Getting Started with the Lightcloud Installation App. LC Installer. Overview Features Installation Steps. Lightcloud
|
|
|
- Milo Patterson
- 5 years ago
- Views:
Transcription
1 Getting Started with the Lightcloud Installation App LC Installer Overview Features Installation Steps Lightcloud
2 Overview Use the Installer App to scan and organize Lightcloud Devices. The Device information is then seamlessly sent to RAB for free, remote commissioning. It s really that simple. Features Multi-Site Multi-Gateway Assign Devices to Rooms Assign Device Zone Names Assign Dimmers to Controllers Create Installation Notes The Installer App is for setting up/commissioning a Lightcloud system. For lighting controls and management, please use the Lightcloud App. Questions? 1 (844) - LIGHTCLOUD LC Installer Getting Started with the Lightcloud Installation App
3 Follow these easy steps to install your Lightcloud site. 1. Position the Gateway The Gateway should be located centrally to as many Lightcloud devices as possible and have a strong cellular signal. Test the Gateway Signal Strength must be green before installation. POWER SIGNAL STRENGTH SYSTEM STATUS Install one Gateway and related devices at a time. LC Installer Getting Started with the Lightcloud Installation App 1
4 2. Scan the Gateway's Device ID The Device ID is used to identify each device in the system. Device IDs LC Installer Getting Started with the Lightcloud Installation App 2
5 3. Permanent Power to the Gateway Wire the Gateway for permanent, unswitched power. Don't use a plug-in power cord for permanent installation. LC Installer Getting Started with the Lightcloud Installation App 3
6 4. Position Devices Lightcloud devices send, receive, and repeat wireless signals. Each device needs to be within range of at least one other device and have a pathway back to the Gateway. LC Installer Getting Started with the Lightcloud Installation App 4
7 4. Position Devices Continued Indoor Range: 100 feet through standard building materials such as drywall. Outdoor Range: 1000 feet without any obstructions. Use the chart below to see affects of various building materials. Wireless Range in Feet Material 0ft 10ft 20ft 30ft 40ft 50ft 60ft 70ft 80ft 90ft 100ft Glass 0.25 (-3ft) Glass 0.5 (-5ft) Lumber 3 (-10ft) Brick 3.5 (-15ft) Masonry Block 8 (-20ft) Brick 7 (-30ft) Concrete 4 (-40ft) Brick 10.5 (-45ft) Masonry Block 16 (-45ft) Coated/Insulated Glass (-55ft) Concrete 8 (-80ft) Reinforced Concrete 3.5 (-85ft) Masonry Block 24 (-90ft) Concrete 12 (-95ft) = Signal Range = Signal Loss Coated/Insulated Glass with Thin Metal Layer (-100ft) LC Installer Getting Started with the Lightcloud Installation App 5
8 5. Scan Device Scan Device ID and verify that the number scanned correctly. Device IDs LC Installer Getting Started with the Lightcloud Installation App 6
9 6. Complete Device Information Be as detailed as possible. LC Installer Getting Started with the Lightcloud Installation App 7
10 7. Install Devices Wire for permanent, unswitched power. LOAD LOAD All Devices are receiving a constant hot feed BREAKER BOX OR CONSTANT POWER SOURCE LC Installer Getting Started with the Lightcloud Installation App 8
11 8. Test Devices Ensure the status indicator is solid Green and test dimming and switching using the device identification button. DEVICE IDENTIFICATION BUTTON Lightcloud Controller Illuminated when device is powered Press once to highlight this device in the Lightcloud Application Press twice to toggle circuit on and off Press twice and hold to set dim level Press and hold for 10 seconds to remove this device from a Lightcloud network Blinks when device is indicated from the Lightcloud Application SIGNAL INDICATOR Illuminates when the device receives a message and indicates the strength of the signal. 3 - Best signal 2 - Acceptable signal 1 - Unacceptable signal Consult the Finding a Location section for more information STATUS INDICATOR Solid GREEN when connected to your Lightcloud network. Blinking RED when not connected. The device will automatically continue trying to connect to a network in Setup Mode. LC Installer Getting Started with the Lightcloud Installation App 9
12 9. Send to RAB After scanning and installing all of the devices, submit the information by pressing 'Send to RAB'. LC Installer Getting Started with the Lightcloud Installation App 10
13 More Info View the Planning Guidelines Visit lightcloud.com/resources Questions? Free Support Call 1(844)LIGHTCLOUD LC Installer Getting Started with the Lightcloud Installation App 11
14 Interested? lightcloud.com 1 (844) LIGHTCLOUD 2018 RAB Lighting, Inc. RAB is continually improving our products. Specifications may change without notice. The designs of RAB fixtures are protected under U.S. and international intellectual property laws.
WE RE HERE TO HELP: 1 (844) LIGHTCLOUD
Welcome Controller LCCONTROL20/D10 WE RE HERE TO HELP: 1 (844) LIGHTCLOUD 1 (844) 544-4825 support@lightcloud.com Contents Lightcloud Controller NPT Nut O-ring Instruction Manual Wire Nuts x 4 x 2 Specifications
Device Specifications
Manual Device Specifications PART NUMBER LCGATEWAY ELECTRICAL The Lightcloud Gateway is designed to be hard-wired to AC power by a qualified electrician. INPUT 120-277 VAC, 50/60 Hz 60-45mA BATTERY Li-ion
Lightcloud Application
Controlling Your Lightcloud System Lightcloud Application Lightcloud Application Navigating the Application Devices Device Settings Organize Control Energy Scenes Schedules Demand Response Power Up State
Common Lightcloud Wiring Applications. Wiring Diagrams. Overview Controller Dimmer Gateway Integrator Sensor Touch. Lightcloud
Common Lightcloud Wiring Applications Wiring Diagrams Overview Dimmer Gateway Integrator Sensor Touch Lightcloud Wiring Diagrams The following diagrams are commonly used for Lightcloud installations. If
MAGMA NOTE! 21+ USER MANUAL
21+ MAGMA USER MANUAL NOTE! Please do not put this product away or leave it for extended periods of time with low charge because if the battery falls below 2% then it will no longer accept a charge. Thank
RainMachine Touch HD- 12 Quick- Start Guide
RainMachine Touch HD- 12 Quick- Start Guide Table of Contents Wiring Diagram... 3 Hardware Installation... 6 Initial Setup... 5 How it works..7 Operation... 8 Creating first program... 8 Zones... 11 Zones
MODE button MAX/MIN button CHANNEL button / C/ F / RCC button SNOOZE / LIGHT button Battery compartment A/C in-jack 3. 4.
KL4912 Desktop weather station Instruction Manual Introduction This weather station comes with backlight, indoor and outdoor temperature & humidity display, and alarm clock with calendar. Fig. 1 Front
Series and Parallel. How we wire the world
Series and Parallel How we wire the world Series vs Parallel Circuits Series Circuit Electrons only have one path to flow through. Parallel Circuit There are MULTIPLE paths for the current to flow through.
RainMachine Mini- 8 Quick- Start Guide
RainMachine Mini- 8 Quick- Start Guide Table of Contents Inside the Box... 3 Wiring Diagram... 4 Hardware Installation... 5 Initial Setup... 6 How it works... 13 Operation... 8 Program Properties... 10
Emergency lighting units EM Inverter
T T TC- TC-F DE TC- TC-SE TC-TE TC-DD Tc EM G, 0 0 V 0/0 Hz BASIC version Product description Emergency lighting supply unit for manual testing For linear and compact fluorescent lamps ow-profile casing
Today s Weather 24 Hour Forecaster
1380 Today s Weather 24 Hour Forecaster Instruction Manual The Taylor 24 Hour Forecaster will provide you with actual current temperatures. Predict the weather conditions for the next 24 hours as well
CONTENTS. Batteries. La Crosse Technology, Ltd Page 1
515-1316 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS
6 + WARNING: CHOKING HAZARD - Small parts/small ball(s). Not for children under 3 years.
6 + 2055 WARNING: CHOKING HAZARD - Small parts/small ball(s). Not for children under 3 years. A word about Pluto... Since it was discovered in 1930, Pluto has been considered the ninth planet of our solar
RainMachine Pro-16 Quick-Start Guide
RainMachine Pro-16 Quick-Start Guide Table of Contents Inside the box... 3 Installation... 4 1. Fasten the unit... 4 2. Electrical Wiring... 4 3. Power Up... 4 Wiring Diagram... 5 Initial Setup... 6 Basic
WS-7213U Wireless 433 MHz Weather Station Instruction Manual TABLE OF CONTENTS. Figure 2. Figure 1
WS-7213U Wireless 433 MHz Weather Station Instruction Manual TABLE OF CONTENTS Topic Page Inventory of Contents 3 Additional Equipment 4 Quick Setup 5-8 Detailed Setup Guide Battery Installation 9-11 Setting
Circuits. PHY2054: Chapter 18 1
Circuits PHY2054: Chapter 18 1 What You Already Know Microscopic nature of current Drift speed and current Ohm s law Resistivity Calculating resistance from resistivity Power in electric circuits PHY2054:
What would be the new current (in terms of I) if the voltage is doubled and the same resistance is used?
Test Name: Electricity Unit Test Test Id: 50824 Date: 12/15/2015 Section Which of the following statements correctly describes the relationship between current (measured in amperes), resistance (measured
Precision Circuits Inc
Precision Plex brings to one central location the control of many of the RV s low voltage appliances. In a typical RV wiring scheme, the battery is wired to a fuse block, which distributes power to individual
Kingspan Smart-Lite Kite Luminaire
Kingspan Smart-Lite Kite Luminaire The Kite High Bay products are designed to complement the ZEL (Zero Energy Lighting) initiative championed by Kingspan. The combination of pressure die-cast aluminium
WS-7047TWC Wireless 433 MHz Weather Station With Rainfall and Temperature. Instruction Manual
WS-7047TWC Wireless 433 MHz Weather Station With Rainfall and Temperature Instruction Manual TABLE OF CONTENTS Topic Page Inventory of Contents 2 Additional Equipment 2 Quick Setup 3 Detailed Setup Guide
SPECIFICATION SHEET : FHS2-UNV-36L
SPECIFICATION SHEET : FHS2-UNV-36L This Is An Original Product From Fulham Co., Inc Description : Emergency LED Driver For Back-up Lighting This driver will operate constant current LED arrays with a working
ShowCUBE. ShowCUBE DMX RGBWA+UV Eternal Lighting Updated 01/2015
ShowCUBE 1 Introduction: Thank you for your purchase. The ShowCUBE DMX RGBWA+UV is a DMX intelligent LED par light. This LED par light is for the serious production company looking for high powered LED
Explanation: The factory restart returns the atomic clock to an out-of-the-box state and often resolves an issue.
404-1220 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS
SPECIFICATION SHEET : FHS2-UNV-36L
SPECIFICATION SHEET : FHS2-UNV-36L This Is An Original Product From Fulham Co., Inc Description : For Back-up Lighting This driver will operate constant current LED arrays with a working voltage between
Microcare LCD Solar MPPT User Documentation
Microcare LCD Solar MPPT User Documentation 1 CONTENTS 1. INTRODUCTION. 3 1.1. General Description 1.2. Key Features 1.3. Important Notices 1.4. Recommended Array Sizes 1.5. MPPT Description 1.6. MPPT
David Southam Regional Manager Europe & Si Horton 3D Documentation
David Southam Regional Manager Europe North @FaroFocus3DUK & Si Horton 3D Documentation Engineer @shorton_faro FARO PRODUCT LINES Press any key to continue FARO Laser Scanner Focus 3D X 130 ±2 mm 130 m
Current protection I 2 t long-time protection
I 2 t long-time protection The long-time protection function protects cables against overloads. This function is based on true rms measurements. It is possible to select either I 2 t long-time protection
SC125MS. Data Sheet and Instruction Manual. ! Warning! Salem Controls Inc. Stepper Motor Driver. Last Updated 12/14/2004
SC125MS Stepper Motor Driver Salem Controls Inc. Last Updated 12/14/2004! Warning! Stepper motors and drivers use high current and voltages capable of causing severe injury. Do not operate this product
SOLIDWORKS Simulation Time Based Thermal Stress
SOLIDWORKS Simulation Time Based Thermal Stress Overview Given that SOLIDWORKS Simulation is capable of running a transient thermal analysis on models it leads to the question of whether the transient
Secured Series Front End Reader Installation Instructions Proximity Reader (ProxPro, ProxPro w/keypad, MiniPro, Thinline II)
Secured Series Front End Reader Installation Instructions Proximity Reader (ProxPro, ProxPro w/keypad, MiniPro, Thinline II) Installation Procedure: Step 1: Check the Packing List Step 2: Mount the Proximity
Installation Instructions: ICON Anti-Condensate Controller
TECHNICAL BULLETIN Installation Instructions: ICON Anti-Condensate Controller System Overview The ICON Anti-Condensate Controller System (pat. pend.) is a stand-alone controller for antisweat heaters in
SOTM LAB: P16 OHM S LAW I. TEACHER NOTES & GUIDELINES TITLE OF LAB: Ohm s Law DEVELOPERS OF LAB:
SOTM LAB: P16 OHM S LAW I. TEACHER NOTES & GUIDELINES TITLE OF LAB: Ohm s Law DEVELOPERS OF LAB: John Lane, JD853@maristb.marist.edu Taylor Pancoast, JD573@maristb.marist.edu OVERVIEW OF LAB DESCRIPTION
DMX-controlled motorised shutters
Manual JALOUSIE 2 Specialist products JAL2 Ø206 V4 JAL2 Ø280 V6 JAL2 Ø340 V6 JAL2 Ø404 V4 DMXcontrolled motorised shutters Valid since: 17/11/11 Software version: V2.06 DN40977200A Robert Juliat S.A.S.
ph Probe ReallyEasyData com
ph Probe 9200001 Uses Whether you re monitoring ph for chemistry, physical science, life science, or earth science activity, this ph meter offers accurate readings in a convenient format. Use the RED ph
WS-7211U Wireless 433 MHz Weather Station. Instruction Manual
WS-7211U Wireless 433 MHz Weather Station Instruction Manual TABLE OF CONTENTS Topic Page Quick Setup 3-5 Inventory of Contents 6-7 Detailed Setup Guide Battery Installation 7 Setting the Time 8 Features
STATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
User's Guide. DISTO online. Leica Geosystems
User's Guide DISTO online Leica Geosystems Copyright 2001 by PMS Photo Mess Systeme AG. All rights reserved. This manual describes the versions 2.x of the program DISTO online. PMS PHOTO-MESS-SYSTEME AG
TM 200 U Special determination of U coefficient
TM 200 U Special determination of U coefficient Preamble This document provides instructions for easy use in the solely to determine the U coefficient U. This instrument is also supplied with a user manual
Project. Project Location. Catalog #
Location Catalog # A. Description Aris is a low-profile luminaire that is ideal for undercabinet, task and display case lighting in both residential and commercial applications. Its 0." high x." cross-section
Snow Melting Design Guide: Heated Walkways and Paths
Snow Melting Design Guide: Heated Walkways and Paths What is a Snow Melting System? Have you ever seen snow fall on an already warm car? It melts instantly. This is the essential idea behind snow melting
WeatherHub2 Quick Start Guide
WeatherHub2 Quick Start Guide Table of Contents 1 Introduction... 1 2 Packing List... 1 3 Connections... 1 4 IP Addressing... 2 5 Browser Access... 3 6 System Info... 3 7 Weather Station Settings... 4
Obtain an optical "bench" setup (there should be three sliding mounts on the calibrated horizontal bar. The setup is shown in the diagram below.
Astronomy 100 Name(s): Exercise 4: Telescopes and spectroscopy Once the various focal issues are resolved, magnification of a small image is a significant consideration for a telescope. Though a planet
A clock designed in close consultation with people living with Dementia.
1. Product Name Day Clock 2. Product Code 55787 3. Colour As shown 4. Brief Description A clock designed in close consultation with people living with Dementia. 5. Contents 1 x Day Clock 6. Snoezelen Stimulations
DS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
Model: WT-3181PL Instruction Manual DC: Indoor/Outdoor Atomic Wall Clock. Get Started
Model: WT-3181PL Instruction Manual DC: 041614 18 Indoor/Outdoor Atomic Wall Clock Round Battery Cover Get Started Step 1: Remove the round battery cover from the back of the clock. Step 2: Insert 1 fresh
Tempest Lighting Product Training. November 2010
Tempest Lighting Product Training November 2010 Tempest Whatever the Weather High-power lights/projectors and outdoor climates means trouble! Rain, Snow Sunlight, Heat and Cold Condensation especially
Electricity and Electromagnetism SOL review Scan for a brief video. A. Law of electric charges.
A. Law of electric charges. Electricity and Electromagnetism SOL review Scan for a brief video The law of electric charges states that like charges repel and opposite charges attract. Because protons and
Power Requirements... 8
308-1425C FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS
Required Items: PEL Phase Order Indicator Blinking Red How to Determine WHY indicator is blinking.
PEL Phase Order Indicator Blinking Red How to Determine WHY indicator is blinking. The PEL family of Power and Energy Loggers have a Phase Order light on their front panel. This indicator lights up and
AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL
AIR CONDITIONER (SPLIT TYPE) SERVICE MANUAL FILE No. A10-023-1 REVISION 1 : Mar.2012 Re-edit version.( file volume down) Contents have NOT been changed. Model name: RAS-M10PKVP-E RAS-M13PKVP-E RAS-M16PKVP-E
Consists of several displays that provide you with useful information. Odometer, Trip meter. distribution monitor. Bluetooth HandsFreeLink
M U L T I - I N F O R M A T I O N D I S P L A Y ( M I D ) Consists of several displays that provide you with useful information. A c c e s s i n g t h e M I D M a i n D i s p l a y s, Trip meter Trip computer
Zero-Point Adjustment Instruction (Initial)
When either load cell or digital amplifier ( a.k.a Control Box for Turnover Protection System ) is replaced, do Zero-Point Adjustment as per the instruction. 1, Place of load cell and Load Cell Amplifier
S84060 FAQS CONTENTS
S84060 FAQS We are weather enthusiasts like you and know proper running equipment is important. These FAQS provide valuable information on setup, positioning, and troubleshooting your station. We recommend
6.Ebz!boe!8.Ebz!!! Gpsfdbtufst!!! G U I D E n catio Lo
GUIDE Location Contents Ambient Devices TM, the Ambient logo, Ambient Information Network TM and Ambient 5-Day and 7-Day Forecasters TM are trademarks or registered trademarks of Ambient Devices, Inc.
Snow Melting Design Guide: Accessibility Ramps (Concrete and Pavers)
Snow Melting Design Guide: Accessibility Ramps (Concrete and Pavers) What is a Snow Melting System? Have you ever seen snow fall on an already warm car? It melts instantly. This is the essential idea behind
Integrated Suppression Module
TM ISMS u r g e P R O T E C T I O N Integrated Suppression Module ISM Installation, Operation and Maintenance Manual PN 750-0072-010 Rev A01 Electrical Transient Suppression Filter Systems 2 The ISM TM
Single Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
FAQS. La Crosse Technology, Ltd. Page 1
308-1412 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS
2018 North Carolina Residential Code Prescriptive Tables for Selection of Support Elements for Beams, Girders, and Headers: Example Problems
2018 North Carolina Residential Code Prescriptive Tables for Selection of Support Elements for Beams, Girders, and Structural Building Components Association (SBCA) August 10, 2018 SBCA is an APPROVED
Activity 4: The Electric-Circuit Interaction
RECORD SHEET Activity 4: The Electric-Circuit Interaction Name Date Class Key Questions 1. 2. Explore Your Ideas Experiment 1: When does an electric-circuit interaction occur? 1. Draw a picture of the
TG646 WEATHER STATION
TG646 WEATHER STATION WITH REMOTE SENSOR User Manual CONGRATULATIONS ON PURCHASING THE THINK GIZMOS WIRELESS WEATHER STATION. BY FOLLOWING THESE INSTRUCTIONS CAREFULLY IT WILL BE A GREAT ASSET IN YOUR
Reverse Engineering Project EEL 4906 Engineering Design/Professionalism
Reverse Engineering Project EEL 4906 Engineering Design/Professionalism DISASSEMBLY OF PQM200 SURGE PROTECTION DEVICE CREATED BY C R U Z, J A I M E E D O B B S, M I C H A E L G U Z M A N, F R A N K O G
SPECIFICATION SHEET :FH6-DUAL-3000L This Is An Original Product From Fulham Co., Inc ELECTRICAL DATA
Project Type Model # emarks Description :Firehorse Emergency Ballast for use with or without AC ballast designed to add emergency lighting when main AC power is interrupted for minimum of 90 minutes at
W 9 L: Laser photoelectric switches: small, light and reliable
W 9 Laser photoelectric switches Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 9 L: Laser photoelectric switches: small, light and reliable The
CONTENTS. Power Requirements... 8
WS-9057U-IT FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader
Quick Start Guide New Mountain Visit our Website to Register Your Copy (weatherview32.com)
Quick Start Guide New Mountain Visit our Website to Register Your Copy (weatherview32.com) Page 1 For the best results follow all of the instructions on the following pages to quickly access real-time
New York State. Electronic Certificate of Need. HCS Coordinator. Overview. Version 1.0
New York State Electronic Certificate of Need (NYSE-CON) New York State Electronic Certificate of Need HCS Coordinator Overview Version 1.0 HCS Coordinator Overview 1 2/17/2011 NYS Department of Health
C85485 FAQS CONTENTS. Temperature Alerts... 7 Set Alerts:... 8
C85485 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader CONTENTS
50/60 Hz. ecocirc XL and XLplus. high efficiency WET ROTOR circulators. ErP 2009/125/EC
/ Hz ecocirc XL and XLplus high efficiency WET ROTOR circulators FOR COMMERCIAL HEATING AND COOLING applications ErP 9/1/EC Cod. 1971 Rev. C Ed.11/1 Lowara, ecocirc, Xylect are trademarks of Xylem Inc.
MODEL NAME : LLDMWW0-15K*0*A
Eagle Eye (Outdoor LED Module) Application Note MODEL NAME : LLDMWW0-15K*0*A RoHS Compliant HALOGEN FREE (30)-4022 1 / 16 CONTENTS 1. Product Description 3/16 2. Specifications 2.1. Chromaticity Bins for
Instruction Manual. Solar Weather Centre With Wireless Weather Vane. Product Code: WS5056C. Solar Powered Outdoor Weather Data Collector
Solar Weather Centre With Wireless Weather Vane Solar Powered Outdoor Weather Data Collector Indoor Receiver Instruction Manual Product Code: WS5056C TECHNICAL DETAILS Thank you for purchasing the Holman
Wireless Weather Station Instruction Manual
Wireless Weather Station Instruction Manual I. FEATURES 1. Wireless temp.& humidity 2. Radio-controlled clock (RCC) 3. Weather forecast 4. Weather trend 5. Display of barometric pressure with bar chart
CAPTURING THE DAYLIGHT DIVIDEND
CAPTURING THE DAYLIGHT DIVIDEND DaySwitch Demonstration Project I. Project Title: Capturing the Daylight Dividend DE-FC26-02NT41497 II. Project Sponsors: U. S. Department of Energy New York State Energy
Cove Light AC HO / HO Graze
Date: Quantity: Company: Project: Cove Light AC HO / HO Graze The Cove Light AC HO offers a range of cold, neutral, or warm white with a 120x120 degree beam angle for general lighting, wall washing, and
Sample Alignment Part
Sample Alignment Part Contents Contents 1. How to set Part conditions...1 1.1 Setting conditions... 1 1.2 Customizing scan conditions and slit conditions... 6 2. Sample alignment sequence...13 2.1 Direct
PHASED OUT. FL ballasts Electronic dimming. PCA TC BASIC Y II, W BASIC compact
EL Product description Processor-controlled ballast with y II inside Highest possible energy class CELMA EEI = A BAT Noise-free precise control via DSI signal, switchdim or corridorfunction Nominal life
S P E C I F I C A T I O N S
F I N E L I T E S P E R S O N A L L I G H T I N G S Y S T E M S P E C I F I C A T I O N S 2.5 0.8 A C T U A L S I Z E ld 3 W D E S K L A M P Initial illuminance values in footcandles calculated using LM79
CONTENTS. La Crosse Technology, Ltd. Page 1
WS-9133BK-IT- WS-9133T-IT FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader
Last updated: Copyright
Last updated: 2012-08-20 Copyright 2004-2012 plabel (v2.4) User s Manual by Bioinformatics Group, Institute of Computing Technology, Chinese Academy of Sciences Tel: 86-10-62601016 Email: zhangkun01@ict.ac.cn,
Application Note - SolarEdge Inverters, Power Control Options
Version 3, December 2017 Application Note - SolarEdge Inverters, Power Control Options Version History Version 3 (December 2017) Added Active Power ramp up option Added new active power phase balancing
Lamp and Control Panel (Lamp Panel)
www.reinhausen.com Lamp and Control Panel (Lamp Panel) Operating Instructions BA 47/0 EN NOTE! Changes may have been made to a product after going to press with this documentation. We expressly reserve
PHY222 Lab 8 - Magnetic Fields and Right Hand Rules Magnetic forces on wires, electron beams, coils; direction of magnetic field in a coil
PHY222 Lab 8 - Magnetic Fields and Right Hand Rules Magnetic forces on wires, electron beams, coils; direction of magnetic field in a coil Print Your Name Print Your Partners' Names You will return this
BIOS. Weather. 266BC Wireless Wind Chill and Humidex Thermometer. Thermomètre sans fil pour indices de refroidissement éolien et humidex
Weather BIOS 266BC Wireless Wind Chill and Humidex Thermometer Thermomètre sans fil pour indices de refroidissement éolien et humidex Monitor/Moniteur ite r : 4. 5. 6. A. B. C. D. E. 1. 2. 3. Transmitter/Transmetteur
POINTS OF CAUTION BEFORE USE...
INSTRUCTION MANUAL NPN DISCRETE INPUT & NPN TRANSISTOR OUTPUT MODULE, 6 points each (-I/-II, e-con connector) MODEL BEFORE USE... Thank you for choosing M-System. Before use, check the contents of the
Sample Alignment (2D detector) Part
Sample Alignment (2D detector) Part Contents Contents 1 How to set Part conditions...1 1.1 Setting conditions... 1 1.2 Customizing scan conditions and slit conditions... 6 2 Sample alignment sequence...13
Power Requirements... 9
C83332/C83349 FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader
IR F ( C) ENGLISH INSTRUCTION MANUAL. Thermometer
INSTRUCTION MANUAL Thermometer DUAL-LASER TARGETING 12:1 DISTANCE- TO-SPOT RATIO AUTO-SCAN MAX/MIN/AVG/DIFF HIGH/LOW ALARM BACKLIT DISPLAY AUTO POWER-OFF ADJUSTABLE EMISSIVITY IR5 2m -22 752 F (-30 400
2.12. Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + 60 C - nllk W - 58 W for Zone 2 and 22
.1 Ex-Linear light fittings for fluorescent lamps - max. ambient temperature + C - nllk 09 18 W - 58 W for Zone and The lighting solution for high temperatures up to C The linear luminaires series nllk
Thermal-Magnetic Circuit Breaker 2210-T2...
Thermal-Magnetic Circuit Breaker 0-T... Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Featuring
WeatherHawk Weather Station Protocol
WeatherHawk Weather Station Protocol Purpose To log atmosphere data using a WeatherHawk TM weather station Overview A weather station is setup to measure and record atmospheric measurements at 15 minute
TAKE ROLL CALL TO DETERMINE IF THERE IS A QUORUM OF MEMBERS PRESENT
LAWRENCE SIGN CODE BOARD OF APPEALS AGENDA JULY 5, 2018 6:35 P.M., CITY COMMISSION MEETING ROOM, FIRST FLOOR OF CITY HALL, SIXTH AND MASSACHUSETTS STREET, LAWRENCE, KANSAS CALL THE MEETING TO ORDER TAKE
XR Analog Clock - Manual Setting Model Troubleshooting Guide
Primex XR 72MHz Synchronized Time Solution XR Analog Clock - Manual Setting Model Troubleshooting Guide 2018 Primex. All Rights Reserved. The Primex logo is a registered trademark of Primex. All other
ECE 3060 VLSI and Advanced Digital Design. Testing
ECE 3060 VLSI and Advanced Digital Design Testing Outline Definitions Faults and Errors Fault models and definitions Fault Detection Undetectable Faults can be used in synthesis Fault Simulation Observability
Thermal overload. Operation
Thermal overload ANSI code 49 function n Operation F431 This function simulates the heat rise in the protected equipment using the current measurements taken on two (I1 and I3) or three phases.it complies
2-input AND gate with open-drain output. The 74AHC1G09 is a high-speed Si-gate CMOS device.
74HC1G09 Rev. 02 18 December 2007 Product data sheet 1. General description 2. Features 3. Ordering information The 74HC1G09 is a high-speed Si-gate CMOS device. The 74HC1G09 provides the 2-input ND function
Have a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT.
Have a look at the following video which shows an invention developed in the High-Low Tech Lab at MIT. What is the special property of the ink the researchers have invented? We will investigate which materials
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education
www.smarteduhub.com UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education *4019966178* PHYSICS 0625/06 Paper 6 Alternative to Practical May/June 2007
Student Activity Sheet- Denali Topo Map
Student Activity Sheet- Denali Topo Map Directions: Follow the steps in order and answer the associated questions as you proceed through the activity. The first part of the activity will be guided by your
W FAQS TABLE OF CONTENTS
327-1414W FAQS The links below will work in most PDF viewers and link to the topic area by clicking the link. We recommend Adobe Reader version 10 or greater available at: http://get.adobe.com/reader TABLE
Exam 3--PHYS 202--S15
Name: Class: Date: Exam 3--PHYS 202--S15 Multiple Choice Identify the choice that best completes the statement or answers the question 1 Consider this circuit Which of these equations is correct? 3 Which