SPECIFICATIONS FOR APPROVAL

Transcription

1 CUSTOM :. No. :. DIT : (1/12) DAT : 26/6/1 SPCIFICATIONS FO APPOVAL PODUCT : 3528 SIZ WHIT WLP LD (TOP VIW) MODL NAM : ADLSM3528CAACC1L1 (CUSTOM P/N : ) CHKD. APPOVAL APPD. VISION MAK ADL = ADIVA LD SM = SMD = COLO (WHIT) 3528 = SIZ CAAC = COOL WHIT C1 = 11 DG VIWING ANGL L1 = INTNAL NUMB DGND. CHKD. APPD. ADIVA TCHNOLOGY INC.

2 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 2 / 12 CONTNTS 1. Features 3 / Outline dimensions 3 / Applications 4 / Absolute Maximum atings 4 / lectrooptical characteristics 4 / ank Sorting Method 5 / Typical Characteristic Curves 7 / eliability Test Items and Conditions 8~9 / Package and Marking of Products Cautions on use 11/ Others 12/ 12 ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

3 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 3 / Features quivalent to 3528 Package Outline,.4 mm Thickness Slim Type SMD Silicon ChipCarrier (SiCC), Thermal Conductive Silicon Frame PKG Wafer Level Package (WLP) type : mm (L W H) High Luminous Intensity (I V ) / Luminous Flux ( V ): 7 cd / 17 1mA 17 cd / 4 35mA Compatible to Pbfree I reflow soldering SDwithstand voltage : up to 2kV acc. to JSD22A 114B 2. Outline Dimensions ( Unit : mm ) silicon cathode mark.4.1 Body ncapsulant.5.1 Materials silicon silicone resin electrode Polarity ecommended Solder Pad (I eflow Soldering) Cathode Anode xposed Cu for soldering Observe the recommended guideline by all means. Soldering metal mask pattern Observe the recommended guideline by all means Cu area for improving heat dissipation Do not use this area for electrical contact. Cu area 16 mm 2 per pad ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

4 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 4 / Applications Mobile Phone Camera Flash Backlighting Interior and xterior Illumination, Automotive Lighting 4. Absolute Maximum atings Items Symbols atings *1) *2) Forward Current I F 15 5 (ma) Pulse Forward Current I *3) Fp 1 *4) 75 (ma) Power Dissipation P D 57 2 (mw) everse Voltage V 5 5 ( V ) Operating Temperature T opr 4 ~ +1 4 ~ +1 ( ) Storage Temperature T stg 4 ~ +1 4 ~ +1 ( ) Thermal esistance thja 18 4 *1) *2) *1) thja results from mounting on PC board F 4 (pad size 16 mm 2 per pad) *2) thja results from mounting on Metal Core PC (board size 1 inch 2 ) thjc ~ 9.8 K/W *3) Pulse Width 1us, Duty 1% *4) Pulse Width 1ms, Duty 1% ( Ta=25 ) Unit (K/W) Junction Temperature T j 12 ( ) 5. lectro Optical Characteristics ( Ta=25 ) Items Symbol Condition Min Typ Max Unit CTQ Forward Voltage V F I F =15[mA] I F =35[mA] V CTP Luminous Intensity *5) I V I F =15[mA] I F =35[mA] cd CTP Luminous Flux *5) V I F =15[mA] I F =35[mA] lm CTP CI Value X / Y I F =15[mA] efer to 6. ank Sorting Method' Viewing Angle 2 1/2 I F =15[mA] 11 deg *5) color coordinate condition : x =.31, y =.31 These values measured by Optical Spectrum Analyzer of Adiva Tech and tolerances are followings as below Luminous Intensity(Iv) : 2%, Forward Voltage(V F ) :.1, CI Value :.1 ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

5 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 5 / ank Sorting Method Luminous Intensity, CI Value, Forward Voltage ank ank CI Typical CCT(K) V F Bin A rank (.294/.263 ) (.286 /.278 ) (.37/.313 ) (.311 /.292 ) ~ ~ ~ 3.65 K/L/M A1 K/L/M A2 K/L/M A3 B rank (.286/.278 ) (.278 /.295 ) (.33/.333 ) (.37 /.313 ) ~ ~ ~ 3.65 K/L/M B1 K/L/M B2 K/L/M B3 C rank (.311/.292 ) (.37 /.313 ) (.33/.347 ) (.33 /.32 ) ~ ~ ~ 3.65 K/L/M C1 K/L/M C2 K/L/M C3 K rank : 25 ~ 35 L rank : 35 ~ 45 M rank : 45 ~ D rank (.37/.313 ) (.33 /.333 ) (.33/.373 ) (.33 /.347 ) ~ ~ ~ 3.65 K/L/M D1 K/L/M D2 K/L/M D3 rank (.33/.32 ) (.33 /.347 ) (.348/.374 ) (.344 /.342 ) ~ ~ ~ 3.65 K/L/M 1 K/L/M 2 K/L/M 3 F rank (.33/.347 ) (.33 /.373 ) (.35/.388 ) (.348 /.374 ) ~ ~ ~ 3.65 K/L/M F1 K/L/M F2 K/L/M F3 G rank (.35/.388 ) (.367 /.4 ) (.362/.372 ) (.344 /.342 ) ~ ~ ~ 3.65 K/L/M G1 K/L/M G2 K/L/M G3 * Voltages are tested at a current pulse duration of 1 ms and an accuracy of 5.%. * This categories are established for classification of products. * V F, I V values are based on 1die performance. MODL NAM ADLSM3528CAACC1L1

6 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 6 / 12 Luminous Intensity, CI Value, Forward Voltage ank CI Y K B 7K A D C 57K F 5K G 45K CI X * Chromaticity coordinate groups are tested at a current pulse duration of 1 ms and a tolerance of.1. ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

7 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 7 / Typical Characteristic Curves Forward Voltage vs. Forward Current Forward Current vs. Luminous Intensity Forward Current (ma) 5 Ta elative Luminous Intensity (a.u.) Ta 25 thja = 4 K/W thja = 18 K/W Forward Voltage (V) Forward Current (ma) Forward Current vs. Luminous Flux Spectrum elative Luminous Flux (a.u.) 3. thja = 4 K/W Ta thja = 18 K/W Intensity (a.u.) Ta 25 I F = 35mA Forward Current (ma) Wavelength (nm) adiation Characteristics Max. Permissible Forward Current FWHM elative Luminous Intensity Ta 25, I F = 15mA Max. Forward Curent (ma) thjc ~ 9.8 K/W thja = 2 K/W 3 K/W 4 K/W 5 K/W 8 K/W 18 K/W Ambient Temperature ( ) ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

8 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 8 / eliability Test Items and Conditions 81. Items and esults of eliability Test No Item Test Condition Test Hours/ Cycles Sample No Ac/e 1 Steady State Operating Life *1) Ta 25, I F =4 ma (tested with Adiva Tech std. circuit board *2) ) 1hr 2 High Temp. Humidity Life *1) Ta 6, 9% H, I F =3mA (tested with Adiva Tech std. circuit board *2) ) 5hr 3 Steady State Operating Life of High Temperature *1) Ta 85, I F =12mA (tested with Adiva Tech std. circuit board *2) ) 1hr 4 Steady State Operating Life of Low Temperature *1) Ta 3, I F =35 ma (tested with Adiva Tech std. circuit board *2) ) 1hr 5 High Temp. Storage 1 1hr 6 Low Temp. Storage 4 1hr 7 Temperature Cycle 4 (3min) ~ 25 (5min) ~ 1 (3min) ~ 25 (5min) 1cycle 8 Thermal Shock 1 (15min) ~ 4 (15min) 1cycle 9 esistance to Soldering Heat Tsld = 26, 1sec (pre treat. 3, 7%, 168hr) 2 times 1 Vibration 2m/s 2,1~2Hz(sweep 4min) 48min, 3 directions 4 times 11 lectrostatic Discharge =1.5k, C=1pF, Test Voltage 2kV 3times Negative/ Positive *1) these test items are jugged by the criteria of Luminous Intensity II. *2) thermal resistance THJA ~ 5 K/W 82. Criteria for Judging the Damage (U.S.L : Upper Spec. Limit, S : Initial Value) Item Symbol Test Condition Min. Limit Max. Forward Voltage V F I F = 35mA U.S.L. 1.2 Luminous Intensity I P O I F = 35mA S.7 Luminous Intensity II P O I F = 35mA S.5 ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

9 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 9 / eliability Data Long Term eliability Data T, 4mA, THJC 9.8K/W, THJA 5K/W (Adiva Tech standard circuit board) Assumed Tj ~ at 1hr, ave. flux ~ 2.6% N 22 Flux (%) Time (hour) ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

10 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) Package and Marking of Products 91. Taping Outline Dimension Dimension of eel ( Unit : mm ) LABL A Packing Materials : eel : Conductive PS (black) mboss Tape : Conductive PS (black) Cover Tap : Conductive PT base Dimension of Tape.5.1 Cathode Anode Arrangement of Tape (nd) (Start) More than 4mm unloaded tape Mounted with LD (2,ea) More than 4mm unloaded tape 15 ~ 38mm Leading part ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

11 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 11 / Cautions on use 11. Overcurrentproof Customer must apply resistors for protection, others slight voltage shift will cause big current change ( Burn out will happen ). 12. For the Storage Proper temperature and H conditions for storage are : 5 ~35, H 6%. Do not open moistureproof bag before the products are ready to use. Store products in a moistureproof bag with a desiccant(silica gel) after open. These products should be used within 168 hours after opening the bag based upon storage condition. These products must be baked to remove moisture before using them if the Silica gel loses its blue color. Conditions for baking are 6 5, 2% (H) and 24 hours maximum. (For reeled status without bag) Considering the tape life, we suggest our customers to use our products within a year(from production date) 13. Soldering Status According to recommended solder pad rules, Customer must observe the recommended guidelines by all means, especially soldering metal mask pattern, exposed Cu for soldering, etc. Check the below status, if you followed the recommended solder pad rules. This device should not be used in any type of fluid such as water, oil, organic solvent etc, When Washing is required, IPA should be used. ( OK ) ( NG ) 14. Adiva Tech will not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user s unit if use to exceed the absolute maximum ratings, or not keep the matters that demand special attention. ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1

12 TITL : 3528 SIZ WHIT WLP LD (TOP VIW) 12 / Others 111. Lead Solder SMD Surface Temp ( ) Prehe at ising +4 /sec 24 Max Cooling 5 /sec within 6 sec. Above2 6~12 sec 1 sec. Max Soldering Time 112. Lead Free Solder SMD Surface Temp ( ) Prehe at ising +4 /sec 26 Max Cooling 5 /sec within 6 sec. Above22 6~12 sec 1 sec. Max Soldering Time 113. Soldering Iron Basic spec is 3sec when 35. If temperature is higher, time shorter (+1 1sec). Power dissipation of Iron should be smaller than 15W, and temperature should be controllable. Surface temperature of the device should be under 23. ADIVA TCHNOLOGY INC. MODL NAM ADLSM3528CAACC1L1