Condensation Risk Analysis
|
|
|
- Cornelius Todd
- 6 years ago
- Views:
Transcription
1 Ref No Client Website Mr Mark Sheehan Address New Dwelling 39 The Old Common Chalford Stroud Condensation Risk Analysis Mark Sheehan Building Consultancy Limited R egistered in England No
2 Leinster Square SAP Modelling Planning Submission Condensation Risk Analysis Report ge 1 of 10 Property Reference: MSBC Website Survey Reference: 001 Issue 1 Prop Type Ref: Project: 39, The Old Common, Chalford, STROUD, Gloucestershire, GL6 8HH SAP Rating: 80 C Environmental:82 B CO2 Emissions (t/year): 0.98 General Requirements Compliance: ss DER: ss DFEE: TER: TFEE: Issued on Date: 24.Jul.2014 Percentage DER<TER: Percentage DFEE<TFEE: CfSH Results Version: ENE1 Credits: N/A ENE2 Credits: N/A ENE7 Credits: N/A CfSH Level: N/A Surveyor: Mark Sheehan, Tel: Surveyor ID: A Address: Chalford, Stroud, Gloucestershire, GL6 8HH Client: Dan Stewart Software Version: Elmhurst Energy Systems SAP2012 Calculator (Design System) version 1.02r36 SAP version:, Regs Region: England (rt L1A 2013), Calculation Type: New Dwelling As Designed Roof - Sloping Ceilings Environmental conditions: External conditions: Temperature: 5 C Relative Humidity: 95 % Internal conditions: Temperature: 15 C Relative Humidity: 65 % Table of layers: Layer Thickness mm conduct. W/m.K thermal resistivity vapourt External surface Tiles, clay Air layer ventilated Tyvek Cavity Celotex GA Celotex GA Celotex GA Gyproc Wallboard (12.5mm) Plaster, standard Internal surface
3 Condensation Risk Analysis Report ge 2 of 10 table: Interface - between layers Interface temp. Satur. vapour Dew point 60 days External surface No 1. External surface / Tiles, clay No 2. Tiles, clay / Air layer ventilated No 3. Air layer ventilated / Tyvek No 4. Tyvek / Cavity No 5. Cavity / Celotex GA No 6. Celotex GA4000 / Celotex GA No 7. Celotex GA4000 / Celotex GA No 8. Celotex GA4000 / Gyproc Wallboard (12.5mm) No 9. Gyproc Wallboard (12.5mm) / Plaster, standard No Plaster, standard / Internal surface No Internal surface No risk Y/N Interface temperature / Dew point graphical representation:
4 Leinster Square SAP Modelling Planning Submission Condensation Risk Analysis Report ge 3 of 10 Property Reference: MSBC Website Survey Reference: 001 Issue 1 Prop Type Ref: Project: 39, The Old Common, Chalford, STROUD, Gloucestershire, GL6 8HH SAP Rating: 80 C Environmental:82 B CO2 Emissions (t/year): 0.98 General Requirements Compliance: ss DER: ss DFEE: TER: TFEE: Issued on Date: 24.Jul.2014 Percentage DER<TER: Percentage DFEE<TFEE: CfSH Results Version: ENE1 Credits: N/A ENE2 Credits: N/A ENE7 Credits: N/A CfSH Level: N/A Surveyor: Mark Sheehan, Tel: Surveyor ID: A Address: Chalford, Stroud, Gloucestershire, GL6 8HH Client: Dan Stewart Software Version: Elmhurst Energy Systems SAP2012 Calculator (Design System) version 1.02r36 SAP version:, Regs Region: England (rt L1A 2013), Calculation Type: New Dwelling As Designed Roof - Flat Ceilings Environmental conditions: External conditions: Temperature: 5 C Relative Humidity: 95 % Internal conditions: Temperature: 15 C Relative Humidity: 65 % Table of layers: Layer Thickness mm conduct. W/m.K thermal resistivity vapourt External surface Roof space ROCKWOOL ROLL ROCKWOOL ROLL ROCKWOOL ROLL Plasterboard, standard Plaster, standard Internal surface
5 Condensation Risk Analysis Report ge 4 of 10 table: Interface - between layers Interface temp. Satur. vapour Dew point 60 days External surface No 1. External surface / Roof space No 2. Roof space / ROCKWOOL ROLL No 3. ROCKWOOL ROLL / ROCKWOOL ROLL No 4. ROCKWOOL ROLL / ROCKWOOL ROLL No 5. ROCKWOOL ROLL / Plasterboard, standard No 6. Plasterboard, standard / Plaster, standard No Plaster, standard / Internal surface No Internal surface No risk Y/N Interface temperature / Dew point graphical representation:
6 Leinster Square SAP Modelling Planning Submission Condensation Risk Analysis Report ge 5 of 10 Property Reference: MSBC Website Survey Reference: 001 Issue 1 Prop Type Ref: Project: 39, The Old Common, Chalford, STROUD, Gloucestershire, GL6 8HH SAP Rating: 80 C Environmental:82 B CO2 Emissions (t/year): 0.98 General Requirements Compliance: ss DER: ss DFEE: TER: TFEE: Issued on Date: 24.Jul.2014 Percentage DER<TER: Percentage DFEE<TFEE: CfSH Results Version: ENE1 Credits: N/A ENE2 Credits: N/A ENE7 Credits: N/A CfSH Level: N/A Surveyor: Mark Sheehan, Tel: Surveyor ID: A Address: Chalford, Stroud, Gloucestershire, GL6 8HH Client: Dan Stewart Software Version: Elmhurst Energy Systems SAP2012 Calculator (Design System) version 1.02r36 SAP version:, Regs Region: England (rt L1A 2013), Calculation Type: New Dwelling As Designed Wall - External Walls Environmental conditions: External conditions: Temperature: 5 C Relative Humidity: 95 % Internal conditions: Temperature: 15 C Relative Humidity: 65 % Table of layers: Layer Thickness mm conduct. W/m.K thermal resistivity vapourt External surface Brick, outer leaf Earthwool Dritherm 32 Ultimate Earthwool Dritherm 32 Ultimate Celcon Solar - Normal - Trad joint 10mm airspace/timber battens Plasterboard (standard wallboard) Plaster, standard Internal surface
7 Condensation Risk Analysis Report ge 6 of 10 table: Interface - between layers Interface temp. Satur. vapour Dew point 60 days risk Y/N External surface No 1. External surface / Brick, outer leaf No 2. Brick, outer leaf / Earthwool Dritherm 32 Ultimate No 3. Earthwool Dritherm 32 Ultimate / Earthwool Dritherm 32 Ultimate No 4. Earthwool Dritherm 32 Ultimate / Celcon Solar - Normal - Trad joint 10m m No 5. Celcon Solar - Normal - Trad joint 10mm / airspace/timber battens No 6. airspace/timber battens / Plasterboard (standard wallboard) No 7. Plasterboard (standard wallboard) / Plaster, standard No Plaster, standard / Internal surface No Internal surface No Interface temperature / Dew point graphical representation:
8 Leinster Square SAP Modelling Planning Submission Condensation Risk Analysis Report ge 7 of 10 Property Reference: MSBC Website Survey Reference: 001 Issue 1 Prop Type Ref: Project: 39, The Old Common, Chalford, STROUD, Gloucestershire, GL6 8HH SAP Rating: 80 C Environmental:82 B CO2 Emissions (t/year): 0.98 General Requirements Compliance: ss DER: ss DFEE: TER: TFEE: Issued on Date: 24.Jul.2014 Percentage DER<TER: Percentage DFEE<TFEE: CfSH Results Version: ENE1 Credits: N/A ENE2 Credits: N/A ENE7 Credits: N/A CfSH Level: N/A Surveyor: Mark Sheehan, Tel: Surveyor ID: A Address: Chalford, Stroud, Gloucestershire, GL6 8HH Client: Dan Stewart Software Version: Elmhurst Energy Systems SAP2012 Calculator (Design System) version 1.02r36 SAP version:, Regs Region: England (rt L1A 2013), Calculation Type: New Dwelling As Designed Wall - Retaining Wall Environmental conditions: External conditions: Temperature: 5 C Relative Humidity: 95 % Internal conditions: Temperature: 15 C Relative Humidity: 65 % Table of layers: Layer Thickness mm conduct. W/m.K thermal resistivity vapourt External surface Blockwork, dense Concrete, reinforced (2% steel) Blockwork, dense Concrete, medium density Celotex GA Celcon Solar - Normal - Trad joint 10mm airspace/plaster dabs Gyproc Wallboard (12.5mm) Plaster, standard Internal surface
9 Condensation Risk Analysis Report ge 8 of 10 table: Interface - between layers Interface temp. Satur. vapour Dew point 60 days External surface No 1. External surface / Blockwork, dense No 2. Blockwork, dense / Concrete, reinforced (2% steel) No 3. Concrete, reinforced (2% steel) / Blockwork, dense No 4. Blockwork, dense / Concrete, medium density No 5. Concrete, medium density / Celotex GA No 6. Celotex GA4000 / Celcon Solar - Normal - Trad joint 10mm No 7. Celcon Solar - Normal - Trad joint 10mm / airspace/plaster dabs No 8. airspace/plaster dabs / Gyproc Wallboard (12.5mm) No 9. Gyproc Wallboard (12.5mm) / Plaster, standard No Plaster, standard / Internal surface No Internal surface No risk Y/N Interface temperature / Dew point graphical representation:
10 Leinster Square SAP Modelling Planning Submission Condensation Risk Analysis Report ge 9 of 10 Property Reference: MSBC Website Survey Reference: 001 Issue 1 Prop Type Ref: Project: 39, The Old Common, Chalford, STROUD, Gloucestershire, GL6 8HH SAP Rating: 80 C Environmental:82 B CO2 Emissions (t/year): 0.98 General Requirements Compliance: ss DER: ss DFEE: TER: TFEE: Issued on Date: 24.Jul.2014 Percentage DER<TER: Percentage DFEE<TFEE: CfSH Results Version: ENE1 Credits: N/A ENE2 Credits: N/A ENE7 Credits: N/A CfSH Level: N/A Surveyor: Mark Sheehan, Tel: Surveyor ID: A Address: Chalford, Stroud, Gloucestershire, GL6 8HH Client: Dan Stewart Software Version: Elmhurst Energy Systems SAP2012 Calculator (Design System) version 1.02r36 SAP version:, Regs Region: England (rt L1A 2013), Calculation Type: New Dwelling As Designed Floor - Ground Floor Environmental conditions: External conditions: Temperature: 5 C Relative Humidity: 95 % Internal conditions: Temperature: 15 C Relative Humidity: 65 % Table of layers: Layer Thickness mm conduct. W/m.K thermal resistivity vapourt External surface Concrete, medium density Polythene, 500 gauge Celotex GA Celotex GA Polythene,1000 gauge Internal surface
11 Condensation Risk Analysis Report ge 10 of 10 table: Interface - between layers Interface temp. Satur. vapour Dew point 60 days External surface No 1. External surface / Concrete, medium density No 2. Concrete, medium density / Polythene, 500 gauge No 3. Polythene, 500 gauge / Celotex GA No 4. Celotex GA4000 / Celotex GA No 5. Celotex GA4000 / Polythene,1000 gauge No Polythene,1000 gauge / Internal surface No Internal surface No risk Y/N Interface temperature / Dew point graphical representation:
Standard Assessment Procedure
Standard Assessment Procedure For assessing the energy performance of dwellings (2006) FOR Conversion, Flat 3, 92 Ladbroke Road, Redhill. March 2010 www.sap-calculations.co.uk www.sap-calculations.co.uk
Simple Building Estimating. Example Reports
Simple Building Estimating Example Reports Image franckito / 123RF Stock Photo Table of Contents Software and data Snape Computers Ltd 1996 2017 Full Labour, Material, Plant, SubContract, etc Detailed
DELTA Test Report. DANAK TEST Reg. no Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time
We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 100 Measurement of Sound Absorption Coefficient for Kvadrat Soft Cells Wall Panel Type Time Client: Kvadrat Soft Cells A/S Page 1
ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS
Revision index Date of implementation A 15/03/2013 ASSOCIATION POUR LA CERTIFICATION DES MATERIAUX ISOLANTS 4, avenue du Recteur-Poincarré, 75782 Paris Cedex 16 Tel. 33.(0)1.64.68.84.97 Fax. 33.(0)1.64.68.83.45
T H E R MOF L O C. : : h o t p a p e r f o r e n e r g y - s a v e r s! Insulation made of cellulose fibre. : : R o o f i n s u l a t i o n
T H E R MOF L O C Insulation made of cellulose fibre : : h o t p a p e r f o r e n e r g y - s a v e r s! : : t h e t r e n d t o w a r d s i n t e l l i g e n t i n s u l a t i o n! : : R o o f i n s
Technical Report. Project. The Laboratory Determination of The Random Incidence sound Absorption Coefficient of VertiQ Panels.
Technical Report Ref Number C/21387/R01a Date 06 April 2011 Project The Laboratory Determination of The Random Incidence sound Absorption Coefficient of VertiQ Panels Prepared for Rockfon Rockwool A/S
DELTA Test Report. Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object. Performed for Flex Acoustics
DELTA Test Report TEST Reg. no. 100 Measurement of Sound Absorption for AqFlex ON, one Sample as a discrete Object Performed for Flex Acoustics Project no.: T202611 Page 1 of 7 21 January 2013 DELTA Venlighedsvej
Measurement of sound absorption coefficient for Fraster felt SpaceCover
DELTA Test Report TEST Reg. no. 100 Measurement of sound absorption coefficient for Fraster felt SpaceCover Performed for Fraster ApS Project no.: I100645 Page 1 of 9 27 November 2014 DELTA Venlighedsvej
Building physics. Reinforced concrete/reinforced concrete. Steel/reinforced concrete. Timber/reinforced concrete. Steel/steel.
Building physics Building physics Reinforced concrete/reinforced concrete Steel/reinforced concrete Timber/reinforced concrete Steel/steel 1 Thermal bridges Definition of thermal bridges Thermal bridges
From Table 1 4. DL = [12 lb/ft 2 # in.(6 in.)] (15 ft)(10 ft) = 10,800 lb. LL = (250 lb/ft 2 )(15 ft)(10 ft) = 37,500 lb.
![From Table 1 4. DL = [12 lb/ft 2 # in.(6 in.)] (15 ft)(10 ft) = 10,800 lb. LL = (250 lb/ft 2 )(15 ft)(10 ft) = 37,500 lb.](/thumbs/86/93354768.jpg "From Table 1 4. DL = [12 lb/ft 2 # in.(6 in.)] (15 ft)(10 ft) = 10,800 lb. LL = (250 lb/ft 2 )(15 ft)(10 ft) = 37,500 lb.")
1 1. The floor of a heavy storage warehouse building is made of 6-in.-thick stone concrete. If the floor is a slab having a length of 15 ft and width of 10 ft, determine the resultant force caused by the
Homework #4 Solution
Homework #4 Solution Problem 6.4 Determine the design winter heat loss tough each of the following components of a building located in Minneapolis, Minnesota: (a) Wall having 648 ft 2 of area and construction
Building Envelope Requirements Overview Page 3-4
Building Envelope Requirements Overview Page 3-4 The benefit of a high reflectance surface is obvious: while dark surfaces absorb the sun s energy (visible light, invisible infrared. and ultraviolet radiation)
ROBERT SMITH ASSOCIATES LTD CONSULTING STRUCTURAL AND CIVIL ENGINEERS Spencers Crossing, Mill Lane, Great Alne, Warks. B49 6JA Tel
No. 14 001 Checked RFS Sheet 1 REFERENCE DRAWINGS AND SKETCH DETAILS Engineer's: Robert Smith Associates SK / 1B-4B Architect's: GWR BW 004 014 DESIGN CODES: British Standards ( all relevant and latest
LABORATORY MEASUREMENTS OF THE SOUND ABSORPTION COEFFICIENTS OF OSCAR EVO-PANELS
Report No. L/3237 Page 1 of 8 for Oscar Acoustics Michaels Lane Ash Kent TN15 7HT Dated: 24 July 2012 LABORATORY MEASUREMENTS OF THE SOUND ABSORPTION COEFFICIENTS OF OSCAR EVO-PANELS Report Author: M Sawyer
Imagine... a Roof that can pay for Itself! 1 Cool Roof Leader THE LEADER IN COOL ROOF TILE IN THE U.S.
Imagine... a Roof that can pay for Itself! # 1 Cool Roof Leader THE LEADER IN COOL ROOF TILE IN THE U.S. MCA is the number one leader in clay cool roof tile manufacturing in the U.S. MCA offers 33 CRRC
FUNDAMENTALS OF HVAC
FUNDAMENTALS OF HVAC Prof.Dr. Yusuf Ali KARA Res.Asst. Semih AKIN 1 INTRODUCTION Terminology: HVAC: Heating, ventilating, air-conditioning and refrigerating. Air conditioning is the process of treating
COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING
COVENANT UNIVERSITY NIGERIA TUTORIAL KIT OMEGA SEMESTER PROGRAMME: MECHANICAL ENGINEERING COURSE: MCE 524 DISCLAIMER The contents of this document are intended for practice and leaning purposes at the
Hygrothermal Performance of Ventilated Cold Roofs an Experimental Study
Hygrothermal Performance of Ventilated Cold Roofs an Experimental Study Andreas Holm ABSTRACT Kristin Lengsfeld Attics with an insulation on the ceiling plane inherently are more prone to moisture damage
DELTA Test Report. Measurement of sound absorption coefficient for 15 mm Fraster felt Plus acoustic panels with mounting depth 45 mm
DELTA Test Report TEST Reg. no. 100 Measurement of sound absorption coefficient for 15 mm Fraster felt Plus acoustic panels with mounting depth 45 mm Performed for Fraster ApS DANAK 100/2275 Project no.:
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
Experimental measurements and analysis of the indoor conditions in Italian museum storerooms: a study case
Experimental measurements and analysis of the indoor conditions in Italian museum storerooms: a study case F. Cappelletti, P. Romagnoni and A. Birra University Iuav of Venezia, Italy Aims and methods Analysis
a 1 ft2 144 in 2 b 26 in.
1 1. The floor of a heavy storage warehouse building is made of 6-in.-thick stone concrete. If the floor is a slab having a length of 15 ft and width of 10 ft, determine the resultant force caused by the
Publ. No. T Rev. a326 ENGLISH (EN) March 6,
20.3.8 Excerpt from Technical Note Assessing thermal bridging and insulation continuity (UK example) 20.3.8.1 Credits This Technical Note was produced by a working group including expert thermographers,
Moisture in Buildings. Steffen Vissing Andersen. VIA University College Campus Horsens
Moisture in Buildings Steffen Vissing Andersen VIA University College Campus Horsens 009 Contents 1. Moisture in the air... 3 1.1. Absolute humidity diagram...3 1.. Water vapour pressure diagram... 4 1.3.
PHYSICS OF FOIL. HEAT GAIN/LOSS IN BUILDINGS. Up Heat Flow. Down Heat Flow. Side Heat Flow
HEAT GAIN/LOSS IN BUILDINGS There are three modes of heat transfer: CONDUCTION, CONVECTION, and RADIATION (INFRA-RED). Of the three, radiation is the primary mode; conduction and convection are secondary
Principles of Food and Bioprocess Engineering (FS 231) Problems on Heat Transfer
Principles of Food and Bioprocess Engineering (FS 1) Problems on Heat Transfer 1. What is the thermal conductivity of a material 8 cm thick if the temperature at one end of the product is 0 C and the temperature
announcements 4/17/08
Heat Transfer and the Building Envelope ARCH 331/431 Spring 2008 Lecture 6 announcements 4/17/08 A3: Envelope Heat Transfer Assignment: Available later today (course website) References: Available by this
WUFI Workshop NBI / SINTEF 2008 Radiation Effects On Exterior Surfaces
WUFI Workshop NBI / SINTEF 2008 Radiation Effects On Exterior Surfaces Manfred Kehrer Content: Introduction; Importance of Radiation Short Trip into Radiation Physics Typical Handling of Radiation on Exterior
Consultancy Report Ref: 9383-R01
Consultancy Report Ref: 9383-R01 Submitted to: Prepared by: Mr Tim Simmons The Woolley Shepherd Secret Meadow Weekmoor Milverton Taunton TA4 1QE John Fithyan Laboratory Manager Approved for issue by: Andy
MOISTURE PERMEABILITY DATA PRESENTED AS A MATHEMATICAL FUNCTION APPLICABLE TO HEAT AND MOISTURE TRANSPORT MODELS
MOISTURE PERMEABILITY DATA PRESENTED AS A MATHEMATICAL FUNCTION APPLICABLE TO HEAT AND MOISTURE TRANSPORT MODELS Dr. Graham H. Galbraith Glasgow Caledonian University Mr. R. Craig McLean The University
WUFI Workshop at NTNU /SINTEF Fundamentals
WUFI Workshop at NTNU /SINTEF 2008 Fundamentals Contents: From steady-state to transient Heat storage and -transport Moisture storage and -transport Calculation of coupled transport Model limitations 2
INVESTIGATION OF THE PERFORMANCE OF COOLING PANELS: CEILING AND FLOOR PANElS.
INVESTIGATION OF THE PERFORMANCE OF COOLING PANELS: CEILING AND FLOOR PANElS. * M. Hammad, Al Helo, S. And Khlaif, B. University of Jordan. Mechanical Engineering Department. hammad@ju.edu.jo 1.0 ABSTRACT:
Energy and Buildings
Energy and Buildings 42 (2010) 1753 1758 Contents lists available at ScienceDirect Energy and Buildings journal homepage: www.elsevier.com/locate/enbuild A calculation method for the floor surface temperature
Luminous Data Analysis and Quality Assurance of Climate Based Daylighting Simulation. Francesco Anselmo
Luminous Data Analysis and Quality Assurance of Climate Based Daylighting Simulation Francesco Anselmo 2 Windows 3 Recent window design Le Corbusier A sheet of glass and three partition walls make an ideal
CONSTRUCTION MATERIALS
CONSTRUCTION MATERIALS T E C H N O L O G I E S LABORATORY TEST REPORT Report for: 6 Cherry Ave Penticton, BC VA L7 Canada Product(s): Deksmart Ultra 68mil Decking Membrane Manufacturer: O Sullivan Films,
Examination Heat Transfer
Examination Heat Transfer code: 4B680 date: 17 january 2006 time: 14.00-17.00 hours NOTE: There are 4 questions in total. The first one consists of independent sub-questions. If necessary, guide numbers
TREES Training for Renovated Energy Efficient Social housing
TREES Training for Renovated Energy Efficient Social housing Intelligent Energy -Europe programme, contract n EIE/05/110/SI2.420021 Section 2 Tools 2.1 Simplified heating load calculation Tamas CSOKNYAI
New correlations for the standard EN 1264
New correlations for the standard EN 164 Federico Boldrin, Michele De arli, Giacomo Ruaro DFT Dipartimento di Fisica Tecnica, Università degli Studi di Padova, Italy orresponding email: michele.decarli@unipd.it
Test Report. RI Acoustic Lab. Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier. 20 Feb. 07
Test Report RI Acoustic Lab Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier 20 Feb. 07 Title Measurement of Sound Absorption Coefficient for RockDelta NoiStop Noise Barrier
Ground Penetrating Radar & By Mike Kelty Western Technologies Inc.
Ground Penetrating Radar & Thermorgraphy By Mike Kelty Western Technologies Inc. Overview Types of Locating Methods/Equipment How GPR Works GPR Applications How Thermography Works Thermography Applications
ARCH 348 BUILDING AND ENVIRONMENTAL SYSTEMS
ARCH 348 BUILDING AND ENVIRONMENTAL SYSTEMS Instructor: Prof. Dr. Uğur Atikol Web site for instructor: http://staff.emu.edu.tr/uguratikol/ Web site for the course: http://staff.emu.edu.tr/uguratikol/en/teaching/courses/arch348-building-andenvironmental-systems-in-architecture
RETAINING WALL LOADS: Horizontal Equivalent Fluid Pressure = pcf. (Load Case = Soil)
QuickWall 8.0 - RETAINING WALL ANALYSIS AND DESIGN ================================================================================ Job ID : Job Description : Designed By : ================================================================================
EXPERIMENTAL ANALYSIS OF AIR-CONDITIONING IN HOSPITAL ROOMS BY MEANS OF LIGHT RADIANT CEILINGS
EXPERIMENTAL ANALYSIS OF AIR-CONDITIONING IN HOSPITAL ROOMS BY MEANS OF LIGHT RADIANT CEILINGS Renato M. Lazzarin renato@gest.unipd.it Francesco Castellotti caste@gest.unipd.it Filippo Busato busato@gest.unipd.it
Response function method
Response function method Response function method An analytical approach to the solution of ordinary and partial differential equations using the Laplace transform: An equation in the time domain is transformed
IDA ICE CIBSE-Validation Test of IDA Indoor Climate and Energy version 4.0 according to CIBSE TM33, issue 3
FHZ > FACHHOCHSCHULE ZENTRALSCHWEIZ HTA > HOCHSCHULE FÜR TECHNIK+ARCHITEKTUR LUZERN ZIG > ZENTRUM FÜR INTEGRALE GEBÄUDETECHNIK IDA ICE CIBSE-Validation Test of IDA Indoor Climate and Energy version 4.0
Radiation Effects On Exterior Surfaces
Radiation Effects On Exterior Surfaces Kehrer Manfred, Dipl.-ng., Hygrothermics Department, Fraunhofer BP; Manfred.Kehrer@ibp.fraunhofer.de Schmidt Thoma Dipl.-Phys., Hygrothermics Department, Fraunhofer
twenty one concrete construction: shear & deflection ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture
ARCHITECTURAL STRUCTURES: FORM, BEHAVIOR, AND DESIGN DR. ANNE NICHOLS SUMMER 2014 lecture twenty one concrete construction: Copyright Kirk Martini shear & deflection Concrete Shear 1 Shear in Concrete
HOT /05/2014. Page 1 of 14 GENERAL HOUSE CHARACTERISTICS. Natural Resources CANADA Version sample house report
Page 1 of 14 File: Application Type: sample house report EnerGuide for New Houses HOT2000 Natural Resources CANADA Version 10.51 Weather Library: C:\H2KEGH~1\Dat\Wth100.dir Weather Data for VANCOUVER,
Analytical and experimental study of single frame double wall
Analytical and experimental study of single frame double wall C. Guigou-Carter and M. Villot Center for Building Science and Technology Acoustics and Lighting Department Paper ID 203 Analytical and experimental
Available online at ScienceDirect. Procedia Engineering 121 (2015 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 121 (2015 ) 2176 2183 9th International Symposium on Heating, Ventilation and Air Conditioning (ISHVAC) and the 3rd International
LABORATORY MEASUREMENTS OF THE REDUCTION OF TRANSMITTED IMPACT NOISE PANETTI OVERLAID BY CONCRETE FLOORING
Report No. L/3194 Page 1 of 8 for EA Mimarlik Insaat Teknolojileri San.ve. Tic.Ltd.Sti 1420/3 Sokak NO. 22 Kizilkanat Silesi D Blok D.12 Alsancak Izmir Turkey Dated: 18 July 2011 LABORATORY MEASUREMENTS
Theory of Shear Strength
MAJ 1013 ADVANCED SOIL MECHANICS Theory of Shear Strength Prepared by, Dr. Hetty 1 Strength of different materials Steel Concrete Soil Tensile strength Compressive strength Shear strength Complex behavior
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and selfadhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
DEVELOPMENT OF COOLING LOAD TEMPERATURE DIFFERENTIAL VALUES FOR BUILDING ENVELOPES IN THAILAND
DEVELOPMENT OF COOLING LOAD TEMPERATURE DIFFERENTIAL VALUES FOR BUILDING ENVELOPES IN THAILAND Somsak Chaiyapinunt*, Khemmachart Mangkornsaksit, and Boonyarit Phueakphongsuriya ABSTRACT This article describes
HYGROTHERMAL CHARACTERISTICS OF PUMICE AGGREGATE CONCRETE USED FOR MASONRY WALL BLOCKS
HYGROTHERMAL CHARACTERISTICS OF PUMICE AGGREGATE CONCRETE USED FOR MASONRY WALL BLOCKS Kus, Hülya Dr.Eng., Assoc. Professor, Istanbul Technical University, Faculty of Architecture, kushu@itu.edu.tr In
Acoustic spaces: comfort and social sustainability
European congress Eco-Technologies for the future 9 June 2010 Acoustic materials and spaces for sustainability Professor Jian Kang School of Architecture, University of Sheffield, UK Outline Acoustics
Quarries National Joint Advisory Committee (QNJAC) Occupational Health. Information Sheet 10. April Management of Asbestos on Site
Occupational Health Quarries National Joint Advisory Committee (QNJAC) Occupational Health Information Sheet 10 April 2013 Management of Asbestos on Site This information sheet has been developed by the
IPRO 335. Flying into a New Generation of Design
IPRO 335 Flying into a New Generation of Design Objective Develop a regional airport in Bloomington, Illinois Illinois Bloomington Tasks Architectural Kimberly Lao Chun Hang Lau Acoustics and Lighting
CHAPTER 4. Design of R C Beams
CHAPTER 4 Design of R C Beams Learning Objectives Identify the data, formulae and procedures for design of R C beams Design simply-supported and continuous R C beams by integrating the following processes
MOISTURE TRANSPORT AND DEHYDRATION IN HEATED GYPSUM, AN NMR STUDY
MOISTURE TRANSPORT AND DEHYDRATION IN HEATED GYPSUM, AN NMR STUDY G.H.A. van der Heijden (1), L. Pel (1) and K. Kopinga (1) (1) Transport in Porous materials, Applied Physics, Eindhoven University of Technology,
At a certain moment the following temperatures are measured with a psychrometer: 25 C and 17,5 C
ANSWERS Practical Day 1 Exercise Humidity Saturated vapour pressure e s (kpa) γ Temperature t ( C) In the figure above you see (an example of) the relation between vapour pressure and temperature. The
Measurement of Acoustic Properties of light weight concrete SL-Deck
DELTA Test Report TEST Reg. no. 100 Measurement of Acoustic Properties of light weight concrete SL-Deck Performed for Abeo A/S Project no.: I100486 Page 1 of 25 30 June 2014 DELTA Venlighedsvej 4 2970
12.1 Product data sheet
Schlüter -KERDI-BOARD Substrate waterproof substrate and structural board 12.1 Product data sheet Application and Function Schlüter -KERDI-BOARD is a multifunctional tile substrate for wall areas, which
A SIMPLE MODEL FOR THE DYNAMIC COMPUTATION OF BUILDING HEATING AND COOLING DEMAND. Kai Sirén AALTO UNIVERSITY
A SIMPLE MODEL FOR THE DYNAMIC COMPUTATION OF BUILDING HEATING AND COOLING DEMAND Kai Sirén AALTO UNIVERSITY September 2016 CONTENT 1. FUNDAMENTALS OF DYNAMIC ENERGY CALCULATIONS... 3 1.1. Introduction...
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying
CFC, HCFC free, GWP zero thermal insulation in the form of tubes, sheets, coils and self-adhesive tape, a Flexible Elastomeric Foam product complying with the European standard EN. EUROBATEX is a closed
You are looking at a textile fabric pattern. Please answer the following questions.
Introductory Activity: You are looking at a textile fabric pattern. Please answer the following questions. 1.) What different patterns do you see inside the fabric? 2.) How are the shapes in the pattern
Job No. Sheet No. Rev. CONSULTING Engineering Calculation Sheet. Member Design - Steel Composite Beam XX 22/09/2016
CONSULTING Engineering Calculation Sheet jxxx 1 Member Design - Steel Composite Beam XX Introduction Chd. 1 Grade 50 more common than Grade 43 because composite beam stiffness often 3 to 4 times non composite
SUMMARY OF OFFICIAL TEST REPORTS
SUMMARY OF OFFICIAL TEST REPORTS 2014 TABLE OF CONTENTS Manufactured by: SPM Thermo-Shield Inc. (USA) Tel.: 001-239-234-5832 Email: spm@thermoshield.com Fax: 001-239-236-6767 www.thermoshield.com Thermal
Drying out capacity and snow melting risk for ventilated wooden roofs - a parameter study
Drying out capacity and snow melting risk for ventilated wooden roofs - a parameter study Sivert Uvsløkk SINTEF Byggforsk 9th Symposium on Building Physics in the Nordic countries Thursday 2.06.2011 Tampere
Structural, Snow & Wind Loading Appraisal Report
Company Name Or Logo Here Structural, Snow & Wind Loading Appraisal Report In accordance with Guide to the Installation of Photovoltaic Systems 2012 2 nd Edition Reference number 001 Company Name Solar
Laboratory Testing Total & Effective Stress Analysis
SKAA 1713 SOIL MECHANICS Laboratory Testing Total & Effective Stress Analysis Prepared by: Dr. Hetty Mohr Coulomb failure criterion with Mohr circle of stress 2 ' 2 ' ' ' 3 ' 1 ' 3 ' 1 Cot Sin c ' ' 2
Ceiling Radiant Cooling Panels Employing Heat-Conducting Rails: Deriving the Governing Heat Transfer Equations
Authors may request permission to reprint or post on their personal or company Web site once the final version of the article has been published. A reprint permission form may be found at www.ashrae.org.
THM80X Series Feature Application. Temperature & Humidity / Flow Measuring Specialist
THM80X Series Feature Application IP67 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear adjustment temperature & humidity by computer,
12.1 Schlüter -KERDI-BOARD
Innovative profiles 12.1 Schlüter -KERDI-BOARD S u b s t r a t e UNIVERSAL STRUCTURAL PANEL, BONDED WATERPROOFING Application and Function Schlüter -KERDI-BOARD is a multifunctional tile substrate for
Testing Procedure: AS ISO
RMIT University Building 1 Level 1 Room 1 124 La Trobe Street Melbourne VIC 3000 Australia GPO Box 2476V Melbourne VIC 3001 Australia Tel. +61 3 9925 2000 Fax +61 3 9925 2000 www.rmit.edu.au REPORT ON
Transient Analysis of the Buoyancy Driven Flow in a Passive Solar System for Indoor Heating
Excerpt from the Proceedings of the COMSOL Conference 2010 Paris Transient Analysis of the Buoyancy Driven Flow in a Passive Solar System for Indoor Heating Cammarata G., Petrone G. *, Cammarata L. Department
Thermal Desorption: A Solution for Insoluble Case
Thermal Desorption: A Solution for Insoluble Case Session C : innovations techniques Solutions environnementales clé en main pour une valorisation active de sites VALGO - Copyright 2009 Technical Principle
version 5 FLOOR COVERING STANDARD SYMBOLS ELASTISCHE, TEXTILE UND LAMINAT BODENBELÄGE INTRODUCTION COPYRIGHT NOTICE
FLOOR COVERING STANDARD SYMBOLS INTRODUCTION The floorsymbols font can be used by pressing a key or keycombination. In this folder you can find the key or keycombination in addition to the symbol you want
CAE 463/524 Building Enclosure Design Fall 2013
CAE 463/524 Building Enclosure Design Fall 2013 Lecture 4: September 11, 2013 Complex conduction in building enclosures Advancing energy, environmental, and sustainability research within the built environment
Section 2 of 6 Applied Psychrometrics
Section 2 of 6 Applied Psychrometrics Psychrometric chart - your energy map Key psychrometric variables for humidity Predicting building condensation Hot weather Cold weather Predicting moisture sorption
S.E. (Chemical) (Second Semester) EXAMINATION, 2012 HEAT TRANSFER (2008 PATTERN) Time : Three Hours Maximum Marks : 100
Total No. of Questions 12] [Total No. of Printed Pages 7 Seat No. [4162]-187 S.E. (Chemical) (Second Semester) EXAMINATION, 2012 HEAT TRANSFER (2008 PATTERN) Time : Three Hours Maximum Marks : 100 N.B.
THERMAL SIMULATION REPORT. TCL2013-Origin-01 Prepared For:
THERMAL SIMULATION REPORT Report Number: TCL2013-Origin-01 Prepared For: Origin Frames Ltd Unit 3 Sunters End Hillbottom Road Sands Industrial Estate High Wycombe Bucks HP12 4HS Window System Identifier:
PART 2 THERMAL RESPONSE. DIF SEK Part 2: Thermal Response 0/ 44
DIF SEK PART 2 THERMAL RESPONSE DIF SEK Part 2: Thermal Response 0/ 44 Resistance to fire - Chain of events Θ Loads 1: Ignition Steel columns time 2: Thermal action 3: Mechanical actions R 4: Thermal response
ISO INTERNATIONAL STANDARD. Thermal bridges in building construction Linear thermal transmittance Simplified methods and default values
INTERNATIONAL STANDARD ISO 14683 First edition 1999-06-15 Thermal bridges in building construction Linear thermal transmittance Simplified methods and default values Points thermiques dans les bâtiments
Base Design Considerations for Jointed Concrete. Dan G. Zollinger, Ph.D., P.E. Texas A&M University, College Station, TX, USA
Base Design Considerations for Jointed Concrete Dan G. Zollinger, Ph.D., P.E. Texas A&M University, College Station, TX, USA Discussion What is Erosion Effects on Performance Erosion Testing Use of Erosion
Topic 1 The Atmosphere and Atmospheric Variables
Name Notes: Topic 1 The Atmosphere Regents Earth Science Topic 1 The Atmosphere and Atmospheric Variables What is the atmosphere? Meteorology is the study of A. Structure of the Atmosphere: What two gases
Eurocode 8 Part 3: Assessment and retrofitting of buildings
in the Euro-Mediterranean Area Eurocode 8 Part 3: Assessment and retrofitting of buildings Paolo Emilio Pinto Università di Roma La Sapienza Urgency of guidance documents for assessment and retrofit in
Efficiency Matrix - Halogen Downlight Mitt - R Value Testing. Halogen Light Mitt - Thermal Efficiency Analysis. Efficiency Matrix Pty Ltd
Efficiency Matrix - Halogen light Mitt - R Value Testing Halogen Light Mitt - Thermal Efficiency Analysis Report No. 30B-09-0338-TRP-445314-0 Vipac Engineers & Scientists Ltd Melbourne VIC 11 Nov 2009
Development of a small-scale reverberation room
Proceedings of ACOUSTICS 2016 9-11 November 2016, Brisbane, Australia Development of a small-scale reverberation room Alexander Rasa Noise Control Research & Development, Pyrotek Pty Ltd, Sydney, Australia
Energy Use in Homes 2007
Energy Use in Homes 2007 A series of reports on domestic energy use in England Space and Water Heating Energy Use in Homes 2007 A series of reports on domestic energy use in England This is one of a series
Name :. Roll No. :... Invigilator s Signature :.. CS/B.TECH (CE-NEW)/SEM-3/CE-301/ SOLID MECHANICS
Name :. Roll No. :..... Invigilator s Signature :.. 2011 SOLID MECHANICS Time Allotted : 3 Hours Full Marks : 70 The figures in the margin indicate full marks. Candidates are required to give their answers
THERMAL INERTIA OF HOLLOW WALL BLOCKS: ACTUAL BEHAVIOR AND MYTHS
THERMA INERTIA OF HOOW WA BOCKS: ACTUA BEHAVIOR AND MYTHS M. Cianfrini ; M. Corcione ; R. de ieto Vollaro ; E. Habib ; A. Quintino :DIMI Università degli Studi Roma Tre, via della Vasca Navale, 9-6, Rome,
Theory of Shear Strength
SKAA 1713 SOIL MECHANICS Theory of Shear Strength Prepared by, Dr. Hetty 1 SOIL STRENGTH DEFINITION Shear strength of a soil is the maximum internal resistance to applied shearing forces The maximum or
TABLE OF CONTANINET 1. Design criteria. 2. Lateral loads. 3. 3D finite element model (SAP2000, Ver.16). 4. Design of vertical elements (CSI, Ver.9).
TABLE OF CONTANINET 1. Design criteria. 2. Lateral loads. 2-1. Wind loads calculation 2-2. Seismic loads 3. 3D finite element model (SAP2000, Ver.16). 4. Design of vertical elements (CSI, Ver.9). 4-1.
WEATHER STATION FOR SOLAR FARM MONITORING
WEATHER STATION FOR SOLAR FARM MONITORING SOLAR FARM MONITORING SYSTEM: Measures global, horizontal, & background irradiance. Measures wind speed, wind direction, ambient temperature, and relative humidity.
RETAINING WALL ANALYSIS
Retaining Wall Analysis Example (EN997:2004) GEODOMISI Ltd. Dr. Costas Sachpazis Consulting Company for Tel.: (+30) 20 523827, 20 57263 Fax.:+30 20 5746 App'd by RETAINING WALL ANALYSIS In accordance with
SIMULATION TEST REPORT NCTL E0A0
SIMULATION TEST REPORT NCTL-610-21539-1E0A0 REPORT TO: All Seasons Window & Door System Inc. 1340 Metropolitan Avenue Brooklyn, NY 11237 SIMULATION DATE: 11/20/18 PRODUCT: EU400 Tilt & Turn This report
RETAINING WALL ANALYSIS
GEODOMISI Ltd. Dr. Costas Sachpazis Consulting Company for Tel.: (+30) 20 523827, 20 57263 Fax.:+30 20 5746 Retaining wall Analysis & Design (EN997:2004 App'd by RETAINING WALL ANALYSIS In accordance with
3 rd Annual CHAMPS Developers Workshop
Syracuse University Department of Mechanical and Aerospace Engineering L.C. Smith College of Engineering and Computer Science Building Energy and Environmental Systems Laboratory (http://beesl.syr.edu/)
Finite Element Modelling with Plastic Hinges
01/02/2016 Marco Donà Finite Element Modelling with Plastic Hinges 1 Plastic hinge approach A plastic hinge represents a concentrated post-yield behaviour in one or more degrees of freedom. Hinges only