liquids_solids_15dec2017_1st.notebook Liquids and solids Chapters 11 and 12
|
|
- Vanessa Pope
- 5 years ago
- Views:
Transcription
1 liquids_solids_15dec2017_1st.notebook December 15, 2017 Liquids and solids Chapters 11 and 12
2
3
4 Intermolecular forces Intermolecular: forces between molecules Intramolecular: within molecules (i.e. covalent) State changes: molecules intact; phase changes due to changes between the molecules (intermolecular forces only!!!)
5 Types of Intermolecular Forces Dipole Dipole Forces Act between polar molecules Polar: have a net dipole moment About 1% as strong as covalent or ionic Become weaker as the distance between the dipoles increases SOLIDS Molecules are more ordered line up so there are mostly attractive interactions LIQUIDS Molecules have more disorder some repulsive forces
6 For molecules of similar mass/size strength of intermolecular forces increases with increasing polarity Boiling point also increases
7 Types of Intermolecular forces HYDROGEN BONDING Strong dipole-dipole force H bonded to N, O, F Strong because: The bond between H and the highly electronegative atom is very polar The hydrogen is so small that the dipoles can get very close to each other Still much weaker than covalent or the electrostatic force between ions Boiling point is higher than expected b/c the molecules are held more tightly together To form a hydrogen bond what must the non-hydrogen atom (N, O or F) involved in the bond possess?
8 1. In which of these substances is hydrogen bonding likely to play an important role in determining physical properties: methane (CH 4 ), hydrazine (H 2 NNH 2 ), methyl fluoride (CH 3 F), hydrogen sulfide (H 2 S)? 2. In which of these substances is significant hydrogen bonding possible: methylene chloride (CH 2 Cl 2 ), phosphine (PH 3 ), hydrogen peroxide (HOOH), acetone (CH 3 COCH 3 )?
9 Types of Intermolecular Forces LONDON DISPERSION FORCES Exist between all types of molecules Only kind of intermolecular force for noble gas atoms and nonpolar molecules Due to a momentary nonsymmetrical electron distribution Forms a temporary dipole called an instantaneous dipole The temporary dipole can then induce a dipole in a neighboring atom Weak and short lived Polarizability the ease with which the e- charge distribution is distorted
10 Notice that the halogens have a much higher boiling point than the noble gases in the same period. Why? Also notice that the boiling point increase down a group. Why? Dispersion forces increase in strength with increasing molecular mass More electrons = more polarizability Can be more important than dipole dipole forces for large atoms
11 TYPES OF INTERMOLECULAR FORCES ION-DIPOLE FORCES Between an ion and a polar molecule Increases with increasing ionic charge or as the magnitude of the dipole moment increases (more polar molecule) Important for solutions of ionic substances in polar liquids NaCl in water
12 Comparing intermolecular forces MOLECULES OF SIMILAR MASS/SHAPE Dispersion forces about equal Differences in intermolecular forces due to difference in the strength of dipole-dipole interactions Molecule with hydrogen bonding have the strongest IMF MOLECULES WITH BIG DIFFERENCE IN MASS Depends mainly on dispersion forces Generally higher in the substance with the higher molecular mass 1. List the substances BaCl 2, H 2, CO, HF, and Ne in order of increasing boiling point. 2. (a) Identify the intermolecular attractions present in the following substances, and (b) select the substance with the highest boiling point: CH 3 CH 3, CH 3 OH, and CH 3 CH 2 OH.
Sample Exercise 11.1 Identifying Substances That Can Form Hydrogen Bonds
Sample Exercise 11.1 Identifying Substances That Can Form Hydrogen Bonds In which of these substances is hydrogen bonding likely to play an important role in determining physical properties: methane (CH
More informationChapter 11. Intermolecular Forces, Liquids, and Solids
Sample Exercise 11.1 (p. 450) In which of the following substances is hydrogen bonding likely to play an important role in determining physical properties: methane (CH 4 ), hydrazine (H 2 NNH 2 ), methyl
More informationName: Date: Period: #: BONDING & INTERMOLECULAR FORCES
BONDING & INTERMOLECULAR FORCES Page 1 INTERMOLECULAR FORCES Intermolecular forces (van der Waals forces) relative weak interactions that occur between molecules. Most of the physical properties of gases,
More informationINTERMOLECULAR FORCES: Polarity of Molecules. Seventh Course (General Chemistry) by Dr. Istadi
INTERMOLECULAR FORCES: Polarity of Molecules Seventh Course (General Chemistry) by Dr. Istadi 1 Types of Intermolecular Forces The nature of the phases and their changes are due primarily to forces among
More informationIntermolecular Forces OR WHY IS WATER SPECIAL?
Intermolecular Forces OR WHY IS WATER SPECIAL? Define the prefixes Inter Between, as internet, interstate Intra Inside, as intramural Intermolecular Forces (2) Forces between covalent molecules These are
More informationLecture Presentation. Chapter 11. Liquids and Intermolecular Forces. John D. Bookstaver St. Charles Community College Cottleville, MO
Lecture Presentation Chapter 11 Liquids and Intermolecular Forces John D. Bookstaver St. Charles Community College Cottleville, MO Properties of Gases, Liquids, and Solids State Volume Shape of State Density
More informationKinetic Molecular Theory of Gases used to account for Ideal Gas Behavior when gases approach high temperatures and low pressures
LIQUIDS AND SOLIDS Kinetic Molecular Theory of Gases used to account for Ideal Gas Behavior when gases approach high temperatures and low pressures GASES are very different from solids and liquids. We
More informationChap 10 Part 4Ta.notebook December 08, 2017
Chapter 10 Section 1 Intermolecular Forces the forces between molecules or between ions and molecules in the liquid or solid state Stronger Intermolecular forces cause higher melting points and boiling
More informationChapter 11. Intermolecular Forces, Liquids, and Solids
11.2 Intermolecular Forces Intermolecular forces are much weaker than ionic or covalent bonds (e.g., 16 kj/mol versus 431 kj/mol for HCl). Melting or boiling = broken intermolecular forces Intermolecular
More informationIntermolecular Forces I
I How does the arrangement of atoms differ in the 3 phases of matter (solid, liquid, gas)? Why doesn t ice just evaporate into a gas? Why does liquid water exist at all? There must be some force between
More informationLecture Chemistry, The Central Science, 11th edition Theodore L. Brown, H. Eugene LeMay, Jr., and Bruce E. Bursten
Chemistry, The Central Science, 11th edition Theodore L. Brown, H. Eugene LeMay, Jr., and Bruce E. Bursten Lecture 1101 John D. Bookstaver St. Charles Community College Cottleville, MO Molecular Comparison
More informationChapter 11. Intermolecular Forces, Liquids, and Solids
11.2 Intermolecular Forces Intermolecular forces are much weaker than ionic or covalent bonds (e.g., 16 kj/mol versus 431 kj/mol for HCl). Melting or boiling = broken intermolecular forces Intermolecular
More informationComparing Ionic and Covalent Compounds
Comparing Ionic and Covalent Compounds It takes energy to overcome the forces holding particles together. Thus, it takes energy to cause a substance to go from the liquid to the gaseous state. The boiling
More informationFor the following intermolecular forces:
Lecturenotes 1 unit6_review_exercise_2017.odt Lecturenotes 2 unit6_review_exercise_2017.odt Lecturenotes 3 unit6_review_exercise_2017.odt Lecturenotes 4 unit6_review_exercise_2017.odt Answers: 1. Ionic
More informationIntermolecular Forces
Intermolecular Forces Molecular Compounds The simplest molecule is H 2 : Increased electron density draws nuclei together The pair of shared electrons constitutes a covalent bond. Intermolecular Forces
More informationDIFFERENT TYPES OF INTEMOLECULAR FORCES INTERMOLECULAR FORCES
DIFFERENT TYPES OF INTEMOLECULAR FORCES Do all the exercises in your studyguide COMPARISON OF THE THREE PHASES OF MATTER. Matter is anything that occupy space and has mass. There are three states of matter:
More informationDipole-Dipole Interactions https://www.youtube.com/watch?v=cerb1d6j4-m London Dispersion Forces https://www.youtube.com/watch?
CATALYST Lesson Plan GLE Physical Science 22. Predict the kind of bond that will form between two elements based on electronic structure and electronegativity of the elements (e.g., ionic, polar, nonpolar)
More informationWKS Name Intermolecular Forces Period Date
WKS Name Intermolecular orces Period Date Introduction: Substances exist in three states of matter: solids, liquids and gases. We know that molecules are... (a) far apart in gases; (b) close together,
More informationSolids, Liquids and Gases
WHY? Why is water usually a liquid and not a gas? Why does liquid water boil at such a high temperature for such a small molecule? Why does ice float on water? Why do snowflakes have 6 sides? Why is I
More informationIntermolecular Forces of Attraction
Name Unit Title: Covalent Bonding and Nomenclature Text Reference: Pages 189-193 Date Intermolecular Forces of Attraction Intramolecular vs. Intermolecular So far in our discussion of covalent bonding,
More informationChapter 8 Notes. Covalent Bonding
Chapter 8 Notes Covalent Bonding Molecules and Molecular Compounds Helium and Neon are monoatomic, meaning they exist as single atoms Some compounds exist as crystalline solids, such as NaCl Others exist
More informationChapter 12 Section 1
hapter 12 Section 1 Kinetic Molecular Description of Liquids and Solids Noncovalent Forces Intermolecular interactions Electrostatic Forces Dispersion Forces -bonding DNA, RNA Mary J. Bojan hem 110 1 What
More information[8.5] Melting Points and Boiling Points of Solutions
[8.5] Melting Points and Boiling Points of Solutions Melting and Boiling Points We have talked about melting and boiling points earlier in the semester Now we are going to understand how intermolecular
More information11.1 Intermolecular Forces Keeping Matter Together
11.1 Intermolecular Forces Keeping Matter Together Nature s Forces Dr. Fred Omega Garces Chemistry 201 Miramar College 1 Intermolecular Forces Keeping Matter Together Phases of Matter: Terminology Energy
More informationPhysical States of Matter
Intermolecular forces Chapter 5 Physical States of Matter Section 12.3 Physical States of Matter Three phases of matter solid Definite shape and volume solid liquid liquid Definite volume, shape of container
More informationQuick Review. 1. Hybridization. 2. Delocalization. 3. We will not be talking about Molecular Orbital Model.
Quick Review 1. ybridization. 2. Delocalization. 3. We will not be talking about Molecular Orbital Model. **OUR EXAM II IS TURSDAY April 2 nd at 7pm** *BQ5, BQ6 and BQM are in 66 Library *BQ1, BQ2, BQ3,
More informationCh 9 Liquids & Solids (IMF) Masterson & Hurley
Ch 9 Liquids & Solids (IMF) Masterson & Hurley Intra- and Intermolecular AP Questions: 2005 Q. 7, 2005 (Form B) Q. 8, 2006 Q. 6, 2007 Q. 2 (d) and (c), Periodic Trends AP Questions: 2001 Q. 8, 2002 Q.
More informationChapter 14. Liquids and Solids
Chapter 14 Liquids and Solids Section 14.1 Water and Its Phase Changes Reviewing What We Know Gases Low density Highly compressible Fill container Solids High density Slightly compressible Rigid (keeps
More informationSolutions and Intermolecular Forces
Solutions and Intermolecular Forces REVIEW Chemical Bonds Three basic types of bonds: Ionic Electrostatic attraction between ions Covalent Sharing of electrons Metallic Metal atoms bonded to several other
More information1. What is the difference between intermolecular forces and intramolecular bonds? Variations in the Boiling Point of Noble Gases
NAME: DATE: Chemical Bonding Forces Assignment 1. What is the difference between intermolecular forces and intramolecular bonds? 2. Use your data booklet to fill in the following chart Variations in the
More informationChem 11 Unit 4 POLARITY, MOLECULE SHAPE, and BEHAVIOUR
Chem 11 Unit 4 POLARITY, MOLECULE SHAPE, and BEHAVIOUR Polarity is unequal distribution of a charge on a molecule caused by: 1) some degree of ionic character in the bonding (i.e. unequal electron sharing)
More informationThere are two types of bonding that exist between particles interparticle and intraparticle bonding.
There are two types of bonding that exist between particles interparticle and intraparticle bonding. Intraparticle bonding describes the forces that exist within a particle such as a molecule or ionic
More informationChapter 10. Dipole Moments. Intermolecular Forces (IMF) Polar Bonds and Polar Molecules. Polar or Nonpolar Molecules?
Polar Bonds and Polar Molecules Chapter 10 Liquids, Solids, and Phase Changes Draw Lewis Structures for CCl 4 and CH 3 Cl. What s the same? What s different? 1 Polar Covalent Bonds and Dipole Moments Bonds
More informationSupplemental Activities. Module: States of Matter. Section: Intermolecular Forces - Key
Supplemental Activities Module: States of Matter Section: Intermolecular Forces - Key Electrostatic Forces ACTIVITY 1 The purpose of this activity is to practice recognizing the nature of the forces important
More informationUnit 4:Chemical Bonding Practice Packet
Name: KEY Unit 4:Chemical Bonding Practice Packet 1. I can state the three types of chemical bonds. 2. I can state the number of valence electrons that an atom attains to be most stable. 3. I can state
More informationTopic 4: Chemical Bonds. IB Chemistry SL Ms. Kiely Coral Gables Senior High
Topic 4: Chemical Bonds IB Chemistry SL Ms. Kiely Coral Gables Senior High Bell-Ringer Draw an example of each type of intermolecular force using the following molecules: TOPIC 4 TEST NEXT CLASS MONDAY
More informationBonding Practice Problems
NAME 1. When compared to H 2 S, H 2 O has a higher 8. Given the Lewis electron-dot diagram: boiling point because H 2 O contains stronger metallic bonds covalent bonds ionic bonds hydrogen bonds 2. Which
More informationAtoms can form stable units called molecules by sharing electrons.
Atoms can form stable units called molecules by sharing electrons. The formation of molecules is the result of intramolecular bonding (within the molecule) e.g. ionic, covalent. Forces that cause the aggregation
More informationOne Q partial negative, the other partial negative Ø H- bonding particularly strong. Abby Carroll 2
Chemistry Notes v Polarity Experiment Ø Things involved Polarity Solubility Dispersion Ø Polarity Shaving cream has soap steric acid Water is polar Food coloring is polar/ionic because dissolved Like dissolves
More informationWhat are covalent bonds?
Covalent Bonds What are covalent bonds? Covalent Bonds A covalent bond is formed when neutral atoms share one or more pairs of electrons. Covalent Bonds Covalent bonds form between two or more non-metal
More informationRW Session ID = MSTCHEM1 Intermolecular Forces
RW Session ID = MSTCHEM1 Intermolecular Forces Sections 9.4, 11.3-11.4 Intermolecular Forces Attractive forces between molecules due to charges, partial charges, and temporary charges Higher charge, stronger
More informationIntermolecular and Intramolecular Forces. Introduction
Intermolecular and Intramolecular Forces Introduction Atoms can form stable units called molecules by sharing electrons. The formation of molecules is the result of intramolecular bonding (within the molecule)
More informationCfE Higher Chemistry. Unit 1: Chemical Changes and Structure. Intermolecular forces
CfE Higher Chemistry Unit 1: Chemical Changes and Structure Intermolecular forces 05/09/2017 Van der Waal s Forces and London Dispersion Forces 05/09/2017 Learning Outcomes : I can explain the difference
More informationIntermolecular Forces and Physical Properties
Intermolecular Forces and Physical Properties Attractive Forces Particles are attracted to each other by electrostatic forces. The strength of the attractive forces depends on the kind(s) of particles.
More informationWhen intermolecular forces are strong, the atoms, molecules, or ions are strongly attracted to each other, and draw closer together.
INTERMOLECULAR FORCES: THE FORCE BEHIND VARIOUS PROPERTIES WHY? Intermolecular forces are largely responsible for the properties of affinity, solubility, volatility, melting/ boiling point, and viscosity.
More informationQ. What happens when you boil (melt) a compound?
Intermolecular Forces (MHR Text p. 202 206) Molecular compounds are: 1) made up of molecules 2) are made up of two or more nonmetallic atoms 3) held together by covalent bonds (sharing e ) Q. But what
More informationCh. 9 Liquids and Solids
Intermolecular Forces I. A note about gases, liquids and gases. A. Gases: very disordered, particles move fast and are far apart. B. Liquid: disordered, particles are close together but can still move.
More informationChemistry 102 Winter 2010
Today 1. Brief review of bonding. 2. Intermolecular forces. Announcements 1. DROP deadline today. 2. CSULA closure on Jan. 15 (furlough). 3. CSULA closure on Jan. 18 (holiday). 4. ADD deadline on Jan.
More informationName: Date: Blk: Examine your periodic table to answer these questions and fill-in-the-blanks. Use drawings to support your answers where needed:
Name: Date: Blk: NOTES: BONDING Examine your periodic table to answer these questions and fill-in-the-blanks. Use drawings to support your answers where needed: I. IONIC BONDING Ionic bond: formed by the
More informationWhat determines whether a substance will be a solid, liquid, or gas? Thursday, April 24, 14
What determines whether a substance will be a solid, liquid, or gas? Answer: The attractive forces that exists between its particles. Answer: The attractive forces that exists between its particles. For
More informationCHEMISTRY 20 Formative Assessment Intermolecular Forces
CHEMISTRY 20 Formative Assessment Intermolecular Forces RECORD ALL RESPONSES IN THIS QUESTION BOOK STUDENTS ARE TO KEEP QUESTION BOOK AND ANSWER KEY AS PART OF THEIR STUDY MATERIALS 1. The high surface
More informationIMFA s. intermolecular forces of attraction Chez Chem, LLC All rights reserved.
IMFA s intermolecular forces of attraction 2014 Chez Chem, LLC All rights reserved. **London Dispersion Forces Also know as Van der Waals forces A momentary non symmetrical electron distribution that can
More informationUnit 6: Molecular Geometry
Unit 6: Molecular Geometry Molecular Geometry [6-5] the polarity of each bond, along with the geometry of the molecule determines Molecular Polarity. To predict the geometries of more complicated molecules,
More informationLondon Dispersion Forces (LDFs) Intermolecular Forces Attractions BETWEEN molecules. London Dispersion Forces (LDFs) London Dispersion Forces (LDFs)
LIQUIDS / SOLIDS / IMFs Intermolecular Forces (IMFs) Attractions BETWEEN molecules NOT within molecules NOT true bonds weaker attractions Represented by dashed lines Physical properties (melting points,
More informationChapter 12. Liquids: Condensation, Evaporation, and Dynamic Equilibrium
Chapter 12 Liquids: Condensation, Evaporation, and Dynamic Equilibrium Chapter Map Condensation (Gas to Liquid) Evaporation For a particle to escape from the surface of the liquid, it must meet the following
More informationMC Molecular Structures, Dipole Moments, Geometry, IMF Name: Date:
MC Molecular Structures, Dipole Moments, Geometry, IMF Name: Date: 2008 22. Which of the following is a nonpolar molecule that contains polar bonds? (A) F 2 (B) CHF 3 (C) CO 2 (D) HCl (E) NH 3 28. Which
More informationIntermolecular Forces
Intermolecular Forces H covalent bond (stronger) Cl H Cl intermolecular attraction (weaker) The attractions between molecules are not nearly as strong as the covalent bonds that hold atoms together. They
More informationTHE BIG IDEA: BONDING AND INTERACTIONS.
HONORS CHEMISTRY - CHAPTER 8 COVALENT BONDS OBJECTIVES AND NOTES - PART 2 - V12 NAME: DATE: PAGE: THE BIG IDEA: BONDING AND INTERACTIONS. Essential Questions 1. How is the bonding in molecular compounds
More informationChapter 11. Intermolecular Forces and Liquids & Solids
Chapter 11 Intermolecular Forces and Liquids & Solids The Kinetic Molecular Theory of Liquids & Solids Gases vs. Liquids & Solids difference is distance between molecules Liquids Molecules close together;
More informationAnnouncements. No class on Friday---faculty day at the Ateneo. Read Chapter 13--Solutions and start the homework problems posted on the blog
Announcements No class on Friday---faculty day at the Ateneo Read Chapter 13--Solutions and start the homework problems posted on the blog Quiz next week on Chapter 11 Electronegativity values from a table
More informationWeek 8 Intermolecular Forces
NO CALCULATORS MAY BE USED FOR THESE QUESTIONS Questions 1-3 refer to the following list. (A) Cu (B) PH 3 (C) C (D) SO 2 (E) O 2 1. Contains instantaneous dipole moments. 2. Forms covalent network solids.
More informationWhat factors affect whether something is a solid, liquid or gas? What actually happens (breaks) when you melt various types of solids?
States of Mattter What factors affect whether something is a solid, liquid or gas? What actually happens (breaks) when you melt various types of solids? What external factors affect whether something is
More informationCompare the strength of IMFs present in three liquids. The liquids are in separate containers. A. CH 3 CH 2 NH 2 (liquid) B. CH 3 CH 2 F (liquid)
Compare the strength of IMFs present in three liquids. The liquids are in separate containers. A. CH 3 CH 2 NH 2 (liquid) B. CH 3 CH 2 F (liquid) C. CH 3 CH 2 OH (liquid) Draw two 3D Lewis Structures of
More informationProperties of Liquids and Solids
Properties of Liquids and Solids World of Chemistry Chapter 14 14.1 Intermolecular Forces Most substances made of small molecules are gases at normal temperature and pressure. ex: oxygen gas, O 2 ; nitrogen
More informationLesson 1: Stability and Energy in Bonding Introduction
Lesson 1: Stability and Energy in Bonding Introduction Chemical bonding is the simultaneous attraction of two positive nuclei to negative electrons. Chemical bonding is said to be the glue that holds particles
More informationChemical bonding & structure
Chemical bonding & structure Ionic bonding and structure Covalent bonding Covalent structures Intermolecular forces Metallic bonding Ms. Thompson - SL Chemistry Wooster High School Topic 4.4 Intermolecular
More information-Atomic Bonding in Solids
-Atomic Bonding in Solids Three different types of primary or chemical bond are found in solids ionic, covalent, and metallic. For each type, the bonding necessarily involves the valence electrons; furthermore,
More informationIntermolecular Forces & Condensed Phases
Intermolecular Forces & Condensed Phases CHEM 107 T. Hughbanks READING We will discuss some of Chapter 5 that we skipped earlier (Van der Waals equation, pp. 145-8), but this is just a segue into intermolecular
More informationPOGIL 7 KEY Intermolecular Forces
Honors Chem Block Name POGIL 7 KEY Intermolecular Forces In chemistry we talk a lot about properties of substances, since the object of chemistry is substances and their properties. After learning different
More informationSalt vs. Sugar. 1. Ionic Compounds. 2. Molecular Compounds (Cont.) 12/18/2014. What is this Compound You Speak Of? Sodium Chloride Dissolving in Water
Salt vs. Sugar Unit 7: Chemical Compounds & Formulas Lesson#7.1: Types of Compounds What is this Compound You Speak Of? Compound: Any substance that is formed by the chemical bonding of atoms. We classify
More informationPolar molecules vs. Nonpolar molecules A molecule with separate centers of positive and negative charge is a polar molecule.
CHM 123 Chapter 8 8.5 8.6 Polar covalent Bonds and Dipole moments Depending on the relative electronegativities of the two atoms sharing electrons, there may be partial transfer of electron density from
More informationIntermolecular Actions IMI s. IMI Summary Sheet. Trends in the Strength of Intermolecular Attraction? 7/8/2013
Intermolecular Actions IMI s More Accurately: Interspecies Interactions What holds SPECIES together in liquids and solids? Species may be atoms or molecules or ions. Must distinguish between IMI s and
More informationIntermolecular Forces and Phase Equilibria
Intermolecular Forces and Phase Equilibria Chemistry 36 Spring 2002 Intermolecular Forces What happens to gas phase molecules when subjected to increased pressure? Volume occupied by gas decreases (IGL)
More informationLearning Check. Determine the VSEPRT geometry, bond angle, and hybridization of each indicated atom in the following molecule.
Learning Check Determine the VSEPRT geometry, bond angle, and hybridization of each indicated atom in the following molecule. 1 Types of Covalent Bonds 1. A sigma (σ) bond is formed by endto-end overlap
More informationIntermolecular Forces and Liquids and Solids. Chapter 11. Copyright The McGraw Hill Companies, Inc. Permission required for
Intermolecular Forces and Liquids and Solids Chapter 11 Copyright The McGraw Hill Companies, Inc. Permission required for 1 A phase is a homogeneous part of the system in contact with other parts of the
More informationUnit Five: Intermolecular Forces MC Question Practice April 14, 2017
Unit Five: Intermolecular Forces Name MC Question Practice April 14, 2017 1. Which of the following should have the highest surface tension at a given temperature? 2. The triple point of compound X occurs
More informationIonic Bonds. H He: ... Li Be B C :N :O :F: :Ne:
Ionic Bonds Valence electrons - the electrons in the highest occupied energy level - always electrons in the s and p orbitals - maximum of 8 valence electrons - elements in the same group have the same
More informationThe attractions that hold together the atoms in water and carbon dioxide can not be explained by ionic bonding. Ionic bonding =
In unit six, we discussed ionic compounds, which are generally crystalline solids with high melting points. Other compounds, however, have very different properties. Water is a liquid at room temperature.
More informationBonding. Chemical Bond: mutual electrical attraction between nuclei and valence electrons of different atoms
Chemical Bonding Bonding Chemical Bond: mutual electrical attraction between nuclei and valence electrons of different atoms Type of bond depends on electron configuration and electronegativity Why do
More informationGeneral Chemistry Multiple Choice Questions Chapter 5
1 Which of the following possesses a polar covalent bond? a NaCl (s) b O 2 (g) c Al (s) d SO 2 (g) 5.1 2 Which is the most electronegative atom? a Cl b Se c Al d Ca 3 Which of the following molecules has
More informationHomework 08 - Bonding Theories & IMF
HW08 - Bonding Theories & IMF This is a preview of the published version of the quiz Started: Jun 4 at 11:4am Quiz Instructions Homework 08 - Bonding Theories & IMF Question 1 A sigma bond... stems from
More informationElectonegativity, Polar Bonds, and Polar Molecules
Electonegativity, Polar Bonds, and Polar Molecules Some Definitions Electronegativity: the ability of an atom to attract bonding electrons to itself. Intramolecular forces: the attractive force between
More informationIntermolecular Forces and States of Matter AP Chemistry Lecture Outline
Intermolecular Forces and States of Matter AP Chemistry Lecture Outline Name: Chemical properties are related only to chemical composition; physical properties are related to chemical composition AND the
More informationCHEMICAL BONDING [No one wants to be alone] The Marrying of Atoms (AIM)
CHEMICAL BONDING [No one wants to be alone] The Marrying of Atoms (AIM) Associate Degree in Engineering Prepared by M. J. McNeil, MPhil. Department of Pure and Applied Sciences Portmore Community College
More informationof its physical and chemical properties.
8.4 Molecular Shapes VSEPR Model The shape of a molecule determines many of its physical and chemical properties. Molecular l geometry (shape) can be determined with the Valence Shell Electron Pair Repulsion
More informationChapter 11 Intermolecular Forces, Liquids, and Solids. Intermolecular Forces
Chapter 11, Liquids, and Solids States of Matter The fundamental difference between states of matter is the distance between particles. States of Matter Because in the solid and liquid states particles
More informationNOTES: 8.4 Polar Bonds and Molecules
NOTES: 8.4 Polar Bonds and Molecules ELECTRONEGATIVITY: We ve learned how valence electrons are shared to form covalent bonds between elements. So far, we have considered the electrons to be shared equally.
More informationTHE SOLIDS AND LIQUID STATES ATOMIC SOLIDS AND LIQUIDS
SCH4U1 - DVORSKY THE SOLIDS AND LIQUID STATES The physical properties of solids and liquids are strongly influenced by the forces of attraction between the particles within them, known as intermolecular
More informationIonic Compounds and Ionic Bonding
Ionic Compounds and Ionic Bonding Definitions Review: Crystal Lattice - 3D continuous repeating pattern of positive and negative ions in an ionic solid Formula Unit- smallest possible neutral unit of an
More informationBromine liquid vapor equilibrium vapor pressure temperature intermolecular forces Presentation
Bromine liquid vapor equilibrium vapor pressure temperature intermolecular forces Presentation Department of Chemistry & Biochemistry University of Oregon Eugene, Oregon 97403 USA Closed system vs Open
More informationElectrons and Molecular Forces
Electrons and Molecular Forces Chemistry 30 Ms. Hayduk Electron Configuration Atomic Structure Atomic Number Number of protons in the nucleus Defines the element Used to organize the periodic table 1 Bohr
More informationRed Beryl, Be 3 Al 2 Si 6 O 18. Liquids and
Red Beryl, Be 3 Al 2 Si 6 O 18 - Liquids and Solids Copyright Houghton Mifflin Company. All rights reserved. 16a 2 A Molecular Comparison of Liquids and Solids Figure 16.47: The number of molecules in
More informationChapter 12 Intermolecular Forces and Liquids
Chapter 12 Intermolecular Forces and Liquids Jeffrey Mack California State University, Sacramento Why? Why is water usually a liquid and not a gas? Why does liquid water boil at such a high temperature
More informationThe broad topic of physical metallurgy provides a basis that links the structure of materials with their properties, focusing primarily on metals.
Physical Metallurgy The broad topic of physical metallurgy provides a basis that links the structure of materials with their properties, focusing primarily on metals. Crystal Binding In our discussions
More informationCovalent Bonding. In nature, only the noble gas elements exist as uncombined atoms. All other elements need to lose or gain electrons
In nature, only the noble gas elements exist as uncombined atoms. They are monatomic - consist of single atoms. All other elements need to lose or gain electrons To form ionic compounds Some elements share
More information9/2/10 TYPES OF INTERMOLECULAR INTERACTIONS
Tro Chpt. 11 Liquids, solids and intermolecular forces Solids, liquids and gases - A Molecular Comparison Intermolecular forces Intermolecular forces in action: surface tension, viscosity and capillary
More informationChapter 6. Chemical Bonding
Chapter 6 Chemical Bonding Section 6.1 Intro to Chemical Bonding 6.1 Objectives Define chemical bond. Explain why most atoms form chemical bonds. Describe ionic and covalent bonding. Explain why most chemical
More informationChapter 11. Intermolecular forces. Chapter 11 1
Chapter 11 Intermolecular Attractions and the Properties of Liquids and Solids 1 2 Intermolecular forces Forces of attraction between molecules Directly dependent on the distance between the molecules
More informationChapter Intermolecular attractions
Chapter 11 11.2 Intermolecular attractions Intermolecular Attractions and the Properties of Liquids and Solids Intermolecular forces control the physical properties of the substance. Intramolecular forces
More informationAdvanced Chemistry Liquid & Solids Test
Advanced Chemistry Liquid & Solids Test Name: Multiple Choice 1) Which one of the following statements about liquids and solids is generally false? a) The rate of diffusion is lower in solids b) The density
More information