposal & High voltage caution HV Product Specification 22 OF 23

23 Figure 7. TFT-LCD Panel Outline Dimension (Front View) HV Product Specification 23 OF 23

TITLE : HV104X Product Specification. Rev. O

TITLE : HV104X Product Specification. Rev. O PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE TFT-LCD SBU AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE TFT- LCD SBU AND MUST BE RETURNED TO BOE TFT-LCD SBU UPON